Domain-wall dark pulse generation with SMF-GIMF-SMF structure as artificial saturable absorber

Abstract

We experimentally demonstrated the generation of domain-wall dark pulse in an Erbium-doped fiber laser using the combination of a 10 cm graded index multimode fiber sandwiched by single mode fibers as artificial saturable absorber. The interaction of phase difference in grade index multimode fiber allowed the stable dual-wavelength oscillation in the cavity. The dual-wavelength centered at 1567.2 nm and 1569.4 nm produces the topological defect in temporal domain and achieved a dark pulse formation with repetition rate of 21.5 MHz. The highest average pulse energy is calculated as 769.6 pJ with pulse width of 5 ns. Throughout the operating pump power range, the average pulse energy and output power increase linearly, with R2 of 0.9999 and achieved the laser efficiency of 9.33%. From the measurement in frequency domain, the signal-to-noise ratio is measured as 49 dB. As compared to reported DW dark pulse works, the proposed structure only required a short length of multimode fiber, which allowed the domain-wall dark pulse to achieve higher pulse repetition rate. The venture of domain wall dark pulse is potentially to pave the foundation toward sustainable industrial growth.