Assessment Of Bone Quality Research Articles

The Use of Bone Biomarkers, Imaging Tools, and Genetic Tests in the Diagnosis of Rare Bone Disorders.

Rare bone diseases are clinically and genetically heterogenous. Despite those differences, the underlying pathophysiology is not infrequently different. Several of these diseases are characterized by abnormal bone metabolism and turnover with subsequent abnormalities in markers of bone turnover, rendering them useful adjuncts in the diagnostic process. As most rare bone diseases are inherited, genetic testing for implicated pathogenic variants, where known, is another relevant tool that can aid in diagnosis. While some skeletal disorders can be localized or monostotic, others can involve multiple skeletal sites and warrant imaging tools to localize them and determine the severity of disease and/or presence of complications as well as to assess bone quality and the potential risk of fractures. Rare bone disorders pose a great challenge in their diagnosis, ultimately resulting in delayed diagnosis, higher risk of complications and a poor quality of life in affected individuals. In this review we discuss the biochemical and radiological tools that can be utilized to diagnose selected orphan bone disorders, the clinical utility and limitations of these diagnostic tools, and areas where future research is warranted.

Hounsfield Unit Utilization in Cervical Spine for Bone Quality Assessment: A Scoping Review.

Bone mineral density (BMD) is an essential indicator of bone strength and plays a crucial role in the clinical management of various spinal pathologies. Hounsfield units (HUs) calculated from computed tomography (CT) scans are a well-established, effective, and non-invasive method to determine bone density in the lumbar spine when juxtaposed to dual-energy X-ray absorptiometry (DEXA) scans, the gold standard for assessing trabecular bone density. Only recently have studies begun to investigate and establish HUs as a reliable and valid alternative for bone quality assessment in the cervical spine as well. In addition, multiple recent studies have identified cervical HUs as an accurate predictor of cage subsidence, an undesired complication of anterior cervical discectomy and fusion (ACDF) of anterior cervical corpectomy and fusion (ACCF) procedures. Subsidence involves migration of the spinal fusion cage into vertebral bodies, causing a loss of disk space, negatively altering spine alignment, and possibly necessitating further unwanted surgical intervention. Using the PRISMA-ScR checklist and the registered scoping review protocol (INPLASY2024100126), this review explores the current research on the use of cervical spine HU measurements as both a determinant of BMD and as a prognosticator of postoperative subsidence following cervical spine procedures (i.e., ACDFs and ACCFs) with the aim of improving clinical and surgical outcomes.

Individuals with Heterogenous Trabecular Bone Texture by Clinical MRI have Lower Bone Strength and Stiffness by QCT Based Finite Element Analysis.

Opportunistic screening is essential to improve the identification of individuals with osteoporosis. Our group has utilized image texture features to assess bone quality using clinical MRIs. We have previously demonstrated that greater heterogeneity of MRI texture related to history of fragility fractures, lower bone density, and worse microarchitecture. The present study investigated relationships between MRI-based texture features and biomechanical properties of bone using CT-based finite element analyses (FEA). We hypothesized that individuals with greater texture heterogeneity would have lower stiffness and failure load. Thirty individuals included in this prospective study had CT and MRI of L1 and L2 vertebrae. Using T1-weighted MR images, a gray-level co-occurrence matrix was generated to characterize the distribution and spatial organization of voxelar signal intensities to derive the following texture features: contrast (variability), entropy (disorder), angular second moment (ASM; uniformity), and inverse difference moment (IDM; homogeneity). Features were calculated in five directions relative to the image plane. Whole-bone stiffness and failure load were calculated from phantom-calibrated lumbar QCT. Mean age of subjects was 59 ± 11years (57% female). Individuals with lower vertebral stiffness had greater texture heterogeneity; specifically, higher contrast (r = -0.54, P<.01), higher entropy (r = -0.52, P<.01), lower IDM (r = 0.54, P<.01) and lower ASM (r = 0.51, P<.01). Lower vertebral failure load and lower vBMD were similarly associated with greater texture heterogeneity. Relationships were unchanged when using the average of texture in all directions or the vertical direction in isolation. In summary, individuals with more heterogeneous MRI-based trabecular texture had lower stiffness and failure load by FEA, and lower vBMD by central quantitative CT. These results-the first relating MRI-based texture features and biomechanical properties of bone-provide further support that MRI-based texture measurements can be used to opportunistically detect skeletal fragility.

Comparative analysis of MRI-based VBQ and EBQ score for predicting cage subsidence in PILF surgery

Background contextAs lumbar degenerative diseases become more prevalent in an aging population, there is an increasing demand for surgical interventions, such as posterior lumbar interbody fusion (PLIF). However, cage subsidence (CS), observed in 23.9–54% of cases postoperatively, remains a significant complication. Several factors, including age, bone quality, and endplate damage, contribute to the risk of CS, with bone quality being among the most critical determinants. Although DEXA and QCT are widely employed to assess bone density, their routine use in preoperative evaluations is restricted by cost considerations and radiation exposure. Recent studies suggest that MRI-based vertebral body quality (VBQ) and endplate bone quality (EBQ) score offer a viable, non-invasive alternative for evaluating bone quality; however, there is limited research comparing their predictive value for CS.MethodsIn this retrospective study, 165 patients undergoing single-level PLIF surgery were included. MRI-based VBQ and EBQ score were calculated using T1-weighted images, and preoperative QCT was employed as a clinical standard. Cage subsidence was assessed based on postoperative imaging at 12-month follow-up. Statistical analyses, including t-tests, chi-square tests, and ROC curve analyses, were used to evaluate the predictive accuracy of VBQ and EBQ for CS.ResultsThe study’s findings demonstrated that both VBQ and EBQ scores were significantly correlated with QCT measurements, thereby validating their utility as indicators of bone quality. ROC analysis revealed that VBQ had superior predictive value for CS (AUC = 0.814) compared to EBQ (AUC = 0.719), with both scores demonstrating significant clinical utility in identifying patients at risk for CS. Notably, VBQ exhibited a stronger correlation with preoperative clinical outcomes compared to EBQ, underscoring its greater reliability as a predictor.ConclusionsThis study highlights the effectiveness of MRI-based VBQ and EBQ score as practical, non-invasive tools for assessing bone quality preoperatively, with VBQ demonstrating superior predictive performance for CS risk. The findings underscore the potential of integrating these MRI-based assessments into routine preoperative planning to improve patient outcomes and minimize complications associated with PLIF surgery.

Assessment Of Jaw Bone Quality And Quantity In Edentulous Patients Using Cone Beam Computed Tomography – A Cross-Sectional Study.

Assessment Of Jaw Bone Quality And Quantity In Edentulous Patients Using Cone Beam Computed Tomography – A Cross-Sectional Study.

Assessing bone quality in hounsfield units using computed tomography: what value should be used to classify bone as normal or osteoporotic?

The purpose of this study was to investigate threshold values for classifying bone as normal or osteoporotic based on Computed Tomography (CT) Hounsfield Units (HU) and to determine if clinically applicable values could be derived to aid spine surgeons evaluating bone quality using CT. This literature review was completed using PubMed and Ovid (MedLine), using syntax specific to bone quality and CT. The included articles were original clinical studies assessing bone quality and utilized composite L1-L4 HU values compared against dual-energy X-ray absorptiometry (DEXA) values. Extracted data study descriptors, CT measurement technique, and CT threshold values. CTs were measured from L1-L4 using either axial or sagittal images, and must classify their bone quality findings for any of the following 3 categories: normal, osteopenia, or osteoporosis. This review located 34 studies measuring bone density using CT with threshold values, of which, 10 were included in the final review. Number of patients ranged from 74 to 283 and cohort ages from 20s to 70.6 years. CT threshold values for assessing normal and osteoporotic bone quality ranged from 150 to 179 and 87 to 155, respectively. From combining values across studies, a HU value of ≥ 170 HU was associated with normal bone and ≤ 115 HU with osteoporosis. There is variation in HU values used to differentiate normal from compromised bone quality, even after limiting studies. For patients with HU values between or near 170 or 115 HU, a DEXA scan may be warranted for further evaluation. With ongoing investigation in this area, threshold values for classifying bone quality using CT will be continually refined.

A Comparison of Deep Learning vs. Dental Implantologists in Cone-Beam Computed Tomography-Based Bone Quality Classification.

Bone quality assessment is crucial for pre-surgical implant planning, influencing both implant design and drilling protocol selection. The Lekholm and Zarb (L&Z) classification, which categorizes bone quality into four types based on cortical bone width and trabecular bone density using cone-beam computed tomography (CBCT) data, lacks quantitative guidelines, leading to subjective interpretations. This study aimed to compare the performance of deep learning (DL)-based approaches against human examiners in assessing bone quality, according to the L&Z classification, using CBCT images. A dataset of 1100 CBCT cross-sectional slices was classified into four bone types by two oral and maxillofacial radiologists. Five pre-trained DL models were trained on 1000 images using MATLAB®, with 100 images reserved for testing. Inception-ResNet-v2 achieved the highest accuracy (86.00%) with a learning rate of 0.001. The performance of Inception-ResNet-v2 was then compared to that of 23 residency students and two experienced implantologists. The DL model outperformed human assessors across all parameters, demonstrating excellent precision and recall, with F1-scores exceeding 75%. Notably, residency students and one implantologist struggled to distinguish bone type 2, with low recall rates (48.15% and 40.74%, respectively). In conclusion, the Inception-ResNet-v2 DL model demonstrated superior performance compared to novice implantologists, suggesting its potential as an supplementary tool for cross-sectional bone quality assessment.

Evaluation of black Cumin (Bunium persicum), Ajwain (Carum copticum) and Fenugreek (Trigonella foenum-graecum) dietary supplementation on growth performance, blood metabolites, ileal digestibility, bone strength and in broilers

ABSTRACT This study aimed to evaluate the effects of herbal plants (HP) consisting of black Cumin (Bunium persicum), Ajwain (Carum copticum) and Fenugreek (Trigonella foenum-graecum) on broiler performance and health. A total of 360 broilers were allocated into four groups consisting of control diet (A) or supplemented with a mixture of Ajwain, Fenugreek and black Cumin seeds at the rate of 1.5 (B), 3 (C) and 4.5 g/kg (D). Results showed that feed intake was significantly (P < 0.05) higher in Group-C during the 6th week. Weight gain in Group-C was also significantly (P < 0.05) higher in 6th weeks compared to other groups. FCR was significantly (P < 0.05) improved in Group-C at week 6. The apparent ileal digestibility of crude protein and fat was highest in Group-C, showing significant (P < 0.05) improvements. Blood analysis revealed lower total cholesterol and LDL levels in Group-B and -C, while HDL was significantly (P < 0.05) higher in group-C. Bone quality assessments indicated that the tibiotarsal index was significantly (P < 0.05) higher in Group-C, suggesting enhanced bone strength. In conclusion, dietary inclusion of PFAs, particularly at 3 g/kg, significantly improved growth performance, nutrient digestibility, blood biochemistry and bone quality in broilers.

Impaired Bone Tissue Quality Associated with Inflammation in HIV-Immunological Non-Responders: A Cross-Sectional Analysis.

People with HIV (PWH) with poor immune response despite adequate antiretroviral treatment (ART) are susceptible to non-AIDS-related health issues. This study seeks to evaluate bone quality in Immunological Non-Responders (INRs) in comparison to those with proper immune response (IRs) using in vivo microindentation to quantify bone quality, in addition to conventional bone mineral density (BMD) evaluations. A cross-sectional study was conducted at Hospital del Mar in Barcelona from January 2019 to June 2023. Participants were matched in a 1:2-ratio (INRs:IR) based on age, sex, body mass index (BMI), and ART. Participants underwent bone quality assessment using in vivo microindentation, BMD and analysis of bone turnover and inflammation markers. Statistical analyses involved multivariable regression to adjust for potential confounding variables. A total of 159 PWH were included, 53 INRs and 106 IRs. INRs had worse bone quality, with lower median Bone Material Strength index (BMSi) compared to IRs (79 (76-87) vs. 86 (82-89); p<0.001), and similar BMD. INRs shown increased high-sensitive C-Reactive Protein levels with lower 25-(OH)-Vitamin D3. A significant negative correlation between inflammation and bone quality was found, especially noticeable in INRs. Multivariable linear regression shown that INR status is a major predictor of decreased bone quality, regardless of conventional risk factors. INRs condition is significantly associated with higher inflammatory levels, which may contribute to a deleterious effect on bone quality as measured by in vivo microindentation. Further studies are needed to confirm these results and to focus on non-AIDS comorbidities in this subgroup of PWH.

Simultaneous comparison of three methods for bone quality assessment.

The study aims to investigate the correlations between the T score, Hounsfield units (HU) value, and vertebral bone quality (VBQ) score, and to compare their discrimination capability for patients with osteoporotic vertebral compression fracture (OVCF). One hundred and sixty-three eligible participants were enrolled (49 OVCF group,114 non-OVCF group). The T score, HU value, and VBQ score were collected retrospectively. Then, those three parameters were compared between the OVCF and non-OVCF groups and the correlations among the three were assessed. Finally, the discrimination capability of those parameters was compared by the receiver operating characteristic (ROC) curves. The OVCF group showed a lower T score, lower HU value, and higher VBQ score (all P < 0.001) than the non-OVCF group. Correlations were observed among the T score, HU value, and VBQ score (all P < 0.001, HU VS. mean T score, r = 0.66; HU VS. minimum T score, r = 0.67; VBQ VS. mean/ minimum T score, r=-0.33; VBQ VS. HU, r=-0.45). The HU value indicated the maximum area under curve (AUC), followed by the VBQ score and then the T score. Moreover, the AUC of combining the VBQ score and the HU value was similar to that of the HU value. Both the HU value and the VBQ score had superior discrimination capability for patients with OVCF compared to the T score, especially for the HU value. For patients with routinely performed lumbar MRI or CT scans, the HU value or the VBQ score may provide alternative options for assessing the bone condition.

Canadian adult reference data for body composition, trabecular bone score and advanced hip analysis using DXA

DXA-derived reference data for visceral adipose tissue (VAT) and advanced hip analysis (AHA) parameters spanning the entire adult lifespan are limited. The purpose of this study was to develop age-, site- and sex-specific reference data for dual X-ray absorptiometry (DXA) -derived body composition, trabecular bone score (TBS) and advanced hip analysis (AHA) parameters across the adult lifespan. Adults (N = 908; female: 561 and male: 347) from Calgary and the surrounding area over the age of 20 years participated in this study. Participants received DXA scans of their hip (total hip [TH] and femoral neck [FN]), lumbar spine [LS], forearm [33 % site] and total body (iDXA, GE Lunar, GE Healthcare). Areal bone mineral density (aBMD, g/cm2) was captured at all sites, and body composition variables, including lean mass, fat mass and percent fat, were analyzed from the total body scan. VAT mass was assessed from total body DXA scans. Advanced hip analysis (AHA) was performed on hip scans and trabecular bone score (TBS) on the LS scans to assess bone quality. Site- and sex-specific centile curves and tables were generated using the Generalized Additive Models for Location, Scale, and Shape (GAMLSS) method. Clinicians and researchers can use these Canadian reference data as a tool to assess body composition, TBS and AHA parameters across the adult lifespan.

MRI-based endplate bone quality score independently predicts cage subsidence after anterior cervical corpectomy fusion.

To reduce the amount of radiation that patients receive during surgery, surgeons can evaluate the quality of the bone prior to surgery using computed tomography (CT) or dual-energy X-ray absorptiometry. Recently, lumbar spine vertebral bone quality has been evaluated using an MRI-based scoring system. However, few studies have investigated the connection between cage subsidence in patients following cervical interbody fusion and site-specific MRI bone evaluation. It is unknown how cage subsidence following anterior cervical corpectomy decompression and fusion is related to MRI-based endplate bone quality assessment. To create a similar MRI-based cervical spine scoring system (C-EBQ) and to investigate the predictive value of the MRI cervical endplate bone quality (C-EBQ) score for cage subsidence after ACCF. The patients' demographic, surgical, and radiological data were collected. Cage subsidence was defined as fusion segment height loss ≥ 3mm. Multivariate logistic regression models were developed to determine correlations between potential risk factors and subsidence, and simple linear regression analyses of statistically significant indicators were performed. Among the patients who underwent single-level ACCF, 72 met the requirements for inclusion. The C-VBQ scores also improved from 2.28 ± 0.12, indicating no subsidence, to 3.27 ± 0.35, which indicated subsidence, and the C-EBQ scores improved in both the nonsubsidence group (1.95 ± 0.80) and the subsidence group (2.38 ± 0.54). There was a statistically significant difference (p < 0.05) among the groups. Higher C-EBQ scores were strongly correlated with subsidence in the multivariate analysis (odds ratio [OR] = 17.249, 95% CI = 2.269 to 7.537, P < 0.001), and the C-VBQ score was the major independent predictor of subsidence following ACCF ([OR] = 4.752, 95% CI = 3.824 to 8.781, P < 0.05). The C-EBQ score outperformed the C-VBQ score (75.6%) in terms of predictive accuracy, with a ROC curve indicating an 89.4% score. After ACCF, cage subsidence was strongly correlated with higher C-EBQ scores on preoperative MRI. Assessing C-EBQ before ACCF may be a useful way to estimate the likelihood of postoperative subsidence.

Magnetic Resonance Assessment of Bone Quality in Metabolic Bone Diseases.

Metabolic bone diseases (MBDs) are a diverse group of diseases, affecting the mass or structure of bones and leading to reduced bone quality. Parameters representing different aspects of bone health can be obtained from various magnetic resonance imaging (MRI) methods such as proton MR spectroscopy, as well as chemical shift encoding-based water-fat imaging, that have been frequently applied to study bone marrow in particular. Furthermore, T2* mapping and high-resolution trabecular bone imaging have been implemented to study bone microstructure. In addition, quantitative susceptibility mapping and ultrashort echo time imaging are used for trabecular and cortical bone assessment. This review offers an overview of technical aspects, as well as major clinical applications and derived main findings, for MRI-based assessment of bone quality in MBDs. It focuses on osteoporosis as the most common MBD.

Stretchable Ultrasound Metalens for Biomedical Zoom Imaging and Bone Quality Assessment with Subwavelength Resolution (Small 42/2024)

Stretchable Ultrasound Metalens for Biomedical Zoom Imaging and Bone Quality Assessment with Subwavelength Resolution (Small 42/2024)

Management of Rotator Cuff Tears in Severely Osteoporotic Patients

Management of rotator cuff tears (RCT) in osteoporotic patients presents significant challenges for treating clinicians because of compromised bone quality. We present a case series of 2 patients with RCT and severe osteoporosis highlighting the complexities of operative and nonoperative management and underscoring the importance of preoperative optimization and careful surgical planning in this vulnerable population. Patient 1 experienced initial improvement postarthroscopic RCT repair but required revision surgery because of anchor pullout, with eventual conversion to reverse total shoulder arthroplasty. Patient 2 faced intraoperative challenges because of previously undiagnosed osteoporosis, leading to difficulties in securely placing suture anchors, and was referred to the fracture liaison service (FLS) for osteoporosis management postoperatively. A multifaceted approach integrating preoperative optimization, advanced surgical techniques, and postoperative management is advised to improve operative success. Extensive perioperative bone quality assessments and augmentation strategies are warranted, including medication comanagement through an FLS if available. Detailed surgical planning is crucial, focusing on arthroscopic repair technique while considering various anchor factors to mitigate failure including proper placement, design, and pullout analysis. Intraoperative bone augmentation with materials such as calcium phosphate, magnesium phosphate, and polymethyl methacrylate cements significantly improves anchor fixation strength in osteoporotic bone. Consideration of a transosseous approach and potential for conversion to an open procedure is also an option when necessary. This review highlights the unique challenges and potential options available to treating clinicians when managing RCT in osteoporotic patients. Continued research and refinement of emerging treatment strategies are essential to improve outcomes and quality of life in this patient population.

Magnetic Resonance Imaging-Based Vertebral Bone Quality Score for Prediction of Cage Subsidence and Screw Loosening in Patients Undergoing Degenerative Lumbar Surgery: A Meta-analysis.

Poor bone quality is a risk factor for postoperative complications after degenerative lumbar fusion surgery. The magnetic resonance imaging-based vertebral bone quality (VBQ) score is a good tool for assessing bone quality, and this is the first meta-analysis performed to summarize the predictive value of the VBQ score for cage subsidence and screw loosening in patients undergoing degenerative lumbar surgery. Studies were comprehensively searched in electronic databases. The quality of the studies was assessed. The pooled sensitivity, specificity and summary receiver operating characteristic curve were calculated. Publication bias was assessed and meta-regression was conducted. We ultimately included 9 studies with a total of 1,404 patients with a mean age of 60.4 years and a percentage of females of 57.0%. According to the QUADAS-2 (Quality Assessment of Diagnostic Accuracy Studies 2) tool to assess methodological quality, the quality of the included studies was relatively low and risks of bias might exist. Results showed that a high VBQ was significantly associated with cage subsidence and screw loosening, and risk factor analysis revealed that the merged odds ratio was 5.37 for cage subsidence and 3.87 for screw loosening. With a VBQ cutoff value of 3.34±0.45, the pooled sensitivity and specificity for the diagnosis of postoperative complications were 0.75 and 0.75, respectively, and the area under the curve was 0.82 (95% confidence interval, 0.78-0.85). A high VBQ was associated with a high risk of cage subsidence and screw loosening in patients who underwent degenerative lumbar surgery. The VBQ score could be considered for identifying high-risk patients for further evaluation.

Evaluation of the effect of tartrazine on the offspring rats in an invivo experimental model.

Tartrazine, an azo dye prevalent in pharmaceuticals and food items, was investigated for its impact on fetal development, specifically examining visceral and skeletal abnormalities in rat offspring exposed to daily oral doses throughout pregnancy. Fourteen pregnant rats were randomly assigned to control and tartrazine groups (seven animals each), with tartrazine administered via oral gavage at 7.5 mg/kg throughout gestation. Offspring were categorized by gender for histopathological and genetic analysis of visceral structures. Bone quality and fracture resistance assessments involved micro-CT, Raman spectroscopy, and biomechanical testing. Results highlighted distinct internal organ tissue differences in the tartrazine group, notably increased hemorrhagic and inflammatory cell infiltration, degeneration, and vacuolization compared to controls. Gender-specific alterations in mRNA levels of IL-6, IL-1β, TNF-α, and TRPM2 genes (p < .001) were also noted. Moreover, tartrazine-exposed groups exhibited reduced trabecular thickness, bone volume, and significant alterations in bone matrix composition and quality alongside significant decreases in fracture resistance (p < 0.05). This study concludes that intrauterine exposure to tartrazine can result in adverse impacts on organ and bone development in rat offspring.

Relations between bone density from computed tomography and bone regeneration after reduction mandibuloplasty

BackgroundBone regeneration in the mandibular angle region after reduction mandibuloplasty may compromise the aesthetics of the lower face and thus lead to revision surgery. Bone quality is known to play an important role in osteogenesis. However, no study has evaluated the relationship between mandibular bone quality and bone regeneration volume. MethodsThe bone density of the mandibular angle immediately after surgery (BD) was determined as the grey level in computed tomography (CT) images. Based on the immediate postoperative and long-term follow-up CT images, the volumes of the regenerated angle (VSA) and the regenerated outer cortex (VOC) were measured after model reconstruction, automatic alignment and Boolean operation. Correlation analyses were then performed between VSA and BD, VOC and BD. Results23 patients (46 mandibular angles) were included in this study. The average BD was 907.09 ± 111.89 HU. The mean VSA was 201.66 (131.73–357.24) mm3. Spearman correlation analysis revealed a positive correlation between BD and VSA (r = 0.5449, p < 0.0001). The mean VOC was 236.23 ± 151.35 mm3. Pearson correlation analysis found a negative correlation between BD and VOC (r = -0.3501, p = 0.0171). ConclusionsCT images can provide a quantitative assessment of mandibular bone quality. BD may influence the volumes of bone regeneration in different areas of the mandibular angle portion after reduction mandibuloplasty, in the regenerated angle area positively and in the regenerated outer cortex region negatively. Therefore, slight over-grinding may be a choice to prevent secondary angulation.

Radiofrequency echographic multispectrometry (REMS) in rare bone conditions

In recent years there has been a growing interest in radiofrequency echographic multispectrometry (REMS), an innovative technology, free of ionized radiation, that is capable of providing important information on bone status. In particular, REMS has been shown to measure bone mineral density (BMD) at axial skeletal bones with a precision, repeatability and accuracy not inferior to those of dual-energy X-ray absorptiometry (DXA). Moreover, REMS may be useful in the assessment of impaired bone quality (e.g., in patients with type 2 diabetes mellitus) and to predict fragility fracture risk. Due to these characteristics, REMS could be usefully used in the diagnosis and follow up of rare bone diseases. In 41 adult subjects (mean age 40.5 ± 18.7 years) with osteogenesis imperfecta (OI), BMD values at all skeletal sites, obtained using both DXA and REMS, were significantly lower than in controls. BMD by REMS values were significantly lower in patients with types III and IV versus type I OI, whereas BMD by DXA did not differ significantly between the two groups. REMS has also demonstrated excellent diagnostic accuracy in some patients suffering from McCune-Albright or Ehlers-Danlos syndromes. Furthermore, with REMS it is to obtain the real BMD value in the presence of artifacts, and, being free of ionizing radiation, it could be particularly advantageous in children and in women of childbearing age or during pregnancy and breastfeeding. In conclusion, on the basis of these preliminary data, REMS can be considered a precise and reliable technique for the evaluation and monitoring of bone status in individuals with rare bone diseases. KEY WORDS: Rare bone diseases, bone mineral density (BMD), dual-energy X-ray absorptiometry (DXA), radiofrequency echographic multispectrometry (REMS), osteogenesis imperfecta.

The effect of brace treatment history on bone density in preoperative patients with adolescent idiopathic scoliosis (AIS) assessed by vertebral bone quality (VBQ) score: a retrospective propensity score-matched analysis

IntroductionAdolescent idiopathic scoliosis (AIS), a prevalent condition among teenagers, is often accompanied by osteopenia. However, the impact of brace treatment on bone density in AIS patients remains a matter of debate. The Vertebral bone quality (VBQ) score, derived from MRI signal intensity, has been shown to correlate with bone mineral density (BMD). Yet, no studies to date have drawn comparisons between VBQ scores in preoperative AIS patients who had brace treatment history and those who have not received brace treatment.ObjectiveThis study aims to elucidate the influence of brace treatment on bone density in AIS patients using VBQ score.MethodsA retrospective analysis was conducted on 243 AIS patients, each with Cobb angles ranging from 50–70°, who had undergone preoperative MRI scans. The patients were segregated into two cohorts: those who received brace treatment (n = 174) and those who did not (n = 69). Through propensity score matching, a total of 53 matched pairs were selected for further analysis. VBQ scores were extracted from T1-weighted MRI scans.ResultsPost-matching, no significant baseline discrepancies were observed between the two groups. Interestingly, brace-treated patients exhibited lower average VBQ scores than their non-brace-treated counterparts (2.43 ± 0.11 vs. 2.55 ± 0.12, p < 0.01), suggesting a higher bone density. Furthermore, a negative correlation was observed between VBQ scores and the duration of brace usage (R2 = 0.3853, p < 0.01).ConclusionBrace treatment may potentially enhance bone density in AIS patients by mitigating vertebral fat infiltration. The utilization of VBQ scores presents an alternative, potentially robust approach to assessing bone quality.