The present article aims to study the suppression of vortex shedding using a passive flow control technique (slit through a circular cylinder) in the laminar regime (Re =100–500). The slit width ratio S/D (slit width/diameter) on the modified cylinder plays an essential role to control the vortex shedding. The additional flow through the slit leads to the suppression of the global instability and vortex shedding, whereas a large amount of flow through the slit drastically alters the behavior of vortex shedding. The nature of vortex shedding remains periodic for all S/D, and the root mean square (rms) value of the lift coefficient decreases (in turn, vortex shedding suppression) with S/D up to Re ≤ 300. For the range Re > 300, the root mean square (rms) value of the lift coefficient decreases up to S/D < 0.15, and the flow exhibits periodic vortex shedding, while the root mean square (rms) increases beyond S/D > 0.15 due to irregular vortex shedding downstream of cylinder. The variation of the Re for the S/D =0.20 shows bifurcation points where the flow changes its behavior from symmetric to asymmetric solution at Re=232 and again becomes symmetric at Re=304. The unsteady flow analysis over the modified cylinder also indicates the suppression in the vortex shedding; however, the analysis provides the qualitative property of suppression. The reduced-order modeling, i.e. Proper Orthogonal Decomposition (POD) and Dynamic Mode Decomposition (DMD), is utilized to quantify suppression and investigate the dominant vortical structure for slit through the cylinder.