Artificial Disc Research Articles

Anterior Cervical Foraminotomy for Radiculopathy After Cervical Artificial Disc Replacement: Technique Description and Case Report.

Patients may occasionally have persistent or recurrent radicular symptoms after cervical artificial disc replacement (ADR) for cervical spondylotic radiculopathy. We describe our approach using anterior cervical foraminotomy (ACF) to provide symptom relief in such patients without the need to convert to a fusion or remove the ADR implant. Our operative technique for ACF after cervical ADR begins by starting at the lateral edge of the ADR at the superior end plate of the inferior vertebral body. The ipsilateral uncovertebral joint is drilled with a combination of a high-speed burr and diamond-coated burr to minimize the risk of injury to the vertebral artery. The neuroforamen is entered after drilling through the posterior aspect of the uncinate process. The exiting cervical nerve root should be directly visualized, and a Kerrison rongeur may be used to trace along the nerve root laterally to remove any remaining uncinate osteophyte or process. We queried our internal database for patients with recurrent or new radicular pain following cervical ADR who underwent ACF. Clinical characteristics and outcomes were reported. Five patients with recurrent radicular symptoms after ADR were reviewed. Two ACFs were performed at C5-6, and 2 were performed at C6-7. Four patients developed ipsilateral recurrent radicular symptoms, and only 1 patient developed contralateral new radicular symptoms. Three patients reported complete resolution of their new or recurrent radicular symptoms following ACF, and 2 patients reported only partial resolution. No patients required conversion to a fusion. In patients with recurrent symptoms of cervical spondylotic radiculopathy following ADR, ACF with uncovertebral joint resection can be used to provide direct foraminal decompression without the need for implant removal. This approach also preserves motion at the affected level, preserves cervical spinal stability, and prevents the need for spinal fusion. Patients with persistent or recurrent radicular symptoms after cervical ADR may achieve resolution of symptoms through a modified ACF technique.

Cervical Total Disk Replacement: Available Implant Size Matters.

This study was a post hoc analysis of data collected from 2 Food and Drug Administration (FDA) Investigational Device Exemption (IDE) trials. The purposes of this study were to: (1) measure disk space heights adjacent to the level to be treated with a total disk replacement (TDR); (2) analyze cervical disk space heights to be replaced with TDR; and (3) investigate the frequency of use of a smaller height TDR when available. Cervical TDR produces outcomes noninferior or superior to anterior cervical discectomy and fusion. While the restoration of the height of a collapsed, degenerated disk is a surgical goal, there are potential problems with overdistracting the segment with an implant. Disk heights were measured using radiographs from the 1-level Simplify Cervical Artificial Disk IDE trial, producing values for 259 levels adjacent to the treated level and 162 treated levels. The device is available in 4, 5, and 6 mm heights. The 4 mm height became available only after treatment was 13% complete in the single-level trial and was available for all of the 2-level trial. Measurements of 259 adjacent levels found that 55.2% of disk spaces had a height of <4 mm. Among operated levels, 82.7% were <4 mm. When a 4 mm TDR was available, it was used in 38.4% of operated levels in the 1-level trial and 54.3% of levels in the 2-level trial. Among nonoperated levels, 55.2% were of height <4 mm, suggesting that TDRs of greater heights may potentially overdistract the disk space. The 4 mm TDR was selected by surgeons in 49.4% of all implanted levels, suggesting a preference for smaller TDR height. Further investigation is warranted to determine if the lower height implants are related to clinical and/or radiographic outcomes. Level III.

The Application of a Multi-Material Flexible Chain Mail for the Design of an Artificial Spinal Disc to Reproduce Natural Nonlinear and Anisotropic Rotational Behavior.

Inspired by the potential of architected materials for achieving biomimicking functionalities and the advancement of multi-material additive manufacturing to fabricate parts with complex structures and heterogeneous material distributions, this study investigates the feasibility of using a multi-material, flexible chain mail sheet for the design of an additively manufactured artificial spinal disc for reproducing patient-specific anisotropic and nonlinear rotational behaviors. The application of a chain mail-based structure is motivated by its similarities in behaviors compared with a natural disc's fiber network that likewise has negligible bending stiffness and shape-changing ability. The proposed approach for the chain mail sheet design includes an initial characterization of the uniaxial tensile responses of the chain mail unit cell defined as the basic building block of the chain mail sheet, modeling and response calculation, and material optimization. Results show that the additively manufactured chain mail sheet is not only able to exhibit a natural strain-stiffening rotational response but also is able to reproduce natural anisotropy of three natural disc specimens in the six most common rotational scenarios in daily life. This study shows the potential of additively manufactured mechanical-metamaterials-inspired structures for implant design to restore natural mechanics.

Mid-long-term follow-up of operated level kinematics after single-level artificial cervical disc replacement with Bryan disc

ObjectiveEvaluation of the mid-long-term kinematics of single-level Bryan artificial cervical disc replacement (ACDR) in vivo by analyzing the center of rotation (COR) at the operated level.MethodsA retrospective analysis was conducted using data collected from 38 patients who underwent single-level Bryan ACDR from January 2010 to March 2013. Radiological parameters including range of motion (ROM), lordosis angle, translation, and COR were obtained. Clinical outcomes were assessed based on Odom Criteria, modified Japanese Orthopedic Association (mJOA), Neck Disability Index (NDI), and Visual Analogue Scale (VAS) scores. Correlations between COR and other follow-up data were discussed at the last follow-up.ResultsCompared with preoperative values, the last follow-up data showed that 86.84% of cases achieved good-or-excellent outcomes based on Odom criteria; Significant improvements were observed across all scales assessed for clinical outcomes (P < 0.05); Lordosis angle was significantly increased in both the overall cervical spine and the operated level (P < 0.05); ROM of the overall cervical spine, operated level, and adjacent levels was preserved (P > 0.05); There was no significant change in COR at the operated level (P > 0.05). At the last follow-up and at the operated level, COR (Y) showed negative correlations with ROM and translation (P < 0.05), but no follow-up data correlated with COR (X) were found (P > 0.05).ConclusionsSatisfactory clinical and radiological outcomes were achieved 7 years or more after single-level Bryan ACDR. At the operated level, preoperative COR was maintained, probably due to replicating the physiological interrelations of COR (Y), translation, and ROM.

The development of artificial cervical disc replacement from the perspective of orthopedic bionic therapy

The modern surgical treatment of cervical degenerative disc disease can be traced back to the advent of anterior cervical decompression and fusion.With the emergence of fusion-related complications,different scholars have promoted the gradual transformation of cervical degenerative disc diseases from "fusion fixation" to "non-fusion reconstruction" through in-depth fusion with materials science,engineering mechanics and other disciplines.The innovation of this treatment concept is consistent with the original intention of "structural remodeling,functional reconstruction,maximum repair and reconstruction of the morphology and function of skeletal muscle system" in orthopedic bionic treatment,which is essentially in line with the "bionic alternative therapy" in orthopedic bionic therapy.This paper focuses on the surgical treatment of cervical degenerative disc diseases,reviews the development history of artificial cervical disc replacement,analyzes the evolution from orthopedic biomimetic therapy,and explores a new direction for the design of artificial cervical disc prostheses and the treatment of cervical degenerative disc diseases in the future.

Early efficacy of three dimensional printed anatomical biomimetic cervical artificial disc replacement in the treatment of cervical degenerative diseases

Objective: To investigate the efficacy and safety of a new cervical artificial disc prosthesis in the treatment of cervical degenerative diseases. Methods: The clinical data of 18 patients with single-level cervical degenerative diseases who underwent three dimensional printed anatomical bionic cervical disc replacement at Department of Spinal Surgery,Honghui Hospital,Xi'an Jiaotong University from May 2019 to July 2020 were analyzed retrospectively. There were 7 males and 11 females,aged (45±8) years old(range:28 to 58 years).The surgical segment was located at C3－4 level in 2 cases, C4－5 level in 5 cases, C5－6 level in 9 cases, and C6－7 level in 2 cases.The clinical and radiographic outcomes were recorded and compared at preoperative,postoperative times of one month and twelve months.The clinical assessments contained Japanese orthopedic association (JOA) score,neck disability index (NDI) and visual analogue scale (VAS).Imaging assessments included range of motion (ROM) of cervical spine, prosthesis subsidence and prosthesis anteroposterior migration.Repeated measurement variance analysis was used for comparison between groups,and paired t test was used for pairwise comparison. Results: All patients underwent the operation successfully and were followed up for more than 12 months.Compared with preoperative score,the JOA score,NDI and VAS were significantly improved after surgery (all P<0.01).There was no significant difference in postoperative ROM compared with 1-and 12-month preoperative ROM (t=1.570,P=0.135;t=1.744,P=0.099). The prosthesis subsidence was (0.29±0.13) mm (range: 0.18 to 0.50 mm) at 12-month postoperatively.The migration of prosthesis at 12-months postoperatively were (0.71±0.20) mm (range: 0.44 to 1.08 mm).There was no prosthesis subsidence or migration>2 mm at 12-month postoperatively. Conclusion: Three dimensional printed anatomical biomimetic cervical artificial disc replacement has a good early clinical effect in the treatment of cervical degenerative diseases, good mobility can be obtained while maintaining stability.

Cervical non-fusion using biomimetic artificial disc and vertebra complex: technical innovation and biomechanics analysis

BackgroundChanges in spinal mobility after vertebral fusion are important factors contributing to adjacent vertebral disease (ASD). As an implant for spinal non-fusion, the motion-preserving prosthesis is an effective method to reduce the incidence of ASD, but its deficiencies hamper the application in clinical. This study designs a novel motion-preserving artificial cervical disc and vertebra complex with an anti-dislocation mechanism (MACDVC-AM) and verifies its effect on the cervical spine.MethodsThe MACDVC-AM was designed on the data of healthy volunteers. The finite element intact model, fusion model, and MACDVC-AM model were constructed, and the range of motion (ROM) and stress of adjacent discs were compared. The biomechanical tests were performed on fifteen cervical specimens, and the stability index ROM (SI-ROM) were calculated.ResultsCompared with the intervertebral ROMs of the intact model, the MACDVC-AM model reduced by 28–70% in adjacent segments and increased by 26–54% in operated segments, but the fusion model showed the opposite result. In contrast to the fusion model, the MACDVC-AM model diminished the stress of adjacent intervertebral discs. In biomechanical tests, the MACDVC-AM group showed no significant difference with the ROMs of the intact group (p > 0.05). The SI-ROM of the MACDVC-AM group is negative but close to zero and showed no significant difference with the intact group (p > 0.05).ConclusionsThe MACDVC-AM was successfully designed. The results indicate that the MACDVC-AM can provide physiological mobility and stability, reduce adjacent intervertebral compensatory motion, and alleviate the stress change of adjacent discs, which contributes to protect adjacent discs and reduce the occurrence of ASD.

An Artificial PVA-BC Composite That Mimics the Biomechanical Properties and Structure of a Natural Intervertebral Disc.

Disc herniation is one of the most ubiquitous healthcare problems in modern cities—severe patients eventually require surgical intervention. However, the existing operations—spinal fusion and artificial disc replacement—alter the biomechanics of the spine, leaving much room for improvement. The appropriateness of polyvinyl alcohol (PVA) for biomedical applications has been recognised due to its high water content, excellent biocompatibility, and versatile mechanical properties. In this study, a newly-designed PVA–bacterial cellulose (PVA-BC) composite was assembled to mimic both the biomechanics and annular structure of natural intervertebral discs (IVDs). PVA-BC composites of various concentrations were fabricated and tested under unconfined compression and compressive creep in order to acquire the values of the normalised compressive stiffness and whole normalised deformation. The normalised compressive stiffness increased considerably with an increasing PVA concentration, spanning from 1.82 (±0.18) to 3.50 (±0.14) MPa, and the whole normalised deformation decreased from 0.25 to 0.13. Formulations of 40% PVA provided the most accurate mimicry of natural human IVDs in normalised whole deformation, and demonstrated higher dimensional stability. The biocompatible results further confirmed that the materials had excellent biocompatibility. The novel bionic structure and formulations of the PVA-BC materials mimicked the biomechanics and structure of natural IVDs, and ensured dimensional stability under prolonged compression, reducing the risk of impingement on the surrounding tissue. The PVA-BC composite is a promising material for third-generation artificial IVDs with integrated construction.

Single-level cervical disc arthroplasty in the spine with reversible kyphosis: A finite element study.

BackgroundOur previous studies found the single‐level cervical disc arthroplasty (CDA) might be a feasible treatment for the patients with reversible kyphosis (RK). Theoretically, the change of cervical alignment from lordosis to RK comes with the biomechanical alteration of prostheses and cervical spine. However, the biomechanical data of CDA in the spine with RK have not been reported. This study aimed at establishing finite element (FE) models to (1) explore the effects of RK on the biomechanics of artificial cervical disc; (2) investigate the biomechanical differences of single‐level anterior cervical discectomy and fusion (ACDF) and CDA in the cervical spine with RK.MethodsThe FE models of the cervical spine with lordosis and RK were constructed, then three single‐level surgical models were developed: (1) RK + ACDF; (2) RK + CDA; (3) lordosis + CDA. A 73.6‐N follower load combined with 1 N·m moment was applied at the C2 vertebra to produce cervical motion.ResultsAt the surgical level, “lordosis + CDA” had the greatest ROM (except for flexion) while “RK + ACDF” had the minimum ROM. However, at adjacent levels, the ROM of “RK + ACDF” increased by 4.05% to 38.04% in comparison to “RK + CDA.” “RK + ACDF” had the greatest prosthesis interface stress, while the maximum prosthesis interface stress of “RK + CDA” was at least 2.15 times higher than “lordosis + CDA.” Similarly, “RK + ACDF” had the greatest intradiscal pressure (IDP) at adjacent levels, while the IDP of “RK + CDA” was 1.6 to 6.7 times higher than “lordosis + CDA.” At the surgical level, “RK + CDA” had the greatest facet joint stress (except for extension), which was 1.9 to 11.2 times higher than “lordosis + CDA.” At the adjacent levels, “RK + CDA” had the greatest facet joint stress (except for extension), followed by “RK + ACDF” and “lordosis + CDA” in descending order.ConclusionsRK significantly changed the biomechanics of CDA, which is demonstrated by the decreased ROM and the significantly increased prosthesis interface stress, IDP, and facet joint stress in the “RK + CDA” model. Compared with ACDF, CDA overall exhibited a better biomechanical performance in the cervical spine with RK, with the increased ROM of surgical level and facet joint stress and the decreased ROM of adjacent levels, prosthesis interface stress, and IDP.

A comparative finite element analysis of artificial intervertebral disc replacement and pedicle screw fixation of the lumbar spine

Titanium alloy-based Pedicle screw-rod fusion is a very common technique to provide higher fusion regularity than other methods. In recent times, Carbon-fibre-reinforced (CFR)-PEEK rod is used to better reduce the fusion rate. Alternatively, total disc replacement (TDR) is also very common for the non-fusion treatment method for degenerative disc disease (DDD). This study aims to investigate flexibility (ROM), stability, stress condition in implant, implant adjacent bone of the implanted lumbar spine during different physiological movements and loading environments. The finite element (FE) intact model of the lumbar spine (L2-L5) with two-level pedicle screw-rod fusion at L3-L4-L5 and two-level artificial disc replacement was developed. CFR-PEEK was taken for rod for semi-rigid fusion. UHMWPE was taken as core part of the artificial disc. The FE models were simulated under 6, 8 and 10 Nm moments in left right lateral bending, flexion and extension movements. The total ROM was reduced for two-level pedicle screw fixation and increased for the artificial disc replacement model during flexion extension compared to the intact spine. The total ROM was reduced by around 54% and 25% for two-level fixation and increased by 30% and 19.5% for artificial disc replacement spine, under flexion-extension and left-right lateral bending respectively. For screw fixation, the ROM increased by 15% and 18% reduced by 4.5% and 14% for disc replacement at the adjacent segments for flexion-extension and left-right lateral bending.

A meta-analysis comparing the short- and mid- to long-term outcomes of artificial cervical disc replacement(ACDR) with anterior cervical discectomy and fusion (ACDF) for the treatment of cervical degenerative disc disease.

Anterior cervical discectomy and fusion (ACDF) surgery is commonly performed to treat cervical degenerative disc disease (CDDD). The lost of range of motion (ROM) is also found after ACDF, which contributes to degenerate in adjacent segment disease (ASD). Artificial cervical disc replacement (ACDR), an alternative to ACDF, is developed to preserve the ROM and reduce ASD. This article aims to compare the outcomes between ACDR and ACDF in the short-, mid-, and long-term. Databases including Cochrane, Embase, PubMed, and Web of Science were searched. Only RCTs were included in this meta-analysis, and the search strategy followed the requirements of the Cochrane Handbook. The strength of evidence was assessed using GRADE. Two reviewers independently assessed the methodological quality of each included study and extracted the relevant data. Thirty prospective RCTs were included. Prolonged operative duration, better overall success, neurological success, and NDI success rates were found in ACDR group in all follow-up periods, with lower dysphagia/dysphonia during short-term follow-up. Moreover, a lower ASD was found in ACDR group during long-term follow-up and overall analysis, with lower reoperation rates in all follow-up periods. Comparable length of hospital stay and blood loss were found in both groups. Moreover, ASD was similar in short- and mid-term follow-ups, while dysphagia/dysphonia incidence was similar in mid- and long-term follow-ups. The incidence of implant events was comparable in all follow-up periods (p > 0.05). ACDR is as effective as ACDF and superior for some success rates. Disc replacement can reduce the risk of dysphagia/dysphonia, ASD, and re-operation.

Segmental Motion of Cervical Arthroplasty Leads to Decreased Adjacent-Level Degeneration: Analysis of the 7-Year Postoperative Results of a Multicenter Randomized Controlled Trial.

Cervical artificial disc replacement (C-ADR) has become a common and accepted surgical treatment for many patients with cervical disc degeneration/herniation and radiculopathy who have failed nonoperative treatment. Midterm follow-up studies of the original investigational device exemption trials comparing C-ADR to traditional anterior cervical discectomy and fusion (ACDF) have revealed C-ADR patients have less adjacent-level disease and fewer reoperations at 5 to 7 years. The purpose of this study was to examine the relationship of radiographic adjacent-level disease (R-ALD) with the amount of index-level segmental range of motion (ROM) in C-ADR patients using the long-term follow-up data from the ProDisc-C investigational device exemption trial. This was a post hoc analysis of a 1:1 randomized controlled trial. The initial previously described Food and Drug Administration-approved 2-year study was extended, and consenting patients in the original study were followed at annual intervals up to 7 years. Logistic regression was used to assess any progression in adjacent-level disease (ALD). Ordinal logistic regression was also used to assess the relationship between any progressive R-ALD and final flexion extension (F/E) ROM in C-ADR patients. Spearman's rank-order correlation was used when R-ALD was kept as an ordinal variable to assess the same relationship. At the last follow-up visit, the rate of progressive R-ALD was significantly higher in ACDF patients than in C-ADR patients. When C-ADR patients were divided into 3 groups based on final F/E ROM, those with 0° to 3° (n = 19), 4° to 6° (n = 15), and 7° (n = 42) of segmental motion at the index procedure level, the rate of progressive R-ALD trended significantly with final ROM (P = 0.01). C-ADR leads to a significant decrease in R-ALD compared to ACDF. The difference in R-ALD is related to the preservation of motion at the index level and resultant preservation of kinematics and forces across the adjacent disc space.

Factors Associated with Postoperative Rehospitalization in Patients with Cervical Disc Herniation.

Cervical disc herniation (CDH) is a prevalent disease because of the poor living habits of and great pressure in modern society. Patients experience hand numbness, neck stiffness, soreness, and weakness due to neck nerve root compression, which leads to a gradual increase of neurosurgery outpatients. Although poor posture by the overuse of computers is possibly the origin of CDH, analysis of related factors causing the rehospitalization for CDH patients after surgery in Taiwan is not commonly reported. Thus, the present study focused on the demographics and surgery-related treatment on the relevance of rehospitalization for CDH patients after surgery. The design of the study was retrospective, and we collected data by medical record review, which was derived from the inpatient surgery data of patients at a medical center in southern Taiwan. The study lasted two years from 1 January 2017 to 31 December 2018, and a total of 248 patients underwent surgery for intervertebral disc protrusion in the neck. The retrospective study adopted narrative statistics, the chi-squared test, and binary logistic regression analysis to identify factors affecting postoperative rehospitalization. Among 248 postoperative patients with intervertebral disc protrusion, 178 underwent cervical fusion surgery, and 32 were rehospitalized after surgery for one-year follow up, accounting for an overall prevalence rate of 12.9%. There were no significant differences in sex, age, occupation, hypertension, anterior cervical discectomy and fusion, artificial disc replacement, hybrid surgery, and postoperative cervical coil use (p > 0.05). The results of binary logistic regression analysis showed statistically significant differences in abnormal body mass index (p = 0.0187, 95% CI = 1.238–10.499), diabetes (p = 0.0137, 95% CI = 1.288–9.224) and cervical vertebral surgery hospital days (p = 0.0004, 95% CI = 1.028–1.102), predicting the outcome of rehospitalization for CDH patients after surgery. The above results showed that abnormal body mass index, diabetes, and cervical vertebral surgery hospitalization days impacted rehospitalization in CDH patients after surgery. Thus, to prevent diabetes, weight control must be monitored, and maintaining correct posture can reduce CDH and decrease the rate of rehospitalization after surgery, which provides a critical reference for hospital managers and clinical staff.

Wear Performance of UHMWPE and PCU Artificial Disc Materials

Wear Performance of UHMWPE and PCU Artificial Disc Materials

Metallic Artifact Reduction of Multiacquisition With Variable Resonance Image Combination Selective-Short Tau Inversion Recovery for Postoperative Cervical Spine With Artificial Disk Replacement: A Preliminary Study.

ObjectiveThis study aimed to evaluate multiacquisition with variable resonance image combination selective short tau inversion recovery (MAVRIC SL STIR) for metallic artifact reduction in magnetic resonance imaging (MRI) of postoperative cervical spine with artificial disk replacement.MethodsA porcine cervical spine with artificial disk replacement was subject to 3 T MRI with variable fat-suppressed fluid-sensitive sequences. Five volunteers underwent MRI with MAVRIC SL STIR and STIR. Quantitative and qualitative analyses were performed for metallic artifact reduction.ResultsMAVRIC SL STIR showed the least signal void areas in the tissue phantom and volunteer study. In the tissue phantom study, MAVRIC SL STIR showed the best visualization of anatomic structure, least distortion, and signal pile-up. However, it ranked last for the homogeneity of fat suppression among sequences. In the volunteer study, MAVRIC SL STIR showed better visualization of anatomic structure and lesser distortion, but showed worse image quality of the spinal cord than STIR in the sagittal plane (P < 0.05).ConclusionsMAVRIC SL STIR might be useful for visualization of anatomy by reduction of signal void areas and distortion in the operated site but should be used as a complement to STIR for evaluation of the spinal cord signal change.

Comparison of Radiographic Reconstruction and Clinical Improvement between Artificial Cervical Disc Replacement and Anterior Cervical Discectomy and Fusion.

Background The surgical management of cervical degenerative disc degeneration (CDDD) has not reached a consensus. Artificial cervical disc replacement (ACDR) has been shown to be efficient in reducing symptoms after CDDD, although the topic remains highly controversial in this field. This study aimed to evaluate the effectiveness of ACDR on the treatment of CDDD on the aspect of radiographic reconstruction and clinical improvement compared with anterior cervical discectomy and fusion (ACDF). Methods This was a retrospective comparative study with 47 patients who underwent single-level ACDR and 46 patients who underwent single-level ACDF. The radiographic reconstruction was assessed by the cervical sagittal alignment parameters, consisting of two aspects, distance and angle, such as cervical sagittal vertical axis (cSVA), cervical lordosis (CL), T1 slope (T1s), and intervertebral space height (ISH). The clinical improvement was assessed by patient-related outcomes (PROs), consisting of two aspects, relief of axial neck pain and recovery of cervical dysfunction, measured through the Visual Analogue Scale (VAS), Neck Disability Index (NDI), and Japanese Orthopedic Association (JOA). Results Significant variations were achieved on aspects of radiographic reconstruction and clinical improvement after ACDR (P < 0.05), which were similar to that of the ACDF group (P < 0.05). A significantly larger postoperative range of motion (ROM) was found in patients less than 45 years of age in the ACDR group (P < 0.05). In addition, a significantly better postoperative JOA was found in patients with a preoperative ISH less than 4 mm in the ACDF group than that in the ACDR group (P < 0.05). Other than that mentioned above, no significant variations in radiographic and clinical outcomes were found between the two groups (P > 0.05). Conclusions Overall, this study showed that a similar capability in terms of radiographic reconstruction and clinical improvement was found between the two methods. Specific concerns should be analyzed while choosing between an ACDR and an ACDF. It should be pointed out that, based on our experience, if the patient is younger, ACDR is recommended; for patients with preoperative ISH less than 4 mm, ACDF is more recommended.

Midterm osteolysis-induced aseptic failure of the M6-C™ cervical total disc replacement secondary to polyethylene wear debris

BackgroundAccording to published meta-analyses, cervical total disc replacement (CTDR) seems to be superior to anterior cervical decompression and fusion (ACDF) in most clinical parameters. Despite short-term clinical success of CTDR, there are concerns regarding long-term durability of these prostheses.MethodsThis prospective study involved 382 patients who received standalone CTDR or a hybrid procedure (ACDF/CTDR). A retrospective comparison between different CTDR devices was conducted regarding patient-reported outcome measures (PROMs), failure scenarios, and revision surgeries. The M6-C™ Artificial Cervical Disc (Orthofix, Lewisville, Texas) cohort was compared to the other CTDR devices clinically. Etiological reasons for revision, and the surgical technique of the revision was investigated.ResultsFifty-three patients received M6-C CTDR. Eighteen patients (34%) were revised at an average of 67 months postoperatively for wear-induced osteolysis. There were three additional cases of pending revision. The PROMs of the two groups were similar, indicating that the failure mode (wear-induced osteolysis) is often asymptomatic. The demographics of the two groups were also similar, with more women undergoing revision surgery than men. There were three one-level CTDR, four two-level hybrids, seven three-level hybrids, and three four-level hybrids revised anteriorly. Sixteen patients underwent removal of the prosthesis and were treated according to the extent of osteolysis. There were four vertebrectomies, six revisions to ACDF, and six revisions to another CTDR. One patient underwent supplemental fixation using a posterior approach. The other CTDR cohort had an incidence of 3.3% at the equivalent time, and none of these were due to osteolysis or wear-related events.ConclusionsThere is a concerning midterm failure rate related to ultra-high-molecular-weight-polyethylene wear-induced osteolysis in the M6-C. Patients implanted with the M6-C prosthesis should be contacted, informed, and clinically and radiologically assessed.

Biomechanical Analysis of Hybrid Revision Surgeries Using Artificial Discs and Zero-Profile Devices for Treating Two-Level Adjacent Segment Degeneration after Primary ACDF: A Finite Element Study

Biomechanical Analysis of Hybrid Revision Surgeries Using Artificial Discs and Zero-Profile Devices for Treating Two-Level Adjacent Segment Degeneration after Primary ACDF: A Finite Element Study

Spine Surgery: A Narrative Review About Recent Updates and Future Directions

Background: Advances in case selection, operative methods, and postsurgical care have facilitated spine surgeons to manage complex spine cases with short operative times, decreased hospital stay and improved outcomes. Methods: This is an overview of recent updates and future directions in the field of spine surgery. All the articles were obtained through a literature review on PubMed. Results: Minimally invasive spine procedures like Endoscopic spine surgeries, Oblique Lumbar Interbody Fusion, use of retractor systems, etc. are emerging in rapidly in modern world. Fusion surgeries are associated with adjacent level disease hence, motion preservation surgeries that mimic the natural biomechanics of the spine are being explored as alternatives. In view of risks to vital structures, nerve injury due to mal-positioning, etc.; robotic spine surgery has paved a way to allow surgeons real-time procedural manipulation along with instrument control, real-scale magnification. Many high-impact discoveries in cancer research, stereotactic radiotherapy, newer combinations of chemotherapy, and tumor-specific antibodies have increased our understanding of spine oncology. Past two decades have seen many advancements in treatment of spine deformities right from initial radiographic assessment, surgical planning to postoperative care. Conclusion: All in all, all stakeholders in innovation including the industry, scientists and surgeons must work in an open and honest collaboration to benefit the future patients and continue the evolution in Spine Surgery. Keywords: Spine surgery, Recent updates, Minimally invasive surgery, Artificial disc replacement, Artificial intelligence.

Морфоскопическая и морфометрическая характеристики межпозвоночного диска LV-SI у лиц молодого и среднего возраста

Objective: to study the morphoscopic and morphometric characteristics of the LV-SI intervertebral disc according to magnetic resonance imaging. Materials and methods. The analysis of magnetic resonance imaging of 90 patients (66 men, 24 women) who did not have diseases of the lumbar spine was performed. Various morphometric parameters of the intervertebral disc (IVD) and nucleus pulposus (NP) at the LV-SI level were measured using software for processing images created on an MRI machine. The obtained data were compared between men and women, asthenics, normosthenics, hypersthenics and young (from 18 to 44 years old) and middle-aged (from 45 to 60 years old) people. In addition, morphoscopic characteristics were studied: the shape of the IVD and NP in the axial plane. Results. It was found that in normal IVD LV-SI is most often represented by elliptical (54,5%) less often kidney-shaped (45,5%) forms. Normally, the NP has an oval (57,8%) and kidney-shaped (42,2%) shape. It was shown that in men, the dorsal height of the IVD, its width, anteroposterior size, square as well as the longitudinal-transverse index of the NP were significantly higher. It has been proven that there are no significant differences in the shape of the IVD between asthenics, normo- and hypersthenics, while the height of the IVD in the center, its ventral, dorsal heights and most lateral IVD height are significantly greater in hypersthenics. It has been proved that the kidney-shaped form of NP was significantly more common in asthenics, and the oval form - in hypersthenics, while the morphometric parameters of NP did not significantly differ between extreme body types. A tendency to a decrease in IVD height in middle-aged people compared to young people was shown. Conclusion. The results obtained are necessary when planning the operation, as well as for the manufacture of rigid implants and artificial discs for arthroplasty and interbody fusion.