Aqueous Pathway Research Articles

Segmental biomechanics of the normal and glaucomatous human aqueous outflow pathway

The conventional aqueous outflow pathway, encompassing the trabecular meshwork (TM), juxtacanalicular connective tissue (JCT), and inner wall endothelium of Schlemm's canal (SC), governs intraocular pressure (IOP) regulation. This study targets the biomechanics of low-flow (LF) and high-flow (HF) regions within the aqueous humor outflow pathway in normal and glaucomatous human donor eyes, using a combined experimental and computational approach. LF and HF TM/JCT/SC complex tissues from normal and glaucomatous eyes underwent uniaxial tensile testing. Dynamic motion of the TM/JCT/SC complex was recorded using customized green-light optical coherence tomography during SC pressurization in cannulated anterior segment wedges. A hyperviscoelastic model quantified TM/JCT/SC complex properties. A fluid-structure interaction model simulated tissue-aqueous humor interaction. FluoSpheres were introduced into the pathway via negative pressure in the SC, with their motion tracked using two-photon excitation microscopy. Tensile test results revealed that the elastic moduli of the LF and HF regions in glaucomatous eyes are 3.5- and 1.5-fold stiffer than the normal eyes, respectively. The FE results also showed significantly larger shear moduli in the TM, JCT, and SC of the glaucomatous eyes compared to the normal subjects. The LF regions in normal eyes demonstrated larger elastic moduli compared to the HF regions in glaucomatous eyes. The resultant strain in the outflow tissues and velocity of the aqueous humor in the FSI models were in good agreement with the digital volume correlation and 3D particle image velocimetry data, respectively. This study uncovers stiffer biomechanical responses in glaucomatous eyes, with LF regions stiffer than HF regions in both normal and glaucomatous eyes. Statement of significanceThis study delves into the biomechanics of the conventional aqueous outflow pathway, a crucial regulator of intraocular pressure and ocular health. By analyzing mechanical differences in low-flow and high-flow regions of normal and glaucomatous eyes, this research unveils the stiffer response in glaucomatous eyes. The distinction between regions' properties offers insights into aqueous humor outflow regulation, while the integration of experimental and computational methods enhances credibility. These findings have potential implications for disease management and present a vital step toward innovative ophthalmic interventions. This study advances our understanding of glaucoma's biomechanical basis and its broader impact on ocular health.

Implementing new computational methods for the study of JCT and SC inner wall basement membrane biomechanics and hydrodynamics

PurposeThe conventional aqueous outflow pathway, which includes the trabecular meshwork (TM), juxtacanalicular tissue (JCT), and the inner wall endothelium of Schlemm's canal (SC), regulates intraocular pressure (IOP) by controlling the aqueous humor outflow resistance. Despite its importance, our understanding of the biomechanics and hydrodynamics within this region remains limited. Fluid-structure interaction (FSI) offers a way to estimate the biomechanical properties of the JCT and SC under various loading and boundary conditions, providing valuable insights that are beyond the reach of current imaging techniques. MethodsIn this study, a normal human eye was fixed at a pressure of 7 mm Hg, and two radial wedges of the TM tissues, which included the SC inner wall basement membrane and JCT, were dissected, processed, and imaged using 3D serial block-face scanning electron microscopy (SBF-SEM). Four different sets of images were used to create 3D finite element (FE) models of the JCT and inner wall endothelial cells of SC with their basement membrane. The outer JCT portion was carefully removed as the outflow resistance is not in that region, leaving only the SCE inner wall and a few µm of the tissue, which does contain the resistance. An inverse iterative FE algorithm was then utilized to calculate the unloaded geometry of the JCT/SC complex at an aqueous humor pressure of 0 mm Hg. Then in the model, the intertrabecular spaces, pores, and giant vacuole contents were replaced by aqueous humor, and FSI was employed to pressurize the JCT/SC complex from 0 to 15 mm Hg. ResultsIn the JCT/SC complex, the shear stress of the aqueous humor is not evenly distributed. Areas proximal to the inner wall of SC experience larger stresses, reaching up to 10 Pa, while those closer to the JCT undergo lower stresses, approximately 4 Pa. Within this complex, giant vacuoles with or without I-pore behave differently. Those without I-pores experience a more significant strain, around 14%, compared to those with I-pores, where the strain is roughly 9%. ConclusionsThe distribution of aqueous humor wall shear stress is not uniform within the JCT/SC complex, which may contribute to our understanding of the underlying selective mechanisms in the pathway.

Biomechanics of the JCT and SC Inner Wall Endothelial Cells with Their Basement Membrane Using 3D Serial Block-Face Scanning Electron Microscopy.

More than ~70% of the aqueous humor exits the eye through the conventional aqueous outflow pathway that is comprised of the trabecular meshwork (TM), juxtacanalicular tissue (JCT), the inner wall endothelium of Schlemm's canal (SC). The flow resistance in the JCT and SC inner wall basement membrane is thought to play an important role in the regulation of the intraocular pressure (IOP) in the eye, but current imaging techniques do not provide enough information about the mechanics of these tissues or the aqueous humor in this area. A normal human eye was perfusion-fixed and a radial wedge of the TM tissue from a high-flow region was dissected. The tissues were then sliced and imaged using serial block-face scanning electron microscopy. Slices from these images were selected and segmented to create a 3D finite element model of the JCT and SC cells with an inner wall basement membrane. The aqueous humor was used to replace the intertrabecular spaces, pores, and giant vacuoles, and fluid-structure interaction was employed to couple the motion of the tissues with the aqueous humor. Higher tensile stresses (0.8-kPa) and strains (25%) were observed in the basement membrane beneath giant vacuoles with open pores. The volumetric average wall shear stress was higher in SC than in JCT/SC. As the aqueous humor approached the inner wall basement membrane of SC, the velocity of the flow decreased, resulting in the formation of small eddies immediately after the flow left the inner wall. Improved modeling of SC and JCT can enhance our understanding of outflow resistance and funneling. Serial block-face scanning electron microscopy with fluid-structure interaction can achieve this, and the observed micro-segmental flow patterns in ex vivo perfused human eyes suggest a hypothetical mechanism.

Unsaturated Fatty Acids Enhance Aqueous Atmospheric Oxidation Ability by Producing Oxygen‐Containing Radicals in Fog Droplets

AbstractThe surface of atmospheric aqueous aerosol is covered with an organic film. However, there have been limited studies about the photochemical process between the organic coating and aqueous samples such as fogwater, which contains light absorbing brown carbon (BrC). Here, the interactional aging process between unsaturated fatty acids and aqueous samples was performed by laboratory studies and field observations. On the one hand, glycine and alanine were selected as organic nitrogen‐containing compounds to form BrC with carbonyl compounds like glyoxal or methylglyoxal. Oleic acid was induced to form organic peroxy radicals through H‐abstraction by the excited triplet BrC or hydroxyl radical (OH). On the other hand, one type of aqueous formation pathway of Criegee intermediates (CIs) was proposed through the oxidation of oleic acid. CIs may be formed by OH addition to C=C bonds and scavenged by interfacial reactions. Results from ultra‐high resolution Fourier transform ion cyclotron resonance mass spectrometry show that the synergistic effect of oleic acid and OH may have a higher oxidative capacity than OH. Furthermore, our study demonstrates that oleic acid can improve the aqueous oxidation ability by producing oxygen‐containing radicals. These findings highlight that the formation of free radicals is greatly influenced by photochemical reactions, which further reveal the complexities of fog organic chemistry.

Developing an experimental-computational workflow to study the biomechanics of the human conventional aqueous outflow pathway.

The aqueous humor actively interacts with the trabecular meshwork (TM), juxtacanalicular tissue (JCT), and Schlemm's canal (SC) through a dynamic fluid-structure interaction (FSI) coupling. Despite the fact that intraocular pressure (IOP) undergoes significant fluctuations, our understanding of the hyperviscoelastic biomechanical properties of the aqueous outflow tissues is limited. In this study, a quadrant of the anterior segment from a normal human donor eye was dynamically pressurized in the SC lumen, and imaged using a customized optical coherence tomography (OCT). The TM/JCT/SC complex finite element (FE) with embedded collagen fibrils was reconstructed based on the segmented boundary nodes in the OCT images. The hyperviscoelastic mechanical properties of the outflow tissues' extracellular matrix with embedded viscoelastic collagen fibrils were calculated using an inverse FE-optimization method. Thereafter, the 3D microstructural FE model of the TM, with adjacent JCT and SC inner wall, from the same donor eye was constructed using optical coherence microscopy and subjected to a flow load-boundary from the SC lumen. The resultant deformation/strain in the outflow tissues was calculated using the FSI method, and compared to the digital volume correlation (DVC) data. TM showed larger shear modulus (0.92MPa) compared to the JCT (0.47MPa) and SC inner wall (0.85MPa). Shear modulus (viscoelastic) was larger in the SC inner wall (97.65MPa) compared to the TM (84.38MPa) and JCT (56.30MPa). The conventional aqueous outflow pathway is subjected to a rate-dependent IOP load-boundary with large fluctuations. This necessitates addressing the biomechanics of the outflow tissues using hyperviscoelastic material-model. STATEMENT OF SIGNIFICANCE: While the human conventional aqueous outflow pathway is subjected to a large-deformation and time-dependent IOP load-boundary, we are not aware of any studies that have calculated the hyperviscoelastic mechanical properties of the outflow tissues with embedded viscoelastic collagen fibrils. A quadrant of the anterior segment of a normal humor donor eye was dynamically pressurized from the SC lumen with relatively large fluctuations. The TM/JCT/SC complex were OCT imaged and the mechanical properties of the tissues with embedded collagen fibrils were calculated using the inverse FE-optimization algorithm. The resultant displacement/strain in the FSI outflow model was validated versus the DVC data. The proposed experimental-computational workflow may significantly contribute to understanding of the effects of different drugs on the biomechanics of the conventional aqueous outflow pathway.

Systemic steroid-induced ocular hypertension in a 7-year-old child with nephrotic syndrome and its management with netarsudil 0.02% eye drop

Prolonged use of corticosteroids may lead to increase in intraocular pressure (IOP), termed as steroid-induced ocular hypertension (SIOH). We report a case of a 7-year-old child with nephrotic syndrome and SIOH, uncontrolled with latanoprost 0.05%. Netarsudil 0.02%, a Rho kinase (ROCK) inhibitor, controlled IOP despite continuing steroid treatment and was tolerated well. Review of literature revealed ROCK inhibitors may be efficacious antiglaucoma medicines for SIOH owing to their direct action on corticosteroid-affected conventional aqueous outflow pathway. To the best of our knowledge, this is the first case report documenting the role of ROCK inhibitors in the management of pediatric SIOH.

Comparison of pathogenetically oriented methods aimed at activating the trabecular meshwork in the surgical treatment of cataract

In modern ophthalmic surgery, the "gold standard" recognized by most surgeons is ultrasound cataract phacoemulsification, which can’t be said about its antiglaucoma component. Some surgeons prefer to combine phacoemulsification with a filtering surgery, or follow the cyclodestructive approach, but taking into account that the main aqueous humor outflow pathway is through the trabecular meshwork, interventions on the Schlemm’s canal are the most relevant and pathogenetically valid. The article covers the main approaches to surgical interventions aimed at the trabecular meshwork in combination with phacoemulsification, and presents surgical techniques developed by the authors.

Aqueous habitats and carbon inputs shape the microscale geography and interaction ranges of soil bacteria

Earth’s diverse soil microbiomes host bacteria within dynamic and fragmented aqueous habitats that occupy complex pore spaces and restrict the spatial range of ecological interactions. Yet, the spatial distributions of bacterial cells in soil communities remain underexplored. Here, we propose a modelling framework representing submillimeter-scale distributions of soil bacteria based on physical constraints supported by individual-based model results and direct observations. The spatial distribution of bacterial cell clusters modulates various metabolic interactions and soil microbiome functioning. Dry soils with long diffusion times limit localized interactions of the sparse communities. Frequently wet soils enable long-range trophic interactions between dense cell clusters through connected aqueous pathways. Biomes with high carbon inputs promote large and dense cell clusters where anoxic microsites form even in aerated soils. Micro-geographic considerations of difficult-to-observe microbial processes can improve the interpretation of data from bulk soil samples.

Morphological and biomechanical analyses of the human healthy and glaucomatous aqueous outflow pathway: Imaging-to-modeling

Background and objectiveIntraocular pressure (IOP) is maintained via a dynamic balance between the production of aqueous humor and its drainage through the trabecular meshwork (TM), juxtacanalicular connective tissue (JCT), and Schlemm's canal (SC) endothelium of the conventional outflow pathway. Primary open angle glaucoma (POAG) is often associated with IOP elevation that occurs due to an abnormally high outflow resistance across the outflow pathway. Outflow tissues are viscoelastic and actively interact with aqueous humor dynamics through a two-way fluid-structure interaction coupling. While glaucoma affects the morphology and stiffness of the outflow tissues, their biomechanics and hydrodynamics in glaucoma eyes remain largely unknown. This research aims to develop an image-to-model method allowing the biomechanics and hydrodynamics of the conventional aqueous outflow pathway to be studied. MethodsWe used a combination of X-ray computed tomography and scanning electron microscopy to reconstruct high-fidelity, eye-specific, 3D microstructural finite element models of the healthy and glaucoma outflow tissues in cellularized and decellularized conditions. The viscoelastic TM/JCT/SC complex finite element models with embedded viscoelastic beam elements were subjected to a physiological IOP load boundary; the stresses/strains and the flow state were calculated using fluid-structure interaction and computational fluid dynamics. ResultsBased on the resultant hydrodynamics parameters across the outflow pathway, the primary site of outflow resistance in healthy eyes was in the JCT and immediate vicinity of the SC inner wall, while the majority of the outflow resistance in the glaucoma eyes occurred in the TM. The TM and JCT in the glaucoma eyes showed 1.32-fold and 1.13-fold larger beam thickness and smaller trabecular space size (2.24-fold and 1.50-fold) compared to the healthy eyes. ConclusionsCharacterizing the accurate morphology of the outflow tissues may significantly contribute to constructing more accurate, robust, and reliable models, that can eventually help to better understand the dynamic IOP regulation, hydrodynamics of the aqueous humor, and outflow resistance dynamic in the human eyes. This model demonstrates proof of concept for determining changes to outflow resistance in healthy and glaucomatous tissues and thus may be utilized in larger cohorts of donor tissues where disease specificity, race, age, and gender of the eye donors may be accounted for.

Nitration of Phenols by Reaction with Aqueous Nitrite: A Pathway for the Formation of Atmospheric Brown Carbon

Nitrophenols are a major component of light-absorbing atmospheric organic aerosols, commonly referred to as brown carbon (BrC). Most nitrophenol formation pathways involve reactions of phenolic compounds with OH, NO3, and NO2 in the gas phase. In this study, an aqueous nitrophenol production pathway is investigated that can proceed in the dark without apparent OH radical formation. Using high-performance liquid chromatography–mass spectrometry, we demonstrate that catechol reacts in acidic solutions with dissolved nitrite to form nitrocatechol. The rate of nitration increases significantly from pH 4.4 to pH 3.4 such that nitrocatechol is susceptible to second-generation reactions under the most acidic conditions producing chromophores that absorb in the visible region (peak at 425 nm). Increases in the N:C ratio of the reaction solution, as detected by aerosol mass spectrometry, and enhanced absorption from 300 to 500 nm of wood and peat smoke aqueous extracts exposed to nitrite suggest that this is a general nitration pathway. The atmospheric conditions under which this BrC formation process may occur are discussed.

Microbead-Induced Ocular Hypertension in a Rodent Model of Glaucoma.

Glaucoma is an irreversible blinding disease characterized by the loss of retinal ganglion cells. Development of therapeutics relies on suitable models and, given its complex nature, these are typically in vivo models. A widely used model, owing to its relative simplicity, is the microbead model. This model involves the injections of beads into the anterior chamber, which are suitably sized to block the aqueous outflow pathway, leading to an elevation in intraocular pressure and ultimately, retinal ganglion cell death. In this chapter, we describe in detail the materials and methods for modelling glaucoma using microbeads (both magnetic and nonmagnetic).

Analysis of Lipid Contents in Human Trabecular Meshwork Cells by Multiple Reaction Monitoring (MRM) Profiling Lipidomics.

Lipids are among the major constituents of cells and play many important cellular functions. Lipid levels in the trabecular meshwork (TM) aqueous humor outflow pathwayplay an important role in the maintenance of aqueous humor drainage and intraocular pressure (IOP) homeostasis. Therefore, it is important to characterize the changes in the lipid contents in the aqueous humor outflow pathway tissues to better understand their functional significance in the maintenance of IOP. The multiple reaction monitoring (MRM)-based profiling aids in the analysis of the metabolome as a collection of functional groups and is utilized as an exploratory metabolomics and lipidomics approach. The MRM-based profiling utilizes tandem mass spectrometry experiments carried out on a commercial triple quadrupole mass spectrometer with three aligned quadrupole mass filters (Q1, Q2, and Q3). This screening methodology can be utilized for targeted lipidomics screening. This chapter focuses on the methodology for isolation and culturing of the TM cells, lipid extraction, and the MRM-based lipidomics approach with data analysis.

Changes to Outflow Structures After Pilocarpine in Primary Open Angle Glaucoma Compared With Healthy Individuals Using Optical Coherence Tomography.

Lower response of aqueous outflow pathway structures after pilocarpine could be observed in primary open angle glaucoma (POAG) patients, which is likely to be helpful for understanding intraocular pressure (IOP) evaluation in glaucoma. To evaluate the morphologic changes in the trabecular meshwork (TM), Schlemm canal (SC), scleral spur (SS), and ciliary muscle after miosis in patients with POAG and healthy individuals. A total of 30 patients with POAG and 26 healthy controls were recruited. All participants underwent complete ophthalmologic examinations, including IOP and swept-source optical coherence tomography (OCT), before and 1 hour after the local administration of pilocarpine (2%). OCT measurements included TM thickness and width, SC diameter and area, SS length, ciliary muscle thickness, and ciliary muscle angle (CMA). Pilocarpine administration induced a decline in IOP (15.6±2.3-14.6±2.2mmHg), decrease in nasal SS length (196.31±47.75-171.52±33.93μm), decrease in TM thickness (90.18±16.43-83.02±13.74μm), and increase in SC diameter (134.84±32.28-162.08±48.67μm) and SC area (3851.37±1455.07-4801.39±1762.37μm 2 ) among healthy controls. In contrast, no significant changes in IOP and OCT measurements were found in patients with POAG. At baseline, CMA was independently correlated with IOP in normal eyes. After miosis, the change in TM thickness was independently correlated with changes in IOP in normal eyes; in eyes with POAG, changes in SS length and CMA were independently associated with changes in IOP. Topical pilocarpine-induced morphologic changes to outflow pathway structures in healthy individuals without significant changes in POAG. The lower response observed in patients with glaucoma may be relevant to understanding IOP changes.

Modeling the Endothelial Glycocalyx Layer in the Human Conventional Aqueous Outflow Pathway.

A layer of proteoglycans and glycoproteins known as glycocalyx covers the surface of the trabecular meshwork (TM), juxtacanalicular tissue (JCT), and Schlemm's canal (SC) inner wall of the conventional aqueous outflow pathway in the eye. This has been shown to play a role in the mechanotransduction of fluid shear stress and in the regulation of the outflow resistance. The outflow resistance in the conventional outflow pathway is the main determinant of the intraocular pressure (IOP) through an active, two-way, fluid-structure interaction coupling between the outflow tissues and aqueous humor. A 3D microstructural finite element (FE) model of a healthy human eye TM/JCT/SC complex with interspersed aqueous humor was constructed. A very thin charged double layer that represents the endothelial glycocalyx layer covered the surface of the elastic outflow tissues. The aqueous humor was modeled as electroosmotic flow that is charged when it is in contact with the outflow tissues. The electrical-fluid-structure interaction (EFSI) method was used to couple the charged double layer (glycocalyx), fluid (aqueous humor), and solid (outflow tissues). When the IOP was elevated to 15 mmHg, the maximum aqueous humor velocity in the EFSI model was decreased by 2.35 mm/s (9%) compared to the fluid-structure interaction (FSI) model. The charge or electricity in the living human conventional outflow pathway generated by the charged endothelial glycocalyx layer plays a minor biomechanical role in the resultant stresses and strains as well as the hydrodynamics of the aqueous humor.

In vivo identification of angle dysgenesis

AbstractAnterior segment Spectral domain–optical coherence tomography (SD‐OCT) is being increasingly used in glaucoma patients, primarily to investigate the anterior chamber angle and visualize the trabecular meshwork (TM) and Schlemm's canal (SC) in vivo. With the advent of angle surgery for glaucoma much interest has been generated in the aqueous outflow pathways. Our studies have shown that in vivo imaging of anterior chamber angle with ASOCT can been used to detect gross features of angle dysgenesis in primary congenital glaucoma (PCG), juvenile onset open angle glaucoma (JOAG) and adult onset primary open angle glaucoma (POAG), which has been described either as an absence of SC and/or the presence of abnormal tissue or a hyper‐reflective membrane within angle recess. This membrane is similar to what Barkan had described in PCG and was later described to be an angle cicatrization that portends a poorer success with goniotomy. Absence of development of SC was also shown by Hollander et al to be associated with a severe form of goniodysgenesis while its presence was seen in less severe goniodysgenesis on histopathological studies involving PCG. In fact, angle dysgenesis on ASOCT (ADoA), can be observed even in eyes with gonioscopically normal appearing angles. It is known that gonioscopy provides only a superficial representation of the histopathological anomalies affecting the angle. The presence of a thick compact tissue in the TM samples of Juvenile glaucoma patients has been observed, irrespective of whether they had an apparent goniodysgenesis or not. Hence, what appears to be morphologically normal angle on gonioscopy may harbour dysgenesis of the TM or even the SC. Primary congenital glaucoma, JOAG and adult onset POAG form a spectrum in terms of severity of angle dysgenesis. While most of the PCG eyes have features of ADoA, the same are present in 40% of JOAG eyes and in up to 35% of adult onset POAG. The size of the SC has also shown to be decreased in patients with adult‐onset open angle glaucoma based on in vivo OCT studies. We also present interesting observations of angle dysgenesis in fellow eyes of children with unilateral PCG.

The Effect of Intraocular Pressure Load Boundary on the Biomechanics of the Human Conventional Aqueous Outflow Pathway.

Aqueous humor outflow resistance in the trabecular meshwork (TM), juxtacanalicular connective tissue (JCT), and Schlemm's canal (SC) endothelium of the conventional outflow pathway actively contribute to intraocular pressure (IOP) regulation. Outflow resistance is actively affected by the dynamic outflow pressure gradient across the TM, JCT, and SC inner wall tissues. The resistance effect implies the presence of a fluid-structure interaction (FSI) coupling between the outflow tissues and the aqueous humor. However, the biomechanical interactions between viscoelastic outflow tissues and aqueous humor dynamics are largely unknown. A 3D microstructural finite element (FE) model of a healthy human eye TM/JCT/SC complex was constructed with elastic and viscoelastic material properties for the bulk extracellular matrix and embedded elastic cable elements. The FE models were subjected to both idealized and a physiologic IOP load boundary using the FSI method. The elastic material model for both the idealized and physiologic IOP load boundary at equal IOPs showed similar stresses and strains in the outflow tissues as well as pressure in the aqueous humor. However, outflow tissues with viscoelastic material properties were sensitive to the IOP load rate, resulting in different mechanical and hydrodynamic responses in the tissues and aqueous humor. Transient IOP fluctuations may cause a relatively large IOP difference of ~20 mmHg in a very short time frame of ~0.1 s, resulting in a rate stiffening in the outflow tissues. Rate stiffening reduces strains and causes a rate-dependent pressure gradient across the outflow tissues. Thus, the results suggest it is necessary to use a viscoelastic material model in outflow tissues that includes the important role of IOP load rate.

AZD6738 decreases intraocular pressure and inhibits fibrotic response in trabecular meshwork through CHK1/P53 pathway

In this study, we report that AZD6738 (Ceralasertib), a novel potent ataxia telangiectasia and Rad3-related (ATR) kinase inhibitor, can decrease intraocular pressure (IOP) and inhibits fibrotic response in the trabecular meshwork (TM). We established mice TGF-β2-induced high IOP model and revealed that AZD6738 could effectively decrease IOP in the mice model and reduce TGF-β2-induced hyperplasia, collagen production, fibrosis, and extracellular matrix (ECM) remodeling in the TM by downregulating checkpoint kinase 1 (CHK1) level. Further, we demonstrated that AZD6738 reduces cell viability and migration, and inhibit the expression of fibrosis-related factors including fibronectin (FN), α-smooth muscle actin (α-SMA), laminin subunit beta 1 (LAMB1), matrix metallopeptidase (MMP) family including MMP2 and MMP9, collagen Ⅰ (COL1), and collagen Ⅳ (COL4), reduce gap junctions, altered cytoskeleton and nitric oxide production in TGF-β1-induced human trabecular meshwork cells (HTMCs) through the CHK1/P53 pathway, which were affected aqueous humor (AH) production and outflow pathway. In addition, we preliminarily verified the safety of the AZD6738 in topical ophthalmic use. Hence, our results demonstrate that AZD6738 may become a potential therapeutic option for anti-glaucoma.

Viscoelastic Biomechanical Properties of the Conventional Aqueous Outflow Pathway Tissues in Healthy and Glaucoma Human Eyes.

Background: Although the tissues comprising the ocular conventional outflow pathway have shown strong viscoelastic mechanical response to aqueous humor pressure dynamics, the viscoelastic mechanical properties of the trabecular meshwork (TM), juxtacanalicular connective tissue (JCT), and Schlemm’s canal (SC) inner wall are largely unknown. Methods: A quadrant of the anterior segment from two human donor eyes at low- and high-flow (LF and HF) outflow regions was pressurized and imaged using optical coherence tomography (OCT). A finite element (FE) model of the TM, the adjacent JCT, and the SC inner wall was constructed and viscoelastic beam elements were distributed in the extracellular matrix (ECM) of the TM and JCT to represent anisotropic collagen. An inverse FE-optimization algorithm was used to calculate the viscoelastic properties of the ECM/beam elements such that the TM/JCT/SC model and OCT imaging data best matched over time. Results: The ECM of the glaucoma tissues showed significantly larger time-dependent shear moduli compared to the heathy tissues. Significantly larger shear moduli were also observed in the LF regions of both the healthy and glaucoma eyes compared to the HF regions. Conclusions: The outflow tissues in both glaucoma eyes and HF regions are stiffer and less able to respond to dynamic IOP.

PM2.5 bound species variation and source characterization in the post-lockdown period of the Covid-19 pandemic in Delhi

This work analyzes the PM2.5 bound highly time-resolved non-refractory and elemental compositions to observe the lag effects of the COVID-19 lockdown in the capital city of India. To the best of our knowledge, this is the first study that focuses on PM2.5 bound highly time-resolved chemical species and source apportionment to assess the contribution of various sources in the post lockdown period (June to September 2020). Here, a comparative scenario between lockdown and unlock periods along with previous years' work is presented. The following eight source profiles are identified from the source apportionment of elements such as power plant (35.6%), dust (25.7%), biomass burning (16.2%), vehicular emission (10%), secondary chloride (4%), waste incineration (3.6%), coal combustion (2.8%) and industrial emission (2.2%). The apportion sources of organic aerosol (OA) yielded two primary factors, primary organic aerosol (POA) and biomass burning organic aerosol (BBOA), and two secondary factors, oxygenated organic aerosols 1 and 2 (OOA-1 and OOA-2). The two oxygenated factors, OOA-1 and OOA-2 dominated the total OA mass concentration with 67.5% and 22% contribution, followed by POA and BBOA with 6.5% and 4%, respectively. The primary factors, POA and BBOA, also showed significant dependency on meteorological conditions during the post lockdown period. A significantly low contribution from the primary factors is seemingly the lagging effect of the lockdown imposed by the government in the earlier months. The meteorological conditions also significantly impacted OOA-1 concentration, which decreased by around 50% in August compared to June 2020. To understand the formation pathways of secondary nitrate and sulphate, NOR and SOR values were calculated and their variation during different RH periods was studied. It was found that photochemical oxidation was the primary pathway of SO2 to SO42− conversion while heterogeneous aqueous pathway was the primary mechanism for nitrate formation during the study period.

The physiological and pathophysiological roles of the autophagy lysosomal system in the conventional aqueous humor outflow pathway: More than cellular clean up.

During the last few years, the autophagy lysosomal system is emerging as a central cellular pathway with roles in survival, acting as a housekeeper and stress response mechanism. Studies by our and other labs suggest that autophagy might play an essential role in maintaining aqueous humor outflow homeostasis, and that malfunction of autophagy in outflow pathway cells might predispose to ocular hypertension and glaucoma pathogenesis. In this review, we will collect the current knowledge and discuss the molecular mechanisms by which autophagy does or might regulate normal outflow pathway tissue function, and its response to different types of stressors (oxidative stress and mechanical stress). We will also discuss novel roles of autophagy and lysosomal enzymes in modulation of TGFβ signaling and ECM remodeling, and the link between dysregulated autophagy and cellular senescence. We will examine what we have learnt, using pre-clinical animal models about how dysregulated autophagy can contribute to disease and apply that to the current status of autophagy in human glaucoma. Finally, we will consider and discuss the challenges and the potential of autophagy as a therapeutic target for the treatment of ocular hypertension and glaucoma.