Engineering Applications Research Articles

Electrical Stimulating Redox Membrane Incorporated with PVA/Gelatin Nanofiber for Diabetic Wound Healing.

Chronic wounds adversely affect the quality of life. Although electrical stimulation has been utilized to treat chronic wounds, there are still limitations to practicing it due to the complicated power system. Herein, an electrostimulating membrane incorporated with electrospun nanofiber (M-sheet) to treat diabetic wounds is developed. Through the screen printing method, the various alternate patterns of both Zn and AgCl on a polyurethane substrate, generating redox-mediated electrical fields are introduced. The antibacterial ability of the patterned membrane against both E. coli and S. aureus is confirmed. Furthermore, the poly(vinyl alcohol) (PVA)/gelatin electrospun fiber is incorporated into the patterned membrane to enhance biocompatibility and maintain the wet condition in the wound environment. The M-sheet can improve cell proliferation and migration in vitro and has an immune regulatory effect by inducing the polarization of macrophage to the M2 phenotype. Finally, when applied to a diabetic skin wound model, the M-sheet displays an accelerated wound healing rate and enhances re-epithelialization, collagen synthesis, and angiogenesis. It suggests that the M-sheet is a simple and portable system for the spontaneous generation of electrical stimulation and has great potential to be used in the practical wound and other tissue engineering applications.

Application of Strain Engineering in Solar Cells

Application of Strain Engineering in Solar Cells

Comparative performance analysis of mussel-inspired polydopamine, polynorepinephrine, and poly-α-methyl norepinephrine in electrochemical biosensors.

Polydopamine (PDA) has garnered significant interest for applications in biosensors, drug delivery, and tissue engineering. However, similar polycatecholamines like polynorepinephrine (PNE) with additional hydroxyl groups and poly-α-methylnorepinephrine (PAMN) with additional hydroxyl and methyl groups remain unexplored in the biosensing domain. This research introduces three innovative biosensing platforms composed of ternary nanocomposite based on reduced graphene oxide (RGO), gold nanoparticles(Au NPs), and three sister polycatecholamine compounds (PDA, PNE, and PAMN). The study compares and evaluates the performance of the three biosensing systems for the ultrasensitive detection of Mycobacterium tuberculosis (MTB). The formation of the nanocomposites was meticulously examined through UV-Visible, Raman, XRD, and FT-IR studies with FE-SEM and HR-TEM analysis. Cyclic voltammetry and differential pulse voltammetry measurements were also performed to determine the electrochemical characteristics of the modified electrodes. Electrochemical biosensing experiments reveal that the RGO-PDA-Au, RGO-PNE-Au, and RGO-PAMN-Au-based biosensors detected target DNA up to a broad detection range of 0.1 × 10-8 to 0.1 × 10-18M, with a low detection limit (LOD) of 0.1 × 10-18, 0.1 × 10-16, and 0.1 × 10-17M, respectively. The bioelectrodes were proved to be highly selective with excellent sensitivities of 3.62 × 10-4mAM-1 (PDA), 7.08 × 10-4mAM-1 (PNE), and 6.03 × 10-4mAM-1 (PAMN). This study pioneers the exploration of two novel mussel-inspired polycatecholamines in biosensors, opening avenues for functional nanocoatings that could drive further advancements in this field.

Unsteady MHD‐radiative thin film flow with heat transfer over a stretching surface in porous media

AbstractThis study conducts a computational analysis to explore how magnetic fields, radiation, heat, and mass transfer collectively influence a horizontal stretching sheet within a porous medium. The research focuses on elucidating the dynamics of thin film flow through the formulation of time‐dependent equations and subsequent transformation of fluid flow equations into ordinary differential equations via similarity transformation. The numerical solution is attained employing the Runge–Kutta fourth‐order method coupled with a shooting technique. MATLAB software is utilized to generate graphs and numerical values, offering a detailed representation of engineering‐relevant physical quantities in tabular form. The investigation revealed notable trends associated with varying parameters. Increasing unsteadiness parameters lead to a reduction in velocity, temperature, and concentration fields, while the temperature distribution demonstrates a positive correlation with radiation parameters. Moreover, elevated Prandtl numbers and unsteadiness parameters correspond to augmented heat and mass flux, respectively. Of particular significance is the observed heightened heat transfer rate during the transition from a Prandtl number of 1 (representing air) to 2 (representing oil), alongside an increased mass transfer rate with the escalation in Schmidt number from 0.62 (representing hydrogen) to 0.78 (representing ammonia). A comparative analysis of the numerical findings with existing literature demonstrates excellent agreement, affirming the validity and relevance of the present study. These insights offer valuable implications for understanding and optimizing heat and mass transfer processes in porous media, with potential applications in various engineering and scientific domains.

Development of 3D Printable Gelatin Methacryloyl/Chondroitin Sulfate/Hyaluronic Acid Hydrogels as Implantable Scaffolds

The development of biomaterials tailored for various tissue engineering applications has been increasingly researched in recent years; however, stimulating cells to synthesise the extracellular matrix (ECM) is still a significant challenge. In this study, we investigate the use of ECM-like hydrogel materials composed of Gelatin methacryloyl (GelMA) and glycosaminoglycans (GAG), such as hyaluronic acid (HA) and chondroitin sulphate (CS), to provide a biomimetic environment for tissue repair. These hydrogels are fully characterised in terms of physico-chemical properties, including compression, swelling behaviour, rheological behaviour and via 3D printing trials. Furthermore, porous scaffolds were developed through freeze drying, producing a scaffold morphology that better promotes cell proliferation, as shown by in vitro analysis with fibroblast cells. We show that after cell seeding, freeze-dried hydrogels resulted in significantly greater amounts of DNA by day 7 compared to the GelMA hydrogel. Furthermore, freeze-dried constructs containing HA or HA/CS were found to have a significantly higher metabolic activity than GelMA alone.

Ramification of Hall effects in a non-Newtonian model past an inclined microchannel with slip and convective boundary conditions

Abstract Many applications, including micro air vehicles, automotive, aerospace, refrigeration, mechanical–electromechanical systems, electronic device cooling, and micro heat exchanger systems, can be used to determine the heat flow in microchannels. Regarding engineering applications, heat flow optimization discusses the role of entropy production minimization. Therefore, this work explores new facets of entropy production in fully developed Carreau fluid heat transport in an inclined microchannel considering exponential space/temperature dependence, radiative heat flux, and Joule heating. The Carreau fluid model’s rheological properties are taken into account. Additionally, the influence of Hall slip velocity and convective boundary conditions is considered. Using appropriate transformation constraints, the governing equations are transformed into a system of ordinary differential equations, which are then numerically solved using the fourth- and fifth-order Runge–Kutta–Fehlberg method. Graphs illustrate a significant discussion of physical parameters on production of entropy, Bejan number, thermal field, and velocity. Our findings established that there is a dual impact of entropy generation for the exponential space/temperature-dependent, radiation parameter, Hall parameter, Weissenberg number, and velocity slip parameter. The Bejan number decreased with the Hall current and the Weissenberg number, and it enhanced with exponential space/temperature dependent. The convection constraint maximizes the entropy at the channel walls. The results are compared with exact solutions, which show excellent agreement.

Efficient pathway-driven scyllo-inositol production from myo-inositol using thermophilic cells and mesophilic inositol dehydrogenases: a novel strategy for pathway control.

Enzyme cocktails are commonly employed for cell-free chemical synthesis; however, their preparation involves cumbersome processes. This study affirms that mesophilic enzymes in thermophilic crude extracts can function as specific catalysts at moderate temperatures, akin to enzyme cocktails. The catalyst was prepared by permeabilizing cells without the need for concentration, extraction, or purification processes; hence, its preparation was considerably simpler compared with conventional methods for enzyme cocktails. This approach was employed to produce pure scyllo-inositol from an economical substrate. Notably, this marks the first large-scale preparation of pure scyllo-inositol, holding potential pharmaceutical significance as scyllo-inositol serves as a promising agent for certain diseases but is currently expensive. Moreover, this approach holds promise for application in pathway engineering within living cells. The envisioned pathway is designed without chromosomal modification and is simply regulated by switching culture temperatures. Consequently, this study introduces a novel platform for both whole-cell and cell-free synthetic systems.

Development of surface‐treated poly(lactic acid)/zinc oxide biocomposites for 3D printing in bone tissue engineering

AbstractThe increase in bone fractures has been driving the development of materials for bone repair with better mechanical and biological properties. This work reports the development of poly (lactic acid) (PLA)‐zinc oxide (ZnO) biocomposites for 3D printing of scaffolds to be applied in bone tissue engineering. The ZnO surface was functionalized with maleic anhydride (ZnOMA) by applying radio frequency plasma treatment as an alternative to control the catalytic effects of ZnO on the degradation of the PLA during the molten state processing. PLA and ZnOMA powders were processed using a heated internal mixer and the resulted biocomposites were used to manufacture scaffolds by 3D printing. The scaffolds were characterized by their rheological, thermal, microstructural, mechanical, and biological properties. Compositions containing ZnOMA presented higher viscosities, evidencing the control of degradation by surface functionalization, and achieved an elastic modulus near 1 GPa, suitable for bone applications, unlike the untreated samples. In relation to cell functions, PLA‐ZnOMA scaffolds exhibited cell viabilities at 160%, compared to 50% for untreated samples and stimulated mesenchymal stem cells toward osteoblast. Therefore, ZnO's negative thermal degradation effect on PLA was successfully overcome using plasma functionalization, enabling the 3D printing of bioactive scaffolds with great potential for application in tissue engineering.

Experimental Study On Bubble Pairs And Induced Flow Fields Using Tomographic Particle Image Velocimetry

Gas-liquid two-phase flows, such as bubbly flows, are widely used across various engineering and military applications due to their distinctive fluid dynamics. This study utilizes advanced imaging techniques, including shadowgraphy and laser-induced fluorescence tomographic particle image velocimetry (LIF-TPIV), to provide a quantitative analysis of bubble motions and the resulting flow fields. We systematically investigate the effects of orifice distances (s) set at 10, 15, 20, and 25 mm to assess the impact of spacing on bubble behavior and interactions. Our findings indicate that at orifice distances of 20 mm or less, the proximity of bubbles facilitates interactions, promoting dynamic bubble behaviors. In contrast, at distances greater than 25 mm, interactions become markedly weaker, leading to increased separation between bubbles during their free oscillation stages. This weak interaction directly influences the characteristics of bubble-induced flow fields. As orifice spacing increases, there is a noticeable decrease in the velocity of the flow field between bubbles, particularly noticeable at spacings of 20 mm and above. At these larger spacings, a low-velocity zone develops between the bubbles at higher heights, which, according to Bernoulli's principle, corresponds to a high-pressure area. This high pressure contributes to a reduction in bubble volume with increasing orifice spacing. Furthermore, the intensity of wake vortices between two bubbles is observed to be highest at the smallest spacing of 10 mm, closely resembling the flow structure characteristic of a single rising bubble. For spacings of 15 and 20 mm, the induced flow fields of the bubbles continue to interact significantly. However, at a spacing of 25 mm, the flow fields appear to function independently, suggesting a threshold beyond which bubble interactions stop to significantly affect their surrounding fluid environments. These findings are helpful for comprehending the two-phase flow dynamics, particularly in multi-orifices bubbly flow.

Corrosion suppression and strengthening of the Al-10Zn alloy by adding silica nanorods

Aluminum alloys have been widely studied because of their current engineering applications. Due to their high strength and lightweight, cracking can easily initiate on their surface, deteriorating their overall functional and structural properties and causing environmental attacks. The current study highlights the significant influence of incorporating 1 wt% silica nanostructure in aluminum-10 zinc alloys. The characteristics of the composites were examined using Vickers hardness, tensile, and electrochemical testing (OCP, Tafel, and EIS) at various artificial aging temperatures (423, 443, and 463 K). Silica nanorods may achieve ultrafine grains, increase hardness by up to 13.8%, increase σUTS values by up to 79% at 443 K, and improve corrosion rate by up to 89.4%, surpassing Al-10 Zn bulk metallics. We demonstrate that silica nanorods contribute to the creation of a superior nanocomposite that not only limits failure events under loading but also resists corrosion. Our findings suggest that silica nanocomposite can produce unique features for use in a variety of automotive, construction, and aerospace applications. This improvement can be attributed mainly to the large surface area of nano-silica particles, which alters the Al matrix. Microstructural, mechanical, and electrochemical studies revealed that the effects of structure refinement were dependent on nano-silica.

Effect of microcapsules’ mechanical stability on the encapsulated cells’ behavior

Stem cell microencapsulation offers immunoprotection, utilizing natural polymers such as sodium alginate (SA), chitosan, and derivatives such as trimethyl chitosan (TMC). Additive minerals improve microcapsule properties and cell differentiation. Layering increases mechanical strength and shields cells from the host’s immune system. This study explores the impact of incorporating nano-hydroxyapatite (nHA) and graphene oxide (GO) into the three-layer alginate–TMC–alginate microcapsules housing human adipose mesenchymal stem cells (haMSCs). The experimental design focused on optimizing the mechanical stability, with the ideal GO and nHA contents identified as 0.81% and 34% w/w, respectively. Rheological analysis revealed enhanced mechanical consistency, evidenced by higher storage modulus and lower loss factor in the optimized sample. Viability of the microencapsulated haMSCs, assessed through acridine orange/propidium iodide staining and MTT assays, affirmed the nontoxic nature of the microcapsules. Osteogenic potential was evaluated via alkaline phosphatase (ALP) activity measurement and immunocytochemistry staining. Microcapsules containing nHA and GO exhibited significantly elevated ALP activity, underscoring the pivotal role of these additives in enhancing mesenchymal stem cell differentiation. The highest osteocalcin deposition occurred in the optimized and SA/nHA 40% w/w groups in the differentiation medium. This comprehensive investigation highlights the potential of three-layer microcapsules with nHA and GO for bone tissue engineering applications.

Bingham and herschel-bulkley fluids flow regimes in rough-walled rock fractures

Flow of typical non-Newtonian fluids such as cement grouts can experience different regimes as the Reynolds number (Re) changes, understanding of which is important for design and operation of rock grouting in various rock engineering applications. Here, flow regimes of representative non-Newtonian fluids, i.e., Bingham and Herschel–Bulkley (H–B) fluids, are numerically investigated with experimental validations. Three tensile rock fracture surfaces originated from a fine-grained sandstone, a medium-grained sandstone and a medium-grained granite samples are used to create rough-walled fracture models with variable aperture structures. Flow of groundwater, Bingham and H–B fluids through these fractures is numerically simulated respectively, by solving the full mass and momentum conservation equations with the Re ranging from 0.01 to 1000. The regimes for these fluids flowing through the fractures are characterized. Laboratory flow tests are conducted in a cylindrical granite fracture sample to verify the characterized flow regimes. The results reveal important differences of flow regimes between Newtonian and non-Newtonian fluids. Specifically, the transmissivity for water flow is constant when Re is relatively small until the Re reaches certain critical values; the transmissivity for Bingham and H–B fluids flow increases with increasing Re until asymptotically reaches certain peak values, followed by a descending stage when Re is relatively large. The critical (water) and peak (Bingham and H–B fluids) values are affected by surface roughness, that is, a rougher surface results in smaller critical and peak values as well as greater discrepancies compared to the analytical solutions based on the smoothed parallel plates model. These results show that a peak or optimum transmissivity is achievable in a specific range of Re (Re = 10–100 for the fractures studied). This new finding can potentially help optimize the injection pressure or flow rate in rock grouting practices.

Towards Sustainable and Fire-Safe Thermosets Using Phosphorus-Containing Covalent Adaptable Networks.

Dynamic covalent chemistry is a promising strategy for developing recyclable thermosets and their carbon fiber reinforced composites, in line with the goal of green and sustainable development. However, a significant challenge lies in balancing the dynamic reversibility and the desired service performances, such as thermal, mechanical properties, and flame retardancy. It has hindered the broader application of dynamic materials beyond the initial proof of concept. This concept provides an overview of the current state of research on phosphorus-containing covalent adaptable networks (CANs), highlighting key designing and regulating principles for tailoring comprehensive properties including flame retardancy, mechanical and thermal properties, as well as dynamic behaviours such as malleability, reprocessability and degradability. Finally, new frontiers and opportunities in developing high-performance sustainable CANs-based thermosets and their carbon fiber composites for structural engineering applications are prospected.

Mechanical Characterization of GFRP Tiled Laminates for Structural Engineering Applications: Stiffness, Strength and Failure Mechanisms

This study investigates the mechanical properties of tiled laminates, frequently used in FRP bridges, and a completely new class of composites for which currently no experimental literature is available. In this paper, first a microscopic examination of laminates extracted from bridge deck flanges is performed, revealing complex multi-ply structures and tiled laminates in the transverse direction of the bridge deck. The subsequent fabrication of tiled laminates in the transverse (i.e., weak) and longitudinal (i.e., strong) span direction explores stiffness and strength characteristics depending on the stacking angle. It is observed that the stiffness in both directions is only slightly reduced with increasing stacking angles, reaching a maximum decrease of 10%, while the failure strength is significantly reduced, particularly with longitudinal tiling, dropping by approximately 70% for a 2° stacking angle. Transverse tiling demonstrates a more moderate 45% strength reduction due to the presence of some 90° plies. Given the small reduction in the stiffness and the fact that in many applications the design is mainly governed by serviceability (i.e., stiffness) requirements than strength, this strength reduction may be acceptable, considering other advantages of the concept. Additionally, this research sheds light on failure mechanisms, emphasizing the role of ply assembly in stress distribution and highlighting the importance of gradual ply ends in reducing strain concentrations. These findings provide valuable insights for optimizing tiled laminates in structural applications, ensuring their effective and reliable use.

Tailoring lithium intercalation pathway in 2D van der Waals heterostructure for high‐speed edge‐contacted floating‐gate transistor and artificial synapses

AbstractLocal phase transition in transition metal dichalcogenides (TMDCs) by lithium intercalation enables the fabrication of high‐quality contact interfaces in two‐dimensional (2D) electronic devices. However, controlling the intercalation of lithium is hitherto challenging in vertically stacked van der Waals heterostructures (vdWHs) due to the random diffusion of lithium ions in the hetero‐interface, which hinders their application for contact engineering of 2D vdWHs devices. Herein, a strategy to restrict the lithium intercalation pathway in vdWHs is developed by using surface‐permeation assisted intercalation while sealing all edges, based on which a high‐performance edge‐contact MoS2 vdWHs floating‐gate transistor is demonstrated. Our method avoids intercalation from edges that are prone to be random but intentionally promotes lithium intercalation from the top surface. The derived MoS2 floating‐gate transistor exhibits improved interface quality and significantly reduced subthreshold swing (SS) from >600 to 100 mV dec–1. In addition, ultrafast program/erase performance together with well‐distinguished 32 memory states are demonstrated, making it a promising candidate for low‐power artificial synapses. The study on controlling the lithium intercalation pathways in 2D vdWHs offers a viable route toward high‐performance 2D electronics for memory and neuromorphic computing purposes.image

Vanishing Friction: Progress toward Mechanistic Understanding and Potential Engineering Applications

Vanishing Friction: Progress toward Mechanistic Understanding and Potential Engineering Applications

Heat-treated alginate-polycaprolactone core-shell nanofibers by emulsion electrospinning process for biomedical applications

Fabrication of Core-shell nanofibrous mat which is a promising tool for a wide range of applications in tissue engineering can be developed using water in oil (W/O) or oil in water (O/W) emulsion electrospinning. In this study, for the first time, we fabricated an O/W emulsion-based electrospun core-shell mat using polycaprolactone (PCL) as a core and the blend solution of alginate (Alg) and polyethylene oxide (PEO) as shell material. To achieve a stable core-shell mat, firstly, Alg was modified with heat treatment to decrease the molecular weight of Alg. Then, to improve the chain flexibility of Alg, PEO as a second polymer was added to facilitate its electrospinnability. The different volume ratios of O/W were then fabricated by adding PCL to the Alg-PEO solution to find an optimized emulsion solution. The morphology, swelling, and porosity of the construct were evaluated. At the same time, the mechanical characteristic of fibers was evaluated in both dry and wet conditions. This study also examined cell-scaffold interactions to address the need for a scaffolding material to be suitable for tissue engineering and biomedical applications. Finally, the result exhibited a distinct core-shell structure with better mechanical properties compared to the Alg-PEO.

Security Control for a Fuzzy System under Dynamic Protocols and Cyber-Attacks with Engineering Applications

Security Control for a Fuzzy System under Dynamic Protocols and Cyber-Attacks with Engineering Applications

Gold Nanoparticles-Modified 2D Self-Assembled Amphiphilic Peptide Nanosheets with High Biocompatibility and Photothermal Therapy Efficiency.

Amphiphilic peptides have garnered significant attention due to their highly designable and self-assembling behaviors. Self-assembled peptides hold excellent potential in various fields such as biosensing, environmental monitoring, and drug delivery, owing to their remarkable biological, physical, and chemical properties. While nanomaterials formed by peptide self-assembly have found widespread use in biomedical applications, the development of 2D peptide nanosheets based on the self-assembly of amphiphilic peptides remains challenging in terms of rational design and morphology modulation. In this study, rationally designed amphiphilic peptide molecules are self-assembled into peptide nanosheets (PNS) under specific conditions to encapsulate gold nanoparticles (AuNPs), resulting in the formation of AuNPs/PNS hybrid materials with high photothermal conversion efficiency. The findings demonstrate that 2D PNS enhances the overall photothermal therapy effect of the nanohybrid materials due to their larger hosting area for AuNPs and higher biocompatibility. The well-designed amphiphilic peptides in this study offer insights into the structural design and functional modulation of self-assembled molecules. In addition, the constructed biomimetic-functional 2D inorganic/organic nanohybrid materials hold potential applications in biomedical engineering.

Optimized Electrophoretic Deposition of Chitosan/Mesoporous Glass Nanoparticles with Gentamicin on Titanium Implants: Enhancing Hemocompatibility and Antibacterial Activity.

Titanium-based implants have long been studied and used for applications in bone tissue engineering, thanks to their outstanding mechanical properties and appropriate biocompatibility. However, many implants struggle with osseointegration and attachment and can be vulnerable to the development of infections. In this work, we have developed a composite coating via electrophoretic deposition, which is both bioactive and antibacterial. Mesoporous bioactive glass particles with gentamicin were electrophoretically deposited onto a titanium substrate. In order to validate the hypothesis that the quantity of particles in the coatings is sufficiently high and uniform in each deposition process, an easy-to-use image processing algorithm was designed to minimize human dependence and ensure reproducible results. The addition of loaded mesoporous particles did not affect the good adhesion of the coating to the substrate although roughness was clearly enhanced. After 7 days of immersion, the composite coatings were almost dissolved and released, but phosphate-related compounds started to nucleate at the surface. With a simple and low-cost technique like electrophoretic deposition, and optimized stir and suspension times, we were able to synthesize a hemocompatible coating that significantly improves the antibacterial activity when compared to the bare substrate for both Gram-positive and Gram-negative bacteria.