Apatite Fission Track Data Research Articles

Long-lived topography of the Oaxacan Complex (southern Mexico) after the assembly of Pangea: Evidence from apatite fission-track dating

Understanding the exhumation history of ancient orogens is crucial for unraveling the tectonic and climatic forces that shape Earth's landscapes. Relict topography from ancient orogenic belts can persist on the surface for tens of millions of years, providing detritus to surrounding areas even without significant uplift events. This study examines the exhumation history of the Oaxacan Complex in southern Mexico, a Proterozoic peri-Gondwanan continental block located at the periphery of western equatorial Pangea during the l ate Paleozoic. This complex supplied detritus to extensional basins in southern Mexico throughout the Mesozoic and Cenozoic. We reinterpret existing apatite fission track (AFT) data from in situ samples of the Oaxacan Complex and add a set of detrital AFT data from modern sediments of the Peñoles River, which drains the northern Oaxacan Complex. The detrital AFT age distribution is continuous, ranging from ∼180 Ma to ∼50 Ma, without a predominant component age and showing a positive age-elevation correlation, suggesting a slow cooling history of the basement exposed in the drained area. QTQt thermal history modeling of the detrital AFT ages corroborates this slow cooling. Moreover, reinterpretation of in-situ AFT data from the literature confirms that the cooling history of the crustal block exposed in the northern Oaxacan Complex is characterized by a prolonged residence time in the Partial Annealing Zone of the apatite fission-track thermochronometer, spanning at least from the Triassic to the Paleogene. These results suggest that the Oaxacan Complex did not undergo any significant exhumation events after the Late Paleozoic assembly of Pangea, neither during the Triassic–Early Cretaceous rifting associated with Pangea breakup nor during development of the Late Cretaceous–Eocene Mexican Orogen. According to this scenario, we suggest that the post-collision relict topography of the Oaxacan Complex was likely sustained by isostatic rebound and lithological resistance, supplying sediment for tens of millions of years to the Mesozoic and Cenozoic basins of southern Mexico.

The Gulf of Suez rifting: implications from low-temperature thermochronology

ABSTRACT The Gulf of Suez is a continental rift basin that has been developed during the Oligocene-Miocene as a northern extension of the Red Sea rift system. The Oligo-Miocene rift-activated flanks are represented by exposures of the Neoproterozoic basement rocks of the Arabian-Nubian Shield. An additional thermal overprint (i.e. mantle plume) and the preceding tectono-thermal events that also affected the rifting dynamics and the uplift of its flanks remain uncertain. We here present thermochronological data for 20 basement samples collected from the Gabal Somr ElQaa area at the northwestern flank of the Gulf of Suez. The resulted zircon fission-track ages could be divided temporospatially into two groups: the Cambrian and the Silurian-Devonian with average ages of 503 ± 14 Ma and 407 ± 11 Ma, respectively. While apatite fission-track data reveal three different age groups of the Devonian-Carboniferous, the Permian-Triassic, and the Late Cretaceous, with average ages of 349 ± 10 Ma, 246 ± 6 Ma, and 81 ± 5 Ma, respectively. The modelled t-T histories indicate four cooling pulses during the Neoproterozoic, the Devonian-Carboniferous, the Cretaceous, and the Oligocene-Miocene. Integrating our findings with the regional tectonism and depositional records indicates that these cooling pulses could be attributed to synchronous activities of the post-accretion erosional event, the Variscan tectonic event, the Mid-Atlantic Ridge spreading, and the Gulf of Suez rifting. The Gulf of Suez is a passive rift, formed by a single and rapid rifting pulse within the framework of the Red Sea rift system. An additional east-southward far-field thermal overprint from the Arabian marginal plume partially affected the Suez rifting process. This thermal print affected only the rift’s southern portion of its eastern flank, causing syn-rift cooling ages, highly elevated rift flanks, and an increased heat flow. The western rift flank and the northern segment of the eastern flank are characterized by pre-rift cooling ages, modest rift flanks, and reduction in heat flow.

Unravelling the tectonic evolution of the Dinarides—Alps—Pannonian Basin transition zone: insights from structural analysis and low-temperature thermochronology from Ivanščica Mt., NW Croatia

A comprehensive study, including geological mapping, structural and thermochronological analysis, has been carried out on Ivanščica Mountain (NW Croatia), with the aim to reconstruct the tectonic history of the Dinarides, Southern/Eastern Alps and Pannonian Basin transitional zone. Implementation of structural and thermochronological methods enabled a subdivision of Ivanščica Mt. into two structural domains (from bottom to top): Ivanščica Parautochthon and Ivanščica Imbricate Fan and Cenozoic sedimentary cover. In addition, a sequence of deformational events in tectonic history of this transitional zone is proposed, comprising three extensional and four contractional events starting from Middle Triassic until present times. The two oldest deformational events indicate Middle Triassic (D1) and Early Jurassic (D2) extensional pulses and only occur in volcano-sedimentary successions of the Ivanščica Mt. The oldest contractional event (D3) is related to the obduction of a Neotethyan ophiolitic mélange over an Upper Triassic to Lower Cretaceous succession of the eastern margin of the Adriatic microplate, which resulted in thermal overprint of the Ivanščica Imbricate Fan structural domain in Berriasian—Valanginian times (~ 140 Ma). This event was soon followed by a second contractional event (D4), which resulted in thrusting and imbrication of the Adriatic passive margin successions together with previously emplaced ophiolitic mélange, thermal overprint of the footwall successions, fast exhumation and erosion. Apatite fission track data together with syn-tectonic deposits indicate an Hauterivian to Albian age of this D4 event (~ 133–100 Ma). These Mesozoic structures were dextrally rotated in post-Oligocene times and brought from the initially typically Dinaridic SE striking and SW verging structures to the recent SW striking and NW verging structures. The following extensional event (D5) is associated with the formation of SE striking and mostly NE dipping normal listric faults, and ENE striking dextral faults accommodating top-NE extension in the Pannonian Basin. Deformations were coupled with hanging wall sedimentation of Ottnangian to middle Badenian (middle Burdigalian to upper Langhian; ~ 18–14 Ma) syn-rift deposit as observed from the reflection seismic and well data. A short-lasting contraction (D6) was registered in the late Sarmatian (late Serravallian; ~ 12 Ma). The youngest documented deformational event (D7) resulted in reactivation of ENE striking dextral faults, formation of SE striking dextral faults as well as the formation of E to ENE trending folds and reverse faults. This event corresponds to late Pannonian (late Messinian; ~ 6 Ma) to Present NNW-SSE contraction driven by the indentation and counterclockwise rotation of Adriatic microplate. Recognized tectonic events and their timings indicate that Ivanščica was mainly affected by deformational phases related to the Mesozoic evolution of the Neotethys Ocean as well as Cenozoic opening and inversion of the Pannonian Basin. Therefore, the Mesozoic tectono-sedimentary evolution of Ivanščica Mountain proves the paleogeographic affiliation of its non-ophiolitic Mesozoic structural-stratigraphic entities to the Pre-Karst unit of the Dinarides.

Relating differential crustal architecture to passive margin evolution: A case study from the Colatina Fracture Zone (SE Brazil) using apatite fission‐track thermochronology

The Colatina Fracture Zone (CFZ) defines a distinct NNW–SSE‐oriented linear zone of fractures and brittle faults that represents an inherited weak zone in the current crustal structure of the (Pre)Cambrian Araçuaí Orogen. In the Early Cretaceous, the CFZ was reactivated during rifting of West Gondwana and subsequent opening of the South Atlantic Ocean, as evidenced by the emplacement of dykes along its structural network and the development of major depocentres of the Campos Basin in the offshore segments of the CFZ. Previous thermochronological studies have demonstrated that the CFZ was also rejuvenated during the drift phase of the South Atlantic. However, a number of questions regarding differential surface uplift and basement exhumation between the CFZ and its surrounding areas, such as the Doce River Valley (DRV), are still unresolved. In this study, we aim to investigate the CFZ as a distinctive structure in the tectonic rejuvenation of the passive margin of south‐east Brazil. Samples from the CFZ and the DRV were collected for apatite fission‐track (AFT) analyses. In the DRV, samples yield AFT central ages from 87 to 97 Ma with mean track lengths (MTL) from 12.6 to 13.3 μm. In contrast, in the CFZ, AFT central ages from 70 to 83 Ma with MTL values from 13.2 and 13.4 μm are obtained. The correlation between AFT age and elevation suggests that the tectonic development of these regions was markedly different and uncoupled. The thermal history models from the AFT data further constrain this differential evolution. On the one hand, thermal history modelling for the DRV indicates a slower and protracted cooling since the incipient Atlantic rifting in the Early Cretaceous. On the other hand, the models for CFZ reveal a rapid cooling phase between the Late Cretaceous to the Palaeocene. In the DRV, the observed basement cooling was most probably triggered by erosion of the uplifted rift shoulder generated by Gondwana break‐up. The more recent, Late Cretaceous–Palaeocene rock cooling, localized in the CFZ, was synchronous with a major phase of the Andean orogeny. This suggests that reactivations and erosional exhumation of the CFZ basement could be a consequence of far‐field propagation of intraplate compressional stress. The higher susceptibility of the CFZ to reactivating over its surroundings shows that structural inheritance is a key factor in the differential tectonic evolution of passive margins. Further research on the Late Cretaceous–Palaeocene reactivation in the CFZ's offshore extension may be crucial for the exploitation of hydrocarbons in the Campos and Espírito Santos basins.

Landform evolution of the Qilian Shan since 120 Ma revealed by apatite fission track data

The Cenozoic uplift of the Qilian Shan mountain range is intimately connected with the collision of the Indian and Eurasian plates, although the mechanism of deformation is still unclear due to the large distance between the Qilian Shan and the plate collision boundary. The first requirement if we are to determine this mechanism is to obtain the uplift process of the Qilian Shan range, which remains a matter of debate. We compiled apatite fission track data from previous studies of the Qilian Shan range to investigate the spatial and temporal disparities or similarities of the exhumation process. Most of the age-evolution profiles and thermo-modelling results show a low exhumation rate from 80 to 20 Ma, corresponding to shorter apatite fission track lengths, indicating a lower rate of erosion and lower relief across the whole Qilian Shan region. The results also reveal two stages of rapid exhumation: during the Cretaceous (120–80 Ma) and since the Miocene (20–0 Ma). The exhumation history of the Qilian Shan range shows no significant spatial difference and outward growth was limited at the southern and northern edges after 5 Ma. This temporal and spatial pattern for the exhumation of the Qilian Shan range suggests that there was probably no obvious uplift at the time of the initial collision of the Indian–Tibetan plates and support the proposal that the whole Qilian range has uplifted synchronously since 20 Ma.

Apatite Fission-Track Dating: A Comparative Study of Ages Obtained by the Automated Counting LA-ICP-MS and External Detector Methodologies

Abstract Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) in combination with developments in digital microscopy, image analysis, and computer software has allowed the implementation of an automated counting approach for the apatite fission-track (AFT) analysis. We refer to this approach as the “automated counting-LA-ICP-MS” (ACLA) method. Two major components comprise the ACLA method: (i) the digital counting of spontaneous tracks performed on high-resolution images captured from apatite grains and (ii) the measurement of 238U content in apatite by LA-ICP-MS. This study includes ACLA analyses from Fish Canyon Tuff (FCT) and Durango apatite standard crystals. Furthermore, a comparative age study between the ACLA and conventional external detector method (EDM) strategies was performed on a set of thirteen granitoid samples from northwestern Mexico and four granitic samples from the eastern Dharwar craton (EDC), India. ACLA analyses on FCT yielded an AFT age of 28.1 ± 0.6 (1σ) and 28.8 ± 1.1 (1σ) Ma for Durango apatite, whereas reported EDM ages are 27.5 ± 0.5 and 31.4 ± 0.5 Ma, respectively. Calculated AFT ages using the ACLA method from northwestern Mexico samples range from 11.1 ± 1.1 to 42.0 ± 3.6 Ma (EDM ages range from 10.0 ± 0.8 to 54.0 ± 3.0 Ma), whereas AFT ages from the EDC samples range from 147 ± 3.1 to 220.5 ± 12.5 Ma (EDM ages range from 120.9 ± 4.5 to 197.1 ± 19.4 Ma). Based on a statistical comparison with ages previously determined by the conventional EDM on the same samples and considering their 2σ uncertainties, these ages are in good agreement.

Cretaceous-Cenozoic cooling history of central-northern Tibet: Insights from the fission track thermochronology of detrital apatite from sediments of the Tuotuohe Basin

Deciphering the interactions between tectonic and exhumation processes in the Tanggula Mountains (central-northern Tibetan Plateau) can provide insights into the processes of the Tibetan plateau uplift and its geomorphic evolution. In this study, we present new detrital apatite fission track (AFT) data from Cenozoic sediments of the Tuotuohe Basin (northeastern part of the Qiangtang terrane) and its periphery (including the Tanggula Mountains), with the aim to reconstruct the cooling history of the Tanggula Mountains during the Cretaceous and the Cenozoic era. Our results show that the provenance of detrital material evolved in the Tuotuohe Basin and highlight that previously deposited sediments were recycled into the Tuotuohe Basin at ∼ 27.5 Ma. The data further outline that the Tanggula Mountains and the Tuotuohe Basin experienced three major phases of tectonic uplift and exhumation: 122–106, 65–54, and 44–35 Ma. These exhumation-induced cooling phases might be related with three phases of primary tectonic activity, i.e., the collision between the Qiangtang and Lhasa terranes (central part of the Tibetan Plateau) that started during the Early Cretaceous, the collision of the Indian and Eurasian plates in the Early Cenozoic and finally, the “hard collision (the Indian and Eurasian continents)” that occurred during the Early Eocene–Oligocene.

Constraining Displacement Magnitude on Crustal‐Scale Extensional Faults Using Thermochronology Combined With Flexural‐Kinematic and Thermal‐Kinematic Modeling: An Example From the Teton Fault, Wyoming, USA

AbstractConstraining the geometry and displacement of crustal‐scale normal faults has historically been challenging, owing to difficulties with geophysical imaging and inability to identify precise cut‐offs at depth. Using a modified workflow previously applied to contractional systems, flexural‐kinematic (Move) and thermal‐kinematic (Pecube) models are integrated with apatite (U‐Th)/He (AHe) and apatite fission track (AFT) data from Teton footwall transects to constrain total Teton fault displacement (Dmax). Models with slip onset at ∼10 Ma and flexure parameters that best match the observed Teton flexural profile require Dmax > 8 km to produce young (<10 Ma) AHe ages observed at low elevation footwall positions in the Tetons. For the same slip onset, models with Dmax of 11–13 km provide the best match to observed AHe data, but displacements ≥16 km are required to produce observed AFT ages (13.6–12.0 Ma) at low elevations. A more complex model with slow slip onset at ∼25 Ma followed by faster slip at ∼10 Ma yields a good match between modeled and observed AHe ages at a Dmax of 13–15 km. However, this model predicts low elevation AFT ages 6–8 Ma older than observed ages, even at Dmax values of 16–17 km. Based on this analysis and integration with previous studies, we propose a unified evolution wherein the Teton fault likely experienced 11–13 km of Miocene‐recent displacement, with AFT data likely indicating a pre‐to early Miocene cooling history. Importantly, this study highlights the utility of using integrated flexural‐ and thermal‐kinematic models to resolve displacement histories in extensional systems.

Understanding the burial history and the hydrocarbon potential of the late Paleozoic Claromecó foreland Basin (Southwestern Gondwana, Argentina) by combining organic geochemistry, organic petrology, and thermal modeling

The Claromecó foreland Basin (Carboniferous–Permian; southern Buenos Aires province, Argentina) is key to understanding the paleotectonic evolution of the southwestern Gondwana margin and is relevant to energy resource exploration. This study reconstructs the thermal and burial history of the Claromecó Basin by integrating geochemical data, organic petrology, and thermal modeling techniques. Cores samples of the Tunas Formation (Pillahuincó Group, Early Permian) were studied. A 1D thermal model was constructed, calibrated with vitrinite reflectance measurements (VRo %), and corroborated with fluid inclusion and apatite fission track data from previous studies. Rock-Eval pyrolysis results show TOC% values ranging from 0.13 to 60.35 wt%. The Hydrogen index (HI < 50 mg HC/g TOC) and Oxygen index (OI < 50 mg CO2/g TOC) indicate the dominance of Type III and Type IV kerogens, most likely resulting from the thermal maturation of an original Type III kerogen. Petrologic observations confirm the presence of macerals from the inertinite group, as well as minor amounts of vitrinite and liptinite. The Tmax displays a temperature range mostly from 460 to 610 °C. The VRo % values range from 1.5 to 2.0%. Geochemical data combined with VRo % measurements confirm a late catagenesis to metagenesis stage within the wet to dry gas window for coals and organic-rich strata.In order to constrain the thermal evolution of the basin infill, different scenarios were tested by varying the heat flow and the missing section thickness associated with the uplift and erosion of the basin (Permian–Cenozoic unconformity). The best calibration results were obtained with an erosion thickness of 3000 up to 4200 m and paleo heat flow peaks of either 60 or 80 mW/m2 during the Lower Permian–Lower Cretaceous. The Tunas Formation was deposited and buried during the Permian–Triassic (Gondwanides Orogeny phase), reaching a maximum temperature of 180 °C. The results obtained by combining geochemical analysis, organic petrology, and thermal modeling techniques indicate that the coal beds of the Tunas Formation could have a current potential as gas-prone source rocks. Despite that, the hydrocarbon generation capacity of coal levels is currently low due to the high percentage of residual (Type IV) kerogen. Further research could help clarify if the hydrocarbons potentially expelled by these source rocks have been lost due to migration or could be trapped somewhere in the basin.

Mеsozoic Tectonothermal Evolution of the Zagan Metamorphic Core Complex in Western Transbaikalia: 40Ar/39Ar and FTA Dating

Abstract A model of tectonothermal evolution of the Zagan metamorphic core complex (MCC) based on the new data from 40Ar/39Ar dating of amphibole, mica, and apatite fission-track dating is discussed. A relationship with the long-range impact of processes from the collision of the North China (Amurian–North China) block with the Siberian continent in the Mesozoic era is proposed. The Zagan MСС was formed in the Cretaceous period on the southern flank of a high mountain uplift of Western Transbaikalia, composed of late Paleozoic granitoids of the Angara–Vitim batholith. According to 40Ar/39Ar dating of amphiboles and micas from the mylonite zone, the active development time of the Zagan MCC corresponds to the early Cretaceous epoch (131, 114 Ma). The tectonic exposure of the core from about 15 km to the depths of about 10 km occurred at a rate of tectonic erosion of 0.4–0.3 mm/year as a result of post-collisional extension of the Mongol–Okhotsk orogen. Apatite fission-track dating shows that further exhumation and cooling of the rocks to about 3 km occurred in the lower-upper Cretaceous epoch (112, 87 Ma). The erosional denudation rate was about 0.3 mm/year.MCC- metamorphic core complexes, AFT- apatite fission-track

Timing and Kinematics of late Cenozoic Strike-slip Faults in the Western Tibetan Plateau: New Constraints from Provenance Analysis and Detrital Thermochronology

The activities of the three large strike-slip fault systems—the Karakoram, the Karakax, and the Longmu Co-Guozha Co faults—located in the western Tibetan Plateau have induced the intense exhumation of the Karakoram and the southern Western Kunlun ranges. However, the histories of these faults remain debated or loosely constrained, partly due to the restricted access to bedrock samples and associated comprehensive analyses. The application of detrital provenance analysis and detrital thermochronology to sediments can provide valuable information on the locations, crystallization timing, and exhumation of the source terranes of the sediments, thereby shedding light on tectonic histories. This study utilizes modern fluvial sand to obtain exhumation information on the Karakoram and the southern Western Kunlun ranges and to reconstruct the history of the major faults. We achieve this through provenance analysis (heavy-mineral analysis and detrital zircon UPb dating) and detrital apatite fission-track dating. Our results reveal widespread Paleogene rock exhumation across the western Tibetan Plateau and focused mid-Miocene (ca. 15–12 Ma) exhumation along the Karakoram and the southern Western Kunlun ranges. Moreover, the Karakoram Range experienced renewed exhumation at ca. 7 Ma. Through an integration of our results and regional geological evidence, we suggest that the focused mid-Miocene exhumation reflects the initiation of the Karakoram and the Karakax faults; the subsequent ca. 7 Ma exhumation episode of the Karakoram Range indicates a regional kinematic reorganization due to the initiation of the Longmu Co-Guozha Co Fault. We propose that the middle and late Miocene strike-slip faulting in the western Tibetan Plateau was driven by the oblique underthrusting of the Indian lithosphere.

Geochemical and geochronologic evidence for a contiguous northeastern Wyoming Province

The extent and nature of the Wyoming Province, an Archean craton in southwestern Laurentia, are poorly understood due to limited exposure between spatially isolated basement-cored uplifts. This lack of exposure has led to debate about whether the northeastern Wyoming Province is underlain by contiguous Archean crust or Proterozoic rocks and suture zone associated with the Trans-Hudson orogeny. To assess these models we analyzed samples recovered from drill cores in the buried northeastern Wyoming Province that straddle the proposed Proterozoic suture. Whole-rock geochemical and Nd-Pb-O isotopic data suggest the rocks formed by partial melting of > 3.5 Ga hydrated mafic to tonalitic sources similar to elsewhere in the northern Wyoming Province. Zircon U-Pb dates record Mesoarchean magmatism and metamorphism (3.0–2.8 Ga). Published whole-rock Rb-Sr, hornblende and biotite K-Ar, and apatite fission track dates suggest these rocks have not been heated above 300 °C since 2.5–2.1 Ga. Geophysical potential field data are consistent across northeastern Wyoming contrasting with major discontinuities associated with documented Proterozoic orogens on all other margins of the Wyoming Province. Hence, geochemical, isotopic, and geochronologic data along with geophysical imaging can be most simply interpreted in terms of continuous Archean crust in the northeastern Wyoming Province. A geophysically-imaged reflector east of the Bighorn Mountains may juxtapose Archean terranes with similar ages and sources, similar to the boundary between the Montana metasedimentary terrane and Beartooth-Bighorn magmatic zone in the northwestern Wyoming Province. This work emphasizes the value of integrating geologic and geophysical constraints to constrain Archean provinces and their tectonic evolution.

Compilation of Apatite Fission-Track Data from the Northeast Atlantic Realm: A Jigsaw Puzzle with Missing Pieces

Abstract The northeast (NE) Atlantic is one of the best-studied geological regions in the world, incorporating a wide array of geological phenomena including extensional tectonism, passive margin development, orogenesis, and breakup-related volcanism. Apatite fission-track (AFT) thermochronology has been an important tool in studying the onshore evolution of the NE Atlantic for several decades. Unfortunately, large regional-scale studies are rare, making it difficult to study geological processes across the whole region. In this work, a compilation of published AFT data is presented from across Fennoscandia, the British Isles, East Greenland, and Svalbard, with the goal of providing an accessible overview of the data and how this vast body of work has improved our understanding of the region’s evolution. Alongside a review of previous literature, interpolated maps of fission track age and mean track length (MTL) highlight regional trends in the data that may result from major first-order processes and areas of low sample density that should be targeted for future study. Additionally, in the absence of metadata required for thermal history modeling, apparent exhumation rate estimates are calculated from available elevation profiles and the timing of major exhumation events inferred from “boomerang plots” of fission track ages against MTL values. Across Fennoscandia, data suggests that the opening of the NE Atlantic and exhumation of the margin have clearly played a major role in the thermal history of the upper crust. The remaining areas of Britain, Ireland, East Greenland, and Svalbard all present more complex trends consistent with a combination of the NE Atlantic’s opening and the interplay between specific bedrock geology of sampling sites and localized geological processes. Areas of low sample density include southern Britain, NE Britain, southeast Greenland, southern Svalbard, and Eastern Fennoscandia, each of which provides the natural laboratory required to answer many unresolved questions.

Compilation of Apatite Fission-Track Data from the Northeast Atlantic Realm: A Jigsaw Puzzle with Missing Pieces

Abstract The northeast (NE) Atlantic is one of the best-studied geological regions in the world, incorporating a wide array of geological phenomena including extensional tectonism, passive margin development, orogenesis, and breakup-related volcanism. Apatite fission-track (AFT) thermochronology has been an important tool in studying the onshore evolution of the NE Atlantic for several decades. Unfortunately, large regional-scale studies are rare, making it difficult to study geological processes across the whole region. In this work, a compilation of published AFT data is presented from across Fennoscandia, the British Isles, East Greenland, and Svalbard, with the goal of providing an accessible overview of the data and how this vast body of work has improved our understanding of the region’s evolution. Alongside a review of previous literature, interpolated maps of fission track age and mean track length (MTL) highlight regional trends in the data that may result from major first-order processes and areas of low sample density that should be targeted for future study. Additionally, in the absence of metadata required for thermal history modeling, apparent exhumation rate estimates are calculated from available elevation profiles and the timing of major exhumation events inferred from “boomerang plots” of fission track ages against MTL values. Across Fennoscandia, data suggests that the opening of the NE Atlantic and exhumation of the margin have clearly played a major role in the thermal history of the upper crust. The remaining areas of Britain, Ireland, East Greenland, and Svalbard all present more complex trends consistent with a combination of the NE Atlantic’s opening and the interplay between specific bedrock geology of sampling sites and localized geological processes. Areas of low sample density include southern Britain, NE Britain, southeast Greenland, southern Svalbard, and Eastern Fennoscandia, each of which provides the natural laboratory required to answer many unresolved questions.

Segmentation of the Tashkurgan normal fault in the eastern Pamir: Insights from geomorphology and thermochronology and implications for fault-slip transfer

At the northwestern end of the India–Asia collision zone, in the eastern Pamir interior, the Kongur Shan extensional system extends for ∼250 km as a composite system of normal faults. As the southernmost segment of the extensional system, the Tashkurgan fault can be divided into a northern and southern segment by the intersection of the Tahman and Tashkurgan faults. To evaluate the tectonic activity along the Tashkurgan fault and explore the extensional characteristics of the southern Kongur Shan extensional system, we integrate geomorphologic analysis with thermochronologic data and modeling. Geomorphic indices, including local relief, normalized channel steepness index (ksn), and river χ-plots, show that the southern Tashkurgan fault is more active than the northern Tashkurgan fault. On the footwall of the northern Tashkurgan fault, most thermochronologic data, which include biotite 40Ar/39Ar (Arbt), zircon (U-Th)/He (ZHe), apatite fission track (AFT), and apatite (U-Th-Sm)/He (AHe) dates, record emplacement-related cooling, and only a few AHe dates possibly record exhumation of <2 km since ∼7 Ma ago. On the footwall of the southern Tashkurgan fault, almost all of the ZHe, AFT, and AHe dates record significant late Miocene to present exhumation; thus, we perform three-dimensional thermokinematic modeling for the normal slip along this fault segment. Modeling results indicate a probably constant slip rate on the southern Tashkurgan fault at a value of 1.4–1.5 mm/a, which corresponds to 6–7 km of both horizontal extension and footwall uplift since 6.5 Ma ago. All together, the geomorphic and thermochronologic evidences imply that the southern Tashkurgan fault is responsible for the ∼E–W extension along the southernmost portion of the Kongur Shan extensional system, while the northern fault segment plays a minor role in the extension. This result, combined with the previously published magnitude of extension along the southern Kongur Shan fault, indicates that the extension at any site along the southern Kongur Shan extensional system can be primarily attributed to normal faulting along a single border fault, which is a typical characteristic of an interbasin transfer zone with a transfer fault.

Multiple Uplift and Exhumation of the Southeastern Tibetan Plateau: Evidence from Low‐Temperature Thermochronology

AbstractSince the Cenozoic, the Tibetan Plateau has experienced large‐scale uplift and outgrowth due to the India–Asia collision. However, the mechanism and timing of these tectonic processes still remain debated. Here, using apatite fission track dating and inverse thermal modeling, we explore the mechanism of different phases of rapid cooling for different batholiths and intrusions in the southeastern Tibetan Plateau. In contrast to previous views, we find that the coeval granitic batholith exposed in the same tectonic zone experienced differential fast uplift in different sites, indicating that the present Tibetan Plateau was the result of differential uplift rather than the entire lithosphere uplift related to lithospheric collapse during Cenozoic times. In addition, we also suggest that the 5–2 Ma mantle‐related magmatism should be regarded as the critical trigger for the widely coeval cooling event in the southeastern Tibetan Plateau, because it led to the increase in atmospheric CO2 level and a hotter upper crust than before, which are efficient for suddenly fast rock weathering and erosion. Finally, we propose that the current landform of the southeastern Tibetan Plateau was the combined influences of tectonic and climate.

Apatite Fission Track Thermochronology of Granite from the Xiazhuang Uranium Ore Field, South China: Implications for Exhumation History and Ore Preservation

AbstractXiazhuang uranium ore field, located in the southern part of the Nanling Metallogenic Belt, is considered one of the largest granite‐related U regions in South China. In this paper, we contribute new apatite fission track data and thermal history modeling to constrain the exhumation history and evaluate preservation potential of the Xiazhuang Uranium ore field. Nine Triassic outcrop granite samples collected from different locations of Xiazhuang Uranium ore field yield AFT ages ranging from 43 to 24 Ma with similar mean confined fission track lengths ranging from 11.8 ± 2.0 to 12.9 ± 1.9 μm and Dpar values between 1.01 and 1.51 μm. The robustness time‐temperature reconstructions of samples from the hanging wall of Huangpi fault show that the Xiazhuang Uranium ore field experienced a time of monotonous and slow cooling starting from middle Paleocene to middle Miocene (∼60–10 Ma), followed by relatively rapid exhumation in the late Miocene (∼10–5 Ma) and nearly thermal stability in the Pliocene–Quaternary (∼5–0 Ma). The amount of exhumation after U mineralization since the Middle Paleogene was estimated as ∼4.3 ± 1.8 km according to the integrated thermal history model. Previous studies indicate that the ore‐forming ages of U deposits in the Xiazhuang ore field are mainly before Middle Paleocene and the mineralization depths are more than 4.4 ± 1.2 km. Therefore, the exhumation history since middle Paleocene plays important roles in the preservation of the Xiazhuang Uranium ore field.

New insights into Cenozoic evolution of the Shijiutuo uplift, Bohai Bay basin, China: Constraints from apatite fission track analysis and seismic data

The Shijiutuo Uplift within the Bohai Bay Basin(BBB)has experienced a complex evolutionary history since the Cenozoic. Studies of the Cenozoic evolution of the Shijiutuo Uplift are important for basin tectonics and petroleum geology. The formation of uplifts in rift basins is generally controlled by regional tectonic event and fault-block tilting. In this study, apatite fission track (AFT) data from fourteen samples and seismic data analysis were used to study the processes of regional uplift and fault-block tilting. We further investigated the Cenozoic evolution and formation mechanism of the Shijiutuo Uplift. The results indicated that the Shijiutuo Uplift experienced a two-phase differential tectonic uplift and erosion history (1) Widespread rapid uplift and erosion during the early Cenozoic (65–55 Ma) (2) Widespread uplift and erosion from 40 Ma to 16 Ma. The uplift and erosion substages of 40–38 Ma and 26–16 Ma were mainly caused by regional uplift, whereas those of 38–26 Ma resulted from fault-block tilting. Since the end of the third member from the Eocene Shahejie Formation, the Shijiutuo Uplift began to rise, causing the greater Bozhong Depression to be separated into the independent Qinnan and Bozhong Sags. These tectonic uplift and erosion events have a wide range of responses and regional dynamics in eastern China. The findings of this study will lead to a better understanding of the evolution and formation of uplifts within the BBB.

The McClure Mountain Syenite Apatite as a Potential Age Control Reference Material for LA‐ICP‐MS AFT and U‐Pb Double Dating

Apatite fission track (AFT) dating is now routinely performed using LA‐ICP‐MS, and U‐Pb age data are often acquired at the same time, allowing double dating of individual grains. Furthermore, additional geochemical data, such as REE mass fractions are readily acquired during the analysis. It is therefore of practical interest to identify a single material as a quality control on ages and composition. Here we present AFT and U‐Pb data for the McClure Mountain Syenite (MMS) apatite, already widely used as an age reference material by the U‐Pb community. We performed double dating on 238 grains, in thirteen measurement sessions over two years. The AFT data show remarkable reproducibility with an overall central age of 254.1 ± 5.1 Ma. The U‐Pb results agree with the reference age for individual sessions (and for all data together). The results show that that the McClure Mountain apatite is a valid quality control material for double dating, allowing the use of the same material for both methods. We also propose to extend the quality control using MMS to trace element measurements performed in conjunction AFT and U‐Pb dating.

Old detrital AFT ages from East Greenland do not require plateau erosion

Accurate estimates of past topography are required to reliably reconstruct past ice sheets to infer palaeoclimate. For this reason, understanding erosion rates across East Greenland is crucial to constrain landscape evolution driven by tectonics and climate-dependent erosion rates. Here we analyse published apatite fission-track (AFT) data to constrain the spatial pattern of AFT bedrock ages across the landscape. We compare these bedrock ages with published detrital distribution to highlight ambiguity in the pattern of erosion. In contrast to earlier work, we regress a simple model of exhumation pace through the bedrock ages such that age can vary as a function of both elevation and position. The resulting iso-age surfaces allow us to determine potential source areas for detrital AFT age distributions. We find that old ages observed in detrital distributions are just as likely to be sourced from low-elevation locations that are far from the coast as from high-elevation locations close to the coast. Additional data from lower temperature systems are thus required to make firm conclusions on landscape evolution in the region and distinguish between the two landscape-forming scenarios.