Aryl Esters Research Articles

Cleavage of Carboxylic Esters by Aluminum and Iodine.

A one-pot procedure for deprotecting carboxylic esters under nonhydrolytic conditions is described. Typical alkyl carboxylates are readily deblocked to the carboxylic acids by the action of aluminum powder and iodine in anhydrous acetonitrile. Cleavage of lactones affords the corresponding ω-iodoalkylcarboxylic acids. Aryl acetylates undergo deacetylation with the participation of the neighboring group. This method enables the selective cleavage of alkyl carboxylic esters in the presence of aryl esters.

Synthesis of Acridinium Photocatalysts via Site-Selective C–H Alkylation

Acridinium dyes have been broadly used as photocatalysts, but it remains synthetically challenging to fine-tune their catalytic performance by functionalization of their structural cores. Acridiniu...

Deciphering the dichotomy exerted by Zn(ii) in the catalytic sp2 C–O bond functionalization of aryl esters at the molecular level

Deciphering the dichotomy exerted by Zn(ii) in the catalytic sp2 C–O bond functionalization of aryl esters at the molecular level

Two new sesquiterpene aryl esters from Armillaria gallica 012m

Two new sesquiterpene aryl esters, armimelleolides A and B (1 and 2), and four known ones, were isolated from the EtOAc extract of Armillaria gallica 012 m by column chromatography on silica gel, reversed-phase C18 silica gel and semi-preparative HPLC. Their structures were elucidated on the basis of spectroscopic methods, including extensive 1 D NMR, 2 D NMR and MS. All these compounds showed potential antitumor activities against at least one of the human cancer cell lines (A549, HCT-116, M231 and W256), with IC50 ranging from 2.57 to 19.94 μM.

Fast Enantio‐ and Chemoselective Arylation of Ketones with Organoboronic Esters Enabled by Nickel/N‐Heterocyclic Carbene Catalysis

AbstractA general, efficient, highly enantio‐ and chemoselective N‐heterocyclic carbene (NHC)/Ni‐catalyzed addition of readily available and stable arylboronic esters to ketones is reported. This protocol provides unexpectedly fast access (usually 10 min) to various chiral tertiary alcohols with exceptionally broad substrate scope and excellent functional group tolerance (76 examples, up to 98 % ee). This process is orthogonal to other known Ni‐mediated Suzuki–Miyaura couplings, as it tolerates aryl chlorides, fluorides, ethers, esters, amides, nitriles, and alkyl chlorides. The reaction is applied to late‐stage modifications of various densely functionalized medicinally relevant molecules. Preliminary mechanistic studies suggest that a rare enantioselective η2‐coordinating activation of ketone carbonyls is involved. This cross‐coupling‐like mechanism is expected to enable other challenging transformations of ketones.

Chemoselective acylation of N-acylglutarimides with N-acylpyrroles and aryl esters under transition-metal-free conditions

The imide moiety is a well-known structural motif in bioactive compounds and a useful building block in a variety of processes.

Catalytic enantioselective synthesis of 1,4-dihydropyridines via the addition of C(1)-ammonium enolates to pyridinium salts.

The regio- and stereoselective addition of C(1)-ammonium enolates – generated in situ from aryl esters and the isothiourea catalyst (R)-BTM – to pyridinium salts bearing an electron withdrawing substituent in the 3-position allows the synthesis of a range of enantioenriched 1,4-dihydropyridines. This represents the first organocatalytic approach to pyridine dearomatisation using pronucleophiles at the carboxylic acid oxidation level. Optimisation studies revealed a significant solvent dependency upon product enantioselectivity, with only toluene providing significant asymmetric induction. Using DABCO as a base also proved beneficial for product enantioselectivity, while investigations into the nature of the counterion showed that co-ordinating bromide or chloride substrates led to higher product er than the corresponding tetrafluoroborate or hexafluorophosphate. The scope and limitations of this process are developed, with enantioselective addition to 3-cyano- or 3-sulfonylpyridinium salts giving the corresponding 1,4-dihydropyridines (15 examples, up to 95 : 5 dr and 98 : 2 er).

Suzuki-Miyaura Cross-Coupling of Esters by Selective O-C(O) Cleavage Mediated by Air- and Moisture-Stable [Pd(NHC)(μ-Cl)Cl]2 Precatalysts: Catalyst Evaluation and Mechanism.

The cross-coupling of aryl esters has emerged as a powerful platform for the functionalization of otherwise inert acyl C-O bonds in chemical synthesis and catalysis. Herein, we report a combined experimental and computational study on the acyl Suzuki-Miyaura cross-coupling of aryl esters mediated by well-defined, air- and moisture-stable Pd(II)-NHC precatalysts [Pd(NHC)(μ-Cl)Cl]2. We present a comprehensive evaluation of [Pd(NHC)(μ-Cl)Cl]2 precatalysts and compare them with the present state-of-the-art [(Pd(NHC)allyl] precatalysts bearing allyl-type throw-away ligands. Most importantly, the study reveals [Pd(NHC)(μ-Cl)Cl]2 as the most reactive precatalysts discovered to date in this reactivity manifold. The unique synthetic utility of this unconventional O-C(O) cross-coupling is highlighted in the late-stage functionalization of pharmaceuticals and sequential chemoselective cross-coupling, providing access to valuable ketone products by a catalytic mechanism involving Pd insertion into the aryl ester bond. Furthermore, we present a comprehensive study of the catalytic cycle by DFT methods. Considering the clear advantages of [Pd(NHC)(μ-Cl)Cl]2 precatalysts on several levels, including facile one-pot synthesis, superior atom-economic profile to all other Pd(II)-NHC catalysts, and versatile reactivity, these should be considered as the 'first-choice' catalysts for all routine applications in ester O-C(O) bond activation.

Влияние метода синтеза трет-бутилированных трифенилфосфатов на эксплуатационные свойства огнестойких жидкостей

Three substituted aryl esters of orthophosphoric acid are the base component of fire-resistant fluids used in the lubricating and electro-hydraulic control system at steam and gas turbines of power plants. In this paper, we studied the possibility of improving the physicochemical and performance properties of phosphates, which are made of the raw materials available in the Russian Federation: phenol and 4-tert-butylphenol by reducing the content of an undesirable component - unsubstituted triphenyl phosphate, which is particularly vulnerable towards water. According to the results of the work, the conclusions were made: - a decrease in the content of triphenyl phosphate to a level of 1% and below leads to some improvement (reduction) of the air release time and an increase in the hydrolytic stability (represented as reducing the change in acid number after prolonged contact with water) of the fire-resistant fluid based on mixed esters. The degree of change of these properties is quantified. - it is possible to achieve the minimum content of triphenyl phosphate by changing the phosphorylation technology. By carrying out the process stepwise, the possibility of the interaction of phosphorus oxychloride with unsubstituted phenol is substantially eliminated, that is why there is almost no probability of an undesirable component formation in the resulting mixture of esters.

Palladium-catalyzed carbonylative synthesis of aryl esters from p-benzoquinones and aryl triflates.

A palladium-catalyzed dicarbonylation of p-benzoquinones with aryl triflates has been developed. Using Cr(CO)6 as the CO source, the reaction proceeds smoothly and efficiently to give a series of aryl esters in moderate to good yields (up to 90%).

Improvement in the Palladium-Catalyzed Miyaura Borylation Reaction by Optimization of the Base: Scope and Mechanistic Study.

Aryl boronic acids and esters are important building blocks in API synthesis. The palladium-catalyzed Suzuki-Miyaura borylation is the most common method for their preparation. This paper describes an improvement of the current reaction conditions. By using lipophilic bases such as potassium 2-ethyl hexanoate, the borylation reaction could be achieved at 35 °C in less than 2 h with very low palladium loading (0.5 mol %). A preliminary mechanistic study shows a hitherto unrecognized inhibitory effect by the carboxylate anion on the catalytic cycle, whereas 2-ethyl hexanoate minimizes this inhibitory effect. This improved methodology enables borylation of a wide range of substrates under mild conditions.

Synthesis and initial screening of lactate dehydrogenase inhibitor activity of 1,3-benzodioxole derivatives

Cancer is one of the main causes of mortality in the world. Many cancer cells produce ATP through high-level lactic acid fermentation catalyzed by lactate dehydrogenase (LDH), which converts pyruvic acid to lactic acid. LDH plays a dominant role in the Warburg effect, wherein aerobic glycolysis is favored over oxidative phosphorylation. Due to the high lactic acid production level in cancer cells, LDH-targeting could be a potential cancer treatment strategy. A few approaches, such as drug treatment, reportedly inhibited LDH activity. In this study, we describe new 1,3-benzodioxole derivatives that might be potential small molecule candidates for LDHA inhibition. The synthesis was carried out by trans-esterification between aryl ester and alcohol groups from piperonyl alcohol. Compounds 2 and 10 exhibited a selective LDHA IC50 value of 13.63 µM and 47.2 µM, respectively. Whereas only compound 10 showed significant cytotoxicity in several lines of cancer cells, especially in human pancreatic cancer PANC-1 cells. These synthesized compounds possess 2 aromatic rings and –CF3 moiety, which expectedly contributes to LDHA inhibition. The presented products have the potential to become a promising LDHA inhibitor drug candidate.

Isolation of a gene cluster from Armillaria gallica for the synthesis of armillyl orsellinate\u2013type sesquiterpenoids

Melleolides and armillyl orsellinates are protoilludene-type aryl esters that are synthesized exclusively by parasitic fungi of the globally distributed genus Armillaria (Agaricomycetes, Physalacriaceae). Several of these compounds show potent antimicrobial and cytotoxic activities, making them promising leads for the development of new antibiotics or drugs for the treatment of cancer. We recently cloned and characterized the Armillaria gallica gene Pro1 encoding protoilludene synthase, a sesquiterpene cyclase catalyzing the pathway-committing step to all protoilludene-type aryl esters. Fungal enzymes representing secondary metabolic pathways are sometimes encoded by gene clusters, so we hypothesized that the missing steps in the pathway to melleolides and armillyl orsellinates might be identified by cloning the genes surrounding Pro1. Here we report the isolation of an A. gallica gene cluster encoding protoilludene synthase and four cytochrome P450 monooxygenases. Heterologous expression and functional analysis resulted in the identification of protoilludene-8α-hydroxylase, which catalyzes the first committed step in the armillyl orsellinate pathway. This confirms that ∆-6-protoilludene is a precursor for the synthesis of both melleolides and armillyl orsellinates, but the two pathways already branch at the level of the first oxygenation step. Our results provide insight into the synthesis of these valuable natural products and pave the way for their production by metabolic engineering.Key points• Protoilludene-type aryl esters are bioactive metabolites produced by Armillaria spp.• The pathway-committing step to these compounds is catalyzed by protoilludene synthase.• We characterized CYP-type enzymes in the cluster and identified novel intermediates.

Isothiourea-catalysed transfer hydrogenation of α,β-unsaturated para-nitrophenyl esters

A protocol for the isothiourea-catalysed transfer hydrogenation of α,β-unsaturated para -nitrophenyl esters using Hantzsch ester has been developed. Good to excellent yields are observed using α,β-unsaturated aryl esters bearing electron-withdrawing β-substituents. The aryl ester products can either be isolated directly in moderate to excellent yields (7 examples, 16–98%) or converted to the corresponding methyl esters (2 examples, 68–70% yield) or benzyl amides (2 examples, 44–88% yield) after in situ reaction of the hydrogenated ester with the appropriate nucleophile. Preliminary experiments showed that modest enantioinduction (76:24 er) is possible when a chiral isothiourea catalyst was used.

Generation and Reactivity of C(1)-Ammonium Enolates by Using Isothiourea Catalysis.

C(1)‐Ammonium enolates are powerful, catalytically generated synthetic intermediates applied in the enantioselective α‐functionalisation of carboxylic acid derivatives. This minireview describes the recent developments in the generation and application of C(1)‐ammonium enolates from various precursors (carboxylic acids, anhydrides, acyl imidazoles, aryl esters, α‐diazoketones, alkyl halides) using isothiourea Lewis base organocatalysts. Their synthetic utility in intra‐ and intermolecular enantioselective C−C and C−X bond forming processes on reaction with various electrophiles will be showcased utilising two distinct catalyst turnover approaches.

Regiodivergent Access to 2- or 3-Substituted Indanones: Catalyst-Controlled Carboacylation via C–C Bond Activation

Indanones are ubiquitous in biologically active compounds. Intramolecular hydroacylation of aldehydes and alkenes is an efficient and atom-economic route to indane rings. However, these reactions a...

Liquid crystalline hyperbranched polyesters with phosphorus functional groups

Liquid crystalline hyperbranched poly(aryl ester)s (A2B3) were prepared by polycondensation reaction of 2-(6-oxido-6H-dibenz<c,e><1,2>oxaphosphorin-6-yl)1,4-naphthalene diol with 1,3,5-benzenetricarbonyl trichloride, taken in two different molar ratios. The chemical structure of the newly synthesized hyperbranched polymers was confirmed by FTIR, 1H NMR, 13C NMR spectroscopy. The polymers exhibited high thermal stability with initial decomposition temperature above 410–435°C and char yield at 700°C higher than 40%. Combined differential scanning calorimetry, polarized optical microscopy and wide-angle X-ray diffraction measurements were carried out to closely examine their thermal behavior and phase transitions.

Ruthenium-Catalyzed Enantioselective Hydrogenation of Hydrazones.

Prochiral hydrazones undergo efficient and highly selective hydrogenation in the presence of a chiral diphosphine ruthenium catalyst, yielding enantioenriched hydrazine products (up to 99% ee). The mild reaction conditions and broad functional group tolerance of this method allow access to versatile chiral hydrazine building blocks containing aryl bromide, heteroaryl, alkyl, cycloalkyl, and ester substituents. This method was also demonstrated on >150 g scale, providing a valuable hydrazine intermediate en route to an active pharmaceutical ingredient.

Nickel(II)-Catalyzed Borylation of Alkenyl Methyl Ethers via C-O Bond Cleavage.

A new protocol has been developed for the borylation of conjugated alkenyl methyl ethers using B2Pin2 via C-O bond cleavage catalyzed by Ni(II). In this cross-coupling reaction, both E/Z isomers of alkenyl ethers are converted into (E)-alkenyl boronic esters with good reactivity. This transformation exhibits high chemoselectivity in the presence of competitive C-O bonds such as aryl ether, ester, amide, and thioether groups, thus providing a new method for the construction of various alkenyl boronates.

A simple method for the synthesis of sulfonic esters

An efficient and simple approach for the direct synthesis of aryl and heteroaryl sulfonic esters was developed using DMS and DES as alkoxysulfonylation reagents. The reaction is operationally simple and scalable. This protocol does not require solvent, expensive catalysts, base, ligand additives or other reagents. A wide range of sulfonic esters were synthesized in moderate to good chemical yields. This method has the advantage of low cost, facile and tolerated a wide range of substrates.