Atom Transfer Radical Polymerization Initiator Research Articles

Uniform Polymer Microspheres by Photoinduced Metal-Free Atom Transfer Radical Precipitation Polymerization.

Herein, a photoinduced method is introduced for the synthesis of highly cross-linked and uniform polymer microspheres by atom transfer radical polymerization (ATRP) at room temperature and in the absence of stabilizers or surfactants. Uniform particles are obtained at monomer concentrations as high as 10% (by volume), with polymers being exempt from contamination by residual transition metal catalysts, thereby overcoming the two major longstanding problems associated with thermally initiated ATRP-mediated precipitation polymerization. Moreover, the obtained particles have also immobilized ATRP initiators on their surface, which directly enables the controlled growth of densely grafted polymer layers with adjustable thickness and a well-defined chemical composition. The method is then employed successfully for the synthesis of molecularly imprinted polymer microspheres.

Thermosensitive polymer/nanosilica hybrid as a multifunctional additive in water-based drilling fluid: Rheologicalproperties and lubrication performance as well as filtration loss reduction capacity

In previous studies, for obtaining a flat rheological drilling fluid, binary and ternary thermosensitive silica (SiO2) nanohybrids as rheological modifiers were synthesized using N-isopropylacrylamide with a thermal association temperatureof 32–33 °C as the thermosensitive monomer [J. Petrol. Sci. Eng. 219 (2022), 111096; Geoenergy Science and Engineering 228 (2023), 211934]. However, the as-synthesized SiO2 nanohybrids exhibited limited performance and low thermal transition temperature. Thus surface initiated atom transfer radical polymerization was utilized to graft hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) onto SiO2 surface to obtain PEGMA/SiO2 nanohybrids with an elevated thermal association temperature of 75 °C. The morphology and structure of the as-synthesized PEGMA/SiO2nanohybrid were characterized by infrared spectroscopy and transmission electron microscopy; and its effects as a thermosensitive multifunctional additive on the rheological properties and lubrication performance as well as filtration loss reduction capacity of a water-based drilling fluid were investigated. Results indicate that the drilling fluids with 1.0% PEGMA/SiO2 nanohybrids exhibited obvious thermal thickening behavior in the temperature range of 70–80 °C; at low temperatures, however, they had a significant viscosity reduction effect therein. At room temperature, the apparent viscosity and plastic viscosity were reduced by 68% and 50%, respectively. Besides, due to the tightly packed plugging layer formed by PEGMA/SiO2 nanohybrids and bentonite, the filtration loss of the drilling fluids containing 1.0% PEGMA/SiO2 nanohybrid was reduced by 37% as compared with that of the base slurry; and the lubrication coefficient was decreased by up to 50%. Moreover, the high-temperature aging process promoted the intermolecular interactions of the nanohybrids and their interaction with bentonite flakes, thereby further improving the rheological behavior, filtration reduction ability, and lubricity of the drilling fluids. The as-synthesized thermosensitive PEGMA/SiO2 nanohybrids with excellent multifunctionality could find promising application in water-based drilling fluids.

Individual cell modification with cell surface specific atom transfer radical polymerization for enhanced Cr(VI) removal

Modifying cells with polymers on the surface can enable them to gain or enhance function with various applications, wherein the atom transfer radical polymerization (ATRP) has garnered significant potential due to its biocompatibility. However, specifically initiating ATRP from the cell surface for in-situ modification remains challenging. This study established a bacterial surface-initiated ATRP method and further applied it for enhanced Cr(VI) removal. The cell surface specificity was facilely achieved by cell surface labelling with azide substrates, following alkynyl ATRP initiator specifically anchoring with azide-alkyne click chemistry. Then, the ATRP polymerization was initiated from the cell surface, and different polymers were successfully applied to in-situ modification. Further analysis revealed that the modification of Shewanella oneidensis with poly (4-vinyl pyridine) and sodium polymethacrylate improved the heavy metal tolerance and enhanced the Cr(VI) removal rate of 2.6 times from 0.088h-1 to 0.314h-1. This work provided a novel idea for bacterial surface modification and would extend the application of ATRP in bioremediation.

Durable and dense zwitterionic polymer brushes initiated from surface-segregated cyclic initiator via atom transfer radical polymerization

Immobilization of initiators on a polymer surface for surface-initiated polymerization has primarily been achieved via covalent bonds. However, this approach is subject to limitations, such as the requirement for additional processing steps and different customized methods tailored to the specific characteristics of each polymer. In this study, initiator immobilization was achieved by surface segregation, a phenomenon observed in polymer blends wherein one component spontaneously enriches the surface, thereby enabling the modification of surface properties. Specifically, we designed cyclic oligomers containing an atom transfer radical polymerization (ATRP) initiator. The enhanced performance of surface segregation mediated by the cyclic topology was evaluated, along with the surface-initiated polymerization initiated by the surface-segregated oligomer. The kinetics of the ATRP reaction for the cyclic initiators were investigated, and the zwitterion polymer brush density was also calculated. The robustness of the brushes was evaluated through leaching tests, which revealed no notable alterations before and after the assessments. The antifouling effect of the brushes was confirmed through protein adsorption, platelet adhesion, bacterial attachment, and whole-blood circulation experiments. These antifouling examinations demonstrated reduced substance attachment of zwitterionic polymer brushes. Lastly, experiments on optimizing the ATRP catalyst loading during the surface-initiated ATRP were conducted. The excellent performance of the cyclic initiators is expected to provide new insights and opportunities in the field of surface-initiated polymerization. Moreover, the formation of zwitterion brushes via cyclic initiators holds promise for versatile applications in the field of long-term utilization in biointerfaces, offering a wide range of potential uses.

From Facile One-Pot Synthesis of Semi-Degradable Amphiphilic Miktoarm Polymers to Unique Degradation Properties.

We report a one-pot synthesis of well-defined A5B and A8B miktoarm star-shaped polymers where N,N-dimethylaminoethyl methacrylate (DMAEMA) and various cyclic esters such as ε-caprolactone (ε-CL), lactide (LA) and glycolide (GA) were used for the synthesis. Miktopolymers were obtained by simultaneously carrying out atom transfer radical polymerization (ATRP) of DMAEMA, ring-opening polymerization (ROP) of cyclic esters, and click reaction between the azide group in gluconamide-based (GLBr5-Az) or lactonamide-based (GLBr8-Az) ATRP initiators and 4-pentyn-1-ol. The relatively low dispersity indices of the obtained miktoarm stars (Đ = 1.2-1.6) indicate that control over the polymerization processes was sustained despite almost complete monomers conversions (83-99%). The presence of salts from phosphate-buffered saline (PBS) in polymer solutions affects the phase transition, increasing cloud point temperatures (TCP) values. The critical aggregation concentration (CAC) values increased with a decreasing number of average molecular weights of the hydrophobic fraction. Hydrolytic degradation studies revealed that the highest reduction of molecular weight was observed for polymers with PCL and PLGCL arm. The influence of the composition on the miktopolymers hydrophilicity was investigated via water contact angle (WCA) measurement. Thermogravimetric analysis (TGA) disclosed that the number of arms and their composition in the miktopolymer affects its weight loss under the influence of temperature.

Synthesis and characterization of graft copolymer hydrogel by “grafting from” atom transfer radical polymerization using brominated macro monomeric initiator and investigation of hydrogel properties

In this study, poly(ɛ-caprolactone-g-2-hydroxy ethyl methacrylate) [P(CL-g-HEMA)] graft copolymer hydrogels were successfully synthesized through multi-step reactions. For this purpose, firstly, hydroxyl-terminated poly(ɛ-caprolactone) (PCL-OH) was obtained by ring-opening polymerization (ROP) method of ɛ-caprolactone using 3-chlor-1,2-propanediol initiator, which is suitable for ring-opening polymerization method. Then, from the reaction of synthesized PCL-OH and 3-bromopropionyl chloride, a new brominated poly(ɛ-caprolactone) (PCL-Br) was synthesized for use as a functionalized atom transfer radical polymerization (ATRP) initiator. Poly(ɛ-caprolactone-g-2-hydroxy ethyl methacrylate) [P(CL-g-HEMA)] graft copolymer hydrogels were synthesized by “grafting from” atom transfer radical polymerization (ATRP) of 2-hydroxy ethyl methacrylate (HEMA) presence the new synthesized functionalized ATRP initiator (PCL-Br) and hydrogel properties were investigated. The synthesized functionalized initiators and graft copolymer hydrogel were characterized by spectroscopic methods such as 1H-NMR, FT-IR, TGA, DSC and SEM. The observation of two different decomposition temperatures, respectively, from the TGA analysis results may support the formation of the biblock graft copolymer. A glass transition temperature (Tg) of the graft copolymer hydrogel was found by DSC, and this value is between the Tg values of the homopolymers forming the graft copolymer hydrogel. Water swelling values of graft copolymer hydrogels were measured and calculated every 24 h in pure water with pH = 7 at from + 4 to 65 °C. Considering the weight of dry graft copolymer hydrogels, it was seen that water was absorbed at most at + 4 °C. As the temperature increased, the water absorption or swelling of the hydrogel decreased.

On the way to increase osseointegration potential: Sequential SI-ATRP as promising tool for PEEK-based implant nano-engineering

In the search of the ideal bone implant material, surface initiated atom transfer radical polymerization (SI-ATRP) techniques were successfully employed to modify the polyetheretherketone (PEEK) surface with complex architecture nanolayers featuring hydrophilic poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) or poly(2-hydroxyethyl methacrylate) (PHEMA) branches. As a result, polymer layers with height up to over 300 nm were synthesized to decrease the water contact angle from 92.8° to 23.0°. In-depth analysis of layer topography, structure and elemental composition realized with atomic force microscopy (AFM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), time-of-flight secondary ions mass spectroscopy (TOF-SIMS) and X-ray photon spectroscopy (XPS) confirmed successful surface modification. Additionally, to demonstrate the applicability of proposed PEEK functionalization, the biomineralization assay in simulated body fluid (SBF) solution was conducted. The high density of hydroxyl and amine groups in branched polymer brushes structure enhanced the rate of hydroxyapatites (HAp) formation substantially. Compared to untreated PEEK, modification with polymer brushes resulted in the creation of cauliflower-like structures with high specific surface area and Ca/P ratio equal to 1.83–1.87 for PEEK grafted with brushes composed of PHEMA backbone segment and PDMAEMA or PHEMA as block polymer branches (PEEK-g-PHEMA-g-PDMAEMA or PEEK-g-PHEMA-g-PHEMA) after 2 weeks. Finally, the process of the hydroxyapatite formation and increase of the layer thickness in a range of 14 days to 6 weeks of immersion in SBF was thoroughly visualized by scanning electron microscopy (SEM).

Thermo-responsive poly(di(ethylene glycol) methyl ether methacrylate) brushes as substrate-independent release coatings for cell culture and selective cell separation and purification

Abstract A systematic study on the surface-initiated polymerization of di(ethylene glycol) methyl ether methacrylate (DEGMA) by atom transfer radical polymerization (ATRP) from glass, silicon, titanium as well as tissue culture polystyrene (TCPS) is reported in an attempt to expand the known thermoresponsive poly(di(ethylene glycol) methyl ether methacrylate) (PDEGMA) cell release layers on gold to other substrates. The use of these substrate materials requires an altered immobilization chemistry to couple a bromide containing ATRP initiator to the surfaces. Using aminosilanes or polydopamine as coupling layers for the attachment of α-bromoisobutyryl bromide (BiBB) and the direct functionalization of surface hydroxyl groups with trichlorosilane-functionalized ATRP initiators all surfaces studied were shown to facilitate the growth of PDEGMA brushes using the same conditions that were reported previously for polymerization on gold. The brush layers obtained were characterized systematically using wetting, ellipsometry, X-ray photoelectron spectroscopy (XPS) as well as atomic force microscopy (AFM) analyses. Selective cell release and separation of PaTu 8988t and NIH 3T3 cells, which are known to exhibit different behavior after temperature drop-induced brush swelling, was observed for all substrates, albeit for different brush thicknesses, implying variations in initiator and also PDEGMA grafting density. The successful modification of biomedically relevant materials (Ti and TCPS) implies that the previously reported stem cell purification and selective cell release of various cell types, which is facilitated by PDEGMA brushes, can be realized and consequently scaled up in the future.

Cyclic macromonomer from a multifunctional atom transfer radical polymerization initiator via sulfoxide-based vinyl protection

A novel synthetic approach to vinyl-functionalized cyclic macromolecules via sulfoxide chemistry.

Enzyme-Polymer Conjugates with Photocleavable Linkers for Control Over Protein Activity.

Reversible conjugation of polymers to proteins is important for a variety of applications, for example to control protein activity. Light is often employed as an external trigger to allow for spatio and temporal control over release of a payload. In this report, we demonstrate preparation of photocleavable poly(polyethylene glycol) acrylate)-lysozyme (pPEGA-Lys) conjugates via ortho-nitrobenzyl linkages. The conjugates were made by both grafting-to and grafting-from in order to compare and contrast the two synthetic approaches. First, a lysine-reactive ortho-nitrobenzyl atom transfer radical polymerization (ATRP) initiator was synthesized. For the grafting-to strategy, the initiator was employed in the ATRP of PEGA, and the subsequent polymer was conjugated to the lysine residues of lysozyme. For the grafting-from strategy, lysozyme was modified first with the photocleavable initiator, and the purified macroinitiator was then subjected to polymerization conditions to synthesize the protein-polymer conjugate. The polymer was cleaved from the protein via UV light, and activity before and after polymer removal was evaluated, showing 83% recovery. This work provides evidence that reversing conjugation is successful for activity modulation for ortho-nitrobenzyl linked protein-polymer conjugates.

Characterization of well‐defined PHEMA‐based bottlebrushes with controlled chain length and grafting density

AbstractBottlebrushes with controlled horizontal‐ and vertical‐axis scales, which have a high density of graft chains on their main chains, are useful as a nanomaterial. The properties of bottlebrushes depend on the polymer‐type, ‐chain length, and grafting density. We fabricate well‐defined bottlebrushes based on poly(2‐hydroxyethyl methacrylate) (PHEMA) using the grafting from method. Macroinitiators with different compositions of an atom transfer radical polymerization (ATRP) initiator group are prepared, and two bottlebrushes are consequently synthesized by ATRP of HEMA with the macroinitiator: a concentrated bottlebrush with graft chains on the repeating units and a semi‐dilute bottlebrush with graft chains on approximately 10%. The hydrodynamic and gyration radii of the concentrated‐ and semi‐dilute bottlebrushes are Rh = 9.2 nm (Rg = 24.9 nm) and Rh = 69.1 nm (Rg = 130 nm), respectively. The shape factors (Rg/Rh) of these bottlebrushes indicate both solid‐rods. The virial coefficient of semi‐dilute bottlebrush, calculated from static light scattering measurements, is higher than that of concentrated bottlebrush, owing to the flexibility and solvation structure. The grafting density play a more prominent role than the graft‐chain length in the excluded volume effect of the bottlebrush. These results provide useful insights for the construction of polymethacrylate‐based bottlebrushes with specific hydrodynamic properties.

Vitamin B12-catalyzed electro-polymerization for ultrasensitive RNA detection

Vitamin B12 being a natural catalyst in atom transfer radical polymerization (ATRP), has the advantages of mild reaction conditions, good biocompatibility and high catalytic efficiency. In this report, an electrochemical biosensor of the lung cancer biomarker microRNA-21 (miRNA-21) is designed for early screening of lung cancer with high sensitivity at the femtomolar level. In this approach, hairpin DNA with N3 end group was first attached to the electrode surface. When miRNA-21 was present and paired with hairpin DNA, the N3 group released and attached to the ATRP initiator through “click reaction”. Through eATRP, a large number of FerrocenylMethyl Methacrylate (FcMMA) monomers polymerized into long chains for signal amplification. These long chains had a distinct electrical signal in the square wave voltammetry (SWV), which can detect RNA with high sensitivity. The limit of detection (LOD) goes down to 1.010 fM after ATRP polymerization, which is lower than that of the majority of other ultra-sensitive RNA electrochemical assays. Results also show that the vitamin B12-based electrochemical biosensor is highly selective and suitable for RNA detection in complex biological samples.

Synthesis and Characterization of ABA-Type Triblock Copolymers Using Novel Bifunctional PS, PMMA, and PCL Macroinitiators Bearing p-xylene-bis(2-mercaptoethyloxy) Core.

Syntheses of novel bifunctional poly(methyl methacrylate) (PMMA)-, poly(styrene) (PS)-, and (poly ε-caprolactone) (PCL)-based atom transfer radical polymerization (ATRP) macroinitiators derived from p-xylene-bis(1-hydroxy-3-thia-propanoloxy) core were carried out to obtain ABA-type block copolymers. Firstly, a novel bifunctional ATRP initiator, 1,4-phenylenebis(methylene-thioethane-2,1-diyl)bis(2-bromo-2-methylpropanoat) (PXTBR), synthesized the reaction of p-xylene-bis(1-hydroxy-3-thia-propane) (PXTOH) with α-bromoisobutryl bromide. The PMMA and PS macroinitiators were prepared by ATRP of methyl methacrylate (MMA) and styrene (S) as monomers using (PXTBR) as the initiator and copper(I) bromide/N,N,N',N″,N″-pentamethyldiethylenetriamine (CuBr/PMDETA) as a catalyst system. Secondly, di(α-bromoester) end-functionalized PCL-based ATRP macronitiator (PXTPCLBr) was prepared by esterification of hydroxyl end groups of PCL-diol (PXTPCLOH) synthesized by Sn(Oct)2-catalyzed ring opening polymerization (ROP) of ε-CL in bulk using (PXTOH) as initiator. Finally, ABA-type block copolymers, PXT(PS-b-PMMA-b-PS), PXT(PMMA-b-PS-b-PMMA), PXT(PS-b-PCL-b-PS), and PXT(PMMA-b-PCL-b-PMMA), were synthesized by ATRP of MMA and S as monomers using PMMA-, PS-, and PCL-based macroinitiators in the presence of CuBr/PMDETA as the catalyst system in toluene or N,N-dimethylformamide (DMF) at different temperatures. In addition, the extraction abilities of PCL and PS were investigated under liquid-liquid phase conditions using heavy metal picrates (Ag+, Cd2+, Cu2+, Hg2+, Pb2+, and Zn2+) as substrates and measuring with UV-Vis the amounts of picrate in the 1,2-dichloroethane phase before and after treatment with the polymers. The extraction affinity of PXTPCL and PXTPS for Hg2+ was found to be highest in the liquid-liquid phase extraction experiments. Characterizations of the molecular structures for synthesized novel initiators, macroinitiators, and the block copolymers were made by spectroscopic (FT-IR, ESI-MS, 1H NMR, 13C NMR), DSC, TGA, chromatographic (GPC), and morphologic SEM.

Designing anti(-bio)fouling membranes with synergistic grafting of quaternized and zwitterionic polymers through surface initiated atom transfer radical polymerization

Membrane-based filtration technologies have significant potential to address the global problem of freshwater scarcity. However, fouling, caused by nonspecific adsorption of foulants and microbiological growth during filtration, remains a considerable concern. To address this, a rational surface design method comprising bifunctional coating with both defensive and attacking techniques has been devised, which can successfully decrease fouling and biofouling. To generate a bifunctional membrane, a single-step surface-initiated atom-transfer radical polymerization (SI-ATRP) of monomers with zwitterionic and quaternized imidazolium moieties was done on a polydopamine (PDA) primed polyvinylidene fluoride (PVDF) membrane. The PDA layer’s catechol functionalities provided abundant anchoring sites, allowing the grafting of a dense polymer layer on the membrane. The addition of active zwitterionic and quaternized imidazolium moieties in the grafted polymer chains resulted in very low fouling and microbiological species death. Extensive antifouling studies revealed that the functionalized membranes have excellent flux recovery (>93%), low irreversible fouling (<8.5%), and long-term filtration stability. This surface functionalization strategy based on a bifunctional unit represents a significant advancement in fouling mitigation by minimizing membrane-foulant interactions and killing adhered bacteria, with the potential to significantly broaden the range of membrane-based filtration applications and contribute to more efficient and sustainable water purification processes.

Reversible bacteria-killing and bacteria-releasing cotton fabric with anti-bacteria adhesion ability for potential sustainable protective clothing applications

Multifunctional antibacterial surfaces are playing an essential role in various areas. Smart antibacterial materials equipped with switchable “bacteria-killing” and “bacteria-releasing” abilities have been created by scientists. However, most of them are either biologically incompatible, or complex fabricating procedures, or cannot prevent themselves from being attached by bacteria. In this work, a double-layer smart antibacterial surface was created easily by simple surface initiate atom transfer radical polymerization: the upper layer PSBMA provides anti-bacteria adhesion capacity, the NCl bond can show bacteria-killing ability and the under layer PNIPAM can exhibit bacteria-releasing property. Remarkably, the NCl bond can interconvert with the NH bond easily, which allows switching between bacteria-killing and bacteria-releasing. As a result, the functional cotton fabrics can resist about 99.66 % of bacteria attaching, kill nearly 100 % of attached bacteria after 5 min contacting and release about 99.02 % of the formerly attached bacteria. Furthermore, the functional cotton fabric kept excellent anti-bacteria adhesion ability (about 99.27 %) and bacteria-releasing capacity (about 98.30 %) after 9 cycles of re-chlorination. In general, a reversible “bacteria-killing” and “bacteria-releasing” cotton fabric was fabricated with well anti-bacteria adhesion capacity in a simple way, and this smart multifunctional cotton fabric shows a great potential application in reusable protective clothing.

UV Irradiation-Induced Cyclic-to-Linear Topological Changes of a Light/pH Dual-Sensitive Cyclic Copolymer for Enhanced Drug Delivery.

Cyclic polymers with cleavable backbones triggered by either external or internal stimuli can realize simultaneous extracellular stability and intracellular destabilization of cyclic polymer-based nanocarriers but remain seldom reported. To this end, we prepared herein cyclic-ONB-P(OEGMA-st-DMAEMA) (c-ONB-P(OEGMA-st-DMAEMA)) with a light-cleavable junction in the polymer backbone based on oligo (ethylene glycol) monomethyl ether methacrylate (OEGMA) and N,N-dimethylaminoethyl methacrylate (DMAEMA) using a light-cleavable atom transfer radical polymerization (ATRP) initiator containing an o-nitrobenzyl (ONB) ester group. Together with the pH-sensitivity of DMAEMA, c-ONB-P(OEGMA-st-DMAEMA) shows a light-cleavable mainchain and pH-sensitive side chains. Notably, doxorubicin (DOX)-loaded c-ONB-P(OEGMA4-st-DMAEMA38) (C2) micelles mediated an IC50 value of 2.28 μg/mL in Bel-7402 cells, which is 1.7-fold lower than that acquired without UV irradiation. This study thus reported the synthesis of a cyclic copolymer with a UV-cleavable backbone and uncovered the effects of topological modulation on the in vitro controlled release properties of cyclic polymers.

Host-guest mediated electrochemical MiRNA-21 sensing via nanozymes Mn-PCN-222 catalysis

In this work, a host-guest mediated electrochemical sensor for miRNA-21 via nanozymes Mn-PCN-222 catalysis was reported. In brief, the atom transfer radical polymerization (ATRP) reaction was enabled via the continuous conversion of hydrogen peroxide (H2O2) to hydroxyl radicals (HO∙) via Mn-PCN-222. Specifically, miRNA-21 was captured and immobilized on the surface of an indium tin oxide (ITO) electrode using complementary DNA (Cp-DNA). In this way, miRNA-21 provided a sequence that can hybridize with F-DNA(ferrocene modified DNA primer). At the same time, an ATRP initiator (β-CD-Br15) was attached to the electrode through host-guest interaction. The controlled polymerization of ferrocene methyl methacrylate (FcMMA) using β-CD-Br15 for continuous activator regeneration (ICAR) ATRP yields polymer FcMMAn with a high square wave voltammetry (SWV) signal in the presence of target miRNA-21. Without added miRNA-21, a lower SWV current was observed because β-CD-Br15 was not successfully modified onto the ITO electrode. The biosensor has also been used in the detection of serum samples. Moreover, the proposed host-guest mediated electrochemical biosensor has potential in bioanalytical applications for sensitive detection of biomolecules.

RNA-Polymer Hybrids via Direct and Site-Selective Acylation with the ATRP Initiator and Photoinduced Polymerization.

Combining synthetic polymers with RNA paves the way for creating RNA-based materials with non-canonical functions. We have developed an acylation reagent that allows for direct incorporation of the atom transfer radical polymerization (ATRP) initiator into both short synthetic oligoribonucleotides and natural biomass RNA extracted from torula yeast. The acylation was performed in a quantitative yield. The resulting initiator-functionalized RNAs were used for grafting polymer chains from the RNA by photoinduced ATRP, resulting in RNA-polymer hybrids with narrow molecular weight distributions. The RNA initiator was used for the polymerization of oligo(ethylene oxide) methyl ether methacrylate, poly(ethylene glycol) dimethacrylate, and N-isopropylacrylamide monomers, resulting in RNA bottlebrushes, hydrogels, and stimuli-responsive materials. This approach, readily applicable to both post-synthetic and nature-derived RNA, can be used to engineer the properties of a variety of RNA-based macromolecular hybrids and assemblies providing access to a wide variety of RNA-polymer hybrids.

Use of a Photocleavable Initiator to Characterize Polymer Chains Grafted onto a Metal Plate with the Grafting-from Method.

The thorough characterization of polymer chains grafted through a "grafting-from" process onto substrates based on the determination of number (Mn) and weight (Mw) average molar masses, as well as dispersity (Ɖ), is quite challenging. It requires the cleavage of grafted chains selectively at the polymer-substrate bond without polymer degradation to allow their analysis in solution with steric exclusion chromatography, in particular. The study herein describes a technique for the selective cleavage of PMMA grafted onto titanium substrate (Ti-PMMA) using an anchoring molecule that combines an atom transfer radical polymerization (ATRP) initiator and a UV-cleavable moiety. This technique allows the demonstration of the efficiency of the ATRP of PMMA on titanium substrates and verification that the chains were grown homogeneously.

Fabrication of localized surface plasmon resonance sensors with scalable polyvinyltetrazole/copper cluster hybrid ring-array for Cu(II) detection

The bottom of a hole-array photoresist template deposited with a hydrophobic atom-transfer radical polymerization (ATRP) initiator was wetted by treatment with oxygen plasma. After the removal of the photoresist template, ring patterns of the ATRP initiator were formed at the interface between the hydrophobic and wetting regions. Polyacrylonitrile (PAN) was grafted from the initiator ring array to covert to polyvinyltetrazole (PVT) rings via a cyano-to-tetrazole reaction, which could adsorb Cu(II) at various concentrations. The Cu(II) ions within the PVT rings were reduced to form a PVT–copper hybrid ring (VCHR), resulting in a blue-shift of the localized surface plasmon resonance (LSPR) peak as the Cu(II) was adsorbed by the PVT rings. The blue-shift and Cu(II) concentration were linearly correlated, with a detection limit of ∼25 pg mL−1 and a linear range of 25–400 pg mL−1 for Cu(II) detection. Although the PVT rings also chelated Pb(II) and Cr(III), these ions did not exhibit obvious LSPR peaks. The VCHR LSPR sensor exhibited excellent selectivity for Cu(II) detection. Combining lithography and plasma technology provides a versatile platform for developing the scalable ring structure of copper for highly sensitive and selective Cu(II) sensing.