Articular Fossa Research Articles

Effect of maxillary molars distalization using clear aligners and fixed orthodontic appliances on the positional and dimensional temporomandibular joint parameters: a three-dimensional comparative study.

The use of clear aligners (CAs) for orthodontic treatment has substantially increased in recent decades. However, limited empirical evidence exists regarding their potential effects on the temporomandibular joint (TMJ). The aim of this study was to assess the effect of maxillary molar distalization on the positional and dimensional TMJ parameters between CAs and conventional fixed orthodontic appliances (FAs) in skeletal class II malocclusion. This is a retrospective cohort study examined 70 adult patients with skeletal class II malocclusion with similar baseline characteristics based on American Board of Orthodontics (ABO) discrepancy index scores. The patients were treated by maxillary distalization movement by CAs or FAs, of which there were two equal groups of 35 patients were included in each group. CBCTs on TMJs were performed before and after treatment through Anatomage Invivo Dental 6.0. The measured parameters included inclination, position, condyle and articular fossa dimensions, and the volumetric joint spaces. In both groups, linear measurements of the maxillary molar position revealed significant improvement after treatment (P < 0.001). Regarding TMJ parameters, intra-group comparisons revealed significant changes in FA group in the anterioposterior condylar inclination and condylar position across the three planes. Additionally, the pretreatment-centric condylar position in the glenoid fossa was 45.7% and 40% in the CA and FA groups, respectively. After treatment, these percentages changed to 51.4% and 31.4%, respectively. In inter-group comparisons, significant changes were noted in the mediolateral condylar position, which was more inward in the FA group than the CA group. The FA group had more significant dimensional and positional changes in the mandibular condyle than the CA group; nevertheless, the changes are considered clinically negligible.

Morphologic characteristics of temporomandibular joint on the patients with anterior disc displacement without osteoarthritis: a case-based research

We investigated the effect of anterior disc displacement without osteoarthritis (ADDwoOA) on the morphology of the temporomandibular joint (TMJ) utilizing three-dimensional (3D) models of 23 asymptomatic individuals and 30 ADDwoOA patients. Statistical analyses between the groups were performed by measuring 10 morphological parameters. ADDwoOA patients showed significantly decreased levels of the sagittal ramus angle (SRA) and joint spaces compared with asymptomatic subjects. Moreover, the patients who had recovered exhibited normal joint spaces levels. Consequently, ADDwoOA caused the condyles to move backward and upward, approaching the articular fossa. Joint spaces can serve as an important observation during the treatment of ADD.

The Stress Effects of Mandibular Movements on the Temporomandibular Joint With Sagittal Split Ramus Osteotomy.

The aim of this study was to evaluate the stress changes in the temporomandibular joint (TMJ) after sagittal split ramus osteotomy (SSRO) with finite element analysis (FEA). 5 and 10mm mandibular setback and advancement were applied to models by using SSRO and a control model without osteotomy evaluated. The articular disc was modeled as superelastic, and the stresses on the articular fossa, disc, and condyle were evaluated. The stresses on the cartilage were 1.150 MPa on the 5mm advancement model and 1.506 MPa on the 10mm advancement model. The stresses on the disc were 11.56 MPa on the 5mm advancement model, 7.94 MPa on the 10mm advancement model and the amount were significantly higher than other models. The stress, especially in the cartilage, increased with the amount of advancement. In the setback models, the stresses on the condylar cartilage and the disc were higher than in the control model, and the stress in the condylar cartilage increased with the amount of setback. SSRO increases the stresses in the TMJ components and stresses increase depending on the amount of advancement and setback and may cause the development of joint problems.

Three-Dimensional Evaluation of Condylar Position and Joint Spaces Following Orthodontic Treatment With Quadruple Premolar Extractions.

This study aimed to assess the alterations in the temporomandibular joint among adult patients undergoing orthodontic treatment involving the extraction of four premolars. A cohort of 44 adults, with a mean age of 24.2 years, underwent orthodontic therapy that included quadruple premolar extractions. Cone-beam computed tomography scans were performed before and after the treatment to evaluate the temporomandibular joints. The three-dimensional assessment focused on the condylar position relative to the cranial base and the articular fossa, the axial condylar rotation, and the joint spaces. Notably, a significant posterior shift of the condyle was detected (P≤0.01), averaging a 0.41mm retraction. The posterior joint space narrowed by 0.32mm post-treatment. Additionally, a medial tilt of 0.62° in the condyle's long axis was observed in the frontal plane. No significant changes were recorded for the other condylar positions, rotations, or joint space dimensions. The findings suggest that orthodontic treatment with four premolar extractions may instigate condylar repositioning and rotation. These insights can inform refinements in treatment protocols.

A comprehensive patient-specific prediction model for temporomandibular joint osteoarthritis progression

Temporomandibular joint osteoarthritis (TMJ OA) is a prevalent degenerative disease characterized by chronic pain and impaired jaw function. The complexity of TMJ OA has hindered the development of prognostic tools, posing a significant challenge in timely, patient-specific management. Addressing this gap, our research employs a comprehensive, multidimensional approach to advance TMJ OA prognostication. We conducted a prospective study with 106 subjects, 74 of whom were followed up after 2 to 3 y of conservative treatment. Central to our methodology is the development of an innovative, open-source predictive modeling framework, the Ensemble via Hierarchical Predictions through Nested cross-validation tool (EHPN). This framework synergistically integrates 18 feature selection, statistical, and machine learning methods to yield an accuracy of 0.87, with an area under the ROC curve of 0.72 and an F1 score of 0.82. Our study, beyond technical advancements, emphasizes the global impact of TMJ OA, recognizing its unique demographic occurrence. We highlight key factors influencing TMJ OA progression. Using SHAP analysis, we identified personalized prognostic predictors: lower values of headache, lower back pain, restless sleep, condyle high gray level-GL-run emphasis, articular fossa GL nonuniformity, and long-run low GL emphasis; and higher values of superior joint space, mouth opening, saliva Vascular-endothelium-growth-factor, Matrix-metalloproteinase-7, serum Epithelial-neutrophil-activating-peptide, and age indicate recovery likelihood. Our multidimensional and multimodal EHPN tool enhances clinicians' decision-making, offering a transformative translational infrastructure. The EHPN model stands as a significant contribution to precision medicine, offering a paradigm shift in the management of temporomandibular disorders and potentially influencing broader applications in personalized healthcare.

A three-dimensional imaging study of the effect of anterior disc displacement on the bony structural relationship of the temporomandibular joint

Objective: To investigate the correlation between the osseous structure of temporomandibular joint (TMJ) and three different status of anterior disc location, so that it could guide the clinical diagnosis further. Methods: Fifty-two patients [46 females and 6 males, with an age of (27.8±8.3) years] who treated with MRI and cone beam CT, were recruited from the Temporomandibular Joint Specialist Clinic, The First Affiliated Hospital of Xinjiang Medical University, between March 2018 to December 2021. According to the radiographic findings of the level of anterior disc displacement (ADD) in TMJ, patients were divided into three groups: normal articular disc position (NADP, n=28 TMJs), anterior disc displacement with reduction (ADDWR, n=28 TMJs), and anterior disc displacement without reduction (ADDWoR, n=28 TMJs). In the light of the reconstructed three-dimensional model, ten representative morphological parameters including condylar volume (CV), condylar superficial area (CSA), fossa volume (FV), fossa superficial area (FSA), the proportion of the condylar volume in the articular fossa (CV%), the proportion of the condylar superficial area in the articular fossa (CSA%), superior joint space (SJS), anterior joint space (AJS), posterior joint space (PJS), and medial joint space (MJS), were measured respectively under one-way analysis of variance (ANOVA), Kruskal-Wallis Htest and receiver operator characteristic curve(ROC curve) analyses. Results: CV and CSA values varied significantly in the pathological progression from normal location to irreversible anterior displacement in TMJ. For CV value, NADP group [(1 834.90±667.67) mm3]>ADDWR group [(1 747.34±369.42) mm3]>ADDWoR group [(1 256.29±418.27) mm3] [t=4.31, P(NADP-ADDWoR)<0.001; t=3.66, P(ADDWR-ADDWoR)<0.001], for CSA value, NADP group [(859.27±216.01) mm2]>ADDWR group [(838.23±118.82) mm2]>ADDWoR group [(669.14±150.26) mm2] [t=4.27, P(NADP-ADDWoR)<0.001; t=3.80, P(ADDWR-ADDWoR)<0.001]. The difference of SJS value in NADP group [(2.22±0.88) mm], ADDWR group [(1.94±0.64) mm] and ADDWoR group [(1.45±0.57) mm], was statistically significant [t=4.11, P(NADP-ADDWoR)<0.001; t=2.63, P(ADDWR-ADDWoR)=0.010]. The results of MJS in NADP group [(5.03±1.41) mm], ADDWR group [(3.86±1.32) mm], and ADDWoR group [(4.91±1.65) mm] were significantly different [t=3.00, P(NADP-ADDWR)=0.004; t=2.63, P(ADDWR-ADDWoR)=0.009]. As calculated by the ROC curve analysis, CV, CSA and SJS showed that (AUCCV=0.77, AUCCSA=0.76; AUCSJS=0.76) for the NADP and ADDWoR groups, and (AUCCV=0.80; AUCCSA=0.80; AUCSJS=0.72) for the ADDWR and ADDWoR groups. While the diagnostic accuracy of MJS for the comparison in NADP versus ADDWR and ADDWR versus ADDWoR was respectively AUC(NADP-ADDWR)=0.73, and AUC(ADDWR-ADDWoR)=0.69. Conclusions: CV, CSA, SJS, and MJS were significantly associated with the different disc displacement status, and the condyle in TMJ ADD exhibited three-dimensionally altered dimensions. They could be considered as promising biometric markers to diagnose the ADD status.

Correlation between temporomandibular joints and craniocervical posture in patients with bilateral anterial disc displacement

ObjectiveTo study the changes of temporomandibular joints and craniocervical posture in adult patients with bilateral anterior disc displacement, and to explore their correlation, which may provide some clinical value for clinical diagnosis and treatment planning.MethodsNinety-eight adult patients were divided into 3 groups: 29 patients in bilateral disc normal position group (BN), 33 patients in bilateral Anterior Disc Displacement With Reduction group (ADDWR) and 36 patients in bilateral Anterior Disc Displacement Without Reduction group (ADDWoR). Dolphin and Uceph software were used to measure 14 items of temporomandibular joint and 11 items of craniocervical posture for comparison and correlation analysis between groups.ResultsThere were significant differences in bilateral joint space between three groups. Compared with the BN, the anteroposterior diameter of the condyle was significantly reduced, the condyle was significantly displaced posteriorly and superiorly in the ADDWR and ADDWoR, but the joint fossa width and joint fossa depth did not change significantly. Cervical curvature and inclination were greater in patients with anterior disc displacement than BN, indicating that the craniocervical posture of adult patients with anterior disc displacement was extended and protrusive.ConclusionAnterior disc displacement of the temporomandibular joint can displace the condyle upwards and posteriorly and reduce the anteroposterior diameter of condyle, and then make the condyle closer to the wall of articular fossa to induce joint symptoms. Additionally, craniocervical postural position is significantly affected, which may be related to compensate for the effects of airway space.

Three-dimensional spatial analysis of temporomandibular joint in adolescent Class II division 1 malocclusion patients: comparison of Twin-Block and clear functional aligner

BackgroundOur study aimed to use three-dimensional (3D) spatial morphological measurement methods to compare the influence of Twin-Block and clear functional aligners on the temporomandibular joint (TMJ) of adolescent Class II division 1 malocclusion mandibular retraction patients. We also aimed to explore the similarities and differences in the effects on the TMJ upon using Twin-Block and clear functional aligner.MethodsCone-beam computed tomography (CBCT) data of 49 patients with Class II division 1 malocclusion (Twin-Block group: 24; clear functional aligner group: 25) were collected before and after functional orthodontic treatment, and a 3D model of the TMJ was reconstructed using MIMICS 21.0 software. Eighteen measurement parameters, including the anterior, superior, and posterior joint spaces, were measured and compared using the 3D model.ResultsAfter the two groups underwent functional appliance treatment, the height, volume, and surface area of the condyle, length of the mandibular ramus and mandibular length increased; The retro-displaced condyle moved to the middle position of the articular fossa, while the rest of the condylar position did not change significantly. Remodeling of the articular fossa after treatment was not evident. The superior joint space of the clear functional aligner group increased, but there was no significant change after Twin-Block appliances treatment.ConclusionsBoth appliances promote condylar growth and sagittal and vertical development of the mandible in adolescent Class II division 1 malocclusion mandibular retraction patients. The length of the mandibular ramus showed a more significant increase following treatment with the Twin-Block appliances than with clear function aligners.

Comparative evaluation of the accuracy of 3D TMJ analysis performed by different methods of processing computed tomograms

The aim of this study. Comparison of the accuracy of segmentation of TMJ elements in different ways and assessment of the suitability of the data obtained for the diagnosis of TMJ dysfunction. To study the segmentation of the bone elements of the TMJ (articular fossa, head of the LF), 60 computed tomograms of the maxillofacial region of patients were randomly selected in various ways (archival material). In group 1, the results of CT processing by AI diagnostics algorithms (Russia) were collected; in group 2, the results of CT processing based on the semi-automatic segmentation method in the Avantis3D program. The results of CT processing by Avantis3D AI algorithms (Russia) with different probability modes - 0.4 and 0.9, respectively, were selected for the third and fourth groups. Visually, the coincidence of the contours of the LF heads and articular pits isolated using different methods with their contours on all possible sections of the original CT itself was evaluated. The time spent on TMJ segmentation according to CT data was determined and compared using the methods described above. Of the 240 objects, only 7.5% of the cases showed a slight discrepancy between the contours of the original CT in group b1, which was the lowest of all. A slight discrepancy in the TMJ contours to be corrected is characteristic of the semi-automatic method of segmentation by optical density was detected in 50.4% (group 2). The largest percentage of significant errors not subject to correction was noted in the first group, which made it impossible to perform a full 3D analysis of the TMJ, and the smallest in the second and fourth. The magnitude of the error in determining the width of the articular gap in different groups is comparable to the size of one voxel per CT. When segmentation is carried out using AI, the difference between segmented objects is close to zero values. The average time spent on TMJ segmentation in group 1 was 10.2±1.23 seconds, in group 2 - 12.6±1.87 seconds, in groups 3 and 4 - 0.46±0.12 seconds and 0.46±0.13 seconds, respectively. The developed automated method for segmenting TMJ elements using AI is obviously more suitable for practical work, since it requires minimal time, and is almost as accurate as other methods under consideration.

Evaluation of Rheumatic Diseases Affecting the Temporomandibular Joint: A Cone Beam Computed Tomography Study and Literature Review.

Due to the silent manifestation of temporomandibular joint (TMJ), dentists and rheumatologists may neglect treatment for this joint. The aim of this study was to investigate the TMJ components in patients with various rheumatic diseases and to compare them with a control group based on cone beam computed tomography (CBCT) images. This study comprised an assessment of the CBCT images of 65 patients (130 temporomandibular joints) with various rheumatic diseases (mostly rheumatoid arthritis) affecting the TMJ. Moreover, 65 patients (130 temporomandibular joints) with a similar age and gender distribution were examined as the control group. Pathologies were classified into a total of 12 types for the presence of any osseous changes in the condylar head or articular fossa or for joint space narrowing. Statistical analysis of all data was performed with SPSS version 18. The conformity of continuous variables to a normal distribution was examined by the Kolmogorov-Smirnov test. The Mann-Whitney U test was used to compare the means of two independent groups. The Pearson Chi-square test, Yates correction and Fisher's exact test were used in the analysis of categorical variables. The mean age of the patient and control groups was 50 ± 13 and 48 ± 16, respectively, and no statistically significant difference was found between the patient and control groups in terms of age distribution (p = 0.123). Condylar erosion, condylar flattening, subcondylar sclerosis, osteophytes, subcortical cysts, articular eminence resorption and articular eminence flattening rates were found to be statistically significantly higher in the patient group than in the control group (p < 0.05). Dentomaxillofacial radiologists should examine the bony components of the TMJ in patients with rheumatic diseases, and a multidisciplinary approach involving a dental specialist and rheumatologist is required.

CT data analysis of temporomandibular joint morphology in patients with Open-mouth breathing

ObjectiveThis study aims to investigate the correlation between open-mouth breathing and temporomandibular joint morphology by examining CT data in patients. MethodsFrom January to December 2022, 31 patients with open-mouth breathing and 20 with normal breathing were chosen from those attending the Stomatological Hospital of Chongqing Medical University. We compared condylar measurements among normal breathers (NB), pre-operative open-mouth breathers (Pre-OB), and post-operative open-mouth breathers (Post-OB) to identify statistically significant differences. ResultsUpon comparing the measurement parameters of the NB with the Pre-OB, we found significant statistical differences in the bilateral condylar height, depth of the articular fossa, anterior joint space, and the anterior inclined plane length of the condyle (p < 0.05).Further examination of the Pre-OB, when considering duration of open-mouth breathing, revealed pronounced differences in the condylar mediolateral diameter, fossa depth, anterior joint space, condylar height, and the condyle's horizontal angle (p < 0.05).Regarding the A/N ratio, it showed no significant correlation with the preoperative oral breathing group. Lastly, compared with Pre-OB, Post-OB highlighted a distinct statistical increase in the anterior slope length of the condyle (p < 0.05). ConclusionA discernible correlation between open-mouth breathing and condylar morphology exists. Continuous open-mouth breathing contributes to adaptive changes in the condylar morphology. Although limited post-operative data suggests that halting open-mouth breathing doesn't immediately result in condylar modifications, a relationship between the two phenomena remains evident.

Designing customized temporomandibular fossa prosthesis based on envelope surface of condyle movement: validation via in silico musculoskeletal simulation.

Objective: This study presents an innovative articular fossa prosthesis generated by the envelope surface of condyle movement, and compares its mandible movements, muscle activities, and joint reaction forces with two temporomandibular joint (TMJ) prostheses using multibody musculoskeletal simulation. Methods: A healthy 23-year-old female was recruited for this study. Cone-beam computed tomographic (CBCT) was performed to reconstruct the mandibular bone geometry. A customized TMJ fossa prosthesis was designed based on the subject-specific envelope surface of condyle movement (ESCM). Mandibular kinematics and jaw-closing muscle electromyography (EMG) were simultaneously recorded during maximum jaw opening-closing movements. To validate our prosthesis design, a mandibular musculoskeletal model was established using flexible multibody dynamics and the obtained kinematics and EMG data. The Biomet fossa prosthesis and the ellipsoidal fossa prosthesis designed by imitating the lower limb prostheses were used for comparison. Simulations were performed to analyze the effects of different fossa prostheses on jaw opening-closing motions, mandibular muscle activation, and contact forces. Results: The maximum opening displacement for the envelope-based fossa prosthesis was greater than those for Biomet and ellipsoidal prostheses (36mm, 35mm, and 33mm, respectively). The mandibular musculoskeletal model with ellipsoidal prosthesis led to dislocation near maximal jaw opening. Compared to Biomet, the envelope-based fossa reduced the digastric and lateral pterygoid activation at maximal jaw opening. It also reduced the maximal resistance to condylar sliding on the intact side by 63.2N. Conclusion: A customized TMJ fossa prosthesis was successfully developed using the ESCM concept. Our study of musculoskeletal multibody modeling has highlighted its advantages and potential. The artificial fossa design successfully achieved a wider condylar range of motion. It also reduced the activation of jaw opening muscles on the affected side and resistance on the intact side. This study showed that an ESCM-based approach may be useful for optimizing TMJ fossa prostheses design.

Condylar Positional Changes in Skeletal Class II and Class III Malocclusions after Bimaxillary Orthognathic Surgery.

Orthognathic surgery is indicated to modify the position of the maxillomandibular structure; changes in the mandibular position after osteotomy can be related to changes in the position of the mandibular condyle in the articular fossa. The aim of this study was to determine changes produced in the mandibular condyle 6 months after orthognathic surgery. A cross-sectional study was conducted that included subjects who had undergone bimaxillary orthognathic surgery to treat dentofacial deformity of Angle class II (group CII) or Angle class III (group CIII). Standardized images were taken using cone-beam computed tomography 21 days before surgery and 6 months after surgery; measurement scales were used to identify the condylar position and its relations with the anterior, superior, and posterior joint spaces. The results were analyzed using the Shapiro-Wilk and Student's t-tests, while considering a value of p < 0.05 as indicating a significant difference. Fifty-two joints from 26 patients, with an average age of 27.9 years (±10.81), were analyzed. All subjects in both group CII and group CIII showed a significant change in the anterior, superior, and posterior joint spaces. However, postoperative changes in the position of the condyle in the articular fossa were not significant in the anteroposterior analysis. We conclude that orthognathic surgery causes changes in the sagittal position of the mandibular condyle in subjects with mandibular retrognathism and prognathism.

Model test study on treatment of Pruzansky type ⅡB and Ⅲ hemifacial microsomia with artificial condyle-mandibular distractor complex

To preliminarily verify the effectiveness of self-designed artificial condyle-mandibular distraction (AC-MD) complex in the treatment of Pruzansky type ⅡB and Ⅲ hemifacial microsomia (HFM) through model test. Five children with Pruzansky type ⅡB and Ⅲ HFM who were treated with mandibular distraction osteogenesis (MDO) between December 2016 and December 2021 were selected as the subjects. There were 3 boys and 2 girls wih an average age of 8.4 years (range, 6-10 years). Virtual surgery and model test of AC-MD complex were performed according to preoperative skull CT of children. The model was obtained by three-dimensional (3D) printing according to the children's CT data at a ratio of 1∶1. The occlusal guide plate was designed and 3D printed according to the children's toothpaste model. The results of the model test and the virtual surgery were matched in three dimensions to calculate the error of the residual condyle on the affected side, and the model test was matched with the actual skull CT after MDO to measure and compare the inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible. The error of residual condyle was (1.07±0.78) mm. The inclination rotation of the mandible, the distance between the condylar of the healthy side and the residual condyle of the affected side, and the lengthening length of the mandible after 3D printing model test were significantly larger than those after MDO ( P<0.05). In the model test, the implantation of AC-MD complex can immediately rotate the mandible to the horizontal position and improve facial symmetry, and the residual condyle segment can be guided close to the articular fossa or the preset pseudoarticular position of the skull base after operation.

Imaging features of temporomandibular joint synovial chondromatosis with associated osseous degenerative changes

Synovial chondromatosis (SC) of the temporomandibular joint (TMJ) is a rare benign disease associated with the formation of multiple cartilaginous nodules in the synovial tissue of the TMJ. This can result in pain, swelling, clicking, limited mouth opening, and osseous degenerative joint changes. A retrospective cross-sectional study was performed to summarize the clinical features, radiographic findings, and surgical and histopathological findings of TMJ SC patients who underwent open surgery over a 24-year period. A radiographic scoring system was used to evaluate osseous changes and correlate condyle and joint fossa degeneration. The study included 38 patients and focused on 38 joints. All 38 of these joints showed degenerative changes in the condyle, while 37 showed osseous degenerative changes in the articular fossa. The degree of condylar degenerative changes was related to the duration of the chief complaints (r = 0.342, P = 0.036) and the histopathological stage of the TMJ SC (r = 0.440, P = 0.006), while the degree of joint fossa degenerative changes was associated with the radiographic extent of the SC (r = 0.504, P = 0.001), type of calcification (r = 0.365, P = 0.024), and the histopathological stage (r = 0.458, P = 0.004).

A 3D reconstruction imaging study of the effect of anterior disk displacement on the bony structural relationship of the temporomandibular joint

ABSTRACT Background: The objective of this study was to measure the association between the status of anterior disk displacement (ADD) and the alterations of the mandibular condyle and articular fossa among patients diagnosed with temporomandibular joint (TMJ) ADD. Patients and Methods: A retrospective cross sectional study was designed, dividing into 4 groups: normal articular disk position (NADP) of unilateral ADD patients (n = 10), ADD with reduction (ADDwR, n = 16), ADD without reduction (ADDwoR, n = 24), and healthy volunteers (HV, n = 30) based on magnetic resonance imaging and cone beam computed tomography. After morphological parameters were calculated from three dimensional reconstructive images, differences in parameters with respect to TMJ ADD status were tested with analysis of variance and Fisher's least significant difference multiple comparisons were performed. Results: Patients were with a female to male ratio of 6.75:1 (21 females, 4 males) and an average age of 29.10 ± 8.94 years (ranging from 16 to 51). Condylar volume (CV) of the ADDwR, ADDwoR, NADP, and HVs was 1768.29 ± 404.19 mm, 1467.13 ± 438.20 mm, 1814.48 ± 753.60 mm, and 1914.66 ± 476.48 mm, respectively, showing a significant downward trend from healthy disk to a displaced one (P &lt; 0.05). The same trend also found in condylar superficial area (CSA), with the CSA of the ADDwR, ADDwoR, NADP, and HVs, was 842.56 ± 138.78 mm, 748.52 ± 157.42 mm, 842.87 ± 263.00 mm, and 892.73 ± 164.19 mm, respectively. From NADP to ADDwR to ADDwoR, superior joint space (SJS) was declined (SJS [NADP] [2.10 ± 0.91 mm] &gt; SJS (ADDwR) [1.85 ± 0.61 mm] &gt; SJS [ADDwoR] [1.50 ± 0.50 mm], P = 0.034); medial joint space (MJS) was significantly associated with the different disk displacement types (P [HV ADDwR] = 0.001; P [HV ADDwoR] = 0.021; P [NADP ADDwR] = 0.022; P [ADDwR ADDwoR] = 0.001). Conclusion: The CV and superficial area and superior and MJS are significantly associated with different disk displacement types. The mandibular condyle and articular fossa in TMJ ADD exhibited altered dimensions. These could be promising biometric markers for assessing ADD.

Changes of Temporomandibular Joint Morphology and Symptoms in Class II Malocclusion Patients With Bilateral Sagittal Split Ramous Osteotomy.

This study included 46 patients with class II malocclusion ranging in age from 19 to 39 years old treated with bilateral sagittal split ramous osteotomy (BSSRO). Left and right temporomandibular joints (TMJs) of each subject were evaluated independently with cone-beam computed tomography (CBCT) before operation (T1), 1 week after operation (T2), and 1 year after operation (T3) and assessed the effects of orthognathic surgery (OGS) on the temporomandibular joint disease (TMD) symptoms. Temporomandibular joint morphology evaluation included condylar volume, condylar area, cortical bone thickness, depth of the mandibular fossa, fossa thickness, joint nodule angle, joint space, and condyle-fossa relationship, which were calculated by using the Mimics software and 3-matic software. Data were statistically analyzed with SPSS software (P <0.05 means statistically significant). In our study, bilateral TMJs have no difference in T3. Bilateral sagittal split ramous osteotomy had no significant effect on the articular fossa. The condyle volume and surface area decreased from T1 to T3, but the cortical thickness of the bone did not change significantly. More anterior condyle positions in T1 and more posterior in T3.21 patients had at least 1 sign or symptom of TMD in T1 and 27 patients in T3. Four patients who were asymptomatic in T1 developed pain after surgery, 10 developed noises, 12 showed limited mouth opening, and 8 had abnormal opening patterns. It is concluded that more condylar posterior position after BSSRO and the reduction of condyle may be related to the enlargement of anterior space. The number of patients with joint symptoms increased postoperative, and the impact of BSSRO on TMD may be negative.

Impact of molar teeth distalization by clear aligners on temporomandibular joint: a three-dimensional study

BackgroundMaxillary molar distalization is a common technique used in the non-extraction treatment of Angle Class II malocclusion that can effectively correct the molar relationship and create spaces for anterior teeth alignment. However, this approach may also impact the temporomandibular joint (TMJ) due to predictable changes in the posterior vertical dimension. Despite its widespread use, Class II malocclusions correction by molar distalization with clear aligners has not been investigated for their effects on the TMJ. Therefore, this study aimed to analyze the impact of sequential molar distalization using clear aligners on the TMJ.MethodsThree-dimensional CBCT scans of 23 non-growing patients (7 males, 16 females; mean age 29.8 ± 4.6 years) with skeletal class I or II malocclusion and a bilateral molar class II relationship treated by sequential upper molars distalization with orthodontic clear aligners (Invisalign, Align Technology, San Josè, Ca, USA). A total of 46 joints were examined before and after molar distalization using Anatomage InvivoDental 6.0.3. Linear and angular measurements of the mandibular joint were measured, including joint parameters, inclination, position, and the dimension of the condyle and articular fossa. In addition, 3D volumetric spaces of the joint were analyzed. All data were statistically analyzed by paired T test to determine the differences between the pre-and post-orthodontic procedures.ResultsNo statistically significant differences were found in all primary effects resulting from maxillary molars distalization by clear aligners on TMJ components measurements and joint spaces between T0 and T1. Meanwhile, statistically significant differences were observed in the linear position of the upper molars and the molar relationship parameter with at least P ≤ 0.05.ConclusionTreatment by sequential upper molars distalization with clear aligners does not lead to significant TMJ parameters changes in condyle and fossa spaces, dimensions, and positions.

Differences of temporomandibular joint symmetry in patients with unilateral complete cleft lip and palate at different developmental stages.

Currently, the research results regarding the bilateral temporomandibular joint symmetry in patients at different ages with unilateral complete cleft lip and palate (UCLP) are still controversial. In this study, the position of condyle in the articular fossa and morphology of condyle in UCLP patients at different developmental stages was measured and analyzed to explore the asymmetry difference, which can provide a new theoretical basis for the sequential therapy. A total of 90 patients with UCLP were divided into a mixed dentition group (31 cases), a young permanent dentition group (31 cases) and an old permanent dentition group (28 cases) according to age and dentition development. Cone beam computed tomography (CBCT) images were imported into Invivo5 software for 3D reconstruction, and the joint space, anteroposterior diameter, medio-lateral diameter, and height of condylar were measured, and its asymmetry index was calculated. The asymmetry index of condylar height and anteroposterior diameter among the 3 groups, from small to large, was the mixed dentition group<the young permanent dentition group<the old permanent dentition group (both P<0.05). There was no significant difference in condylar anteroposterior diameter and asymmetry index between the mixed dentition group and the young permanent dentition group (both P>0.05), all of them were lower than those in the old permanent dentition group (both P<0.05). Compared with the normal side, the height of fracture condyle was smaller among the 3 groups (all P<0.05), and the anterior joint space was smaller (P<0.05) and the posterior joint space was larger (P<0.05) in the mixed dentition group. In patients with UCLP, the asymmetry of condylar morphology increases with age, but the condylar position tends to normal. These results suggest that early treatment has important clinical significance for the morphologic development of temporomandibular joint in UCLP patients.

Impact of bruxism on craniomandibular morphology: A cone-beam computed tomographic study

ABSTRACT Objective The main goal of this work was to address craniomorphological characteristics of patients with bruxism when compared to those without bruxism using cone beam computed tomography (CBCT) imaging. Methods Seventy CBCT images of an equal number (n = 35) of orthodontic patients with and without bruxism (age range, 18–44 years) were retrospectively analyzed. Sagittal evaluation, mandibular shape, and skeletal asymmetry were systematically assessed in both groups. Results Significant differences (p < 0.05) were observed between groups for Right Articular Fossa (AF) – Axial Plane (AP) and Left AF – AP (B > NB), Right Gonial Angle (GA), Left GA, Sella-Nasion and Occlusal Plane (B < NB). Age (13%), Condyle-Gonion (18%), AF to AP (67%), and Mental-AP (16%) had the greatest impact on bruxers. Conclusion In this study, the CBCT 3D image showed significant differences in craniofacial morphology, particularly in the mandibular structure of bruxers compared with non-bruxers.