Aromatic Surface Research Articles

Oxygen-induced surface hardening and aromatization of thermoset furanic biobased resin: Origin and consequences

This article emphasizes the phenomena occurring in furan resins at high temperature, once they are polymerized and before their carbonization. The effects of the atmosphere (N2 and air) during the curing of furan resins were investigated and it is shown that upon exposure to air at temperatures above 175 °C, the furan resins develop an aromatic surface. By means of solid-state NMR and infrared spectroscopy, it is demonstrated that the aromatic groups are mainly located on the material's surface. A mechanism of this surface modification is proposed together with a short kinetic study. In addition, the thermo-mechanical properties are studied. The aromatic surfaces decrease the damping capacity of the material, yet its resistance to degradation is increased. Finally, tensile properties of the furan resins are not affected by the presence of this aromatic surface.

Polycyclic aromatic compounds surface modulation of TiO2@SiO2 nanoparticles enhances the insulation performance of polypropylene film

Polypropylene (PP) film is an important component of metallized film capacitors. However, the insulation issues of polypropylene film significantly affect the safe and stable operation of capacitors. In this study, polycyclic aromatic compounds (PAC) were introduced to the surface of TiO2@SiO2 nanoparticles via chemical grafting, preparing Ti@Si-PAC nanofillers, to achieve modulation of the nanoparticle/PP interface. The experimental and simulation results indicate that Ti@Si-PAC/PP exhibits excellent insulation performance. The study indicates that the surface modulation of nanoparticles by PAC introduces a ‘soft interface’ between the nanoparticles and the polypropylene matrix. The ‘soft interface’ enhances the interfacial interaction, reduces dielectric loss, and introduces deep traps, exhibiting a significant inhibitory effect on carrier migration. Additionally, the introduction of PAC enhances the electron trapping capability in the interface region, which plays a positive role in quenching free radical chain reactions and reducing the damage of high-energy electrons to polypropylene molecular segments. This study provides an effective method for enhancing the insulation performance of polypropylene.

Beta-arrestin 1 mediated Src activation via Src SH3 domain revealed by cryo-electron microscopy.

Beta-arrestins (βarrs) are key regulators and transducers of G-protein coupled receptor signaling; however, little is known of how βarrs communicate with their downstream effectors. Here, we use cryo-electron microscopy to elucidate how βarr1 recruits and activates non-receptor tyrosine kinase Src. βarr1 binds Src SH3 domain via two distinct sites: a polyproline site in the N-domain and a non-proline site in the central crest region. At both sites βarr1 interacts with the aromatic surface of SH3 which is critical for Src autoinhibition, suggesting that βarr1 activates Src by SH3 domain displacement. Binding of SH3 to the central crest region induces structural rearrangements in the β-strand V, finger, and middle loops of βarr1 and interferes with βarr1 coupling to the receptor core potentially impacting receptor desensitization and downstream signaling.

Direct Ethylene Purification from a Four-Component Gas Mixture by a Microporous MOF with Aromatic Pore Surface and Carboxylates.

The single-step purification of ethylene (C2H4) from a mixture of carbon dioxide (CO2), acetylene (C2H2), ethylene (C2H4), and ethane (C2H6) was achieved through MOF Compound-1, where the aromatic pore surface and carboxylates selectively recognized C2H6 and CO2, respectively, resulting in a reversal of the adsorption orders for both gases (C2H6 > C2H4 and CO2 > C2H4). Breakthrough testing verified that the C2H4 purification ability could be enhanced 2.6 times after adding impure CO2. Grand Canonical Monte Carlo (GCMC) simulations demonstrate that there are interactions between CO2 and C2H6 molecules as well as between CO2 molecules themselves. These interactions contribute to the enhancement of the C2H4 purification ability upon the addition of CO2 and the increased adsorption of CO2.

Experimental and numerical investigations of soot formation in propane laminar coflow flames in O2/N2 and O2/CO2 atmospheres

Oxygen-rich combustion is a new type of clean combustion technology with important application prospects. At present, there are few detailed analyses on the mechanism changes of soot formation under oxygen enrichment of propane. In this paper, the effects of oxygen-rich (O2/N2, O2/CO2) combustion on soot formation in the propane laminar flow coaxial jet diffusion flame were investigated by using the experiment and numerical simulation. The flame image was taken by a color (CCD) camera in the visible band, and the two-dimensional distribution of temperature and soot volume fraction in the flame was reconstructed. In numerical simulation, the soot production model considers a detailed description of nucleation via collisions among heavy polycyclic aromatic hydrocarbons, particle aggregation, polycyclic aromatic hydrocarbons condensation, surface growth and oxidation through the hydrogen abstraction acetylene addition mechanism. The results show that the experimental results were compared with the numerical simulation results, and the numerical simulation results predict the temperature and soot change of oxygen-rich flame well. With the increase in oxygen concentration, the peaks of soot and temperature in the two oxygen-rich atmospheres gradually increased. With the increase in oxygen concentration, the peaks of soot and temperature in the two oxygen-rich atmospheres gradually increased. Comparing the combustion mechanism changes of the two oxygen-rich combustion systems, it was found that the hydrogen abstraction acetylene addition mechanism was the main cause of soot generation. The OH oxidation is dominated near the fuel nozzle side, and O2 oxidation is dominant downstream. With the substitution of CO2 for N2, the chemical effect of CO2 reduces the flame temperature and inhibits the formation mechanism and oxidation mechanism of soot to some extent. This in turn leaded to a reduction in the amount of soot produced.

Aromatic Amino Acid-Dependent Surface Assembly of Amphiphilic Peptides for One-Step Graphite Exfoliation and Graphene Functionalization.

Amphiphilic peptides show great potential for exfoliating graphite and functionalizing graphene. However, the variety of amino acids complicates our understanding of the underlying mechanisms. In this study, we designed four peptides (C6W1, C6W2, C6W4, and C6W6) with different amounts of aromatic tryptophan amino acids and two additional peptides (C6F4 and C6Y4) by substituting tryptophan with aromatic phenylalanine or tyrosine. This allowed us to investigate the processes and mechanisms of graphite exfoliation and graphene functionalization. Using experimental and computational methods, we discovered that peptides containing tryptophan demonstrated higher exfoliation efficiency and increased tryptophan content further improved this efficiency, resulting in more peptide-functionalized graphene layers. Significantly, the primary driving force for the surface-assisted assembly of peptides on graphite is the π-π stacking interaction between the aromatic ring contributed by aromatic amino acids and the hexagonal rings of the graphite surface. This interaction leads to a layer-by-layer exfoliation mechanism. Our research offers valuable insights into peptide design strategies for one-step graphite exfoliation and graphene functionalization in aqueous environments.

Using Hybrid PDI-Fe3O4 Nanoparticles for Capturing Aliphatic Alcohols: Halogen Bonding vs. Lone Pair-π Interactions.

In this study, Fe3O4 nanoparticles (FeNPs) decorated with halogenated perylene diimides (PDIs) have been used for capturing VOCs (volatile organic compounds) through noncovalent binding. Concretely, we have used tetrachlorinated/brominated PDIs as well as a nonhalogenated PDI as a reference system. On the other hand, methanol, ethanol, propanol, and butanol were used as VOCs. Experimental studies along with theoretical calculations (the BP86-D3/def2-TZVPP level of theory) pointed to two possible and likely competitive binding modes (lone pair-π through the π-acidic surface of the PDI and a halogen bond via the σ-holes at the Cl/Br atoms). More in detail, thermal desorption (TD) experiments showed an increase in the VOC retention capacity upon increasing the length of the alkyl chain, suggesting a preference for the interaction with the PDI aromatic surface. In addition, the tetrachlorinated derivative showed larger VOC retention times compared to the tetrabrominated analog. These results were complemented by several state-of-the-art computational tools, such as the electrostatic surface potential analysis, the Quantum Theory of Atoms in Molecules (QTAIM), as well as the noncovalent interaction plot (NCIplot) visual index, which were helpful to rationalize the role of each interaction in the VOC···PDI recognition phenomena.

Surface-Assisted Selective Air Oxidation of Phosphines Adsorbed on Activated Carbon.

Trialkyl- and triarylphosphines readily adsorb onto the surface of porous activated carbon (AC) even in the absence of solvents through van der Waals interactions between the lone electron pair and the AC surface. This process has been proven by solid-state NMR techniques. Subsequently, it is demonstrated that the AC enables the fast and selective oxidation of adsorbed phosphines to phosphine oxides at ambient temperature in air. In solution, trialkylphosphines are oxidized to a variety of P(V) species when exposed to the atmosphere, while neat or dissolved triarylphosphines cannot be oxidized with air. When the trialkyl- and triarylphosphines PnBu3 (1), PEt3, (2), PnOct3 (3), PMetBu2 (4), PCy3 (5), and PPh3 (6) are adsorbed in a mono- or submonolayer on the surface of AC, in the absence of a solvent and at ambient temperature, they are quantitatively oxidized to the adsorbed phosphine oxides, 1ox-6ox, once air is admitted. No formation of any unwanted P(V) side products or water adducts is observed. The phosphine oxides can then be recovered in good yields by washing them off of the AC. The oxidation is likely facilitated by a radical activation of molecular oxygen due to delocalized electrons on the aromatic surface coating of AC, as proven by ESR. This easy and inexpensive oxidation method renders hydrogen peroxide or other oxidizers unnecessary and is broadly applicable to sterically hindered and even to air-stable triarylphosphines. Phosphines adsorbed at lower surface coverages on AC oxidize at a faster rate. All oxidation reactions were monitored by solution- and solid-state NMR spectroscopy.

Proteogenomic Characterization of Pseudomonas veronii SM-20 Growing on Phenanthrene as Only Carbon and Energy Source.

In this study, we conducted an extensive investigation of the biodegradation capabilities and stress response of the newly isolated strain Pseudomonas veronii SM-20 in order, to assess its potential for bioremediation of sites contaminated with polycyclic aromatic hydrocarbons (PAHs). Initially, phenotype microarray technology demonstrated the strain's proficiency in utilizing various carbon sources and its resistance to certain stressors. Genomic analysis has identified numerous genes involved in aromatic hydrocarbon metabolism. Biodegradation assay analyzed the depletion of phenanthrene (PHE) when it was added as a sole carbon and energy source. We found that P. veronii strain SM-20 degraded approximately 25% of PHE over a 30-day period, starting with an initial concentration of 600 µg/mL, while being utilized for growth. The degradation process involved PHE oxidation to an unstable arene oxide and 9,10-phenanthrenequinone, followed by ring-cleavage. Comparative proteomics provided a comprehensive understanding of how the entire proteome responded to PHE exposure, revealing the strain's adaptation in terms of aromatic metabolism, surface properties, and defense mechanism. In conclusion, our findings shed light on the promising attributes of P. veronii SM-20 and offer valuable insights for the use of P. veronii species in environmental restoration efforts targeting PAH-impacted sites.

Straightforward Access to Chiral Phosphangulene Derivatives.

Polycyclic aromatic hydrocarbons including heteroatoms have found a wide range of applications, for instance, in supramolecular chemistry or material science. Phosphangulene derivatives are P-containing polycyclic aromatic hydrocarbons presenting a concave aromatic surface suitable for building supramolecular receptors. However, the applications of this convenient building block have been strongly hampered by a difficult and multistep preparation requiring several protection-deprotection sequences along with the use of harmful reagents. Here, we report a straightforward, protecting-group-free, three-step, and hundred-milligram-scale synthesis of a chiral phosphangulene oxide derivative via a triple phospho-Fries rearrangement. This compound was easily resolved by chiral HPLC and further functionalized, giving rise to versatile chiral phosphangulene derivatives. Following this strategy, chiral phosphangulene oxides with low symmetry were synthesized. Molecular crystal structures revealed a variety of molecular organization in the solid. This opens the way to wider use of this compound as a building block for cages or new materials.

Preference in the Type of Halogen Bonding Interactions within Co-Crystals of Anthraquinone with a Pair of Isosteric Perhalobenzenes

The preference in the type of halogen bond accepted by anthraquinone (C14H8O2) from two isosteric donors, namely 1,4-diiodoperfluorobenzene (C6I2F4) and 1,4-diiodoperchlorobenzene (C6I2Cl4), is reported. The two co-crystals, (C6I2F4)·(C14H8O2) and (C6I2Cl4)·(C14H8O2), are sustained primarily by I···O rather than π-type halogen bonds to form these multicomponent solids. The ability for each component to engage in two divergent halogen-bonding interactions generates a one-dimensional chain structure for each co-crystal. The bias in the halogen-bonding type is due to the difference in electrostatic potential between the carbonyl oxygen and the aromatic surface on the anthraquinone. To support this observed preference, the binding energies of the I···O halogen bond were quantified for both co-crystals by using density functional theory calculations and then compared to the interaction energy for related π-type halogen bond from previously reported structures.

Outer-Membrane Permeabilization, LPS Transport Inhibition: Activity, Interactions, and Structures of Thanatin Derived Antimicrobial Peptides.

Currently, viable antibiotics available to mitigate infections caused by drug-resistant Gram-negative bacteria are highly limited. Thanatin, a 21-residue-long insect-derived antimicrobial peptide (AMP), is a promising lead molecule for the potential development of novel antibiotics. Thanatin is extremely potent, particularly against the Enterobacter group of Gram-negative pathogens, e.g., E. coli and K. pneumoniae. As a mode of action, cationic thanatin efficiently permeabilizes the LPS-outer membrane and binds to the periplasmic protein LptAm to inhibit outer membrane biogenesis. Here, we have utilized N-terminal truncated 16- and 14-residue peptide fragments of thanatin and investigated structure, activity, and selectivity with correlating modes of action. A designed 16-residue peptide containing D-Lys (dk) named VF16 (V1PIIYCNRRT-dk-KCQRF16) demonstrated killing activity in Gram-negative bacteria. The VF16 peptide did not show any detectable toxicity to the HEK 293T cell line and kidney cell line Hep G2. As a mode of action, VF16 interacted with LPS, permeabilizing the outer membrane and binding to LptAm with high affinity. Atomic-resolution structures of VF16 in complex with LPS revealed cationic and aromatic surfaces involved in outer membrane interactions and permeabilization. Further, analyses of an inactive 14-residue native thanatin peptide (IM14: IIYCNRRTGKCQRM) delineated the requirement of the β-sheet structure in activity and target interactions. Taken together, this work would pave the way for the designing of short analogs of thanatin-based antimicrobials.

Aromatic pore surface with multiple adsorption sites for one-step C2H4 acquisition from C2H6/C2H4 mixture

A microporous metal–organic framework with multiple N/O/F sites achieves high-efficiency one-step C2H4 purification from C2H6/C2H4 mixture.

Electric field-assisted anion-π catalysis on carbon nanotubes in electrochemical microfluidic devices.

The vision to control the charges migrating during reactions with external electric fields is attractive because of the promise of general catalysis, emergent properties, and programmable devices. Here, we explore this idea with anion-π catalysis, that is the stabilization of anionic transition states on aromatic surfaces. Catalyst activation by polarization of the aromatic system is most effective. This polarization is induced by electric fields. The use of electrochemical microfluidic reactors to polarize multiwalled carbon nanotubes as anion-π catalysts emerges as essential. These reactors provide access to high fields at low enough voltage to prevent electron transfer, afford meaningful effective catalyst/substrate ratios, and avoid interference from additional electrolytes. Under these conditions, the rate of pyrene-interfaced epoxide-opening ether cyclizations is linearly voltage-dependent at positive voltages and negligible at negative voltages. While electromicrofluidics have been conceived for redox chemistry, our results indicate that their use for supramolecular organocatalysis has the potential to noncovalently electrify organic synthesis in the broadest sense.

Peripheral substitution effects on unnatural base pairs: A case of brominated TPT3 to enhance replication fidelity

The high fidelity poses a central role in developing unnatural base pairs (UBPs), which means the high pairing capacity of unnatural bases with their partners, and low mispairing with all the natural bases. Different strategies have been used to develop higher-fidelity UBPs, including optimizing hydrophobic interaction forces between UBPs. Variant substituent groups are allowed to fine tune the hydrophobic forces of different UBPs’ candidates. However, the modifications on the skeleton of TPT3 base are rare and the replication fidelity of TPT3-NaM remains hardly to improve so far. In this paper, we reasoned that modifying and/or expanding the aromatic surface by Bromo-substituents to slightly increase hydrophobicity of TPT3 might offer a way to increase the fidelity of this pair. Based on the hypothesis, we synthesized the bromine substituted TPT3, 2-bromo-TPT3 and 2, 4-dibromo-TPT3 as the new TPT3 analogs. While the enzyme reaction kinetic experiments showed that d2-bromo-TPT3-dNaM pair and d2, 4-dibromo-TPT3TP-dNaM pair had slightly less efficient incorporation and extension rates than that of dTPT3-dNaM pair, the assays did reveal that the mispairing of 2-bromo-TPT3 and 2, 4-dibromo-TPT3 with all the natural bases could dramatically decrease in contrast to TPT3. Their lower mispairing capacity promoted us to run polymerase chain amplification reactions, and a higher fidelity of d2-bromo-TPT3-dNaM pair could be obtained with 99.72 ± 0.01% of the in vitro replication fidelity than that of dTPT3-dNaM pair, 99.52 ± 0.09%. In addition, d2-bromo-TPT3-dNaM can also be effectively copied in E. coli cells, which showed the same replication fidelity as that of dTPT3-dNaM in the specific sequence, but a higher fidelity in the random sequence context.

Anion‐(π)n‐π Catalytic Micelles

AbstractAnion‐π catalysis operates by stabilizing anionic transition states on π‐acidic aromatic surfaces. In anion‐(π)n‐π catalysis, π stacks add polarizability to strengthen interactions. In search of synthetic methods to extend π stacks beyond the limits of foldamers, the self‐assembly of micelles from amphiphilic naphthalenediimides (NDIs) is introduced. To interface substrates and catalysts, charge‐transfer complexes with dialkoxynaphthalenes (DANs), a classic in supramolecular chemistry, are installed. In π‐stacked micelles, the rates of bioinspired ether cyclizations exceed rates on monomers in organic solvents by far. This is particularly impressive considering that anion‐π catalysis in water has been elusive so far. Increasing rates with increasing π acidity of the micelles evince operational anion‐(π)n‐π catalysis. At maximal π acidity, autocatalytic behavior emerges. Dependence on position and order in confined micellar space promises access to emergent properties. Anion‐(π)n‐π catalytic micelles in water thus expand supramolecular systems catalysis accessible with anion‐π interactions with an inspiring topic of general interest and great perspectives.

Anion-(π)n-π Catalytic Micelles.

Anion-π catalysis operates by stabilizing anionic transition states on π-acidic aromatic surfaces. In anion-(π)n-π catalysis, π stacks add polarizability to strengthen interactions. In search of synthetic methods to extend π stacks beyond the limits of foldamers, the self-assembly of micelles from amphiphilic naphthalenediimides (NDIs) is introduced. To interface substrates and catalysts, chargetransfer complexes with dialkoxynaphthalenes (DANs), a classic in supramolecular chemistry, are installed. In π-stacked micelles, the rates of bioinspired ether cyclizations exceed rates on monomers in organic solvents by far. This is particularly impressive considering that anion-π catalysis in water has been elusive so far. Increasing rates with increasing π acidity of the micelles evince operational anion-(π)n-π catalysis. At maximal π acidity, autocatalytic behavior emerges. Dependence on position and order in confined micellar space promises access to emergent properties. Anion-(π)n-π catalytic micelles in water thus expand supramolecular systems catalysis accessible with anion-π interactions with an inspiring topic of general interest and great perspectives.

Quantum Tunneling Facilitates Water Motion across the Surface of Phenanthrene.

Quantum tunneling is a fundamental phenomenon that plays a pivotal role in the motion and interaction of atoms and molecules. In particular, its influence in the interaction between water molecules and carbon surfaces can have significant implications for a multitude of fields ranging from atmospheric chemistry to separation technologies. Here, we unveil at the molecular level the complex motion dynamics of a single water molecule on the planar surface of the polycyclic aromatic hydrocarbon phenanthrene, which was used as a small-scale carbon surface-like model. In this system, the water molecule interacts with the substrate through weak O-H···π hydrogen bonds, in which phenanthrene acts as the hydrogen-bond acceptor via the high electron density of its aromatic cloud. The rotational spectrum, which was recorded using chirped-pulse Fourier transform microwave spectroscopy, exhibits characteristic line splittings as dynamical features. The nature of the internal dynamics was elucidated in great detail with the investigation of the isotope-substitution effect on the line splittings in the rotational spectra of the H218O, D2O, and HDO isotopologues of the phenanthrene-H2O complex. The spectral analysis revealed a complex internal dynamic showing a concerted tunneling motion of water involving its internal rotation and its translation between the two equivalent peripheral rings of phenanthrene. This high-resolution spectroscopy study presents the observation of a tunneling motion exhibited by the water monomer when interacting with a planar carbon surface with an unprecedented level of detail. This can serve as a small-scale analogue for water motions on large aromatic surfaces, i.e., large polycyclic aromatic hydrocarbons and graphene.

Formation of Eigen or Zundel Features at Protonated Water Cluster-Aromatic Interfaces.

Interfacial interactions of protonated water clusters adsorbed at aromatic surfaces play an important role in biology, and in atmospheric, chemical and materials sciences. Here, we investigate the interaction of protonated water clusters ((H+H2O)n (where n = 1 - 3)) with benzene (Bz), coronene (Cor) and dodecabenzocoronene (Dbc)). To study the structure, stability and spectral features of these complexes, computations are done using DFT-PBE0(+D3) and SAPT0 methods. These interactions are probed by AIM electron density topography and non-covalent index (NCI) analyses. We suggest that the excess proton plays a crucial role in the stability of these model interfaces through strong inductive effects and the formation of Eigen or Zundel features. Also, computations reveal that the extension of the π-aromatic system and the increase of the number of water molecules in the H-bounded water network lead to a strengthening of the interactions between the corresponding aromatic compound and protonated water molecules, except when a Zundel ion is formed. The present findings may serve to understand in-depth the role of proton localized at aqueous medium interacting with large aromatic surfaces such as graphene interacting with acidic liquid water. Besides, we give their IR and UV-Vis spectra , which may help for their identification.

Schiff Bases Functionalized with T-Butyl Groups as Adequate Ligands to Extended Assembly of Cu(II) Helicates.

The study of the inherent factors that influence the isolation of one type of metallosupramolecular architecture over another is one of the main objectives in the field of Metallosupramolecular Chemistry. In this work, we report two new neutral copper(II) helicates, [Cu2(L1)2]·4CH3CN and [Cu2(L2)2]·CH3CN, obtained by means of an electrochemical methodology and derived from two Schiff-based strands functionalized with ortho and para-t-butyl groups on the aromatic surface. These small modifications let us explore the relationship between the ligand design and the structure of the extended metallosupramolecular architecture. The magnetic properties of the Cu(II) helicates were explored by Electron Paramagnetic Resonance (EPR) spectroscopy and Direct Current (DC) magnetic susceptibility measurements.