Heterostructure Arrays Research Articles

Coaxially Bi/ZnO@ZnSe Array Photocathode Enables Highly Efficient CO2 to C1 Conversion via Long-lived High-energy Photoelectrons.

The key aspect of the photoelectrochemical CO2 reduction reaction (PEC CO2 RR) lies in designing cathode materials that can generate high-energy photoelectrons, enabling the activation and conversion of CO2 into high-value products. In this study, a coaxially wrapped ZnO@ZnSe array heterostructure was synthesized using a simple anion exchange strategy and metallic Bi nanoparticles (NPs) were subsequently deposited on the surface to construct a Bi/ZnO@ZnSe photocathode with high CO2 conversion capability. This array photocathode possesses a large aspect ratio, which simultaneously satisfies a low charge carrier migration path and a large specific surface area that facilitates mass transfer. Additionally, the barrier formed at the n-n heterojunction interface hinders the transfer of high-energy photoelectrons from ZnSe to lower energy levels, resulting in their rapid capture by Bi while maintaining a relatively long lifetime. These captured electrons act as active sites, efficiently converting CO2 into CO with a Faradaic efficiency above 88.9 % at -0.9 V vs. RHE and demonstrating superior stability. This work provides a novel approach for synthesizing high-energy photoelectrode materials with long lifetimes.

Hierarchical Flower Array NiCoOOH@CoLa‐LDH Nanosheets for High‐Performance Supercapacitor and Alkaline Zn Battery

AbstractNickel oxyhydroxide based energy storage materials have been largely confined by insufficient exposure of active sites which results in low energy efficiency and poor stability. In order to resolve the problems, hierarchical flower array heterostructure NiCoOOH@CoLa‐LDH (denoted as NC@CL) nanosheets are designed with NiCo oxyhydroxide (NiCoOOH, denoted as NC) being tightly covered on CoLa layered double hydroxide (CoLa‐LDH, denoted as CL) nanosheet. This rational design creates more active sites, enlarges the electrode‐electrolyte contact area, improves electron conductivity, and prevents agglomeration during the cycling charge–discharge processes. Density functional theory calculations and differential charges concurrently illustrate that heterostructure formation optimizes the reaction kinetics and promotes electron redistribution. Benefiting from the heterogeneous structure and rich electro‐active sites caused by NC, NC@CL displays outstanding reversible specific capacitance (3228 F g−1 at 1 A g−1). The aqueous rechargeable alkaline Zn battery NC@CL//Zn exhibits a high capacity of 381.1 mA h g−1 at 0.5 A g−1 and cycling durability (98% capacity retention after cycling at 5 A g−1 for 2000 cycles). The excellent electrochemical performances indicate that NC@CL has great application potential as electrode material for aqueous energy storage device.

Laser Construction TiOx-Ag heterostructure interface for high sensitive coupling resonance enhanced fluorescence in bacterial nucleic acid amplification sensor chip

Coupled resonance at the noble metals and metal oxides heterogeneous interface can enhance the fluorescence of molecules. This fascinating direction provides high value for the preparation and engineering design of fluorescence sensing platforms in nucleic acid sensing, pathogen detection and biological imaging. Here, an integrated nucleic acid amplification sensor chip consists of an array of silver nanoparticles/oxygen vacancy titanium oxide (TiOx-Ag) heterostructure substrates. The femA gene of Staphylococcus aureus was amplified and detected by enhancement fluorescence on the integrated chip. The TiOx-Ag heterostructure array was prepared by a laser method, the enhanced fluorescence performance was investigated in detail using calcein as a probe. The optical, electronic structure and plasmonic local field analysis indicate the strong coupling between the fluorescence molecule and the TiOx-Ag crystal plane, which inspired the excellent fluorescence signal of calcein, with an enhancement factor of up to 5. Staphylococcus aureus was detected by the above chip with a detection limit as low as 157 cfu/mL. These methods were applied to the detection of spiked serum samples with good detected performances, providing a powerful tool for rapid and reliable diagnosis of pathogens in medical institutions.

Complementary Multisite Turnover Catalysis toward Superefficient Bifunctional Seawater Splitting at Ampere-Level Current Density.

The utilization of seawater for hydrogen production via water splitting is increasingly recognized as a promising avenue for the future. The key dilemma for seawater electrolysis is the incompatibility of superior hydrogen- and oxygen-evolving activities at ampere-scale current densities for both cathodic and anodic catalysts, thus leading to large electric power consumption of overall seawater splitting. Here, in situ construction of Fe4N/Co3N/MoO2 heterostructure arrays anchoring on metallic nickel nitride surface with multilevel collaborative catalytic interfaces and abundant multifunctional metal sites is reported, which serves as a robust bifunctional catalyst for alkaline freshwater/seawater splitting at ampere-level current density. Operando Raman and X-ray photoelectron spectroscopic studies combined with density functional theory calculations corroborate that Mo and Co/Fe sites situated on the Fe4N/Co3N/MoO2 multilevel interfaces optimize the reaction pathway and coordination environment to enhance water adsorption/dissociation, hydrogen adsorption, and oxygen-containing intermediate adsorption, thus cooperatively expediting hydrogen/oxygen evolution reactions in base. Inspiringly, this electrocatalyst can substantially ameliorate overall freshwater/seawater splitting at 1000mA cm-2 with low cell voltages of 1.65/1.69V, along with superb long-term stability at 500-1500mA cm-2 for over 200 h, outperforming nearly all the ever-reported non-noble electrocatalysts for freshwater/seawater electrolysis. This work offers a viable approach to design high-performance bifunctional catalysts for seawater splitting.

Positively charged 3-D interface mediated electrostatic adsorption of microorganisms for enhanced photocatalytic disinfection

Photocatalysis offers a sustainable method for disinfecting natural drinking water. However, the photoactive species generated at the catalyst interface face challenges in migrating over long distances in water to interact with bacteria. In this study, we introduce an enhanced photocatalytic disinfection strategy involves the in-situ growth of fluorine-modified titanium dioxide heterostructure arrays on carbon fibers. This method results in a positively charged photocatalytic fabric that effectively attracts negatively charged microbes to its surface, significantly reducing the mass-transfer distance of active species. The heterophase junction between rutile nanorods and anatase nanoparticles enhances charge separation efficiency, while fluorine doping in anatase nanoparticles creates a positively charged 3-D interface conducive to electrostatic adsorption and in-situ oxidation of microorganisms. When tested in actual rainwater, this photocatalytic fabric successfully reduced the bacterial count from 4500 CFU/mL to below the WHO drinking water standard of 100 CFU/mL over three cycles in a single day under natural sunlight.

A Self-Amplified Near-Infrared Bipolar Phototransistor With a PbSe Nanoband Array Heterostructure for Pharmaceutical Solute Detection

A Self-Amplified Near-Infrared Bipolar Phototransistor With a PbSe Nanoband Array Heterostructure for Pharmaceutical Solute Detection

Hierarchical NiCo2O4 needle-like heterostructure arrays anchored on WO3 as high- performance asymmetric supercapacitors for energy storage applications

The current work employs a novel approach to construct a composite nanostructure to improve the capacitive performance of a supercapacitor device. The work involved preparing cube-shaped WO3 particles and depositing them onto the surface of NiCo2O4 needles using a microwave technique. The structure of the composites enables efficient paths for ion transport and electron diffusion in supercapacitors. The hybrid composite electrode demonstrates a specific capacitance of 716 F g−1 at a current density of 5 Ag−1. The asymmetric capacitor device, which utilizes NiCo2O4@WO3 as the positive electrode and AC as the negative electrode, exhibits an energy density of 48.57 Wh kg−1 at a power density of 1120 W kg−1. In addition, the NiCo2O4@WO3//AC device has a favourable cycle life, maintaining 85.7 % of its capacitance retention after 10,000 cycles. The findings demonstrate the potential of NiCo2O4@WO3//AC to be used in the development of advanced hybrid electrodes for improved supercapacitors.

High-current-density PB@S-NiCo nanorod array catalyst for urea-assisted water splitting

To alleviate severe environmental and energy pressures, urea oxidation reaction (UOR) was frequently studied as an alternative electrochemical hydrogen production anode reaction for its low theoretical voltage. Herein, a series of self-supported UOR catalysts were synthesized on the combination of PB nanoparticles and sulfur doped NiCoCO3(OH)2 nanorod arrays (PB@S-NiCo NRA) on copper foam. By changing the modifying time of S-NiCo NRA precursor in K3[Fe(CN)6] solution, PB@S-NiCo-X (X=10, 60, 120 for reaction time) were obtained. The highly hydrophilic heterostructure array can adjust the interface electronic structure and accelerate the mass transfer process, thereby optimizing the thermal/kinetic dynamics of urea electrolysis hydrogen production. Over the typical PB@S-NiCo-60 catalyst, only 1.48 V (UOR) and 1.83 V (overall urea electrolysis) were required to drive a large current density of 500 mA cm−2, showing excellent electrocatalytic activities of the composite catalysts. Furthermore, PB component in the composite catalyst enhanced the reaction kinetics to achieve good stability at high current densities. This study provides new ideas for durable urea electrolysis-assisted H2 production.

Dual-ligand Eu-MOF/CuS@Au Heterostructure Array-based ECL Sensor for MiRNA-128 Detection in Glioblastoma Tissues

In this work, the dual-ligand lanthanide metal-organic framework (MOF)-based electrochemiluminescence (ECL) sensor was constructed for the detection of miRNA-128 in glioblastoma (GBM) diagnosis. The luminescent Eu-MOF (EuBBN) was synthesized with terephthalic acid (BDC) and 2-amino terephthalic acid (BDC-NH2) as dual-ligand. Due to the antenna effect, EuBBN with conjugated-π structure exhibited strong luminescent signal and high quantum efficiency, which can be employed as ECL nanoprobe. Furthermore, the novel plasmonic CuS@Au heterostructure array has been prepared. The localized surface plasmon resonance coupling effect of the CuS@Au heterostructure array can amplify the ECL signal of EuBBN significantly. The EuBBN/CuS@Au heterostructure array-based sensing system has been prepared for the detection of miRNA-128 with a wide linear range from 1 fM to 1 nM and a detection limit of 0.24 fM. Finally, miRNA-128 in the clinic GBM tissue sample has been analysis for the distinguish of tumor grade successfully. The results demonstrated that the dual-ligand MOF/CuS@Au heterostructure array-based ECL sensor can provide important support for the development of GBM diagnosis.

Solid-State Anion Exchange Enabled by Pluggable vdW Assembly for In Situ Halide Manipulation in Perovskite Monocrystalline Film.

The fabrication of perovskite single crystal-based optoelectronics with improved performance is largely hindered by limited processing techniques. Particularly, the local halide composition manipulation, which dominates the bandgap and thus the formation of heterostructures and emission of multiple-wavelength light, is realized via prevalent liquid- or gas-phase anion exchange with the utilization of lithography, while the monocrystalline nature is sacrificed due to polycrystalline transition in exchange with massive defects emerging, impeding carrier separation and transportation. Thus, a damage-free and lithography-free solid-state anion exchange strategy, aiming at in situ halide manipulation in perovskite monocrystalline film, is developed. Typically, CsPbCl3 working as medium to deliver halide is van der Waals (vdW) assembled to specific spots of CsPbBr3, followed by the removal of CsPbCl3 after anion exchange, with the halide composition in contact area modulated and monocrystalline nature of CsPbBr3 preserved. CsPbBr3-CsPbBrxCl3-x monocrystalline heterostructure has been achieved without lithography. Device based on the heterostructure shows apparent rectification behavior and improved photo-response rate. Heterostructure arrays can also be constructed with customized medium crystal. Furthermore, the halide composition can be accurately tuned to enable full coverage of visible spectra. The solid-state exchange enriches the toolbox for processing vulnerable perovskite and paves the way for the integration of monocrystalline perovskite optoelectronics.

3D hierarchical flowerball-like CoSe2/MnSe nanosheet arrays as a novel electrode for electrochemical sensing of hydrazine

Hydrazine (N2H4) is considered to be a highly toxic substance harmful to human body and environment, and has received much attention in the field of electrochemical detection in recent years. In this study, 3D hierarchical flowerball-like CoSe2/MnSe nanosheet arrays (CoSe2/MnSe FNSAs) were obtained using CoMn-LDH as precursor and cobalt glycerate spheres as the sacrificial template by simple hydrothermal reaction and selenization method. Bimetal selenides have more active electrochemical activity and more abundant electrochemical redox reactions. The unique hierarchical flowerball-like nanosheet array heterostructure can accelerate ionic diffusion kinetics and improve electron transfer. As a hydrazine electrochemical sensor, CoSe2/MnSe FNSAs exhibits excellent electrocatalytic performance with a wide detection range of 0.001–7.45 mM and a low detection limit of 0.4 μM. This strategy provides a new choice for the detection of environmental organic pollutants.

Designing core-shell heterostructure arrays based on snowflake NiCoFe-LTH shelled over W2N-WC nanowires as an advanced bi-functional electrocatalyst for boosting alkaline water/seawater electrolysis

The pursuit of efficient and sustainable hydrogen production through water splitting has led to intensive research in the field of electrocatalysis. However, the impediment posed by sluggish reaction kinetics has served as a significant barrier. This challenge has inspired the development of electrocatalysts characterized by high activity, abundance in earth's resources, and long-term stability. In addressing this obstacle, it is imperative to meticulously fine-tune the structure, morphology, and electronic state of electrocatalysts. By systematically manipulating these key parameters, the full potential of electrocatalysts can unleash, enhancing their catalytic activity and overall performance. Hence in this study, a novel heterostructure is designed, showcasing core–shell architectures achieved by covering W2N-WC nanowire arrays with tri-metallic Nickel-Cobalt-Iron layered triple hydroxide nanosheets on carbon felt support (NiCoFe-LTH/W2N-WC/CF). By integrating the different virtue such as binder free electrode design, synergistic effect between different components, core–shell structural advantages, high exposed active sites, high electrical conductivity and heterostructure design, NiCoFe-LTH/W2N-WC/CF demonstrates striking catalytic performances under alkaline conditions. The substantiation of all the mentioned advantages has been validated through electrochemical data in this study. According to these results NiCoFe-LTH/W2N-WC/CF achieves a current density of 10 mA cm−2 needs overpotential values of 101 mV for HER and 206 mV for OER, respectively. Moreover, as a bi-functional electrocatalyst for overall water splitting, a two-electrode device needs a voltage of 1.543 V and 1.569 V to reach a current density of 10 mA cm−2 for alkaline water and alkaline seawater electrolysis, respectively. Briefly, this research with attempting to combination of different factors try to present a promising stride towards advancing bi-functional catalytic activity with tailored architectures for practical green hydrogen production via electrochemical water splitting process.

Large-area growth of synaptic heterostructure arrays for integrated neuromorphic visual perception chips

Two-dimensional (2D) metal chalcogenides have garnered significant attention as promising candidates for novel neuromorphic synaptic devices due to their exceptional structural and optoelectronic properties. However, achieving large-scale integration and practical applications of synaptic chips has proven challenging due to significant hurdles in materials preparation and the absence of effective nanofabrication techniques. In a recent breakthrough, we introduced a revolutionary allopatric defect-modulated Fe7S8@MoS2 synaptic heterostructure, which demonstrated remarkable optoelectronic synaptic response capabilities. Building upon this achievement, our current study takes a step further by presenting a sulfurization-seeding synergetic growth strategy, enabling the large-scale and arrayed preparation of Fe7S8@MoS2 heterostructures. Moreover, we developed a 3D vertical integration technique for the fabrication of arrayed optoelectronic synaptic chips. Notably, we have successfully simulated the visual persistence function of the human eye using our arrayed chip. Our synaptic devices exhibit a remarkable ability to replicate the preprocessing functions of the human visual system, resulting in significantly improved noise reduction and image recognition efficiency. This study might mark an important milestone in advancing the field of optoelectronic synaptic devices, significantly prompting the development of mature integrated visual perception chips.

Dense Ni(OH)2 nanoparticles loaded CuMoO4 nanocube heterostructure array: An efficient electrocatalyst for hydrogen evolution

Designing ultrahigh energy density and mass-loading of electrocatalysts for hydrogen evolution is highly desirable but remains a great challenge. Herein, a 3D high-rise architectural structure consisting of dense Ni(OH)2 nanoparticles on CuMoO4 nanocube heterostructure arrays on Ni foam (Ni(OH)2/CuMoO4/NF) is developed via a hydrothermal reaction, calcination and electrodeposition method. Benefitting from the optimized electronic configuration, hierarchical high-rise architecture, and large specific surface area and mesoporous, the Ni(OH)2/CuMoO4/NF exhibits superior hydrogen evolution reaction (HER) activity in 1.0 M KOH solution. Ni(OH)2/CuMoO4/NF only requires low overpotential of 70 mV achieving a current density of 10 mA cm−2 with a low Tafel slope of 80 mV dec−1, and superior long-term stability toward HER. This work provides a new structural design to high-rise architectural structures for efficient catalytic application.

In situ fast self-assembled preparation of dandelion-like Cu(OH)2@Cu3(HHTP)2 with core–shell heterostructure arrays for electrochemical sensing of formaldehyde in food samples

Formaldehyde is known to harm the respiratory, nervous, and digestive systems of people. In this paper, a novel dandelion-like electrocatalyst with core–shell heterostructure arrays were fast self-assembled prepared in situ using copper foam (CF) as support substrate and 2,3,6,7,10,11 hexahydroxy-triphenyl (HHTP) as ligand (Cu(OH)2@Cu3(HHTP)2/CF) by a simple two-step hydrothermal reaction. The 1D Cu(OH)2 nanorods “core” and the 2D π-conjugated conducting metal–organic frameworks (Cu3(HHTP)2cMOF) “shell” with remote delocalized electrons give the dandelion-like heterogeneous catalysts excellent electrochemical activity such as a large specific surface area, high conductivity and a fast electron transfer rate. The Cu(OH)2@Cu3(HHTP)2/CF exhibited excellent electrocatalytic performance for formaldehyde under alkaline conditions with a linear range of 0.2 μmol/L – 125 μmol/L and 125 μmol/L – 8 mmol/L, a detection limit as low as 15.9 nmol/L (S/N = 3), as well as good accuracy, consistency, and durability, and it effectively identified FA in food.

Controlled Preparation of High Quality Bubble-Free and Uniform Conducting Interfaces of Vertical van der Waals Heterostructures of Arrays.

Sharp and clean interfaces of van der Waals (vdW) heterostructures are highly demanded in two-dimensional (2D) materials-based devices. However, current assembly methods usually cause interfacial bubbles and wrinkles, hindering carrier interlayer transport. The preparation of a large-scale vdW heterostructure with a bubble-free interface is still a challenge. Although many efforts have been made to eliminate bubbles, the evolution processes of the interfacial bubbles are rarely studied. Here, the interface bubble formation and evolution of the transferred 2D materials and their vdW heterostructure are systemically studied by the atomic force microscopy (AFM) technique and high-resolution surface current mapping. A thermal annealing procedure is developed to reduce the number of bubbles and to improve the quality of interfaces. In addition, influences of the interface residues and nanosteps on bubble evolution are also discussed. Further, we develop the polystyrene (PS)-mediated polydimethylsiloxane (PDMS) transfer technique to realize the high-quality transfer of heterostructure arrays. Finally, high-resolution surface current mapping results confirm that we can now produce highly uniform electrical conduction interfaces of heterojunctions. This study provides guidance for assembling high quality interfaces and paves the way for production of bubble-free heterostructure-based electronic devices with high performance and good uniformity.

Design and construction of hollow metal sulfide/selenide core-shell heterostructure arrays for hybrid supercapacitor.

Transition metal sulfides and selenides are common electrode materials in supercapacitors. However, the slow redox kinetics and structural collapse during charge-discharge cycles of single-component materials have impeded their electrochemical performance. In this study, hollow Co9S8 nanotubes were synthesized through a rational morphology design approach. Subsequently, NiSe2 or Co0.85Se was electrodeposited onto the Co9S8 nanotubes, yielding two core-shell heterostructure arrays, namely, NiSe2@Co9S8 and Co0.85Se@Co9S8. By fully leveraging the advantages and synergistic effects of these dual-phase heterostructures, the NiSe2@Co9S8 and Co0.85Se@Co9S8 configurations demonstrated outstanding areal capacitances of 12.54 F cm-2 and 9.61 F cm-2, respectively, at 2 mA cm-2. When integrated with activated carbon in hybrid supercapacitors, the NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC devices exhibited excellent energy storage performance, with energy densities of 0.959 mW h at 1.681 mW and 0.745 mW h at 1.569 mW, respectively. Additionally, these hybrid supercapacitors demonstrated remarkable cycling stability, with capacitance retention of 87.5% and 89.5% after 5000 cycles for NiSe2@Co9S8//AC and Co0.85Se@Co9S8//AC, respectively. This study provides a novel approach to the synthesis of multiphase core-shell heterostructures based on metal sulfides and selenides, opening new avenues for future research.

One-step hydrothermal synthesis of a Ni3S2-FeMoO4 nanowire-nanosheet heterostructure array for synergistically boosted oxygen evolution reaction.

A key factor for boosting oxygen evolution reaction (OER) is the design of heterostructures with steerable defects and interfaces, which can optimize the surface electronic structures and achieve efficient water splitting to produce hydrogen fuel. Herein, we propose a novel one-step hydrothermal approach to fabricate hierarchical Ni3S2 nanowires with an S-doped FeMoO4 nanosheet heterostructure array in situ on Ni-Fe foam (NFF) as a self-standing electrode for synergistically boosted OER. The metalloid Ni3S2 nanowires with good conductivity support the FeMoO4 nanosheets and act as high-speed paths for the charge transfer. Numerous ultrathin S-doped FeMoO4 nanosheets are uniformly distributed on each Ni3S2 nanowire to form heterostructures with larger specific surface area and more revealable active sites, and a strong synergistic effect is created at the heterostructure interfaces to further promote the OER dynamics. Additionally, the NFF serves as the conductive support substrate and simultaneously provides the Ni and Fe sources for the self-growing Ni3S2-FeMoO4, leading to a structurally-integrated electrode with low contact resistance, fast mass transfer, and good stability. Therefore, the Ni3S2-FeMoO4/NFF electrode offers a low overpotential of 331 mV to achieve 500 mA cm-2 and long-term stability at 100 mA cm-2 level for more than 40 h. This work provides insight into the heterostructure of molybdate and sulfide, and a deep understanding of the significance of the synergism in OER operation.

Crystalline Ni5P4/amorphous CePO4 core/shell heterostructure arrays for highly-efficient electrocatalytic overall water splitting

Exploring low-cost and highly efficient bifunctional electrocatalysts for overall water splitting has become a research focus recently. Crystalline/amorphous core/shell heterostructures have great potential for applications in the field of electrocatalytic overall water splitting. However, related research is still challenging. Herein, crystalline Ni5P4 nanosheets/amorphous CePO4 nanocrystals core/shell heterostructure arrays were developed for electrocatalytic overall water splitting. It is shown that the heterostructure array required competitive HER and OER overpotentials of 94 and 191 mV in alkaline environment (10 mA/cm2), respectively. Encouragingly, the symmetrical two-electrode system constructed with the heterostructure array only required an ultra-low cell voltage of 1.535 V to achieve a current density of 10 mA/cm2. This indicates the system has huge potential in overall water splitting. The electrocatalytic mechanism was studied systematically by combining theoretical calculation and experimental characterization. It was found that the surface coating of amorphous CePO4 could not only significantly increase the electrochemical active surface area and improve the charge transfer of crystalline Ni5P4 nanosheets, but could also regulate d-band center of Ni5P4 and optimize the adsorption towards reaction intermediates in water splitting. The results not only provide an excellent crystalline/amorphous core/shell heterostructure bifunctional electrocatalyst for overall water splitting but also greatly expand the application of rare earth metal phosphate CePO4.

In-situ fabrication of vertical heterogeneous nickel diselenide-molybdenum diselenide architectures as bifunctional overall water-splitting electrocatalyst

Despite the rapid advances in electrocatalysts based on two-dimensional (2D) transition metal dichalcogenides (TMDs) materials, they are subject to serious aggregation, poor conductivity and the presence of inactive basal planes. Herein, we have successfully demonstrated the in-situ construction of NiSe2–MoSe2 heterostructure arrays on carbon cloth (NiSe2–MoSe2/CC) by a facile two-step hydrothermal process. The presence of the synergistic effect in the heterostructures effectively optimizes the poor conductivity and hydrophilicity, and thus enables fast electron transfer, leading to enhanced electrochemical reaction. Furthermore, density functional theory calculations reveal that the electrons redistribution at the heterojunction interface and the reduced Gibbs free energy of hydrogen adsorption for hydrogen evolution reaction (HER)/the Gibbs free energy change value of rate-determining step for oxygen evolution reaction (OER), thus enhancing the HER/OER catalytic activity. Importantly, the device displays a good performance with a low overpotential of 98 and 310 mV for HER and OER, respectively, and a low cell voltage of 1.59 V for its corresponding electrolyzer (10 mA cm−2). This work presents the high-performance water splitting of bifunctional electrocatalysts based on 2D TMDs materials and offers a novel design concept of interface engineering.