Transmission Applications Research Articles

Improved design and performance of the global rectenna system for wireless power transmission applications around 2.45 GHz

This work proposes a new conception of the global microstrip rectenna system operating around 2.45 GHz. This improved rectenna system associates a receiving antenna with a rectifier circuit. This rectenna is printed on an FR4 substrate. The proposed antenna is a 1×4 microstrip antenna patch array with pentagonal patches using the defective ground structure method and operates with circular polarization. To show the effectiveness of this array, the results obtained by the computer simulation technology microwave studio (CST MWS) software prove that this array is good in terms of high gain, high directivity, high efficiency, wideband, small volume, and well-adaptation, and all these results are confirmed by another solver high-frequency structure simulator (HFSS). The improved rectifier is a microstrip rectifier that uses an HSMS2852 Schottky diode by using a series topology. The effectiveness of this rectifier is proved by the simulation results using advanced design system (ADS) software in terms of well-matching input impedance, high efficiency, and important output direct current (DC) voltage value. The proposed rectenna system is more efficient compared with the existing works and is very appropriate for several applications of wireless power transmission to power supply electronic instruments in various fields cleanly on our planet.

Design of Wideband Energy Capturing Adapter Based on 3-D Meta-Structure for Wireless Power Transmission Application

Design of Wideband Energy Capturing Adapter Based on 3-D Meta-Structure for Wireless Power Transmission Application

Frequency Stability Analysis and Charging Area Expanding Optimal Design for Matrix Coupling Mechanism in Wireless Power Transfer System

The matrix coupling mechanism brings flexibility and reliability to energy supply in the form of multiple transmitting coils and is now favored in most wireless energy transmission applications, such as wireless charging boards for mobile phones, inspection robots, and so on. However, the process of considering the layout of the matrix coupling mechanism and the output performance based on the target in space is very complex, while also taking into account the need to avoid impedance changes caused by cross-interference between each unit, which can lead to frequency inconsistency. This paper proposes a design method based on space charging area expansion for matrix coupling mechanisms, and on this basis, it focuses on analyzing the impedance mismatch phenomenon caused by cross mutual inductance and inconsistent mutual inductance between coil units, in order to obtain the optimal topology to avoid frequency drift as much as possible. Finally, the effectiveness of the method is validated through simulation and experiments.

A machine learning-based assessment model for defect diagnosis in XLPE power cables

Cross-linked polyethylene (XLPE) power cables are commonly used in flexible DC transmission applications. The diagnosis of the defects of XLPE power cable has consistently been a focal point of research as it is an essential equipment for power delivery. Previous research works have seldom employed machine learning methods to deal with this problem. Therefore, this work presents a machine learning-based assessment model that combines the Categorical Boosting (CatBoost) algorithm and Aquila optimizer. The CatBoost model is developed to examine the stages of the cable defect. The load condition, corrosion condition, operating life, and partial discharge are the inputs into the CatBoost model. The Aquila optimizer is employed to optimize parameters in an automated manner during the training of the CatBoost model. The performance comparison is made between the proposed model and the existing models. The proposed model demonstrates a high level of accuracy, precision, recall, and F1-score, all higher than 99 %. The model exhibits at least 1 % more achievement in accuracy, precision, recall, and F1-score when compared to the next best model, XGBoost. These results suggest that the proposed model is capable of effectively assessing the stages of cable defects. In addition to this, these experimental results of the proposed model are superior to those of the existing models, which demonstrate that the proposed model is superior to the existing models in terms of its ability to assess the defect stages of cables.

Simultaneous measurement of hydrogen and methane concentrations with temperature self-calibration based on a SPR sensor with an anchor-shaped photonic crystal fiber

Hydrogen and methane are flammable and explosive gases, and their simultaneous measurement holds significant importance in applications of industrial safety and energy transmission. A high-sensitivity multi-parameter sensor based on the surface plasmon resonance (SPR) within an anchor-shaped photonic crystal fiber (AS-PCF) have been proposed and analyzed in detail, which can simultaneously measure hydrogen and methane concentrations while providing temperature self-compensation. To achieve simultaneous detection of hydrogen and methane, an open ring channel is introduced in both the x and y directions of the PCF. Each of these channels is coated with a layer of gold film and gas-sensitive films for hydrogen and methane, respectively. The designed AS-PCF structure is optimized to increase the reactive surface area between the gas and the gas-sensitive films, simultaneously enhancing the energy leakage of core modes to improve sensor performance. In addition, temperature sensitivity is augmented by filling PCF air holes with ethanol and enhancing the asymmetry of the fiber structure. The changes of gas concentration and environmental temperature are derived by demodulating the peak wavelength shifts in the loss and interference spectra. Simulation analysis demonstrates that the sensor can achieve average sensitivities of −0.23 nm/% for hydrogen and −4.84 nm/% for methane within the gas concentration range of 0.5 % to 3 %. Meanwhile, the temperature sensitivity can reach 0.58 nm/°C within the temperature range of 10 °C to 30 °C. This sensor demonstrates excellent linearity and high sensitivity, making it a promising tool for multi-gas measurements in various applications.

Nylon 66 short fiber reinforcement in EPDM power transmission belting: A path to enhanced mechanical performance

AbstractV‐belts are commonly used to transmit power between two distant pulleys. Therefore, a strong reinforcement for dimensional stability and thermomechanical properties are essential in power transmission belts. The influence of resorcinol formaldehyde resin (RFL) treated nylon short fibers in EPDM peroxide‐cured formulations was investigated, with concentrations ranging from 0 to 30 parts per hundred rubber (phr) in increments of five. The incorporation of nylon short fibers resulted in improved tensile and mechanical properties in EPDM vulcanizates. Specifically, the tensile stress at 100% elongation increased by 177% to (10.8 MPa), and the improvement in tear strength to 16.2% (75.7 N/mm) was observed. Among other functional requirements in a weak rubber like EPDM, enhanced tear strength is significant for its application in power transmission. Substantial reinforcement between the fiber‐elastomer matrix was confirmed via scanning electron microscopy, as evidenced by increased storage modulus (E′). Notably, there were no considerable effects on the curing rate or low‐temperature properties. Significant improvement in heat stability is observed through thermogravimetric analysis. These enhancements in mechanical and thermal properties might play a role in increased durability and performance in actual V‐ribbed belt applications.Highlights This manuscript describes the effect of treated nylon 66 short fiber on EPDM V‐belt compound. A significant increase in storage modulus, tear strength, and thermal stability. A belt is made using the experimental formulation and it meets the performance requirement. Low fiber content (<15 phr) compounds are unsuitable for dimensional stability. High fiber content (>25 phr) compounds pose processing challenges.

Surface Structural Changes in Silicone Rubber Due to Electrical Tracking.

There is a growing interest in the use of silicone composite insulators for electrical power transmission and distribution applications. However, such materials are susceptible to degradation as they are exposed to electrical and environmental stresses during operating conditions. Therefore, it is crucial to gain a thorough understanding of the degradation mechanism through changes in the material structure that may provide insight into potential failures in the electrical grid. Attenuated total reflection Fourier transform infrared spectroscopy and two-dimensional correlation spectroscopy (2D-COS) were used along with contact angle measurements to characterize changes in silicone rubber samples from actual insulators subjected to tracking wheel testing. The results showed a decrease in absorbance of different infrared bands representing different functional groups, such as Si-O-Si, methyl functional groups, and both Al-O and hydroxyl groups of alumina trihydrate as a function of the number of tracking cycles. The sequence of changes in the functional groups was determined by 2D-COS as Al-O and OH followed by Si-O-Si polymer backbone modes, followed by polymer methyl side chains. An enhancement in the average contact angle with the number of tracking cycles revealed a concomitant increase in surface roughness with electrical tracking.

Optical Conveyance of Audio Signals: Pioneering Li-Fi Technology for High-Fidelity Data Transmission

This paper explores the integration of Li-Fi technology for transmitting high-fidelity audio signals in modern communication systems. Li-Fi, a wireless communication technology utilizing light signals, offers numerous advantages over traditional radio frequency-based methods, including higher data rates, reduced electromagnetic interference, and enhanced security. Leveraging the unique properties of Li-Fi, such as its ability to transmit data through light waves, this study investigates its potential application in audio signal transmission. Through experimental analysis and theoretical considerations, we demonstrate the feasibility and efficacy of Li-Fi for delivering high-quality audio signals in various scenarios. Our findings contribute to advancing the understanding of Li-Fi technology and its potential role in shaping the future of wireless audio communication.

Optical Conveyance of Audio Signals: Pioneering Li-Fi Technology for High-Fidelity Data Transmission

This paper explores the integration of Li-Fi technology for transmitting high-fidelity audio signals in modern communication systems. Li-Fi, a wireless communication technology utilizing light signals, offers numerous advantages over traditional radio frequency-based methods, including higher data rates, reduced electromagnetic interference, and enhanced security. Leveraging the unique properties of Li-Fi, such as its ability to transmit data through light waves, this study investigates its potential application in audio signal transmission. Through experimental analysis and theoretical considerations, we demonstrate the feasibility and efficacy of Li-Fi for delivering high-quality audio signals in various scenarios. Our findings contribute to advancing the understanding of Li-Fi technology and its potential role in shaping the future of wireless audio communication.

Development of polyvinyl alcohol/carrageenan hydrogels and fibers via KOH treatment for Morse code information transmission

To solve the inherent problems of conductive hydrogels, such as relatively low mechanical properties and fatigue resistance, inability to work after water loss, and difficulty weaving. In this study, the borax-crosslinked polyvinyl alcohol/k-carrageenan (kC) conducting hydrogels (BPKKOH) were prepared by a simple one-pot method, and KOH treatment was used instead of the cumbersome and time-consuming freeze-thaw cycle to improve the comprehensive properties. The KOH treatment increased the hydrogel hydrogen bonding content by 7.72 % and synergized with the induction of kC by K+ to enhance the tensile and compressive strengths by 8.12 and 34.6 times, respectively. Meanwhile, the BPKKOH hydrogel's fatigue resistance and shape recovery after water loss were improved. Additionally, the BPKKOH hydrogels can be monitored for finger bending, showing clear and stable differences in electrical signals. BPKKOH hydrogels combined with Morse code realize applications in information transmission and encryption/decryption. Notably, introducing KOH ensures the molding and preparation of BPKKOH hydrogel fibers while having good signal responsiveness and monitoring ability. More importantly, it can be woven into fabrics that can be loaded with heavy weights, which has the potential to be directly applied in smart wearables. This work provides new ideas for applying flexible sensors and wearable smart textiles.

Tuning the electro-optical properties of germanene nanoribbons by boron atom substitution for application in information transmission

Germanene nanoribbons, a one-dimensional material, have great potential for future technological applications. This research aims to investigate the electro-optical properties of boron-doped germanene nanoribbons with a width of five atoms. The theory used in this study is density functional theory (DFT). The original system is a narrow band gap semiconductor, with a gap size of 0.06[Formula: see text]eV. The doped configurations, which retain the honeycomb hexagonal structure, are stable and metallic in nature. The introduction of B atoms flattens the configuration, leading to a partial charge shift from Ge to B. The absorption peaks in the 3B and 5B configurations occur in the frequency range less than 500[Formula: see text]nm, indicating good absorption of visible light, and suggesting possible applications in light-sensitive components. Notably, the real part of the dielectric function’s 0z component is negative, offering immense potential for optical, microwave and communication applications.

MAPbI3 perovskite photodetectors for high-performance optical wireless communication

High-sensitivity and fast-response photodetectors (PDs) are vital part of optical wireless communication (OWC) system. In this work, we develop an organic–inorganic hybrid perovskite material (MAPbI3) based p–i–n structured PD. By optimizing the precursor solution concertation, the PD showed a high responsivity of 0.98 A W−1, a fast response time t rise/t fall of 12/12.5 μs, a specific detectivity of 2.62 × 1013 Jones, and the f−3dB of 24 kHz under the 532 nm laser and −0.2 V bias voltage. Furthermore, we designed an OWC system based on the prepared PD. With the baud rate of 19200 bps, the system exhibits a bit error rate less than 10−6, and it can realize 9.63 m long-distance communication and quick transmission applications such as strings, texts, photos, and audios. Our work demonstrates the great application potential of perovskite PDs in the field of optical communication.

Asymmetrically Layered Unit Cell Topology to Reduce Cell Gap of Liquid Crystals for 5G Millimeter-Wave Transmissive Reconfigurable Intelligent Surface Applications

Asymmetrically Layered Unit Cell Topology to Reduce Cell Gap of Liquid Crystals for 5G Millimeter-Wave Transmissive Reconfigurable Intelligent Surface Applications

Performance Investigation of HFR Full-bridge Inverter in Resonant Inductive Coupled Power Transfer System for an Electric Vehicle

Inductive WPT of the resonant category is generally employed for medium and high-power transmission applications like electric vehicle charging due to it contributes excellent efficiency. The high-frequency resonant full-bridge inverter using series-series resonant topology is proposed. The design of the high-frequency resonant inverter is simulated and verified by MATLAB/SIMULINK software. The charging scheme which is available in the AC-DC as well as in the DC-DC converter should operate with the two steps to achieve a duty cycle-based voltage control and hysteresis current control. The resonant frequency of the proposed system has a frequency range of 65 kHz with a DC voltage of 12V. The simulation has been carried out successfully and transmitted a 5KW power load of constant current and voltage control. The Performance chart of with the existing method is carried out in terms of parameters and the efficiency can be achieved by 95%.

212Gbps high-power EML for 800G artificial intelligence optical transmissions

We present a high-power, high-speed 212Gbps four-level Pulse Amplitude Modulation (PAM4) Electro-absorption Modulated Laser (EML) designed for 800G LR4 optical transmission and Artificial Intelligence (AI) applications. The Lan wavelength division multiplexing (LWDM) EML channels, operating at wavelengths of 1295.56 nm, 1300.05 nm, 1304.58 nm, and 1309.14 nm in 800G LR4 optical transceivers, exhibit clear eye openings even after 10km of transmission. Our 212Gbps PAM4 LWDM EMLs demonstrate high bandwidth, high extinction ratio, high power, and high energy efficiency, making them suitable for 10km transmission and environmentally friendly connectivity.

Short‐Wave Infrared Photodetectors Based on β‐In2Se3/Te Heterojunctions for Optical Communication and Polarimetric Imaging Applications

AbstractPolarization‐sensitive infrared photodetectors have vast application prospects in imaging systems and polarization sensors due to the addition of new detection dimensions beyond wavelength and intensity. However, most polarization‐sensitive photodetectors are operated in the visible wavelength range and still encounter challenges of limited responsivity (R) and polarization ratio (PR) under short‐wave infrared illumination. To address these issues, a vertical heterostructure of β‐In2Se3‐on‐Te is reported, achieving high‐performance and polarization‐sensitive imaging sensors in the short‐wave infrared (SWIR) region. The high R (2 A/W at 1310 nm and 0.71 A/W at 1550 nm) and specific detectivity (2.14 × 109 Jones at 1310 nm and 7.3 × 108 at 1550 nm) are obtained, which surpasses most photodetectors using anisotropic 2D material in the infrared range. Considering the strong anisotropic nature of Te nanosheets, the device exhibits notable polarization sensitivity with a PR value of 4.95 under 1310 nm laser irradiation. This work proposes a multifunctional photodetector for the great applications of ASCII code transmission and polarization‐sensitive infrared imaging, offering a new opportunity for versatile angle‐resolved optoelectronics in the infrared communication band.

An Atomic-Scale Vector Network Analyzer.

Electronic devices have been ever-shrinking toward atomic dimensions and have reached operation frequencies in the GHz range, thereby outperforming most conventional test equipment, such as vector network analyzers (VNA). Here the capabilities of a VNA on the atomic scale in a scanning tunneling microscope are implemented. Nonlinearities present in the voltage-current characteristic of atoms and nanostructures for phase-resolved microwave spectroscopy with unprecedented spatial resolution at GHz frequencies are exploited. The amplitude and phase response up to 9.3GHz is determined, which permits accurate de-embedding of the transmission line and application of distortion-corrected waveforms in the tunnel junction itself. This enables quantitative characterization of the complex-valued admittance of individual magnetic iron atoms which show a lowpass response with a magnetic-field-tunable cutoff frequency.

Electromagnetic Waves: Exploring The Fundamental Properties and Impact on Modern Technology and Society

This paper thoroughly investigates electromagnetic waves (EM), highlighting their fundamental characteristics, applications in electrical energy transmission, and mobile phone technology. The study begins by dissecting EM waves’ wave-particle duality and spectrum range, establishing a foundation to understand their significant role in modern technology and society. A key focus is placed on their efficiency in electrical energy transmission, especially relevant in the context of increasing energy demands and the integration of renewable resources for sustainable development. The paper also examines how electromagnetic waves have revolutionized mobile phone technology, encompassing aspects like wireless connectivity, GPS, and near-field communication, profoundly influencing global communication and information exchange. Despite these advancements, the paper acknowledges challenges like health and environmental risks associated with electromagnetic pollution. These complexities underscore the need for balanced advancement in electromagnetic wave applications and technology.

Surface Design of 3D-printed Polyether Ether Ketone for Abrasive Wear Resistance

The surface features of additively manufactured polymer parts differ compared to extruded polymer parts and decide their performance in terms of power transmission applications. Layer thickness is one of the important process parameters chosen based on the part complexity and production speed, influencing the surface features. The abrasive wear performance of high-performance polyether ether ketone (PEEK), which determines the performance of power transmission elements such as bearings and gears, is reported in this article. The layer thickness employed in fabrication, which varies from 0.1 mm to 0.35 mm, influences the surface roughness, real contact area, and hardness of the as-printed PEEK. The friction coefficient and wear resistance of a printed part are influenced by the layer thickness employed, indicating the need for a proper choice of layer thickness for power transmission applications. Samples printed with a layer height of 0.25 mm and higher exhibited an increase of friction coefficient and wear loss due to the weak surface integrity. The friction and wear characteristics of additive manufactured samples are compared with extruded samples. Wear debris accommodation in the grooves of the as-printed surfaces accelerates the wear due to three-body abrasion in high layer thickness samples. The micromechanisms of wear damage in different layer thickness samples are discussed. The observations indicate the strong influence of layer thickness and facilitate the selection of appropriate layer thickness for the required friction coefficient in a particular application.

Vibrating Micro-Capsule as an Autonomous Device for in-situ Endoscopic Scan and Body Tissue Characterization

This work concerns the implementation of a diagnostic technique for the digestive system using a device designed based on a spherical vibrating capsule of 1 cm in diameter and autonomous by its onboard electronics. For local scanning, this device is also equipped with a network of high-frequency optimized sensors. Depending on the desired diagnosis, this device can adapt its electromechanical characteristics to the nature of the application in transmission and/or simultaneous reception. It is also designed for network configuration to provide a 3D mapping of the acoustic properties of the environment under investigation (biological tissues).