Atom Transfer Radical Polymerization Research Articles

Quantitative Examination and Mechanistic Insights of Polymer Chain Conformation Confined in Nanopores by Time-Resolved Fluorescence Resonance Energy Transfer.

The conformational studies of polymers confined at the nanoscale remain challenging and controversial due to the limitations of characterization techniques. In this study, we utilized the high sensitivity of time-resolved fluorescence resonance energy transfer (trFRET) and a site-specific dye-labeling strategy to characterize the conformation of polymer chains confined in anodic aluminum oxide (AAO) nanopores. This strategy introduced a fluorescent donor (carbazole) and acceptor (anthracene) at the center of poly(butyl methacrylate) (PBMA) chains grown by atom transfer radical polymerization (ATRP). By quantitatively analyzing fluorescence decay through the Förster mechanism and the Drake-Klafter-Levitz (DKL) formalism, we can determine both the energy transfer efficiency and the spatial distribution of the dyes. This analysis revealed that the PBMA chains, with a molecular weight of 40 kDa, maintained their bulk-like conformation even when confined within nanopores as small as 10 nm in diameter. This study is the first to demonstrate the use of trFRET for investigating chain conformation in confined polymer systems, which can be generalized to other polymer types and polymer topologies in different confined geometries.

Uniform Polymer Microspheres by Photoinduced Metal-Free Atom Transfer Radical Precipitation Polymerization.

Herein, a photoinduced method is introduced for the synthesis of highly cross-linked and uniform polymer microspheres by atom transfer radical polymerization (ATRP) at room temperature and in the absence of stabilizers or surfactants. Uniform particles are obtained at monomer concentrations as high as 10% (by volume), with polymers being exempt from contamination by residual transition metal catalysts, thereby overcoming the two major longstanding problems associated with thermally initiated ATRP-mediated precipitation polymerization. Moreover, the obtained particles have also immobilized ATRP initiators on their surface, which directly enables the controlled growth of densely grafted polymer layers with adjustable thickness and a well-defined chemical composition. The method is then employed successfully for the synthesis of molecularly imprinted polymer microspheres.

A Multi-Enzyme Nanocascade to Target Disease-Relevant Metabolites.

Metabolic processes in living organisms depend on the synergistic actions of enzymes working in proximity and in concert, catalyzing reactions effectively while regulating the formation of metabolites. This enzyme synergy offers promising therapeutic application for diseases such as alcohol intoxication, cancer, and hyperinflammation. Despite their potential, the clinical translation of enzyme cascades is restricted by challenges including poor enzyme stability, short half-life, and a lack of delivery strategies that maintain enzyme proximity. In this study, multi-enzyme nanocascades synthesized are developed through in situ atom transfer radical polymerization using a zwitterionic monomer. This method markedly enhances enzyme stability and proximity, thereby prolonging their circulation half-life after systemic administration. It is demonstrated that the nanocascades of uricase and catalase effectively reduce uric acid levels without excessive hydrogen peroxide production, providing a potential antidote for hyperuricemia. Moreover, in a murine breast cancer model, the nanocascades of glucose oxidase and catalase inhibited tumor progression and enhanced the therapeutic efficacy of doxorubicin. The prolonged circulation and promoted reaction efficacy of these nanocascades underscore their substantial potential in enzyme replacement therapy and the treatment of various diseases.

Synthesis of Oil-Soluble Polymer-Grafted Carbon Dots with Outstanding Colloidal Stability and Tribological Properties in Polyalphaolefin.

Herein, a series of polylauryl methacrylate-grafted CDs (CDs-PLMA-m, m denotes the reaction time in hours) with core-shell structure were synthesized via surface-initiated atom-transfer radical polymerization (SI-ATRP). Due to the good solubility of PLMA in hydrocarbons, all of the CDs-PLMA-m can be facilely dispersed in polyalphaolefin (PAO) to form pellucid colloidal dispersions. The reciprocating ball-on-plate sliding friction tests proved that the addition of 3.0 wt % CDs-PLMA-1 markedly lessened the wear and friction of PAO by 53.0 and 40.0%, respectively. The tribological performances of the CDs-PLMA-1 (3.0 wt %)/PAO dispersion did not attenuate sharply when the friction duration extended from 20 to 200 min or the applied load increased from 20 to 100 N, revealing the long lifetime and desirable load-carrying effect of CDs-PLMA-1. Based on the friction tests, the antifriction behavior of CDs-PLMA-1 was related to the synergies between the molecular lubrication of PLMA-1 brushes and the nanolubrication of CDs. Furthermore, the wear analyses disclosed the deposition of tribofilm composed of a lot of CDs-PLMA-1 and a spot of iron oxides, which provided oxidation resistance and an antiwear function. This study established a reliable route to the synthesis of oil-soluble polymer-grafted CDs, enabling high-efficiency lubrication of CDs in PAO.

Separation and enrichment of Cd and Pb from food and water samples based on a graphene oxide-decorated poly 2-diethylaminoethyl methacrylate nanocomposite by dispersive micro-solid phase extraction (d-μ-SPE)

In this study, a graphene oxide combined with poly(2-diethylaminoethyl methacrylate) (GO@PDEAEMA) nanocomposite was synthesized for the separation and enrichment of Cd and Pb from food and water samples using the dispersive micro-solid phase extraction (d-μ-SPE) technique. The GO@PDEAEMA nanocomposite was synthesized using surface-initiated atom transfer radical polymerization (SI-ATRP) and characterized using various analytical techniques, such as FTIR, FE-SEM, TGA, BET, and XRD. The optimal experimental conditions were pH 8, 0.5 M HNO₃ as eluent, 5 mg of sorbent, and adsorption/desorption times of 0.5 and 1 min, respectively, with a recovery range of 89–101 %. The suggested method showed low limits of detection (LOD) and quantification (LOQ) of 0.11 μg L−1 and 0.37 μg L−1 for Cd and 0.28 μg L−1 and 0.93 μg L−1 for Pb, respectively. The optimal procedure was successfully applied to real water and food samples. The study demonstrates the possibility of using GO@PDEAEMA nanocomposite as an effective sorbent for toxic metal extraction.

Influence of Activation/Deactivation Process on Surface-initiated Atom Transfer Radical Polymerization: An in silico Investigation

We propose a simulation approach to explore surface-initiated atom transfer radical polymerization (SI-ATRP), in which how the chain growth is affected by activation/deactivation process could be considered explicitly. Our findings indicate that these activation and deactivation mechanisms provide all polymer chains with equal growth opportunities. This process leads to a significant increase of grafting density while concurrently reducing the dispersity of the grafted chains. The ratio of activated and dormant chains is theoretically proved to eventually reach equilibrated within the activation/deactivation process. The shorter lifetime of activation/deactivation cycle leads to an even equal opportunity and a faster “stop-continue” pace for the growth of all chains. Our study is helpful for better understanding the role of activation/deactivation process in SI-ATRP from a microscopic perspective.

Efficient Oxygen-Accelerated Near-Infrared Photoinduced Atom Transfer Radical Polymerization Mediated with S-Scheme Heterojunction Photocatalyst Composed of Lead-Free Halide Perovskite Encapsulated into Metal–Organic Framework

Efficient Oxygen-Accelerated Near-Infrared Photoinduced Atom Transfer Radical Polymerization Mediated with S-Scheme Heterojunction Photocatalyst Composed of Lead-Free Halide Perovskite Encapsulated into Metal–Organic Framework

Thermosensitive polymer/nanosilica hybrid as a multifunctional additive in water-based drilling fluid: Rheologicalproperties and lubrication performance as well as filtration loss reduction capacity

In previous studies, for obtaining a flat rheological drilling fluid, binary and ternary thermosensitive silica (SiO2) nanohybrids as rheological modifiers were synthesized using N-isopropylacrylamide with a thermal association temperatureof 32–33 °C as the thermosensitive monomer [J. Petrol. Sci. Eng. 219 (2022), 111096; Geoenergy Science and Engineering 228 (2023), 211934]. However, the as-synthesized SiO2 nanohybrids exhibited limited performance and low thermal transition temperature. Thus surface initiated atom transfer radical polymerization was utilized to graft hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) onto SiO2 surface to obtain PEGMA/SiO2 nanohybrids with an elevated thermal association temperature of 75 °C. The morphology and structure of the as-synthesized PEGMA/SiO2nanohybrid were characterized by infrared spectroscopy and transmission electron microscopy; and its effects as a thermosensitive multifunctional additive on the rheological properties and lubrication performance as well as filtration loss reduction capacity of a water-based drilling fluid were investigated. Results indicate that the drilling fluids with 1.0% PEGMA/SiO2 nanohybrids exhibited obvious thermal thickening behavior in the temperature range of 70–80 °C; at low temperatures, however, they had a significant viscosity reduction effect therein. At room temperature, the apparent viscosity and plastic viscosity were reduced by 68% and 50%, respectively. Besides, due to the tightly packed plugging layer formed by PEGMA/SiO2 nanohybrids and bentonite, the filtration loss of the drilling fluids containing 1.0% PEGMA/SiO2 nanohybrid was reduced by 37% as compared with that of the base slurry; and the lubrication coefficient was decreased by up to 50%. Moreover, the high-temperature aging process promoted the intermolecular interactions of the nanohybrids and their interaction with bentonite flakes, thereby further improving the rheological behavior, filtration reduction ability, and lubricity of the drilling fluids. The as-synthesized thermosensitive PEGMA/SiO2 nanohybrids with excellent multifunctionality could find promising application in water-based drilling fluids.

Synthesis and self-assembly of perylene-cored poly(amidoamine) dendrimers with poly[2-(dimethylamino)ethyl methacrylate]-modified arms as fluorescent bio-imaging probes and doxorubicin carriers

A poly(amidoamine) (PAMAM) dendrimer is prepared using a divergent method, with perylene-3,4,9,10-tetracarboxylic diimide (PTCDI) as luminescent core. The peripheral amines are modified using α-bromoisobutyryl bromide, allowing the dendrimers to act as macroinitiators for the synthesis of poly[2-(dimethylamino)ethyl methacrylate] (PDMAEMA) through atom transfer radical polymerization (ATRP) with three different degrees of polymerization. The successful synthesis is verified by conducting a range of analyses, including Fourier-transform infrared (FT-IR) spectroscopy, proton nuclear magnetic resonance (1H NMR) spectroscopy, and X-ray diffraction (XRD). Additionally, the impact of changes in solution pH on the self-assembly of dendrimers is explored. Field emission scanning electron microscopy (FE-SEM) and dynamic light scattering (DLS) showed unique morphologies, including spherical micelles and cubic-hexagonal structures, at varying pH levels. The self-assembled dendrimers are utilized to load doxorubicin (DOX) and the drug release kinetics are studied under various conditions. The biocompatibility of the dendrimers is assessed using the MTT assay against SH-SY5Y cells. Additionally, higher dendrimer generations improved the solubility, compatibility, and fluorescent properties of the core. The dendrimers' capacity for cellular uptake and fluorescence imaging is also evaluated using SH-SY5Y cells, demonstrating their effectiveness in live-cell fluorescence imaging.

Versatile Light‐Mediated Synthesis of Degradable Bottlebrush Polymers Using α‐Lipoic Acid

AbstractBottlebrush polymers have a variety of useful properties including a high entanglement molecular weight, low Young's modulus, and rapid kinetics for self‐assembly. However, the translation of bottlebrushes to real‐world applications is limited by complex, multi‐step synthetic pathways and polymerization reactions that rely on air‐sensitive catalysts. Additionally, most bottlebrushes are non‐degradable. Herein, we report an inexpensive, versatile, and simple approach to synthesize degradable bottlebrush polymers under mild reaction conditions. Our approach relies on the “grafting‐through” polymerization of α‐lipoic acid (LA)‐functionalized macromonomers. These macromonomers can be polymerized under mild, catalyst‐free conditions, and due to reversibility of the disulfide bond in LA, the resulting bottlebrush polymers can be depolymerized by cleaving disulfide backbone bonds. Bottlebrushes with various side‐chain chemistries can be prepared through the atom transfer radical polymerization (ATRP) of LA‐functionalized macromonomers, and the backbone length is governed by the macromonomer molecular weight and solvent polarity. We also demonstrate that LA‐functionalized macromonomers can be copolymerized with acrylates to form degradable bottlebrush networks. This work demonstrates the preparation of degradable bottlebrush polymers with a variety of side‐chain chemistries and provides insight into the light‐mediated grafting‐through polymerization of dithiolane‐functionalized macromonomers.

Shape-Memory Property Acting as a Switch to Change the Surface Property of the Film

Shape-memory polyester films having functional groups were prepared and further grafted onto poly(N-isopropylacrylamide) (PNIPAAm) via atom-transfer radical polymerization. The grafting point of PNIPAAm was controlled by changing the composition of good and poor solvents. In the case of graft polymerization using only good solvents, the film swells, and polymerization proceeds not only from the surface but also from the internal polymerization initiation points. By increasing the proportion of poor solvents, PNIPAAm was grafted onto the surface of the film without swelling. The samples grafted to the interior regions of the film exhibited a decrease in the shape-memory recovery rate and recovery speed, whereas the samples grafted only to the surface of the film exhibited high shape-memory properties. Furthermore, contact-angle measurements revealed that the surface-grafted polymer exhibited changes in surface properties in response to film deformation. Because the deformation of the film is a large change, on the order of several millimeters, the deformation of the manually stretched film was shown to control molecular-level changes on the surface.

Riboflavin‐Catalyzed Photoinduced Atom Transfer Radical Polymerization

AbstractThe photoATRP of methyl acrylate (MA) is investigated using riboflavin (RF) and CuBr2/Me6TREN as a dual catalyst system under green LED irradiation (λ ≈ 525 nm). Both RF and CuBr2/Me6TREN enhanced oxygen tolerance, enabling effective ATRP in the presence of residual oxygen. High molar mass polymers (up to Mn ≈ 129 000 g·mol−1) with low dispersity (Đ ≤ 1.16) are prepared, and chain‐end fidelity is confirmed through successful chain extension. The molecular masses of the obtained polymer increased linearly with conversion and showed high initiation efficiency. Mechanistic studies by laser flash photolysis reveal that the predominant activator generation mechanism is reductive quenching of RF by Me6TREN (83%, under [CuBr2]/[Me6TREN] = 1/3 condition), supported by polymerization kinetics and thermodynamic calculations.

Supraparticles from Cubic Iron Oxide Nanoparticles: Synthesis, Polymer Encapsulation, Functionalization, and Magnetic Properties.

Supraparticles (SPs) consisting of superparamagnetic iron oxide nanoparticles (SPIONs) are of great interest for biomedical applications and magnetic separation. To enable their functionalization with biomolecules and to improve their stability in aqueous dispersion, polymer shells are grown on the SPs' surface. Robust polymer encapsulation and functionalization is achieved via atom transfer radical polymerization (ATRP), improving the reaction control compared to free radical polymerizations. This study presents the emulsion-based assembly of differently sized cubic SPIONs (12-30 nm) into SPs with diameters ranging from ∼200 to ∼400 nm using dodecyltrimethylammonium bromide (DTAB) as the surfactant. The successful formation of well-defined spherical SPs depends upon the method used for mixing the SPION dispersion with the surfactant solution and requires the precise adjustment of the surfactant concentration. After purification, the SPs are encapsulated by growing surface-grafted polystyrene shells via activators generated by electron transfer (AGET) ATRP. The polymer shell can be decorated with functional groups (azide and carboxylate) using monomer blends for the polymerization reaction. When the amount of the monomer is varied, the shell thickness as well as the interparticle distances between the encapsulated SPIONs can be tuned with nanometer-scale precision. Small-angle X-ray scattering (SAXS) reveals that cubic SPIONs form less ordered assemblies within the SPs than spherical SPIONs. As shown by vibrating sample magnetometer measurements, the encapsulated SPs feature the same superparamagnetic behavior as their SPION building blocks. The saturation magnetization ranges between 10 and 30 emu/g and depends upon the nanocubes' size and phase composition.

Artificial Zymogen Based on Protein-Polymer Hybrids.

This study explores the synthesis and application of artificial zymogens using protein-polymer hybrids to mimic the controlled enzyme activation observed in natural zymogens. Pro-trypsin (pro-TR) and pro-chymotrypsin (pro-CT) hybrids were engineered by modifying the surfaces of trypsin (TR) and chymotrypsin (CT) with cleavable peptide inhibitors utilizing surface-initiated atom transfer radical polymerization. These hybrids exhibited 70 and 90% reductions in catalytic efficiency for pro-TR and pro-CT, respectively, due to the inhibitory effect of the grafted peptide inhibitors. The activation of pro-TR by CT and pro-CT by TR resulted in 1.5- and 2.5-fold increases in enzymatic activity, respectively. Furthermore, the activated hybrids triggered an enzyme activation cascade, enabling amplification of activity through a dual pro-protease hybrid system. This study highlights the potential of artificial zymogens for therapeutic interventions and biodetection platforms by harnessing enzyme activation cascades for precise control of catalytic activity.

Metal‐Free, Light‐Catalyzed ATRP For the Synthesis of Functional PVDF‐Based Block Copolymers and Their Characterization

AbstractThe synthesis and characterization of poly(vinylidene fluoride) (PVDF)‐based block copolymers using a metal‐free light‐catalyzed atom transfer radical polymerization (ATRP) approach are described. A PVDF macroinitiator with C─Br bonds at both ends of the chain is synthesized, and an organic photoredox catalyst (OPRC) is used to control the process. The metal‐free process expands the possibilities for the synthesis and application of PVDF‐based block copolymers, as it allows the use of monomers that is previously incompatible with classical ATRP due to their interaction with metal catalysts. The synthesized block copolymers are characterized structurally and thermally as powder materials and in thin films. Fourier‐transform infrared spectroscopy (FT‐IR) analysis revealed that the crystalline phase of PVDF changes when thin films are formed. Specifically, the disappearance of the FT‐IR peaks related to the gamma phase and the presence of characteristic peaks related to the alpha and beta phases indicate that film formation rearranged the PVDF chains, leading to changes in their crystalline phases. These PVDF‐based block copolymers have unique properties, including high thermal stability, chemical resistance, and piezoelectricity, making them potential candidates for use in various fields, such as biomedical engineering, energy storage, and electronic devices.

Synergistic Radical Taming by Concurrent Degenerative Transfer and Atom Transfer Radical Polymerization in Emulsion

Synergistic Radical Taming by Concurrent Degenerative Transfer and Atom Transfer Radical Polymerization in Emulsion

ATRP with ppb Concentrations of Photocatalysts.

In atom transfer radical polymerization (ATRP), dormant alkyl halides are intermittently activated to form growing radicals in the presence of a CuI/L/X-CuII/L (activator/deactivator) catalytic system. Recently developed very active copper complexes could decrease the catalyst concentration to ppm level. However, unavoidable radical termination results in irreversible oxidation of the activator to the deactivator species, leading to limited monomer conversions. Therefore, successful ATRP at a low catalyst loading requires continuous regeneration of the activators. Such a regenerative ATRP can be performed with various reducing agents under milder reaction conditions and with catalyst concentrations diminished in comparison to conventional ATRP. Photoinduced ATRP (PhotoATRP) is one of the most efficient methods of activator regeneration. It initially employed UV irradiation to reduce the air-stable excited X-CuII/L deactivators to the activators in the presence of sacrificial electron donors. Photocatalysts (PCs) can be excited after absorbing light at longer wavelengths and, due to their favorable redox potentials, can reduce X-CuII/L to CuI/L. Herein, we present the application of three commercially available xanthene dyes as ATRP PCs: rose bengal (RB), rhodamine B (RD), and rhodamine 6G (RD-6G). Even at very low Cu catalyst concentrations (50 ppm), they successfully controlled PhotoATRP. Well-defined polymers with preserved livingness were prepared under green LED irradiation, with subppm concentrations ([PC] ≥ 10 ppb) of RB and RD-6G or 5 ppm of RD. Interestingly, these PCs efficiently controlled ATRP at wavelengths longer than their absorption maxima but required higher loadings. Polymerizations proceeded with high initiation efficiencies, yielding polymers with narrow molecular weight distributions and high chain-end fidelity. UV-vis, fluorescence, and laser flash photolysis studies helped to elucidate the mechanism of the processes involved in the dual-catalytic systems, comprising parts per million of Cu complexes and parts per billion of PCs.

Synthesis of Reduction-Sensitive Brush-Arm Star Polymers via Combined Ring-Opening Metathesis Polymerization–Atom Transfer Radical Polymerization and Controlled-Release Properties

Synthesis of Reduction-Sensitive Brush-Arm Star Polymers via Combined Ring-Opening Metathesis Polymerization–Atom Transfer Radical Polymerization and Controlled-Release Properties

Orthogonal Atom Transfer Radical Polymerization and Reversible Addition–Fragmentation Chain Transfer Polymerization for Controlled Polymer Architectures

Orthogonal Atom Transfer Radical Polymerization and Reversible Addition–Fragmentation Chain Transfer Polymerization for Controlled Polymer Architectures

Behind the scenes of green chemistry: Glories and shadows of atom transfer radical polymerization environmental impact (E-factor)

The paper presents the evaluation of environmental impact (E-factor) as green chemistry metric, calculated for polymer synthesis via one of the most useful tools of macromolecular chemistry, which is atom transfer radical polymerization (ATRP), belonging to the reversible deactivation radical polymerization (RDRP) techniques. For the first time, experimentally determined polymerization yields were included in the calculation, by analyzing the polymer synthesis process using various organic solvents, different methods of regenerating the catalytic complex (meaning ATRP approach), or using the miniemulsion system as eco-friendly reaction medium and presenting the possibility of effective solvent recovery and reuse. The majority of the values of E-factor were below 16, falling within the scope intended for fine chemicals (5–50). The significant and innovative part of the presented research involves verifying the feasibility of using higher concentrations of the dispersed phase in the case of miniemulsion polymerization (increased to as much as 100 % vs. aqueous phase from a typical 20 %), while the use of recycled water allowed a 3-fold reduction in E-factor value. Polymerization in a miniemulsion environment is also attractive due to its low cost, considering the price of distilled water, which is over 580-fold lower than that of DMSO – a typical organic solvent. These observations allow for the reduction of environmental impact and process cost. Importantly, the observed trends in E-factor changes allowed for the identification of ATRP development directions in line with green chemistry and the circular economy.