Asymmetric Disulfides Research Articles

A Photovoltaic Self-Powered Volatile Organic Compounds Sensor Based on Asymmetric Geometry 2D MoS2 Diodes

Transition metal dichalcogenides have gained considerable interest for vapour sensing applications due to their large surface-to-volume ratio and high sensitivity. Herein, we demonstrate a new self-powered volatile organic compounds (VOC) sensor based on asymmetric geometry multi-layer molybdenum disulfide (MoS2) diode. The asymmetric contact geometry of the MoS2 diode induces an internal built-in electric field resulting in self-powering via a photovoltaic response. While illuminated by UV-light, the sensor exhibited a high responsivity of ∼60% with a relatively fast response time of ∼10 sec to 200 ppm of acetone, without an external bias voltage. The MoS2 VOC diode sensor is a promising candidate for self-powered, fast, portable, and highly sensitive VOC sensor applications.

Photochemical oxidative coupling of thiols to disulfides using Bi quantum dots: Mild and efficient catalysis

Herein, we present an efficient synthesis method utilizing Bi quantum dots (QDs) as catalysts for the photochemical oxidative coupling of thiols to disulfides under mild conditions. The protocol offers low catalyst loading, simplicity in reaction setup as well as high efficiency. Aromatic thiols and aliphatic thiols are successfully transformed into disulfides with good to quantitative yields, demonstrating tolerance to various substituents and heterocycles. Additionally, the protocol extends to the synthesis of asymmetric disulfides and allows for gram-scale synthesis.

Electrochemical promoted three-component reaction to unsymmetric thiosulfonates.

Compounds comprising S-S bonds serve as significant pharmacological scaffolds in medicinal chemistry and natural products. We have devised an efficient electrochemical method for the construction of asymmetric disulfide bonds, leading to the synthesis of unsymmetric thiosulfonates. Compared with existing synthesis methods, our work not only avoids the use of metals and oxidants, but also realizes the operation of a one-pot three-component method, which makes this strategy extremely attractive.

Chemoselective Synthesis of Asymmetric Disulfides

Key words acid activation - allylation - C–S bond formation - disulfides - sulfur

Unsymmetrical aromatic disulfides as SARS-CoV-2 Mpro inhibitors: Molecular docking, molecular dynamics, and ADME scoring investigations

COVID-19 pandemic caused by very severe acute respiratory syndrome coronavirus-2 (SARS-CoV-2) agent is an ongoing major global health concern. The disease has caused more than 452 million affected cases and more than 6 million death worldwide. Hence, there is an urgency to search for possible medications and drug treatments. There are no approved drugs available to treat COVID-19 yet, although several vaccine candidates are already available and some of them are listed for emergency use by the world health organization (WHO). Identifying a potential drug candidate may make a significant contribution to control the expansion of COVID-19. The in vitro biological activity of asymmetric disulfides against coronavirus through the inhibition of SARS-CoV-2 main protease (Mpro) protein was reported. Due to the lack of convincing evidence those asymmetric disulfides have favorable pharmacological properties for the clinical treatment of Coronavirus, in silico evaluation should be performed to assess the potential of these compounds to inhibit the SARS-CoV-2 Mpro.In this context, we report herein the molecular docking for a series of 40 unsymmetrical aromatic disulfides as SARS-CoV-2 Mpro inhibitor. The optimal binding features of disulfides within the binding pocket of SARS-CoV-2 endoribonuclease protein (Protein Data Bank [PDB]: 6LU7) was described. Studied compounds were ranked for potential effectiveness, and those have shown high molecular docking scores were proposed as novel drug candidates against SARS-CoV-2. Moreover, the outcomes of drug similarity and ADME (Absorption, Distribution, Metabolism, and Excretion) analyses have may have the effectiveness of acting as medicines, and would be of interest as promising starting point for designing compounds against SARS-CoV-2. Finally, the stability of these three compounds in the complex with Mpro was validated through molecular dynamics (MD) simulation, in which they displayed stable trajectory and molecular properties with a consistent interaction profile.

Aromatic disulfides as potential inhibitors against interaction between deaminase APOBEC3G and HIV infectivity factor.

APOBEC3G (A3G) is a member of cytosine deaminase family with a variety of innate immune functions. It displays activities against retrovirus and retrotransposon by inhibition of virus infectivity factor (Vif)-deficient HIV-1 replication. The interaction between A3G N-terminal domain and Vif directs the cellular Cullin 5 E3-ubiquitin ligase complex to ubiquitinate A3G, and leads to A3G proteasomal degradation, which is a potential target for anti-HIV drug. Currently, there are very few reports about stable small molecules targeting the interaction between A3G and Vif. In this study, we screened two series of small molecules containing carbamyl sulfamide bond or disulfide bond as bridges of two different aromatic rings. Five asymmetrical disulfides were successfully identified against interaction between A3G and Vif with the IC 50 values close to or smaller than 1 μM, especially, not through covalently binding with A3G or Vif. They restore the A3G expression in the presence of Vif by inhibiting Vif-induced A3G ubiquitination and degradation. This study opens a way to the discovery of new anti-HIV drugs.

Effect of ultraviolet on thiamine and thiamine disulfides

In a neutral medium, the exposure of thiamine disulfide to the ultraviolet of solar radiation (as well as to the ultraviolet radiation of mercury lamp with λ > 300 nm) results in the formation of a thiamine molecule with closed thiazole ring and a molecule of thiamine thiazolone. Asymmetric thiamine disulfides, e.g., thiamine propyl disulfide, on exposure to ultraviolet (UVA range) produced thiamine and propyl disulfides. Thiamine and thiazolone of thiamine are stable upon exposure to light of 320-400 nm (UVA range). UV irradiation within spectral range of 200-300 nm results in further photodestruction of thiamine and thiamine thiazolone and production of 2-methyl-4-amino-5aminomethyl-pyrimidine as the main photoproduct. The possibility to use thiamine disulfide derivatives as a promising class of anti-cataract drugs as well as drugs to decrease the toxic effect of ultraviolet radiation on human retina is discussed.

Synthesis of Abietane-derived Disulfides with Monosaccharide Fragments

A series of asymmetric disulfides was obtained in yields of 38–50% by the co-oxidation of a mixture of diterpene abietane-derived thiols and thiols synthesized from protected monosaccharides with galacto-, fructo-, and glucopyranose and ribofuranose fragments. After removal of the acetyl protection in the disulfide containing 1,2,3,4-tetra-O-acetyl-β-D-glucopyranose and dehydroabietane moieties, a disulfide with free glucose hydroxyl groups was obtained in a yield of 94%.

Synthesis of unsymmetrical disulfides via PPh3-mediated reductive coupling of thiophenols with sulfonyl chlorides.

A facile and rapid synthesis of unsymmetrical aryl disulfides using PPh3-mediated reductive coupling of thiophenols with aryl sulfonyl chlorides was described. Good functional group tolerance and scalability were achieved in this strategy. More importantly, the approach enables the introduction of sulfonyl chlorides into the synthesis of asymmetric organic disulfides under catalyst- and base-free conditions. Using this method, unsymmetrical aromatic disulfides could be prepared from inexpensive and readily available starting materials in moderate to excellent isolated yields, through a nucleophilic substitution pathway.

The oxidation of cysteine-containing peptides caused by perfluoroalkane sulfonyl fluorides

Perfluorooctane sulfonyl fluoride (PFOSF) is the precursor of many fluorochemicals that are ubiquitous in the environment. However, its distribution and toxicology are rarely studied. In this work, the oxidability of PFOSF was found. PFOSF can accelerate oxidation of glutathione (GSH) to its oxidized form GSSG, and itself is reduced to a sulfinic acid. The yielded sulfinic acid was prepared and identified with high resolution mass spectrometry and NMR. Similar redox reactions were observed for PFOSF’s short chain alternatives. The reduction potentials of perfluoroalkane sulfonyl fluorides (PFASFs) were determined to be −2.13 V vs. SCE with cyclic voltammetry, further demonstrating their oxidability. The peptide mixtures of GSH plus another cysteine-containing peptide were also oxidized by PFASFs to GSSG and an asymmetric disulfide GS-S-PEP. A single short-sequence PEP-SH could be oxidized to the symmetric disulfide PEP-S-S-PEP as the final product. In vitro experiments were carried out by adding PFASFs into rat liver S9 fractions. The turnover ratio of PFASFs were calculated to be about 4–10% by quantification of sulfinic acid with LC–MS/MS. Our work illustrates one of the potential metabolic pathways of PFASFs and demonstrates the oxidation of PEP-SHs by PFASFs, thus providing a preliminary exploration in the toxicology of these fluorochemicals.

Freeze the dynamicity: charge transfer complexation assisted control over the reaction pathway.

Charge transfer (CT) complexes between electron donor and acceptor molecules provide unique alternate D-A arrangements. However, these arrangements cannot be fully translated into chemo-selective organic transformations as the dynamicity of CT complexes in solution results in the co-existence of D-A assemblies and free monomers during the reaction time-scale. A conceptually new strategy to exploit CT complexes toward chemo-selective products by means of seizing the dynamicity of CT complexes is reported here. Aqueous CT complexes of donor and acceptor molecules bearing reactive thiol groups were frozen instantly and cryo-desiccated to get the alternate D-A assemblies intact in the solid state. Oxidation of reactive thiols in an oxygen rich solvent in the solid state resulted in the formation of the hetero-dimer exclusively. CT complexation and appropriate molecular arrangements are the key factors behind successful execution of this novel methodology. The strategy also paves the way to prepare unsymmetrical disulfide molecules from two dissimilar thiols.

Conformations of cysteine disulfides of peptide toxins: Advantage of differentiating forward and reverse asymmetric disulfide conformers

Conformations of cysteine disulfides were analyzed in X-ray, nuclear magnetic resonance (NMR), and co-crystal structures of peptide toxins retrieved from Protein Data Bank. The parameters side chain torsional angles, disulfide strain energy, interatomic Cα/Cβ distances, and Ramachandran angles were used as probes to derive conformational features of cysteine disulfides. Schmidt, Ho, and Hogg (2006) Allosteric disulfide bonds. Biochemistry, 45, 7429–7433 scheme was adapted to classify the disulfide conformations of peptide toxins. Anomalies were observed while treating “forward” and “reverse” asymmetric disulfide conformers as same disulfide conformation in peptide toxins. Thus, new scheme was proposed to classify “forward” and “reverse” asymmetric disulfide conformers separately. Total available conformers space for classification of toxins disulfides is 32. Interestingly, all 32 disulfide conformations are observed in peptide toxins. –LHSpiral is predominant disulfide conformation of peptide toxins. Significant variations were observed in population of occurrence of disulfide conformers, disulfide strain energy, and distribution of DCα-Cα and DCβ-Cβ values between X-ray, NMR, and co-crystal structures of peptide toxins. The observed differences in conformations of disulfides of same peptide toxins between different states were used as platform to demonstrate advantage of differentiating forward and reverse asymmetric disulfide conformers. Newly proposed scheme allows accurate representation of true conformational diversity of disulfides between X-ray and NMR structures of same peptide toxins. Newly proposed scheme also permits to derive additional structural information from nomenclature which was illustrated by comparing conformations of disulfides between unbound and bound form of toxin with channel/receptor. The results will be of interest for growing field of structural venomics and conformational analysis of peptide/protein disulfides.Communicated by Ramaswamy H. Sarma

Poly(S-ethylsulfonyl-l-homocysteine): An α-Helical Polypeptide for Chemoselective Disulfide Formation

Homocysteine and cysteine are the only natural occurring amino acids that are capable of disulfide bond formations in peptides and proteins. The chemoselective formation of asymmetric disulfide bonds, however, is chemically challenging and requires an activating group combining stability against hard nucleophiles, e.g., amines, with reactivity toward thiols and soft nucleophiles. In light of these considerations, we introduced the S-alkylsulfonyl cysteines in our previous work. Here, we present the synthesis and ring-opening polymerization of S-ethylsulfonyl-l-homocysteine N-carboxyanhydrides. We demonstrate that the polymerization leads to narrowly distributed polypeptides (Đ = 1.1–1.3) with no detectable side reactions in a chain length regime from 11 to 165. In contrast to the already reported cysteine derivatives, poly(S-ethylsulfonyl-l-homocysteine)s do not form β-sheets, which reduce solubility and limit the degree of polymerization of poly(S-ethylsulfonyl-l-cysteine)s to 50. Instead, these polymers...

Frontispiece: Of Thiols and Disulfides: Methods for Chemoselective Formation of Asymmetric Disulfides in Synthetic Peptides and Polymers

In poly(S-alkylsulfonyl)-l-cysteines, an exciting combination of properties is merged to enable asymmetric disulfide formation in a chemoselective manner, while promoting directed self-assembly in solution by β-sheet formation. These properties allow the straightforward synthesis of core–shell nanoparticles with decoupled control over morphology and functionality. For more information on the latest results in this field, see the Concept article by O. Schäfer and M. Barz on page 12131 ff.

Of Thiols and Disulfides: Methods for Chemoselective Formation of Asymmetric Disulfides in Synthetic Peptides and Polymers.

In protein or peptide chemistry, thiols are frequently chosen as a chemical entity for chemoselective modification reactions. Although it is a well-established methodology to address cysteines and homocysteines in aqueous media to form S-C bonds, possibilities for the chemoselective formation of asymmetric disulfides have been less approached. Focusing on bioreversibility in conjugation chemistry, the formation of disulfide bonds is highly desirable for the attachment of thiol-containing bioactive agents to proteins or in cross-linking reactions, because disulfide bonds can combine stability in blood with degradability inside cells. In this Concept article, recent approaches in the field of activating groups for thiol moieties incorporated in peptide and polymer materials are highlighted. Advantageous combinations of stability during synthesis of the material with high reactivity towards thiols are explored focusing on simplification and prevention of side reactions as well as additional deprotection and activation steps prior to disulfide formation. Moreover, applications of this chemistry are highlighted and future perspectives are envisioned.

Copper(I)-Catalyzed Three-Component Click/Persulfuration Cascade: Regioselective Synthesis of Triazole Disulfides.

A copper(I)-catalyzed three-component CuAAC/persulfuration reaction providing rapid access to asymmetric triazole disulfides has been developed. The interrupted click reaction shows broad substrate scope, complete regioselectivity, and excellent functional group tolerability.

A Route to Alkynyl Sulfides and Asymmetric Disulfides from Sodium Arylsulfiniate

A Route to Alkynyl Sulfides and Asymmetric Disulfides from Sodium Arylsulfiniate

Synthesis of S-linked trisaccharide glycal of derhodinosylurdamycin A: Discovery of alkyl thiocyanate as an efficient electrophile for stereoselective sulfenylation of 2-deoxy glycosyl lithium

Stereoselective synthesis of S-linked trisaccharide glycal of angucycline antitumor antibiotic derhodinosylurdamycin A is described. The synthesis has been accomplished employing our previously reported umpolung S-glycosylation strategy ― stereoselective sulfenylation of 2-deoxy glycosyl lithium. It was found that sugar-derived thiocyanate was a better electrophile than corresponding asymmetric disulfide in this type of stereoselective sulfenylation.

Structural basis of PDZ-mediated chemokine receptor CXCR2 scaffolding by guanine nucleotide exchange factor PDZ-RhoGEF

The CXC chemokine receptor 2 (CXCR2) is a G protein coupled receptor mediating interleukin-8 chemotactic signaling and plays an important role in neutrophil mobility and tumor migration. However, efficient CXCR2 signaling requires PDZ domain-mediated scaffolding of signaling complexes at the plasma membrane and functional coupling of the signaling to specific downstream signaling pathways, in which only one PDZ protein has been characterized to interact with CXCR2. Here, we identified five novel CXCR2-binding PDZ-containing proteins, among which PDZ-RhoGEF is of particular interest because this PDZ and RGS-containing guanine nucleotide exchange factor (GEF) is also involved in cell signaling and mobility. To reveal the molecular basis of the interaction, we solved the crystal structure of PDZ-RhoGEF PDZ domain in complex with the CXCR2 C-terminal PDZ binding motif. The structure reveals that the PDZ–CXCR2 binding specificity is achieved by numerous hydrogen bonds and hydrophobic contacts with the last four CXCR2 residues contributing to specific interactions. Structural comparison of CXCR2-binding PDZ domains and PDZ-RhoGEF PDZ bound with different ligands reveals PDZ- and ligand-specific interactions that may underlie the ability of promiscuous CXCR2 binding by different PDZ domains and PDZ binding promiscuity. The structure also reveals an unexpected asymmetric disulfide bond-linked PDZ dimer that allows simultaneous parallel binding of CXCR2 to two PDZ domains. This study provides not only the structural basis for PDZ-mediated CXCR2–PDZ-RhoGEF interaction, but also a new mode of PDZ dimerization, which both could prove valuable in understanding signaling complex scaffolding in CXCR2 signaling and coupling to specific signaling pathways.

The solubility of synthetic asymmetric allyl disulfides in subcritical and supercritical media

The solubility of two synthetic asymmetric allyl disulfides, allyl 8-quinolyl disulfide and allyl benzothiazol-2-yl disulfide, in subcritical Freon R22 and Freon R410a, as well as supercritical carbon dioxide, at a temperature of 40°C and a pressure of 200 bar is determined by a dynamic flow method. It is shown that Freon R22 is a promising solvent for practical applications of allyl disulfides.