Att Sites Research Articles

Molecular Biology Techniques Q&A

Molecular Biology Techniques Q&A

The Superintegron Integrase and the Cassette Promoters Are Co-Regulated in Vibrio cholerae

Chromosome 2 of Vibrio cholerae carries a chromosomal superintegron, composed of an integrase, a cassette integration site (attI) and an array of mostly promoterless gene cassettes. We determined the precise location of the promoter, Pc, which drives the transcription of the first cassettes of the V. cholerae superintegron. We found that cassette mRNA starts 65 bp upstream of the attI site, so that the inversely oriented promoters Pc and Pint (integrase promoter) partly overlap, allowing for their potential co-regulation. Pint was previously shown to be induced during the SOS response and is further controlled by the catabolite repression cAMP-CRP complex. We found that cassette expression from Pc was also controlled by the cAMP-CRP complex, but is not part of the SOS regulon. Pint and Pc promoters were both found to be induced in rich medium, at high temperature, high salinity and at the end of exponential growth phase, although at very different levels and independently of sigma factor RpoS. All these results show that expression from the integrase and cassette promoters can take place at the same time, thus leading to coordinated excisions and integrations within the superintegron and potentially coupling cassette shuffling to immediate selective advantage.

Iterative marker excision system

The deletions of large genomic DNA fragments and consecutive gene knockouts are prerequisites for the generation of organisms with improved properties. One of the key issues in this context is the removal of antibiotic resistance markers from engineered organisms without leaving an active recombinase recognition site. Here, we report the establishment of an iterative marker excision system (IMES) that solves this problem. Based on the phiC31 integrase and its mutant att sites, IMES can be used for highly effective deletion of DNA fragments between inversely oriented B-CC and P-GG sites. The B-CC and P-GG sites are derived from attB and attP by substitution of the central core TT dinucleotide with CC and GG, respectively. An unnatural RR site that resides in the chromosome following deletion is the joining product of the right shoulders of B-CC and P-GG. We show that the RR sites do not recombine with each other as well as the RR site recombines with B-CC. The recombination efficiencies between RR and P-GG or RR and LL are only 0.1 % and 1 %, respectively. Thus, IMES can be used for multistep genomic engineering without risking unwanted DNA recombination. The fabrication of multi-purpose antibiotic cassettes and examples of the utilisation of IMES are described.

Genetic surgery in fungi: employing site-specific recombinases for genome manipulation

Site-specific recombination mediates the rearrangement of nucleic acids by the virtue of an recombinase acting on specific recognition sequences. Recombining activities belong either to the tyrosine- or serine-type group, based on the presence of specific residues in the catalytic centre, which can be further subdivided into families due to additional criteria. The most prominent systems are the λ phage integrase acting on att sites; the Cre recombinase from bacteriophage P1 with its loxP attachment sites; the FLP/FTR system of fungal origin, where it is required for 2-μm plasmid replication/amplification in yeast; and the prokaryotic β-recombinase that recombines six sites specifically in cis. Each of these has been exploited in fungal hosts of biotechnological, medical or general relevance, mainly for cloning projects, approaches of gene targeting, genome modification or screening purposes. With their precise and defined mode of action are site-specific recombination systems eminently suited for genetic tasks in fungi, like they are executed in functional studies at high throughput or modern approaches of synthetic biology.

DNA Secondary Structure Formation in Bacterial Gene Capture Systems at Single-Molecule Resolution

Bacteria with multiple antibiotic resistances are a threat to human health. These resistances spread faster than could be expected from mutations alone. It was shown that bacteria exhibit a mechanism of exchanging and collecting genetic sections - coding for antibiotic resistances or other adaptive traits - between individuals or even across species boundaries.This mechanism relies on genetic elements termed integrons. They allow the incorporation and expression of exogenous gene cassettes through a site-specific recombination process. The process involves an enzyme, integrase, which mediates recombination between a double stranded integron recombination site (attI site) and a single-stranded cassette recombination site (attC site). The attC site is supposably recognized by integrase through specificity to the secondary structure of the DNA hairpin formed by the single-stranded attC site (1).This poses the question of how the DNA hairpin forms inside the living cell. It was shown in vivo that negative superhelicity promotes integron recombination, most likely through cruciform extrusion from double-stranded DNA (2).Here, we use single-molecule FRET and magnetic tweezers to study the formation of the postulated DNA hairpin in the presence of various proteins. We present data on the competition between SSB and integrase and on the extrusion of E. coli attC sites from dsDNA and their interaction with integrase hinting at possible molecular mechanisms underlying the function of this system in bacteria.1. Mazel, D. 2006. Integrons: agents of bacterial evolution. Nat Rev Micro. 4: 608-620.2. Loot, C., D. Bikard, A. Rachlin, and D. Mazel. 2010. Cellular pathways controlling integron cassette site folding. EMBO J. 29: 3745-3745.

Screening of potential pseudo att sites of Streptomyces phage ΦC31 integrase in the human genome

ΦC31 integrase mediates site-specific recombination between two short sequences, attP and attB, in phage and bacterial genomes, which is a promising tool in gene regulation-based therapy since the zinc finger structure is probably the DNA recognizing domain that can further be engineered. The aim of this study was to screen potential pseudo att sites of ΦC31 integrase in the human genome, and evaluate the risks of its application in human gene therapy. TFBS (transcription factor binding sites) were found on the basis of reported pseudo att sites using multiple motif-finding tools, including AlignACE, BioProspector, Consensus, MEME, and Weeder. The human genome with the proposed motif was scanned to find the potential pseudo att sites of ΦC31 integrase. The possible recognition motif of ΦC31 integrase was identified, which was composed of two co-occurrence conserved elements that were reverse complement to each other flanking the core sequence TTG. In the human genome, a total of 27924 potential pseudo att sites of ΦC31 integrase were found, which were distributed in each human chromosome with high-risk specificity values in the chromosomes 16, 17, and 19. When the risks of the sites were evaluate more rigorously, 53 hits were discovered, and some of them were just the vital functional genes or regulatory regions, such as ACYP2, AKR1B1, DUSP4, etc. The results provide clues for more comprehensive evaluation of the risks of using ΦC31 integrase in human gene therapy and for drug discovery.

The site-specific integration reaction of Listeria phage A118 integrase, a serine recombinase

BackgroundA large subfamily of serine recombinases contains long polypeptide segments appended to the C-terminal end of the conserved catalytic domain. Members of this subfamily often function as phage integrases but also mediate transposition and regulate terminal differentiation processes in eubacteria. Although a few members of this subfamily have been studied in purified in vitro systems, key mechanistic aspects of reactions promoted by these recombinases remain to be determined, particularly with respect to the functions of the large C-terminal domain.ResultsWe have developed and characterized a robust in vitro recombination reaction by the Listeria phage A118 integrase, a member of the subfamily of serine recombinases containing a large C-terminal domain. The reaction occurs in a simple buffered salt solution and exhibits a modest stimulation by divalent cations or spermidine and DNA supercoiling. Recombination with purified A118 integrase is unidirectional, being efficient only between attP and attB DNA sites to either join separate DNA molecules (intermolecular recombination) or to generate deletions or inversions depending on the relative orientation of att sites in cis (intramolecular recombination). The minimal attP site is 50 bp but requires only 44 bp of base sequence information, whereas the minimal attB site is 42 bp and requires 38 bp of base sequence information. DNA exchange occurs between the central 2 bp of attP and attB. Identity between these two base pairs is required for recombination, and they solely determine the orientation of recombination sites. The integrase dimer binds efficiently to full att sites, including the attL and attR integration products, but poorly and differentially to each half-site. The large C-terminal domain can be separated from the N-terminal catalytic by partial proteolysis and mediates non-cooperative DNA binding to att sites.ConclusionsThe basic properties of the phage A118 integrase reaction and its substrate requirements have been elucidated. A118 integrase thus joins the handful of biochemically characterized serine integrases that are serving as models for mechanistic studies on this important class of recombinases. Information reported here will also be useful in exploiting this recombinase for genetic engineering.

Characterization of the Staphylococcus aureus rRNA Methyltransferase Encoded by orfX, the Gene Containing the Staphylococcal Chromosome Cassette mec (SCCmec) Insertion Site

The gene orfX is conserved among all staphylococci, and its complete sequence is maintained upon insertion of the staphylococcal chromosome cassette mec (SCCmec) genomic island, containing the gene encoding resistance to β-lactam antibiotics (mecA), into its C terminus. The function of OrfX has not been determined. We show that OrfX was constitutively produced during growth, that orfX could be inactivated without altering bacterial growth, and that insertion of SCCmec did not alter gene expression. We solved the crystal structure of OrfX at 1.7 Å and found that it belongs to the S-adenosyl-L-methionine (AdoMet)-dependent α/β-knot superfamily of SPOUT methyltransferases (MTases), with a high structural homology to YbeA, the gene product of the Escherichia coli 70 S ribosomal MTase RlmH. MTase activity was confirmed by demonstrating the OrfX-dependent methylation of the Staphylococcus aureus 70 S ribosome. When OrfX was crystallized in the presence of its AdoMet substrate, we found that each monomer of the homodimeric structure bound AdoMet in its active site. Solution studies using isothermal titration calorimetry confirmed that each monomer bound AdoMet but with different binding affinities (K(d) = 52 ± 0.4 and 606 ± 2 μm). In addition, the structure shows that the AdoMet-binding pocket, formed by a deep trefoil knot, contains a bound phosphate molecule, which is the likely nucleotide methylation site. This study represents the first characterization of a staphylococcal ribosomal MTase and provides the first crystal structure of a member of the α/β-knot superfamily of SPOUT MTases in the RlmH or COG1576 family with bound AdoMet.

TG1 integrase-based system for site-specific gene integration into bacterial genomes

Serine-type phage integrases catalyze unidirectional site-specific recombination between the attachment sites, attP and attB, in the phage and host bacterial genomes, respectively; these integrases and DNA target sites function efficiently when transferred into heterologous cells. We previously developed an in vivo site-specific genomic integration system based on actinophage TG1 integrase that introduces ∼2-kbp DNA into an att site inserted into a heterologous Escherichia coli genome. Here, we analyzed the TG1 integrase-mediated integrations of att site-containing ∼10-kbp DNA into the corresponding att site pre-inserted into various genomic locations; moreover, we developed a system that introduces ∼10-kbp DNA into the genome with an efficiency of ∼10(4) transformants/μg DNA. Integrations of attB-containing DNA into an attP-containing genome were more efficient than integrations of attP-containing DNA into an attB-containing genome, and integrations targeting attP inserted near the replication origin, oriC, and the E. coli "centromere" analogue, migS, were more efficient than those targeting attP within other regions of the genome. Because the genomic region proximal to the oriC and migS sites is located at the extreme poles of the cell during chromosomal segregation, the oriC-migS region may be more exposed to the cytosol than are other regions of the E. coli chromosome. Thus, accessibility of pre-inserted attP to attB-containing incoming DNA may be crucial for the integration efficiency by serine-type integrases in heterologous cells. These results may be beneficial to the development of serine-type integrases-based genomic integration systems for various bacterial species.

Integrons and gene cassettes: hotspots of diversity in bacterial genomes

Integrons are genetic units found in many bacterial species that are defined by their ability to capture small mobile elements called gene cassettes. Cassettes usually contain only one gene, potentially any gene, and an attC recombination site, and thousands of cassettes have been sequenced. A specialized IntI site-specific recombinase encoded by the integron recognizes attC and incorporates cassettes into an attI site located adjacent to the intI gene. Over 100 types of integrons have been found, most in bacterial chromosomes. They can all potentially share the same cassettes and, as recombination between attC in a cassette and an attI can occur repeatedly, an integron can contain from zero to hundreds of cassettes. Cassette arrays that are not located next to an intI gene, or solo cassettes at apparently random sites, are also seen. Hence, integrons contribute to generation of diversity in bacterial, plasmid, and transposon genomes and facilitate extensive sharing of information among bacteria.

A Highly Efficient Multifunctional Tandem Affinity Purification Approach Applicable to Diverse Organisms

Determining the localization, binding partners, and secondary modifications of individual proteins is crucial for understanding protein function. Several tags have been constructed for protein localization or purification under either native or denaturing conditions, but few tags permit all three simultaneously. Here, we describe a multifunctional tandem affinity purification (MAP) method that is both highly efficient and enables protein visualization. The MAP tag utilizes affinity tags inserted into an exposed surface loop of mVenus offering two advantages: (1) mVenus fluorescence can be used for protein localization or FACS-based selection of cell lines; and (2) spatial separation of the affinity tags from the protein results in high recovery and reduced variability between proteins. MAP purification was highly efficient in multiple organisms for all proteins tested. As a test case, MAP combined with liquid chromatography-tandem MS identified known and new candidate binding partners and modifications of the kinase Plk1. Thus the MAP tag is a new powerful tool for determining protein modification, localization, and interactions.

Control of Staphylococcus aureus pathogenicity island excision

Staphylococcus aureus pathogenicity islands (SaPIs) are a group of related 15-17 kb mobile genetic elements that commonly carry genes for superantigen toxins and other virulence factors. The key feature of their mobility is the induction of SaPI excision and replication by certain phages and their efficient encapsidation into specific small-headed phage-like infectious particles. Previous work demonstrated that chromosomal integration depends on the SaPI-encoded recombinase, Int. However, although involved in the process, Int alone was not sufficient to mediate efficient SaPI excision from chromosomal sites, and we expected that SaPI excision would involve an Xis function, which could be encoded by a helper phage or by the SaPI, itself. Here we report that the latter is the case. In vivo recombination assays with plasmids in Escherichia coli demonstrate that SaPI-coded Xis is absolutely required for recombination between the SaPI att(L) and att(R) sites, and that both sites, as well as their flanking SaPI sequences, are required for SaPI excision. Mutational analysis reveals that Xis is essential for efficient horizontal SaPI transfer to a recipient strain. Finally, we show that the master regulator of the SaPI life cycle, Stl, blocks expression of int and xis by binding to inverted repeats present in the promoter region, thus controlling SaPI excision.

Replicative resolution of integron cassette insertion

Site-specific recombination catalyzed by tyrosine recombinases follows a common pathway consisting of two consecutive strand exchanges. The first strand exchange generates a Holliday junction (HJ), which is resolved by a second strand exchange. In integrons, attC sites recombine as folded single-stranded substrates. Only one of the two attC site strands, the bottom one, is efficiently bound and cleaved by the integrase during the insertion of gene cassettes at the double-stranded attI site. Due to the asymmetry of this complex, a second strand exchange on the attC bottom strand (bs) would form linearized abortive recombination products. We had proposed that HJ resolution would rely on an uncharacterized mechanism, probably replication. Using an attC site carried on a plasmid with each strand specifically tagged, we followed the destiny of each strand after recombination. We demonstrated that only one strand, the one carrying the attC bs, is exchanged. Furthermore, we show that the recombination products contain the attC site bs and its entire de novo synthesized complementary strand. Therefore, we demonstrate the replicative resolution of single-strand recombination in integrons and rule out the involvement of a second strand exchange of any kind in the attC × attI reaction.

Group IIC Intron with an Unusual Target of Integration in Enterobacter cloacae

A potential role of group IIC-attC introns in integron gene cassette formation, that is, the way in which they could provide the attC sequence essential for recombination, has been proposed. Group IIC introns usually target the attC site of gene cassettes and more specifically their inverse core. Here we characterized a novel group IIC intron targeting the core site of the aadA1 gene cassette attC site (aadA1-qacEΔ1 gene cassette junction) from enterobacterial isolates. Intron mobility (retrohoming) was analyzed using a two-plasmid assay performed in Escherichia coli. Intron mobility assays confirmed the mobilization-integration of the group II intron into the core site of the aadA2, bla(VIM-2), bla(CARB-2), aac(6')-Ib, dfrXVb, arr2, cmlA4, and aadB gene cassettes but not into the attI site. This mobility was dependent on maturase activity. Reverse transcriptase PCR showed that this intron was transcriptionally active, and an intermediate circular form was detected by inverse PCR. This element was linked to the bla(VEB-1) extended-spectrum β-lactamase gene in a high number of enterobacterial isolates. A phylogenetic tree showed that the identified element was located in a branch separate from group IIC-attC introns, being an IIC intron possessing the ability to integrate using the core site of the attC sites as target.

Transcription of integron‐harboured gene cassette impacts integration efficiency in class 1 integron

Class 1 integrons play important roles in the dissemination of antibiotic resistance genes among bacteria. Generally, class 1 integron consists of an integrase gene (intI1), a recombination site (attI1) and a promoter (Pc) that drives the transcription of the downstreamed gene cassettes. Occasionally, there is a second promoter P2 downstream of the Pc promoter. Several Pc variants and Pc-P2 combinations have been defined and they display different transcription strengths, but the influence of the transcription of integron-harboured gene cassette on the integration efficiency has never been comprehensively studied. In this study, the integration frequencies of gene cassettes into the attI1 sites that downstream of four different Pc variants as well as their combinations with P2 promoter were measured. The results showed that there was an inverse correlation between the strength of Pc promoter and the integration efficiency and, with the same Pc promoter, the integration efficiency was significantly decreased when a P2 promoter preceded the attI1 site. Our findings indicate there is a relationship between the transcription of integron-harboured gene cassette and the integration of exogenous gene cassettes. The interrelationship between these two relatively independent processes may throw a light on our understanding the regulation system of class 1 integron.

Arm site independence of coliphage HK022 integrase in human cells

The integrase encoded by the lambdoid phage HK022 (Int-HK022) resembles its coliphage λ counterpart (Int-λ) in the roles of the cognate DNA arm binding sites and in controlling the direction of the reaction. We show here that within mammalian cells, Int-HK022 does not exhibit such a control. Rather, Int-HK022 recombined between all ten possible pairwise att site combinations, including attB×attB that was more effective than the conventional integrative attP×attB reaction. We further show that Int-HK022 depends on the accessory integration host factor (IHF) protein considerably less than Int-λ and exhibits stronger binding affinity to the att core. These differences explain why wild-type Int-HK022 is active in mammalian cells whereas Int-λ is active there only as an IHF-independent mutant.

Marine integrons containing novel integrase genes, attachment sites, attI, and associated gene cassettes in polluted sediments from Suez and Tokyo Bays.

In order to understand the structure and biological significance of integrons and associated gene cassettes in marine polluted sediments, metagenomic DNAs were extracted from sites at Suez and Tokyo Bays. PCR amplicons containing new integrase genes, intI, linked with novel gene cassettes, were recovered and had sizes from 1.8 to 2.5 kb. This approach uncovered, for the first time, the structure and diversity of both marine integron attachment site, attI, and the first gene cassette, the most efficiently expressed integron-associated gene cassette. The recovered 13 and 20 intI phylotypes, from Suez and Tokyo Bay samples, respectively, showed a highly divergence, suggesting a difference in integron composition between the sampling sites. Some intI phylotypes showed similarity with that from Geobacter metallireducens, belonging to Deltaproteobacteria, the dominant class in both sampling sites, as determined by 16S rRNA gene analysis. Thirty distinct families of putative attI site, as determined by the presence of an attI-like simple site, were recovered. A total of 146 and 68 gene cassettes represented Suez and Tokyo Bay unsaturated cassette pools, respectively. Gene cassettes, including a first cassette, from both sampling sites encoded two novel families of glyoxalase/bleomycin antibiotic-resistance protein. Gene cassettes from Suez Bay encoded proteins similar to haloacid dehalogenases, protein disulfide isomerases and death-on-curing and plasmid maintenance system killer proteins. First gene cassettes from Tokyo Bay encoded a xenobiotic-degrading protein, cardiolipin synthetase, esterase and WD40-like β propeller protein. Many of the first gene cassettes encoded proteins with no ascribable function but some of them were duplicated and possessed signal functional sites, suggesting efficient adaptive functions to their bacterial sources. Thus, each sampling site had a specific profile of integrons and cassette types consistent with the hypothesis that the environment shapes the genome.

Effect of attC structure on cassette excision by integron integrases

BackgroundIntegrons are genetic elements able to integrate and disseminate genes as cassettes by a site-specific recombination mechanism. These elements contain a gene coding for an integrase that carries out recombination by interacting with two different target sites; the attI site in cis with the integrase and the palindromic attC site of a gene cassette. Integron integrases (IntIs) bind specifically to the bottom strand of attC sites. The extrahelical bases resulting from folding of attC bottom strands are important for the recognition by integrases. These enzymes are directly involved in the accumulation and formation of new cassette arrangements in the variable region of integrons. Thus, it is important to better understand interactions between IntIs and their substrates.ResultsWe compared the ability of five IntIs to carry out excision of several cassettes flanked by different attC sites. The results showed that for most cassettes, IntI1 was the most active integrase. However, IntI2*179E and SonIntIA could easily excise cassettes containing the attCdfrA1 site located upstream, whereas IntI1 and IntI3 had only a weak excision activity for these cassettes. Analysis of the secondary structure adopted by the bottom strand of attCdfrA1 has shown that the identity of the extrahelical bases and the distance between them (A-N7-8-C) differ from those of attCs contained in the cassettes most easily excisable by IntI1 (T-N6-G). We used the attCdfrA1 site upstream of the sat2 gene cassette as a template and varied the identity and spacing between the extrahelical bases in order to determine how these modifications influence the ability of IntI1, IntI2*179E, IntI3 and SonIntIA to excise cassettes. Our results show that IntI1 is more efficient in cassette excision using T-N6-G or T-N6-C attCs while IntI3 recognizes only a limited range of attCs. IntI2*179E and SonIntIA are more tolerant of changes to the identity and spacing of extrahelical bases.ConclusionsThis study provides new insights into the factors that influence the efficiency of cassette excision by integron integrases. It also suggests that IntI2 and SonIntIA have an evolutionary path that is different from IntI1 and IntI3, in their ability to recognize and excise cassettes.

Site-specific recombination system based on actinophage TG1 integrase for gene integration into bacterial genomes

Phage integrases are enzymes that catalyze unidirectional site-specific recombination between the attachment sites of phage and host bacteria, attP and attB, respectively. We recently developed an in vivo intra-molecular site-specific recombination system based on actinophage TG1 serine-type integrase that efficiently acts between attP and attB on a single plasmid DNA in heterologous Escherichia coli cells. Here, we developed an in vivo inter-molecular site-specific recombination system that efficiently acted between the att site on exogenous non-replicative plasmid DNA and the corresponding att site on endogenous plasmid or genomic DNA in E. coli cells, and the recombination efficiencies increased by a factor of ~10(1-3) in cells expressing TG1 integrase over those without. Moreover, integration of attB-containing incoming plasmid DNA into attP-inserted E. coli genome was more efficient than that of the reverse substrate configuration. Together with our previous result that purified TG1 integrase functions efficiently without auxiliary host factors in vitro, these in vivo results indicate that TG1 integrase may be able to introduce attB-containing circular DNAs efficiently into attP-inserted genomes of many bacterial species in a site-specific and unidirectional manner. This system thus may be beneficial to genome engineering for a wide variety of bacterial species.

Cellular pathways controlling integron cassette site folding

By mobilizing small DNA units, integrons have a major function in the dissemination of antibiotic resistance among bacteria. The acquisition of gene cassettes occurs by recombination between the attI and attC sites catalysed by the IntI1 integron integrase. These recombination reactions use an unconventional mechanism involving a folded single-stranded attC site. We show that cellular bacterial processes delivering ssDNA, such as conjugation and replication, favour proper folding of the attC site. By developing a very sensitive in vivo assay, we also provide evidence that attC sites can recombine as cruciform structures by extrusion from double-stranded DNA. Moreover, we show an influence of DNA superhelicity on attC site extrusion in vitro and in vivo. We show that the proper folding of the attC site depends on both the propensity to form non-recombinogenic structures and the length of their variable terminal structures. These results draw the network of cell processes that regulate integron recombination.