ARGET ATRP Research Articles

Synergistic signal amplification for HER2 biosensing using tetrahedral DNA nanostructures and 2D transition metal carbon/nitride@Au composites via ARGET ATRP

The rising incidence of breast cancer underscores the critical need for accurate and early detection methods, particularly for key biomarkers like human epidermal growth factor receptor 2 (HER2). Here, a synergistic signal amplification electrochemical biosensor was developed for HER2 detection that utilizes tetrahedral DNA nanostructures (TDN), 2D transition metal carbon/nitride@Au (MXene@Au) composites, and activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP). Specifically, TDN serves as the substrate, with the aptamer anchored by the MXene@Au composite support matrix. This design facilitates the generation of electrochemical currents through the ARGET ATRP signal amplification strategy. The robustness and high affinity of TDN minimize surface effects on the electrode and enhance target binding. Additionally, the high conductivity of the MXene@Au composites improves the detection sensitivity of the biosensor. The use of the ARGET ATRP strategy further enhances detection sensitivity. The biosensor exhibits a wide detection range from 10 pg·mL−1 to 10 µg·mL−1 with a remarkable detection limit of 0.39 pg·mL−1, verified under optimal experimental conditions. The designed biosensor offers a significant advancement in the field of oncological diagnostics, providing a highly sensitive, low-cost, and simple method for early HER2 detection, thereby potentially improving treatment outcomes for breast cancer patients.

Could Olympic Gels of Polystyrene be Produced by ARGET ATRP From Bifunctional Initiators?

The kinetics of gelation in the Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization (ARGET ATRP) of styrene, using a bifunctional initiator and no crosslinking agents are investigated. By applying the method of moments, we develop a system of differential equations that accounts for the formation of polymer rings. The kinetic rate constants of this model are optimized on the experimentally determined kinetics, varying the reaction temperature and ethanol fraction. Subsequently, we explore how variations in the amounts of catalyst, initiator, and reducing agents affect the simulated equilibria of ARGET ATRP, the emergence of gelation, and the swelling properties of the resulting networks. These findings suggest that favoring ring formation enhances the gelation phenomenon, supporting the hypothesis that the networks formed under the reported reaction conditions are olympic gels.

A highly sensitive fluorescence sensor for tobacco mosaic virus RNA based on DSN cycle and ARGET ATRP double signal amplification

AbstractEarly and sensitive detection of tobacco mosaic virus (TMV) is of great significance for improving crop yield and protecting germplasm resources. Herein, we constructed a novel fluorescence sensor to detect TMV RNA (tRNA) through double strand specific nuclease (DSN) cycle and activator regenerative electron transfer atom transfer radical polymerization (ARGET ATRP) dual signal amplification strategy. The hairpin DNA complementarily paired with tRNA was used as a recognition unit to specifically capture tRNA. By the double‐stranded DNA hydrolyzed with DSN, tRNA is released to open more hairpin DNA, and more complementary DNA (cDNA) is bound to the surface of the magnetic beads (MBs) to achieve the first amplification. After binding with the initiator, the cDNA employed ARGET ATRP to attach more fluorescent signal molecules to the surface of MBs, thus achieving the second signal amplification. Under the optimal experimental conditions, the logarithm of fluorescence intensity versus tRNA concentration showed a good linear relationship in the range of 0.01–100 pM, with a detection limit of 1.03 fM. The limit of detection (LOD) was calculated according to LOD = 3 N/S. Besides, the sensor showed good reproducibility and stability, which present provided new method for early and highly sensitive detection for plant viruses.

A ratiometric electrochemical biosensor based on ARGET ATRP for detection of HER2 gene

Human epidermal growth factor receptor 2 (HER2), a common proto-oncogene, is overexpressed in a subset of breast cancer patients. It is essential to track HER2 expression for early breast cancer diagnosis. Herein, a ratiometric electrochemical biosensor for detection of HER2 based on activators generated by electron transfer for atom transfer radical polymerisation (AGET ATRP) and hairpin DNA was developed. Specifically, hairpin DNA was first self-assembled on the gold electrode by Au–S bond. Upon capturing HER2, the stem-loop structure of hairpin DNA was unfolded, the signal value of methylene blue (MB) decreased as it moved away from the electrode surface. cDNA was linked with HER2 by complementary base pairing to introduce amino group. Then, the initiator 2-bromo-2-methylpropionic acid (BMP) were connected to the amino group on the cDNA to activate ARGET ATRP. The detection performance of biosensors for HER2 was explored by the ratio signal between two signal molecules. Under optimal conditions, this ratiometric electrochemical biosensor shows good selectivity and stability with a wide detection range of 1–1 × 106 pM and a detection limit of 78.47 fM. Furthermore, the biosensor exhibits satisfactory anti-interference ability due to the hairpin DNA and dual signal system, and has promising application prospects in the detection of other DNA disease markers.

Synthesis of grafted bromoisobutyryl esterified starch using electron transfer atom transfer radical polymerization method with high-performance adhesion and film properties

Nowadays, few investigations on the process parameters of grafted starch synthesized using electron transfer atom transfer radical polymerization (ARGET ATRP) and its applications in warp sizing and paper-making are presented. Therefore, this study aimed to survey the appropriate process parameters of bromoisobutyryl esterified starch-g-poly(acrylic acid) (BBES-g-PAA) synthesized by the ARGET ATRP, and also aimed to provide a new biobased BBES-g-PAA adhesive. The appropriate synthesis process parameters were 1.2, 0.32, and 0.6 in the molar ratios of vitamin C, CuBr2, and pentamethyldivinyltriamine to BBES, respectively, at 40 °C for 5 h. The BBES-g-PAA samples with a grafting ratio range of 4.63–14.14 % exhibited bonding forces of 57.8–64.6 N to wool fibers [55.5 N (BBES) and 53.8 N (ATS)], and their films showed breaking elongations of 3.29–3.80 % [2.74 % (BBES) and 2.49 % (ATS)] and tensile strengths of 29.1–25.4 MPa [30.4 MPa (BBES) and 34.7 MPa (ATS)]. Compared with BBES, significantly increased bonding forces and film elongations, and decreased film strengths for the BBES-g-PAA samples with grafting ratios ≥10.54 % were displayed (p < 0.05). The time (100–42 s) taken for the BBES-g-PAA films was significantly shorter than that of ATS (246 s) and BBES (196 s) films (p < 0.05), corresponding to better desizability.

An Undergraduate Laboratory Module Integrating Organic Chemistry and Polymer Science.

Polymer science is receiving wider acceptance in the organic chemistry community; thus, it is imperative to include it in the undergraduate organic chemistry curriculum. Despite the ever-increasing popularity of the topic of polymer chemistry in undergraduate curricula, a comprehensive laboratory experiment module describing a polypeptide synthesis by ring-opening polymerization of N-carboxyanhydride (NCA ROP) and a homopolymer synthesis by activators-regenerated by electron-transfer for atom transfer radical polymerization (ARGET ATRP) has yet to be proposed. Herein, we report a semester-long, ten week undergraduate laboratory module focusing on the synthesis and analytical characterization of polyalanine and polystyrene for an advanced organic chemistry class. Students received hands-on-experiences in synthesizing polymers followed by their characterization via proton nuclear magnetic resonance (1H NMR) spectroscopy, electrospray ionization-mass spectrometry (ESI-MS), gel permeation chromatography (GPC), thermogravimetry (TGA), differential scanning calorimetry (DSC), and transmission electron microscopy (TEM), which are not well-presented in the typical organic chemistry curricula. These engaging hands-on lessons in the newly designed laboratory module not only increase students' interests in an interdisciplinary environment of organic chemistry and polymer science but also cultivate their research interests and communication skills and promote critical thinking.

Synthesis of phosphate hydrogels with excellent swelling behavior prepared by ascorbic acid -mediated ARGET ATRP

This manuscript explores the synthesis of hydrogels through reversible deactivation radical polymerization (RDRP) methods, specifically, activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and Cu0-mediated ATRP. These techniques are known to offer improved control over polymer network structures due to their slow polymerization kinetics. However, these methods have historically been challenging to apply to stimuli-responsive polymers, such as those with acidic or basic moieties. In this study, the direct synthesis of poly(2-(methacryloyloxy) ethyl phosphate) (PMOEP), a phosphate-pendant hydrogel, was investigated in aqueous media by both ascorbic acid (AsA)-mediated ARGET ATRP and Cu0-mediated ATRP. 2-(methacryloyloxy) ethyl phosphate (MOEP) was utilized as the active monomer with tris(2-pyridylmethyl) amine (TPMA) as the ligand. A unique feature of this work is that the diene moiety inherently present in the commercial monomer, bis[2-(methacryloyloxy) ethyl] phosphate (BMOEP), served as the crosslinking agent to obtain the novel PMOEP hydrogel. Formulations were tuned to optimize the swelling characteristics of the hydrogels, with the restriction that the hydrogels should swell homogeneously without fracture. Importantly, using AsA as the reducing agent in the ARGET ATRP reaction resulted in improved homogeneity and enhanced swelling properties of the hydrogel. Furthermore, tuning the target degree of polymerization (Dp) ([monomer]:[initiator]) had a significant impact on swelling characteristics. Specifically, PMOEP hydrogels synthesized via ARGET ATRP with a target Dp of 300 and 1 mM CuII catalyst demonstrated outstanding water absorption capacity of more than 2500% (relative to the dry mass) in phosphate buffer solution (PBS) at pH 7.4 and over 6000% in pure water. The morphology of these hydrogels was imaged using field emission environmental scanning electron microscopy (FE-ESEM) and the chemical composition was examined using Fourier transform infrared (FTIR) spectroscopy. Furthermore, nuclear magnetic resonance (NMR) analysis was performed to investigate the conversion rate of monomer during Cu0-mediated ATRP. To the authors’ knowledge, the synthesis of a 100% phosphate-pendant hydrogel using AsA-mediated ARGET ATRP and an internal phosphodiester crosslinking moiety without dilution or comonomer, has not been reported previously. This facile method for synthesizing and controlling phosphate-based hydrogel properties also provides an opportunity to include additional functional groups and holds significant promise for applications in biomedical engineering, agriculture, and membrane separations.

Quasi-Chromophores Segregated by Single-Chain Nanoparticles of Fluorinated Zwitterionic Random Copolymers Showing Remarkably Enhanced Fluorescence Emission Capable of Fluorescent Cell Imaging.

Organic and polymer fluorescent nanomaterials are a frontier research focus. Here in this work, a series of fluorinated zwitterionic random copolymers end-attached with a quasi-chromophoric group of pyrene or tetraphenylethylene (TPE) are well synthesized via atom transfer radical polymerization with activators regenerated by electron transfer (ARGET ATRP). Those random copolymers with total degree of polymerization 100 or 200 are able to produce fluorescent single-chain nanoparticles (SCNPs) through intra-chain self-folding assembly with quite uniform diameters in the range of 10-20nm as characterized by dynamic light scattering and transmission electron microscopy. By virtue of the segregation or confinement effect, both SCNPs functionalized with pyrene or TPE group are capable of emitting fluorescence, with pyrene tethered SCNPs exhibiting stronger fluorescence emission reaching the highest quantum yield ≈20%. Moreover, such kind of fluorescent SCNPs manifest low cytotoxicity and good cell imaging performance for Hela cells. The creation of fluorescent SCNPs through covalently attached one quasi-chromophore to the end of one fluorinated zwitterionic random copolymer provides an alternative strategy for preparing polymeric luminescence nanomaterials, promisingly serving as a new type of fluorescent nanoprobes for biological imaging applications.

A new starch-based adhesive material containing diblock branches for sizing cotton and cotton/polyester

A new starch macroinitiator (dibromopropyl etherified starch, DPES) with two active sites per dibromopropyl substituent, was successfully prepared and then conducted a two-step graft polymerization with EMA and AA, respectively, to prepare new grafted starch (DPES-g-poly(ethyl methacrylate)-b-poly(acrylic acid), DPES-g-PEMA-b-PAA) samples using the electron transfer atom transfer radical polymerization (ARGET ATRP) technique in an aqueous medium. The DPES-g-PEMA-b-PAA had excellent adhesion to cotton and cotton/polyester roving. As the grafting ratios increased from 0 to 9.346%, gradually promoted adhesion forces from 61.3 N to 76.8 N for cotton roving and from 91.2 N to 123.0 N for cotton/polyester roving were presented. In addition, the DPES-g-PEMA-b-PAA possessed lower film crystallinity and brittleness as well as higher viscosity compared with ATS. Based on these results, the DPES-g-PEMA-b-PAA with a total grafting ratio of 9.346% was concluded as a new adhesive material in the application of sizing cotton and cotton/polyester warps.

A controllable Y-shaped DNA structure assisted aptasensor for the simultaneous detection of AFB1 and OTA based on ARGET ATRP.

The development of a simple, rapid, and sensitive technology for the simultaneous detection of mycotoxins is of great significance in ensuring the safety of foods and drugs. Herein, a fluorescence aptasensor with high sensitivity and reproducibility for the simultaneous detection of aflatoxin B1 (AFB1) and ochratoxin A (OTA) was developed. In this sensing system, AFB1 and OTA aptamers were co-immobilized on the surface of magnetic beads (MBs) to form a Y-shaped structure through the principle of complementary base pairing, and were used as recognition probes to specifically capture the target. Activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) was used as a signal amplification strategy to improve the sensitivity. The initiator modified at the end of an antibody initiates the ARGET ATRP reaction. Different fluorescence signals were designed to achieve the simultaneous detection of OTA and AFB1 with limits of 426.18 and 79.55 fg mL-1 for AFB1 and OTA, respectively. In addition, experiments were conducted on three types of samples, and the recoveries of the two mycotoxins ranged from 87.30% to 109.50%, with relative standard deviations ranging from 0.50% to 4.92% under reproducible conditions. The results suggest that the developed aptasensor is sufficient to meet the different regulatory requirements of the two mycotoxins in food and drug safety and shows great potential.

The effect of comb length on the in vitro and in vivo properties of self-assembled poly(oligoethylene glycol methacrylate)-based block copolymer nanoparticles.

Comb copolymer analogues of poly(lactic acid)-polyethylene glycol block copolymers (PLA-b-PEG) offer potential to overcome the inherent chemistry and stability limitations of their linear block copolymer counterparts. Herein, we examine the differences between P(L)LA10K-b-PEG10K and linear-comb copolymer analogues thereof in which the linear PEG block is replaced by poly(oligo(ethylene glycol) methacrylate) (POEGMA) blocks with different side chain (comb) lengths but the same overall molecular weight. P(L)LA10K-b-POEGMA47510K and P(L)LA10K-b-POEGMA200010K block copolymers were synthesized via activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and fabricated into self-assembled nanoparticles using flash nanoprecipitation via confined impinging jet mixing. Linear-comb copolymer analogues based on PLA-b-POEGMA yielded smaller but still well-controlled nanoparticle sizes (88 ± 2 nm and 114 ± 1 nm respectively compared to 159 ± 2 nm for P(L)LA10K-b-PEG10K nanoparticles) that exhibited improved colloidal stability relative to linear copolymer-based nanoparticles over a 15 day incubation period while maintaining comparably high cytocompatibility, although the comb copolymer analogues had somewhat lower loading capacity for doxorubicin hydrochloride. Cell spheroid studies showed that the linear-comb copolymers promoted enhanced tumor transport and thus cell killing compared to conventional linear block copolymers. In vivo studies showed all NP types could passively accumulate within implanted CT26 tumors but with different accumulation profiles, with P(L)LA10K-b-POEGMA200010K NPs showing continuous accumulation throughout the full 24 h monitoring period whereas tumor accumulation of P(L)LA10K-b-POEGMA47510K NPs was significant only between 8 h and 24 h. Overall, the linear-comb copolymer analogues exhibited superior stability, biodistribution, spheroid penetration, and inherent tunability over linear NP counterparts.

ARGET ATRP of styrene with low catalyst usage in bio-based solvent γ-valerolactone

ARGET ATRP of styrene with low catalyst usage in bio-based solvent γ-valerolactone

Vegetable Oil as a Continuous Phase in Inverse Emulsions: ARGET ATRP for Synthesis of Water-Soluble Polymers

Vegetable Oil as a Continuous Phase in Inverse Emulsions: ARGET ATRP for Synthesis of Water-Soluble Polymers

Facile preparation of near-monodisperse oligocellulose and its elastomeric derivatives with tunable mechanical properties

Oligocellulose (OC) with low polydispersity indices has been produced in large quantities using an improved method of acid-assisted hydrolysis, in which long cellulose chains disintegrate in concentrated phosphoric acid at moderately elevated temperatures. The hydrolysis time has been reduced by three orders of magnitude without compromising the overall yield of the process or the quality of OC products. The efficient production of high-quality OCs in large quantities allows for developing OC-derived elastomeric materials. A series of OC-graft-poly(isobornyl methacrylate-random-n-butyl acrylate) [OC-g-P(IBOMA-r-BA)] elastomers have been synthesized via activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP). OC-g-P(IBOMA-r-BA) elastomers have tunable molecular architectures and phase morphologies toward desirable mechanical properties and thermal stability suitable for various applications. The methodologies of the OC production and the graft-polymers synthesis in this study would help advance technologies for broader applications of bio-based elastomers.

Electrochemical biosensor for highly sensitive detection of cTnI based on a dual signal amplification strategy of ARGET ATRP and ROP

Cardiac troponin I (cTnI), a gold biomarker for the diagnosis of acute myocardial infarction (AMI), plays a vital role in the early diagnosis, treatment and prognosis analysis of AMI. In this paper, an electrochemical biosensor for the highly sensitive determination of cTnI was fabricated based on the dual signal amplification strategy of electron transfer atom transfer radical polymerization (ARGET ATRP) and ring-opening polymerization (ROP) for the first time. Briefly, the thiolate cTnI-aptamer 1, which was bonded to the electrode via Au–S bonds, specifically captured cTnI to the electrode surface. Then, cTnI-aptamer 2 (Apt2) was successfully introduced to the electrode surface to form Apt-cTnI-Apt sandwich structure. Subsequently, the initiator BIBB was connected to Apt2 through bromination reaction, and then the resulting ATRP polymer was employed as a macromolecular initiator for the succeeding reaction. Next, the monomers, α-amino acid-N-carboxylic acid anhydride ferrocene derivatives (NCA-Fc), used for the ROP reaction produced numerous electroactive polymers on the electrode surface. The dual action of ARGET ATRP and ROP significantly improved sensitivity of cTnI biosensor assay, the prepared biosensor displayed a wide linear detection range from 100 fg mL−1 to 100 ng mL−1, with a detection limit of 32.24 fg mL−1. The method exhibited favorable selectivity, simple operation and excellent stability. Furthermore, the biosensor still rendered satisfactory analytical performance in the detection of clinical serum samples, indicating the application potential in clinical diagnosis.

Adsorption of Aldehyde-Functional Diblock Copolymer Spheres onto Surface-Grafted Polymer Brushes via Dynamic Covalent Chemistry Enables Friction Modification.

Dynamic covalent chemistry has been exploited to prepare numerous examples of adaptable polymeric materials that exhibit unique properties. Herein, the chemical adsorption of aldehyde-functional diblock copolymer spherical nanoparticles onto amine-functionalized surface-grafted polymer brushes via dynamic Schiff base chemistry is demonstrated. Initially, a series of cis-diol-functional sterically-stabilized spheres of 30-250 nm diameter were prepared via reversible addition-fragmentation chain transfer (RAFT) aqueous dispersion polymerization. The pendent cis-diol groups within the steric stabilizer chains of these precursor nanoparticles were then oxidized using sodium periodate to produce the corresponding aldehyde-functional spheres. Similarly, hydrophilic cis-diol-functionalized methacrylic brushes grafted from a planar silicon surface using activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) were selectively oxidized to generate the corresponding aldehyde-functional brushes. Ellipsometry and X-ray photoelectron spectroscopy were used to confirm brush oxidation, while scanning electron microscopy studies demonstrated that the nanoparticles did not adsorb onto a cis-diol-functional precursor brush. Subsequently, the aldehyde-functional brushes were treated with excess small-molecule diamine, and the resulting imine linkages were converted into secondary amine bonds via reductive amination. The resulting primary amine-functionalized brushes formed multiple dynamic imine bonds with the aldehyde-functional diblock copolymer spheres, leading to a mean surface coverage of approximately 0.33 on the upper brush layer surface, regardless of the nanoparticle size. Friction force microscopy studies of the resulting nanoparticle-decorated brushes enabled calculation of friction coefficients, which were compared to that measured for the bare aldehyde-functional brush. Friction coefficients were reasonably consistent across all surfaces except when particle size was comparable to the size of the probe tip. In this case, differences were ascribed to an increase in contact area between the tip and the brush-nanoparticle layer. This new model system enhances our understanding of nanoparticle adsorption onto hydrophilic brush layers.

Comparative Study of Polymer-Grafted BaTiO3 Nanoparticles Synthesized Using Normal ATRP as Well as ATRP and ARGET-ATRP with Sacrificial Initiator with a Focus on Controlling the Polymer Graft Density and Molecular Weight.

Structurally well-defined polymer-grafted nanoparticle hybrids are highly sought after for a variety of applications, such as antifouling, mechanical reinforcement, separations, and sensing. Herein, we report the synthesis of poly(methyl methacrylate) grafted- and poly(styrene) grafted-BaTiO3 nanoparticles using activator regeneration via electron transfer (ARGET ATRP) with a sacrificial initiator, atom transfer radical polymerization (normal ATRP), and ATRP with sacrificial initiator, to understand the role of the polymerization procedure in influencing the structure of nanoparticle hybrids. Irrespective of the polymerization procedure adopted for the synthesis of nanoparticle hybrids, we noticed PS grafted on the nanoparticles showed moderation in molecular weight and graft density (ranging from 30,400 to 83,900 g/mol and 0.122 to 0.067 chain/nm2) compared to PMMA-grafted nanoparticles (ranging from 44,620 to 230,000 g/mol and 0.071 to 0.015 chain/nm2). Reducing the polymerization time during ATRP has a significant impact on the molecular weight of polymer brushes grafted on the nanoparticles. PMMA-grafted nanoparticles synthesized using ATRP had lower graft density and considerably higher molecular weight compared to PS-grafted nanoparticles. However, the addition of a sacrificial initiator during ATRP resulted in moderation of the molecular weight and graft density of PMMA-grafted nanoparticles. The use of a sacrificial initiator along with ARGET offered the best control in achieving lower molecular weight and narrow dispersity for both PS (37,870 g/mol and PDI of 1.259) and PMMA (44,620 g/mol and PDI of 1.263) nanoparticle hybrid systems.

Formation of Antifouling Brushes on Various Substrates Using a Melanin-Inspired Initiator Film.

In this study, we developed a substrate-independent initiator film that can undergo surface-initiated polymerization to form an antifouling brush. Inspired by the melanogenesis found in nature, we synthesized a tyrosine-conjugated bromide initiator (Tyr-Br) that contains phenolic amine groups as the dormant coating precursor and α-bromoisobutyryl groups as the initiator. The resultant Tyr-Br was stable under ambient air conditions and underwent melanin-like oxidation only in the presence of tyrosinase to form an initiator film on various substrates. Subsequently, an antifouling polymer brush was formed using air-tolerant activators regenerated by electron transfer for atom transfer radical polymerization (ARGET ATRP) of zwitterionic carboxybetaine. The entire surface coating procedure, including the initiator layer formation and ARGET ATRP, occurred under aqueous conditions and did not require organic solvents or chemical oxidants. Therefore, antifouling polymer brushes can be feasibly formed not only on experimentally preferred substrates (e.g., Au, SiO2, and TiO2) but also on polymeric substrates such as poly(ethylene terephthalate) (PET), cyclic olefin copolymer (COC), and nylon.

Hydrophilic Aldehyde-Functional Polymer Brushes: Synthesis, Characterization, and Potential Bioapplications.

Surface-initiated activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) is used to polymerize a cis-diol-functional methacrylic monomer (herein denoted GEO5MA) from planar silicon wafers. Ellipsometry studies indicated dry brush thicknesses ranging from 40 to 120 nm. The hydrophilic PGEO5MA brush is then selectively oxidized using sodium periodate to produce an aldehyde-functional hydrophilic PAGEO5MA brush. This post-polymerization modification strategy provides access to significantly thicker brushes compared to those obtained by surface-initiated ARGET ATRP of the corresponding aldehyde-functional methacrylic monomer (AGEO5MA). The much slower brush growth achieved in the latter case is attributed to the relatively low aqueous solubility of the AGEO5MA monomer. X-ray photoelectron spectroscopy (XPS) analysis confirmed that precursor PGEO5MA brushes were essentially fully oxidized to the corresponding PAGEO5MA brushes within 30 min of exposure to a dilute aqueous solution of sodium periodate at 22 °C. PAGEO5MA brushes were then functionalized via Schiff base chemistry using an amino acid (histidine), followed by reductive amination with sodium cyanoborohydride. Subsequent XPS analysis indicated that the mean degree of histidine functionalization achieved under optimized conditions was approximately 81%. Moreover, an XPS depth profiling experiment confirmed that the histidine groups were uniformly distributed throughout the brush layer. Surface ζ potential measurements indicated a significant change in the electrophoretic behavior of the zwitterionic histidine-functionalized brush relative to that of the non-ionic PGEO5MA precursor brush. The former brush exhibited cationic character at low pH and anionic character at high pH, with an isoelectric point being observed at around pH 7. Finally, quartz crystal microbalance studies indicated minimal adsorption of a model globular protein (BSA) on a PGEO5MA brush-coated substrate, whereas strong protein adsorption via Schiff base chemistry occurred on a PAGEO5MA brush-coated substrate.

Highly sensitive fluorescence detection of tobacco mosaic virus RNA based on polysaccharide and ARGET ATRP double signal amplification

Plant diseases caused by tobacco mosaic viruses (TMV) reduce the yield and quality of crops and cause significant losses. Early detection and prevention of TMV has important value of research and reality. Herein, a fluorescent biosensor was constructed for highly sensitive detection of TMV RNA (tRNA) based on the principle of base complementary pairing, polysaccharides and atom transfer radical polymerization by electron transfer activated regeneration catalysts (ARGET ATRP) as double signal amplification strategy. The 5′-end sulfhydrylated hairpin capture probe (hDNA) was first immobilized on amino magnetic beads (MBs) by a cross-linking agent, which specifically recognizes tRNA. Then, chitosan binds to BIBB, providing numerous active sites for fluorescent monomer polymerization, which successfully significantly amplifying the fluorescent signal. Under optimal experimental conditions, the proposed fluorescent biosensor for the detection of tRNA has a wide detection range from 0.1 pM to 10 nM (R2 = 0.998) with a limit of detection (LOD) as low as 1.14 fM. In addition, the fluorescent biosensor showed satisfactory applicability for the qualitative and quantitative analysis of tRNA in real samples, thereby demonstrating the potential in the field of viral RNA detection.