Assessment Of Bone Quality Research Articles

Feasibility Study of 3D FACT and IVIM Sequences in the Evaluation of Female Osteoporosis

Background: The aim of this study is to search for the predictive value of 3D fat analysis and calculation technique (FACT) and intravoxel incoherent motion (IVIM) parameters in identifying osteoporosis in women. Methods: We enrolled 48 female subjects who underwent 3.0 T MRI, including 3D FACT and IVIM sequences. Bone mineral density (BMD) values and Fracture Risk Assessment (FRAX) scores were obtained. Proton density fat fraction (PDFF) in the bone marrow and the real diffusion (D) value of intervertebral discs were measured on 3D FACT and IVIM images, respectively. Accuracy and bias were assessed by linear regression analysis and Bland–Altman plots. Intraclass correlation coefficients were used to assess the measurements’ reproducibility. Spearman’s rank correlation was applied to explore the correlation. MRI-based parameters were tested for significant differences among the three groups using ANOVA analyses. A receiver operating characteristic (ROC) analysis was performed. Results: The PDFF of the vertebral body showed a negative correlation with BMD (R = −0.393, p = 0.005) and a positive correlation with the FRAX score (R = 0.706, p < 0.001). The D value of intervertebral discs showed a positive correlation with BMD (R = 0.321, p = 0.024) and a negative correlation with the FRAX score (R = −0.334, p = 0.019). The area under the curve values from the ROC analysis showed that the 3D FACT and IVIM sequences could accurately differentiate between normal and osteoporosis (AUC = 0.88 using the PDFF; AUC = 0.77 using the D value). The PDFF value demonstrated a sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of 78.6%, 89.5%, 84.6%, and 85.0%, respectively, in its ability to predict osteoporosis. The D value had a sensitivity, specificity, PPV, and NPV of 63.16%, 92.9%, 65.0%, and 77.8%, respectively, for predicting osteoporosis. Conclusions: The 3D FACT- and IVIM-measured PDFF and D values are promising biomarkers in the assessment of bone quality and fracture risk.

Solitary wave-based site-specific bone quality assessment: A numerical study of the proximal femur

We examine numerically the feasibility of using a relatively new solitary wave-based non-destructive test (NDT) method for site-specific bone quality assessment. Towards this end, we present numerical predictions of the effective elastic modulus of trabecular bone in the proximal femur using highly nonlinear solitary waves (HNSWs) propagating in a one-dimensional chain of spherical steel particles. A computational bone reconstruction technique, enabled through topology optimization, is developed to generate high-resolution finite-element models representing the complex architecture of the trabecular network in the femoral neck region of the proximal femur. The reconstructed bone microstructure models are then used as the inspection medium in a virtual NDT setup in the form of a hybrid discrete-element/finite-element (DE/FE) model, capable of simulating the propagation of HNSWs in the granular chain and their interaction with the bone microstructures. By inserting a face sheet between the granular chain and the porous trabecular bone model, our calculations evince that dynamic loading by the incident solitary wave results in nearly uniaxial deformation of the bone microstructure (rather than localized contact indentations), and this is shown to enhance the accuracy and reliability of the solitary wave-based prediction of the bone’s effective elastic modulus. Using the delay of the primary reflected solitary wave in the estimation of the elastic modulus of bone, we are able to estimate the effective elastic moduli of the porous bone models with adequate accuracy. Based on these numerical findings, we believe that solitary wave-based non-destructive evaluation of computationally reconstructed artificial bone models could form the baseline for advanced bone quality assessment tools.

Use of Distal Tibial Cortical Bone Thickness and FRAX Score for Further Treatment Planning in Patients with Trimalleolar Ankle Fractures.

A total of 193 patients with a trimalleolar ankle fracture treated between 2011 and 2020 were included. Patient registries were reviewed regarding demographics, mechanism, and type of injury. The CBTT was assessed in radiographs and CT images. The FRAX score was calculated to estimate the probability for an osteoporotic fracture. A multivariable regression model was calculated to identify independent variables affecting the cortical bone thickness of the distal tibia. Patients older than 55 years were 4.22 (95% CI: 2.12; 8.38) times more likely to be female. In the multivariable regression analysis, female sex (β -0.508, 95% CI: -0.739; -0.278, p < 0.001) and a higher age (β -0.009, 95% CI: -0.149; -0.003, p = 0.002) were independent variables associated with a lower CBTT. Patients with a CBTT < 3.5 mm had a higher 10-year probability for a major osteoporotic fracture (12% vs. 7.75%; p = 0.001). The assessment of the peripheral bone quality in routine computed tomography demonstrated that higher age and female sex are significantly associated with reduced cortical bone thickness of the distal tibia. Patients with a lower CBTT showed a higher probability for a subsequent osteoporotic fracture. In female patients with reduced distal tibial bone quality and associated risk factors, an osteoporosis assessment should be evaluated.

Clinical Assessment of Bone Quality at Implant Site using CBCT and Hounsfield Unit.

The current research was done to assess the bone quality at implant site using CBCT. The present study was conducted on 50 partially edentulous patients of both genders. All subjects had their chests scanned using a Kodac machine set to 120 kVp, 12 mA, and a 17-second exposure time. Using Hounsfield units, bone quality was classified as D1, D2, D3, D4, and D5 (HU). Out of 50 patients, 27 were males and 23 were females. The average HU was 786.1 at the anterior maxilla, 1174.3 at the anterior mandible, 332.1 at the posterior maxilla, and 742.4 at the posterior mandible. The variation was considerable (P-0.01). The anterior mandible, anterior maxilla, posterior mandible, and posterior maxilla were found to have the highest densities. Based on Hounsfield units, CBCT is helpful in determining the bone density at the implant site.

Quality and quantity of bone at intraoral graft donor sites in type 2 diabetic patients versus healthy controls: A cone-beam computed tomography study

Objectives: This study aimed to compare the quality and quantity of bone at intraoral autogenous graft donor sites in type II diabetes mellitus (DM) patients versus healthy controls using cone-beam computed tomography (CBCT). Materials and methods: This case-control study was conducted on CBCT scans of 50 DM patients and 50 healthy controls between 20-70 years. Maximum height, width, length, and volume of harvestable bone at the symphysis, ramus, palate, and tuberosity were measured bilaterally. The Hounsfield unit (HU) was also calculated to assess bone quality. The two groups were compared regarding the quality and quantity of harvestable bone using an independent t-test. The effect of confounders was analyzed by the regression model (alpha = 0.05). Results: DM patients had significantly lower harvestable bone volume at the symphysis, ramus, and tuberosity than healthy controls (p &lt; 0.001) but this difference was not significant at the palate (p = 0.957). Also, bone quality was significantly lower at the symphysis, ramus, palate, and tuberosity in DM patients (p &lt; 0.001). Conclusion: Diabetic patients had significantly lower bone quality and quantity at intraoral graft donor sites than healthy controls. Mandibular symphysis had higher bone volume and density than ramus, palate, and tuberosity for graft harvesting in diabetic patients.

Associations of Lean Mass, Muscular Strength, and Physical Function with Trabecular Bone Score in Older Adults

Introduction/Background: Trabecular bone score (TBS) is an indirect measurement of bone quality and microarchitecture determined from dual-energy X-ray absorptiometry (DXA) imaging of the lumbar spine. TBS predicts fracture risk independent of bone mass/density, suggesting this assessment of bone quality adds value to the understanding of patients’ bone health. While lean mass and muscular strength have been associated with higher bone density and lower fracture risk among older adults, the literature is limited regarding the relationship of lean mass and strength with TBS. The purpose of this study was to determine associations of DXA-determined total body and trunk lean mass, maximal muscular strength, and gait speed as a measure of physical function, with TBS in 141 older adults (65-84 yr, 72.5 +/- 5.1 yr, 74% women). Methodology: Assessments included lumbar spine (L1-L4) bone density and total body and trunk lean mass by DXA, lower body (leg press) and upper body (seated row) strength by one repetition maximum tests, hand grip strength, and usual gait speed. TBS was derived from the lumbar spine DXA scan. Multivariable linear regression determined the contribution of proposed predictors to TBS. Results: After adjusting for age, sex, and lumbar spine bone density, upper body strength significantly predicted TBS (unadjusted/adjusted R2= 0.16/ 0.11, β coefficient =0.378, p=0.005), while total body lean mass index showed a trend in the expected direction (β coefficient =0.243, p=0.053). Gait speed and grip strength were not associated with TBS (p>0.05). Conclusion: Maximum strength of primarily back muscles measured as the seated row appears important to bone quality as measured by TBS, independent of bone density. Additional research on exercise training targeting back strength is needed to determine its clinical utility in preventing vertebral fractures among older adults.

Strong Correlation Between the Vertebral Bone Quality Score and the Cervical-Vertebral Bone Quality Score in Spine Surgery Patients

Osteoporosis is a burgeoning public health problem for over 44 million people in the United States. The magnetic resonance imaging (MRI)-based vertebral bone quality (VBQ) score and cervical VBQ (C-VBQ) score are two novel approaches that use data routinely gathered during preoperative evaluation to assess bone quality. The goal of this study was to investigate the relationship between the VBQ and C-VBQ scores. We performed a retrospective review of chart data for patients who underwent spine surgery for degenerative conditions between 2015 and 2022. Patients eligible for study inclusion had preoperative T1-weighted MRI of the lumbar and cervical spine available for review. Demographics of each patient were collected. The VBQ score was determined by dividing the median signal intensity (SI) of the L1-L4 vertebral bodies by the SI of the cerebrospinal fluid (CSF) at L3. The C-VBQ score was calculated by dividing the median SI of the C3-C6 vertebral bodies by the SI of the C2 CSF space. Pearson's correlation test was utilized to evaluate the association between the scores. We identified 171 patients, with a mean age of 57.44±11.79 years. The interrater reliability of the VBQ and C-VBQ measurements was excellent (intraclass correlation-coefficients 0.89 and 0.84, respectively). A statistically significant, positive correlation was found between the VBQ score and the C-VBQ score (r=0.757,p<0.001). This is the first study, to our knowledge, to assess the degree to which the newly developed C-VBQ score correlates with the VBQ score. We found a strong positive correlation between the scores.

Preventing Disused Bone Loss through Inhibition of Advanced Glycation End Products

Bone loss occurs in astronauts during long-term space flight, but the mechanisms are still unclear. We previously showed that advanced glycation end products (AGEs) were involved in microgravity-induced osteoporosis. Here, we investigated the improvement effects of blocking AGEs formation on microgravity-induced bone loss by using the AGEs formation inhibitor, irbesartan. To achieve this objective, we used a tail-suspended (TS) rat model to simulate microgravity and treated the TS rats with 50 mg/kg/day irbesartan, as well as the fluorochrome biomarkers injected into rats to label dynamic bone formation. To assess the accumulation of AGEs, pentosidine (PEN), non-enzymatic cross-links (NE-xLR), and fluorescent AGEs (fAGEs) were identified in the bone; 8-hydroxydeoxyguanosine (8-OHdG) was analyzed for the reactive oxygen species (ROS) level in the bone. Meanwhile, bone mechanical properties, bone microstructure, and dynamic bone histomorphometry were tested for bone quality assessment, and Osterix and TRAP were immunofluorescences stained for the activities of osteoblastic and osteoclastic cells. Results showed AGEs increased significantly and 8-OHdG expression in bone showed an upward trend in TS rat hindlimbs. The bone quality (bone microstructure and mechanical properties) and bone formation process (dynamic bone formation and osteoblastic cells activities) were inhibited after tail-suspension, and showed a correlation with AGEs, suggesting the elevated AGEs contributed to the disused bone loss. After being treated with irbesartan, the increased AGEs and 8-OHdG expression were significantly inhibited, suggesting irbesartan may reduce ROS to inhibit dicarbonyl compounds, thus suppressing AGEs production after tail-suspension. The inhibition of AGEs can partially alter the bone remodeling process and improve bone quality. Both AGEs accumulation and bone alterations almost occurred in trabecular bone but not in cortical bone, suggesting AGEs effects on bone remodeling under microgravity are dependent on the biological milieu.

Effects of Perioperative Teriparatide Treatment on the Hounsfield Unit Values at the Upper Instrumented Vertebra in Adult Spinal Deformity Surgery.

Retrospective single-center study. This study aimed to assess the effects of pre and postoperative teriparatide (TPTD) treatment on Hounsfield units (HU) after surgery for adult spinal deformity (ASD). The most commonly used method for assessing bone mineral density is dual-energy x-ray absorptiometry. HU values at the upper instrumented vertebra (UIV) have been proposed as a surrogate method for assessing bone quality, particularly in patients with ASD. However, the effect of TPTD treatment on vertebral HU values remains unclear. We identified 57 consecutive patients with ASD who underwent long-instrumented fusion surgery (>5 vertebrae) between 2014 and 2020. Patients were retrospectively divided into a non-TPTD group (n = 31) and a TPTD group (n = 26). HU measurements were obtained at a level above the UIV (UIV + 1). Changes in the HU value at 1-year postoperatively were compared between the TPTD and non-TPTD groups. The duration of preoperative TPTD was compared between the proximal junctional proximal junctional failure (PJF) and non-PJF groups. Preoperative HU values were significantly lower in the TPTD group than in the non-TPTD group, despite no significant difference in preoperative bone mineral density of the proximal femur between the two groups. Changes in HU values were significantly higher in the TPTD group than in the non-TPTD group (20.8 ± 15.7% vs -2 ± 10.2%, P < 0.001). In the subanalysis of the TPTD group, the duration of preoperative TPTD treatment was significantly shorter in the PJF group than in the non-PJF group (34.7 ± 16.8 days vs 86.9 ± 34.7 days, P = 0.004). Pre and post-operative TPTD treatment increased the average HU value at UIV + 1 by 20.8%. Therefore, more prolonged preoperative TPTD treatment improves bone quality and may help prevent osteoporosis-related complications.

The predictive value of Hounsfield units for titanium mesh cage subsidence after anterior cervical corpectomy and fusion.

To investigate whether bone mineral density (BMD) measured in Hounsfield units (HUs) correlates with titanium mesh cage (TMC) subsidence after anterior cervical corpectomy and fusion (ACCF). A total of 64 patients who underwent one or two levels of ACCF with TMC with a mean follow-up of 19.34 ± 7.86 months were analysed. HU values were measured three times in 3 different planes in the upper and lower vertebrae according to published methods. Subsidence was defined as segmental height loss of more than 3 mm. Pearson correlation analysis was performed. Receiver operating characteristic (ROC) curve analysis was used to obtain optimal thresholds. A multivariate logistic regression analysis was also conducted. Twenty-two patients (34.38%) had evidence of TMC subsidence on follow-up x-ray. The mean HU values in the subsidence group (317.34 ± 32.32, n = 22) were significantly lower than those in the nonsubsidence group (363.07 ± 25.23 n = 42, p < 0.001, t test). At last follow-up, mean disc height loss was 4.80 ± 1.16 mm in the subsidence group and 1.85 ± 1.14 mm in the nonsubsidence group (p < 0.001). There was a negative correlation between HU values and disc height loss (Pearson's coefficient -0.494, p < 0.001). HU values decreased gradually from the C3 vertebra to the C7 vertebra, and the HU values of the C5, C6, and C7 vertebrae in the nonsubsidence group were significantly higher than those in the subsidence group (p < 0.05). Furthermore, there were significant differences between the groups in the segmental angle at the last follow-up and the mean changes in segmental angle (p < 0.05). The area under the ROC curve was 0.859, and the most appropriate threshold of the HU value was 330.5 (sensitivity 100%, specificity 72.7%). The multivariate logistic regression analysis showed that older age (p = 0.033, OR = 0.879), lower LIV HU value (p < 0.001, OR = 1.053) and a greater segmental angle change (p = 0.002, OR 6.442) were significantly associated with a higher incidence of TMC subsidence after ACCF. There are strong correlations between a lower HU value and TMC subsidence after ACCF. More accurate assessment of bone quality may be obtained if HU measurement can be used as a routine preoperative screening method together with DXA. For patients with HU values <330.5, a more comprehensive and cautious preoperative plan should be implemented to reduce TMC subsidence.

Evaluation of radio-morphometric indices of mandible using digital panoramic radiography: a radiographic study

Background:Bone mineral density (BMD) varies with race, ethnicity, age, and gender. Thus arises the need for population-specific value ranges. Qualitative and quantitative indices of the mandible have also been used for panoramic radiographs to assess bone quality and to observe signs of resorption and osteoporosis.Aim:To measure the radio-morphometric indices in a digital panoramic radiograph and to find the inter-relationship of the indices with the age and sex of the patients. Materials and Methods:The study included 100 digital panoramic radiographic images of patients, and the samples were divided into four age groups. A panoramic radiograph of each patient was taken, and radio-morphometric indices were determined. Four indices, namely, cortical width at the gonion (GI) and below the mental foramen (MI), Mandibular cortical index (MCI) and Panoramic Mandibular Index (PMI), were measured bilaterally in all panoramic radiographs. All images were analyzed, and index values were calculated by applying linear measurements on the panoramic radiographs.Results: Statistically significant differences were observed among the study population.Conclusion:Radio-morphometric indices in a panoramic radiograph may possibly be used as a potential screening tool in identifying individuals with osteoporosis

Prediction of Pedicle Screw Loosening Using an MRI-Based Vertebral Bone Quality Score in Patients with Lumbar Degenerative Disease

To explore a new magnetic resonance imaging (MRI)-based bone quality assessment method for predicting pedicle screw loosening in the lumbar spine. We reviewed 174 patients aged ≥50years who were treated for lumbar degenerative diseases using posterior lumbar interbody fusion. All patients were followed-up for ≥12months. Based on the presence of radiolucent areas on follow-up MRI images, the patients were divided into loosening and nonloosening groups. The vertebral bone quality (VBQ) score was calculated using T1-weighted MRI images. Demographic data, health history, and radiological parameters were also recorded and compared between the 2 groups. Logistic regression analysis was used to predict the independent risk factors affecting screw loosening. Screw loosening occurred in 29.88% (52/174) of patients. A total of 83 screws (9.18%, 83/904) were loosened. There were differences in the age, fixation length, fixation at S1, preoperative and postoperative PI-LL, PT, preoperative LL, lowest bone mineral density (BMD), and VBQ scores (P<0.05) between the nonloosening and loosening groups. In the logistic regression, the VBQ score (OR=1.02 per point; 95% CI: 1.01-1.03; P < 0.001) was identified as an independent factor influencing screw loosening. As an independent risk factor for screw loosening after lumbar spine fusion, the VBQ score provides a new noninvasive protocol for assessing bone quality during surgical planning.

Comprehensive assessment of osteoporosis in lumbar spine using compositional MR imaging of trabecular bone.

To comprehensively assess osteoporosis in the lumbar spine, a compositional MR imaging technique is proposed to quantify proton fractions for all the water components as well as fat in lumbar vertebrae measured by a combination of a 3D short repetition time adiabatic inversion recovery prepared ultrashort echo time (STAIR-UTE) MRI and IDEAL-IQ. A total of 182 participants underwent MRI, quantitative CT, and DXA. Lumbar collagen-bound water proton fraction (CBWPF), free water proton fraction (FWPF), total water proton fraction (TWPF), bone mineral density (BMD), and T-score were calculated in three vertebrae (L2-L4) for each subject. The correlations of the CBWPF, FWPF, and TWPF with BMD and T-score were investigated respectively. A comprehensive diagnostic model combining all the water components and clinical characteristics was established. The performances of all the water components and the comprehensive diagnostic model to discriminate between normal, osteopenia, and osteoporosis cohorts were also evaluated using receiver operator characteristic (ROC). The CBWPF showed strong correlations with BMD (r = 0.85, p < 0.001) and T-score (r = 0.72, p < 0.001), while the FWPF and TWPF showed moderate correlations with BMD (r = 0.65 and 0.68, p < 0.001) and T-score (r = 0.47 and 0.49, p < 0.001). The high area under the curve values obtained from ROC analysis demonstrated that CBWPF, FWPF, and TWPF have the potential to differentiate the normal, osteopenia, and osteoporosis cohorts. At the same time, the comprehensive diagnostic model shows the best performance. The compositional MRI technique, which quantifies CBWPF, FWPF, and TWPF in trabecular bone, is promising in the assessment of bone quality. • Compositional MR imaging technique is able to quantify proton fractions for all the water components (i.e., collagen-bound water proton fraction (CBWPF), free water proton fraction (FWPF), and total water proton fraction (TWPF)) in the human lumbar spine. • The biomarkers derived from the compositional MR imaging technique showed moderate to high correlations with bone mineral density (BMD) and T-score and showed good performance in distinguishing people with different bone mass. • The comprehensive diagnostic model incorporating CBWPF, FWPF, TWPF, and clinical characteristics showed the highest clinical diagnostic capability for the assessment of osteoporosis.

Trabecular bone score in rheumatic disease

Patients with rheumatic diseases (RD) are at high risk of osteoporosis (OP) and osteoporotic fractures. The Trabecular bone score (TBS) is a relatively novel method of assessing bone quality, which independently predicts fracture risk regardless of bone mineral density (BMD). A lower TBS in patients with RD compared to controls is shown in most studies concerning TBS and RD. The data obtained indicate that TBS predicts fractures better in RD, especially in patients receiving glucocorticoids, than BMD or the FRAX algorithm. TBS degradation has been associated with disease activity in ankylosing spondylitis, systemic sclerosis, and rheumatoid arthritis in a few studies. However, there is little data in the literature on the effect of rheumatic disease therapy and OP treatment in patients with RD on predictive ability of TBS for incident fracture.

Reliability of Using Texture Analysis of Periapical Radiographs Obtained Using Radiovisiography for Assessing Bone Quality in Dental Implant Planning: A Cross-Sectional Study.

Background Pre-prosthetic implant radiographic imaging helps in the quantitative and qualitative analysis of the bone structure and also enables the evaluation of the relationship between critical structures and potential implant sites. Purpose The aim of the study was to define the reliability of utilizing the analysis of textures from the periapical radiographic imagesobtained through Radiovisiography (RVG) in order to better plan for dental implantations. Methods A cross-sectional study was conducted using 50 intraoral periapical radiographs which were obtained through RVGperformed prior to the placement of implants. The radiographs were segregated based on anatomical locations i.e. 12 for the anterior maxilla, nine for the posterior maxilla, seven for the anterior mandible, and 22 for the posterior mandible. Each of the radiographs was visually assessed by four experienced examiners, namely a Prosthodontist E1, Periodontist E2, Oral surgeon E3, and Oral radiologist E4, which was then compared to an experienced operator's tactile perception during a pilot drill for implant placement. As a reference, the Lekholm and Zarb classification was provided to all the examiners for them to qualitatively assess the bone structure in the radiographs. Results The examiners' results were correlated with the assessment provided by the experienced operator. E1 and E4 successfully assessed 42% of the radiographs while E2 had the least success with only 26%. Of the 12 anterior maxillary radiographs, only eight were accurately assessed by E1. With respect to the posterior maxilla, all examiners correctly assessed four radiographs each. Of the seven anterior mandibular radiographs, except for E2, the rest correctly assessed three radiographs each. Of the 22 posterior mandibular radiographs, only nine were accurately assessed by E4. Conclusion Intraoral periapical radiographsobtained through RVG did not meet the desired parameters for assessing the bone quality during the planning stage for implants.

Vertebral Bone Quality Score Independently Predicts Proximal Junctional Kyphosis and/or Failure After Adult Spinal Deformity Surgery.

Proximal junctional kyphosis (PJK) and proximal junctional failure (PJF) can be catastrophic complications associated with adult spinal deformity (ASD) surgery. These complications are markedly influenced by osteoporosis, leading to additional vertebral fracture and pedicle screw loosening. The MRI-based vertebral bone quality score (VBQ) is a newly developed tool that can be used to assess bone quality. To investigate the utility of the VBQ score in predicting PJK and/or PJF (PJF/PJK) after ASD correction. We conducted a retrospective chart review to identify patients age ≥50 years who had received ASD surgery of 5 or more thoracolumbar levels. Demographic, spinopelvic parameters, and procedure-related variables were collected. Each patient's VBQ score was calculated using preoperative T1-weighted MRI. Univariate analysis and multivariate logistic regression were performed to determine potential risk factors of PJK/PJF. Receiver operating characteristic analysis and area-under-the-curve values were generated for prediction of PJK/PJF. A total of 116 patients were included (mean age, 64.1 ± 6.8 years). Among them, 34 patients (29.3%) developed PJK/PJF. Mean VBQ scores were 3.13 ± 0.46 for patients with PJK/PJF and 2.46 ± 0.49 for patients without, which was significantly different between the 2 groups ( P < .001). On multivariate analysis, VBQ score was the only significant predictor of PJK/PJF (odds ratio = 1.745, 95% CI = 1.558-1.953, P < .001), with a predictive accuracy of 94.3%. In patients undergoing ASD correction, higher VBQ was independently associated with PJK/PJF occurrence. Measurement of VBQ score on preoperative MRI may be a useful adjunct to ASD surgery planning.

Towards 2D/3D Registration of the Preoperative MRI to Intraoperative Fluoroscopic Images for Visualisation of Bone Defects

ABSTRACT Magnetic Resonance Imaging (MRI) is a medical imaging modality that allows for the evaluation of soft-tissue diseases and the assessment of bone quality. Preoperative MRI volumes are used by surgeons to identify defected bones, perform the segmentation of lesions, and generate surgical plans before the surgery. Nevertheless, conventional intraoperative imaging modalities such as fluoroscopy are less sensitive in detecting potential lesions. In this work, we propose a 2D/3D registration pipeline that aims to register preoperative MRI with intraoperative 2D fluoroscopic images. To showcase the feasibility of our approach, we use the core decompression procedure as a surgical example to perform 2D/3D femur registration. The proposed registration pipeline is evaluated using digitally reconstructed radiographs (DRRs) to simulate the intraoperative fluoroscopic images. The resulting transformation from the registration is later used to create overlays of preoperative MRI annotations and planning data to provide intraoperative visual guidance to surgeons. Our results suggest that the proposed registration pipeline is capable of achieving reasonable transformation between MRI and digitally reconstructed fluoroscopic images for intraoperative visualisation applications.

A Novel Cervical Vertebral Bone Quality Score Independently Predicts Cage Subsidence After Anterior Cervical Diskectomy and Fusion.

Surgeons can preoperatively assess bone quality using dual-energy X-ray absorptiometry or computed tomography; however, this is not feasible for all patients. Recently, a MRI-based scoring system was used to evaluate the lumbar spine's vertebral bone quality. To create a similar MRI-based scoring system for the cervical spine (C-VBQ), correlate C-VBQ scores with computed tomography-Hounsfield units (HU), and evaluate the utility of this scoring system to independently predict cage subsidence after single-level anterior cervical diskectomy and fusion (ACDF). Demographic, procedure-related, and radiographic data were collected for patients. Pearson correlation test was used to determine the correlation between C-VBQ and HU. Cage subsidence was defined as ≥3 mm loss of fusion segmental height. A multivariate logistic regression model was built to determine the correlation between potential risk factors for subsidence. Of 59 patients who underwent single-level ACDF, subsidence was found in 17 (28.8%). Mean C-VBQ scores were 2.22 ± 0.36 for no subsidence levels and 2.83 ± 0.38 ( P < .001) for subsidence levels. On multivariate analysis, a higher C-VBQ score was significantly associated with subsidence (odds ratio = 1.85, 95% CI = 1.39-2.46, P < .001) and was the only significant independent predictor of subsidence after ACDF. There was a significant negative correlation between HU and C-VBQ (r 2 = -0.49, P < .001). We found that a higher C-VBQ score was significantly associated with cage subsidence after ACDF. Furthermore, there was a significant negative correlation between C-VBQ and HU. The C-VBQ score may be a valuable tool for assessing preoperative bone quality and independently predicting cage subsidence after ACDF.

Texture Parameters Measured by UHF-MRI and CT Scan Provide Information on Bone Quality in Addition to BMD: A Biomechanical Ex Vivo Study.

The current definition of osteoporosis includes alteration of bone quality. The assessment of bone quality is improved by the development of new texture analysis softwares. Our objectives were to assess if proximal femoral trabecular bone texture measured in Ultra high field (UHF) 7 Tesla MRI and CT scan were related to biomechanical parameters, and if the combination of texture parameters and areal bone mineral density (aBMD) measured by dual-energy X-ray absorptiometry provided a better prediction of femoral failure than aBMD alone. The aBMD of 16 proximal femur ends from eight cadavers were investigated. Nineteen textural parameters were computed in three regions or volumes of interest for each specimen on UHF MRI and CT scan. Then, the corresponding failure load and failure stress were calculated thanks to mechanical compression test. aBMD was not correlated to failure load (R2 = 0.206) and stress (R2 = 0.153). The failure load was significantly correlated with ten parameters in the greater trochanter using UHF MRI, and with one parameter in the neck and the greater trochanter using CT scan. Eight parameters in the greater trochanter using UHF MRI combined with aBMD improved the failure load prediction, and seven parameters improved the failure stress prediction. Our results suggest that textural parameters provide additional information on the fracture risk of the proximal femur when aBMD is not contributive.

Detection of defects in cellular solids using highly nonlinear solitary waves: a numerical study of the proximal femur.

This study investigates the suitability of a relatively new non-destructive evaluation (NDE) technique for the detection of non-visible defects in cellular solids using highly nonlinear solitary waves (HNSWs) in a one-dimensional granular chain. Specifically, the HNSW-based NDE approach is employed to identify the existence of micro-fractures in trabecular bone within the femoral neck (FN) and the intertrochanteric (IT) region of the proximal femur which are fracture-prone sites due to their relatively low bone density, particularly in osteoporosis patients. The availability of a HNSW-based bone quality assessment tool could not only help in early diagnosis of osteoporosis but also affect surgical decisions and improve clinical outcomes in joint replacement surgeries which motivated this study. To obtain a realistic representation of the trabecular microstructure, high-resolution finite-element (FE) models of the FN and the IT region are first constructed using a topology optimization-based bone reconstruction scheme. Then, artificial defects in the form of fractured ligaments are generated in the FN and IT models by selectively disconnecting various struts within the trabecular network. Using the FE models as the inspection medium, hybrid discrete-element/finite-element (DE/FE) simulations are performed to examine the interaction of the HNSWs with the cellular bone samples through two different inspection modes, i.e., inspection via direct contact with the sample and indirect contact through an adequately chosen face sheet inserted between the cellular sample and the granular chain. The delays and amplitudes of the HNSWs are used to estimate the effective elastic moduli of the cellular samples and these estimates were found to be reasonably accurate only in case the face sheet was applied. For the latter case, it was shown that the HNSW-based modulus estimates can be used as indicators for defect detection, allowing to discern between pristine and damaged cellular solids. These results suggest that HNSW-based NDE is a reliable and cost-effective technique for the identification of defects in cellular solids, and is expected to find applications in various fields, such as non-invasive screening of bone diseases and fractures, or damage detection in additively manufactured cellular structures.