Bone Tissue Engineering Applications Research Articles

Decellularized Extracellular Matrix Scaffolds: Recent Advances and Emerging Strategies in Bone Tissue Engineering.

Bone tissue engineering (BTE) is a complex biological process involving the repair of bone tissue with proper neuronal network and vasculature as well as bone surrounding soft tissue. Synthetic biomaterials used for BTE should be biocompatible, support bone tissue regeneration, and eventually be degraded in situ and replaced with the newly generated bone tissue. Recently, various forms of bone graft materials such as hydrogel, nanofiber scaffolds, and 3D printed composite scaffolds have been developed for BTE application. Decellularized extracellular matrix (DECM), a kind of natural biological material obtained from specific tissues and organs, has certain advantages over synthetic and exogenous biomaterial-derived bone grafts. Moreover, DECM can be developed from a wide range of biological sources and possesses strong molding abilities, natural 3D structures, and bioactive factors. Although DECM has shown robust osteogenic, proangiogenic, immunomodulatory, and bone defect healing potential, the rapid degradation and limited mechanical properties should be improved for bench-to-bed translation in BTE. This review summarizes the recent advances in DECM-based BTE and discusses emerging strategies of DECM-based BTE.

Injectable hyaluronate-based hydrogel with a dynamic/covalent dual-crosslinked architecture for bone tissue engineering: Enhancing osteogenesis and immune regulation

In orthopedic practice, accommodating irregular defects caused by trauma or surgery with traditional preformed bone graft substitutes is often challenging. As a result, injectable hydrogels with seed cells have garnered significant interest in bone repair due to their adaptability and minimally invasive properties. However, they cannot simultaneously achieve injectability and mechanical properties, providing a biophysical and biochemical environment for cell support. In this study, a novel injectable hydrogel system (OA hydrogel) loaded with aspirin and bone mesenchymal stem cells (BMSCs) was developed to enhance osteogenesis and immune regulation in small irregular bone defects. OA hydrogels possessed self-healing and shear-thinning properties due to dynamic/covalent hydrazone bonds between aldehyde-modified hyaluronic acid methacrylate (ADH-HAMA) and oxidized hyaluronic acid (OHA). By photopolymerization of the enclosed HAMA, the OADC hydrogel was further reinforced, making it more suitable for cell proliferation. In vitro, composite hydrogels improved the osteogenic differentiation of BMSCs. Additionally, it promoted the M2 polarization of human monocytic leukemia (THP-1) cells. In vivo, the synergistic effect of acetylsalicylic acid (ASA) and BMSCs encapsulated within the OADC hydrogel promoted new bone formation in rat calvaria through increased recruitment and polarization of M2 macrophages. These findings underscore the significant promise of hydrogels for bone tissue engineering applications.

Electrospun Polylactic Acid/Polyethylene Glycol/ Silicate‐Chlorinated Bioactive Glass Composite Scaffolds for Potential Bone Regeneration

ABSTRACTThe integration of bioglass with polymers in tissue engineering scaffolds holds promise for enhancing bone regeneration. This study explores the fabrication and characterization of composite scaffolds comprising polylactic acid (PLA)/polyethylene glycol (PEG) fibers incorporated with silicate‐chlorinated bioglasses (45S5 and 58S). Electrospinning was utilized to produce the scaffolds, followed by physical–chemical and in vitro evaluations. Scanning electron microscopy (SEM) revealed uniform fiber formation, with bioglass incorporation observed in the composite groups. Bioglass incorporation led to a significant reduction in fiber diameter. Thermogravimetric analysis (TGA) estimated bioglass content, with 58S exhibiting the highest incorporation. Contact angle measurements indicated enhanced hydrophilicity in bioglass‐containing groups. In vitro, bioactivity assessment in simulated body fluid (SBF) demonstrated apatite formation potential and the pH variance indicates a slightly alkaline to neutral condition. Cell culture studies revealed robust cellular adhesion and metabolic activity across all groups, with no cytotoxic effects observed. Overall, these findings suggest the potential of PLA/PEG bioglass composite scaffolds for bone tissue engineering applications.

Alginate-HEMA Hydrogels as Promising Biomaterials for Bone Regeneration: InVitro and InVivo Studies.

In the present work, the osteogenic and angiogenic properties of, previously developed, semi-interpenetrated HEMA-EGDMA polymeric networks (sIPN) with and without alginate with application in bone tissue engineering (BTE) were studied. Invitro characterization studies were performed using rat bone marrow progenitor cells (BMPCs), EA.hy926 endothelial cells, and rat vascular smooth muscle cells (VSMCs). Based on the invitro results of both this work and previous ones, the hydrogels were selected to carry out invivo studies to find out their capacity as a biomaterial using a bone regeneration model. Our results indicate that the incorporation of alginate into the HEMA-EGDMA polymeric network promotes osteogenic and angiogenic capacity in cell cultures of BMPCs and both EA.hy926 and VSMCs, respectively, and also increases bone formation and vascular structures in invivo studies, demonstrating its potential use as a biomaterial in BTE.

Innovative Biocompatible Blend Scaffold of Poly(hydroxybutyrate-co-hydroxyvalerate) and Poly(ε-caprolactone) for Bone Tissue Engineering: In Vitro and In Vivo Evaluation

This study evaluated the biocompatibility of dense and porous forms of Poly(hydroxybutyrate-co-hydroxyvalerate) (PHBV), Poly(ε-caprolactone) (PCL), and their 75/25 blend for bone tissue engineering applications. The biomaterials were characterized morphologically using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR), and the thickness and porosity of the scaffolds were determined. Functional assessments of mesenchymal stem cells (MSCs) included the MTT assay, alkaline phosphatase (ALP) production, and morphological and cytochemical analyses. Moreover, these polymers were implanted into rats to evaluate their in vivo performance. The morphology and FTIR spectra of the scaffolds were consistent with the expected results. Porous polymers were thicker than dense polymers, and porosity was higher than 92% in all samples. The cells exhibited good viability, activity, and growth on the scaffolds. A higher number of cells was observed on dense polymers, likely due to their smaller surface area. ALP production occurred in all samples, but enzyme activity was more intense in PCL samples. The scaffolds did not interfere with the osteogenic capacity of MSCs, and mineralized nodules were present in all samples. Histological analysis revealed new bone formation in all samples, although pure PHBV exhibited lower results compared to the other blends. In vivo results indicated that dense PCL and the dense 75/25 blend were the best materials tested, with PCL tending to improve the performance of PHBV in vivo.

Highly Porous 3D Nanofibrous Scaffold of Polylactic Acid/Polyethylene Glycol/Calcium Phosphate for Bone Regeneration by a Two-Step Solution Blow Spinning (SBS) Facile Route

This work presents the successful production of highly porous 3D nanofibrous hybrid scaffolds of polylactic acid (PLA)/polyethylene glycol (PEG) blends with the incorporation of calcium phosphate (CaP) bioceramics by a facile two-step process using the solution blow spinning (SBS) technique. CaP nanofibers were obtained at two calcium/phosphorus (Ca/P) ratios, 1.67 and 1.1, by SBS and calcination at 1000 °C. They were incorporated in PLA/PEG blends by SBS at 10 and 20 wt% to form 3D hybrid cotton-wool-like scaffolds. Morphological analysis showed that the fibrous scaffolds obtained had a randomly interconnected and highly porous structure. Also, the mean fiber diameter ranged from 408 ± 141 nm to 893 ± 496 nm. Apatite deposited considerably within 14 days in a simulated body fluid (SBF) test for hybrid scaffolds containing a mix of hydroxyapatite (HAp) and tri-calcium phosphate-β (β-TCP) phases. The scaffolds with 20 wt% CaP and a Ca/P ration of 1.1 showed better in vitro bioactivity to induce calcium mineralization for bone regeneration. Cellular tests evidenced that the developed scaffolds can support the osteogenic differentiation and proliferation of pre-osteoblastic MC3T3-E1 cells into mature osteoblasts. The results showed that the developed 3D scaffolds have potential applications for bone tissue engineering.

Role of NEL‑like molecule‑1 in osteogenesis/chondrogenesis (Review).

A dynamic balance exists between osteogenesis and osteoclastogenesis in bone tissue, which can lead to several bone diseases, such as osteoporosis, osteoarthritis, bone necrosis and bone defects, in cases of insufficient osteogenesis or excessive osteoclastogenesis. NEL‑like molecule‑1 (NELL‑1) was first discovered in 1999 as an osteogenic factor that can prevent or treat bone diseases by increasing osteogenic levels. To date, research has identified multiple signaling pathways involved in improving osteogenic levels. Furthermore, to apply NELL‑1 in clinical practice, researchers have optimized its osteogenic effect by combining it with other molecules, changing its molecular structure and performing bone tissue engineering. Currently, research on NELL‑1 is gaining increasing attention. In the near future, it will definitely be applied in clinical practice to eliminate diseases. Thus, the present study provides a comprehensive review of NELL‑1 in enhancing osteogenic levels from the perspectives of the molecular mechanism, interactions with other molecules/cells, molecular‑level changes, applications in bone tissue engineering and its expression in tumors, providing a solid theoretical basis for its clinical application.

Enhanced Mechanical Properties and Degradation Control of Poly(Lactic) Acid/Hydroxyapatite/Reduced Graphene Oxide Composites for Advanced Bone Tissue Engineering Application

This study explores the enhancement of poly(lactic acid) (PLA) matrix using calcium hydroxyapatite (cHAP) and reduced graphene oxide (rGO) for developing composite scaffolds aimed at bone regeneration applications. The PLA composites were fabricated through solvent evaporation and melt extrusion and characterized by various techniques, including thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and mechanical testing. The incorporation of cHAP and rGO significantly improved the thermal, mechanical, and morphological properties of the PLA matrix. Mechanical testing revealed that adding 10% cHAP and varying amounts of rGO (0.1%, 0.3%, 0.5%) enhanced tensile and compressive strengths, with the highest improvements observed at 0.5% rGO content. Thermal analysis showed increased thermal stability with higher degradation temperatures for the composites. Spectroscopic analyses confirmed the effective integration of cHAP and rGO into the PLA matrix with characteristic peaks of the fillers identified in the composite spectra. In vitro, degraded action tests in phosphate-buffered saline (PBS) at pH 7.4 over 12 months indicated that composites with higher rGO content exhibited lower mass loss and better mechanical stability. Furthermore, finite element analysis (FEA) simulations were performed to validate the experimental results, demonstrating a strong correlation between simulated and experimental compressive strengths. This novel approach demonstrates the potential of PLA/cHAP/rGO composites in creating effective and biocompatible scaffolds for tissue engineering, providing a comprehensive analysis of the synergistic effects of cHAP and rGO on the PLA matrix and offering a promising material for bone regeneration applications.

Applications of hydroxyapatite-based polymeric scaffolds in bone tissue engineering: An update

Bone tissue is a comprising of an organic and inorganic environment, in which the collagen element and the mineral part are structured into complex and spongy constructions. Hydroxyapatite (HAp) is the chief inorganic constituent of human bone. HAp is extensively utilized in bone tissue regeneration for its bioactivity and biocompatibility, and a rising number of investigators are discovering ways to recover the physical belongings and biological roles of HAp. However, this biomimetic material has poor mechanical properties, such as low tensile and compressive strength, which make it not suitable for bone tissue engineering (BTE). For this reason, HA is frequently utilized in a mixture with diverse polymers to increase their mechanical strengths and the general performance of the implantable biomaterials advanced for orthopedic usage. In this review, we attempt to contribute a brief and inclusive outline of HAp-based natural and synthetic polymer materials as reinforcing components and their applications in bone tissue engineering.

A review of computational optimization of bone scaffold architecture: Methods, challenges, and perspectives

Abstract The design and optimization of bone scaffolds are critical for the success of bone tissue engineering (BTE) applications. This review paper provides a comprehensive analysis of computational optimization methods for bone scaffold architecture, focusing on the balance between mechanical stability, biological compatibility, and manufacturability. Finite Element Method (FEM), Computational Fluid Dynamics (CFD), and various optimization algorithms have been discussed for their roles in simulating and refining scaffold designs. The integration of multiobjective optimization and topology optimization has been highlighted for developing scaffolds that meet the multifaceted requirements of BTE. Challenges such as the need for consideration of manufacturing constraints, and the incorporation of degradation and bone regeneration models into the optimization process have been identified. The review underscores the potential of advanced computational tools and additive manufacturing techniques in evolving the field of BTE, aiming to improve patient outcomes in bone tissue regeneration. The reliability of current optimization methods is examined, with suggestions for incorporating non-deterministic approaches and in vivo validations to enhance the practical application of optimized scaffolds. The review concludes with a call for further research into artificial intelligence-based methodologies to drive the next generation of scaffold design and optimization.

Investigating the impact of coagulation bath temperature on the properties of biphasic calcium phosphate/poly(vinylidene fluoride)‐based membrane scaffold via immersion precipitation

AbstractIn this study, composite membrane scaffolds comprising poly(vinylidene fluoride) (PVDF) and boron‐containing biphasic calcium phosphate (BCP) are developed using a non‐solvent‐induced phase separation technique at coagulation bath temperatures of −5, 0, 10, and 20 °C. The morphology, pore size and tensile strength of the scaffolds are primarily influenced by the bath temperature. Moreover, raising the bath temperature enhances the thermal properties and β‐crystalline phase fraction. Results demonstrate that changes in the temperature increase the surface hydrophilicity and reduce the degree of swelling. According to the in vitro bioactivity analysis, apatite growth is affected by the interactive relation between the surface of the samples and the simulated body fluid (SBF) medium, in addition to the superior bioactivity of the scaffolds. In vitro cytotoxicity assay results confirm the extensive spreading of L‐929 cells on the sample surfaces, indicating the high biocompatibility of the scaffolds. Based on these favorable properties, the novel composite membranes produced, particularly at 20 °C coagulation bath temperature, may contribute to applications in bone tissue engineering.

Fabrication of copper ion-substituted hydroxyapatite/Silk fiber/Methylcellulose composite: mechanical, antimicrobial, hemocompatibility, bioactivity and cytocompatibility evaluation

Herein, we reported the preparation of copper substituted hydroxyapatite (Cu-HAP) and fabrication of electrospun composites using Cu-HAP, SF (Silk fiber) and MC (Methylcellulose) by E-Spin method. Characterization techniques such as XRD (phase formation), FTIR (chemical bonds), SEM and EDAX (surface morphology and elemental composition) were carried out. Porosity measurement, swelling and mechanical properties were carried out to investigate the physicochemical properties of the fabricated electrospun composites. The hemocompatibility analysis indicated a hemolysis ratio < 2 %, which confirms the blood compatibility nature of the composite. Antibacterial activity of Copper hydroxyapatite/silk fiber/ Methylcellulose electrospun composite showed estimable activity against E.coli (zone of inhibition: 46 ± 0.94 mm) compared with pure SF/MC electrospun composite (33 ± 1.21). Bioactivity study confirmed the development of bone-like apatite on the surfaces of optimized (SF/MC 30 wt% of Cu-HAP) electrospun composite. Furthermore, MG63 cells were utilised to study the biocompatibility of the enhanced electrospun composite and good cell viability (99.93 ± 0.12 % using 25 μg/mL) was observed from microscopic image and the results showed that 30 wt% of Cu-HAP added polymer composite has outstanding osteoinductivity, biocompatibility, and antibacterial results, making it a very valuable aspirant for use in bone tissue engineering (BTE) applications to repair bone defects.

Determination of the Optimum Architecture of Additively Manufactured Magnetic Bioactive Glass Scaffolds for Bone Tissue Engineering and Drug-Delivery Applications.

For better bone regeneration, precise control over the architecture of the scaffolds is necessary. Because the shape of the pore may affect the bone regeneration, therefore, additive manufacturing has been used in this study to fabricate magnetic bioactive glass (MBG) scaffolds with three different architectures, namely, grid, gyroid, and Schwarz D surface with 15 × 15 × 15 mm3 dimensions and 70% porosity. These scaffolds have been fabricated using an in-house-developed material-extrusion-based additive manufacturing system. The composition of bioactive glass was selected as 45% SiO2, 20% Na2O, 23% CaO, 6% P2O5, 2.5% B2O3, 1% ZnO, 2% MgO, and 0.5% CaF2 (wt %), and additionally 0.4 wt % of iron carbide nanoparticles were incorporated. Afterward, MBG powder was mixed with a 25% (w/v) Pluronic F-127 solution to prepare a slurry for fabricating scaffolds at 23% relative humidity. The morphological characterization using microcomputed tomography revealed the appropriate pore size distribution and interconnectivity of the scaffolds. The compressive strengths of the fabricated grid, gyroid, and Schwarz D scaffolds were found to be 14.01 ± 1.01, 10.78 ± 1.5, and 12.57 ± 1.2 MPa, respectively. The in vitro study was done by immersing the MBG scaffolds in simulated body fluid for 1, 3, 7, and 14 days. Darcy's law, which describes the flow through porous media, was used to evaluate the permeability of the scaffolds. Furthermore, an anticancer drug (Mitomycin C) was loaded onto these scaffolds, wherein these scaffolds depicted good release behavior. Overall, gyroid-structured scaffolds were found to be the most suitable among the three scaffolds considered in this study for bone tissue engineering and drug-delivery applications.

Fabrication and characterization of nanohydroxyapatite/chitosan/decellularized placenta scaffold for bone tissue engineering applications

Novel biomaterials are necessary to fabricate biomimetic scaffolds for bone tissue engineering. In the present experiment, we aimed to fabricate and evaluate the osteogenic properties of nanohydroxyapatite/chitosan/decellularized placenta (nHA.Cs.dPL) composite scaffolds. The human placenta was decellularized (dPL), characterized, and digested in pepsin to form the hydrogel. nHA.Cs.dPL scaffolds were fabricated using salt leaching/freeze drying and evaluated for their morphology, chemical composition, swelling, porosity, degradation, mechanical strength, and biocompatibility. Saos-2 cells were seeded on scaffolds, and their osteogenic properties were investigated by evaluating alkaline phosphatase (ALP), osteocalcin (OCN), collagen type 1 (COL I) expression, and calcium deposition under osteogenic differentiation. The dPL was prepared with minimized DNA content and a well-preserved porous structure. Scaffolds were highly porous with interconnected pores and exhibited appropriate swelling and degradation rates supporting saos-2 cell attachment and proliferation. dPL improved scaffold physicochemical features and increased cell proliferation, ALP, OCN, COL I expression, and calcium deposition under osteogenic differentiation induction. nHA.Cs.dPL composite scaffolds provide a 3D microenvironment with superior physicochemical features that support saos-2 cell adhesion, proliferation, and osteogenic differentiation.

Investigating the impact of curcumin extract incorporation on PVA/Collagen/Chitosan/HAp nanofiber scaffold: morphological, mechanical, wettability, degradation rate, and antibacterial activity

This study investigates the impact of curcumin extract incorporation on the properties of PVA/Collagen/Chitosan/HAp nanofiber scaffolds for bone tissue engineering applications. Nanofibers were fabricated via electrospinning using PVA, collagen, chitosan, hydroxyapatite (HAp), and curcumin. Their morphology, mechanical properties, wettability, degradation rate, and antibacterial activity were comprehensively evaluated. Fourier transform infrared (FTIR) spectroscopy confirmed the successful incorporation of all components into the nanofibers and the potential for interactions between their functional groups. Scanning Electron Microscopy (SEM) revealed bead-free, fine nano-fibers with a decrease in diameter ranging from 139 nm to 108 nm. Simultaneously, enhanced mechanical properties were observed, with ultimate strength increasing from 2.8 MPa to 8.8 MPa as the diameter decreased. Notably, 15% curcumin extract maintained favorable hydrophilicity and degradation rates, crucial factors for tissue regeneration. Antibacterial activity was also enhanced, with an inhibition zone of 6.71 mm against E.coli observed at 15% curcumin treatment. Staphylococcus aureus exhibited the largest zone of inhibition (8.74 mm) at 15% curcumin concentration. This research demonstrates the feasibility of incorporating curcumin into nanofiber scaffolds for bone tissue engineering applications.

Piezoelectric Scaffolds as Smart Materials for Bone Tissue Engineering.

Bone repair and regeneration require physiological cues, including mechanical, electrical, and biochemical activity. Many biomaterials have been investigated as bioactive scaffolds with excellent electrical properties. Amongst biomaterials, piezoelectric materials (PMs) are gaining attention in biomedicine, power harvesting, biomedical devices, and structural health monitoring. PMs have unique properties, such as the ability to affect physiological movements and deliver electrical stimuli to damaged bone or cells without an external power source. The crucial bone property is its piezoelectricity. Bones can generate electrical charges and potential in response to mechanical stimuli, as they influence bone growth and regeneration. Piezoelectric materials respond to human microenvironment stimuli and are an important factor in bone regeneration and repair. This manuscript is an overview of the fundamentals of the materials generating the piezoelectric effect and their influence on bone repair and regeneration. This paper focuses on the state of the art of piezoelectric materials, such as polymers, ceramics, and composites, and their application in bone tissue engineering. We present important information from the point of view of bone tissue engineering. We highlight promising upcoming approaches and new generations of piezoelectric materials.

How to select agroforestry waste biomass for electrospinning and its potential application in bone tissue engineering

The high value-added utilization of agroforestry waste biomass is urgent. Herein, a feasible approach was provided to obtain biodegradable cellulose fibrous films from agroforestry waste biomass. The cellulose used was extracted from agroforestry waste biomass and then the cellulose fibrous film was obtained by direct electrospinning. Lignin-carbohydrate complex (LCC) structure was considered as the key factor for the dissolution of lignocellulose while cellulose molecular weight >335,664 was suitable for electrospinning. Bamboo cellulose was chosen as an example to verify the potential application of the electrospun cellulose films from agroforestry waste biomass. The as-prepared electrospun bamboo cellulose fibrous film exhibited a tensile strength of 24.12 MPa, which outperformed most of the reported electrospun nanofibrous films. Moreover, the film possessed a super-wetting surface and outstanding cytocompatibility. These excellent properties offer the film with immense potential for application in bone tissue engineering. In addition, this work provides a new route for transforming agroforestry waste into high value-added products.

Influence of manufacturing parameters on bioactive glass 45S5: Structural analysis and applications in bone tissue engineering

Bioactive glass (BG-45S5) production through the melting process is affected by a wide variety of parameters. This study investigated the synthesis of BG-45S5 granules and the process variables to produce a bioactive and osteoinductive BG for bone grafting applications. The melting process was initially analyzed by varying parameters such as crucible type and pouring environment using P2O5 as phosphorus precursor. The obtained products were characterized by crystalline phases, characteristic chemical groups, particle size distribution, and chemical composition. Materials poured into graphite or steel molds resulted in particle sizes more suitable for applications in granular form. Using a platinum crucible yielded a chemical composition closer to the target when compared with another ceramic crucible. Subsequently, the melting process was evaluated to different phosphorus precursor (P2O5 or Na2HPO4) and melting duration (1 or 2 h) in a platinum crucible verifying their effects on the thermal behavior, chemical composition and structure of BG-45S5. Employing Na2HPO4 as a precursor led to higher glass transition and crystallization temperatures as compared to P2O5, enhancing glass homogeneity and structural stability. The product with better characteristics in terms of composition and structure was further characterized for bioactivity and cell culture behavior, showing a greater amount of mineralization nodules when compared to commercial hydroxyapatite. This is particularly due to its behavior as the solubility and interaction in biological environments.

ω-9 monounsaturated fatty acids in Sapindus mukorossi seed oil enhance calcium deposition expression of Wharton’s jelly mesenchymal stem cells

Promoting osteogenesis is crucial to improve successful bone regeneration in bone tissue engineering. Several studies on osteogenesis have reported positive effects of ω-9 monounsaturated fatty acids (MUFA) on bone regeneration. This study examined the potential of ω-9 monounsaturated fatty acid abundant seed oil mechanically extracted from Sapindus mukorossi (S. mukorossi) fruit to improve osteogeneses. After showing the presence of ω-9 MUFA in S. mukorossi seed oil (SM oil) through GC-MS spectrum analysis, the proliferation and differentiation of human umbilical cord Wharton’s jelly mesenchymal stem cells (WJMSCs) under SM treatment was evaluated. Our results indicate that WJMSC differentiation was induced by adding an osteogenesis-induced medium combined with SM oil. A high level of calcium deposition expression in WJMSCs induced by SM oil appears to be due to the effect of oleic acid and eicosenoic acid, both of which are ω-9 monounsaturated fatty acids. In addition, we found major contributors of SM oil-promoted WJMSC osteogenesis to be extracellular signal-regulated kinase (ERKs), c-Jun N-terminal kinase (JNKs), and the p38 MAPK pathway. The enhancement of WJMSC osteogenesis via ERK/MAPK pathways as demonstrated by qPCR analysis indicates the promise of SM oil for stem cell-based bone tissue engineering applications.

One-step synthesis of a piezoelectric hybrid BNNT/BaTiO3 composite and its application in bone tissue engineering

Nanomaterials with piezoelectric properties can significantly improve the applicability of polymers used in tissue engineering applications. In this study, we report the one-step synthesis of a novel hybrid piezoelectric composite comprising barium titanates and boron nitride nanotubes. This composite is distinguished by its unique microstructures, including nanoflakes, triangular boron nitride structures, and fiber-like boron nitride nanotube configurations, which contribute to its enhanced piezoelectric properties. The composite was incorporated into a chitosan-based tissue scaffold and evaluated in vitro. Electric-responsive Human Osteoblast cells cultured on the scaffolds are exposed to low-frequency ultrasound stimulation during cell growth. The biocompatibility, cell adhesion, alkaline phosphatase activities, and mineralization of osteoblast cells on the piezo-composite scaffolds were evaluated. The results show that the hybrid piezoelectric composite significantly enhances the properties of chitosan-based scaffold.