Application Of Surfactants Research Articles

Microscopic Origin of Surfactant Irritation: An Experimental and Computational Study.

Surfactants, which are widely used in skin care products and cleansers, can cause skin irritation. The skin irritation potential of surfactants is fundamentally determined by their molecular structure and is directly related to their microscopic aggregation structure and specific interactions with the skin. The microscopic origin of the irritation of the surfactants remains unknown. In this work, irritation properties of four surfactant solutions were measured, and their microscopic aggregation behavior was systematically analyzed. The results indicate that the surfactants self-assembled in aqueous solution to form aggregates with different morphologies, where the head groups of surfactants were closer to each other. Furthermore, surfactants that can form larger and more stable aggregate structures in aqueous solutions will exhibit less irritation. These findings hold significant implications for the design and expanded applications of mild surfactants.

Alpha-Bisabolol-Loaded Cosmetic Micellar Solution with Cleansing and Antimicrobial Action for Facial Skin Hygiene

The current research is focused on the discovery and optimization of an effective cosmetic carrier of alpha-bisabolol as a first step in the development of a cosmetic product with cleansing and antimicrobial action for facial skin hygiene. A micellar solution of Poloxamer 407 was selected as a cosmetic base because of the good washing ability, easy application, and high tolerability of this polymeric surfactant. The solubilization capacity of a 5% micellar solution with respect to α-bisabolol was investigated by applying varying solubilization techniques and increasing concentrations of the oily active substance. The test samples were subjected to an accelerated physical stability test, viscosimetry, dynamic light scattering (DLS), electrophoretic light scattering (ELS), foamability test, and antimicrobial screening. Over the course of this research, the advantage of the film-hydration method over direct solubilization was demonstrated by the narrower size distribution and smaller hydrodynamic size of the micellar nano-carriers (ranging from 29.02 to 116.5 nm) and the respective higher physical stability of the dispersions. The optimized composition was found to be suitable for application on large skin areas in terms of viscosity in the temperature range from 20 °C to 40 °C (3.4–2.3 mPa.s). Preservation of the washing capacity of the micellar solution in the presence of solubilized α-bisabolol was established. The active composition demonstrated inhibitory activity against Staphylococcus aureus and Escherichia coli and fungicidal activity against Candida albicans. This study concludes that the optimal concentration of α-bisabolol to be solubilized in a 5% Poloxamer 407 micellar solution by the film-hydration technique is 1%, considering the desirable physical endurance and antimicrobial activity.

Review and Prospect of Viscoelastic Surfactant Diverting Acid

Abstract With the rapid development of social economy, global energy demand is growing rapidly. Carbonate reservoirs have attracted much attention due to their wide distribution and large reserves. Due to the heterogeneity of carbonate reservoirs, conventional acidification technology cannot meet the production requirements, and diverting acid must be used to achieve effective development. The biggest problem of commonly used polymer-based diversion acid is the polymer residue after acidification. In recent years, the viscoelastic surfactant diverting acid (VEDA) system has attracted much attention because it can be decomposed by a simple cleaning process after the temporary plugging and diverting acid operation is completed. This paper studies the VEDA system through a large number of literature research. The properties of (VES) were introduced, and the application of viscoelastic surfactant in VEDA was analyzed. Secondly, the working principle of VEDA acid system is listed and several methods for evaluating the diverting ability of VEDA (pressure drop curve, permeability change, wormhole expansion) are introduced. Then, the VEDA rheological model established by various scholars was summarized. Finally, the commonly used VEDA system and its application in this field are summarized.

Revealing protein aggregation behaviour and dispersion properties induced by molecular interactions between sucrose esters and myofibrillar protein in an aqueous phase system

The effects of sucrose esters (SE) with varying hydrophilic-lipophilic balance (HLB) values (SE 11, 13, 15) and different concentrations (0.01, 0.1, 1.0 mM) on the dispersion properties and structure of myofibrillar proteins (MPs) in the aqueous phase were investigated. The results demonstrated that the SE 11 and SE 13 reduced the particle size and enhanced the distribution uniformity of the MPs. All of the SE exhibited a slight reduction in the ζ-potential absolute values of the MPs. Meanwhile, the SE 11 significantly reduced the turbidity of the MPs, especially in the 0.1 mM group. Macroscopic and microscopic images showed that the optimum dispersion state was in the SE 11–0.1 group. Furthermore, the interactions between SE and MPs exerted a significant impact on the proteins structure. The SE 13 and SE 15 caused significant changes, which presented concentration correlation, in the tertiary and secondary spatial structures of the MPs. Nevertheless, slight structural changes were observed in MPs with different SE11 concentrations. The SE did not alter the molecular weight of the MPs, i.e. it did not induce irreversible aggregation, nor degradation of the proteins. These results were verified by the surface hydrophobicity, UV–Vis spectroscopy, intrinsic fluorescence, circular dichroism, and SDS-PAGE. Molecular docking simulation showed that hydrophobic interactions and hydrogen bonds were the main interaction force between SE 11 and MPs. Therefore, our findings provided meaningful insights into the dispersion state of the MPs aqueous containing SEs and contributed to the practical application of non-ionic surfactants in meat protein processing.

Application of surfactants for the resolution of emulsions and suspensions in slop oil storage tanks, cleaning, and final disposal

AbstractIn order to provide environmental solutions for the treatment of oily residues (slop oil) from refineries, formulations with surfactants were proposed according to the type of dispersed system of the slop (crude oil emulsified with water and/or solid particles). Samples were collected in 12 tanks located at the Oxialquilados Venezolanos C.A., Barcelona Plant (Anzoátegui, Venezuela), performing physicochemical tests for the identification of the dispersed system (solubility, wettability, stability, water content) and microscopic observations (morphology and particle size). The results indicated heterogeneous slop samples with a water content of 2%–60% vol/vol consisting of single or multiple emulsions, with droplet sizes between approximately 10 and 30 micron; others formed by sludge or suspension (solids/oil/water). For the destabilization of these systems, aqueous and organic cleaning solutions were designed, determining the percentage of oil separated in the bottle tests at optimal and simulated field conditions. Field tests with volume scaling of the slop tank reported efficiencies of 63%, 85%, and 100% when treating the slop TK‐17, TK‐36, EE, respectively; for the mixture (Pulmon‐2) an efficiency of 47%. By combining heat treatment and two demulsifiers was possible to treat the slop TK‐17 (multiple emulsion). A considerable volume of water can be drained from the tanks for use in the plant. In conclusion, the surfactant formulas were effective in the recovery of a significant amount of crude oil, making it feasible to return it to the generating entity.

Mechanisms of surfactant improving water injection huff and puff efficiency in tight reservoir

Water injection huff and puff is an economical and effective method to enhance the recovery of tight oil reservoir, in which the addition of suitable surfactants is critical, but its mechanism needs to be further studied. In this paper, the huff and puff process is divided into replenishment, imbibition and water flooding stages. This study compared and analyzed the effects of various surfactants on interfacial tension, wettability, flow resistance, and oil washing efficiency, using mineralized water as the control group. The relationships between different surfactants and imbibition recovery efficiency, water flooding recovery efficiency, and flooding pressure were investigated. The mechanisms by which surfactants influence the imbibition and flooding processes were also explored. The results show that, the effect of permeability on imbibition and water flooding recovery efficiency in natural cores can be ignored. During the imbibition stage, the maximum recovery efficiency with mineralized water is 18.33 %, while with surfactants it is 21.40 %. In the water flooding stage, the maximum recovery efficiency with mineralized water is 3.89 %. The addition of surfactants significantly increases the water flooding recovery efficiency to 19.82 %. Furthermore, surfactants can reduce the water flooding pressure by approximately 7.00 MPa and increase the total recovery rate by about 5.00 %. The primary mechanisms by which surfactants improve the water injection huff and puff effect include reducing interfacial tension, altering wettability, facilitating crude oil detachment from rock surfaces, and enhancing oil washing efficiency. Reduction of flow resistance, leading to a decrease in the pressure required for flooding. The research results provide a theoretical basis for the practical application of surfactants in water injection huff and puff in tight reservoirs.

Insights into the dual effect of an amphiphilic additive on hydrate formation from a water structure perspective

Chemical additives play an important role in gas hydrate formation, which involves the transformation of water structure. However, the relationship between the effects of additives on water structure and hydrate formation is inconclusive, especially for amphiphilic molecules. Here, we investigate the changes in water structure caused by rhamnolipid (Rha) biosurfactants and the resulting effect on methane hydrate formation through kinetic experiments, morphological observation, and in situ Raman spectroscopy. The Gaussian peaks of strongly hydrogen-bonded and weakly hydrogen-bonded water are identified, of which the integrated intensity and position are compared. It is found that the dual effect of Rha on hydrate formation kinetics, namely nucleation inhibition and growth promotion, is attributed to the ordered arrangement of water molecules with stronger hydrogen bonding interactions induced by the charged head groups. The strongly hydrogen-bonded water inhibits nucleation but promotes growth. In addition, the adsorption of Rha on montmorillonite (MMT) eliminates the changes in water structure and the dual effect of hydrate formation kinetics, providing further evidence for the above conclusion. These insights pave the way for a deeper understanding of hydrate formation kinetics from a water structure perspective, as well as providing a scientific basis for the commercial application of surfactants.

Bermudagrass fairway responses to various combinations of a soil surfactant and nitrogen

AbstractSurfactants are commonly employed in sand‐based turfgrass systems to address soil water repellency, which often results in the formation of preferential flow channels leading to non‐uniform wetting patterns. While the influence of soil moisture on nutrient dynamics is well documented, the potential of surfactants to improve N uptake remains poorly understood. A 2‐year study was conducted on ‘Celebration’ bermudagrass [Cynodon dactylon (L.)] fairway to better understand the interaction between fertility programs (296 or 586 kg N ha−1 year−1 from ammonium sulfate and 564 kg N ha−1 year−1 primarily from a controlled‐release N fertilizer) and surfactant rate and frequency (3.2 L ha−1 every 14 or 28 days, or at 6.4 L ha−1 every 28 days) on turfgrass performance, leaf N content, and soil moisture. Overall, no significant interaction was observed between surfactant treatment and fertility program. During the dry season (November to May), fertility programs influenced turfgrass performance parameters with higher N rates consistently leading to improvements in visual quality, normalized difference vegetation index, percent green cover, and dark green color index; however, no differences were observed during the rainy season (June to October). Surfactants showed no effect on turfgrass performance but led to minimal increase in leaf N content from 3.72% to 3.85%. All surfactant treatments reduced water drop penetration time at 0 cm. Moreover, surfactant treatments applied every 28 days regardless of the rate exhibited a higher volumetric water content compared to those applied every 14 days. Surfactant applications might not be an economically feasible strategy to improve leaf N content in South Florida well‐watered bermudagrass fairways.

Polyetheramine enhanced biosurfactant/biopolymer flooding for enhanced oil recovery

The application of conventional alkali, surfactant and polymer in alkali/surfactant/polymer (ASP) flooding has exposed the inherent shortcomings of pollution and damage to reservoirs. Hence, finding new environmentally friendly alternatives is essential for the sustainable development of ASP flooding. In this paper, we proposed a novel ternary combination utilizing organic alkali polyetheramine, biosurfactant, and biopolymer as alternative chemical agents for ASP flooding. Specifically, the ASP system composed of polyetheramine D230, biosurfactant sophorolipid (SL) and biopolymer welan gum (WLG) exhibited excellent potential in improving oil recovery. The interfacial tension measurements proved that D230 could react with organic acids in crude oil to generate surface-active soaps, which cooperated with SL to reduce the oil–water interfacial tension to 10−2 mN/m. The rheological measurements demonstrated that the addition of D230 could increase the viscosity of low concentration WLG solution, but this phenomenon gradually disappeared with the rise of WLG concentration. Even at higher WLG concentration, D230 only caused a slight decrease in system viscosity, which facilitated the improvement of sweep efficiency. Emulsification and contact angle measurements indicated that D230/SL blend had outstanding emulsifying ability and successfully altered the quartz surface from oil-wet to water-wet. Core flooding experiments and micromodel experiments showed that the D230/SL/WLG system significantly enhanced oil recovery by 22.66 %, which was attributed to the high viscosity, low interfacial tension, excellent wettability reversal and emulsifying abilities of the system. The economic benefit assessment indicated that this ASP system has the potential to be economic, rendering it profitable even during periods of low oil prices. Furthermore, the EC50 value of 52,600 mg/L for D230/SL/WLG demonstrated its environmental friendliness.

Surfactant-enhanced mobilization of polycyclic aromatic hydrocarbons from an historically contaminated marine sediment: Study of surfactants’ concentration effect and continuous test for sediment flushing simulation

Contamination of marine sediments by polycyclic aromatic hydrocarbons (PAHs) poses a significant environmental threat, necessitating effective remediation strategies. This paper investigates the application of surfactants, both synthetic and natural, for the remediation of PAH-contaminated sediments, providing a systematic guideline for the preliminary selection of surfactants for flushing/washing operations, the optimal operative conditions, and the technical approach for PAH mobilization, especially in the context of a real aged contamination scenario. The study included a batch configuration test to evaluate the effect of surfactant concentration on PAH mobilization. Subsequently, a continuous configuration column experiment was performed to simulate a flushing operation of contaminated sediment. The study of process conditions highlighted that the increase in surfactant concentration led to a significant increase in PAH removal from the sediment, reaching almost 30 % efficiency using a 5 % wt surfactant solution. The column test showed great efficiency of the investigated surfactants in PAH mobilization through the flushing process of the contaminated matrix, resulting in 30 times greater efficiency than water within a much smaller pore volume range.

Electrochemical applications of surfactants

Electrochemical applications of surfactants

Manipulation of artificial and living small objects by light driven diffusioosmotic flow

Here we report on light-triggered generation of local flow utilizing a bio-compatible non-ionic photo-active surfactant. The mechanism is based on diffusioosmotic phenomenon, where the gradient of relative concentration with respect to different chemical species near a surface leads to an osmotic pressure gradient driving liquid flow along the surface. The application of a photo-responsive surfactant allows for easy and reversible changes in concentration gradient by positioning a light source at the desired place. Along with the so-inscribed concentration gradient one can change reversible the direction and strength of the flow even in a closed system. The phenomenology of light-driven diffusioosmotic flow (LDDO) can be used in a rather flexible way: colloids can be gathered or dispersed and bio-compatibility extends the range of colloid types also to living microorganisms such as soil bacterium Pseudomonas putida. We show that DO flow can be considered a versatile method to set hydrodynamic conditions along the sample for investigating the motility of living cells. Further advantages of employing LDDO are the flexibility of flow generation in a reversible way and with spatiotemporal control, without the need to either change the channel geometry by loading a different device, or the periphery of pumps and connectors.

A Review of Recent Advancements and Perspectives of Nanotechnology in the Application of Biomedical Imaging and Instrumentation

AbstractThe development of imaging, diagnosis, prognosis and early detection of diseases has been greatly impacted by nanotechnology by enhancing already existing clinically applicable technologies. With the help of their capacity to alter nanoparticles for molecular‐level specificity, tissue‐specific diagnosis is made possible gratitude to the unique biophysical features of the nanoparticles that enable contrast augmentation will boost biomedical imaging. The unique prospect of multiplexing is possible by the fact that minute changes in the nanoparticles’ size or composition can have significant effects on their optical, magnetic, or electrical capabilities. This article examines nanotechnology's function in biomedical imaging. In this article, the fundamentals and applications of biomedical imaging, pharmaceutical application of microbial surfactants, intelligent drug delivery systems, and green metallic nanoparticle manufacturing are all examined. The biomedical applications comprising organic (carbon nanotubes, metal oxide and liposomes) and inorganic (metal oxide, metal) nanoparticles, and materials with nanopatterns in diagnostics, biosensing, and bioimaging devices, along with drug delivery systems, are the main topics of discussion. studies conducted in vitro and in vivo have demonstrated that different nanoparticles can be utilized to detect seizures early and precisely along with to treat them successfully. To decrease the possible toxicity and enable improved target specificity, respectively, more development in the synthesis and functionalization of adaptable nanotechnologies is required.

Applicability of cationic surfactants, anionic surfactants, and nonionic surfactants as foaming agents for foamed concrete: surface activity, foamability, and interaction with cement

Selecting the appropriate surfactant as a foaming agent is crucial in the production of foamed concrete. In this study, multiple technological approaches were employed for the investigation of the effect of three different types of surfactants as foaming agents; the approaches included surface tension measurement, zeta potential analysis, spectrophotometry, and nanoindentation. The results showed that the surface activity, solution viscosity, and environmental pH all influenced the generation and stability of foam in foaming agents. The adsorption process of surfactants onto cement particles was complex and could be effectively explained using the double-layer theory. The adsorption of anionic surfactant molecules on cement particles significantly altered the zeta potential, up to −17 mV, with an adsorption efficiency over 10 times greater than that of cationic surfactants and more than 5 times greater than that of nonionic surfactants. Furthermore, after cement hardening, the mechanical properties of the resulting pores were notably improved due to the presence of adsorbed anionic surfactants, and the maximum compressive strength could exceed 10 MPa.

Prospective, non-blinded, randomized controlled trial on early administration of pulmonary surfactant guided by lung ultrasound scores in very preterm infants: study protocol.

Bedside lung ultrasonography has been widely used in neonatal intensive care units (NICUs). Lung ultrasound scores (LUS) may predict the need for pulmonary surfactant (PS) application. PS replacement therapy is the key intervention for managing moderate to severe neonatal respiratory distress syndrome (NRDS), with early PS administration playing a positive role in improving patient outcomes. Lung ultrasonography aids in the prompt diagnosis of NRDS, while LUS offers a semi-quantitative assessment of lung health. However, the specific methodologies for utilizing LUS in clinical practice remain controversial. This study hypothesizes that, in very preterm infants [<32 weeks gestational age (GA)] exhibiting respiratory distress symptoms, determining PS application through early postnatal LUS combined with clinical indicators, as opposed to relying solely on clinical signs and chest x-rays, can lead to more timely PS administration, reduce mechanical ventilation duration, improve patient outcomes, and lower the occurrence of bronchopulmonary dysplasia (BPD). This is a protocol for a prospective, non-blinded, randomized controlled trial that will be conducted in the NICU of a hospital in China. Eligible participants will include very preterm infants (< 32 weeks GA) exhibiting signs of respiratory distress. Infants will be randomly assigned in a 1:1 ratio to either the ultrasound or control group. In the ultrasonography group, the decision regarding PS administration will be based on a combination of lung ultrasonography and clinical manifestations, whereas in the control group, it will be determined solely by clinical signs and chest x-rays. The primary outcome measure will be the mechanical ventilation duration. Statistical analysis will employ independent sample t-tests with a significance level set at α = 0.05 and a power of 80%. The study requires 30 infants per group (in total 60 infants). This study aims to demonstrate that determining PS application based on a combination of LUS and clinical indicators is superior to traditional approaches. This approach may enhance the accuracy of NRDS diagnosis and facilitate early prediction of PS requirements, thereby reducing the duration of mechanical ventilation. The findings of this research may contribute valuable insights into the use of LUS to guide PS administration.

Research on microscopic wetting mechanism of talcum powder by compounded surfactant for spraying dust reduction

Adding surfactant is an effective method to improve the dust removal efficiency of talcum powder dust. Based on the optimization of surfactants, this paper proposed an efficient compound surfactant scheme by calculating interaction parameters, adsorption simulation, and wettability test experiments. Molecular dynamics simulation was used to analyze the interaction mechanism between compound surfactant and talcum powder. Tests of spraying talcum powder with compound surfactants under different pressures were carried out. The results show that the combination of anionic surfactants SDS and SDBS with nonionic surfactants Tween 80 and AEO9 has a positive synergistic effect. The better the wetting effect of the compound system, the more ordered the surfactant molecules are arranged. Meanwhile, the diffusion ability of water molecules is stronger, and the thickness of the solid-liquid interface is larger. The wetting effect of compound surfactant on talcum powder is mainly influenced by van der Waals force. The dust removal efficiency test shows that SDS-Tween 80 compound surfactant with a pressure of 1.5 MPa and molar ratio of 0.4:0.6 is the best spray dust removal scheme. The research results are helpful to guide the application of compound surfactants in talcum powder dust control.

Study of Interfacial Properties of Anionic–Nonionic Surfactants Based on Succinic Acid Derivatives via Molecular Dynamics Simulations and the IGMH Method

Surfactants are widely used in fields such as oil recovery and flotation. The properties and mechanisms of surfactants can be effectively studied using molecular dynamics (MD) simulations. Herein, the aggregation behavior of surfactants was studied at the oil–water interface by MD simulation, and the micro-morphology of surfactants was analyzed under a low concentration and saturated state at the oil–water interface, respectively. The visualization results of the MD simulation showed that DTOA was saturated at the oil–water interface at 120 surfactant molecules, whereas 160 surfactant molecules were required for BEMA. In addition, the effect of surfactant concentration on the interfacial thickness and hydrogen bond distribution was studied, with the inflection point of hydrogen bond distribution identified as a characteristic parameter for surfactant saturation at the oil–water interface. The aggregation behavior of their hydrophobic and hydrophilic chains at the oil–water interface was qualitatively assessed using order parameters. Finally, the aggregation state of surfactants in salt-containing systems was studied, and it was found that the surfactants could effectively adsorb magnesium ions and calcium ions at the oil–water interface. However, the curve of the number of hydrogen bonds varies greatly, with a possible reason being that BEMA has a different coordination manner with diverse metal ions. This study provides some original insights into both the theoretical study and practical application of anionic and nonionic surfactants.

Application of Sodium Methyl Ester Sulfonate Anionic Surfactants as Corrosion Inhibitors for Carbon Steel in Oilfield Injection Water

Application of Sodium Methyl Ester Sulfonate Anionic Surfactants as Corrosion Inhibitors for Carbon Steel in Oilfield Injection Water

Predicting the Temperature Dependence of Surfactant CMCs Using Graph Neural Networks.

The critical micelle concentration (CMC) of surfactant molecules is an essential property for surfactant applications in the industry. Recently, classical quantitative structure-property relationship (QSPR) and graph neural networks (GNNs), a deep learning technique, have been successfully applied to predict the CMC of surfactants at room temperature. However, these models have not yet considered the temperature dependence of the CMC, which is highly relevant to practical applications. We herein develop a GNN model for the temperature-dependent CMC prediction of surfactants. We collected about 1400 data points from public sources for all surfactant classes, i.e., ionic, nonionic, and zwitterionic, at multiple temperatures. We test the predictive quality of the model for the following scenarios: (i) when CMC data for surfactants are present in the training of the model in at least one different temperature and (ii) CMC data for surfactants are not present in the training, i.e., generalizing to unseen surfactants. In both test scenarios, our model exhibits a high predictive performance of R2 ≥ 0.95 on test data. We also find that the model performance varies with the surfactant class. Finally, we evaluate the model for sugar-based surfactants with complex molecular structures, as these represent a more sustainable alternative to synthetic surfactants and are therefore of great interest for future applications in the personal and home care industries.

Investigating the impact of cellulose microgel nanofabrication on the rheological properties of this binary rheology modifier

The multifunctionality of advanced laundry detergents primarily relies on the inclusion of functional solid particles, such as pearlescent powder, enzymes, and perfume microcapsules. However, the high-content surfactants in these detergents can render most existing suspending rheology modifiers ineffective, making it challenging to achieve uniform suspension of these functional particles. This compromises the overall functionality of laundry products. To address this, we have developed a binary rheology modifier comprising cellulose microgel and HPMC (hydroxypropyl methylcellulose), acting as the “island” and “chain,” respectively. Together, they form an interconnected dynamic network that effectively “encapsulates” the functional particles. Furthermore, the cellulose microgel/HPMC rheology modifier demonstrates versatility, proving effective with various surfactants. Despite its potential, the suspension mechanism of cellulose microgel/HPMC remains elusive. Therefore, we conducted a comprehensive investigation, fabricating cellulose microgels with varying nanofabrication degrees and surface charges through TEMPO oxidation. Our findings highlight the critical role of the surficial structure of T-Microgel, specifically its nanofabrication degree, in influencing the dynamic network's fabrication, thereby impacting yield and thixotropic properties. The surface charge of T-microgel does not significantly influence the process. This research not only elucidates the intricate dynamics of cellulose microgel/HPMC interaction but also provides fundamental insights essential for the development of innovative rheology modifiers tailored for high-content surfactant applications.