Tenacity Of Attachment Research Articles

Temperature affects susceptibility of intertidal limpets to bird predation.

High temperatures resulting in physiological stress and the reduced ability to resist predation can have life-or-death consequences for an organism. We investigated the effects of temperature on the susceptibility to predation for an ectothermic intertidal mollusc (the owl limpet, Lottia gigantea) and its predator (the black oystercatcher, Haematopus bachmani). The ability of L. gigantea to resist bird predation during low tide is determined by the tenacity of attachment to the rock. We developed a transducer to measure the force of predatory attacks on limpets by a captive black oystercatcher, and tested the hypothesis that exposure to warm temperatures during low tide emersion would affect the limpet's ability to resist dislodgement in trials with a morphometrically accurate beak mimic and a live bird. In beak mimic trials, four times as many limpets exposed to warm low tides were removed, as compared with limpets exposed to cool low tides or in 'no low tide' submerged conditions. Minimum time before limpet removal in captive bird trials was more than six times longer for limpets in cool low tide or no low tide treatments compared with limpets in the warm low tide treatment. We measured shear forces up to 36.63 N during predatory strikes. These direct measurements of the forces exerted by a living oystercatcher provide context for interactions with multiple prey species. Our data suggest that naturally occurring variation in body temperatures among individual prey items in the field could be an important driver of predator-prey interactions and subsequently community patterns.

Macroalgal assemblage type affects predation pressure on sea urchins by altering adhesion strength

In the Mediterranean, sea breams are the most effective Paracentrotus lividus and Arbacia lixula predators. Generally, seabreams dislodge adult urchins from the rocky substrate, turn them upside down and crush their tests. Sea urchins may respond to fish attacks clinging tenaciously to the substratum. This study is the first attempt to investigate sea urchin adhesion strength in two alternative algal assemblages of the rocky infralittoral and valuated its possible implication for fish predation. We hypothesized that (1) sea urchin adhesion strength is higher in rocky shores dominated by encrusting macroalgae (ECA) than in erected macroalgae (EMA); (2) predation rates upon sea urchins are lower in ECA than in EMA; and (3) predation rate on A. lixula is lower than that on P. lividus. We observed that attachment tenacity of both sea urchins was higher in ECA than EMA and that A. lixula exhibited a stronger attachment tenacity than P. lividus in ECA. Results supported the importance of adhesion strength, as efficient defence against sea bream attacks, only for, P. lividus. A. lixula adhesion strength does not seem to be an important factor in avoiding fish predation, possibly because of the low palatability of the species. These patterns may deserve particular interest in understanding the processes responsible for the maintenance of sea urchin barrens that are dominated by ECA assemblage.

Towards a nanomechanical basis for temporary adhesion in barnacle cyprids ( Semibalanus balanoides )

Cypris larvae of barnacles are able to use a rapidly reversible temporary adhesion mechanism for exploring immersed surfaces. Despite decades of research interest, the means by which cyprids maintain attachment with surfaces prior to permanent settlement remain poorly understood. Here, we present novel observations on the morphology of 'footprints' of a putative adhesive secretion deposited by cyprids during surface exploration. Atomic force microscopy (AFM) was used to image footprints at high resolution and to acquire measurements of interaction forces. R-CH3- and R-NH2-terminated glass surfaces were used for comparison of footprint morphology, and it was noted that on R-NH2 each footprint comprised three times the volume of material deposited for footprints on R-CH3. Direct scaling of adhesion forces derived from AFM measurements did not adequately predict the real attachment tenacity of cyprids, and it is suggested that a mixture of 'wet' and 'dry' adhesive mechanisms may be at work in cyprid adhesion. High-resolution images of cyprid footprints are presented that correlate well with the known morphology of the attachment structures.

Morpho-functional defences of Mediterranean sea urchins, Paracentrotus lividus and Arbacia lixula, against fish predators

Morpho-functional features potentially involved in defence mechanisms against fish predators (i.e. attachment tenacity, spine length, and test robustness and thickness) have been assessed in two Mediterranean sea urchins, Paracentrotus lividus and Arbacia lixula. All four morpho-functional features were significantly and positively related to individual size for both species of sea urchins. Test robustness (i.e. static load needed to break sea urchin tests) was significantly greater for A. lixula (from 3,450 to 15,000 g depending on size) than for P. lividus (1,180–11,180 g). Attachment tenacity (i.e. force needed to dislodge sea urchins from the rocky substrate) was greater in A. lixula (280–3,300 g) than in P. lividus (110–1,450 g), and the difference tended to decrease in relation to smaller sea urchin size. Spine length was greater in A. lixula (1.5–2.9 cm) than in P. lividus (0.5–2.3 cm), but the difference decreased for larger sea urchin size. Test thickness was slightly greater (but not significantly) in A. lixula (0.35–1.10 mm) than in P. lividus (0.12–0.90 mm). These results provide evidence that morpho-functional features of sea urchins could be involved in affecting predation rates by fishes upon P. lividus and A. lixula, with potential implications for the population structure and distribution patterns of the two sea urchins in shallow rocky reefs.

New method and equations for determining attachment tenacity and particle size limit in flotation

A new method and simple, yet accurate, equations for determining the tenacity of particle attachment and the particle size limit in flotation were developed by applying the force analysis of the gravity–capillarity coupling phenomena controlling the bubble–particle stability and detachment. Approximate solutions to the Young–Laplace equation were used to develop simple equations for the tenacity of attachment of particles with diameter up to 20 mm. Simple equations for the maximum size of floatable particles were derived as explicit functions of the particle contact angle, the surface tension, the particle density and the mean centrifugal acceleration of turbulent eddies. For the typical particle size and contact angle encountered in flotation, the analysis showed that the bubble size has little effect on the tenacity of particle attachment. The prediction for the largest size of floatable particles is compared with the experimental data and signifies influence of turbulence on the particle detachment.

The resistance to dislodgement ofSargassum muticumgermlings under defined hydrodynamic conditions

The attachment capabilities of a brown seaweed,Sargassum muticum(Yendo) Fensholt were investigated in the laboratory on both smooth and rough substrata and in surging water motion reaching flow velocities of 57 cm s and 90 cm s.Newly released zygotes have no means of adhesion until they develop rhizoids, which can adhere on contact with the substratum. Attachment tenacity, as measured by the germling's ability to withstand dislodgement at a given velocity of water flow, is slight at first, but increases with time. This is not simply a function of time spent in residence on the substratum, for germlings cultured suspension stick very quickly and tenaciously when allowed to settle. Tenacity of adhesion seems to be a reflexion of the amount of mucopolysaccharide adhesive present. This increases gradually during the first few days of the germling's life, regardless of whether it is attached or not.Once secure attachment is achieved it is not weakened even by the death of the germling. A film of bacteria and micro algae on the surface of the substratum is not a requirement for germling adhesion, but its presence enhances the tenacity of adhesion.Smooth substrata are the least favourable for germling survival in flowing water. On rough substrata the ‘peaks’ of the microtopography and surfaces facing into the current are much less favourable than the troughs between the ‘peaks’, or surfaces in the lee of ‘peaks’. Germling survival increases with increasing substratum roughness up to an optimum rugosity at which the mean depth of the depressions on the surface is 420 μm, and the vast majority are deeper than the height of the germlings.

Tenacity of attachment to a cult leader: a psychiatric perspective.

This follow-up study describes a cult whose leader became cruel and increasingly bizarre. Six of 14 members who were investigated at the time of the cult's formation remained loyal to the leader until the dissolution of the group almost four years later. The author describes the attitudes of these and other devotees who submitted to the irrational guru. The leader's radical teachings, his purported closeness to God, and his embodiment of a countercultural ideal of freedom appeared to be factors that bolstered his overwhelming authority in his followers' lives. The devotees used denial, rationalization, and other defensive operations to maintain the fantasy that the leader was acting for their benefit.