Aqueous Solution Of Citric Acid Research Articles

Tribocorrosion Evaluation of AISI 431 Coated With Tungsten Oxynitride

Abstract Tribocorrosion is a phenomenon present in a wide variety of processes; hence, understanding the tribocorrosion behavior of different systems is essential to being able to design robust and reliable systems. This has led us to investigate the tribocorrosion behavior of AISI 431 steel, a stainless steel commonly used for manufacturing mechanical pieces. The response to tribocorrosion was evaluated for the AISI 431 steel in contact with an aqueous solution of citric acid, a solution commonly used in the food industry. The tests were carried out using samples of steel uncoated and coated with tungsten oxynitride in a pin-on-disc configuration using a tailored tribocorrosion cell. The uncoated AISI 431 presented good wear and corrosion resistance but presented tribocorrosion degradation, where the growth of the passivation film and the mechanical removal of such film were the driving factors for the tribocorrosion process. Furthermore, when the steel was coated with the tungsten oxynitride film, we found that the surface presented a better resistance to wear, corrosion, and tribocorrosion. Such findings open a great opportunity for the use of these types of coatings to protect systems against tribocorrosion.

Antimicrobial Activity of Citrate-Coated Cerium Oxide Nanoparticles.

The purpose of this study was to investigate the antimicrobial activity of citrate-stabilized sols of cerium oxide nanoparticles at different concentrations via different microbiological methods and to compare the effect with the peroxidase activity of nanoceria for the subsequent development of a regeneration-stimulating medical and/or veterinary wound-healing product providing new types of antimicrobial action. The object of this study was cerium oxide nanoparticles synthesized from aqueous solutions of cerium (III) nitrate hexahydrate and citric acid (the size of the nanoparticles was 3-5 nm, and their aggregates were 60-130 nm). Nanoceria oxide sols with a wide range of concentrations (10-1-10-6 M) as well as powder (the dry substance) were used. Both bacterial and fungal strains (Bacillus subtilis, Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Proteus vulgaris, Candida albicans, Aspergillus brasielensis) were used for the microbiological studies. The antimicrobial activity of nanoceria was investigated across a wide range of concentrations using three methods sequentially; the antimicrobial activity was studied by examining diffusion into agar, the serial dilution method was used to detect the minimum inhibitory and bactericidal concentrations, and, finally, gas chromatography with mass-selective detection was performed to study the inhibition of E. coli's growth. To study the redox activity of different concentrations of nanocerium, we studied the intensity of chemiluminescence in the oxidation reaction of luminol in the presence of hydrogen peroxide. As a result of this study's use of the agar diffusion and serial dilution methods followed by sowing, no significant evidence of antimicrobial activity was found. At the same time, in the current study of antimicrobial activity against E. coli strains using gas chromatography with mass spectrometry, the ability of nanoceria to significantly inhibit the growth and reproduction of microorganisms after 24 h and, in particular, after 48 h of incubation at a wide range of concentrations, 10-2-10-5 M (48-95% reduction in the number of microbes with a significant dose-dependent effect) was determined as the optimum concentration. A reliable redox activity of nanoceria coated with citrate was established, increasing in proportion to the concentration, confirming the oxidative mechanism of the action of nanoceria. Thus, nanoceria have a dose-dependent bacteriostatic effect, which is most pronounced at concentrations of 10-2-10-3 M. Unlike the effects of classical antiseptics, the effect was manifested from 2 days and increased during the observation. To study the antimicrobial activity of nanomaterials, it is advisable not to use classical qualitative and semi-quantitative methods; rather, the employment of more accurate quantitative methods is advised, in particular, gas chromatography-mass spectrometry, during several days of incubation.

Anthocyanin-rich extract from purple tea: Chemical stability, cellular antioxidant activity, and protection of human plasma

This study aimed to obtain an anthocyanin extract from the purple leaves of Camellia sinensis cv. Zijuan using a sustainable, non-toxic, and low-cost solid-liquid extraction, employing an aqueous citric acid solution (0.2 mol/L) as the extracting solvent, and to evaluate its chemical stability at different pH values, as well as its in vitro antioxidant properties in chemical and biological terms. The phenolic composition, in vitro antioxidant activity, and the stability of anthocyanins against pH, temperature, and light of the crude extract (CE) were evaluated, as well as the phenolic composition and bioactivity in the crude lyophilised extract (CLE). In the direct/reverse spectrophotometric titration, anthocyanins showed structural changes between pH 2 and 10, and reversibility of 80%. The antioxidant activity against the DPPH radical showed inhibition percentages of 73% (pH 4.5) to 39% (pH 10). Thermal stability was observed at 60 °C, and prolonged exposure of the extract to light caused photodegradation of the anthocyanins. Thirty-three phenolic compounds, including anthocyanins and catechins, were quantified in the CLE by UPLC-ESI-MS and HPLC, totalling 40.18 mg/g. CLE reduced cell viability (IC50 from 18.1 to 52.5 μg GAE/mL), exerted antiproliferative (GI50 from 0.0006 to 17.0 μg GAE/mL) and cytotoxic (LC50 from 33.2 to 89.9 μg GAE/mL) effects against A549 (human lung adenocarcinoma epithelial cells), HepG2 (hepatocellular carcinoma), HCT8 (ileocecal colorectal adenocarcinoma), and Eahy926 (somatic cell hybrid cells); and showed protection against oxidation of human plasma (635 ± 30 mg AAE/g). The results showed the diversity of compounds in the extracts and their potential for technological applications; however, temperature, pH, and light must be considered to avoid diminishing their bioactivity.

Complexation of lanthanide ions with citric acid in aqueous solutions

The stability constants of triply charged lanthanide ions complexes with citric acid of 1:2 stoichiometry weremeasured by potentiometric titration in a wide pH range, and the relationship between the constants and the lanthanide type was analyzed. A mathematical model for the equilibrium in studied solutions was proposed.

Impregnated fibrous ammonia chemisorbent based on citric acid. Prediction of protective characteristics

The influence of relative humidity (RH) of the gas-air environment on the ammonia chemisorption by impregnated fibrous chemisorbent (IFCS) is studied. IFCS was obtained by impregnating nonwoven needle-punched material from polyester fibers with an aqueous solution of citric acid (40 w%) with modifiers (glycerin, sodium chloride and ethanol) to uniformly distribute the chemisorbent on the surface of the fibers and increase adhesion to the composition of the impregnating solution. It is shown that for all values of relative humidity the curves of ammonia breakthrough through a fixed layer of IFCS спр(tпр) in the coordinates ln(c0/спр -1), tпр are reliably R2 > 0.95 approximated by straight lines and the Wheeler-Jonas theoretical model can be used for the quantitative description of the ammonia-IFCS system. By comparing the experimental and theoretical curves спр(tпр) in the coordinates ln(c0/спр -1), tпр the unknown model parameters were determined: the chemisorption rate constant and the sorption capacity of the IFCS unit mass and their dependence on the relative humidity of the gas-air environment (GAE). It has been established that the IFCS sorption capacity increases linearly with increasing, and the chemisorption rate constant of the ammonia-IFCS system does not depend on the GAE relative humidity and is equal to . The influence of the GAE relative humidity and the thickness of the IFCS layer on the ammonia breakthrough time is experimentally investigated and the adequacy of using the Wheeler-Jonas model for predicting the service life of IFCS for real use conditions is substantiated.

Complexation of Lanthanide Ions with Citric Acid in Aqueous Solutions

Complexation of Lanthanide Ions with Citric Acid in Aqueous Solutions

Influence of the Synthesis Scheme of Nanocrystalline Cerium Oxide and Its Concentration on the Biological Activity of Cells Providing Wound Regeneration.

In the ongoing search for practical uses of rare-earth metal nanoparticles, cerium dioxide nanoparticles (nanoceria) have received special attention. The purpose of this research was to study the biomedical effects of nanocrystalline forms of cerium oxide obtained by different synthesis schemes and to evaluate the effect of different concentrations of nanoceria (from 10-2 to 10-6 M) on cells involved in the regeneration of skin cell structures such as fibroblasts, mesenchymal stem cells, and keratinocytes. Two different methods of nanoceria preparation were investigated: (1) CeO-NPs-1 by precipitation from aqueous solutions of cerium (III) nitrate hexahydrate and citric acid and (2) CeO-NPs-2 by hydrolysis of ammonium hexanitratocerate (IV) under conditions of thermal autoclaving. According to the X-ray diffraction, transmission electron microscopy, and dynamic light scattering data, CeO2-1 consists of individual particles of cerium dioxide (3-5 nm) and their aggregates with diameters of 60-130 nm. CeO2-2 comprises small aggregates of 8-20 nm in diameter, which consist of particles of 2-3 nm in size. Cell cultures of human fibroblasts, human mesenchymal stem cells, and human keratinocytes were cocultured with different concentrations of nanoceria sols (10-2, 10-3, 10-4, 10-5, and 10-6 mol/L). The metabolic activity of all cell types was investigated by MTT test after 48 and 72 h, whereas proliferative activity and cytotoxicity were determined by quantitative cell culture counting and live/dead test. A dependence of biological effects on the method of nanoceria preparation and concentration was revealed. Data were obtained with respect to the optimal concentration of sol to achieve the highest metabolic effect in the used cell cultures. Hypotheses about the mechanisms of the obtained effects and the structure of a fundamentally new medical device for accelerated healing of skin wounds were formulated. The method of nanoceria synthesis and concentration fundamentally and significantly change the biological activity of cell cultures of different types-from suppression to pronounced stimulation. The best biological activity of cell cultures was determined through cocultivation with sols of citrate nanoceria (CeO-NPs-1) at a concentration of 10-3-10-4 M.

Exploring pKaof Peroxycitric Acid Coexisting with Citric Acid in Aqueous Solution with Voltmmetric, Potentiometic and Chromatographic Approaches

Exploring pKaof Peroxycitric Acid Coexisting with Citric Acid in Aqueous Solution with Voltmmetric, Potentiometic and Chromatographic Approaches

Temperature dependent volumetric, viscometric and conductance studies of barium chloride in aqueous solution of citric acid: an insight into molecular interactions

Abstract Alkaline earth metal salts and citric acid both play a vital role in our daily life in terms of biological importance, so in this regard, in the present study, we calculated density, speed of sound, conductance and viscosity of barium chloride (BaCl2) in concentration range (0.01–0.12 mol kg−1) in a binary solution of 0.01 mol kg−1 citric acid in water (CA + H2O) at temperatures between 303.15 and 318.15 K with gap of 5 K. The various parameters like apparent molar volume ϕ v , limiting apparent molar volume ϕ v o , transfer volume Δ tr ϕ v o , and partial molar volume expansibilities Φ E o ${{\Phi }}_{E}^{o}$ were calculated using density data. Viscosity data has been applied to calculate relative viscosity and Jones Dole coefficient A and B. Other parameters like Molar conductance (Λ m ), Λ o m and Λ o m η o have also been calculated using conductance data. All these parameters show strong evidences of various molecular interactions in terms of ion–solvent and solute–solute interactions. The ion–solvent interactions were supported by isobaric thermal expansion coefficient α o . Structure maker/breaker behaviour is explained by Hepler’s constant ((d 2 ϕ v o /dT 2 ) p ), temperature coefficient of B ( d B / d T $dB/dT$ ) and Walden product’s temperature coefficient (d(Λ o m η o )/dT). Further these molecular interactions support structure breaking potential of present studied system.

Dyeing of curcumin and durable press finishing with citric acid on cotton fabric using one step process

Cotton is an affordable and durable option for clothing. However, cotton garments tend to wrinkle easily. Therefore, cotton fabrics were studied to improve their wrinkle resistance properties. In this work, curcumin was mixed in an aqueous solution of citric acid and its catalyst and applied to cotton fabric using pad-dry-cure process for both the dyeing and finishing properties. Aloe vera extract and chitosan were used to compare for the reaction of their functional groups with carboxyl groups of citric acid on cotton fabrics. The mixture of curcumin and citric acid solution showed anti-wrinkle properties on the treated cotton. There were no functional groups of curcumin detected on the FTIR spectrum of the fabric. Furthermore, acetyl group of chitosan and methyl in acetyl group of aloe vera extract were found on the spectra of the fabrics treated with each compound. It was also found that the treated fabric showed good UV protection properties and good antibacterial gram-positive properties. This fabric has physical potential to be used for healthcare, hygiene and medical textile products.

Effect of potassium dihydrogen citrate on the diffusion behaviour of citric acid

Ternary mutual diffusion coefficients (D11, D22, D12, and D21) in aqueous solutions of citric acid (H3Cit) (component 1) plus potassium dihydrogen citrate (KH2Cit) (component 2) at 298.15 K and concentrations up to 0.040 mol dm−3 were measured using a Taylor scattering method. The obtaining of the negative values for D12 and D21 cross coefficients, mainly in dilute solutions and for the first ones, indicates that there is a strongly coupled diffusion of these components. In fact, the concentration gradients of KH2Cit drive substantial counter current coupled flows of H3Cit citric acid, indicating that each mol of diffusing potassium dihydrogen citrate can counteract the transport of up to 0.74 mol of citric acid, approximately. A better interpretation of the electrostatic mechanism for the coupled diffusion of KH2Cit and H3Cit was achieved based on the values predicted by the Nernst-Planck equations, having been verified as a good agreement between them and experimental data.

Valorization of Waste Orange Peels: Aqueous Antioxidant Polyphenol Extraction as Affected by Organic Acid Addition

Waste orange peels (WOP) are a food processing residue rich in bioactive polyphenols. However, data on aqueous extraction processes for efficient polyphenol recovery are rather limited. The present study dealt with the optimization of WOP polyphenols, using a batch stirred-tank mode and water as solvent. After a preliminary single-factor examination, the implementation of response surface methodology revealed that optimum extraction time and temperature were 60 min and 55 °C, respectively. Under these conditions, the extraction afforded a total polyphenol yield of 26.13 ± 0.78 mg gallic acid equivalents per g dry mass. The use of aqueous solutions of citric, tartaric and lactic acid showed that total polyphenol yield may be significantly increased with 1% tartaric acid or equally with 2.5% citric acid. However, the effect on individual polyphenolic constituents was rather negligible, as determined by high-performance liquid chromatography. The discrepancies observed in the antioxidant properties of the extracts produced with water and acidified water were putatively attributed to some differences in the polyphenolic composition. The extraction methodology proposed is environmentally green and of low cost, and it could certainly be used as an effective means of recovering WOP polyphenols.

Fire-retardant properties of wood modified with sorbitol, citric acid and a phosphorous-based system

Abstract Scots pine sapwood (Pinus sylvestris L.) was modified with an aqueous solution of sorbitol and citric acid (SorCA) and a commercial phosphorus-based fire-retardant (FR). The aim of this study was to assess whether the fire behavior can be improved when the SorCA solution is supplemented by an FR and if this effect is resistant to leaching. The fire behavior of modified wood was investigated by a Bunsen burner ignition test, mass loss calorimetry (MLC) and thermogravimetric analysis (TGA). The results demonstrated a significantly improved fire-retardancy based on a decreased burning rate and a reduced mass loss in the Bunsen burner test. Also, the induced formation of a protective char barrier facilitated by the addition of a FR, reduced the heat release rate and delayed the ignition. The fire-retardant effect was still observed, to the less extent, after a cold-water (EN 84 2020) leaching of the specimens.

Synthesis of nanocrystalline magnesium oxide by thermolysis of magnesium citrate

Magnesium citrate, obtained by dissolving magnesium oxide in an aqueous solution of citric acid, turned out to be a decahydrate of the composition Mg3(C6H5O7)2·10H2O, which was established by the results of synchronous thermal analysis, X-ray diffraction and IR spectroscopy. It is shown that the thermal decomposition of this salt proceeds in three stages in the temperature ranges of 120–250, 250–370 and 370–550 °C to form nanocrystalline magnesium oxide with grain sizes from 7 to 23 nm.

Flexible polymeric biomaterials from epoxidized soybean oil, epoxidized oleic acid, and citric acid as both a hardener and acid catalyst

AbstractFlexible bio‐based polymeric materials were produced by combining epoxidized soybean oil (ESO), aqueous citric acid solutions, and varying amounts of epoxidized oleic acid (EOA), followed by heating at 95°C for 24 h. Starting materials were analyzed by way of proton nuclear magnetic resonance (H1 NMR), to confirm the conversion of double bonds in soybean oil or oleic acid to epoxides. Attenuated total reflectance Fourier‐transform infrared spectroscopy (ATR‐FTIR) was used to confirm the reaction of epoxide groups with citric acid and/or EOA. Tensile testing was done to determine the differences in Young's modulus between samples with varying amounts of EOA. Stiffness increased with decreasing EOA content. The stiffest sample (0% EOA) and most elastic sample (30% EOA) had a Young's modulus of 1.43 ± 0.19 MPa and 0.064 ± 0.004 MPa, respectively. Differential scanning calorimetry (DSC) showed that the glass transition temperature was below room temperature for all samples, and decreased with increasing EOA content.

Application of Design of Experiments to the Analysis of Fruit Juice Deacidification Using Electrodialysis with Monopolar Membranes.

Despite the beneficial health effects of fruit juices, the high content of organic acids and low pH of some of them limit their consumption. The aim of this work was to study the deacidification of fruit juices using electrodialysis (ED) with monopolar membranes. Aqueous solutions of citric acid were used in ED deacidification experiments following a factorial design with citric acid concentration and electric current varying in the ranges of 5–25 g/L and 0.5–1 A, respectively. The design runs were characterized by a constant Faraday efficiency of 0.37 ± 0.03, suggesting that the triple-charged citrate ion (Cit3−) carried the electric charge through the anionic membranes. During deacidification, the pH increased in agreement with the decreasing concentration of the acid. Deacidification of pineapple juice or pineapple juice enriched with 20 g/L of citric acid using ED led to similar values of the Faraday efficiency, confirming that Cit3− is the main ion migrating through the anionic membrane. However, the decrease in titratable acidity during ED treatment was accompanied by a decrease in pH. Such behavior, already reported, was explained by considering proton generation during the transformation of the single (H2Cit−) and double-charged (HCit2−) citrate ions into the triple-charged ion (Cit3−) when entering the anionic membrane.

Hydrodynamic Fingering Induced by Gel Film Formation in Miscible Fluid Systems: An Experimental and Mathematical Study

Hydrodynamic fingering induced by gel formation shares common features with growing biofilms, bacterial colonies, and the instability of a confined chemical garden. Fluid displacement with gel formation is also essential in various engineering applications, including CO2 leakage remediation from storage reservoirs and enhanced oil recovery. We conducted Hele-Shaw cell displacement experiments for a miscible fluid system using skim milk and aqueous citric acid solution. This study aimed to investigate the effects of gel film formation on the fingering instability of a miscible fluid system and develop a mathematical model of the sequential growth of gel film formation at the fingertip. We found that the gel film formation thickens with time, resulting in instability at the interface. A distinctive fingering pattern, resembling tentacles, appears where miscibility is suppressed, and the growth of the finger is localized at the fingertip. The finger width remains constant with increasing flow rate, whereas the number of fingers increases linearly before the fingers merge. The gap width significantly limits the finger width. Finally, a mathematical model of sequential film thickness growth for a bubble-like fingertip structure was developed. This model is based upon the interplay between the diffusion of citric acid through the existing gel film formation and elongation of the fingertip. The model provides an understanding of the fundamental mechanism of the growth of the bubble-like fingertip.

Antiacne Effects of PVA/ZnO Composite Nanofibers Crosslinked by Citric Acid for Facial Sheet Masks

The water-insoluble polyvinyl alcohol (PVA) nanofibers containing ZnO nanoparticles were prepared by an electrospinning technique for antiacne facial masks. Zinc oxide (ZnO) nanoparticles prepared by a sol-gel method were dispersed in aqueous PVA and citric acid solution for electrospinning. The electrospun nanofibers were treated at 160°C to induce the thermal crosslinking between PVA and citric acid. The crosslinked PVA with citric acid become water-insoluble, which can be used for facial masks. PVA/ZnO composite nanofibers were characterized by structural and morphological analysis techniques including Fourier transform infrared spectroscopy (FT-IR), field-emission scanning electron microscopy (FE-SEM), and transmission electron microscopy (TEM). Also, the swelling ratios according to the ZnO content (0, 1, 4, and 7 wt.% with respect to PVA) were measured. Antibacterial activity tests were also studied. The clear zone of Cutibacterium acnes of PVA/ZnO 7% nanofibers was 2.25 mm, indicating antiacne activities of nanofibers.

Systematic HPLC/DAD/MSn study on the extraction efficiency of polyphenols from black goji: Citric and ascorbic acid as alternative acid components in the extraction mixture

BACKGROUND: The beneficial effects of the fruit of Lycium rhutenicum (black goji) have been linked to their polyphenolic profile. OBJECTIVE: Systematic examination of the extraction efficiency of polyphenols from cultivated black goji from Macedonia was carried out using 25 different solvent mixtures containing methanol, acetone or water combined with different acids (hydrochloric, acetic, citric and ascorbic acid). METHODS: An HPLC/DAD/MSn method was used for identification and quantification of phenolic acids, flavonoids, anthocyanins and also spermines and spermidines. RESULTS: The extraction solvent composition was found to have a significant effect on the yield of total as well as specific polyphenols. Pure methanol was found to be more efficient solvent for extraction of total phenolic compounds than pure water or acetone. Ascorbic acid in methanol (2%, m/v) was found to be the most efficient extraction solvent for total phenolic compounds. Aqueous solutions of citric and ascorbic acid gave the highest yield of phenolic acids, spermidines and flavonoids. The anthocyanin content in these extracts was somewhat lower in comparison with the one obtained with methanol/water/ascorbic acid (70 : 28 : 2). The qualitative analysis of the fruits cultivated in Macedonia showed similar polyphenolic pattern and anthocyanin content to the native plant growing in China. CONCLUSIONS: Citric and ascorbic acid can be used as alternative acid components in the extraction mixture.

Ultrasound-assisted pressurized liquid extraction of anthocyanins from Aronia melanocarpa pomace

This work aimed to investigate the optimum conditions of pressure, temperature, ultrasound intensity, solvent concentration and solvent flowrate of ultrasound-assisted pressurized liquid extraction of anthocyanins from Aronia melanocarpa pomace. The novel setup operates with an aqueous solution of citric acid as extraction solvent. The optimization was performed in order to maximize the total anthocyanins content extracted from the pomace. The optimized conditions of 70 °C, 180 bar, a solvent concentration of 1.5 % wt. citric acid, in a 200 W ultrasound bath were obtained. These conditions resulted in 88.0 % wt. extraction of anthocyanins in 45 min. A kinetic study was performed to study the influence of the temperature on the total anthocyanin yield obtained at the optimal extraction conditions. Moreover, the component stability was assessed to prove that the system could successfully operate at 80 °C. Compared to classical batch extraction using the same solvent concentration and feedstock, the total anthocyanin content of the extract was increased by 19%.