Autologous Bone Graft Research Articles

The Treatment of Periprosthetic Fracture Revision of the Humerus with “Bamboo Support” Structural Allograft Technique—Atrophic Non-Union of a Post-Operative Periprosthetic Fracture after Reverse Total Shoulder Arthroplasty: A Case Report

Periprosthetic fractures are a serious complication of joint replacement surgery. With the growing prevalence of reverse total shoulder arthroplasty (RTSA), the incidence of relatively uncommon periprosthetic humeral fractures has increased. Here, we present the unique case of a 74-year-old woman who developed atrophic non-union after plate osteosynthesis for a periprosthetic fracture associated with RTSA. Fixation failure was evident 3 months after the surgical intervention; the patient underwent a 3-month course of arm sling immobilization. However, bone resorption continued, and varus angulation of the fracture developed. In this case, surgical strategy involved the use of long proximal humerus internal locked system plate (DePuy Synthes, Paoli, PA, USA), augmented with autologous iliac bone graft and allogenic humerus structural bone graft with the “bamboo support technique”, fixed with Cable System (DePuy Synthes, Paoli, PA, USA). No reports have addressed the management of failed periprosthetic fractures using allogeneic humeral strut bone grafts. This report aims to fill the gap by presenting a novel surgical technique for the management of periprosthetic fractures associated with RTSA in case of treatment failure.

Os lunatum reconstruction with autogenous bone graft from the medial condyle of the femur for Kienböck's disease: a case report

This case report outlines the management of a 43-year-old man suffering from chronic wrist pain due to Kienböck's disease. In 2019, the patient underwent os lunatum reconstruction surgery at Hospital of Traumatology and Orthopedics (TOS), utilizing a femur medial condyle autologous bone graft-a rarely reported techinque. Four years postoperatively patient underwent a follow-up visit, the patient exhibited substantial improvements in pain relief and functionality, evidenced by a QuickDASH score of 2 points, indicating minimal disability. Despite these positive outcomes, nuanced limitations in specific wrist movements and a subtle decrease in grip strength were noted. Notably, the patient reported discomfort in the left knee, the donor site for the autologous graft. This case contributes valuable insights into the feasibility and challenges associated with the femur medial condyle autologous bone graft technique for Kienböck's disease. The findings underscore the need for ongoing refinements and long-term monitoring, considering the patient's subjective experiences and the impact on both the wrist and the donor site. The study adds to the limited body of literature on unconventional surgical approaches for Kienböck's disease, guiding future research endeavors and refining the application of femur medial condyle autologous bone grafts in orthopedic practice.

Effectiveness of a two-stage posterior-anterior–posterior surgery using subcutaneously preserved autologous bone grafts for adult spinal deformity: a retrospective observational study

BackgroundTo achieve optimal correction of rigid kyphoscoliosis, we developed a novel two-stage posterior-anterior–posterior (PAP) surgery using subcutaneously preserved autologous bone grafts. This study aimed to investigate the effectiveness of two-stage PAP surgery versus single-stage anterior–posterior (AP) surgery.MethodsThis was a retrospective analysis of patients undergoing combined anterior–posterior long-level fusion for adult spinal deformity (ASD) with a minimum 2-year follow-up. The indications for two-stage PAP surgery were rigid thoracolumbar deformity associated with hypertrophic facet arthritis and/or a large pelvic incidence–lumbar lordosis mismatch of > 25°. In the first stage of PAP surgery, pedicle screw insertion and multilevel Ponte osteotomies were performed. The resected local bone was embedded under sutured fascia. One week later, the embedded bone was retrieved in the right lateral position and used as an autograft for lateral lumbar interbody fusion. Final deformity correction was performed in the prone position.ResultsFrom January 2018 to April 2021, 12 and 16 patients with ASD underwent two-stage PAP surgery (PAP group) and single-stage AP surgery (AP group), respectively. Although PAP surgery was associated with a significantly longer operation time, the total blood loss volume was significantly less in the PAP group than the AP group. Compared with the AP group, the PAP group showed significantly larger postoperative changes in radiological parameters in the sagittal and coronal planes. The overall complication rate did not differ significantly between the two groups.ConclusionTwo-stage PAP surgery provided effective correction of rigid kyphoscoliosis without increasing blood loss and postoperative complication rates.

Reconstruction of the orbitozygomatic framework: State of the art and perspectives

The reconstruction of the whole orbitozygomatic framework (OZF) is complex and can be encountered in cases of congenital midface deformity, after tumor ablative surgery and in severe facial trauma. Nowadays, surgeon has a wide range of available techniques that have continually grown over the past years, optimizing the surgical management and the aesthetical outcomes. Among them, the autologous bone graft (ABG) remains one of the most suitable options : ABG is easy to harvest and has optimal biological properties for bone healing. It can be tailored to the patient anatomy thanks to the recent advances in computer-assisted surgery. However, substantial drawbacks remain such as the early resorption of the non-vascularized graft, the need of a donor site and its potential morbidity. Alloplastic reconstruction is another option that can resolve both the resorption issue and the donor site morbidity. Moreover, the 3D-printing technologies also allows the manufacturing of patient specific implants. However, alloplastic materials have a variable success, especially due to the high risk of infection or exposure. Consequently, regenerative medicine is a promising field that aims to find a procedure without the disadvantages of ABG or alloplastic based reconstructions, but displaying similar or even higher success rate. Indeed, recent tissue engineering strategies have demonstrated encouraging results for bone regeneration using natural or synthetic biomaterials, patient cells and synthetic bioactive substances. The objective of this review is to present the etiologies of OZF defect, the available reconstruction procedures as well as the current state of the research.

Heterogeneous DNA hydrogel loaded with Apt02 modified tetrahedral framework nucleic acid accelerated critical-size bone defect repair

Segmental bone defects, stemming from trauma, infection, and tumors, pose formidable clinical challenges. Traditional bone repair materials, such as autologous and allogeneic bone grafts, grapple with limitations including source scarcity and immune rejection risks. The advent of nucleic acid nanotechnology, particularly the use of DNA hydrogels in tissue engineering, presents a promising solution, attributed to their biocompatibility, biodegradability, and programmability. However, these hydrogels, typically hindered by high gelation temperatures (∼46 °C) and high construction costs, limit cell encapsulation and broader application. Our research introduces a novel polymer-modified DNA hydrogel, developed using nucleic acid nanotechnology, which gels at a more biocompatible temperature of 37 °C and is cost-effective. This hydrogel then incorporates tetrahedral Framework Nucleic Acid (tFNA) to enhance osteogenic mineralization. Furthermore, considering the modifiability of tFNA, we modified its chains with Aptamer02 (Apt02), an aptamer known to foster angiogenesis. This dual approach significantly accelerates osteogenic differentiation in bone marrow stromal cells (BMSCs) and angiogenesis in human umbilical vein endothelial cells (HUVECs), with cell sequencing confirming their targeting efficacy, respectively. In vivo experiments in rats with critical-size cranial bone defects demonstrate their effectiveness in enhancing new bone formation. This innovation not only offers a viable solution for repairing segmental bone defects but also opens avenues for future advancements in bone organoids construction, marking a significant advancement in tissue engineering and regenerative medicine.

Finite element analysis and clinical application of 3D-printed Ti alloy implant for the reconstruction of mandibular defects

BackgroundThe reconstruction of segmental defect of the mandible has always been a challenge. The customized reconstruction plate without a bone graft is also considered a transitional means of rehabilitation and reconstruction in some cases.MethodsThis study evaluated the biomechanical behaviors of customized plates with different structural designs comparing with commercial plates using the finite element method in reconstrution of the lateral mandible defect.ResultsSimulations revealed the stress state in the plate bodies, bone tissues and screws were associated with the width, height, thickness of the plates as well as the distribution of screws. In all of the groups, the system of 16 mm-high, 2.8 mm-thick customized reconstruction plate with 10 screws was considered to be the most ideal design because of the most harmonious biomechanical state. What’s more, the stress shielding effects were not obvious in this experiment. Based on the above findings, we conducted a clinical case analysis to verify the mechanical properties of customized reconstruction and obtained a satisfactory operation result.ConclusionsThe results show that by adjusting the contour parameters of the reconstruction plates, an ideal and reliable customized plate can be manufactured. And the customized 3D-printed Ti alloy implant will be a new way to achieve mandibular reconstruction in patients unable to perform autologous bone graft surgery.Trial registrationThe present trial has been registered with ChiCTR, the registration number is ChiCTR 2,000,038,973 on 11/10/2020.

Legal regulation of bone banks in the Russian Federation

Autologous bone grafts are considered the gold standard for bone grafting, but in cases where their use is limited or impossible, allogeneic bone tissues become the first alternative. To date, the legal status of the activity on manufacturing bone grafts from femoral heads after total hip replacement surgery has not been defined. This somewhat hampers the development of this technology in Russia. Specialized institutions typically use internal instructions developed and approved taking into account existing legal norms in various fields. The creation of uniform operating rules, standards, instructions, clinical guidelines for working with donor tissues, as well as relevant sufficient regulatory and legal support would promote the development of tissue transplantology, bioimplantology and tissue engineering. This, in turn, would open up wide opportunities for the development of new methods of treatment of diseases, injuries, traumas and their consequences.

Finite element analysis of a customized coronoid prosthesis for traumatic coronoid deficiency

BackgroundTraumatic coronoid deficiency with persistent elbow instability is a challenging condition. Autologous bone graft reconstruction is often associated with a range of additional clinical problems and the outcome is often unpredictable. The purpose of this study was to design a prosthetic device that can reconstruct coronoid deficiency of any height and to evaluate its mechanical properties using finite element analysis. Materials and MethodsA customized coronoid prosthesis was designed based on image registration, automatic measurement and computer-aided design. After pilot study and sample size calculation, image data collected from six patients who underwent bilateral complete upper extremity CT scans were reconstructed. The test was divided into three groups: coronoid intact, prosthesis and autograft. Regan-Morrey type II and autologous olecranon osteotomy models were established. The prosthesis and autogenous olecranon were assembled to the coronoid base. Stress was applied axially along the proximal humeral diaphysis and implant micromotion and contact mechanics of the humeroulnar joint were measured at 30°, 45°, 60° and 90° of joint flexion respectively. ResultsAt all flexion angles, the maximum stress on the coronoid articular surface was significantly reduced in the prosthesis and autograft groups, with the reduction being more significant in the latter (P < 0.001). With increasing flexion, the maximum stress at the coronoid articular surface increased significantly after autograft reconstruction (7.2 to 68 MPa, P < 0.001), whereas the humeroulnar joint obtained a similar contact mechanics pattern to that of the control group after prosthetic reconstruction. As the flexion angle increased, the relative micromotion of both the prosthesis and autograft increased significantly (0.5-1.6 vs 0.2-1.2, Pmeasure time < 0.001, Pgroups < 0.001). Contact pressure and center-of-force paths of the humeroulnar joint experience abrupt stress changes at approximately 60° of flexion. ConclusionThe contact stress pattern in the humeroulnar joint is similar in prosthesis and intact coronoid groups. Autograft reconstruction increases contact stresses at the articular surface and alters the joint center-of-force path. The “stress surge phenomenon” in the humeroulnar joint surface before and after 60° of flexion may be one of the mechanisms of traumatic elbow degeneration.

Biomaterials for bone defect repair: Types, mechanisms and effects.

Bone defects or bone discontinuities caused by trauma, infection, tumours and other diseases have led to an increasing demand for bone grafts and biomaterials. Autologous bone grafts, bone grafts with vascular tips, anastomosed vascular bone grafts and autologous bone marrow components are all commonly used in clinical practice, while oversized bone defects require the use of bone tissue engineering-related biomaterials to repair bone defects and promote bone regeneration. Currently, inorganic components such as polysaccharides and bioceramics, as well as a variety of bioactive proteins, metal ions and stem cells can be loaded into hydrogels or 3D printed scaffold materials to achieve better therapeutic results. In this review, we provide an overview of the types of materials, applications, potential mechanisms and current developments in the repair of bone defects.

TECHNICAL NOTE FOR THE NOVEL OSTEOPORE® WEDGE IN MEDIAL OPENING WEDGE HIGH TIBIAL OSTEOTOMY

Medial opening wedge high tibial osteotomy (MOWHTO) is the workhorse procedure for correcting varus malalignment of the knee. There have been recent developments in the synthetic options to fill the osteotomy gap. The current gold standard for filling this osteotomy gap is autologous bone graft which is associated with donor site morbidity. We would like to introduce and describe the process of utilizing the novel Osteopore® 3D printed, honeycomb structured, Polycaprolactone and β-Tricalcium Phosphate wedge for filling the gap in MOWHTO. In the advent of additive manufacturing and the quest for more biocompatible materials, the usage of the Osteopore® bone wedge in MOWHTO is a promising technique that may improve the biomechanical stability as well the healing of the osteotomy gap.

TRANSFECTION OF HMSCS WITH CHEMICALLY MODIFIED MRNA CODING FOR BMP-7 ENHANCES OSTEOGENESIS

Bone morphogenetic proteins (BMPs) have been widely investigated for treating non-healing fractures. They participate in bone reconstruction by inducing osteoblast differentiation, and osteoid matrix production.1 The human recombinant protein of BMP-7 was among the first growth factors approved for clinical use. Despite achieving comparable results to autologous bone grafting, severe side effects have been associated with its use.2 Furthermore, BMP-7 was removed from the market.3 These complications are related to the high doses used (1.5-40 miligrams per surgery)2 compared to the physiological concentration of BMP in fracture healing (in the nanogram to picogram per milliliter range).4 In this study, we use transcript therapy to deliver chemically modified mRNA (cmRNA) encoding BMP-7. Compared to direct use of proteins, transcript therapy allows the sustained synthesis of proteins with native conformation and true post-translational modifications using doses comparable to the physiological ones.5 Moreover, cmRNA technology overcomes the safety and affordability limitations of standard gene therapy i.e. pDNA.6 BMP-7 cmRNA was delivered using Lipofectamine™ MessengerMAX™ to human mesenchymal stromal cells (hMSCs). We assessed protein expression and osteogenic capacity of hMSCs in monolayer culture and in a house-made, collagen hydroxyapatite scaffold. Using fluorescently-labelled cmRNA we observed an even distribution after loading complexes into the scaffold and a complete release after 3 days. For both monolayer and 3D culture, BMP-7 production peaked at 24 hours post-transfection, however cells transfected in scaffolds showed a sustained expression. BMP-7 transfected hMSCs yielded significantly higher ALP activity and Alizarin red staining at later timepoints compared to the untransfected group. Interestingly, BMP-7 cmRNA treatment triggered expression of osteogenic genes like OSX, RUNX-2 and OPN, which was also reflected in immunostainings. This work highlights the relevance of cmRNA technology that may overcome the shortcomings of protein delivery while circumventing issues of traditional pDNA-based gene therapy for bone regeneration.Acknowledgement: This work has been performed as part of the cmRNAbone project and has received funding from the European Union's Horizon 2020 research and innovation programme under the Grant Agreement No 874790.

3D POROUS COMPOSITE SCAFFOLDS WITH HIGH CALCIUM PHOSPHATE CONTENT AND ADDITION OF INORGANIC IONS FOR BONE REGENERATION APPLICATIONS

Critical-sized bone defects remain challenging in the clinical setting. Autologous bone grafting remains preferred by clinicians. However, the use of autologous tissue is associated with donor-site morbidity and limited accessibility to the graft tissue. Advances in the development of synthetic bone substitutes focus on improving their osteoinductive properties. Whereas osteoinductivity has been demonstrated with ceramics, it is still a challenge in case of polymeric composites. One of the approaches to improve the regenerative properties of biomaterials, without changing their synthetic character, is the addition of inorganic ions with known osteogenic and angiogenic properties. We have previously reported that the use of a bioactive composite with high ceramic content composed of poly(ethyleneoxide terephthalate)/poly(butylene terephthalate) (1000PEOT70PBT30, PolyActive, PA) and 50% beta-tricalcium phosphate (β-TCP) with the addition of zinc in a form of a coating of the TCP particles can enhance the osteogenic differentiation of human mesenchymal stromal cells (hMSCs) (3). To further support the regenerative properties of these scaffolds, inorganic ions with known angiogenic properties, copper or cobalt, were added to the coating solution.β-TCP particles were immersed in a zinc and copper or zinc and cobalt solution with a concentration of 15 or 45 mM. 3D porous scaffolds composed of 1000PEOT70PBT30 and pure or coated β-TCP were additively manufactured by 3D fibre deposition. The osteogenic and angiogenic properties of the fabricated scaffolds were tested in vitro through culture with hMSCs and human umbilical vein endothelial cells, respectively. The materials were further evaluated through ectopic implantation in an in vivo mini-pig model. The early expression of relevant osteogenic gene markers (collagen-1, osteocalcin) of hMSCs was upregulated in the presence of lower concentration of inorganic ions. Further analysis will focus on the evaluation of ectopic bone formation and vascularisation of these scaffolds after implantation in a mini-pig ectopic intramuscular model.

MACI Sandwich Technique With Autologous Bone Graft

Background: Osteochondral lesions of the knee are difficult to manage. Such lesions can be effectively treated with the matrix-induced autologous chondrocyte implantation (MACI) “sandwich” technique using autologous chondrocytes on porcine collagen membrane in conjuction with autologous cancellous bone grafting (ABG). Few studies have examined this technique to restore the osteochondral unit. Indications: The MACI “Sandwich” procedure is indicated when osteochondral lesions are larger than 2 cm2 in size and deeper than 8 to 10 mm, with symptoms consistent with the location of the lesion. Technique Description: The chondral defect is radically debrided back to healthy bone and cartilage tissue. The base of the bony cavity is drilled to enhance the vascular supply and promote healing. Next, the bony cavity is prepared to slightly undermine the subchondral bone surface around the articular margins, with the depth of the cavity wider than the opening, similar to a dental amalgam. The autologous cancellous bone is subsequently morselized and impacted up to the level of the native subchondral bone plate. The first MACI membrane with the cells facing up is placed directly onto the bone graft site and compressed with a neural patty. The neural patty is removed, and the second MACI membrane is then placed with the cells facing down. The edges are then micro-sutured to ensure stability. Results: The “sandwich” technique has superior survival rates compared with autologous bone grafting alone, with patients reporting decreased pain, improved function, and high satisfaction scores over a mid-term to long-term follow-up. Discussion/Conclusion: The MACI “sandwich” technique is an effective surgical intervention to restore the osteochondral unit and preserve the patient's native knee joint. Patient Consent Disclosure Statement: The author(s) attests that consent has been obtained from any patient(s) appearing in this publication. If the individual may be identifiable, the author(s) has included a statement of release or other written form of approval from the patient(s) with this submission for publication.

A meta-analysis of alveolar bone grafting using bone substitutes in cleft lip and palate patients.

In individuals with cleft lip and palate (CLP), an alveolar bone graft (ABG) is carried out for alveolar cleft closure. Several sources for ABG include autologous bone, xenologous bone, and alloplastic substitutes. Autologous bone has been the preferred source for ABG. Alloplastic substitutes might serve as an alternative. This study aimed to compare the outcomes between autologous and alloplastic as sources for ABG. This study made use of eight web databases. Randomized control trials (RCTs) and non-RCTs were included. CLP patients with alveolar cleft with imaging studies, computed tomography (CT scan) and/or cone beam CT scan, and bone graft volume within 6-12 months postintervention were selected. Bone graft volume within 6-12 months postintervention was assessed. Three studies met the inclusion criteria. After 6-12 months of follow-up, there were no statistically significant differences in bone graft volume between autologous and alloplastic bone grafts (fixed-effect model estimate value = 0.21; confidence interval - 0.301-0.730; P = 0.414). The limitations include small research sample sizes, a high likelihood of bias among included studies, and different alloplastic materials from each included study. Autologous and alloplastic bone grafts showed similar effectiveness in alveolar bone grafting. Further clinical trial studies with bigger sample sizes and similar interventions are needed as evidence for future reviews.

Absorbable calcium and phosphorus bioactive membranes promote bone marrow mesenchymal stem cells osteogenic differentiation for bone regeneration.

Large segmental bone defects are commonly operated with autologous bone grafting, which has limited bone sources and poses additional surgical risks. In this study, we fabricated poly(lactide-co-glycolic acid) (PLGA)/β-tricalcium phosphate (β-TCP) composite membranes by electrostatic spinning and further promoted osteogenesis by regulating the release of β-TCP in the hope of replacing autologous bone grafts in the clinical practice. The addition of β-TCP improved the mechanical strength of PLGA by 2.55 times. Moreover, β-TCP could accelerate the degradation of PLGA and neutralize the negative effects of acidification of the microenvironment caused by PLGA degradation. In vitro experiments revealed that PLGA/TCP10 membranes are biocompatible and the released β-TCP can modulate the activity of osteoblasts by enhancing the calcium ions concentration in the damaged area and regulating the pH of the local microenvironment. Simultaneously, an increase in β-TCP can moderate the lactate content of the local microenvironment, synergistically enhancing osteogenesis by promoting the tube-forming effect of human umbilical vein endothelial cells. Therefore, it is potential to utilize PLGA/TCP bioactive membranes to modulate the microenvironment at the site of bone defects to promote bone regeneration.

Extra-articular blocking technique for acetabular bone defect reconstruction.

The acetabular bone defect reconstruction is of great challenge in total hip arthroplasty (THA). Although several solutions such as autologous bone grafting, trabecular metal augment, or compromising techniques such as the medial protrusion, high inclination angle, and elevated hip center have been raised, their efficacy and reliability have not been fully substantiated. Traditional reconstruction methods may lead to bone resorption, aggravation of bone defects, unequal length of lower limbs, unbalance of hip-spine relationship, increased costs, and so on. Our team proved a new technique named extra-articular blocking to resolve this problem. The extra-articular blocking technique was a simple, economic and effective acetabular reconstructive method to resolve the massive acetabular bone defect in congenital (especially for developmental dysplasia of the hip, DDH), inflammatory, and osteolytic pathologies. This article organized as surgical technique, aims to report the surgical principle, indication, and procedure of using extra-articular blocking technique. With this technique, we have successfully solved the difficult problem of acetabular bone defect reconstruction. We found after 3 months of the surgery, there were fluoroscopic healing and remodeling. And there were no bone loss or graft absorption until the last follow-up as evidenced by radiographic observation. The survival rate of the acetabular component was 100%, no radiolucent line, changes in inclination and anteversion of the shell, as well as migration of the rotation center were identified.

Advances in magnesium-containing bioceramics for bone repair.

Reconstruction of bone defects or fractures caused by ageing, trauma and tumour resection is still a great challenge in clinical treatment. Although autologous bone graft is considered as gold standard, the source of natural bone is limited. In recent years, regenerative therapy based on bioactive materials has been proposed for bone reconstruction. Specially, numerous studies have indicated that bioactive ceramics including silicate and phosphate bioceramics exhibit excellent osteoinductivity and osteoconductivity, further promote bone regeneration. In addition, magnesium (Mg) element, as an indispensable mineral element, plays a vital role in promoting bone mineralisation and formation. In this review, different types of Mg-containing bioceramics including Mg-containing calcium phosphate-based bioceramics (such as Mg-hydroxyapatite, Mg-biphasic calcium phosphate), Mg-containing calcium silicate-based bioceramics (such as Mg2SiO4, Ca2MgSi2O7 and Mg-doped bioglass), Mg-based biocements, Mg-containing metal/polymer-bioceramic composites were systematacially summarised. Additionally, the fabrication technologies and their materiobiological effects were deeply discussed. Clinical applications and perspectives of magnesium-containing bioceramics for bone repair are highlighted. Overall, Mg-containing bioceramics are regarded as regenerative therapy with their optimised performance. Furthermore, more in-depth two-way researches on their performance and structure are essential to satisfy their clinical needs.

Advances in implants and bone graft types for lumbar spinal fusion surgery.

The increasing prevalence of spinal disorders worldwide necessitates advanced treatments, particularly interbody fusion for severe cases that are unresponsive to non-surgical interventions. This procedure, especially 360° lumbar interbody fusion, employs an interbody cage, pedicle screw-and-rod instrumentation, and autologous bone graft (ABG) to enhance spinal stability and promote fusion. Despite significant advancements, a persistent 10% incidence of non-union continues to result in compromised patient outcomes and escalated healthcare costs. Innovations in lumbar stabilisation seek to mimic the properties of natural bone, with evolving implant materials like titanium (Ti) and polyetheretherketone (PEEK) and their composites offering new prospects. Additionally, biomimetic cages featuring precisely engineered porosities and interconnectivity have gained traction, as they enhance osteogenic differentiation, support osteogenesis, and alleviate stress-shielding. However, the limitations of ABG, such as harvesting morbidities and limited fusion capacity, have spurred the exploration of sophisticated solutions involving advanced bone graft substitutes. Currently, demineralised bone matrix and ceramics are in clinical use, forming the basis for future investigations into novel bone graft substitutes. Bioglass, a promising newcomer, is under investigation despite its observed rapid absorption and the potential for foreign body reactions in preclinical studies. Its clinical applicability remains under scrutiny, with ongoing research addressing challenges related to burst release and appropriate dosing. Conversely, the well-documented favourable osteogenic potential of growth factors remains encouraging, with current efforts focused on modulating their release dynamics to minimise complications. In this evidence-based narrative review, we provide a comprehensive overview of the evolving landscape of non-degradable spinal implants and bone graft substitutes, emphasising their applications in lumbar spinal fusion surgery. We highlight the necessity for continued research to improve clinical outcomes and enhance patient well-being.

Analysis of risk factors for the recurrence of osteomyelitis of the limb after treatment with antibiotic-loaded calcium sulfate and autologous bone graft.

We aimed to evaluate the efficacy of antibiotic-loaded calcium sulfate combined with autologous iliac bone transplantation in the treatment of limb-localized osteomyelitis (Cierny-Mader type III) and analyze the causes and risk factors associated with infection recurrence. Clinical data of 163 patients with localized osteomyelitis of the extremities treated with antibiotic-loaded calcium sulfate combined with autologous iliac bone transplantation in Xi'an Honghui Hospital from January 2017 to December 2022 were retrospectively analyzed. All patients were diagnosed with localized osteomyelitis through clinical examination and treated with antibiotic-loaded calcium sulfate combined with autologous iliac bone. Based on the infection recurrence status, the patients were divided into the recurrence group and the non-recurrence group. The clinical data of the two groups were compared using univariate analysis. Subsequently, the distinct datasets were included in the binary logistic regression analysis to determine the risk and protective factors. This study included 163 eligible patients, with an average age of 51.0 years (standard deviation: 14.9). After 12 months of follow-up, 25 patients (15.3%) experienced infection recurrence and were included in the recurrence group; the remaining 138 patients were included in the non-recurrence group. Among the 25 patients with recurrent infection, 20 required reoperation, four received antibiotic treatment alone, and one refused further treatment. Univariate analysis showed that education level, smoking, hypoproteinemia, open injury-related infection, and combined flap surgery were associated with infection recurrence (p < 0.05). Logistic regression analysis showed that open injury-related infection (odds ratio [OR] = 35.698; 95% confidence interval [CI]: 5.997-212.495; p < 0.001) and combined flap surgery (OR = 41.408; 95% CI: 5.806-295.343; p < 0.001) were independent risk factors for infection recurrence. Meanwhile, high education level (OR = 0.009; 95% CI: 0.001-0.061; p < 0.001) was a protective factor for infection recurrence. Antibiotic-loaded calcium sulfate combined with autologous iliac bone transplantation is an effective method for treating limb-localized osteomyelitis. Patients without previous combined flap surgery and non-open injury-related infections have a relatively low probability of recurrence of infection after treatment with this surgical method. Additionally, patients with a history of smoking and hypoproteinemia should pay attention to preventing the recurrence of infection after operation. Providing additional guidance and support, particularly in patients with lower education levels and compliance, could contribute to the reduction of infection recurrence.

Is Anterior Cervical Discectomy and Fusion Sufficient for Neglected Unstable Hangman's Fracture? A Retrospective Case Series of Five Patients.

This study investigates the outcomes of treating neglected unstable Hangman's fractures through a single-stage Anterior Cervical Discectomy and Fusion (ACDF) procedure with tricortical iliac crest bone grafts. Five patients with neglected unstable Hangman's fractures, treated at our institution between March 2012 and March 2017, underwent C2-C3 ACDF. Functional outcomes were assessed using the Visual Analog Scale (VAS) score and Neck Disability Index (NDI), and neurological evaluation was done using the American Spinal Injury Association (ASIA) grading system. The radiological assessment included serial plain radiographs and a computed tomography scan at a 12-month follow-up. Postoperatively, C2-C3 angulation improved significantly, decreasing from 15° to 4.4°, and sagittal translation improved from 4.2 mm to 2 mm. The VAS score improved from 6.4 to 1.4 at 24 months postsurgery. Concurrently, NDI decreased from 70.4% to 14.8%. Fusion occurred in an average of 5.6 months. Neurologically, one patient improved from ASIA grade D to grade E, while the other four retained their grade E status. A single-stage ACDF with autologous iliac crest bone grafts is an effective surgical option for neglected type II/IIA Hangman's fractures, yielding satisfactory functional and radiological outcomes. This technique significantly corrects anterior translation and angulation, even in neglected cases, with the aid of intraoperative skull traction and plate reduction.