Environmental Risk Assessment Approach Research Articles

Development of LC–MS/MS Method for the Simultaneous Detection of Emerging Contaminants in Aquatic Matrices

Emerging contaminants (ECs) are substances that have no defined environmental quality standards or regulations, and have the potential to pose major adverse impacts on the environment and human health. The detection of contaminants in the natural environment is the key step for establishing precise environmental risk assessment approach for ECs. However, ECs come from different origins with various physicochemical properties, making their detection a complicated process. Moreover, their presence in the aquatic environment at trace concentration range (ng/L-µg/L), requires an accurate detection at low concentration levels. This study aims to develop an efficient analytical method for simultaneous determination of 5 different ECs in aqueous solution based on solid phase extraction technique (SPE) followed by liquid chromatography-mass spectrometry (LC–MS/MS). High recovery rates (72% to 114%) were achieved for all targeted compounds. Ciprofloxacin (CIP), diuron (DIU), terbutryn (TER) and diclofenac (DIC) had a limit of detection (LOD) of 5 µg/L and a limit of quantification (LOQ) of 10 ng/L, while LOD and LOQ for EE2 were 25 µg/L and 50 ng/L, respectively. These results confirm that the optimized method can be applied for extraction and analysis of ECs from different classes in the aquatic environment.

Meta-metabolomic responses of river biofilms to cobalt exposure and use of dose-response model trends as an indicator of effects

The response of the meta-metabolome is rarely used to characterize the effects of contaminants on a whole community. Here, the meta-metabolomic fingerprints of biofilms were examined after 1, 3 and 7 days of exposure to five concentrations of cobalt (from background concentration to 1 × 10−5 M) in aquatic microcosms. The untargeted metabolomic data were processed using the DRomics tool to build dose-response models and to calculate benchmark-doses. This approach made it possible to use 100% of the chemical signal instead of being limited to the very few annotated metabolites (7%). These benchmark-doses were further aggregated into an empirical cumulative density function. A trend analysis of the untargeted meta-metabolomic feature dose-response curves after 7 days of exposure suggested the presence of a concentration range inducing defense responses between 1.7 × 10−9 and 2.7 × 10−6 M, and of a concentration range inducing damage responses from 2.7 × 10−6 M and above. This distinction was in good agreement with changes in the other biological parameters studied (biomass and chlorophyll content). This study demonstrated that the molecular defense and damage responses can be related to contaminant concentrations and represents a promising approach for environmental risk assessment of metals.

An innovative index to incorporate transcriptomic data into weight of evidence approaches for environmental risk assessment

The sharp decrease in the cost of RNA-sequencing and the rapid improvement in computational analysis of eco-toxicogenomic data have brought new insights into the adverse effects of chemicals on aquatic organisms. Yet, transcriptomics is generally applied qualitatively in environmental risk assessments, hampering more effective exploitation of this evidence through multidisciplinary studies. In view of this limitation, a methodology is here presented to quantitatively elaborate transcriptional data in support to environmental risk assessment. The proposed methodology makes use of results from the application of Gene Set Enrichment Analysis to recent studies investigating the response of Mytilus galloprovincialis and Ruditapes philippinarum exposed to contaminants of emerging concern. The degree of changes in gene sets and the relevance of physiological reactions are integrated in the calculation of a hazard index. The outcome is then classified according to five hazard classes (from absent to severe), providing an evaluation of whole-transcriptome effects of chemical exposure. The application to experimental and simulated datasets proved that the method can effectively discriminate different levels of altered transcriptomic responses when compared to expert judgement (Spearman correlation coefficient of 0.96). A further application to data collected in two independent studies of Salmo trutta and Xenopus tropicalis exposed to contaminants confirmed the potential extension of the methodology to other aquatic species. This methodology can serve as a proof of concept for the integration of “genomic tools” in environmental risk assessment based on multidisciplinary investigations. To this end, the proposed transcriptomic hazard index can now be incorporated into quantitative Weight of Evidence approaches and weighed, with results from other types of analysis, to elucidate the role of chemicals in adverse ecological effects.

Building a European Partnership for next generation, systems‐based Environmental Risk Assessment (PERA)

The European Partnership for next generation, systems-based Environmental Risk Assessment (PERA) is a strategic initiative launched by the European Food Safety Authority (EFSA). This initiative is in response to the recognition that the current ERA paradigm has “fallen out of step with scientific knowledge and progress” and the new policy and societal ambitions e.g. the EU Green Deal strategy to better safeguard the environment. As part of the initiative, EFSA commissioned the development of a roadmap to facilitate a transition to an integrated and cross-sectoral environmental risk assessment (ERA) approach. The PERA systems-based approach aims to connect relevant partners from various sectors across regulatory silos, promotes and facilitates the sharing of data and expertise, and improves efficiency and transparency of the risk assessment process. In this External Scientific Report, we present the PERA roadmap that comprises of a problem description (current state), a vision (future state) and a series of steps to move towards the vision (transition process). The PERA roadmap was developed after extensive desk research and multiple stakeholder interviews, that were used to identify partners, areas needing further development, challenges, blockers and collaboration opportunities. We designed a vision for next generation ERAs, initially focused on pesticides, based on the ideas of stakeholders and accounting for the identified strengths and weaknesses of the current ERA system. Workshops were held during which stakeholders were invited to comment on these draft concepts providing valuable feedback for further revision. The PERA vision is a visual framework for systems-based ERA, with a concentric circle model. Its core circle builds upon and strengthens current ERA processes by focusing on pesticide specific aspects useful for comparability and decreasing the assessment complexity of pesticides. The inner core circle is surrounded by a supportive circle of landscape scale ERA, that addresses ecosystems properties of generic relevance for all pesticides. These two ERA circles are in turn connected to surrounding circles representing the agricultural, ecological and production systems as well as the political, economic and social systems. To fully optimize the process these circles need to be interconnected with information feed-back loops. The vision and roadmap were designed to incorporate the strengths, knowledge and expertise of the current state into a new holistically framed systems-based ERA. Strategies for transition, as well as concrete projects to spark the transition process are proposed and include concrete and tangible steps in a holistic direction within the current regulatory framework.

Toward a Framework for Environmental Fate and Exposure Assessment of Polymers.

Development of risk-assessment methodologies for polymers is an emerging regulatory priority to prevent negative environmental impacts; however, the diversity and complexity of polymers require adaptation of existing environmental risk-assessment approaches. The present review discusses the challenges and opportunities for the fate and exposure assessment of polymers in the context of regulatory environmental risk assessment of chemicals. The review discusses the applicability and adequacy for polymers of existing fate parameters used for nonpolymeric compounds and proposes additional parameters that could inform the fate of polymers. The significance of these parameters in various stages of an exposure-assessment framework is highlighted, with classification of polymers as solid or dissolved being key for identification of those parameters most relevant to environmental fate. Considerations to address the key limitations and knowledge gaps are then identified and discussed, specifically the complexity of polymer identification, with the need for characterization of the most significant parameters for polymer grouping and prioritization; the complexity of polymer degradation in the environment, with the need to incorporate the fate and hazards of degradation products into risk assessment; the requirement for development and standardization of analytical methods for characterization of polymer fate properties and degradation products; and the need to develop exposure modeling approaches for polymers. Environ Toxicol Chem 2022;41:515-540. © 2021 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

A critical review of modelling approaches for environmental risk assessment due to pesticides

A critical review of modelling approaches for environmental risk assessment due to pesticides

A critical review of modelling approaches for environmental risk assessment due to pesticides

A critical review of modelling approaches for environmental risk assessment due to pesticides

Development of a bioavailability-based risk assessment framework for nickel in Southeast Asia and Melanesia.

ABSTRACTNickel laterite ore deposits are becoming increasingly important sources of Ni for the global marketplace and are found mainly in tropical and subtropical regions, including Indonesia, the Philippines, Papua New Guinea, Cuba, and New Caledonia. There are few legislatively derived standards or guidelines for the protection of aquatic life for Ni in many of these tropical regions, and bioavailability‐based environmental risk assessment (ERA) approaches for metals have mainly been developed and tested in temperate regions, such as the United States and Europe. This paper reports on a multi‐institutional, 5‐y testing program to evaluate Ni exposure, effects, and risk characterization in the Southeast Asia and Melanesia (SEAM) region, which includes New Caledonia, Papua New Guinea, the Philippines, and Indonesia. Further, we have developed an approach to determine if the individual components of classical ERA, including effects assessments, exposure assessments, and risk characterization methodologies (which include bioavailability normalization), are applicable in this region. A main conclusion of this research program is that although ecosystems and exposures may be different in tropical systems, ERA paradigms are constant. A large chronic ecotoxicity data set for Ni is now available for tropical species, and the data developed suggest that tropical ecosystems are not uniquely sensitive to Ni exposure; hence, scientific support exists for combining tropical and temperate data sets to develop tropical environmental quality standards (EQSs). The generic tropical database and tropical exposure scenarios generated can be used as a starting point to examine the unique biotic and abiotic characteristics of specific tropical ecosystems in the SEAM region. Integr Environ Assess Manag 2021;17:802–813. © 2021 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC)

Toxic and protective mechanisms of cyanobacterium Synechocystis sp. in response to titanium dioxide nanoparticles.

An increasing production and use of titanium dioxide nanoparticles (TiO2 NPs) pose a huge threat to phytoplankton since they are largely released into aquatic environments, which represent a sink for TiO2 NPs. However, toxicity and protective mechanisms of cyanobacteria in response to TiO2 NPs remain elusive. Here we investigated toxic effects of two sizes of TiO2 NPs (50 and 10nm) and one bulk TiO2 (200nm) on a cyanobacterium, Synechocystis sp. and their possible protective mechanisms. We found that 10nm TiO2 NPs caused significant growth and photosynthesis inhibition in Synechocystis sp. cells, largely reflected in decreased growth rate (38%), operational PSII quantum yields (40%), phycocyanin (51%) and allophycocyanin (63%), and increased reactive oxygen species content (245%), superoxide dismutase activity (46%). Also, transcriptomic analysis of Synechocystis sp. exposure to 10nm TiO2 NPs showed the up-regulation of D1 and D2 protein genes (psbA and psbD), ferredoxin gene (petF) and F-type ATPase genes (e.g., atpB), and the down-regulation of psbM and psb28-2 in PS II. We further proposed a conceptual model to explore possible toxic and protective mechanisms for Synechocystis sp. under TiO2 nanoparticle exposure. This study provides mechanistic insights into our understanding of Synechocystis sp. responses to TiO2 NPs. This is essential for more accurate environmental risk assessment approaches of nanoparticles in aquatic ecosystems by governmental environmental agencies worldwide.

A SPE-HPLC-MS/MS method for the simultaneous determination of prioritised pharmaceuticals and EDCs with high environmental risk potential in freshwater

This work describes the development, optimisation and validation of an analytical method for the rapid determination of 17 priority pharmaceutical compounds and endocrine disrupting chemicals (EDCs). Rather than studying compounds from the same therapeutic class, the analyses aimed to determine target compounds with the highest risk potential (with particular regard to Scotland), providing a tool for further monitoring in different water matrices. Prioritisation was based on a systematic environmental risk assessment approach, using consumption data; wastewater treatment removal efficiency; environmental occurrence; toxicological effects; and pre-existing regulatory indicators. This process highlighted 17 compounds across various therapeutic classes, which were then quantified, at environmentally relevant concentrations, by a single analytical methodology. Analytical determination was achieved using a single-step solid phase extraction (SPE) procedure followed by high-performance liquid chromatography with tandem mass spectrometry (HPLC-MS/MS). The fully optimised method performed well for the majority of target compounds, with recoveries >71% for 15 of 17 analytes. The limits of quantification for most target analytes (14 of 17) ranged from 0.07 ng/L to 1.88 ng/L in river waters. The utility of this method was then demonstrated using real water samples associated with a rural hospital/setting. Eight compounds were targeted and detected, with the highest levels found for the analgesic, paracetamol (at up to 105,910 ng/L in the hospital discharge). This method offers a robust tool to monitor high priority pharmaceutical and EDC levels in various aqueous sample matrices.

Comparison of species sensitivity distribution modeling approaches for environmental risk assessment of nanomaterials – A case study for silver and titanium dioxide representative materials

Species sensitivity distributions (SSDs) are used in chemical safety assessments to derive predicted-no-effect-concentrations (PNECs) for substances with a sufficient amount of relevant and reliable ecotoxicity data available. For engineered nanomaterials (ENMs), ecotoxicity data are often compromised by poor reproducibility and the lack of nano-specific characterization needed describe an ENM under test exposure conditions. This may influence the outcome of SSD modelling and hence the regulatory decision-making. This study investigates how the outcome of SSD modelling is influenced by: 1) Selecting input data based on the nano-specific “nanoCRED” reliability criteria, 2) Direct SSD modelling avoiding extrapolation of data by including long-term/chronic NOECs only, and 3) Weighting data according to their nano-specific quality, the number of data available for each species, and the trophic level abundance in the ecosystem. Endpoints from freshwater ecotoxicity studies were collected for the representative nanomaterials NM-300 K (silver) and NM-105 (titanium dioxide), evaluated for regulatory reliability and scored according to the level of nano-specific characterization conducted. The compiled datasets are unique in exclusively dealing with representative ENMs showing minimal batch-to-batch variation. The majority of studies were evaluated as regulatory reliable, while the degree of nano-specific characterization varied greatly. The datasets for NM-300 K and NM-105 were used as input to the nano-weighted n-SSWD model, the probabilistic PSSD+, and the conventional SSD Generator by the US EPA. The conventional SSD generally yielded the most conservative, but least precise HC5 values, with 95 % confidence intervals up to 100-fold wider than the other models. The inclusion of regulatory reliable data only, had little effect on the HC5 generated by the conventional SSD and the PSSD+, whereas the n-SSWD estimated different HC5 values based on data segregated according to reliability, especially for NM-105. The n-SSWD weighting of data significantly affected the estimated HC5 values, however in different ways for the sub-datasets of NM-300 K and NM-105. For NM-300 K, the inclusion of NOECs only in the weighted n-SSWD yielded the most conservative HC5 of all datasets and models (a HC5 based on NOECs only could not be estimated for NM-105, due to limited number of data). Overall, the estimated HC5 values of all models are within a relatively limited concentration range of 25−100 ng Ag/L for NM-300 K and 1−15 μgTiO2/L for NM-105.

Environmental Risk Assessment of Nanomaterials in the Light of New Obligations Under the REACH Regulation: Which Challenges Remain and How to Approach Them?

ABSTRACTWithin the European regulation on the Registration, Evaluation, Authorisation and Restriction of Chemicals (REACH, EC No 1907/2006) specific provisions for nanomaterials were included, which have become effective on 1 January 2020. Although knowledge on the peculiarities of testing and assessing fate and effects of nanomaterials in the environment strongly increased in the last years, uncertainties about how to perform a reliable and robust environmental risk assessment for nanomaterials still remain. These uncertainties are of special relevance in a regulatory context, challenging both industry and regulators. The present paper presents current challenges in regulatory hazard and exposure assessment under REACH, as well as classification of nanomaterials, and makes proposals to address them. Still, the nanospecific considerations made here are expected to also be valid for environmental risk assessment approaches in other regulations of chemical safety. Inter alia, these proposals include a way forward to account for exposure concentrations in aquatic toxicity test systems, a discussion of how to account for availability of dissolving nanomaterials in aquatic test systems, and a pragmatic proposal to deduce effect data for soil organisms. Furthermore, it specifies how to potentially deal with nanoforms under the European regulation on Classification, Labelling and Packaging of substances and mixtures (CLP) and outlines the needs for proper exposure assessments of nanomaterials from a regulatory perspective. Integr Environ Assess Manag 2020;16:706–717. © 2020 The Authors. Integrated Environmental Assessment and Management published by Wiley Periodicals LLC on behalf of Society of Environmental Toxicology & Chemistry (SETAC)

An innovative environmental risk assessment approach to a Mediterranean coastal forest: the Presidential Estate of Castelporziano (Rome) case study

Thanks to their ability to generate ecosystem services, forest ecosystems have a significant social, economic and environmental impact on the development of many regions in the world, especially those located in urban and peri-urban areas. Today, increased forest vulnerability is reflected in an increased number of episodes of severe decline associated mainly with drought. In this context, the Mediterranean area shows high forest vulnerability and a subsequent decline in its natural renewal rate. In this scenario, the aim of this research is to assess the sustainability of a protected pristine deciduous oak forest near Rome via the development of a forest health condition monitoring tool based on the application of multispectral satellite data and the identification of silvicultural models suitable to promoting natural forest renewal. Data and results from research in the case study area, the Natural State Reserve of Castelporziano (Rome), have potential as an important decision making tool in sustainable forest management.

Environmental health risk analysis due to PM10 during 2015’s smoke haze pollution in Sawahlunto City

This research was aimed to analyzed metal concentrations in particulate matter 10 (PM10) sampled from ambient air in Sawahlunto City during the occurrence of smoke-haze pollution in 2015. The metal contents comprise of Al, Cr, Mn, Co, Ni, and Cd, which represented the potential for both non-carcinogenic and carcinogenic illnesses. The obtained metal concentrations were further used to estimate health risk on human by using environmental health risk assessment approach. PM10 samplings were done by using Minivol Air Sampler while the metal concentration analysis was conducted by atomic absorption spectrophotometer after PM10 filter destruction. It was found out that during the smoke-haze pollution the PM10 concentrations were above Indonesian air quality standard and considered at hazardous level in accordance to the Indonesian air quality index. The results of environmental health risk assessment for children and adults show the Hazard Quotient (HQ) value > 1 for non-carcinogenic metals (Al, Cr, Mn). As for the carcinogenic metals (Co, Ni, Cd), it was estimated that the Excess Lifetime Cancer Risk (ELCR) > 10-6 for both children and adults. It can be concluded that the occurrence of smoke-haze pollution in Sawahlunto City in 2015 increased the risk of cancer illnesses in both children and adults due to the high metal concentrations in PM10.

Hydrogen Sulfide Exposure to Public Health Risk Around Cibereum Landfill Area at Banjar City

The process of spoilage of waste in the landfill produces air pollutant gases such as hydrogen sulfide (H2S) which was a colorless gas, highly flammable, and has a characteristic rotten egg odor. Communities around TPA who were continuously exposed to H2S gas has very at risk of experiencing health problems. The main entrance of H2S gas through the respiratory system so that it was quickly absorbed by the lungs rather than exposure through the mouth. This study aims to analyze the great health risks arising from exposure to hydrogen sulfide gas at the Cibeureum landfill in Banjar City. This research was a descriptive-analytic type with cross-sectional study design and it was analyzed with an environmental health risk assessment (EHRA) approach. The results of H2S concentration measurements were 0,004 ppm and still below the 0,02 ppm standard. Exposure projections indicate that people in the surrounding areas do not yet have non-carcinogenic risks (0,42≤1). The safe duration of exposure is 24 years. If residents still live around the landfill for more than 24 years, it will endanger them and cause non-carcinogenic health risks. Complaints caused by civilians around the landfill consist of coughing, headaches, colds, shortness of breath, chest pain, and sore throat.

Application of new statistical distribution approaches for environmental mixture risk assessment: A case study.

ObjectivesThere is growing evidence that single substances present below their individual thresholds of effect may still contribute to combined effects. In component-based mixture risk assessment (MRA), the risks can be addressed using information on the mixture components. This is, however, often hampered by limited availability of ecotoxicity data. Here, the possible use of ecotoxicological threshold concentrations of no concern (i.e. 5th percentile of statistical distribution of ecotoxicological values) is investigated to fill data gaps in MRA.MethodsFor chemicals without available aquatic toxicity data, ecotoxicological threshold concentrations of no concern have been derived from Predicted No Effect Concentration (PNEC) distributions and from chemical toxicity distributions, using the EnviroTox tool, with and without considering the chemical mode of action. For exposure, chemical monitoring data from European rivers have been used to illustrate four realistic co-exposure scenarios. Based on those monitoring data and available ecotoxicity data or threshold concentrations when no data were available, Risk Quotients for individual chemicals were calculated, to then derive a mixture Risk Quotient (RQmix).ResultsA risk was identified in two of the four scenarios. Threshold concentrations contribute from 24 to 95% of the whole RQmix; thus they have a large impact on the predicted mixture risk. Therefore they could only be used for data gap filling for a limited number of chemicals in the mixture. The use of mode of action information to derive more specific threshold values could be a helpful refinement in some cases.

A multibiomarker approach for evaluating environmental contamination: Common carp (Cyprinus carpio) transplanted along a gradient of metal pollution

Environmental monitoring and risk assessment approaches which include a more holistic view on the effects of pollutants on biota are increasingly sought by regulators and policy makers. Therefore, caged carp juveniles (Cyprinus carpio) were transplanted for 7 weeks along a known Cd and Zn pollution gradient. Metal (Cu, Cd and Zn) accumulation in gill and liver tissue and effect biomarkers (growth, condition factor (CF), hepatosomatic index (HSI), oxygen consumption, swimming capacity, Na+/K+-ATPase activity (NKA) and metallothionein (MT) levels) were compared.Up to 10-fold higher cadmium concentrations were measured in the gills of the fish at the most polluted locations compared to the laboratory control fish. Similarly, cadmium concentrations in liver tissues of field-exposed fish were significantly higher than those measured in laboratory control fish. Cu and Zn concentrations in the gills were not significantly different between field-exposed and control organisms, whereas higher levels in liver tissues were measured in carps deployed in some locations. Effects on liver MT levels were up to 10 times greater for organisms exposed to the field, whereas no clear effect of the metal exposure on NKA in the gill tissue was observed. A decrease in muscle glycogen stores was observed for all organisms deployed in the field, while liver glycogen levels decreased only in fish exposed to two of the 5 sites compared to the laboratory control fish. Additionally, significant drops in liver protein- and lipid stores were observed. No effect on oxygen consumption rates and swimming capacity was observed. The CF and HSI of caged fish reflected the pollution gradient in the river and considerable loss of weight was observed for fish transplanted in the most polluted site. Overall, this active biomonitoring study successfully revealed differences in metal accumulation, physiological and organismal endpoints as a direct consequence of field exposure.

Impact of the wastewater-mixing zone on attenuation of pharmaceuticals in natural waters: Implications for an impact zone inclusive environmental risk assessment

The direct discharge of untreated wastewater has been identified as an important source of environmental contamination by active pharmaceutical ingredients and other ‘down-the-drain’ chemicals in developing countries. It necessitates the development of an environmental risk assessment approach for the resulting impact zone. This study was designed to investigate the impact of low level of dilution (<10) on the natural attenuation processes of distribution and degradation within the impact zone. Dilution of the untreated wastewater resulted in increased desorption and corresponding environmental concentrations. The presence/absence of the microbial population in the batches affected the degree of sorption depending on the compound charge (i.e. positive or negative), highlighting an experimental technical bias. The degradation half-lives of acebutolol and diclofenac increased with increasing dilution and resulted in higher environmental persistence. The modelling of the biochemical oxygen demand (BOD) allowed an estimate of the temporal end boundary of the impact zone to be predicted as 24h. Therefore, it was concluded that most of the investigated compounds would persist beyond the end of the impact zone as defined by the return to environmental BOD concentrations. It is proposed that, within environmental risk assessment protocols, the impact zone should be considered as a semi-natural wastewater treatment area in such a way to allow the estimate of environmental concentrations of pharmaceuticals beyond its end.

A new fuzzy-based approach for environmental risk assessment

Due to new regulations, laws and increasing demand from consumers, companies begin to enhance their environmental management practices. Hence, environmental risk assessment became one of the critical success factors for companies in order to be successful. Environmental risk assessment approaches under Occupational Health and Safety (OHS) activities vary among industries and taking precautions about environmental issues lead researchers and practitioners to create new approaches. Also, subjectivity of existing methods, advancement of technology, and aim to minimize risk levels and rivalry among competitors are some of the main reasons for development of new approaches. This study aims to propose a new fuzzy-based approach for environmental risk assessment along with Analytical Hierarchy Process (AHP) for environmental risk assessment. Hereby, along with the consideration of categorical impacts such as to human health and environment, new approach is applied and compared with classic AHP results. According to the implementation results on a chemical ranch of a textile company, new approach minimizes subjectivity besides of flexible, original, and easy to implement for researchers and practitioners.

EFSA Scientific Colloquium 24 – 'omics in risk assessment: state of the art and next steps

In recent years, the development of innovative tools in genomics, transcriptomics, proteomics and metabolomics (designated collectively as 'omics technologies) has opened up new possibilities for applications in scientific research and led to the availability of vast amounts of analytical data. The interpretation and integration of 'omics data can provide valuable information on the functional status of an organism and on the effect of external factors such as stressors. The European Food Safety Authority's (EFSA) 24th Scientific Colloquium on 'omics in risk assessment: state of the art and next steps explored the opportunities for integration of datasets produced via specific 'omics tools within the remit of EFSA's risk assessment approaches and tried to build further towards concrete paths of implementation. Discussions focused on genomics in microbial strain characterisation, metabolomics for the comparative assessment of GM plants and the use of 'omics for toxicological and environmental risk assessment. From the Colloquium it became clear that 'omics technologies are a valuable addition in some aspects of risk assessment of food and feed products and the environment, especially now that this technology is almost mature and stable. However, a consistent reporting framework for data collection, processing, interpretation, storage and curation should be further drawn up together with national and international organisations before 'omics technologies can be routinely used in risk assessment. For 'omics datasets in chemical and environmental risk assessments, the use of 'omics technologies alongside current toxicological or environmental risk assessment approaches is needed to re-inforce confidence and expertise before implementation of these datasets as a standalone tool in risk assessment. Test cases could be worked out to enhance confidence in the use of 'omics datasets in risk assessment.