Aryl Reagents Research Articles

Rh(III)-Catalyzed N-Nitroso Directed C-H Arylation for Facile Construction of Diverse N-Hetero Biaryl Compounds.

A Rh(III)-catalyzed C-H arylation reaction of N-nitrosoanilines has been developed in which arylboronic acids were used as arylation reagents. It provides an efficient strategy for the synthesis of N-nitroso-[1,1'-biphenyl]-2-amine, which is an important starting material for the synthesis of N-hetero biaryl compounds, such as 2-amine-1,1'-biphenyl, carbazole, phenanthridone. This protocol can be applied to various N-alkyl substituted N-nitrosoanilines and N-nitrosoanilines with substituents on the phenyl ring. Arylboronic acids with both electron-donating and electron-withdrawing groups are tolerated.

Thianthrenation-Enabled α-Arylation of Carbonyl Compounds with Arenes.

The Pd-catalyzed α-arylation of carbonyl compounds with simple arenes enabled by site-selective thianthrenation has been demonstrated. This one-pot process using thianthrenium salts as the traceless arylating reagents features mild conditions and a broad substrate scope. In addition, this protocol could also tolerate the heterocyclic carbonyl compounds and complex bioactive molecules, which is appealing for medicinal chemistry.

Pd-Catalyzed C(sp3)-H Biarylation via Transient Directing Group Strategy.

Here, we describe a highly selective Pd-catalyzed C(sp3)-H biarylation of 2-methylbenzaldehydes using cyclic diaryliodonium salts as arylation reagents. The key strategy is the employment of tert-leucine as a bidentate transient directing group for the proximity-driven metalation to achieve reactivity and selectivity in C-H activation. Various functionalized biaryls bearing both aldehyde and iodine functional groups were prepared successfully, which could be further transformed into a wide range of compounds with potential applications in pharmaceutical chemistry and materials science.

Synthesis of Highly Enantioenriched Sulfonimidoyl Fluorides and Sulfonimidamides by Stereospecific Sulfur-Fluorine Exchange (SuFEx) Reaction.

Sulfonimidamides present exciting opportunities as chiral isosteres of sulfonamides, with potential for additional directional interactions. Here, we present the first modular enantioselective synthesis of sulfonimidamides, including the first stereoselective synthesis of enantioenriched sulfonimidoyl fluorides, and studies on their reactivity. A new route to sulfonimidoyl fluorides is presented from solid bench‐stable, N‐Boc‐sulfinamide (Boc=tert‐butyloxycarbonyl) salt building blocks. Enantioenriched arylsulfonimidoyl fluorides are shown to be readily racemised by fluoride ions. Conditions are developed, which trap fluoride and enable the stereospecific reaction of sulfonimidoyl fluorides with primary and secondary amines (100 % es, es=enantiospecificity) generating sulfonimidamides with up to 99 % ee. Aryl and alkyl sulfonimidoyl fluoride reagents are suitable for mild late stage functionalisation reactions, exemplified by coupling with a selection of complex amines in marketed drugs.

Direct Construction of NOBINsvia Domino Arylation and Sigmatropic Rearrangement Reactions

Summary of main observation and conclusionPrivileged 2‐amino‐2’‐hydroxy‐1,1’‐binaphthyl (NOBIN) frameworks were constructed through a novel domino arylation of naphthylhydroxylamines with diarylhalonium salts and sigmatropic rearrangement in a transition metal‐free fashion. This protocol bears broad substrate generality and proceeds under mild reaction conditions, affording diversified NOBINs in high efficiency with absolute regiocontrol during the rearrangement process. Optically active product was accessible by chiral N‐heterocyclic carbene‐catalyzed kinetic resolution in one pot or diastereoselective [3,3]‐rearrangement guided by a removable chiral auxiliary. Remarkably, diarylchloronium and diarylbrominium salts have been employed as arylation reagents for the first time in assembling such representative biaryl frameworks.

Harnessing Sulfinyl Nitrenes: A Unified One-Pot Synthesis of Sulfoximines and Sulfonimidamides.

Sulfoximines and sulfonimidamides are promising compounds for medicinal and agrochemistry. As monoaza analogues of sulfones and sulfonamides, respectively, they combine good physicochemical properties, high stability, and the ability to build complexity from a three-dimensional core. However, a lack of quick and efficient methods to prepare these compounds has hindered their uptake in molecule discovery programmes. Herein, we describe a unified, one-pot approach to both sulfoximines and sulfonimidamides, which exploits the high electrophilicity of sulfinyl nitrenes. We generate these rare reactive intermediates from a novel sulfinylhydroxylamine (R–O–N=S=O) reagent through an N–O bond fragmentation process. Combining sulfinyl nitrenes with carbon and nitrogen nucleophiles enables the synthesis of sulfoximines and sulfonimidamides in a reaction time of just 15 min. Alkyl, (hetero)aryl, and alkenyl organometallic reagents can all be used as the first or second component in the reaction, while primary and secondary amines, and anilines, all react with high efficiency as the second nucleophile. The tolerance of the reaction to steric and electronic factors has allowed for the synthesis of the most diverse set of sulfoximines and sulfonimidamides yet described. Experimental and computational investigations support the intermediacy of sulfinyl nitrenes, with nitrene formation proceeding via a transient triplet intermediate before reaching a planar singlet species.

Anti-Hydroarylation of Activated Internal Alkynes: Merging Pd and Energy Transfer Catalysis.

A general catalytic anti-hydroarylation of electron-deficient internal alkynes compatible with both electron-poor and electron-rich aryl reagents is reported. This selectivity is achieved through a sequential syn-carbopalladation of the alkyne by an Ar-Pd species, followed by a tandem, Ir-photocatalyzed, counter-thermodynamic E → Z isomerization. The use of ortho-substituted boronic acids enables direct access to pharmaceutically relevant heterocyclic cores via a cascade process. Mechanistic insight into the involvement of Ar-Pd versus Pd-H as an active species is provided.

One‐Pot Successive Turbo Grignard Reactions for the Facile Synthesis of α‐Aryl‐α‐Trifluoromethyl Alcohols

A novel straightforward one‐pot methodology for two successive turbo Grignard reagent (iPrMgCl·LiCl) reactions, was developed for a facile synthesis of α‐aryl‐α‐trifluoromethyl alcohols, motifs of value in pharmaceutical chemistry. The method displayed broad functional group tolerance, including reducible groups. Dual roles of iPrMgCl·LiCl were exploited in the tandem reaction with commercially available iodoarenes or iodoheteroarenes and 2,2,2‐trifluoroethyl trifluoroacetate. The process encompasses three successive reactions in a one‐pot process: the iPrMgCl·LiCl‐mediated iodine/magnesium‐exchange reaction of iodoarenes or iodoheteroarenes; nucleophilic addition of various generated aryl or heteroarylmagnesium reagents to 2,2,2‐trifluoroethyl trifluoroacetate; and the reduction of in‐situ generated aryl trifluoromethyl ketones with iPrMgCl·LiCl, to produce the corresponding α‐aryl or α‐heteroaryl‐α‐trifluoromethyl alcohols bearing various substituents, including reducible functional groups in good to excellent yields.

Mechanically Induced N‐arylation of Amines with Diaryliodonium Salts

AbstractDiaryliodonium salts are stable and less toxic arylation reagents widely used in organic chemistry. Various N‐arylated compounds have been prepared with diaryliodonium salts in the past decades. Taking the advantages of their superiority, herein, we have developed two novel arylation methods of amines with diaryliodonium salts by ball milling for the preparation of diarylamines. The protocols are highlighted by operational simplicity, mild conditions and broad functional group tolerance. It is found that the reaction undergoes the cross‐coupling pathway as amines milled with diaryliodonium salts in the presence of catalyst CuI. The ball milled organic reaction of amines by liquid‐assisted grinding in the absence of transition metals follows a radical mechanism.

Visible-Light-Promoted C2 Selective Arylation of Quinoline and Pyridine N-Oxides with Diaryliodonium Tetrafluoroborate.

A protocol of visible-light-promoted C2 selective arylation of quinoline and pyridine N-oxides, with diaryliodonium tetrafluoroborate as an arylation reagent, using eosin Y as a photocatalyst for the construction of N-heterobiaryls was presented. This methodology provided an efficient way for the synthesis of 2-aryl-substituted quinoline and pyridine N-oxides. This strategy has the following advantages: specific regioselectivity, simple operation, good functional group tolerance, and high to moderate yields under mild conditions.

Comprehension of the α-Arylation of Nitroalkanes

Background: α-Aryl substituted nitroalkanes are important synthetic intermediates for the preparation of pharmaceutical molecules, natural products, and functional materials. Due to their scare existence in Nature, synthesis of these compounds has attracted the attention of synthetic and medicinal chemists, rendering α-arylation of nitroalkanes of an important research topic. This article summarizes the important advances of α- arylation of nitroalkanes since 1963. Results: After a brief introduction of the synthetic application and the reactions of nitroalkanes, this article reviewed the synthetic methods for the α-arylated aliphatic nitro compound. The amount of research on α-arylation of nitroalkanes using various arylation reagents and the discovery of elegant synthetic approaches towards such skeleton have been discussed. This review described these advances in two sections. One is the arylation of non-activated nitroalkanes, with an emphasis on the application of diverse arylation reagents; the other focuses on the arylation of activated nitroalkanes, including dinitroalkanes, trinitroalkanes, α-nitrosulfones, α-nitroesters, α-nitrotoluenes, and α-nitroketones. The synthetic application of these methods has also been presented in some cases. Conclusion: In this review, we described the progress of α-arylation of nitroalkanes. Although the immense amount of research on α-arylation of aliphatic nitro compounds has been achieved, many potential issues still need to be addressed, especially the asymmetric transformation and its wide application in organic synthesis.

Mechanism and chemoselectivity origins of bioconjugation of cysteine with Au(iii)-aryl reagents

Organometallic reagents, in particular Pd(ii)- and Au(iii)-aryl reagents, have recently emerged as an efficient tool for bioconjugation. However, the detailed mechanism and origins of chemoselectivity are not well established, but are highly desirable from both synthetic and theoretical viewpoints. In this paper, we report that a computational study dealing with the reaction mechanism of Au(iii)-aryl reagents enabled selective cysteine S-arylation of peptides and proteins developed by Maynard and Spokoyny et al. (J. Am. Chem. Soc., 2018, 140, 7065). Our calculation results suggest that the reaction proceeds by a cationic Au(iii)/Au(i) pathway involving elementary steps of (a) binding of the SH residue to the Au(iii) center, (b) deprotonation of the SH residue, and (c) reductive elimination from a key four-coordinate square planar (L)Au(iii)(thiolate)(Ar) (L is a P,N-bidentate ligand) intermediate. Furthermore, the chemoselectivity of S-arylation against arylation of other nucleophilic residues can be rationalized in terms of energy demand of the three elementary steps. For instance, amine N-arylation is more difficult than S-arylation due majorly to the much higher energy required for deprotonation of much more basic N-H bonds than for deprotonation of weakly acidic S-H bonds. Carboxylate O-arylation is challenging due to the high activation energy of reductive elimination from LAu(iii)(carboxylate)(aryl), because carboxylate is much less nucleophilic than thiolate. These results thus identify acidity and nucleophilicity of the residue as two inherent factors for bioconjugation. This study provides a useful and convenient approach for predicting and rationalizing the feasibility and chemoselectivity of related bioconjugation reactions.

N-Arylations of trifluoromethylated N-acylhydrazones with diaryliodonium salts as arylation reagents.

A novel and efficient N-arylation of trifluoromethylated N-acylhydrazones is described by using diaryliodonium salts as arylation reagents in the presence of copper salts. A wide variety of N-aryl acylhydrazones are obtained with good to excellent yields under mild reaction conditions.

Chemoselective metal-free indole arylation with cyclohexanones

Elemental sulfur- and iodine reagent-mediated indole C3 arylations have been developed with cyclohexanones as the arylating reagent.

Palladium-catalyzed direct C2-arylation of azoles with aromatic triazenes.

A highly efficient palladium-catalyzed arylation of azoles at the C2-position using 1-aryltriazenes as aryl reagents was developed. Azoles including oxazoles, thiazoles, imidazoles, 1,3,4-oxadiazoles, and oxazolines could react with 1-aryltriazenes smoothly to generate the corresponding products in good to excellent yields, and various substitution patterns were tolerated toward the reaction.

Pot-economic synthesis of diarylpyrazoles and pyrimidines involving Pd-catalyzed cross-coupling of 3-trifloxychromone and triarylbismuth

The present study reveals the formation of 3,4-diarylpyrazole and 4,5-diarylpyrimidine in one-pot operation starting from 3-trifloxychromone and triarylbismuth. The complete process encompasses two steps in the one-pot operation. The first step leads to the formation of isoflavone via cross-coupling reaction of 3-trifloxychromone and triarylbismuth as a threefold arylating reagent. These isoflavones were further converted into 3,4-diarylpyrazole and 4,5-diarylpyrimidine using hydrazine hydrate and guanidinium chloride in the successive step in the same pot. Interestingly the formation of 3,4-diarylpyrazole was achieved in the shortest reaction time i.e., 30 min that too at room temperature. Overall the developed methodology provides easy access to the medicinally important diarylpyrazole and pyrimidine moiety in one-pot operation and in short reaction time. Synopsis The work presented here describes the novel methodology for the formation of medicinally important heterocycles 3,4-diarylpyrazole and 4,5-diarylpyrimidine in one-pot operation starting from 3-trifloxychromone and triarylbismuth.

Generation and Cross-Coupling of Organozinc Reagents in Flow.

A versatile flow synthesis method for in situ formation of organozinc reagents and subsequent cross-coupling with aryl halides and activated carboxylic acids is reported. Formation of organozinc reagents is achieved by pumping organic halides, in the presence of ZnCl2 and LiCl, through an activated Mg-packed column under flow conditions. This method provides efficient in situ formation of aryl, primary, secondary, and tertiary alkyl organozinc reagents, which are subsequently telescoped downstream to a Negishi or decarboxylative Negishi cross-coupling reaction. The described method offers access to a variety of C-C bond formations with organozinc reagents that are otherwise commercially unavailable or difficult to prepare under traditional batch reaction conditions.

Palladium-Catalyzed Intermolecular Arylcarbonylation of Unactivated Alkenes: Incorporation of Bulky Aryl Groups at Room Temperature.

A palladium-catalyzed intermolecular arylcarbonylation of unactivated alkenes has been developed. Unsymmetrical diaryliodonium salts (DAISs) were used as arylation reagents, the bulky aryl group (ArL ) of which was exclusively incorporated into the arylcarbonylated products, which contained the ArL group and a carboxylic ester group at the α- and β-carbon position, respectively, of the original terminal C-C double bond. The reaction features excellent chemo- and regioselectivity, high functional-group tolerance, and very mild reaction conditions.

Palladium‐Catalyzed Intermolecular Arylcarbonylation of Unactivated Alkenes: Incorporation of Bulky Aryl Groups at Room Temperature

AbstractA palladium‐catalyzed intermolecular arylcarbonylation of unactivated alkenes has been developed. Unsymmetrical diaryliodonium salts (DAISs) were used as arylation reagents, the bulky aryl group (ArL) of which was exclusively incorporated into the arylcarbonylated products, which contained the ArL group and a carboxylic ester group at the α‐ and β‐carbon position, respectively, of the original terminal C−C double bond. The reaction features excellent chemo‐ and regioselectivity, high functional‐group tolerance, and very mild reaction conditions.

Transition-Metal-Free N-Arylation of Amines by Triarylsulfonium Triflates.

A simple and efficient method for transition-metal-free N-arylation of various amines by triarylsulfonium triflates is described. Both aliphatic and aromatic amines were smoothly converted at 80 °C in the presence of tBuOK or KOH to give the corresponding mono N-arylated products in good to high yields. The molar ratios of the reactants and the choice of bases had a big effect on the reaction. When a large excess of [Ph3 S][OTf] and tBuOK were employed for primary amines under the standard conditions, the bis(N-phenyl) products were predominantly formed. This method was also applicable to the synthesis of bioactive N-phenyl amino acid derivatives. The control experiments, the deuterium labelling study, and the presence of regioisomers of N-arylated products when using 4-substituted triarylsulfonium triflates suggested that the reaction might proceed through an aryne intermediate. The present protocol demonstrated that triarylsulfonium salts are versatile arylation reagents in the construction of CAr -N bonds.