Artificial Absorber Research Articles

Generation of high-energy self-mode-locked pulses in a Tm-doped fiber laser

The incorporation of a material-based or artificial saturable absorber into a fiber laser cavity imposes a limitation on energy enhancement owing to its low damage threshold and high environmental sensitivity. To address this issue, one promising alternative approach is the utilization of the self-mode-locking technique. Here, we present a robust self-mode-locked Tm-doped fiber laser with high pulse energy emission. A simple and compact fiber laser structure is realized by utilizing a section of a Tm-doped fiber, serving both as a gain medium and a saturable absorber. Thus, the operational stability is enhanced, especially under high-energy conditions. Furthermore, the realization of high-energy pulses is accomplished through the integration of dispersion management technique. Experimental results reveal that the maximum single-pulse energy increases from 34.8 pJ to 120.2 nJ as the round-trip group delay dispersion decreases from −0.43 to −12.40 ps2. The proposed self-mode-locked Tm-doped fiber laser under high-energy operation exhibits remarkable performance. Our results provide a simple approach to obtaining a mid-infrared laser source with high pulse energy and hold significant potential for advancing high-energy laser systems.

Passively harmonic dissipative soliton generation in normal dispersion erbium-doped fiber laser using SMS fiber as artificial saturable absorber

Passively harmonic mode-locking has been experimentally demonstrated in an erbium-doped fiber laser with large normal dispersion using single-multi-single mode structure as artificial saturable absorber. By increasing the pump power under the same polarization setting, the mode-locking operation can switch from fundamental mode-locked to 5th order harmonic mode-locked. Highest repetition rate of 4.26 MHz (5th order harmonic) is observed, with pulse width and pulse energy ascertained at 290 fs and 3.0 nJ, respectively. Excellent signal-to-noise ratio (SNR) of above 50 dB is observed for all harmonic orders. The findings validated that SMS structure can be used to generate stable and switchable high order of harmonic mode-locked. The low-cost SMS fiber for harmonic mode-locked generation technique could lay the groundwork for future sustainable industrial growth.

Exceptional point proximity-driven mode-locking in coupled microresonators.

We show theoretically and numerically that mode-locking is feasible with a coupled-cavity system with gain and loss, notably, without any natural saturable absorber. We highlight that in the vicinity of the exceptional point, system Q exhibits substantial modulation even with minor refractive index changes and a minimal Kerr effect contribution. Leveraging this unique behavior, we propose an unprecedented approach wherein the lossy auxiliary cavity functions as an efficient artificial saturable absorber, thus facilitating mode-locking. This approach is not only novel, but also presents considerable advantages over conventional systems where both gain and saturable absorption are contained within a single microcavity. These benefits include reduced operational power and ease of post-adjustment, achievable through the manipulation of the coupling strength between the two microcavities.

Dual-band flexible metamaterial absorber working in 5G band

This article presents a thin and flexible artificial electromagnetic absorber with two absorption peaks at frequencies of 28 and 39 GHz for 5G communication. Copper and a flexible FR4 substrate are used in a pyramid-shaped layered configuration, achieving absorption rates exceeding 99% at 28 and 39 GHz. The thickness of the proposed structure is only 0.34 mm, which is ∼1/32 and 1/23 of the corresponding free-space wavelengths at the absorption frequencies. Due to its symmetric structure, the absorber is polarization-insensitive. Furthermore, the proposed structure exhibits over 90% absorption within the incident angle range of −45° to 45°. To investigate its absorption mechanism, the electric field and magnetic field distributions at the absorption frequencies were analyzed. Then a 150 × 150 mm2 sample was fabricated using printed circuit board manufacturing techniques. This sample was placed on flat or curved surfaces and tested under normal or oblique incidences. The experimental results were consistent with the simulated results, confirming the feasibility of the design. This absorber can be applied in 5G communication and millimeter-wave imaging.

Nanosecond pulse generation mode-locked by an artificial saturable absorber based on SMF-MMF-SMF structure

We present a noteworthy demonstration of nanosecond pulse generation utilizing an all-fiber artificial saturable absorber (SA) structure, composed of single-mode multimode single-mode fiber (SMF-MMF-SMF), integrated into a passively mode-locked erbium-doped fiber laser (EDFL). The SMS-based SA effectively phase-locked the longitudinal modes within the elongated EDFL cavity, resulting in the production of mode-locked pulses operating at 1567 nm. Mode-locking is achieved through the Kerr effect of nonlinear multimode interference. The pulse repetition rate is synchronized with the fundamental frequency at 1.28 MHz. At a pump power of 269.1 mW, the laser achieves a remarkable peak average pulse energy of 6.0 nJ. Demonstrating outstanding stability, the laser operation exhibits a peak-to-pedestal extinction ratio of 70 dB for the fundamental frequency. We are confident in the substantial potential of this SMS structure, positioning it as a compelling candidate for integration into ultrafast fiber lasers, with promising prospects in the field.

Performance enhancement via XPM suppression of a linear all-PM mode-locked fiber oscillator.

We demonstrate the strong performance enhancement of an all-polarization-maintaining mode-locked fiber oscillator using a linear self-stabilized fiber interferometer via the suppression of the cross-phase modulation (XPM). Numerical simulations reveal that XPM significantly affects the saturable absorber dynamics resulting in strong distortions of the mode-locked steady-states and output pulse quality. For experimental verification, we construct an oscillator with XPM suppression, employing an intra-cavity YVO4 crystal to obtain a differential walk-off effect and compare its characteristics with a reference oscillator in a standard configuration. It is shown, that the XPM suppression not only lowers the mode-locking threshold by more than 45% but further results in improved pulse quality at the output ports and reduced nonlinear loss in the artificial saturable absorber.

Domain-wall dark pulse generation with SMF-GIMF-SMF structure as artificial saturable absorber

We experimentally demonstrated the generation of domain-wall dark pulse in an Erbium-doped fiber laser using the combination of a 10 cm graded index multimode fiber sandwiched by single mode fibers as artificial saturable absorber. The interaction of phase difference in grade index multimode fiber allowed the stable dual-wavelength oscillation in the cavity. The dual-wavelength centered at 1567.2 nm and 1569.4 nm produces the topological defect in temporal domain and achieved a dark pulse formation with repetition rate of 21.5 MHz. The highest average pulse energy is calculated as 769.6 pJ with pulse width of 5 ns. Throughout the operating pump power range, the average pulse energy and output power increase linearly, with R2 of 0.9999 and achieved the laser efficiency of 9.33%. From the measurement in frequency domain, the signal-to-noise ratio is measured as 49 dB. As compared to reported DW dark pulse works, the proposed structure only required a short length of multimode fiber, which allowed the domain-wall dark pulse to achieve higher pulse repetition rate. The venture of domain wall dark pulse is potentially to pave the foundation toward sustainable industrial growth.

All-fibre mode-locked laser using SMF-GIMF-SMF structure as artificial saturable absorber

In this work, we proposed and experimentally demonstrated a combination of single mode fibre (SMF) with graded indexed multimode fibre (GIMF) to form an artificial saturable absorber. A SMF-GIMF-SMF structure is incorporated into Erbium-doped fibre laser (EDFL) system to induce mode-locking operation with very low threshold pump power of 41.6 mW. The highest pulse energy obtained is 406.65 pJ at pump power of 84.7 mW. With a relatively short GIMF used as artificial saturable absorber, high fundamental repetition rate with low threshold power is achieved. The proposed artificial saturable absorber is potentially to contribute to the development of sustainable industry, innovation, and infrastructure.

All-fiber Q-switched erbium-doped fiber laser generation with SMF-SIMF-SMF structure as artificial saturable absorber

A passively Q-switched Erbium-doped fiber laser (EDFL) was successfully demonstrated using SMF (single-mode fiber)-SIMF (step-index multimode fiber)-SMF or SMS structure as a saturable absorber (SA). The SMS structure operates on the Kerr-effect of multimode interference (MMI). To modulate the cavity loss, a 158 mm length of SIMF was fusion spliced into a ring cavity. By properly adjusting the in-line polarization controller (PC) that holds the SIMF, we were able to generate steady Q-switched pulses. As the input pump power increased from 115 to 343 mW, the repetition rate of the Q-switched laser increased from 87 to 158 kHz, while the corresponding pulse width decreased from 4.2 µs to 2.5 µs. The signal-to-noise ratio (SNR) of the fundamental mode for the pulsed laser was around 72 dB at a central wavelength of 1530 nm. Our results indicate that the SMS structure can be used as an SA to generate stable Q-switched EDFL with very simple cavity settings.

Wavelength-stabilized figure-of-9 thulium-doped all-fiber laser emitting 560 fs pulses

We demonstrate a figure-of-9 all-fiber thulium-doped laser (TDFL) that generates 560 fs long pulses at 1948 nm wavelength. In order to achieve self-starting passive mode-locking, we utilize an in-fiber Faraday rotator to induce a nonreciprocal phase shift. To the best of our knowledge, this is the first all-fiber TDFL that combines an artificial saturable absorber (SA) with a chirped fiber Bragg grating (CFBG) as a wavelength-selective reflector. This cavity design is an excellent candidate to pump nonlinear processes such as supercontinuum and frequency comb generation since it does not require any SA material that degrades over time for mode-locking and could be made wavelength-tuneable via the CFBG.

Amplitude noise suppression in Yb:doped NALM oscillators utilizing saturable absorber settings.

Optical frequency combs based on fiber lasers mode-locked (ML) with a nonlinear amplifying loop mirror (NALM) have become the backbone of many cutting-edge applications, ranging from precision spectroscopy to quantum physics. Being extremely precise measurement tools, understanding their passive stability and low-noise operation regimes is vital. While several influences on the laser noise have been studied, many parameters remain poorly understood. Here, we systematically analyze under which preconditions the artificial saturable absorber settings of the laser can be modified during operation without losing mode-locking and the effects on laser noise, the spectrum and the output power. Our results show that it is possible to decrease the amplitude noise (AM noise) of the laser by more than 50 % by simply rotating a wave plate within the laser cavity. Additionally, we discuss differences to a similar effect observed in a NALM-alike laser amplifier and of changing the output coupling. These findings deepen our understanding and capabilities of optimizing the noise performance of ML fiber lasers, enable us to investigate new parameter spaces, and can be used to further optimize the noise performance of the NALM laser design, making it an ideal light source for advanced setups both in research and industry.

L-band mode-locked fiber laser using all polarization-maintaining nonlinear polarization rotation.

For the first time, to the best of our knowledge, in the soliton regime, we demonstrate an L-band fiber laser mode-locked by all polarization-maintaining (all-PM) nonlinear polarization rotation (NPR). A numerical study suggests that lengthening the NPR section boosts modulation depth and lowers saturation power of the artificial saturable absorber (SA). With the longest NPR section to date (21 m), the laser emits 1.25-ps soliton pulses at 1584.2 nm and a 3.9-MHz repetition rate. Our laser provides a promising L-band seed source, exhibiting improved repeatability and stability compared with non-PM L-band pulse fiber lasers.

Three-step staircase-like pulses generation in a butterfly-shaped mode-locked fiber laser

We experimentally observed three-step staircase-like pulses (TSSLP) delivered from a butterfly-shaped mode-locked fiber laser An integrated twin nonlinear amplifying loop mirrors (NALM) incorporating highly nonlinear fibers (HNLF 65, 52 m) acts as a homogeneous hybrid-like artificial saturable absorber (HH-SA). With the most available pump power, the obtained sub-stairs in TSSLP with 10.06, 9.61, 12.59 ns durations and 0.33, 3.46 and 5.38 W peak intensities at 1.23 MHz, respectively. The second-peak can be tuned from 0.1 to 3.46 W while the third-duration ranging from 9.86 to 14.12 ns. The achievements reveal that the proposed HH-SA scheme creates effective intensity discrimination while enjoying more consistent properties. It provides more flexible transfer curve and pulse-shaping mechanism, with novel features to meet the requirements of various engineering customizations. The versatility and stability of the HH-SA device, make it highly attractive as a stable platform for studying new pulses together with nonlinear interaction dynamics in fundamental physics.

Design of Artificial Metamaterial Absorber Based on Stacking Method

A millimeter-sized artificial periodic structure material is successfully simulated, showing the characteristics of a thin geometric scale, broadband response, and high wave absorption. The periodic structural units are stacked with metal circles, notched circular rings, and the dielectric material. The design is similar to a quasi-two-dimensional planar structure and maintains the broadband while reducing the number of layers in the stack. In addition, the electromagnetic model of this microstructure is established to study its S-parameters and suction properties through the electromagnetic simulations. Numerical results reveal that when the wave is incident vertically, the absorption is over 90% in the frequency range of 14.4-14.8 GHz and 15.4-20.6 GHz. The absorber features the same absorption for different polarization states.

Large-mode-area soliton fiber oscillator mode-locked using NPE in an all-PM self-stabilized interferometer.

In this work, we investigate an approach to scale up the output pulse energy in an all-polarization-maintaining 17.3 MHz Yb-doped fiber oscillator via implementation of a 25 µm core-diameter large-mode-area fiber. The artificial saturable absorber is based on a Kerr-type linear self-stabilized fiber interferometer, enabling non-linear polarization rotation in polarization-maintaining fibers. Highly stable mode-locked steady states in the soliton-like operation regime are demonstrated with 170 mW average output power and a total output pulse energy of ∼10n J distributed between two output ports. An experimental parameter comparison with a reference oscillator constructed with 5.5 µm core-sized standard fiber components reveals an increase of pulse energy by a factor of 36 with simultaneously reduced intensity noise in the high-frequency range >100k H z.

Tunable mode-locked Tm-doped fiber laser based upon cross-phase modulation.

We demonstrate the generation of soliton and dissipative soliton in an ultrafast thulium (Tm) doped fiber laser based upon cross-phase modulation (XPM) induced mode-locking. The mode-locking is realized by periodically modulating the 2-µm signal through XPM that is activated by an injected 1.5-µm pulsed laser. Such a mechanism enables the laser to be mode-locked in various operation regimes without any real or artificial saturable absorbers. Thanks to the XPM pulling effect, the wavelength of the Tm-doped fiber laser can be tuned by adjusting the repetition frequency of the 1.5-µm pulsed laser. The maximum tuning ranges achieved in this work for the soliton and dissipative soliton regimes are respectively 11 nm and 15 nm. The outcomes of this work not only provide a continuously and controllably wavelength-tunable ultrafast laser but also offer a passively synchronized dual-color fiber laser system, which is promised for many important applications such as Raman spectroscopy, nonlinear frequency conversion systems, and multi-color pump-probe systems.

Optimal Sacrificial Domains in Mechanical Polyproteins: S. epidermidis Adhesins Are Tuned for Work Dissipation.

The opportunistic pathogen Staphylococcus epidermidis utilizes a multidomain surface adhesin protein to bind host components and adhere to tissues. While it is known that the interaction between the SdrG receptor and its fibrinopeptide target (FgB) is exceptionally mechanostable (∼2 nN), the influence of downstream B domains (B1 and B2) is unclear. Here, we studied the mechanical relationships between folded B domains and the SdrG receptor bound to FgB. We used protein engineering, single-molecule force spectroscopy (SMFS) with an atomic force microscope (AFM), and Monte Carlo simulations to understand how the mechanical properties of folded sacrificial domains, in general, can be optimally tuned to match the stability of a receptor–ligand complex. Analogous to macroscopic suspension systems, sacrificial shock absorber domains should neither be too weak nor too strong to optimally dissipate mechanical energy. We built artificial molecular shock absorber systems based on the nanobody (VHH) scaffold and studied the competition between domain unfolding and receptor unbinding. We quantitatively determined the optimal stability of shock absorbers that maximizes work dissipation on average for a given receptor and found that natural sacrificial domains from pathogenic S. epidermidis and Clostridium perfringens adhesins exhibit stabilities at or near this optimum within a specific range of loading rates. These findings demonstrate how tuning the stability of sacrificial domains in adhesive polyproteins can be used to maximize mechanical work dissipation and serve as an adhesion strategy by bacteria.

Graded-index multimode fiber in nonlinear absorbing loop mirror as saturable absorber for noise-like pulse generation in 2 μm region

This investigation explores the potential use of graded-index multimode fiber (GIMF) in a nonlinear absorbing loop mirror (NAbLM) as an artificial saturable absorber for ultrashort pulse generation. The saturable absorption mechanism of GIMF-NAbLM was based on a combination of nonlinear phase shift and multimodal interference that was satisfied by the asymmetric positioning of the GIMF in the single-mode fiber loop mirror. The proposed saturable absorber was integrated in a mode-locked thulium-doped fiber laser with figure-of-eight cavity. A noise-like pulse of 164 fs spike pulse duration at 1950 nm central wavelength was attained in the net anomalous dispersion with a 10 m long GIMF. The GIMF-NAbLM structure demonstrates immense prospects as an effective saturable absorption device for generating stable ultrashort pulse in the 2 µm region due to its simplicity.

Bound-State Soliton and Noise-like Pulse Generation in a Thulium-Doped Fiber Laser Based on a Nonlinear Optical Loop Mirror

We demonstrate a thulium-doped, mode-locked, all-fiber laser capable of operating in two generation regimes: dispersion-managed soliton and noise-like pulse (NLP). Employing a nonlinear optical loop mirror as an artificial saturable absorber, the oscillator generated optical pulses with a fundamental pulse repetition frequency of ~15.795 MHz. The total net dispersion of the laser cavity had a slightly anomalous group delay dispersion value of −0.016 ps2. After appropriate adjustment of a polarization controller, bound states of a dispersion-managed soliton composed of three pulses with fixed soliton separations were also observed. NLP generation, tunable over 35 nm from 1943.5 to 1978 nm, was also presented in the same laser setup. To our knowledge, this is the first report of the generation of tunable NLPs in a mode-locked thulium-doped fiber laser based on a nonlinear loop mirror saturable absorber.

Machine learning-assisted low-frequency and broadband sound absorber with coherently coupled weak resonances

An artificial broadband sound absorber composed of multiple components is of significant interest in the physics and engineering communities. The existence of coherently coupled weak resonances (CCWRs) makes it difficult to achieve optimal broadband sound absorption, especially in the presence of complex and aperiodic components. Here, we present and experimentally implement a machine learning-assisted subwavelength sound absorber with CCWRs using an improved Gauss–Bayesian model, which exhibits flexible, high-efficient, and broadband properties at low frequencies (<500 Hz). The proposed aperiodic structure comprises three parallel split-ring units, which enable a quasi-symmetric resonant mode to be generated and effectively dissipate energy because of the huge phase difference between each component at the coupled resonant frequency. With high algorithmic efficiency (no more than 80 iterations), the improved Gauss–Bayesian model inversely determines the optimal CCWRs, realizing a reconfigurable high sound absorption spectrum (α > 0.9) from 229 to 457 Hz. The optimal configuration of sound spectrum characteristics and the unit cell structure can be confirmed flexibly. Good agreement between numerical and experimental results verifies the effectiveness of the proposed method. To further exhibit broadband and multiparameter optimization, a nine-unit sound absorber (27 parameters) is numerically simulated and shown to achieve high acoustic absorption and a relatively broad bandwidth (44.8%). Our work lifts the restrictions on analytic models of complex and aperiodic components with coherent coupling effects, paving the way for combining machine learning with the optimal design of metamaterials.