Assembly Of Block Copolymers Research Articles

Self-assembled biodegradable block copolymer precursors for the generation of nanoporous poly(trimethylene carbonate) thin films

Even though the domain of nanoporous template manufacturing from self-assembled block copolymers is in full expansion, challenging studies addressing innovative biodegradable block copolymer assemblies are still not reported. Herein, we address the usage of an original biodegradable precursor to prepare nanoporous thin films: the PTMC-b-PDLLA-b-PTMC triblock copolymer. The copolymer is designed to have a favorable interaction parameter for phase-separation, which was confirmed by differential scanning calorimetry by the appearance of two distinctive glass transition temperatures, corresponding to each of the blocks. Thin films are firstly produced by spin-coating and two methods are investigated for achieving organized self-assembly of the system: solvent evaporation and solvent vapor annealing. Well-organized bicontinuous nanoscopic phase-separated morphologies consisting of PTMC and PDLLA domains are achieved under precise solvent vapor annealing conditions for a particular triblock copolymer composition. Triblock copolymer self-assembly is compared to the one occurring in PTMC/PDLLA blends where no ordered phase-separation is observed. Moreover, thin films photo-crosslinking of previously methacrylated PTMC end-blocks, beneficial to the stability and cohesion of the PTMC phase, as well as mechanical strength of the porous matrix, proved to preserve the phase separation. From the optimal oriented block copolymer thin films, selective etching via PDLLA mild hydrolysis resulted in nanoporous PTMC with maintained long-range order and stability. Such approach to generate nanoporous PTMC could have great potential in both biomedical applications and the energy field.

Imaging Block-Selective Copolymer Solvation.

Understanding individual-block solvation in self-assembled block copolymer systems is experimentally difficult, but this solvation underpins the assembly and disassembly observed at the bulk scale. Here, covalently attached viscosity-sensitive molecular rotors for fluorescence lifetime imaging microscopy uncover and quantitatively elucidate previously undisclosed differential block-selective responses toward solvation changes upon addition of DMSO and THF to self-assembled ROMP-based amphiphilic block copolymers. The sensitivity of this method provides unique information on block-selective solvent-triggered assembly and disassembly mechanisms, revealing behaviors invisible to or with superior sensitivity to traditional 1H NMR spectroscopy. These experiments demonstrate an analytical method and provide a granular mechanistic understanding, both suitable for fine tuning block copolymer assembly and disassembly processes.

Assembly of polyelectrolyte star block copolymers at the oil-water interface.

To understand and resolve adsorption, reconfiguration, and equilibrium conformations of charged star copolymers, we carried out an integrated experimental and coarse-grained molecular dynamics simulation study of the assembly process at the oil-water interface. This is important to guide development of novel surfactants or amphiphiles for chemical transformations and separations. The star block copolymer consisted of arms that are comprised of hydrophilic-hydrophobic block copolymers that are covalently tethered via the hydrophobic blocks to one point. The hydrophobic core represents polystyrene (PS) chains, while the hydrophilic corona represents quaternized poly(2-vinylpyridine) (P2VP) chains. The P2VP is modeled to become protonated when in contact with an acidic aqueous phase, thereby massively increasing the hydrophilicity of this block, and changing the nature of the star at the oil-water interface. This results in a configurational change whereby the chains comprising the hydrophilic corona are significantly stretched into the aqueous phase, while the hydrophobic core remains solubilized in the oil phase. In the simulations, we followed the kinetics of the anchoring and assembly of the star block copolymer at the interface, monitoring the lateral assembly, and the subsequent reconfiguration of the star via changes in the interfacial tension that varies as the degree-of-protonation increases. At low fractions of protonation, the arm cannot fully partition into the aqueous side of the interface and instead interacts with other arms in the oil phase forming a network near the interface. These insights were used to interpret the non-monotonic dependence of pH with the asymptotic interfacial tension from pendant drop tensiometry experiments and spectral signatures of aromatic stretches seen in vibrational sum frequency generation (SFG) spectroscopy. We describe the relationship of interfacial tension to the star assembly via the Frumkin isotherm, which phenomenologically describes anti-cooperativity in adsorbing stars to the interface due to crowding. Although our model explicitly considers long-range electrostatics, the contribution of electrostatics to interfacial tension is small and brought about by strong counterion condensation at the interface. These results provide key insights into resolving the adsorption, reconfiguration, and equilibrium conformations of charged star block copolymers as surfactants.

Hierarchical 2D-1D micelles self-assembled from the heterogeneous seeded-growth of rod-coil block copolymers.

Precise control of size and dimension is the key to constructing complex hierarchical nanostructures, particularly multi-dimensional hybrid nanoassemblies. Herein, we conducted Brownian dynamics simulations to examine the seeded-growth of rod-coil block copolymer assemblies and discovered that 2D-1D (disk-cylinder) hybrid micelles could be formed via liquid-crystallization-driven self-assembly (LCDSA). 2D nanodisk micelles with smectic-like LC cores served as seeds. After adding rod-coil block copolymers into the seed solution, the copolymers incorporated onto the 2D seed edges to generate junction points. Several cylindrical arms were formed from the elongation of junction points, resulting in 2D-1D multi-dimensional hybrid micelles. The structural transition of the micelle core from smectic-like (disk) to cholesteric-like (cylindrical arms) LC packing manners benefit from the fluidity of LC. Such a seeded-growth behavior simultaneously exhibits the features of heterogeneous nucleation and homogenous epitaxy growth. Intriguingly, the arms generate in sequence, and its junction position is in the para-position first, followed by ortho-position or meta-position, resembling the difference in the substituent activities on the benzene ring. These theoretical findings are consistent with experimental results, and provide explanations to some unaddressed issues in experiments. The obtained results also reveal that the hybrid micelles are a good stabilizer due to their high surface area and distinctive suspension behaviors.

Tailored Polypeptide Star Copolymers for 3D Printing of Bacterial Composites Via Direct Ink Writing.

Hydrogels hold much promise for 3D printing of functional living materials; however, challenges remain in tailoring mechanical robustness as well as biological performance. In addressing this challenge, the modular synthesis of functional hydrogels from 3-arm diblock copolypeptide stars composed of an inner poly(l-glutamate) domain and outer poly(l-tyrosine) or poly(l-valine) blocks is described. Physical crosslinking due to ß-sheet assembly of these star block copolymers gives mechanical stability during extrusion printing and the selective incorporation of methacrylate units allows for subsequent photocrosslinking to occur under biocompatible conditions. This permits direct ink writing (DIW) printing of bacteria-based mixtures leading to 3D objects with high fidelity and excellent bacterial viability. The tunable stiffness of different copolypeptide networks enables control over proliferation and colony formation for embedded Escherichia coli bacteria as demonstrated via isopropyl ß-d-1-thiogalactopyranoside (IPTG) induction of green fluorescent protein (GFP) expression. This translation of molecular structure to network properties highlights the versatility of these polypeptide hydrogel systems with the combination of writable structures and biological activity illustrating the future potential of these 3D-printed biocomposites.

Precise and Controllable Assembly of Block Copolymers†

Comprehensive SummaryWith the development of nanotechnology, the precise synthesis of nanoparticles with nicely‐defined dimensions and structures has been well‐developed, and the functionalization and subsequent applications of the resultant nanostructures are becoming increasingly important. Comparing to inorganic nanoparticles, the nanostructures based on soft matters, especially block copolymer assemblies, are much lower in cost, easier to fabricate and richer in morphology. However, the dimensional control over the block copolymer assemblies is not as easy. Only in recent decade, with the discovery of living Crystallization‐Driven Self‐Assembly (CDSA) by Manners and Winnik, researchers become able to precisely tune the sizes of block copolymer assemblies in a relatively wide range. This discovery has inspired tremendous research effort in the self‐assembly field, and considerable progress has been made recently. This review summarizes the main progress in the precise and controllable self‐assembly field in the past five years, and is mostly focused on four aspects, including in‐depth understanding of the assembly methods, extension of this method to two‐dimensional nanostructures, utilization of this method to fabricate hierarchical structures, and the potential applications of these well‐defined nanostructures. We hope not only to make a periodic systematic summary of previous studies, but also to provide some useful thinking for the future development of this field.

A Dual-Kinetic Control Strategy for Designing Nano-Metamaterials: Novel Class of Metamaterials with Both Characteristic and Whole Sizes of Nanoscale.

Increasingly intricate in their multilevel multiscale microarchitecture, metamaterials with unique physical properties are challenging the inherent constraints of natural materials. Their applicability in the nanomedicine field still suffers because nanomedicine requires a maximum size of tens to hundreds of nanometers; however, this size scale has not been achieved in metamaterials. Therefore, "nano-metamaterials," a novel class of metamaterials, are introduced, which are rationally designed materials with multilevel microarchitectures and both characteristic sizes and whole sizes at the nanoscale, investing in themselves remarkably unique and significantly enhanced material properties as compared with conventional nanomaterials. Microarchitectural regulation through conventional thermodynamic strategy is limited since the thermodynamic process relies on the frequency-dependent effective temperature, Teff (ω), which limits the architectural regulation freedom degree. Here, a novel dual-kinetic control strategy is designed to fabricate nano-metamaterials by freezing a high-free energy state in a Teff (ω)-constant system, where two independent dynamic processes, non-solvent induced block copolymer (BCP) self-assembly and osmotically driven self-emulsification, are regulated simultaneously. Fe3+ -"onion-like core@porous corona" (Fe3+ -OCPCs) nanoparticles (the products) have not only architectural complexity, porous corona and an onion-like core but also compositional complexity, Fe3+ chelating BCP assemblies. Furthermore, by using Fe3+ -OCPCs as a model material, a microstructure-biological performance relationship is manifested in nano-metamaterials.

On the assembly of zwitterionic block copolymers with phospholipids

Materials containing zwitterionic polymers are interesting candidates for diverse applications due to their versatile properties. The assembly of the amphiphilic block copolymer poly(cholesteryl methacrylate)-block-poly(2-methacryloyloxyethyl phosphorylcholine) with three different phospholipids (1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), 1,2-dioleoyl-sn-glycero-3-phospho-l-serine (DOPS) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE)) into small and giant vesicles is reported focusing on their morphology, size, and membrane properties. Giant hybrid vesicles were obtained for all types of lipids, but DOPC was more suitable to assemble small hybrid vesicles without a large fraction of hybrid micelles present. Further, the permeability of the small vesicle membranes towards 5(6)-carboxyfluorescein is very similar to comparable sized liposomes. In contrast, the permeability of the giant hybrid vesicle membranes towards 5(6)-carboxy-X-rhodamine is higher compared to only cholesterol-containing lipid giant vesicles. DOPS-containing vesicles showed pH-dependent morphology changes. Hybrid vesicles containing DOPS and DOPE in addition to the block copolymer have the highest association with HepG2 cells. In contrast, only DOPC-containing hybrid vesicles can be incorporated into alginate beads. Taken together, using these block copolymer with a zwitterionic hydrophilic extension of the chosen architecture offers fundamental insight into the possibility to assemble hybrid vesicles and their potential in bottom-up synthetic biology.

(Invited) ALD-Based Infiltration and Growth of Inorganic Materials in Polymers

Sequential infiltration synthesis (SIS) has emerged in the past decade as a powerful technique for growth of inorganic materials within polymers through atomic layer deposition (ALD) chemistry. In SIS, ALD precursors diffuse into the polymer and interact with it, leading to inorganic materials growth within the polymer’s free volume. If desired, the polymer can later be removed, yielding polymer-templated inorganic structures. Combining SIS with self-assembled block copolymer (BCP) patterns results in selective growth of inorganic materials within the polar domains of the BCP, making it an attractive method for directed templating of inorganic nanostructures. Thus, SIS opens a pathway for exploiting ALD precision and rich materials library in new 3D morphologies, defined by the polymer.To build SIS design rules and expand SIS’ possibilities, we probed SIS growth and evolution at the atomic scale and explored the role of reversible polymer-precursor interactions in SIS growth through a plethora of methods: in-situ growth analysis (microgravimetry and FTIR), ex-situ high-resolution electron microscopy and extended X-ray absorption fine structure (EXAFS), and density functional theory (DFT) calculations. This knowledge was then applied in fabrication by design of metal oxide fibers, porous particles, and membranes.We fabricated Al2O3 and ZnO nanofibers, nanobelts, and core-shell fibers using designed growth profiles within electrospun polymer fibers. By controlling the organometallic precursors’ diffusion time, simultaneous but spatially controlled growth of Al2O3 and ZnO within the fibers was achieved, leading to the formation of metal oxide core-shell fibers. Self-assembled BCP particles were used to template porous metal oxide particles by selective growth of Al2O3 in the major block of the self-assembled structure. The uniform BCP assembly led to uniporous pores in the metal oxide particles. Finally, we utilized SIS and ALD within and onto BCP membranes for exceptional pore size control and pores’ surface engineering, yielding highly selective filtration membranes.

Solvent Controls Nanoparticle Size during Nanoprecipitation by Limiting Block Copolymer Assembly.

Control of the properties of nanoparticles (NPs), including size, is critical for their application in biomedicine and engineering. Polymeric NPs are commonly produced by nanoprecipitation, where a solvent containing a block copolymer is mixed rapidly with a nonsolvent, such as water. Empirical evidence suggests that the choice of solvent influences NP size; yet, the specific mechanism remains unclear. Here, we show that solvent controls NP size by limiting block copolymer assembly. In the initial stages of mixing, polymers assemble into dynamic aggregates that grow via polymer exchange. At later stages of mixing, further growth is prevented beyond a solvent-specific water fraction. Thus, the solvent sets NP size by controlling the extent of dynamic growth up to growth arrest. An a priori model based on spinodal decomposition corroborates our proposed mechanism, explaining how size scales with the solvent-dependent critical water fraction of growth arrest and enabling more efficient NP engineering.

DNA Sequence and Length Dictate the Assembly of Nucleic Acid Block Copolymers.

The self-assembly of block copolymers is often rationalized by structure and microphase separation; pathways that diverge from this parameter space may provide new mechanisms of polymer assembly. Here, we show that the sequence and length of single-stranded DNA directly influence the self-assembly of sequence-defined DNA block copolymers. While increasing the length of DNA led to predictable changes in self-assembly, changing only the sequence of DNA produced three distinct structures: spherical micelles (spherical nucleic acids, SNAs) from flexible poly(thymine) DNA, fibers from semirigid mixed-sequence DNA, and networked superstructures from rigid poly(adenine) DNA. The secondary structure of poly(adenine) DNA strands drives a temperature-dependent polymerization and assembly mechanism: copolymers stored in an SNA reservoir form fibers after thermal activation, which then aggregate upon cooling to form interwoven networks. DNA is often used as a programming code that aids in nanostructure addressability and function. Here, we show that the inherent physical and chemical properties of single-stranded DNA sequences also make them an ideal material to direct self-assembled morphologies and select for new methods of supramolecular polymerization.

Confinement Assembly of Terpolymer‐Based Janus Nanoparticles

While the confinement assembly of block copolymers into functional microparticles has been extensively studied, little is known about the behavior of Janus nanoparticles (JNPs) in spherical confinement. Here, the confinement self-assembly of JNPs in drying emulsion droplets is investigated and their behavior compared to their ABC triblock terpolymer precursors. Emulsions of both materials are prepared using Shirasu Porous Glass membranes leading to narrow size distributions of the microparticles with average hydrodynamic radii in the range of Rh =250-500nm (depending on the membrane pore radius, Rpore ). The internal structure of the microparticles is verified with transmission electron microscopy (TEM) on ultrathin cross sections and compared to the corresponding bulk morphologies. While the confinement assembly of terpolymers results in microparticles with ordered inner morphologies, order for JNPs diminishes when the Janus balance deviates from parity.

Structure Regulation of Block Copolymer Assemblies in Emulsion Droplets by Adding a Selective Solvent

Generally, nanostructured polymer particles are prepared by 3D confined self-assembly (3D-CSA) of block copolymers (BCPs), while micelles are obtained through self-assembly of BCPs in dilute solutions. Herein, a facile yet robust strategy is developed to regulate the assembled structures of BCP, poly(styrene-block-4-vinylpyridine) (PS-b-P4VP), from nanostructured particles to micelles. The assemblies are prepared by an emulsion-solvent diffusion-induced self-assembly route, which is conducted by dialysis. A key feature of this strategy is that a P4VP-selective solvent (e.g., ethanol) is added to the dialysate to tune the interfacial behavior of the droplets and assembled structures of PS-b-P4VP. The authors' results reveal that in the presence of slight ethanol, the surface and internal structural transitions of nanostructured particles are caused by changes in the interfacial selectivity and packing parameter. Interestingly, interfacial instability, which results in the formation of micelles, is observed when the dialysate contains 50vol% ethanol or more. The reason can be ascribed to the decreased interface tension, which is induced by the increase in ethanol and enhanced solubility of P4VP. This facile strategy provides a new opportunity to bridge the gap between traditional 3D-CSA and solution self-assembly of BCPs, offering a promising route to engineer morphologies and nanostructures of polymeric assemblies.

Single crystals and two‐dimensional crystalline assemblies of block copolymers

AbstractBlock copolymer single crystals (BCPSCs) have attracted widespread attentions due to their unique two‐dimensional (2D) structure, good controllability, and great potential applications in recent years. In this paper, the morphology, surface structure of BCPSCs and the related influencing factors are reviewed. We also summarize the studies of 2D crystalline assemblies of block copolymers (BCPs) driven by crystallization and intermolecular π–π interaction. Moreover, the functionalization and properties of BCPSCs and 2D crystalline assemblies of BCPs are introduced. Finally, we put forward some unsolved problems in this field.

Tunable Aggregation-Induced Emission Fluorophore with the Assistance of the Self-Assembly of Block Copolymers by Controlling the Morphology and Secondary Conformation for Bioimaging.

Aggregation-induced emission (AIE) luminogens with highly tunable properties show great potential for many applications. In this study, we synthesized a new family of AIE-type poly(ethylene glycol)-block-poly(9-anthrylmethyl lysine) (PEG-b-PLys-An) diblock copolymers by taking advantage of amphiphilic self-assembly and rigid helical backbones. These copolymers can self-assemble into various assemblies through nanoprecipitation methods. The micelles using N,N-dimethylformamide (DMF) as a cosolvent present brighter fluorescence than the vesicles prepared from tetrahydrofuran (THF). We demonstrate that the decreased solubility of copolymers in DMF results in the formation of more compact micelles with more excimer formation during the self-assembly process, while better solvent THF favors the formation of vesicles with stretched core chains. In addition, the secondary conformation of the polypeptide block shows pronounced effects on the fluorescence property. We further show the internalization of the assemblies using two types of cells by cellular uptake experiments. By the delicate design of the block copolymer, we successfully prepare the morphology- and conformation-dependent AIE materials for potential biomedical applications.

Exploring the topological effect of linear and cyclic macroCTAs during polymerization-induced self-assembly (PISA)

Polymerization-induced self-assembly (PISA) is a robust strategy for the syntheses of block copolymer nano-objects with various morphologies. Although PISA has been extensively studied, the use of cyclic macromolecular chain transfer agents (macroCTAs) as the hydrophilic block has not been reported. We explored the effects of macroCTA topology on the polymerization kinetics and morphologies of block copolymer assemblies during reversible addition-fragmentation chain transfer (RAFT) dispersion polymerization. To this end, linear and cyclic poly (ethylene oxide) (PEO) with 4-(4-cyanopentanoic acid) dithiobenzoate (CPADB) groups were synthesized and used as CTAs to mediate the RAFT polymerization of benzyl methacrylate (BzMA) and 2,3,4,5,6-pentafluorostyrene (PFSt) under PISA formulation. Interestingly, the nucleation period of the linear PEO is slightly shorter than that of its cyclic analog, and the cyclic hydrophilic segment leads to a delayed morphological transition during PISA.

Morphology and Degradation of Multicompartment Microparticles Based on Semi-Crystalline Polystyrene-block-Polybutadiene-block-Poly(L-lactide) Triblock Terpolymers.

The confinement assembly of block copolymers shows great potential regarding the formation of functional microparticles with compartmentalized structure. Although a large variety of block chemistries have already been used, less is known about microdomain degradation, which could lead to mesoporous microparticles with particularly complex morphologies for ABC triblock terpolymers. Here, we report on the formation of triblock terpolymer-based, multicompartment microparticles (MMs) and the selective degradation of domains into mesoporous microparticles. A series of polystyrene-block-polybutadiene-block-poly(L-lactide) (PS-b-PB-b-PLLA, SBL) triblock terpolymers was synthesized by a combination of anionic vinyl and ring-opening polymerization, which were transformed into microparticles through evaporation-induced confinement assembly. Despite different block compositions and the presence of a crystallizable PLLA block, we mainly identified hexagonally packed cylinders with a PLLA core and PB shell embedded in a PS matrix. Emulsions were prepared with Shirasu Porous Glass (SPG) membranes leading to a narrow size distribution of the microparticles and control of the average particle diameter, d ≈ 0.4 µm–1.8 µm. The core–shell cylinders lie parallel to the surface for particle diameters d < 0.5 µm and progressively more perpendicular for larger particles d > 0.8 µm as verified with scanning and transmission electron microscopy and particle cross-sections. Finally, the selective degradation of the PLLA cylinders under basic conditions resulted in mesoporous microparticles with a pronounced surface roughness.

Modulation of Double Zwitterionic Block Copolymer Aggregates by Zwitterion-Specific Interactions.

Transformable double hydrophilic block copolymer assemblies are valid as a biocompatible smart macromolecular system. The molecular mechanisms in the spontaneous assembly of double zwitterionic diblock copolymers composed of a poly(carboxybetaine methacrylate) (PCB2) and a poly(sulfobetaine methacrylate) (PSB4) chains (PCB2-b-PSB4) were investigated by the modulation of the aggregates in response to nondetergent zwitterions. The PCB2-b-PSB4 diblock copolymers with a high degree of polymerization PSB4 block produced aggregates in salt-free water through "zwitterion-specific" interactions. The PCB2-b-PSB4 aggregates were dissociated by the addition of nondetergent sulfobetaine (SB4) and carboxybetaine (CB2) molecules, while the aggregates showed different aggregation modulation processes for SB4 and CB2. Zwitterions with different charged groups from SB4 and CB2, glycine and taurine, hardly disrupted the PCB2-b-PSB4 aggregates. The PCB2-b-PSB4 aggregate modulation efficiency of SBs associated with the intercharge hydrocarbon spacer length (CSL) rather than the symmetry with the SB in the PSB chain. These zwitterion-specific modulation behaviors were rationalized based on the nature of zwitterions including partial charge density, dipole moment, and hydrophobic interactions depending on the charged groups and CSL.

Self‐assembly of block copolymers for biological applications

AbstractSelf‐assembly of block copolymers (BCPs) has garnered much attention over the past several decades owing to an array of intriguing properties. In this perspective, recent advances in self‐assembly and applications of BCPs with different architectures are presented. First, the self‐assembly mechanism of BCPs and the general criteria to evaluate the assembled morphologies are introduced. Subsequently, the self‐assembly of linear, star‐like and bottlebrush‐like BCPs is discussed. In particular, polymerization‐induced self‐assembly for large‐scale preparation is highlighted. Afterwards, a rich diversity of applications of self‐assembled BCPs in drug delivery, bioimaging, molecular recognition and photothermal therapy are outlined. Finally, an outlook on larger‐scale production and implementation of self‐assembled BCPs for biological applications is noted. © 2021 Society of Industrial Chemistry.

Reversible CO2-, Photo- and Thermo- Triple Responsive Supramolecular Chirality of Azo-containing Block Copolymer Assemblies Prepared by Polymerization-induced Chiral Self-assembly

Reversible CO2-, Photo- and Thermo- Triple Responsive Supramolecular Chirality of Azo-containing Block Copolymer Assemblies Prepared by Polymerization-induced Chiral Self-assembly