Application Of Materials Research Articles

Binary-amplifying electrochemiluminescence sensor for sensitive assay of catechol and luteolin based on HKUST-1 derived CuO nanoneedles as a novel luminophore

Herein, a highly novel and effective electrochemiluminescence (ECL) sensor based on metal-organic framework (MOF, HKUST-1) derived CuO nanoneedles (HKUST-1 derived CuO NNs), gold nanoparticles (AuNPs) and TiO2 was developed for ultrasensitive detection of catechol and luteolin. The HKUST-1 derived CuO NNs were employed as luminophore for the first time, which were successfully fabricated by using HKUST-1 as precursor. The results revealed that the HKUST-1 derived CuO NNs exhibit excellent ECL activity ascribed to its abundant active site and the high specific surface area, thus obviously promoting the separation and transfer of charge and further improving the current density of ECL sensor. To binary-amplify the signal of the ECL sensor, the AuNPs and TiO2 nano-materials with good biocompatibility, great electron transport efficiency and high catalytic activity were used as co-reaction accelerators in the ECL process. Dependent on the above brilliant strategy, the proposed ECL sensor achieved wide linear ranges from 3 × 10−9 – 1 × 10−4 M for catechol and 1 × 10−8 – 2 × 10−4 M for luteolin, with the detection limits of 1.5 × 10−9 M for catechol and 5.3 × 10−9 M for luteolin, respectively. Furthermore, the ECL sensor exhibited outstanding selectivity, repeatability, stability and obtained great feedback on determination of catechol and luteolin in actual samples. The method not only filled a gap in the ECL application of MOF-derived materials but also provided a novel sight for design other highly efficient luminescent materials.

Research Progress of Chitosan-based Multifunctional Nanoparticles in Cancer Targeted Therapy.

Conventional tumor therapeutic modalities, such as radiotherapy, chemotherapy, and surgery, involve low tumor inhibition efficiency, non-targeted drug delivery, and side effects. The development of novel and practical nano-drug delivery systems (DDSs) for targeted tumor therapy has become particularly important. Among various bioactive nanoparticles, chitosan is considered a suitable candidate for drug delivery due to its non-toxicity, good biocompatibility, and biodegradability. The amino and hydroxyl groups of chitosan endow it with the diverse function of chemical modification, thereby improving its physical and biological properties to meet the requirements of advanced biomedical applications. Therefore, it is necessary to review the property and applications of chitosan-based materials in biomedicine. In this review, the characteristics of chitosan related to its applications are first introduced, and then the preparation and modification of chitosan-based nanoparticles, including the function tailoring of chitosan-modified nanoparticles, are demonstrated and discussed. Finally, the opportunities and challenges of chitosan-based nanomaterials in this emerging field are proposed from the perspective of the rational and systematic design for the biomedicine field.

A Review on the Recent Progress of Layered Double Hydroxides (LDHs)-based Catalysts for Heterocyclic Synthesis

Abstract: Over the past decade, heterocyclic compounds and their derivatives have emerged as promising substances with potential pharmacological applications due to their interesting biological properties. The significance of heterocyclic compounds in drug discovery and development is evident from the fact that a majority of drugs in the pharmaceutical market incorporate heterocyclic compounds as active substances or ingredients. Various synthetic methods and advancements have been devised to prepare these heterocyclic compounds using diverse catalysts under mild conditions. Layered double hydroxides (LDHs)-based materials have gained considerable attention across different fields, and their usability can be significantly enhanced via the selection of metal cations, their molar ratios, surface complexation, and intercalation modifications. The synthesis and application of LDH-based materials as catalysts have garnered increasing interest due to their exceptional properties. Moreover, LDH-based materials have found extensive use as heterogeneous catalysts in the synthesis of numerous heterocyclic compounds. This review presents the latest developments in the catalytic application of LDH-based materials as solid heterogeneous catalysts in the synthesis of heterocyclic compounds, covering literature published from 2018 to 2023.

Preparation method and industrialization of Ta-based ultra high temperature ceramic Tujia jar tea baking jar materials

The production materials of traditional Tujia jar tea often face problems such as poor high-temperature performance and poor durability. To improve the temperature resistance and durability of tea baking utensils, this study proposes a new type of TaC ultra-high temperature ceramic. TaC ceramics with excellent performance were prepared through powder metallurgy technology, including high-energy ball milling to ensure uniform mixing, followed by compression molding and high-temperature sintering. The test results demonstrated excellent mechanical properties, with a maximum depth of 948.67 nm and a contact depth of 954.45 nm, proving outstanding compressive and wear resistance. The hardness reached 21.4±0.5 Gpa, and the elastic modulus was 397.2±8.7 Gpa, both of which indicate its stability under high loads. In addition, the fracture toughness was 2.8±0.2 Mpa*m1/2. At a high temperature environment of 1000 °C, the oxidation rate constant of TaC ceramics was only 0.183 mg2 *cm−4 *h, which demonstrates its excellent high-temperature stability. The development of this TaC ceramic not only strengthened the traditional production process of Tujia teapots and tea roasting teapots, thereby improving the product’s service life, but also holds potential for other industrial applications that demand ultra-high temperature stability. These contributions provide new directions for the high-temperature application of ceramic materials and bring tangible economic and technological value to related industries.

Thermal analysis for SWCNTs and MWCTs due to coaxially stretchable disks with applications of viscous dissipation and thermal radiation: Artificial neural network analysis

Owing to exclusive thermal prospective of nanoparticles, diverse applications of such materials have been reported in heat transfer systems. The carbon nanotube (CNTs) is the modified class of nanoparticles which is preserve more stable thermal properties. The decomposition of CNTs with base materials offer special applications in enhancing thermal efficiency of energy systems, nuclear processes, sensors, diagnostic imaging etc. Following to such motivations in mind, the objective of current work is to present artificial neural network analysis for heat transfer problem due to suspension of carbon nanotubes-based nanofluid. Both single-walled and multi-walled carbon nanotubes are utilized to analyse the thermal impact of water base fluid. The source of flow is coaxially stretchable disks. The applications of porous medium phenomenon are reported to inspect the inertial effects. The problem is further updated by utilizing the radiative phenomenon, external heat generation and dissipation and slip constraints. The transport system is expressed via coupled nonlinear equations which are tackled via numerical computations.

Spherical Fe3O4 morphology modulation for enhancing infrared emissivity and radiant heat dissipation

Radiant heat dissipation has emerged as a critical technique for effective thermal management, offering energy efficiency, cost-effectiveness, and adaptability to various shapes while promoting environmental sustainability. However, the intricate relationship between material structures and emissivity remains inadequately understood. This study primarily utilizes a straightforward and economical solvothermal method to regulate the synthesis of Fe3O4 ferrite, exploring its structural relationship with infrared radiation performance. By adjusting the solvent ratio of ethylene glycol and diethylene glycol in the solvothermal system, we successfully synthesized uniformly dispersed Fe3O4 nanospheres ranging from 10 to 800 nm. Notably, our research revealed a positive correlation between infrared emissivity and the particle size. Submicron hollow spheres with a size of 800 nm exhibit an exceptionally high emissivity of 0.992 within the 8∼13 μm wavelength range. Morphological and size variations induced alterations in lattice strain, oxygen vacancies, and phonon lifetimes, which consequently influencing the lattice vibration absorption and infrared emissivity. Moreover, the device surface with a composite coating formed by combining 15wt% Fe3O4 particles with organic matter, achieves a temperature difference of 17.6 °C under a 4 W input power condition compared to blank device. This finding contributes to further revealing the process of material radiative heat dissipation, driving the application of high-emissivity materials for heat dissipation in high-power electronic devices.

Exploring the Ne Bis in Idem principle: Material scope and application in EU law

This article examines and analyses the application of the ne bis in idem principle based on a final verdict of acquittal or conviction by a competent court where the cases have already been concluded by a final decision. It examines the principle concerning Article 4 of Protocol No. 7 of the European Convention on Human Rights (Article 4P7 ECHR), Article 50 of the Charter of Fundamental Rights of the European Union and its implication under Articles 54 to 58 of the Convention Implementing the Schengen Agreement (CISA). By reviewing previous literature, case law and fact sheets of the Court of Justice on the Ne bis in idem principle, the paper analyses the material scope of application of the principle and highlights the multifaceted significance of the Ne Bis in idem principle in criminal proceedings and the harmonisation of legal practices within the European Union. It reaffirms the principle's foundational importance in fostering fairness, legal certainty, and the protection of fundamental rights across a wide array of legal contexts. It elaborates and provides an interpretative analysis of the principle on the associated jurisprudence of the Court of Justice of the European Union (CJEU) and the European Court of Human Rights (ECtHR). The paper also shows that the ne bis in idem principle serves as a common ground for judicial cooperation in criminal matters and mutual recognition of the Council Framework Decision 2002/584/JHA concerning the European Arrest Warrant (‘EAW FD’) and Directive 2014/41/EU regarding the European Investigation Order in criminal matters.

Purely ionically bonded cation paving the way to ultralow thermal conductivity and large thermoelectric figure of merit in Ruddlesden–Popper perovskite Cs2SnI2Br2

Lower dimensional materials have gained quite a bit of popularity in the last few decades. Perovskite materials have been studied extensively for their photovoltaic properties. But for large scale application of photovoltaic materials, the thermal properties need to be studied. In this work, using first principles calculations, we have studied the thermal conductivity and thermoelectric performance of quasi two-dimensional (2D) Ruddlesden–Popper phase of perovskite, Cs2SnI2Br2. The Cs atoms are found to be ionically bonded to the halogens leading to low elastic constants and hence give rise to weak bonding. The large anharmonicity in this material causes the lattice thermal conductivity to be ultralow having a value of 0.30 W·m−1·K−1 at 300 K and therefore the thermoelectric figure of merit has been found to be high with a maximum value of 2.08 at 600 K. This lead-free 2D perovskite can be the precursor to a wide variety of similar materials with ultralow thermal conductivity.

Novel Aluminum Alloy Tailored for Additive Manufacturing: Structural Characterization and Qualification Perspectives

The recent advances achieved in additive manufacturing (AM) technology demonstrate the potential to realize customized metal components, ensuring weight reduction opportunities. These benefits make AM attractive for high-cost aerospace applications, especially where high geometric complexity is required. In the context of an EU research scenario, the H2020 MANUELA (Additive Manufacturing Using Metal Pilot Line) project promotes the development of new technologies for design optimization by enabling the application of novel materials in AM. This paper illustrates recent advances in a new aluminum alloy (Al-HS1) with high strength emphasizing all of the characterization steps at the coupon level. This material has been employed in the re-engineering of a conventional hydraulic manifold using a powder bed fusion-laser beam (PBF-LB) process. Both the simulations and structural tests allowed for proving its compliance and technological maturity with industrial standards and applicable airworthiness requirements.

Applications of optical control materials based on localized surface plasmon resonance effect in smart windows

Applications of optical control materials based on localized surface plasmon resonance effect in smart windows

Narrowband room temperature phosphorescence of closed-loop molecules through the multiple resonance effect

Luminescent materials with narrowband emission show great potential for diverse applications in optoelectronics. Purely organic phosphors with room-temperature phosphorescence (RTP) have made significant success in rationally manipulating quantum efficiency, lifetimes, and colour gamut in the past years, but there is limited attention on the purity of the RTP colours. Herein we report a series of closed-loop molecules with narrowband phosphorescence by multiple resonance effect, which significantly improves the colour purity of RTP. Phosphors show narrowband phosphorescence with full width at half maxima (FWHM) of 30 nm after doping into a rigid benzophenone matrix under ambient conditions, of which the RTP efficiency reaches 51.8%. At 77 K, the FWHM of phosphorescence is only 11 nm. Meanwhile, the colour of narrowband RTP can be tuned from sky blue to green with the modification of methyl groups. Additionally, the potential applications in X-ray imaging and display are demonstrated. This work not only outlines a design principle for developing narrowband RTP materials but also makes a major step forward extending the potential applications of narrowband luminescent materials in optoelectronics.

Crystal structure, stability, and transport properties of Li2BeAl and Li2BeGa Heusler alloys: a DFT study

In this study, the structural, elastic, electronic, and thermoelectric properties of full Li2BeAl and Li2BeGa Heusler alloys were explored using density functional and the Boltzmann transport theories. The GGA and HSE approximations have been used for the exchange–correlation potential. Results indicated that these two compounds are more energetically stable in the inverse Heusler structure. Additionally, both Li2BeAl and Li2BeGa Heusler alloys were found to be mechanically stable due to the positive values of the elastic constants. Also, the high values of the Young's modulus indicate that these compounds are stiff and exhibit a semi-metallic nature. The band gaps were determined to be 0.13 eV and − 0.22 eV for Li2BeAl and Li2BeGa alloys, respectively, using the GGA approximation. By employing the HSE hybrid functional, however, the band gap for Li2BeAl increased to 0.26 eV, and for Li2BeGa, it decreased to − 0.16 eV. Regarding thermoelectric properties, Seebeck coefficient, electrical conductivity, electronic and lattice thermal conductivities, power factor, and the figure of merit have been calculated for both Li2BeAl and Li2BeGa Heusler alloys at different temperatures. Seebeck coefficient in both alloys decreases with increasing the temperature and has the highest value at 300 K. Thermal conductivity and electrical conductivity increase with increasing the temperature, which confirms the intermetallic behavior of the Heusler alloys. The results obtained for both alloys show that n-type doping has better thermoelectric properties than p-type doping. The maximum value of the figure of merit (ZT) was obtained for n-type doping, which was 1.43 at 660 K for Li2BeAl and 0.39 at 1000 K for Li2BeGa alloy. The high values of ZT especially for electron-dopped Li2BeAl suggest the great potential of this material for use in thermoelectric devices. This study suggests that the proposed materials have potential applications in spintronic devices and thermoelectric materials due to their intermetallic character and effective thermoelectric coefficients.

Calcium Zirconate: Methods of Synthesis and Applications of Ceramic and Refractory Materials Based Thereon — A Review. Part 2. Applications of Ceramic and Refractory Materials Based on Calcium Zirconate

Calcium Zirconate: Methods of Synthesis and Applications of Ceramic and Refractory Materials Based Thereon — A Review. Part 2. Applications of Ceramic and Refractory Materials Based on Calcium Zirconate

Agriculture 4.0: Polymer Hydrogels as Delivery Agents of Active Ingredients

The evolution from conventional to modern agricultural practices, characterized by Agriculture 4.0 principles such as the application of innovative materials, smart water, and nutrition management, addresses the present-day challenges of food supply. In this context, polymer hydrogels have become a promising material for enhancing agricultural productivity due to their ability to retain and then release water, which can help alleviate the need for frequent irrigation in dryland environments. Furthermore, the controlled release of fertilizers by the hydrogels decreases chemical overdosing risks and the environmental impact associated with the use of agrochemicals. The potential of polymer hydrogels in sustainable agriculture and farming and their impact on soil quality is revealed by their ability to deliver nutritional and protective active ingredients. Thus, the impact of hydrogels on plant growth, development, and yield was discussed. The question of which hydrogels are more suitable for agriculture—natural or synthetic—is debatable, as both have their merits and drawbacks. An analysis of polymer hydrogel life cycles in terms of their initial material has shown the advantage of bio-based hydrogels, such as cellulose, lignin, starch, alginate, chitosan, and their derivatives and hybrids, aligning with sustainable practices and reducing dependence on non-renewable resources.

Changes in Current Transport and Regulation of the Microstructure of Graphene/Polyimide Films under Joule Heating Treatment

The excellent electrical properties of graphene have received widespread attention. However, the difficulty of electron transfer between layers still restricts the application of graphene composite materials to a large extent. Therefore, in this study, graphene/polyimide films were subjected to a Joule heating treatment to improve the electrical conductivity of the film by ~76.85%. After multiple Joule thermal cycle treatments, the conductivity of the graphene/polyimide film still gradually increased, but the increase in amplitude tended to slow down. Finally, after eight Joule heat treatments, the conductivity of the graphene/polyimide film was improved by ~93.94%. The Joule heating treatment caused the polyimide to undergo atomic rearrangement near the interface bonded to the graphene, forming a new crystalline phase favourable for electron transport with graphene as a template. Accordingly, a model of the bilayer capacitive microstructure of graphene/polyimide was proposed. The experiment suggests that the Joule heating treatment can effectively reduce the distance between graphene electrode plates in the bilayer capacitive micro-nanostructures of graphene/polyimide and greatly increases the number of charge carriers on the electrode plates. The TEM and WAXS characterisation results imply atomic structure changes at the graphene/polyimide bonding interface.

Core–Double-Shell TiO2@Fe3O4@C Microspheres with Enhanced Cycling Performance as Anode Materials for Lithium-Ion Batteries

Due to the volume expansion effect during charge and discharge processes, the application of transition metal oxide anode materials in lithium-ion batteries is limited. Composite materials and carbon coating are often considered feasible improvement methods. In this study, three types of TiO2@Fe3O4@C microspheres with a core–double-shell structure, namely TFCS (TiO2@Fe3O4@C with 0.0119 g PVP), TFCM (TiO2@Fe3O4@C with 0.0238 g PVP), and TFCL (TiO2@Fe3O4@C with 0.0476 g PVP), were prepared using PVP (polyvinylpyrrolidone) as the carbon source through homogeneous precipitation and high-temperature carbonization methods. After 500 cycles at a current density of 2 C, the specific capacities of these three microspheres are all higher than that of TiO2@Fe2O3 with significantly improved cycling stability. Among them, TFCM exhibits the highest specific capacity of 328.3 mAh·g−1, which was attributed to the amorphous carbon layer effectively mitigating the capacity decay caused by the volume expansion of iron oxide during charge and discharge processes. Additionally, the carbon coating layer enhances the electrical conductivity of the TiO2@Fe3O4@C materials, thereby improving their rate performance. Within the range of 100 to 1600 mA·g−1, the capacity retention rates for TiO2@Fe2O3, TFCS, TFCM, and TFCL are 27.2%, 35.2%, 35.9%, and 36.9%, respectively. This study provides insights into the development of new lithium-ion battery anode materials based on Ti and Fe oxides with the abundance and environmental friendliness of iron, titanium, and carbon resources in TiO2@Fe3O4@C microsphere anode materials, making this strategy potentially applicable.

Characteristics of Insulating Panels Realised from Coconut Palm Fibres for Low-Temperature Thermal Insulation

In recent years, there has been growing interest in issues relating to pollution and energy consumption, and the resulting regulations have led the construction sector to focus on thermal insulation. The application of bio-based insulation materials can help to minimise the environmental impact of buildings by reducing energy demand both during construction and over the lifetime of the building. Agroforestry biomass plays an interesting role, as its use can reduce greenhouse gas emissions. The aim of this work is to produce insulating panels from agroforestry by-products for low-temperature thermal insulation applications. The insulating panels in this study are produced from coconut palm fibres and their thermophysical properties are determined. They were produced using a human-motricity press and the temperature rise was controlled using the hot-tape method. Characteristics such as calorific value and modelling of temperature rise as a function of time to calculate thermal conductivity, thermal effusivity and diffusivity were determined. The calorific value varies from 3668.0 to 4135.0 and from 3742.0 to 4186.0 cal.g-1 when the moisture content is 11.28 and 10.61%, respectively. The thermal conductivity, effusivity and thermal diffusivity are 0.4 W.m-1.K-1, 760.30 J.m-2.°C-1.s-1/2 and 2.73.10-7 m.s-1, respectively. In view of these results, coconut fibre represents a potential precursor to produce insulating panels.

Coarse-grained force field for ZIF-8: A study on adsorption, diffusion, and structural properties.

Metal-organic frameworks (MOFs) are revolutionizing a spectrum of industries, from groundbreaking gas storage solutions to transformative biological system applications. The intricate architecture of these materials necessitates the use of advanced computational techniques for a comprehensive understanding of their molecular structure and prediction of their physical properties. Coarse-grained (CG) simulations shine a spotlight on the often-neglected influences of defects, pressure effects, and spatial disorders on the performance of MOFs. These simulations are not just beneficial but indispensable for high-demand applications, such as mixed matrix membranes and intricate biological system interfaces. In this work, we propose an optimized CG force field tailored for ZIF-8. Our work provides a deep dive into sorption isotherms and diffusion coefficients of small molecules. We demonstrate the structural dynamics of ZIF-8, particularly how it responds to pressurization, which affects its crystal structure and leads to local changes in aperture size and area. Emphasizing the game-changing potential of CG simulations, we explore the characteristics of amorphization in ZIF-8. Through computational exploration, we aim to bridge the knowledge gap, enhancing the potential applications of nanoporous materials for various applications.

Advancements in 3D printing materials: A comparative analysis of performance and applications

3D printing has rapidly evolved and matured in recent years, with a key factor being the improvement in printing materials. This paper compares the performance and applications of various 3D printing materials, including plastics, metals, ceramics, and biomaterials. Plastics remain the most widely used material due to their low cost and ease of printing, while metals are gaining popularity due to their superior mechanical properties. However, recent advancements in ceramic and biomaterials have opened up new possibilities for 3D printing in industries such as aerospace, healthcare, and electronics. The comparative analysis provides insights into the strengths and limitations of each material, and how they can be optimized for specific applications. With continuous developments in 3D printing technology and materials, the potential for this technology to revolutionize manufacturing and other industries is promising.

Comparison of calcium carbonate production by bacterial isolates from recycled aggregates.

The new technology of microbially induced calcium carbonate precipitation (MICP) has been applied in construction materials as a strategy to enhance their properties. In pursuit of solutions that are more localized and tailored to the study's target, this work focused on isolating and selecting bacteria capable of producing CaCO3 for posterior application in concrete aggregates. First, eleven bacterial isolates were obtained from aggregates and identified as genera Bacillus, Lysinibacillus, Exiguobacterium, and Micrococcus. Then, the strains were compared based on the quantity and nature of calcium carbonate they produced using thermogravimetric analysis, X-ray diffraction, and scanning electron microscopy with energy dispersive spectroscopy. Bacillus sp. dominated the cultured isolates and, along with Lysinibacillus sp., exhibited the highest CaCO3 conversion (up to 80%). On the other hand, Exiguobacterium and Micrococcus genera showed the poor ability to MICP (21.3 and 20.3%, respectively). Calcite and vaterite were the dominant carbonate polymorphs, with varying proportions. Concrete aggregates have proven to be a source of microorganisms capable of producing stable calcium carbonates with a high conversion rate. This indicates the feasibility of using microorganisms derived from local sources for application in construction materials as a sustainable way to enhance their characteristics.