Complex Terrain Areas Research Articles

A Spatial Interpolation Method for Meteorological Data Based on a Hybrid Kriging and Machine Learning Approach

ABSTRACTConventional spatial interpolation methods for meteorological data are usually based on linear interpolation. However, with the improvements in the temporal and spatial resolution of observational data, local neighbouring stations are susceptible to the influence of underlying surface changes and high terrain gradients. Moreover, for interpolation at a single time point, the inability to extract continuous change information effectively from adjacent times limits the interpolation performance. In this paper, an improved hybrid deep learning‐kriging method is proposed that combines a graph neural networks (GNNs) prediction model with the kriging interpolation algorithm. The GNNs considers dynamic changes over time and combines spatial and temporal information to estimate (interpolate) meteorological data at target weather stations using reanalysis data as input. The experimental results show that the hybrid method exhibits good performance in interpolating station data in complex terrain areas and under uneven surface conditions. The interpolation effectiveness of this method is markedly improved compared to that of traditional kriging methods. Moreover, when applied to station‐to‐grid interpolation, the hybrid method still provides better interpolation results than those of kriging methods. Therefore, this research provides a new method and perspective for meteorological data interpolation.

Terminal Doppler Weather Radar Retrievals in Complex Terrain during a Summer High Ozone Period

Abstract Out of the 45 radars composing the Terminal Doppler Weather Radar (TDWR) network, 21 are located in areas of complex terrain. Their mission to observe low-level wind shear at major airports prone to strong shear-induced accidents puts them in an ideal position to fill critical boundary layer observation gaps within the NEXRAD network in these regions. Retrievals such as velocity azimuth display and velocity volume processing (VVP) are used to create time-height profiles of the boundary layer from radar conical scans, but assume that a wide area around the radar is horizontally homogeneous. This assumption is rarely met in regions of complex terrain. This paper introduces a VVP retrieval with limited radius to make these profiling techniques informative for flows affected by topography. These retrievals can be applied to any operational radar to help examine critical boundary layer processes. VVP retrievals were derived from the TDWR for Salt Lake City International Airport, TSLC, during a summertime high ozone period. These observations highlighted thermally driven circulations and variations in boundary layer depth at high vertical and temporal resolution and provided insight on their influence on air quality. Significance Statement Residents in many urban areas of the United States are exposed to elevated ozone concentrations during the summer months. In complex terrain, thermally driven circulations and terrain-forced flows affect chemical processes by modulating mixing and transport. A novel technique to monitor local boundary layer conditions on small horizontal length scales was applied to data from the Terminal Doppler Weather Radar located near Salt Lake City International Airport during a multiday high ozone event, and effects of these flows on ozone concentrations are illustrated. This technique can be applied to other operational weather radars to create long-term and real-time records of near-surface processes at high vertical and temporal resolution.

Study on Downscaling Correction of Near-Surface Wind Speed Grid Forecasts in Complex Terrain

Accurate forecasting of wind speeds is a crucial aspect of providing fine-scale professional meteorological services (such as wind energy generation and transportation operations etc.). This article utilizes CMA-MESO model forecast data and CARAS-SUR_1 km ground truth grid data from January, April, July, and October 2022, employing the random forest algorithm to establish and evaluate a downscaling correction model for near-surface 1 km resolution wind-speed grid forecast in the complex terrain area of northwestern Hebei Province. The results indicate that after downscaling correction, the spatial distribution of grid forecast wind speeds in the entire complex terrain study area becomes more refined, with spatial resolution improving from 3 km to 1 km, reflecting fine-scale terrain effects. The accuracy of the corrected wind speed forecast significantly improves compared to the original model, with forecast errors showing stability in both time and space. The mean bias decreases from 2.25 m/s to 0.02 m/s, and the root mean square error (RMSE) decreases from 3.26 m/s to 0.52 m/s. Forecast errors caused by complex terrain, forecast lead time, and seasonal factors are significantly reduced. In terms of wind speed categories, the correction significantly improves forecasts for wind speeds below 8 m/s, with RMSE decreasing from 2.02 m/s to 0.59 m/s. For wind speeds above 8 m/s, there is also a good correction effect, with RMSE decreasing from 2.20 m/s to 1.65 m/s. Selecting the analysis of the Zhangjiakou strong wind process on 26 April 2022, it was found that the downscaled corrected forecast wind speed is very close to the observed wind speed at the station and the ground truth grid points. The correction effect is particularly significant in areas affected by strong winds, such as the Bashang Plateau and valleys, which has significant reference value.

Intercomparison of Machine Learning Models for Spatial Downscaling of Daily Mean Temperature in Complex Terrain

We compare three machine learning models—artificial neural network (ANN), random forest (RF), and convolutional neural network (CNN)—for spatial downscaling of temperature at 2 m above ground (T2M) from a 9 km ERA5-Land reanalysis to 1 km in a complex terrain area, including the Non Valley and the Adige Valley in the Italian Alps. The results suggest that CNN performs better than the other methods across all seasons. RF performs similar to CNN, particularly in spring and summer, but its performance is reduced in winter and autumn. The best performance was observed in summer for CNN (R2 = 0.94, RMSE = 1 °C, MAE = 0.78 °C) and the lowest in winter for ANN (R2 = 0.79, RMSE = 1.6 °C, MAE = 1.3 °C). Elevation is an important predictor for ANN and RF, whereas it does not play a significant role for CNN. Additionally, CNN outperforms others even without elevation as an additional feature. Furthermore, MAE increases with higher elevation for ANN across all seasons. Conversely, MAE decreases with increased elevation for RF and CNN, particularly for summer, and remains mostly stable for other seasons.

Comparison of five methods for improving the accuracy of SRTM3 DEM and TanDEM-X DEM in the Qinghai-Tibet Plateau using ICESat-2 data

ABSTRACT The accuracy of digital elevation models (DEMs) is crucial for practical applications in complex terrain. In this study, various correction models were employed to evaluate and correct the 90 m SRTM3 DEM and TanDEM-X DEM data in the Qinghai-Tibet Plateau region. A simple and universal three-dimensional data co-registration method was utilized for horizontal alignment. The study demonstrated a significant reduction in horizontal discrepancies between datasets after data co-registration. By comparing the performance of five different correction methods, it was found that the RF model exhibited excellent accuracy and robustness, making it particularly suitable for applications that require high precision. The XGB and BPNN models offer a good balance between accuracy and time efficiency, making them suitable for research scenarios that are less sensitive to precision requirements. In contrast, the MLR and IDW methods performed poorly and are not recommended for high-precision applications. Furthermore, the corrected DEMs showed improved resistance to the influence of high slopes, enhancing their applicability in complex terrain areas. This study provides an important reference for the correction of high-quality DEMs in the Qinghai-Tibet Plateau region and offers valuable insights for DEM research in similar areas.

A dataset of surface water area with 12-day resolution in Lijiang River Basin from 2015 to 2022

Widely distributed in Guangxi, Karst landforms are characterized by heavy rainfall during the flood season, rapid hydrological dynamics, and notable spatiotemporal variations. A water is an important ecological foundation and natural resource, the timely and accurate acquisition of spatiotemporal changes in surface water bodies holds practical significance for the protection and management of water resources, rapid assessment of drought and flood disasters, and the realization of sustainable development across various economic industries. This dataset takes the Lijiang River Basin in Guilin, Guangxi as the research area. Addressing prevalent challenges such as infrequenct surface water monitoring, limited water body extraction methods due to sparse sample information, and low extraction accuracy in complex terrain areas, we combined the data from Sentinel-1 radar and Sentinel-2 in the study. Considering the different imaging principles of radar and optical sensors, we developed a vector classification method based on empirical thresholds for optical and other multi-source remote sensing data. The method can effectively eliminate interference of most ground object shadows, allowing for the construction of dataset of surface water area with 12-day resolution in Lijiang River Basin from 2015 to 2022. The dataset comprises a total of 196 periods of surface water body vector data. According to the results after verifying the spatial distribution and quantitative accuracy of the dataset, the dataset demonstrates its capability to accurately extract inlets and outlets of rivers, lakes and reservoirs, as well as small water bodies in complex terrain areas. The overall accuracy reaches 92.73%,with a Kappa coefficient of 0.85. This dataset can be used to support water resources protection and sustainable management of the ecological environment in the Lijiang River Basin. Additionally, it can provide reliable data for decision-making in areas such as emergency management, disaster prevention, water conservancy development, and economic development.

Optimization Study of Soil Organic Matter Mapping Model in Complex Terrain Areas: A Case Study of Mingguang City, China

Traditional soil organic matter mapping is mostly polygonal drawing, which is even more difficult to accurately depict in complex terrain areas. The spatial distribution of soil organic matter is closely related to agricultural production, natural resources, environmental governance, and socio-economic development. Efficiently, economically, and accurately obtaining information on changes in soil organic matter in areas with diverse topography is an urgent problem to be solved. Mingguang City has a high research value because of its unique topography and natural landscape. To solve the problem of soil organic matter mapping in this area, this study will construct an excellent organic matter prediction model. Using 173 soil survey samples (123 for training and 50 for testing), the optimal feature variable subsets selected from 31 environmental variables through Pearson correlation, stepwise regression-variance inflation factor, and recursive feature elimination models based on different algorithms were employed. Each selected feature subset was then used to construct organic matter prediction models using multiple advanced machine learning algorithms. By comparing accuracy validation and model performance, the organic matter prediction model suitable for Mingguang City (RFE-RF_SVM) was obtained, that is, the prediction model of organic matter based on support vector machines with the feature variables screened by the feature recursive elimination algorithm of random forest with RMSE = 3.504, VSI = 0.036, and R-squared = 0.730. Furthermore, the analysis focused on assessing the significance of the predictive factors. The mapping results of this study show that the soil organic matter content in the central and northwestern parts of the study area is low, and the reasons for this situation are different. The central part is mainly caused by the change of land use and topography, while the northwestern part is caused by the loose soil structure caused by the parent material. The government can take targeted measures to improve the soil in the areas with poor organic matter.

Added value of amateur observational network for high-resolution climatological analysis: a case study in the aterno valley, abruzzo, Italy

The ecological transition calls for an increasing need for local climate services. A fine spatial characterization of atmospheric relevant quantities (temperature, precipitation, humidity, wind, solar radiation, etc.) at long-term climatological scales is typically based on observational networks run by public entities such as the European Union (e.g. Copernicus services) and national and regional Agencies (e.g. National Met Office, Hydrographic Offices). The aim of this work is to verify if the density of these networks is adequate to represent the variability over the territory, with particular regard to a complex terrain area such as the Aterno river Valley in Abruzzo, Central Italy. We use a combination of public networks and the available dense amateur network of weather stations. We subject the database to careful data quality check both in terms of temporal and spatial anomalies. We found that the public network is generally adequate to represent the spatial and temporal variability over the area in terms of temperature and precipitation, but this is not the case for wind and relative humidity for the lack of sensors. We suggest that an integration of public and non-institutional observational networks is desirable for a finer climatological characterization of a complex territory and for allowing the description of more phenomena, in order to better inform adaptation measures with respect to climate change.

Multisource elevations strategy obtaining robust seed points and reference surfaces for ground points extraction in complex terrain area

The appearance of unmanned aerial vehicle photogrammetry and airborne lidar makes it possible to obtain measurement data for complex terrains such as gullies and mountainous regions. However, extracting ground points from these abundant and massive measurement datasets is challenging. In traditional extractions, their essence is to determine the surfaces that can describe the terrain from the seed points in the grid and use them as the basis for separating non-ground points. For effective extraction, this study proposes a multisource elevations strategy (MES) obtaining robust seed points and reference surfaces. First, two-level extended grids were constructed as the basic units. Then, to select more robust values between measurement and interpolation elevations, an elevation-determination rule was established for seed points. After, based fitting and interpolation elevations of grid nodes, the correction range is determined and the elevation is corrected for reference surfaces. In two representative complex terrain areas, when non-ground points were marked as seed points, the MES effectively reduced the phenomenon of seed points moving away from the ground. Reference surfaces can also accurately represent the global change trend and local elevation of the ground in areas where the terrain changes rapidly. This strategy provides a new thinking for ground point extraction from point cloud.

A New Classification Rule-Set for Mapping Surface Water in Complex Topographical Regions Using Sentinel-2 Imagery

Surface water is a critical natural resource, but its mapping accuracy is vulnerable to cloud cover, snow, shadows, and diverse roofing materials. Recognizing the limitations of a single threshold segmentation method that fails to achieve high-precision extraction of surface water in complex terrain areas, this study introduces a multiple threshold water detection rule (MTWDR) method to improve water extraction results. This method uses the multi-band reflectance characteristics of ground features to construct a water index and combines brightness features with the Otsu algorithm to eliminate interference from highly reflective ground features like ice, snow, bright material buildings, and clouds. The Yunan–Guizhou Plateau was selected as the study area due to its complex terrain and multiple types of surface water, and experiments were conducted using Sentinel-2 data on the Google Earth Engine (GEE). The results demonstrate that: (1) The proposed method achieves an overall accuracy of 94.08% and a kappa coefficient of 0.8831 in mountainous areas. In urban areas, the overall accuracy reaches 95.15%, accompanied by a kappa coefficient of 0.8945. (2) Compared to five widely used water indexes and rules, the MTWDR method improves accuracy by more than 3%. (3) It effectively overcomes interference from highly reflective ground features while maintaining the integrity and accuracy of water boundary extraction. In conclusion, the proposed method enhances extraction accuracy across different types of surface water within complex terrain areas, and can provide significant theoretical implications and practical value for researching and applying surface water resources.

A novel dual polarization multiplexing RoF system integrating optical fiber and FSO channel with AMI downlink signals

Using dual polarization multiplexing alternate mark inversion (AMI) downlink signals, a novel radio over fiber (RoF) system integrating optical fiber and FSO channel is designed to adapt to applications in mountainous areas and other complex terrain areas. Optical heterodyne technology and self-mixing homodyne detection method are used to realize high sensitivity detection of the received signals after 25.1 km channel (including 1 km single-mode fiber and 100 m free space link) transmission. Moreover, polarization multiplexing technology is introduced to exponentially increase the transmission capacity of downlink signals. This scheme not only can be compatible with traditional optical fiber transmission systems, but also support the wireless optical access application of millimeter wave signals in RoF systems.

Exploring the geological structure of a large-scale landslide using semi-airborne TEM in the Karst area of southwest China

Abstract The karst strata in the southwestern mountainous areas of China are extensively developed, creating a fragile geological environment. Landslide geological disasters occur frequently in these areas due to high annual rainfall, concentrated time periods, and frequent human engineering activities. Conventional ground geophysical methods face challenges in complex terrains, making it difficult to quickly and reliably obtain underground structures in landslide-prone areas. The semi-airborne transient electromagnetic method (SATEM) combines ground-based transmission and airborne reception of electromagnetic responses. This method, characterized by large emission magnetic moment and rapid data collection in the air, offers advantages in detecting deep geological structures in complex terrain areas. This article presents the application of a newly developed loop source SATEM system, integrated with multi-rotor unmanned aerial vehicles (UAVs), to conduct deep geological structure detection experiments on a large-scale landslide. The inversion results clearly depict the spatial distribution of the Feixianguan Formation and Longtan Formation, as well as vertical fractures developed in the strata due to underground coal mining. The detection test demonstrates the applicability of the SATEM method in detecting underground structures in Karst Plateau special landform areas, providing a new detection approach for similar regions.

Deep Learning for Daily 2‐m Temperature Downscaling

AbstractThis study proposes a novel method, which is a U‐shaped convolutional neural network that combines non‐local attention mechanisms, Res2net residual modules, and terrain information (UNR‐Net). The original U‐Net method and the linear regression (LR) method are conducted as benchmarks. Generally, the UNR‐Net has demonstrated promise in performing a 10× downscaling for daily 2‐m temperature over North China with lead times of 1–7 days and shows superiority to the U‐Net and LR methods. To be specific, U‐Net and UNR‐Net demonstrate higher Nash‐Sutcliffe Efficiency coefficient values compared to LR by 0.052 and 0.077, respectively. The corresponding improvements in pattern correlation coefficient are 0.013 and 0.016, while the root mean square error values are higher by 0.22 and 0.338, respectively. Additionally, the structural similarity index metric is higher by 0.033 and lower by 0.015. Furthermore, regions with significant errors are primarily distributed in complex terrain areas such as the Taihang Mountains, where UNR‐Net exhibits noticeable improvements. In addition, the 12 components‐based error decomposition method is proposed to analyze the error source of different models. Generally, the smallest errors are observed during the summer season and the sequence error component is proven to be the main source error of 2‐m temperature forecasts. Furthermore, UNR‐Net consistently demonstrates the lowest errors among all 12 error components. Therefore, combining the numerical weather prediction model and deep learning method is very promising in downscaling temperature forecasts and can be applied to routine forecasting of other atmospheric variables in the future.

Efficient 3D Frequency Semi-Airborne Electromagnetic Modeling Based on Domain Decomposition

Landslides are common geological hazards that often result in significant casualties and economic losses. Due to their occurrence in complex terrain areas, conventional geophysical techniques face challenges in early detection and warning of landslides. Semi-airborne electromagnetic (SAEM) technology, utilizing unmanned aerial platforms for rapid unmanned remote sensing, can overcome the influence of complex terrain and serve as an effective approach for landslide detection and monitoring. In response to the low computational efficiency of conventional semi-airborne EM 3D forward modeling, this study proposes an efficient forward modeling method. To handle arbitrarily complex topography and geologic structures, the unstructured tetrahedron mesh is adopted to discretize the earth. Based on the vector finite element formula, the Dual–Primal Finite Element Tearing and Interconnecting (FETI-DP) method is further applied to enhance modeling efficiency. It obtains a reduced order subsystem and avoids directly solving huge overall linear equations by converting the entirety problem into the interface problem. We check our algorithm by comparing it with 1D semi-analytical solutions and the conventional finite element method. The numerical experiments reveal that the FETI-DP method utilities less memory and exhibits higher computation efficiency than the conventional methods. Additionally, we compare the electromagnetic responses with the topography model and flat earth model. The comparison results indicate that the effect of topography cannot be ignored. Further, we analyze the characteristic of electromagnetic responses when the thickness of the aquifer changes in a landslide area. We demonstrate the effectiveness of the 3D SAEM method for landslide detection and monitoring.

Modeling the Air Pollution and Aerosol‐PBL Interactions Over China Using a Variable‐Resolution Global Model

AbstractModeling air quality has always been a challenge in global models constrained by coarse grids. Here, the variable‐resolution Community Atmosphere Model with full chemistry based on the scalable spectral element (SE) dynamical core (MUSICAv0) is applied in simulating air pollution with a finer grid resolution of ∼0.25° over East Asia (SE_VR), in contrast to the same model with a uniform resolution of ∼1.0° (SE_UR). Two nudging experiments and four free‐running experiments are conducted to investigate the capabilities of SE_VR in modeling the air pollution and aerosol‐planetary boundary layer (PBL) interactions over China. Results show the regional refinement in SE_VR is essential for simulating haze events over complex terrain areas attributed to its better performance in representing the local vertical and horizontal dispersion conditions. SE_VR shows prominent advantages over SE_UR in simulating surface ozone because of better resolving spatial segregation of NOx and volatile organic compounds (VOC) chemical regimes and subsequently representing more detailed chemical processes related to ozone formation, although the model generally overestimates surface ozone over China. Further analysis of SE_VR shows the daytime radiative effect of black carbon (BC) aerosols lowers PBL height by 12.0% (17.9%), and leads to an increase of PM2.5 by 14.5% (10.8%) under the moderate (severe) air pollution conditions over Sichuan Basin. However, SE_UR has deficiencies in simulating BC‐PBL interactions due to its inability to reproduce the strong inverse temperature structure caused by BC aerosols in the lower atmosphere layer. Our results highlight the value of variable‐resolution global models for simulating air pollution and its interactions with climate.

Variation characteristics and coordinated emission reduction of air pollutants in megacity of Chengdu-Chongqing economic circle under dual carbon goal

The air pollution process and impact mechanism of megacities located in complex terrain are particularly complex. As a typical megacity in China, Chengdu has unique topographical and meteorological conditions, and its pollution control is difficult. This study systematically elucidated the variation characteristics of six criteria air pollutants in Chengdu between 2014 and 2020. Besides, the PM<sub>2.5</sub>/PM<sub>10</sub> and NO<sub>2</sub>/SO<sub>2</sub> ratios were discussed. Furthermore, a detailed analysis of the correlation between air pollutants was carried out. Finally, the collaborative path of carbon reduction and air pollution control is discussed. The results indicated that SO<sub>2</sub>, PM<sub>2.5</sub>, PM<sub>10</sub> and CO were significantly decreased by 62.9%, 50.8%, 45.5%, and 36.7%, respectively. PM<sub>2.5</sub> and O<sub>3</sub> compliance rates are very low, and O<sub>3</sub> increases with fluctuations. SO<sub>2</sub>, NO<sub>2</sub>, CO, PM showed a “U-shaped” seasonal variation, and there was a “seesaw” phenomenon between O<sub>3</sub> and PM<sub>2.5</sub>. The continuous changing trends also found in the ratios of PM<sub>2.5</sub>/PM<sub>10</sub> and NO<sub>2</sub>/SO<sub>2</sub>. The results highlight the importance of coordinated reduction of carbon emissions and pollutants in Chengdu. This research can improve the prediction accuracy of air pollution in complex terrain areas under global warming, and improve the understanding of the formation mechanism of air pollution in special terrains around the world.

An Ensemble Forecast Wind Field Correction Model with Multiple Factors and Spatio-Temporal Features

Accurate wind speed prediction is significantly important for the full utilization of wind energy resources and the improvement in the economic benefits of wind farms. Because the ensemble forecast takes into account the uncertainty of information about the atmospheric motion, domestic and foreign weather service forecast centers often choose to use the ensemble numerical forecast to achieve the fine forecast of wind speed. However, due to the unavoidable systematic errors of the ensemble numerical forecast model, it is necessary to correct the deviation in the ensemble numerical forecast wind speed. Considering the typical spatio-temporal characteristics of the grid prediction data of the wind field, based on Convolutional Long–Short Term Memory (ConvLSTM) units and attention mechanism, this paper takes the complex and representative North China region as the research area, aiming to reveal the shortcomings of existing deep learning integrated prediction correction models in extracting temporal features of grid prediction data. We propose a new ensemble prediction wind field correction model integrating multi-factor and spatio-temporal characteristics. This model uses reanalyzed land data provided by the European Center for Medium-Range Weather Forecasts as the real data to correct the deviation in the near-surface 10 m wind field data predicted by the regional ensemble numerical prediction model of the China Meteorological Administration. We used the reanalyzed land data provided by the European Centre for Medium-Range Weather Forecasts (ECMWF) as the live data to correct the deviation in the near-surface 10 m wind field data predicted by the regional ensemble numerical forecast model of the China Meteorological Administration (CMA). At the same time, Root Mean Square Error (RMSE) and Mean Absolute Error (MAE) were used as the scoring indicators, and the results of the China Meteorological Administration–Regional Ensemble Prediction System (CMA–REPS) ensemble average, multiple linear regression method correction, Long–Short Term Memory (LSTM) method correction, and U-net (UNET) method correction were compared. Compared with the UNET model method, the experimental results show that when processing the 10 m zonal wind data, 10 m meridional wind data, and 10 m average wind speed data of CMA–REPS 24 h forecasts, the correction results of our model can reduce the RMSE score index by 9.15%, 4.83%, and 7.79%. At the same time, when processing the 48 h and 72 h near-surface 10 m wind field data of the CMA–REPS forecast, our model can improve the prediction accuracy of CMA–REPS near-surface wind forecast data. Therefore, the correction effect of the proposed model in a complex terrain area is evidently better compared to other methods.

Assessing the Accuracy of 3D-VAR in Supercell Thunderstorm Forecasting: A Regional Background Error Covariance Study

Data assimilation (DA) integrates observational data with numerical weather predictions to enhance weather forecast accuracy. This study evaluates three regional background error (BE) covariance statistics for numerical weather prediction (NWP) via a variational data assimilation (VAR) scheme. The best practices in DA are highlighted, as well as the impact of BE covariance calculation in DA procedures by employing the Weather Research and Forecasting (WRF) model. Forecasts initialized at different intervals were used to compute distinct regional background error statistics utilizing three control variable (CV) methodologies over a span of 20 days. These statistics are used by the three-dimensional VAR DA process of WRF DA software, producing analysis fields that lead to forecasts for a distinct convective supercell event during the summer of 2019 over northern Greece. This high-impact convective event underscores the importance of selecting appropriate BE over complex terrain areas. The results emphasize the significance of BE usage in DA, proposing the optimal DA approach for simulations of convective systems.

Influence of Grain on Green Patterns and Their Underlying Surface Characteristics on Water Conservation: A Case Study in a Semiarid Area

Water-conservation enhancement is a crucial objective of regional ecological restoration projects in arid and semiarid areas, and it is significantly influenced by land use/cover change (LUCC). The Grain for Green Project (GFGP) is a common strategy for ecological restoration. However, insufficient attention has been paid to the impact of reforestation patterns and the underlying surface characteristics on the effectiveness of GFGP in enhancing water conservation. In this study, a Soil and Water Assessment Tool (SWAT) scenario-based simulation was conducted to assess changes in water-conservation depth (WCD) in the Zhangjiakou section of the Guanting Reservoir basin. Redundancy analysis (RDA) and a mixed linear model were employed to determine the effects of different reforestation patterns and their underlying slope gradient and soil-type characteristics on WCD variation. The results showed that there were differences in the effect characteristics of reforestation patterns and different vegetation types on WCD changes; the effectiveness of increased water conservation is associated with the adaptation of reforestation plants to underlying characteristics. Returning farmland to evergreen forests was the most effective approach, leading to a relative increase in WCD that was 2.6 times greater than the relative increase in total WCD. WCD decreased with the slope gradient, with WCD decreasing by 0.2 mm for every 1° increase in slope. Converting grassland to evergreen forests on slopes greater than 16.19° and converting deciduous forests to grassland on slopes less than 16.19° would further increase WCD, promoting the synergistic development of ecosystem services. This study provides insights into the development of more efficient reforestation strategies to enhance water conservation in a complex terrain area.

Supporting Advancement in Weather and Water Prediction in the Upper Colorado River Basin: The SPLASH Campaign

Abstract Water is a critical resource that causes significant challenges to inhabitants of the western United States. These challenges are likely to intensify as the result of expanding population and climate-related changes that act to reduce runoff in areas of complex terrain. To better understand the physical processes that drive the transition of mountain precipitation to streamflow, the National Oceanic and Atmospheric Administration has deployed suites of environmental sensors throughout the East River watershed of Colorado as part of the Study of Precipitation, the Lower Atmosphere, and Surface for Hydrometeorology (SPLASH). This includes surface-based sensors over a network of five different observing sites, airborne platforms, and sophisticated remote sensors to provide detailed information on spatiotemporal variability of key parameters. With a 2-yr deployment, these sensors offer detailed insight into precipitation, the lower atmosphere, and the surface, and support the development of datasets targeting improved prediction of weather and water. Initial datasets have been published and are laying a foundation for improved characterization of physical processes and their interactions driving mountain hydrology, evaluation and improvement of numerical prediction tools, and educational activities. SPLASH observations contain a depth and breadth of information that enables a variety of atmospheric and hydrological science analyses over the coming years that leverage collaborations between national laboratories, academia, and stakeholders, including industry.