Contact Area Research Articles

Spatiotemporal characterization of extracellular matrix maturation in human artificial stromal-epithelial tissue substitutes

Abstract Background Tissue engineering techniques offer new strategies to understand complex processes in a controlled and reproducible system. In this study, we generated bilayered human tissue substitutes consisting of a cellular connective tissue with a suprajacent epithelium (full-thickness stromal-epithelial substitutes or SESS) and human tissue substitutes with an epithelial layer generated on top of an acellular biomaterial (epithelial substitutes or ESS). Both types of artificial tissues were studied at sequential time periods to analyze the maturation process of the extracellular matrix. Results Regarding epithelial layer, ESS cells showed active proliferation, positive expression of cytokeratin 5, and low expression of differentiation markers, whereas SESS epithelium showed higher differentiation levels, with a progressive positive expression of cytokeratin 10 and claudin. Stromal cells in SESS tended to accumulate and actively synthetize extracellular matrix components such as collagens and proteoglycans in the stromal area in direct contact with the epithelium (zone 1), whereas these components were very scarce in ESS. Regarding the basement membrane, ESS showed a partially differentiated structure containing fibronectin-1 and perlecan. However, SESS showed higher basement membrane differentiation, with positive expression of fibronectin 1, perlecan, nidogen 1, chondroitin-6-sulfate proteoglycans, agrin, and collagens types IV and VII, although this structure was negative for lumican. Finally, both ESS and SESS proved to be useful tools for studying metabolic pathway regulation, revealing differential activation and upregulation of the transforming growth factor-β pathway in ESS and SESS. Conclusions These results confirm the relevance of epithelial-stromal interaction for extracellular matrix development and differentiation, especially regarding basement membrane components, and suggest the usefulness of bilayered artificial tissue substitutes to reproduce ex vivo the extracellular matrix maturation and development process of human tissues. Graphical Abstract

Preclinical Experimental Study on New Cervical Implant Design to Improve Peri-Implant Tissue Healing

Objectives: In this preclinical study, we used an experimental rabbit model to investigate the effects of a new implant design that involves specific changes to the cervical portion, using a conventional implant design in the control group. Materials and Methods: We used 10 rabbits and 40 dental implants with two different macrogeometries. Two groups were formed (n = 20 per group): the Collo group, wherein implants with the new cervical design were used, which present a concavity (reduction in diameter) in the first 3.5 mm, the portion without surface treatment; the Control group, wherein conical implants with the conventional design were used, with surface treatment throughout the body. All implants were 4 mm in diameter and 10 mm in length. The initial implant stability quotient (ISQ) was measured immediately after the implant insertion (T1) and sample removal (T2 and T3). The animals (n = five animals/time) were euthanized at 3 weeks (T1) and 4 weeks (T2). Histological sections were prepared and the bone–implant contact (BIC%) and tissue area fraction occupancy (TAFO%) percentages were analyzed in the predetermined cervical area; namely, the first 4 mm from the implant platform. Results: The ISQ values showed no statistical differences at T1 and T2 (p = 0.9458 and p = 0.1103, respectively) between the groups. However, at T3, higher values were found for the Collo group (p = 0.0475) than those found for the Control group. The Collo samples presented higher BIC% values than those of the Control group, with statistical differences of p = 0.0009 at 3 weeks and p = 0.0007 at 4 weeks. There were statistical differences in the TAFO% (new bone, medullary spaces, and the collagen matrix) between the groups at each evaluation time (p < 0.001). Conclusions: Considering the limitations of the present preclinical study, the results demonstrate that the new implant design (the Collo group) had higher implant stability (ISQ) values in the samples after 4 weeks of implantation. Furthermore, the histomorphometric BIC% and TAFO% analyses showed that the Collo group had higher values at both measurement times than the Control group did. These findings indicate that changes made to the cervical design of the Collo group implants may benefit the maintenance of peri-implant tissue health.

Combined Impedance and Electron Paramagnetic Resonance Spectroscopy for Investigating the Dynamics of Li/Solid Li‐ion Conductor Interfaces

AbstractElectrochemical impedance spectroscopy (EIS) is a widely used tool for the electrochemical characterization of all‐solid‐state batteries (ASSBs) with Li‐metal anodes. However, an unambiguous interpretation of the observed impedance response often requires additional independent information on the actual interfacial phenomena obtained. The measurement methodology presented in this study allows to conduct electron paramagnetic resonance (EPR) spectroscopy and EIS concurrently. Therefore, the informative power of EIS experiments can be significantly improved via monitoring of structural changes of paramagnetic lithium at the electrochemical interface. As the solid‐electrolyte‐lithium interface is a critical part of all‐solid‐state batteries, this study employs a model oxide solid electrolyte in contact with lithium metal. During the polarization of the cell with thin evaporated lithium electrodes, the ratio between positive and negative peaks (a/b) of the EPR signal momentarily rises, which indicates an accumulation of lithium on one side of the electrolyte. The peak ratio a/b then drops abruptly, accompanied by current irregularities. Both are indicative of a diminishing contact area, and as a result, finer lithium morphologies form. Shortly after that, a contact loss is observed. The change of the EPR signal shape before cell breakdown can hence be associated with the worsening Li‐electrolyte contact, providing a tool for physical in‐situ cell diagnostics.

Energy harvesting through the triboelectric nanogenerator (TENG) based on polyurethane/cellulose nanocrystal

This study investigates how physical and mechanical properties affect the performance of triboelectric nanogenerators (TENGs). Polyurethane (PU) was prepared using two methods: (i) one-step PU (non-chain extended polyurethane) and (ii) two-step PU (chain extended polyurethane) via the prepolymer method; both types were filled with different concentrations of nanocrystalline cellulose. Mechanical properties significantly influence the deformation at the material interface that occurs during contact or friction. Key surface characteristics, including surface energy, geometry, and physicochemical properties, affect the effective contact area and potential distribution. One-step PU with 0.1 % CNC demonstrates a maximum capacitance of 29.20 pF, a voltage of 2.04 V, an electric current of 0.43 µA and power of 0.89 µW, representing a 74.5 % increase in power compared to the neat one-step PU, exhibits significant potential for TENG applications. Performance improvements are associated with lower concentrations of cellulose nanocrystals, enhanced hydrogen bonding, and beneficial surface energy. The observed enhancements in output are attributed to improved internal polarization from well-dispersed crystalline nanocellulose, increased crystallinity of the soft segment, and reduced charge transfer mechanisms due to amino groups in the chain extender. However, the impact of the molecular structure and conformation of polyurethanes on triboelectrification remains unclear, highlighting the need for theoretical models and experimental data. This research provides a practical approach for developing stretchable triboelectric materials with enhanced mechanical properties, emphasizing the importance of considering factors such as mechanical parameters, nanofiller content, and surface physicochemical properties to optimize TENG design.

Effect of cutting fluid supply conditions on tool loads during continuous and interrupted orthogonal cutting

AbstractIn metalworking, cutting fluids play an important role by reducing heat and friction during machining, extending tool life, and improving surface finish. Although the positive effects of cutting fluid have been confirmed in many studies, the relevant cutting fluid parameters such as nozzle cross-section area and supply pressure, as well as their influence on the thermo-mechanical loads of the cutting tool, have been insufficiently investigated. This study investigates the effects of cutting fluid supply conditions on tool loads during continuous and interrupted orthogonal cutting processes. The research specifically addresses the impact of nozzle geometry and fluid jet orientation on the thermo-mechanical loads on the cutting tool, which have been underexplored in previous studies. A prototype tool holder, designed and additively manufactured for this purpose, allows for variations in nozzle geometry and jet orientation. Experiments were conducted under varying cutting parameters, nozzle geometries, and fluid pressures, with tool temperature being monitored through an embedded thermocouple. The results show that nozzle geometry significantly affects chip shape, which directly affects cooling efficiency and, consequently, tool temperature. The study also uses an inversely calibrated analytical model to analyze the tool temperature distribution, which shows that the highest temperatures occur in the tool-chip contact area, while temperatures outside this area decrease rapidly. In addition, the percentage of heat conducted into the tool decreases with increasing Péclet number, which is consistent in both continuous and interrupted cutting scenarios. These findings provide a deeper understanding of how cutting fluid nozzle design affects tool performance and establish a foundation for model-based temperature analysis in machining processes.

Discrete air model for large scale rapid filling process contained entrapped air

In this paper, a discrete air model (DAM) is developed to capture the discontinuous characteristics of air at different locations during the rapid filling process in long-range, large-scale water pipeline. By introducing the continuity and momentum equations of air and combining them with the water control equation and the interface continuity equation, an improved model based on the uniform air is derived. The accuracy of the model is verified by comparing it with experimental data and the results of the original uniform air model (UAM). Subsequently, a long-range, large-scale pipeline was considered to investigate the dynamic properties of air in large systems, which had not been covered in previous studies. Additionally, the influence of air dynamic characteristics on initial air volume affected by different air lengths and various pipe diameters in large systems – is further studied. Results show that an increased pipe diameter expands the contact area of the air–water interface, often resulting in the UAM underestimating the maximum peak pressure. The propagation process of transient waves in air is divided into three stages: propagation stage with multiple variation, maximum value stage with interface propulsive, and stability stage with several fluctuations, which corresponds to the pressure fluctuation curve. This explains the occurrence of small fluctuations and peaks in the curve. Therefore, the peak pressure simulated by the proposed DAM offers a better understanding of wave behaviours.

Contact area and tissue growth dynamics shape synthetic juxtacrine signaling patterns.

Cell-cell communication through direct contact, or juxtacrine signaling, is important in development, disease, and many areas of physiology. Synthetic forms of juxtacrine signaling can be precisely controlled and operate orthogonally to native processes, making them a powerful reductionist tool with which to address fundamental questions in cell-cell communication in vivo. Here we investigate how cell-cell contact length and tissue growth dynamics affect juxtacrine signal responses through implementing a custom synthetic gene circuit in Drosophila wing imaginal discs alongside mathematical modeling to determine synthetic Notch (synNotch) activation patterns. We find that the area of contact between cells largely determines the extent of synNotch activation, leading to the prediction that the shape of the interface between signal-sending and signal-receiving cells will impact the magnitude of the synNotch response. Notably, synNotch outputs form a graded spatial profile that extends several cell diameters from the signal source, providing evidence that the response to juxtacrine signals can persist in cells as they proliferate away from source cells, or that cells remain able to communicate directly over several cell diameters. Our model suggests the former mechanism may be sufficient, since it predicts graded outputs without diffusion or long-range cell-cell communication. Overall, we identify that cell-cell contact area together with output synthesis and decay rates likely govern the pattern of synNotch outputs in both space and time during tissue growth, insights that may have broader implications for juxtacrine signaling in general.

AFM Nanoindentation of Stiff Inhomogeneous Layer onPolymeric Substrate.

Analysis of indentation data of heterogeneous material, in particular, layer on an elastic substrate requires information about the contact area that is essential for calculating mechanical properties. The actual shape of the AFM-tip is not described by simple body of revolution. In this work, the indentation of a stiff layer on a hyperelastic substrate by a truncated conical tip is studied using finite element methods. The size of the tip, elastic modulus, and thickness of the layer are varied. The obtained model dependences of loading and contact area versus the depth of indentation are used in analysis of the experimental data of AFM indentation of stiff inhomogeneous nanolayers of polyurethane surface. Thickness and elastic modulus of the layers, fracture properties of the surface are studied. The obtained results can find application in the study of mechanical properties and fracture toughness of thin flexible films on an elastic substrate.

Evaluation of thin-threaded implants primary stability in type IV bone right after maxillary sinus floor elevation: A human cadaver study.

The bone-implant interface plays a crucial role in obtaining sufficient primary stability for dental implants in weak bone supports. The aim of this human cadaver study was to evaluate the primary stability of new thin-threaded implants when placed in type IV bone right after maxillary sinus floor elevation. The study followed the CACTUS (ChAracteristics of Cadaver Training and sUrgical Studies) guidelines. Twenty-four edentulous maxillary posterior zones with type IV bone and a residual bone height of 4mm were selected using computed tomography scans. First, an osteotome sinus floor elevation was performed (C.M.C Tech, IBS IMPLANT, Daejeon, South Korea). Implants with thin threads (MagiCore, IBS IMPLANT, Daejeon, South Korea) were placed simultaneously. Samples were divided into two groups: Group 1 (G1): 11mm-long implants with an elevation of 8mm; Group 2 (G2): 7mm-long implants with an elevation of 4mm. Primary stability was assessed using resonance frequency analysis (RFA). The average primary stability values in the mesiodistal (MD) direction were 45.67±3.09 Implant Stability Quotient (ISQ) for G1 and 38.76±16.94 ISQ for G2, and in the buccolingual direction were 43.33±13.23 ISQ for G1 and 38.47±16.14 ISQ for G2. The primary stability of the thin-threaded implants was compatible with clinical osseointegration in sinus sites with limited bone contact area in both experimental situations. Clinical studies are needed to confirm these encouraging results.

Developing an accurate finite element model for brake disc in contact with the pad using experimental modal analysis

The brake system is a critical safety component in cars, and its performance is essential for the safety of both the driver and passengers. The stability of the brake disc and understanding the contact area between the disc and the brake pads are crucial aspects of brake system design and performance. This paper aims to create an accurate model of the brake system, especially the contact area between the disc and the pads. This model can be used to investigate the effects of increasing braking pressure and changing the contact surface. Moreover, this model can calculate the dynamic responses of the system when an angular velocity is applied to the disc. First, a braking system was tested experimentally several times. Then a finite element model of the structure was created in ANSYS commercial software with defining suitable elements for the contact area between the disc and the pads. In the following, by an identification process a distribution of contact parameters at different braking pressures was obtained. The results shows that when the braking pressure increases, the dynamic responses of the structure increase, as well as the contact stiffness. A further increase in braking pressure does not have much effect on the contact stiffness and the contact area becomes like a new support.

Comparative Study of 3D Contact Area Percentage Between Zygomatic Implant and Bone in Different Surgical Approaches: Clinical and Biomechanical Perspectives.

Zygomatic implants, either alone or in combination with dental implant placement, have emerged as a viable surgical option for elderly patients with severe bone atrophy for occlusal restoration. This study aims to examine the biomechanical impact of the three-dimensional contact area between zygomatic implants and bone on biomechanics under different surgical methods. Using Cone Beam Computed Tomography (CBCT) images from 10 patients with severe bone atrophy, we reconstructed 3D maxillary bone models and created corresponding 3D zygomatic implant models. Two distinct surgical methods (extramaxillary or intrasinus approaches) were employed based on the position and angle of the zygomatic implant for each patient. The 3D bone-to-implant contact percentage (BIC%) was calculated, and finite element analysis with nonlinear contact was conducted to assess the relationship between 3D BIC% and surrounding bone stress for both surgical methods. The 3D BIC% of extramaxillary approach (57.63%) and intrasinus approach (56.49%) for total bone (including cortical and cancellous bone) was similar (P=0.425) in zygomatic implant surgery. In contrast, the intrasinus method exhibited higher 3D BIC% in cortical bone contact (28.08%) compared to the extramaxillary approach (21.92%) (P=0.011). The correlation between 3D BIC% and high bone stress was stronger in the intrasinus approach, likely due to increased contact area in cortical bone. The intrasinus approach led to lower bone stress and a more robust correlation between bone stress and 3D BIC%, particularly in cortical bone contact. Importantly, the coverage area of cortical bone surrounding the zygomatic implant significantly influenced biomechanical performance of the zygomatic implants.

Individual approach to the treatment of patients with stage III–IV laryngeal and laryngopharyngeal cancer in the Altai territory

Laryngeal and laryngopharyngeal cancer is the most common malignancy within the head and neck. Although there are many treatments for laryngeal and laryngopharyngeal cancer, the treatment still faces great challenging.The aim of the study was to evaluate the effectiveness of personalized treatment and one-year recurrence-free survival in patients with stage III–IV laryngeal and laryngopharyngeal, including postoperative complications (VTE, bleeding) within a year.Material and Methods. From July 2022 to October 2023, 100 patients with stage III–IV laryngeal and laryngopharyngeal cancer were treated in the Department of Head and Neck Tumors at the Altai Regional Oncology Center (AROC), Barnaul. There were 95 men (95 %) and 5 women (5 %). Patients were divided into two groups. Group I patients (n=50) with locally advanced laryngeal cancer underwent laryngectomy followed by radiation therapy with a total dose of 54 Gy delivered to the bed of the removed tumor and lymph node drainage region. Group II patients (n=50) received 3 courses of chemotherapy followed by radiation therapy at a dose of 70–74 Gy.Results. In group I patients, clinically insignifcant bleeding from the upper third of the trachea (in the area of contact with the tracheostomy tube) was observed in 3 patients (6.0 %) 3–4 days after surgery. No VTE during hospital stay and within 6–12 months after completion of treatment was observed. The 1-year cumulative survival rate in this group of patients was 90.0 %. In group II patients receiving chemotherapy, bleeding from a pharyngeal tumor was detected in 4 (8.0 %) patients. There were no signs of VTEO in this group. The 1-year cumulative survival rate of these patients was 70 %.Conclusion. Patients with laryngeal/laryngopharyngeal cancer require an individual approach not only in determining therapeutic strategies, but also in the prevention of VTE and hemorrhagic complications.

Design Rules for 3D Printing‐Assisted Pressure Sensor Manufacturing: Achieving Broad Pressure Range Linearity

AbstractRecent advancements in 3D printing technology have expanded its application to manufacturing pressure sensors. By harnessing the cost‐effectiveness, streamlined processes, and design flexibility of 3D printing, sensor fabrication can be customized to meet specific performance needs. Thus far, 3D printing in pressure sensor development has been primarily limited to creating molds for transferring patterns onto flexible substrates, restricting both material selection and sensor performance. To fully unlock the potential of 3D printing in advanced pressure sensor fabrication, it is crucial to establish effective design rules focused on enhancing the figure of merit performance. This study introduces a universal design strategy aimed at maintaining high sensitivity across a wide pressure range—a challenging feat, as sensitivity significantly decreases at higher pressures. Our approach centers on engineering the deformability of 3D‐printed structures, achieving a linear increase in contact area between sensor patterns and electrodes without reaching saturation. Sensors designed with high elongation and low stiffness exhibit consistent sensitivity of 162.5 kPa⁻¹ across a broad pressure range (0.05–300 kPa). Mechanistic investigations through finite element analysis confirm that engineered deformability is key to achieving this enhanced linear response, offering robust sensing capabilities for demanding applications such as deep‐sea and space exploration.

Geometrically modified bovine pericardium membrane promotes the expression of molecules targeted for a faster integration and vascularization process

IntroductionIn recent years, advancements in technology and the refinement of engineering techniques have facilitated the development of tissue engineering, placing particular emphasis on the use of 3D-biomaterials with several structural and chemical geometric features. In particular, increasing information on biomaterial geometric surfaces has allowed for a better understanding of tissue regenerative processes. In the present study a comparison between BioRipar®, bovine pericardium membrane, modified with micrometric roundish regular open pores (BioR-Ps) and BioRipar® without pores (BioR-NPs) has been investigated.MethodsThe expression of adhesion molecules such as: fibronectin, vimentin, focal adhesion kinase (FAK), integrin 1β, integrin α5, E-cadherin, and molecules involved in neovascularization processes such as: vascular endothelial growth factor (VEGF) and vascular endothelial growth factor receptor (VEGF-R) were evaluated in an in vitro model containing primary culture of human periodontal ligament stem cells (hPDLSCs) through multiparametric analysis.ResultsThe results indicated a markedly significant expression of all the abovementioned molecules in hPDLSCs cultured withBioR-Ps compared to hPDLSCs cultured with BioR-NPs. Scanning electron microscopy analysis indicated a marked interaction between the cells and the substrate, particularly evident in the proximity of open pores in the hPDLSCs cultured on the BioR-P surface compared to hPDLSCs cultured on the BioR-NP surface. Thus, the presence of micrometric open pores on the scaffold stimulates the proliferation potential of cells apart from their adhesion ability on the patch, particularly near the poresDiscussionExpression of angiogenic molecules strengthened the performance of the modified BioR-Ps. During synthesis, 3D-biomaterial micrometric open-pores enable better bonding between cells and materials, increasing contact area and promoting cellular molecular signals in biomaterial-guided tissue engineering.

Quantitative Comparison of Age-Related Development of Oral Functions During Growing Age.

This cross-sectional study aimed to investigate the age-related development of five major oral functions-tongue pressure, lip pressure, masticatory efficiency, bite force, and occlusal contact area-in subjects aged 5-20 years. Ninety-two subjects were divided into four age groups: 5-8, 9-12, 13-16, and 17-20 years. Oral functions were evaluated using standardized methods, including Chew Check Gum for assessing masticatory efficiency, Dental Prescale II for measuring occlusal force and contact area, JMS tongue pressure measuring device for evaluating tongue pressure, and Ripple-Kun for measuring lip pressure. Occlusal contact area, maximum bite force, tongue pressure, and masticatory efficiency gradually increased with age, whereas lip pressure remained stable. The occlusal contact area temporarily decreased between 5 and 12 years of age, likely due to the replacement of erupting lateral teeth. Some differences were observed between males and females; however, overall trends in oral function parameters were similar. Spearman's rank correlation analyses revealed significant positive correlations between age and occlusal contact area, bite force, tongue pressure, and masticatory efficiency. Oral function parameters exhibited different age-related development patterns. Occlusal contact area, maximum bite force, tongue pressure, and masticatory efficiency gradually increased with age. Interestingly, the occlusal contact area tended to reduce temporarily between 5 and 12 years of age due to the replacement of erupting lateral teeth. Conversely, lip pressure was almost stable during this period. Our findings provide valuable insights into the developmental patterns of oral functions during the growing years.

Simulation analysis and experimental research of friction performance between wood and cemented carbide surface with different micro-textures

ABSTRACT Reasonable micro-pit texture has been proved to be able to improve the friction characteristics between wood and cemented carbide. In this paper, the finite element simulation analysis was used to simulate the friction surface stress, the simulation model was determined, and the simulation results were combined with the friction characteristics test to study the influence of different texture types on the friction coefficient of the wood surface. The results show that the friction coefficient and the stress magnitude of friction between cemented carbide and wood surface have a good linear correlation (R 2 = 0.9414), the finite element simulation can provide a reference for the study of friction behavior in the wood cutting process. The friction coefficient can be influenced by texture parameters such as texture type, the friction length, the width of micro-texture and the angle of micro-texture. Under the condition of the same texture area occupancy, the surface friction coefficient of the micro-pit texture is the smallest; the surface friction coefficient of the micro-groove texture is the largest, and the micro-grid texture has the smaller friction coefficient with the decrease of the texture angle. This is related to the actual contact area between the texture area of the friction area and the wood surface and the main braking force generated during contact.

Superhydrophobicity With Self-Adaptive Water Pressure Resistance and Adhesion of Pistia Stratiotes Leaf.

Superhydrophobic surfaces are promising for optimizing amphibious aircraft by minimizing water drag and adhesion. Achieving this involves ensuring these surfaces can resist high liquid pressure caused by deep water and fluid flow. Maximizing the solid-liquid contact area is a common strategy to improve liquid pressure resistance. However, this approach inevitably increases solid-liquid adhesion, making it challenging to guarantee a trade-off between the two wetting characteristics. Here, it is found that the Pistia stratiotes leaf exhibits superhydrophobicity with high water pressure resistance and low adhesion, attributed to its self-adaptive deformable microstructure with unique re-entrant features. Under pressure, these microstructures deform to increase the solid-liquid contact area, thereby enhancing water pressure resistance. The re-entrant features elevate the deformation threshold, enabling higher modulus microstructures to achieve adaptive response. This facilitates the recovery of deformed microstructures, restoring the air layer and maintaining low adhesion. Following these concepts, Pistia stratiotes leaf-inspired surfaces are fabricated, achieving an 183% improvement in water impact resistance and an ≈80% reduction in adhesion after overpressure compared to conventional superhydrophobic surfaces. The design principles inspired by Pistia stratiotes promise significant advancements in amphibious aircraft and other trans-media vehicles.

Patellofemoral Joint Contact Area Quantified In Vivo During Daily Activities.

In vivo measurements of patellofemoral joint contact area are scarce. Patellofemoral contact area has been measured in living people under static conditions with the knee held at fixed angles between 0 and 60° of flexion. No previous study to our knowledge has measured patellofemoral contact area in vivo during dynamic activity. The aim of this study was to measure and compare patellofemoral joint contact area in healthy people across a range of daily activities. Mobile biplane X-ray imaging was used to measure 3D tibiofemoral and patellofemoral kinematics in level walking, downhill walking, stair ascent, stair descent, and open-chain (non-weightbearing) knee flexion and knee extension. The kinematic data were combined with magnetic resonance imaging to determine patellofemoral joint contact area at each time point during each activity. The knee flexion angle explained, respectively, 83%, 80%, and 72% of the variability in the total, lateral, and medial patellofemoral contact areas measured across all participants and all activities. Total, lateral, and medial patellofemoral contact areas increased from 0 to 60° of knee flexion and then decreased as the flexion angle increased further, up to ~ 120°. Patellofemoral contact area was less sensitive to the type of activity and hence joint load. The lateral patellofemoral contact area was larger than the medial patellofemoral contact area throughout the range of knee flexion in all activities (p < 0.001). Knowledge of patellofemoral contact area during daily activities like walking improves our understanding of patellofemoral joint biomechanics and will assist in validating computational models of the patellofemoral joint.

The Degradation of Furfural from Petroleum Refinery Wastewater Employing a Packed Bubble Column Reactor Using O3 and a CuO Nanocatalyst

Furfural is one of the main pollutant materials in petroleum refinery wastewater. This work used an ozonized bubble column reactor to remove furfural from wastewater. The reactor applied two shapes of packing materials and two dosages of CuO nanocatalyst (0.05 and 0.1 ppm) to enhance the degradation process. The results indicated that adding 0.1 ppm of nanocatalyst provided an efficient rate of furfural degradation compared to that of 0.05 ppm. Also, the packing materials enhanced the furfural degradation significantly. As a result, the contact area between the gas and liquid phases increased, and a high furfural removal efficiency was achieved. It was found that the CuO nanocatalyst generated more (OH•) radicals. At a treatment time of 120 min and an ozone flow of 40 L/h, the furfural degradation recorded values of 80.66 and 78.6% at 10 and 20 ppm of initial concentration, respectively. At 60 ppm, the degradation efficiency did not exceed 74.16%. Furthermore, the kinetic study indicated that the first-order mechanism is more favorable than the second-order mechanism, representing the furfural degradation with a correlation factor of 0.9837. Finally, the furfural reaction can be achieved successfully in a shorter time and at low cost.

Relationship between tooth macrowear and jaw morphofunctional traits in representative hypercarnivores.

The mammalian adult dentition is a non-renewable resource. Tooth attrition and disease must be accommodated by individuals using behavioral, physiological, and/or musculoskeletal shifts to minimize impact on masticatory performance. From a biomechanical perspective, the musculoskeletal system becomes less efficient at producing bite force for a given amount of muscle input force over an individual's life, because tooth-food contact area increases as cusps wear. In this study we ask the question: does mandibular biomechanical performance show evidence of compensation with increasing tooth wear? We use representative taxa of three carnivoran ecomorphologies (meat specialist, scavenger, bone cracker) as a study system to compare morphofunctional data on tooth macrowear, jaw depth, bite mechanical efficiency, and jaw stress during biting. No significant shifts in adult mandibular corpus dimensions occurs in the sampled taxa as canine and carnassial teeth wear. In bone cracking spotted hyenas carnassial biting mechanical efficiency increases significantly with increasing tooth wear, with no significant change in mandibular stress. Analyses of the fossil carnivore Hyaenodon suggests an increase in canine biting efficiency with increased tooth wear, but this may reflect interspecific variation or phylogenetic contingency rather than a life history shift. Overall, these findings indicate that scavenging hyaenids and felid meat specialists do not exhibit morphofunctional compensation for the decreased mechanical capability of worn and dull teeth. Behavioral modifications, rather than musculoskeletal adjustments, may instead play a major role in maintaining food acquisition and processing capabilities for individuals surviving into advanced ontogenetic age and tooth wear. These observations highlight the mammalian masticatory system as having a dynamic performance profile through its useful lifespan, and encourage a more nuanced understanding of past and present carnivore guilds by considering wear-dependent performance changes as a possible source of selection.