Aqueous Ammonia Solution Research Articles

Synthesis of potential anticonvulsants based on chloral hydrate and carbamazepine: their spectral characteristics and in silico ADME profiling

This paper reports the synthesis of a new potential anticonvulsant, N-(2,2,2-trichloro-1-hydroxyethyl)-5H-dibenzo[b,f]azepine-5-carboxamide. Its synthesis is based on condensing the anticonvulsant drug carbamazepine with chloral hydrate used in medical practice. The reaction was carried out in a melt or by boiling in dry benzene with the removal of the resulting water from the reaction medium. The product was obtained with yields of 88 and 79%, respectively. Replacing the hydroxyl group in the resulting condensation product with an amino group led to the formation of N-(1-amino-2,2,2-trichloroethyl)-5H-dibenzo[b,f]azepine-5-carboxamide. This synthesis was carried out in two stages. Initially, the hydroxy derivative was chlorinated with thionyl chloride. Then, by treating the resulting chlorine derivative with an aqueous solution of ammonia (25%) in MTBE medium, the target product was obtained. The structure of the obtained compounds was proven by 1H NMR and IR spectroscopy data. The SwissADME online platform showed that the synthesized compounds should have high bioavailability as well as moderate solubility in water and be able to penetrate the blood-brain barrier.

Preparation and properties of polymer composites filled with modified highly dispersed polyethylene terephthalate

A new method of processing polyethylene terephthalate waste into a highly dispersed polymer filler by chemical treatment in an aqueous ammonia solution has been proposed. The possibility of obtaining highly dispersed polymer filler and polymer composite materials under elevated pressure and temperature by incorporating the filler into an epoxy oligomer has been demonstrated. The size and microphase structure of dispersed modified polyethylene terephthalate were determined using optical microscopy and speckle interferometry. Infrared spectroscopy established the presence of polyamide groups on the surface and preserved polyethylene terephthalate in the center of the particles. The use of 2-(tri-butoxymethyl)oxirane monoepoxide demonstrated that the resulting powder is an active filler and reacts with epoxy groups at elevated temperature, enhancing the strength of the composite after formation. Some operational characteristics of the polymer composites have been determined, and the feasibility of applying the proposed methods to address the disposal of PET containers, including plastic bottles, has been shown. The conditions for producing the fillers, along with the characteristics of the obtained fillers and the polymer composites based on them, have been established.

One-pot synthesis of non-canonical ribonucleosides and their precursors from aldehydes and ammonia under prebiotic Earth conditions

The formation of polymers that can hold gene information and work as catalysts is a crucial step for the origin of life. The discovery of catalytic RNA (i.e., ribozyme) supports the hypothesis that RNA might have served these functions at the early stage of life on the Earth. Given this, the spontaneous formation of RNA monomers (i.e., ribonucleotides) and their polymerization on Hadean Earth are essential steps for the origin of life. Previous experiments have investigated the chemical reactions that allow the formation of ribonucleotides and their components. These works have revealed the required molecules to form biological ribonucleotides (i.e., canonical ribonucleotides). Based on geochemical perspectives, abundantly available reactive molecules spontaneously react with each other to provide abundant products. Aldehydes and ammonia are reactive molecules assumed to have been present in considerable amounts on Hadean Earth. However, little is understood about whether or not nucleotides and their components were formed from these molecules under prebiotic conditions. We investigated the incubation products of alkaline aqueous solutions of aldehydes and ammonia. The product solution contained sugars (including ribose), various imidazole derivatives, and ribosyl imidazole (i.e., imidazole ribonucleoside). Ribosyl imidazole is formed via ribosyl amine, which reveals a new reaction pathway for prebiotic ribonucleoside synthesis. The imidazole ribonucleoside was then phosphorylated to imidazole ribonucleotide via a simple dry-down reaction with phosphate. Borate ion improved the reaction yields of these nucleosides and nucleotides. Because all the reactants were available on prebiotic Earth and the reactions progressed spontaneously, imidazole ribonucleotides could have accumulated in prebiotic environments. The experimental simplicity of the present reaction suggests that imidazoles were more abundant than canonical nucleobases on the prebiotic Earth. This further implies that prebiotic oligonucleotides contained imidazole bases in addition to the canonical nucleobases. The improvement of the reaction yields by borate indicates that borate-rich environments were conducive places for the formation and accumulation of non-canonical nucleosides and nucleotides. Such environments could have facilitated the formation of primordial ribonucleic acids on Hadean Earth.

In situ synthesis of nano-CeO2 and chitosan composite

Nanosized cerium oxide (CeO2) particles were prepared by co-precipitation method using chitosan as a template, cerium (III) nitrate and cerium (IV) sulfate as starting materials and aqueous ammonia solution as a precipitating agent. XRD data indicate that cerianite with face-centered cubic phase is formed in the reaction systems. The size of the coherent scattering regions is about 3 nm or less. FTIR spectroscopy data indicate the interaction of polymer molecules with the inorganic component. The shift of absorption bands related to N-H bonds for composites with Ce(III) and Ce(IV) compared to chitosan indicates the interaction of amino groups with CeO2 particles. The application of chitosan as a matrix for the synthesis of CeO2 nanoparticles showed that this approach is more economical and easier to produce nanomaterials for various applications.

Transformation of waste thermocol into activated carbon for electrochemical detection of ammonia in an aqueous solution

In this study, waste thermocol sheets are used to synthesize activated carbon (AC) for the electrochemical detection of ammonia in an aqueous solution. The AC is characterized for its morphology, structure, and chemical composition via standard characterization techniques. AC shows promise for detecting ammonia in aqueous solutions due to its high adsorption capacity from large surface area and porosity. The electrochemical approach used to detect ammonia (NH3) in electrolyte solutions uses an AC electrode and is based mostly on the electro-oxidative conversion of ammonia species at the electrode's interface. AC electrodes fabricated on flexible conductive fabric (CF) are used for the electrochemical detection of ammonia at pH 6. The electrochemical sensing of ammonia in aqueous solutions involves its oxidation on the electrode's surface. Cyclic Voltammetry (CV) experiments were conducted over a pH range of 5 to 8, revealing optimal current responses at pH 6. Therefore, phosphate-buffered saline (PBS) at pH 6.0 was employed for all electrochemical analyses. Various concentrations of ammonia (10–100 ppm) were investigated within a voltage window of −0.3 V to 0.3 V, with current signals increasing proportionally with ammonia concentration. The limits of detection (LOD) and quantification (LOQ) were determined to be 28.55 ppm and 86.54 ppm, respectively. An incubation period of 3 min was observed for ammonia concentrations ranging from 0 to 40 ppm. Selectivity evaluations were conducted by assessing interference effects from ethanol (E), methanol (M), toluene (T), and uric acid (UA), revealing ammonia's distinctive peak, indicative of superior selectivity. Notably, the electrode exhibited remarkable stability, retaining approximately 95 % of the original signal over a 5-week duration. The reproducibility of the fabricated electrodes shows significant results. The repeatability was performed at room temperature in a buffer solution of pH 6 and at a 40-ppm concentration of ammonia and has shown almost similar results. Therefore, the fabricated AC sensing electrode has shown prominent stability, reproducibility, and repeatability. These sensing electrodes can be very beneficial for sensing applications.

The structure of water-ammonia mixtures from classical and abinitio molecular dynamics.

The structure of aqueous ammonia solutions is investigated through classical molecular dynamics (MD) and abinitio molecular dynamics (AIMD) simulations. We have preliminarily compared three well-known classical force fields for liquid water (SPC, SPC/E, and TIP4P) in order to identify the most accurate one in reproducing AIMD results obtained at the Generalized Gradient Approximation (GGA) and meta-GGA levels of theory. Liquid ammonia has been simulated by implementing an optimized force field recently developed by Chettiyankandy et al. [Fluid Phase Equilib. 511, 112507 (2020)]. Analysis of the radial distribution functions for different ammonia concentrations reveals that the three water force fields provide comparable estimates of the mixture structure, with the SPC/E performing slightly better. Although a fairly good agreement between MD and AIMD is observed for conditions close to the equimolarity, at lower ammonia concentrations, important discrepancies arise, with classical force fields underestimating the number and strength of H-bonds between water molecules and between water and ammonia moieties. Here, we prove that these drawbacks are rooted in a poor sampling of the configurational space spanned by the hydrogen atoms lying in the H-bonds of H2O⋯H2O and, more critically, H2O⋯NH3 neighbors due to the lack of polarization and charge transfer terms. This way, non-polarizable classical force fields underestimate the proton affinity of the nitrogen atom of ammonia in aqueous solutions, which plays a key role under realistic dilute ammonia conditions. Our results witness the need for developing more suited polarizable models that are able to take into account these effects properly.

Utilizing full-spectrum sunlight for ammonia decomposition to hydrogen over GaN nanowires-supported Ru nanoparticles on silicon

Photo-thermal-coupling ammonia decomposition presents a promising strategy for utilizing the full-spectrum to address the H2 storage and transportation issues. Herein, we exhibit a photo-thermal-catalytic architecture by assembling gallium nitride nanowires-supported ruthenium nanoparticles on a silicon for extracting hydrogen from ammonia aqueous solution in a batch reactor with only sunlight input. The photoexcited charge carriers make a predomination contribution on H2 activity with the assistance of the photothermal effect. Upon concentrated light illumination, the architecture significantly reduces the activation energy barrier from 1.08 to 0.22 eV. As a result, a high turnover number of 3,400,750 is reported during 400 h of continuous light illumination, and the H2 activity per hour is nearly 1000 times higher than that under the pure thermo-catalytic conditions. The reaction mechanism is extensively studied by coordinating experiments, spectroscopic characterizations, and density functional theory calculation. Outdoor tests validate the viability of such a multifunctional architecture for ammonia decomposition toward H2 under natural sunlight.

Solution-processed NiS thin films: structural, morphological, compositional and optical analysis

Abstract The present work elucidates a study on the synthesis and characterization of nanostructured NiS thin films, an optical absorber material. NiS films have been deposited on glass substrates using a simple and cost-effective chemical solution route. The deposition process has been accomplished using an aqueous solution of nickel chloride, thiourea, ammonia and Triton. As-deposited and thermally annealed films have been characterized using X-ray diffractometry, Fourier transform infrared spectrometry, scanning electron microscopy, atomic force microscopy, energy dispersive X-ray spectroscopy, and UV–visible spectrometry. It has been observed that the deposited films are nanocrystalline in nature and belong to the rhombohedral structure of the millerite phase. The diffraction peaks become more sharp, discrete and intense whereas the crystallite size increases from 9.89 to 11.78 nm with annealing treatment. Some variations in the infrared peaks have been observed with annealing. The characteristic peak for Ni–S vibration has been observed at ∼604 cm−1. The surface of the films is smooth, uniform, and free from cracks and pinholes. The optical absorbance analysis has confirmed that NiS films possess a direct optical band gap whose values vary from 1.50 to 1.45 eV with annealing.

Recovery of Zinc and Rhenium for the Production of Zinc Perrhenates

This study outlines findings from an investigation into the development of a hydrometallurgical process for manufacturing various forms of zinc perrhenate, entirely from waste from recycling and from the Zn–Pb industry. Scraps of Re-bearing Ni-based superalloys and acidic waste, circulating zinc solutions generated during the production of Zn by the electrolytic method and which contain >45 g/dm3 of Zn, Na, Mn, and Mg, were used in the research. In the publication, the conditions for the production of three types of zinc perrhenate, i.e., Zn(ReO4)2·4H2O, Zn(ReO4)2, and Zn(ReO4)2·2H2O, are presented. As a result of the analysis of the obtained results, it was concluded that to obtain the above-mentioned forms of zinc perrhenate, zinc carbonate can be used, precipitated from acidic, waste, and multi-component solutions after their prior neutralization to pH 4.0 and partial purification from Mn, Mg, and Na using metallurgical zinc oxide. Zinc carbonate should be precipitated using Na2CO3 at pH 6.3 and subsequently purified from other impurities, i.e., Mg, Na, and Mn, using aqueous ammonia solutions. As a result, zinc carbonate was obtained, which was used in a reaction with an aqueous solution of HReO4 to produce zinc perrhenate. The precipitated forms of Zn(ReO4)2 were obtained by appropriately drying the crude and hydrated Zn(ReO4)2 to obtain its tetrahydrate, dihydrate, and anhydrous forms, respectively, using drying temperatures of 55, 135, and 185 °C. The developed technology has been submitted for a patent and is an example of a technology founded on the principles of sustainable development, with a particular emphasis on the minimalization of loss of rhenium and zinc at all stages of its realization.

Directly Printable Flexible Optoelectronics through Surface Atomic Modification of Liquid Metals at Room Temperature.

Flexible optoelectronics have fully demonstrated their transformative roles in various fields, but their fabrication and application have been limited by complex processes. Liquid metals (LMs) are promising to be ideal raw materials for making flexible optoelectronics due to their extraordinary fluidity and printability. Herein, we propose a painting-modifying strategy based on solution processability for directly printing out fluorescent flexible optoelectronics from LMs via surface modification. The LMs of eGaIn, which were obtained by the mixing of gallium with indium metal spheres, were used as ink to paint high-finesse patterns on flexible substrates. Through introducing surface modification of LMs, the gallium atom on the surface of the LMs was directly transformed into the composite fluorescent functional layers of GaO(OH) and GaN after being modified with an ammonia aqueous solution. Owing to painting, this strategy is not limited by any curved surfaces, shapes, or facilities and has excellent adaptability. Particularly, the fluorescent layers were obtained through a spontaneous, instantaneous, and solution-processable process that is environmentally friendly, easy to administrate, recyclable, and adjustable. The present finding breaks through the limitations of LMs in making flexible optoelectronics and provides strategies for addressing severe challenges facing existing materials and flexible optoelectronics. This method is expected to be very useful for fabricating flexible lights, transformable displays, intelligent anticounterfeiting devices, skin-inspired optoelectronics, and chameleon-biomimetic soft robots in the coming time.

A Phosphorescent P/N/S Hybrid Ligand Stabilized Au2Cu Complex Selectively Senses Ammonia and Amines.

Reaction of a P/N/S hybrid ligand dpppyatc (N,N-bis((diphenylphosphaneyl)methyl)-N-(pyridin-2-yl)-amino-thiocarbamide) with Au(tht)Cl (tht=tetrahydrothiophene) and [Cu(MeCN)4]BF4 afforded cluster complex [Au2Cu(dpppyatc)2](BF4)2Cl (1). Upon excitation at 480 nm, 1 emitted orange phosphorescence at 646 nm, which was red-shifted to ~698 nm selectively in the presence of ammonia or amine vapor. This chromic photoluminescent response toward ammonia was sensitive and reversible. Complex1 could detect ammonia in aqueous solution down to concentrations of 2 ppm (w/w).

Impact of nanoscale Cu (I) precursors prepared by solution process on large-area CdTe solar cells

In recent years, the study of Cu (Ӏ) precursors in high-performance CdTe thin-film solar cell devices has received increasing attention. However, few studies have been reported on nanoscale Cu (I) precursors in large-area CdTe devices (≥1 cm2). Here, three different Cu (Ӏ) nano precursors have been rapidly prepared by solution method (CuCl ethanol solution, CuI acetonitrile solution, and CuSCN aqueous ammonia solution) and their effects on the performance of commercial large-area CdTe thin-film solar cells have been investigated. The results show that the distribution amount and uniformity of the nano precursor particles on the CdTe back surface have a large impact on the device performance. The CuCl nanoparticles are more uniformly distributed and the device performance is more excellent. CuI nanoparticles easily formed clusters at grain boundaries. Denser distribution of CuSCN nanoparticles. The thermal diffusion conditions (temperature, time and precursor concentration) have a significant effect on the device performance, but the most reasonable thermal diffusion conditions tend to be the same for all devices. This suggests that the thermal diffusion conditions are determined by the nature of the CdTe absorber layer itself and are not interfered by different nano precursors.

Direct Synthesis of C-Substituted [RC(O)CH2-CB11H11]− Carborate Anions

A new synthetic method for the synthesis of C-substituted [RC(O)CH2-CB11H11]− carborate anions has been developed. The reaction of [closo-B11H11]2− with terminal alkynes in the presence of a copper catalyst leads to insertion into the boron cluster, and C-substituted [RC(O)CH2-CB11H11]− carborate anions are formed. These reactions are strongly dependent on the reaction conditions, the solvents, and the alkynes used. The alkynes HCCCO2Et, HCCCO2Me, and HCCCONH2 lead to the formation of [NH2C(O)CH2-CB11H11]− as the final product in aqueous ammonia solution. In contrast, the reaction using the alkyne HCCCOMe yields [MeC(O)CH2-CB11H11]−. The products have been fully characterized by multinuclear NMR and IR spectroscopy as well as mass spectrometry. The crystal structures of K[NH2C(O)CH2-CB11H11] and [NEt3CH2Cl][NH2C(O)CH2-CB11H11] have been determined.

The Study of the Sense of Smell in Children: Development Prospects

Background. Despite the fact that the study of the olfactory system is still difficult, the detection of dysosmia is promising for the diagnosis of a number of diseases. As a screening method, tests for the identification of various odors can be used. However, similar tests are developed and used for adults. In pediatrics, the use of such methods causes difficulty due to the cognitive and linguistic functions of the child, which are in the stage of development. Aim — to study olfactory function in children using an identification test. Methods. A diagnostic prospective study of 30 healthy children with no complaints of decreased olfactory function, living in the middle zone of the Russian Federation, mainly in the Moscow Metropolitan area, aged 11 to 14 y.o. was held. All children underwent a study of olfactory function using the University of Pennsylvania Smell Identification Test (UPSIT). To control all children, olfactometry was performed using a patented method for assessing the thresholds of olfaction in children, based on the use of various concentrations of aqueous solutions of valerian tincture, ammonia and acetic acid. Results. In the study of sense of smell with the help of an UPSIT test, hyposmia was detected in 30% of children, which was not confirmed later with the help of a threshold test. At the same time, when presenting some odorants, most of the answers were incorrect. Conclusions. The use of olfactory tests developed for adults in children does not reflect the real state of the olfactory system. It is required to create kits for the study of the olfactory function specifically for the children’s category of patients.

Low platinum loading Co3O4 electrode for highly efficient oxidation of ammonia in aqueous solution

Chlorine-mediated electrochemical advanced oxidation (Cl-EAO) is an environmentally-friendly and promising ammonia removal technology to convert ammonia to N2 and effectively reduce water pollution. The efficiency of ammonia removal in Cl-EAO hinges critically on the performance of the electrode materials. Currently, precious metal oxides are commonly used as electrode materials in the industry. However, their high cost limits their widespread application in ammonia treatment. Herein, Pt-Co3O4 catalyst with lutra-low content of Pt (1.67 wt%) is successfully synthesized, which performs superior CER activity and higher removal efficiency of ammonia. The favorable catalytic performance could be attributed to the increase in oxygen vacancy content and the strong metal-supported strong interaction (SMSI) between Pt and Co3O4, which has been confirmed by XPS. Especially, the chlorine evolution efficiency of the Ti/Pt3 %-Co3O4 electrode was as high as 96 % in dilute chloride (<50 mM) solution at a current density of 10 mA/cm2. Therefore, the Ti/Pt3 %-Co3O4 electrode has a broad application prospect as a new and efficient material for ammonia wastewater treatment.

Ammonium ion removal from aqueous solutions in the presence of organic compounds, using biochar from banana leaves. Competitive isotherm models

BackgroundIndustrial, e.g. food industrial and domestic wastewaters contain huge amount of compounds causing eutrophication, and should be removed with high cost during wastewater treatment. However, these compounds could be utilized as fertilizers too. Biochar can remove a wide range of pollutants from water, such as ammonium, which can be found in relatively high concentration in dairy wastewaters. However, adsorption performance may be affected by the presence of other wastewater pollutants. Thus, this study aims to determine the efficiency of biochar as an adsorbent of ammonium in aqueous solutions in the presence of some selected organic compounds of typical dairy wastewaters such as bovine serum albumin (BSA), lactose, and acetic acid. Methods: The biochar was produced from banana leaves at 300 °C, modified with NaOH, and characterized by Scanning Electron Microscope – Energy Dispersive X-Ray Spectroscopy (SEM-EDX), Fourier-transform infrared spectra (FTIR) analysis, and specific surface area measurements. Batch experiments were carried out to investigate the ammonium adsorption capacity and the ion competitive adsorption mechanism. Significant Findings: Results show that the surface structure of the biochar derived from banana leaves is different from other biochars previously studied; although the specific surface area is not very considerable and despite having nitrogen within the elemental composition, the biochar studied is capable of adsorbing 2.60 mg NH4+/m2, the highest ammonium removal in 2 h occurs at pH 9 and 500 mg biochar dose. Langmuir model in the monolayer phase analysis fits better for all scenarios and the maximum NH4+ adsorption capacity was 0.97 mg/g without organic compounds. In the multilayer adsorption phase, the isotherm model that best fits the data obtained is the Harkins-Jura model without organic compounds. The presence of organic compounds in the aqueous solution significantly impacts the adsorption of ammonium by biochar since it improves the adsorption capacity (1.132 mg/g BSA, 0.975 mg/g lactose, and 1.874 mg/g acetic acid). The Aranovich-Donohue isotherm model fitted the data obtained during ion competitive adsorption experiments well.

Understanding the role of zinc ions on struvite nucleation and growth in the context of infection urinary stones.

Taking into account that in recent decades there has been an increase in the incidence of urinary stones, especially in highly developed countries, from a wide range of potentially harmful substances commonly available in such countries, we chose zinc for the research presented in this article, which is classified by some sources as a heavy metal. In this article, we present the results of research on the influence of Zn2+ ion on the nucleation and growth of struvite crystals-the main component of infection urinary stones. The tests were carried out in an artificial urine environment with and without the presence of Proteus mirabilis bacteria. In the latter case, the activity of bacterial urease was simulated chemically, by systematic addition of an aqueous ammonia solution. The obtained results indicate that Zn2+ ions compete with Mg2+ ions, which leads to the gradual replacement of Mg2+ ions in the struvite crystal lattice with Zn2+ ions to some extent. This means co-precipitation of Mg-struvite (MgNH4PO4·6H2O) and Znx-struvite (Mg1-xZnxNH4PO4·6H2O). Speciation analysis of chemical complexes showed that Znx-struvite precipitates at slightly lower pH values than Mg-struvite. This means that Zn2+ ions shift the nucleation point of crystalline solids towards a lower pH. Additionally, the conducted research shows that Zn2+ ions, in the range of tested concentrations, do not have a toxic effect on bacteria; on the contrary, it has a positive effect on cellular metabolism, enabling bacteria to develop better. It means that Zn2+ ions in artificial urine, in vitro, slightly increase the risk of developing infection urinary stones.

Dielectric Analysis of Amine Modified Nano-graphite: Effects of Thickness, Temperature and Frequency

Amine modified nano-graphite (NH2-NG) has been produced from nanographite (NG) powder via liquor ammonia (NH3) aqueous solution by microwave, ultrasonic methods. The surface modified NG have been characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FTIR) techniques which clearly demonstrate that synthesis of NH2-NG was successful. The crystalline characteristics of amine modified nanographite powder have been studied through XRD technique. The morphology structure of synthesized surface modified nanoparticles has been determined by SEM analysis. FTIR spectra confirmed the existence of amine groups on the surface of produced nano-graphite powder. NH2-NG pellet was prepared to analyse its dielectric properties as a function of thickness (1, 2, 3, 5 and 7 mm), frequency (range 10−2-105 Hz) and temperature (25, 50, 75 and 100 °C). As a function of frequency, the dielectric loss tangent and permittivity each exhibit a distinct relaxation peak that grows up to a thickness of 5 mm then decreasing. Because nanoparticles are capacitive, the capacitance values of NG and NH2-NG increase with thicknesses up to 5 mm and drop with frequency. The drop in dielectric permittivity of NG and NH2-NG pellets after 5 mm may be caused by an increase in resistivity. Positive temperature coefficient (PTC) of increased conductance is confirmed by the continuous increase in electrical conductivity of NG and NH2-NG with temperature. The degree of temperature has a significant impact on the dielectric loss tangent, dielectric permittivity, and electrical conductivity of NG, and NH2-NG.

Development of green and sustainable ammonia sensor from xanthohumol extract-immobilized polylactic acid nanofibers

Ammonia is a significant industrial gaseous agent that is colorless. However, long exposure to ammonia gas can cause organ damages or even death. This study describes the preparation of a solid-state vapochromic sensor for gaseous and aqueous ammonia using eco-friendly smart colorimetric polylactic acid nanofibers. Xanthohumol (XMOL) is a natural spectroscopic probe that can be found in the common hop (Humulus lupulus L.) plant. Nanoparticles of mordant/xanthohumol (M/XMOL) coordinated complex were synthesized by immobilizing the xanthohumol direct dyestuff into polylactic acid nanofibers in the presence of a mordant (potassium aluminum sulfate). Xanthohumol can be described as an appropriate sensor for gaseous and aqueous ammonia due to its tiny molecular size and high water-solubility. Both of CIE Lab color parameters and absorbance spectra were used to inspect the color shift of the xanthohumol-finished polylactic acid nanofibers from yellow to colorless upon exposure to ammonia. This could be attributed to the intramolecular charge transfer caused by molecular switching of xanthohumol. In a fraction of second, the polylactic acid nanofibrous fabric showed a colorimetric change with a detection limit of 10–450 mg/L. The absorption spectra of the xanthohumol probe exhibited hypsochromic shift with a wavelength change from 465 nm to 315 nm (isosbestic point of 370 nm) in response to an aqueous solution of ammonia. Transmission electron microscopic (TEM) images showed that M/XMOL particles were 13–27 nm in diameter, whereas scanning electron microscopic (TEM) images demonstrated that the polylactic acid nanofibers were 150–450 nm in diameter. We observed no significant differences in air-permeability and bending-length of the nanofibrous fabric after immobilization of M/XMOL into polylactic acid nanofibers. In addition, the colorfastness properties of the treated polylactic acid nanofibers were investigated.

Synthesis and structural characterization of CaMg0.5CoxNi0.5-xSi2O6 (0 ≤ x ≤ 0.5) solid solutions as a colouring substance

In this study, CaMg0.5CoxNi0.5-xSi2O6 (0.0 ≤ x ≤ 0.5) solid solutions with a diopside structure were prepared to reduce the cobalt and nickel amounts compared to M2SiO4 or MgMSiO4 (M = Co, Ni) compounds or CaCoxNi1-xSi2O6 solid solutions. Colloidal gels were obtained by adding an ammonia aqueous solution to the suspensions of precursors in aqua until pH = 10. Diopside structure began to develop at 800 °C and at 1000–1200 °C crystallinity and pink colour of materials (x ≠ 0) are optimal. In both CaMg0.5CoxNi0.5-xSi2O6 (0.0 ≤ x ≤ 0.5) and MgCoxNi1-xSiO4 (0.0 ≤ x ≤ 1.0) solid solutions with diopside and olivine structures the position of the third transition of octahedral Co(II), 4T1 → 4T1(P), is centred into the green absorption range and the observed colour is pink. A higher red amount in diopside than in olivine structure can be explained by the minor width of band of this third transition (minor distortion of octahedral M1 site) and shorter mean M1-O distances (M = Ni, Co).