Application Of Materials Research Articles

Application Analysis of Biodegradable Polymer Materials in Food Packaging

With the rapid development of biotechnology, the society pays more attention than in the past to the production and development of environmental protection. Choosing materials has always been a more important part of environmental protection work, among them, the degradable polymer materials are also professional research topics, it can be self-degradation under certain conditions, with far-reaching environmental protection value and social significance. Food packaging is a kind of carrier that plays a protective role in packaging, preservation and sales of food, the application of degradable polymer materials in food packaging can play a positive role in environmental protection, reducing environmental pollution and building an ecological society. In this paper, the active application of biodegradable polymer materials for food packaging is elaborated, hoping to provide theoretical reference.

Dual Roles of the Photooxidation of Organic Amines for Enhanced Triplet-Triplet Annihilation Upconversion in Nanoparticles.

Oxygen-mediated triplet-triplet annihilation upconversion (TTA-UC) quenching limits the application of such organic upconversion materials. Here, we report that the photooxidation of organic amines is an effective and versatile strategy to suppress oxygen-mediated upconversion quenching in both organic solvents and aqueous solutions. The strategy is based on the dual role of organic amines in photooxidation, i.e., as singlet oxygen scavengers and electron donors. Under photoexcitation, the photosensitizer sensitizes oxygen to produce singlet oxygen for the oxidation of alkylamine, reducing the oxygen concentration. However, photoinduced electron transfer among photosensitizers, organic amines, and oxygen leads to the production of superoxide anions that suppress TTA-UC. To observe oxygen-tolerating TTA-UC, we find that alkyl secondary amines can balance the production of singlet oxygen and superoxide anions. We then utilize polyethyleneimine (PEI) to synthesize amphiphilic polymers to encapsulate TTA-UC pairs for the formation of water-dispersible, ultrasmall, and multicolor-emitting TTA-UC nanoparticles.

Defective Diamane: A Superior Sensor for Toxic Gases Capture and Detection with Excellent Selectivity, Sensitivity, and Reversibility at Room Temperature.

The toxic gases emitted from industrial production have caused significant damage to the environment and human health, necessitating efficient gas sensors for their detection and removal. In this work, first-principles calculations are employed to investigate the potential application of diamanes for high-performance toxic gas sensors. The results show that nine gas molecules (CO, CO2, NO, NO2, NH3, SO2, N2, O2, and H2O) are physisorbed on pristine diamane by weak van der Waals interactions. After introducing H/F defects, diamane can effectively capture specific toxic gases (CO, NO, NO2, and SO2) in the presence of interfering gases (N2, O2, and H2O), suggesting excellent selectivity and anti-interference ability. Orbital hybridization and significant charge redistribution between gas molecules and defective diamane dominate the enhanced adsorbate-substrate interactions. More importantly, the high sensitivity and good reversibility of defective diamane for detecting CO, NO, and SO2 molecules enable its reuse as a superior resistance-type gas sensor. Our calculations provide valuable insights into the potential of defective diamane for detecting toxic gases and shed light on the practical application of novel carbon-based materials in the gas-sensing field.

Implementation of excellent spin-filtering effect in half-metallic electrode-based single-molecule optoelectronic devices

The application of half-metallic materials in single-molecule optoelectronic devices opens a promising way in advancing device performance and functionality, thus addressing a research question of significance. Here we propose a series of single-molecule devices with half-metallic FeN4-doped armchair graphene nanoribbon as electrodes and metalloporphyrin (MPr) molecules as photoresponsive materials for photon harvesting, which are driven by photogalvanic effects (PGEs). Through the quantum transport simulations, we systematically investigated the spin-polarized photocurrents under the linearly polarized light illumination in these devices. Since the exclusive opening only exists in the spin-up channel of the half-metallic nanoribbons, these devices can generate a large photocurrent in the spin-up direction whereas suppressing the spin-down photocurrent. Consequently, they exhibit an effective spin-filtering effect at numerous photon energies. Our study unveils the excellent spin-filtering effect achieved in single-molecule optoelectronic devices with half-metallic electrodes, showing instructive significance for the future design of new optoelectronic devices.

Effect of (Al3+/Ta5+) co-doped on dielectric properties of CdCu3Ti4O12 ceramics

In this work, dense CdCu3(Al[Formula: see text]Ta[Formula: see text]Ti[Formula: see text]O[Formula: see text] ceramics were prepared by a conventional solid phase method. The effect of Al[Formula: see text]/Ta[Formula: see text] dopants on the dielectric properties of CdCu3Ti4O[Formula: see text] ceramics was systematically investigated. Upon Al[Formula: see text]/Ta[Formula: see text] co-doping, the dielectric properties of CdCu3(Al[Formula: see text]Ta[Formula: see text]Ti[Formula: see text]O[Formula: see text] were significantly enhanced. Particularly, the CdCu3(Al[Formula: see text]Ta[Formula: see text]Ti[Formula: see text]O[Formula: see text] material displays a decent dielectric property, where dielectric constants ([Formula: see text]), loss tangent (tan [Formula: see text]) at a test frequency of 1[Formula: see text]kHz are able to satisfy the application temperature requirement of the Y6R capacitor. Surprisingly, the refined grains resulting from Al[Formula: see text]/Ta[Formula: see text] co-doping lead to heightened resistance at grain boundaries, which is closely associated with enhanced dielectric properties. Meanwhile, the giant dielectric property of the materials can be attributed to the effect of the internal barrier layer capacitance. The obtained results are expected to provide a new idea for obtaining high dielectric constant and low loss tangent in CdCTO-based materials and promote the practical application of such materials.

Surface Engineering Enhances Vanadium Carbide MXene-Based Nanoplatform Triggered by NIR-II for Cancer Theranostics.

Despite the advantages of high tissue penetration depth, selectivity, and non-invasiveness of photothermal therapy for cancer treatment, developing NIR-II photothermal agents with desirable photothermal performance and advanced theranostics ability remains a key challenge. Herein, a universal surface modification strategy is proposed to effectively improve the photothermal performance of vanadium carbide MXene nanosheets (L-V2C) with the removal of surface impurity ions and generation of mesopores. Subsequently, MnOx coating capable of T1-weighted magnetic resonance imaging can be in situ formed through surface redox reaction on L-V2C, and then, stable nanoplatforms (LVM-PEG) under physiological conditions can be obtained after further PEGylation. In the tumor microenvironment irradiated by NIR-II laser, multivalent Mn ions released from LVM-PEG, as a reversible electronic station, can consume the overexpression of glutathione and catalyze a Fenton-like reaction to produce ·OH, resulting in synchronous cellular oxidative damage. Efficient synergistic therapy promotes immunogenic cell death, improving tumor-related immune microenvironment and immunomodulation, and thus, LVM-PEG can demonstrate high accuracy and excellent anticancer efficiency guided by multimodal imaging. As a result, this study provides a new approach for the customization of 2D surface strategies and the study of synergistic therapy mechanisms, highlighting the application of MXene-based materials in the biomedical field.

Developing a Multitasking Augmented Reality Application for Theatrical and Cultural Content

Implementing digital technologies, such as augmented reality and 3D modeling, to various cultural sectors is an ongoing procedure, especially favorable after the COVID-19 pandemic. Even though such technologies are common to museums, galleries and archaeological places all over the world, little research or practical cases have been developed when it comes to theaters and theatrical costumes. The proposed research article describes the methodology of both reference material collection and application development, while an analysis of functions and aesthetic results are described, especially when it comes to 3D modeling. This paper’s aim is to reveal that theatrical operations (as part of the cultural sector) as well as structured parts (such as acts, performances and costumes) can be preserved and served to larger audiences via technological means, such as an augmented reality application.

Developing a Multitasking Augmented Reality Application for Theatrical and Cultural Content

Implementing digital technologies, such as augmented reality and 3D modeling, to various cultural sectors is an ongoing procedure, especially favorable after the COVID-19 pandemic. Even though such technologies are common to museums, galleries and archaeological places all over the world, little research or practical cases have been developed when it comes to theaters and theatrical costumes. The proposed research article describes the methodology of both reference material collection and application development, while an analysis of functions and aesthetic results are described, especially when it comes to 3D modeling. This paper’s aim is to reveal that theatrical operations (as part of the cultural sector) as well as structured parts (such as acts, performances and costumes) can be preserved and served to larger audiences via technological means, such as an augmented reality application.

Surface Engineering of the Mechanical Properties of Molecular Crystals via an Atomistic Model for Computing the Facet Stress Response of Solids.

Invited for the cover of this issue are Mubarak Almehairbi, Vikram C. Joshi, Changquan Calvin Sun and Sharmarke Mohamed. The image depicts the digital exploration of the mechanical properties of crystals on specific facets that may be of interest for materials applications by "dialing-in" their stress response. Read the full text of the article at 10.1002/chem.202400779.

Organic Electro-Optic Materials with High Electro-Optic Coefficients and Strong Stability.

The preparation of high-performance electro-optical materials is one of the key factors determining the application of optoelectronic communication technology such as 5G communication, radar detection, terahertz, and electro-optic modulators. Organic electro-optic materials have the advantage of a high electro-optic coefficient (~1000 pm/V) and could allow the utilization of photonic devices for the chip-scale integration of electronics and photonics, as compared to inorganic electro-optic materials. However, the application of organic nonlinear optical materials to commercial electro-optic modulators and other fields is also facing technical bottlenecks. Obtaining an organic electro-optic chromophore with a large electro-optic coefficient (r33 value), thermal stability, and long-term stability is still a difficulty in the industry. This brief review summarizes recent great progress and the strategies to obtain high-performance OEO materials with a high electro-optic coefficient and/or strong long-term stability. The configuration of D-π-A structure, the types of materials, and the effects of molecular engineering on the electro-optical coefficient and glass transition temperature of chromophores were summarized in detail. The difficulties and future development trends in the practical application of organic electro-optic materials was also discussed.

Three-birds-with-one-stone: An eco-friendly and renewable humic acid-derived material application strategy for macrolide antibiotic detection and multifunctional composite film preparation

This research proposes a simple and novel strategy for the green detection of antibiotics along with the reduction of microplastic and humic acid (HA) hazards. The entire process is based on a single-step solvent-sieving method to separate HA into insoluble (IHA) and soluble (SHA) components, subsequently recombining and designing the application according to the original characteristics of selected fractions in accordance with the zero-waste principle. IHA was applied as a dispersive solid phase extraction (DSPE) sorbent without chemical modification for the enrichment of trace MACs in complex biological matrices. The recovery of MACs was 74.06–100.84 % in the range of 2.5–1000 μg∙kg−1. Furthermore, SHA could be combined with biodegradable polyvinyl alcohol (PVA) to prepare multifunctional composite films. SHA endows the PVA film with favorable mechanical properties, excellent UV shielding as well as oxidation resistance performance. Compared with pure PVA, the tensile strength, toughness, antioxidant and UV-protection properties were increased to 157.3 Mpa, 258.6 MJ·m−3, 78.6 % and 60 % respectively. This study achieved a green and economically valuable utilization of all components of waste HA, introduced a novel approach for monitoring and controlling harmful substances and reducing white pollution. This has significant implications for promoting sustainable development and recovering valuable resources.

Enhanced Ferromagnetism and Tunable Magnetic Anisotropy in a van der Waals Ferromagnet.

2D van der Waals (vdW) magnets have recently emerged as a promising material system for spintronic device innovations due to their intriguing phenomena in the reduced dimension and simple integration of magnetic heterostructures without the restriction of lattice matching. However, it is still challenging to realize Curie temperature far above room temperature and controllable magnetic anisotropy for spintronics application in 2D vdW magnetic materials. In this work, the pressure-tuned dome-like ferromagnetic-paramagnetic phase diagram in an iron-based 2D layered ferromagnet Fe3GaTe2 is reported. Continuously tunable magnetic anisotropy from out-of-plane to in-plane direction is achieved via the application of pressure. Such behavior is attributed to the competition between intralayer and interlayer exchange interactions and enhanced DOS near the Fermi level. The study presents the prominent properties of pressure-engineered 2D ferromagnetic materials, which can be used in the next-generation spintronic devices.

Degradation Behavior of Medical MgZZC-1 in Various Simulated Body Fluids.

Magnesium-based biodegradable metal bone implants exhibit superior mechanical properties compared to biodegradable polymers for orthopedic and cardiovascular stents. In this study, MgZZC-x (x = 1, 1.2) alloys were screened by in vitro biocompatibility tests in three simulated body fluids under nontoxic conditions. The MgZZC-1 alloys with better biocompatibility were selected to predict the days required for complete degradation. The evolution of degradation products was analyzed, and the mechanism of formation of the product film was inferred. A degradation kinetic model was established to investigate the effect of MEM components on the degradation of the alloys. The results demonstrate that the proteins in MEM can greatly retard the degradation progress by attaching to the surface of MgZZC-1 alloys, which are predicted to degrade completely within 341 days. The carbonate and phosphate buffers were adjusted to pH in MEM solution, delaying the degradation of magnesium alloys. This process in MEM more accurately reflects the actual degradation in the body and is superior to that in Hanks and SBF solutions. This study will promote the application of biodegradable materials in clinical medicine.

Auxetic Biomedical Metamaterials for Orthopedic Surgery Applications: A Comprehensive Review.

Poisson's ratio in auxetic materials shifts from typically positive to negative, causing lateral expansion during axial tension. This scale-independent characteristic, originating from tailored architectures, exhibits specific physical properties, including energy adsorption, shear resistance, and fracture resistance. These metamaterials demonstrate exotic mechanical properties with potential applications in several engineering fields, but biomedical applications seem to be one of the most relevant, with an increasing number of articles published in recent years, which present opportunities ranging from cellular repair to organ reconstruction with outstanding mechanical performance, mechanical conduction, and biological activity compared with traditional biomedical metamaterials. Therefore, focusing on understanding the potential of these structures and promoting theoretical and experimental investigations into the benefits of their unique mechanical properties is necessary for achieving high-performance biomedical applications. Considering the demand for advanced biomaterial implants in surgical technology and the profound advancement of additive manufacturing technology that are particularly relevant to fabricating complex and customizable auxetic mechanical metamaterials, this review focuses on the fundamental geometric configuration and unique physical properties of negative Poisson's ratio materials, then categorizes and summarizes auxetic material applications across some surgical departments, revealing efficacy in joint surgery, spinal surgery, trauma surgery, and sports medicine contexts. Additionally, it emphasizes the substantial potential of auxetic materials as innovative biomedical solutions in orthopedics and demonstrates the significant potential for comprehensive surgical application in the future.

Electrochemiluminescence of Ultrasmall Silica Nanoparticles from Size Modulation and Multipath Surface State Adjustment for Ultrasensitive HIV-DNA Fragment Detection.

Here, ultrasmall SiO2 nanoparticles (u-SiO2 NPs, <5 nm) with obvious electrochemiluminescence (ECL) phenomenon, which was absent for conventional silica nanoparticles (c-SiO2 NPs), were reported. In a finite ultrasmall volume, the u-SiO2 NPs exhibited increasing ground state energy and higher optical absorption strength due to the electron-hole confinement model and favored catalyzing the reaction through the rapid diffusion of bulk charge, resulting in apparent ECL emission. Then, Zn2+-induced u-SiO2 nanoaggregates (Zn/u-SiO2-Ov nAGG) were synthesized and exhibited improved ECL performance via multipath surface state adjustment of u-SiO2 from several aspects, including aggregation-induced ECL, the generation of oxygen vacancy (Ov), and more positive surface charge. In addition, an ECL biosensor was constructed for ultrasensitive human immunodeficiency virus-related deoxyribonucleic acid detection from 100 aM to 1 nM with a low limit of 50.48 aM, combining the ECL luminescence of Zn/u-SiO2-Ov nAGG with three-dimensional DNA nanomachine-mediated multioutput amplification for enhanced accuracy and sensitivity compared to the single-output method. Therefore, exploring the ECL of ultrasmall nanoparticles via the adjustment of size and surface state provided a valuable indication to a wider investigation and application of novel ECL materials for clinical diagnostic.

Multi-physical channels response in a novel layered perovskite: (trans-4-methylcyclohexylammonium)2[CuCl4]

With the continuous development of society, the demand for multi-physical channel responsive materials continues to increase, and it is urgent to develop multi-channel responsive materials with excellent properties. Here, in this work, we reported a novel two-dimensional (2D) organic–inorganic hybrid perovskite, (trans-4-methylcyclohexylammonium)2[CuCl4] (1), with responsive multi-physical channels. 1 experienced a structural phase transition with switchable thermochromism and dielectric response, which has great potential in the application of responsive materials. Under thermal stimulation, crystal 1 displays a reversible color variation between green and yellow. Crystal structure determination reveals that the distortion of inorganic layers plays a predominant role in the thermochromism during the phase transition process. This finding presents a compelling avenue for developing multi-physical channel responsive materials and contributes valuable insights to the exploration of two-dimensional lead-free perovskites for applications in intelligent window technology.

Light-driven C–H activation mediated by 2D transition metal dichalcogenides

C–H bond activation enables the facile synthesis of new chemicals. While C–H activation in short-chain alkanes has been widely investigated, it remains largely unexplored for long-chain organic molecules. Here, we report light-driven C–H activation in complex organic materials mediated by 2D transition metal dichalcogenides (TMDCs) and the resultant solid-state synthesis of luminescent carbon dots in a spatially-resolved fashion. We unravel the efficient H adsorption and a lowered energy barrier of C–C coupling mediated by 2D TMDCs to promote C–H activation and carbon dots synthesis. Our results shed light on 2D materials for C–H activation in organic compounds for applications in organic chemistry, environmental remediation, and photonic materials.

Lead Bromide Complex in Tri-n-octylphosphine Oxide Matrix with Bright Photoluminance and Exceptional Thermoplasticity.

Metal halide materials have recently drawn increasing research interest for their excellent opto-electronic properties and structural diversity, but their resulting rigid structures render them brittle and poor formability during manufacturing. Here we demonstrate a thermoplastic luminant hybrid lead halide solid by integrating lead bromide complex into tri-n-octylphosphine oxide (TOPO) matrix. The construction of the hybrid materials can be achieved by a simple dissolution process, in which TOPO molecules act as the solvents and ligands to yield the monodispersed clusters. The combination of these functional units enables the near-room-temperature melt-processing of the materials into targeted geometry by simple molding or printing techniques, which offer possibilities for fluorescent writing inks with outstanding self-healing capacity to physical damage. The intermarriage between metal halide clusters with functional molecules expands the range of practical applications for hybrid metal halide materials.

CNT Composite β-MnO2 with Fiber Cable Shape as Cathode Materials for Aqueous Zinc-Ion Batteries.

Rechargeable aqueous zinc-ion batteries (AZIBs) have developed into one of the most attractive materials for large-scale energy storage owing to their advantages such as high energy density, low cost, and environmental friendliness. Nevertheless, the sluggish diffusion kinetics and inherent impoverished conductivity affect their practical application. Herein, the β-MnO2 composited with carbon nanotubes (CNT@M) is prepared through a simple hydrothermal approach as a high-performance cathode for AZIBs. The CNT@M electrode exhibits excellent cycling stability, in which the maximum specific discharge capacity is 259 mA h g-1 at 3 A g-1, and there is still 220 mA h g-1 after 2000 cycles. The specific capacity is obviously better than that of β-MnO2 (32 mA h g-1 after 2000 cycles). The outstanding electrochemical performance of the battery is inseparable from the structural framework of CNT and inherent high conductivity. Furthermore, CNT@M can form a complex conductive network based on CNTs to provide excellent ion diffusion and charge transfer. Therefore, the active material can maintain a long-term cycle and achieve stable capacity retention. This research provides a reasonable solution for the reliable conception of Mn-based electrodes and indicates its potential application in high-performance AZIB cathode materials.

Energy Transfer‐Assisted Color Conversion of Persistent Mechanoluminescence in RhB@SiO2/SrAl2O4:Eu,Dy System for Multilevel Information Encryption

AbstractPersistent mechanoluminescence (PML) is highly desirable for its ability to overcome transient‐emitting behavior, but its applications are hindered by the limited emission wavelengths. Herein, a universal chemical interlinkage‐assisted efficient energy transfer (ET) strategy is introduced to achieve color conversion from green to red in traditional PML materials. A straightforward chemical route to create the RhB@SiO2/SAOED system is established via covalent chemical interlinkage by depositing mesoporous silica‐encapsulated Rhodamine B (RhB) nanoparticles (RhB@SiO2) onto SrAl2O4:Eu, Dy (SAOED) particles. The resulting system exhibits a high ET efficiency of 53.5%. The multicolor PML of the RhB@SiO2/SAOED system remains visible to the naked eye for exceeding 28 s after mechanical stimulation. With this unique PML behavior, the RhB@SiO2/SAOED system demonstrates the potential applications ranging from visualized reading activities to multi‐mode anticounterfeiting. This universal PML color‐conversion strategy provides a new approach to high‐performance mechanical light energy‐conversion systems and may further inspire more diverse functional applications of classical PML materials.