Antimicrobial Properties Research Articles

Development and characterization of bilayer chitosan/alginate cling film reinforced with essential oil based nanocomposite for red meat preservation

With a goal to finding suitable alternatives to plastic packaging in the food industry, we developed a multifunctional bio-based active packaging film to enhance the shelf life of red meat. A chitosan/alginate (Chi + Alg) bilayer film was developed through layer-by-layer (LBL) assembly and an active material i.e. lemongrass nanoemulsion with silver nanoparticles-based nanocomposite (NC1) was loaded into the alginate layer to improve the quality of the bio-based film (Chi + Alg + NC1). The Chi + Alg + NC1 film was characterized in terms of its microstructure, mechanical strength, thermal stability, and antimicrobial activity. Scanning electron microscopy (SEM) revealed a film (22.5 ± 1.44 μm thickness) with a smooth and even surface and a cross-sectional structure. The incorporation of NC1 improves the quality of the film by enhancing its mechanical strength and thermal stability. FT-IR spectra showed the successful interaction between chitosan and alginate in the LBL assembly and the incorporation of NC1 in the alginate layer. The red meat preservation test demonstrated that the shelf life improved when the meat was covered with the fabricated bio-based film. The color of the meat was retained for up to 7 days compared to that of the control (Chi alone and Chi + Alg). Additionally, a reduction in the microbial count in the Chi + Alg + NC1 film was observed, corroborating the shelf-life improvement. In addition to its inherent antimicrobial properties, NC1 induced hydrophilic properties to the film, which further aids in its antimicrobial activity against E. coli. These findings suggest that Chi + Alg + NC1 film could be a potent alternative to plastic packaging and can be used as a cling film to prolong the shelf life of red meat.

Development of multilayer composite film based on protein‐polysaccharides with the addition of onion waste extracts and their impact on the shallot quality

AbstractAt present, multilayer composite film is attractive in the production of biodegradable films due to its essential film properties. The current study mainly focused on overcoming the problems of poor water barrier and mechanical strength observed in monolayer films (SA‐CMC and G/SA‐CMC) made from gluten (G), sodium alginate (SA), and carboxymethylcellulose (CMC). The film was developed with the addition of onion waste extracts (OWEs), primarily from peel and stalk, to enhance functional properties. The multilayer composite film consists of three layers: an outer layer made of G, an inner layer made of SA, CMC, and a middle layer made of G/SA‐CMC. The developed composite film exhibited improved physical properties (thickness: 0.348–0.629 mm and moisture: 20.889%–21.403%), mechanical properties (tensile strength: 21.943–20.640 MPa), and barrier properties (WVP: 0.212–0.516 g/m.s.Pa × 10−14) compared to monolayer films (SA‐CMC and G/SA‐CMC). The addition of OWEs enhanced the multilayer film's phenolic (20.076 and 36.175 mgGAE/g) and antioxidant activity (73.850% and 42.667%). The study found that the multilayer control film had minimal changes in weight loss (9.75% ± 0.18%) and firmness (6.68 ± 0.64 N) compared to OWEs‐added films (9.93% ± 0.49–10.02% ± 0.14% and 6.61 ± 0.37 to 6.64 ± 0.18 N). However, fresh‐peeled shallot onion packed with control film exhibited higher bacterial counts (6.70 ± 0.42 CFU/g) and yeast and mold counts (5.08 ± 0.20 CFU/g) than those packed with the OWEs‐added film (6.49 ± 0.28–6.56 ± 0.27 CFU/g and 4.75 ± 0.18–4.89 ± 0.21 CFU/g), indicating that OWEs protect the onions from microbial degradation. Overall, the multilayer control film (without OWEs) showed better results for storing the fresh‐peeled shallot onion at 4°C for 21 days.Highlights Onion waste extracts have potent high antioxidant and antimicrobial properties Multilayer film's physical, mechanical, barrier, and functional properties improved Addition of onion waste extracts increased the film's antimicrobial activity Control film showed a better effect for storing fresh‐peeled shallot onion Developed film can store fresh‐peeled shallot onion for 21 days at 4°C.

Propolis in Human Health: Unraveling Chemistry, Applications, and Efficacy

The paper explores the diverse aspects of propolis, a resinous substance created by bees from botanical sources, presenting a comprehensive overview of its chemistry, applications, and efficacy in human health. Propolis, colloquially known as "bee glue," serves as a versatile material in hive construction and defense against diseases and predators. Its chemical composition, influenced by geographic origins, comprises a myriad of bioactive compounds, including flavonoids, phenolic acids, terpenoids, and more. The study delves into the pharmacological activities of propolis, emphasizing its antioxidant, antimicrobial, anti-inflammatory, and anticancer properties. Propolis exhibits a direct correlation between its biological activity and the quality of its chemical constituents. The antioxidant activity, attributed to flavonoids, plays a crucial role in mitigating oxidative stress and associated chronic inflammation. Furthermore, the paper discusses the therapeutic potential of propolis in various health conditions, such as diabetes mellitus, cardiovascular diseases, asthma, COPD, and wound healing. In diabetes, propolis shows promise in reducing blood glucose levels and insulin resistance. Its cardioprotective effects are linked to antioxidant compounds, addressing oxidative stress in cardiovascular diseases. Propolis demonstrates anti-allergic and anti-inflammatory effects in respiratory conditions, providing potential relief for asthma and COPD patients. Additionally, propolis accelerates wound healing through its immunomodulatory, antimicrobial, and antioxidant properties. In conclusion, propolis emerges as a natural resource with significant potential for human health, presenting a diverse array of bioactive compounds that contribute to its therapeutic efficacy across various medical conditions. The multifaceted nature of propolis makes it a subject of growing interest for further research and exploration in the field of medicine and healthcare.

Optimized UV-barrier carboxymethyl cellulose-based edible coatings reinforced with green synthesized ZnO-NPs for food packaging applications

AbstractThe widespread use of sodium carboxymethyl cellulose (CMC) in the production of edible coatings is returned to its biodegradable, biocompatible, and non-toxic nature. However, neat CMC edible coatings lack UV-shielding activity and have poor antimicrobial properties. This study aimed to develop a CMC-based coating with optimal UV-barrier properties by incorporating aloe vera (AV) and green synthesized zinc oxide nanoparticles (ZnO-NPs). The composition and synergistic effects of CMC, AV, and ZnO-NPs were optimized using central composite design to achieve the best UV-barrier properties. When using the optimized compositions of CMC (1.0 g), AV (3.0 g), and ZnO-NPs (5.0 wt%), the minimum UV-transmittance achieved was 4.75%. Fourier transform infra-red and wide-angle X-ray diffraction were used to confirm the interactions between the coating components. The incorporation of ZnO-NPs into CMC/AV was validated through surface morphology analysis via scanning electron microscopy and by examining the distribution of ZnO-NPs using transmission electron microscopy. CMC/AV/ZnO-NPs coatings showed excellent water barrier, mechanical, thermal, and antimicrobial properties when compared with the neat carboxymethyl cellulose coating. In addition, CMC/AV/ZnO-NPs coatings significantly resisted both mass loss and spoilage of green capsicum for a 15-day storage period. These results proved that the optimized coating could replace the plastic packaging candidates and be used potentially to preserve food products.

Some Highly Potent Nepalese Medicinal Plants with Antimicrobial Properties.

In recent years, microbial infections have emerged as a serious global health problem, necessitating the search for novel and effective treatments. Medicinal plants contain phytochemicals that can be used to prevent and treat various infections. Traditional medicinal practices have long relied on the healing properties of herbs, and Nepal is particularly rich in this knowledge. Bioactive compounds found in plants possess antibacterial, antifungal, and antiviral properties, making them a valuable resource for the fight against microbial infections. This review focuses on three medicinal plants native to Nepal, Amomum subulatum, Cymbopogon jwarancusa, and Cinnamomum glaucescens, which contain potent antimicrobial phytochemicals. The traditional uses, bioactive components, and biological activities of these plants are discussed, providing valuable insights into their potential as natural remedies to combat microbial infections.

Antimicrobial and aggregation properties of asymmetric gemini surfactants based on 1-(2-hydroxypropyl)-4-ethyl piperazine and alkyl bromides

Asymmetric gemini surfactants were synthesized by the quaternization reaction of 1-(2-hydroxypropyl)-4-ethyl piperazine with (C9, C10, C12, and C14) alkyl bromides. The surface tension of their aqueous solutions was determined by the Du Nouy ring method and the conductometric method of specific electrical conductivity. According to the concentration dependence graphs of surface tension and specific electrical conductivity, critical micelle concentration – CMC, degree of association of the counterion – β, surface area occupied by the head group of the surfactant – Amin, maximum surface excess concentration – Γmax, effectiveness or surface pressure –πCMC, adsorption efficiency – pC20 were calculated, and the change of these parameters depending on the length of the alkyl chain was determined. Simultaneously, variations in Gibbs free energies of micellization and adsorption processes were computed. The diameters of aggregates formed by asymmetric gemini surfactants in water were determined by the DLS method. Antimicrobial abilities of asymmetric gemini surfactants against gram positive and gram negative bacteria and fungi were defined by the disk diffusion method.

Cannabinoids from C. sativa L.: Systematic Review on Potential Pharmacological Effects against Infectious Diseases Downstream and Multidrug-Resistant Pathogens

Cannabis sativa L. has garnered attention as a potential source for new antimicrobial agents, particularly due to the increased prevalence of microbial resistance to conventional antimicrobials and the emergence of multidrug-resistant pathogens. This review, conducted according to the PRISMA 2020 statement, systematically analyzed the antimicrobial properties of C. sativa extracts and cannabinoids against various bacteria, fungi, viruses, and parasites. Data were collected from the scientific literature (102 papers) and clinical trials (5 studies) from 2014 to June 2024. Findings revealed that cannabinoids, especially CBD, demonstrate significant antimicrobial activity against Gram-positive bacteria like MRSA, Gram-negative bacteria such as Pseudomonas aeruginosa, various Candida species, SARS-CoV-2, and HIV. Additionally, CBD showed efficacy against parasitic infections like Echinococcus granulosus and Leishmania species. These results suggest that cannabinoids may represent a new class of antimicrobial agents with unique and diverse mechanisms of action, potentially effective in broad-spectrum therapies. This study highlights the urgent need for further research and standardized clinical trials to validate these findings and to develop cannabinoid-based treatments. The antimicrobial properties of C. sativa align with WHO priorities and support global health initiatives, offering promising avenues for addressing antimicrobial resistance and improving public health outcomes.

Antioxidant and antibacterial extracts from rambutan (Nephelium lappaceum) skins: Exploring the Potential of Transforming Agricultural Byproducts into Functional Supplements

Rambutan (Nephelium lappaceum L.) is a tropical fruit characterized by its oval shape and hairy skin, primarily valued for its juicy pulp. The peels, constituting 45% of the fruit’s weight, are a source of valuable compounds like geraniin, ellagic acid, and quercetin. These peels possess antimicrobial properties effective against various bacteria, making them suitable for food preservation and packaging. Additionally, rambutan extracts hold promise as supplements in animal feed, enhancing growth and reducing methane production. This research delves into the antioxidant and antimicrobial attributes of diverse rambutan varieties. The skin (exocarp) of rambutan fruits from three Costa Rican cultivars -Creole, Rongrein, and Yellow- were collected and processed. Total polyphenolic content (TPC), proanthocyanidins, antioxidant activity, geraniin content, and antimicrobial activity were determined for the three varieties. Also, proanthocyanidin-enriched fractions from rambutan extracts were generated and analyzed. The results revealed TPC and antioxidant activity variations among different rambutan varieties and harvest years. All rambutan extracts displayed antimicrobial activity. In conclusion, the research underscores the rich antioxidant content in rambutan peels, irrespective of the variety, and underscores their potential for use in both human and animal nutrition due to their chemical composition.

Ensuring Tree Protection, Growth and Sustainability by Microbial Isolates

Antimicrobial properties of the new strains of micro-organisms isolated from natural sources of various ecological niches in the Moscow region and the Republic of Tatarstan were studied. Antifungal activity of isolates was detected in a test culture of toxin-producing microscopic fungi that can cause animal and plant diseases: Aspergillus flavus, Candida albicans, Fusarium oxysporum and Penicillium spp. Of the 46 studied micro-organisms of genera Bacillus, Lactobacillus, Lactococcus and Streptomyces isolates, there are four strains (Bacillus subtilis, Lactobacillus plantarum, Propionibacterium freudenreichii and Streptomyces spp.) that showed an ability to produce biologically active metabolites with a pronounced antimicrobial potential against phytopathogenic fungi metabolites. Based on the selected four strains, a Bacterial product LRV composition has been created. Scots pine, pedunculate oak and small-leaved linden seedlings with single and double foliar treatment and Bacterial product LRV at a concentration of 10 mL/L led to an increase in the growth of the aboveground part by 31.8, 51.9 and 25.4%, respectively, and the underground part by 25.0, 37.2 and 25.7%, respectively, compared to the control. The weight of seedlings at the end of the study exceeded the control variant by an average of 26.0, 44.0 and 78.0%, respectively. Plant protection Bacterial product LRV use did not have a significant effect on the group of molds that caused the powdery mildew and Schütte disease damage to trees. The Biological product LRV provided plant protection from fungal diseases caused by Lophodermium pinastri Chev. and Microsphaera alphitoides.

Synergistic effect of GN-Ag NPs enhancing the efficient catalytic degradation of MB and CR by PDA@MMT composite hydrogel

A novel composite hydrogel prepared from polyacrylamide (PAM), polydopamine-modified montmorillonite (PDA@MMT), graphene and hydroxypropyl cellulose (HPC), loaded with Ag NPs, was prepared for the catalytic degradation of methylene blue (MB) and Congo red (CR) using in situ reduction. HPC significantly enhanced the dispersion of PDA@MMT within the hydrogel, endowing the hydrogel with excellent mechanical properties, with stress and strain of 1773 kPa and 4005 %, and elastic modulus and toughness of 43.4 kPa and 29.54 MJ/m3, respectively. The introduction of graphene (GN) increased the rate of electron transfer during the catalytic process and significantly improved the catalytic efficiency, with catalytic rate constants of 1.360 and 0.803 min−1 for MB and CR at 20 °C, respectively. The hydrogels were endowed with excellent antimicrobial properties due to the introduction of Ag NPs. In the future, this hydrogel is expected to play an important role in environmental pollution control.

Fabrication and Application of Tannin Double Quaternary Ammonium Salt/Polyvinyl Alcohol as Efficient Sterilization and Preservation Material for Food Packaging.

Food packaging films play a vital role in preserving and protecting food. The focus has gradually shifted to safety and sustainability in the preparation of functional food packaging materials. In this study, a bisquaternary ammonium salt of tannic acid (BQTA) was synthesized, and the bioplastics based on BQTA and polyvinyl alcohol (PVA) were created for packaging applications. The impact of BQTA on antibacterial effect, antioxidant capacity, opacity, ultraviolet (UV) protective activity, mechanical strength, thermal stability, and anti-fog of the resultant bioplastics was examined. In vitro antibacterial experiments confirmed that BQTA possesses excellent antimicrobial properties, and only a trace amount addition of BQTA in PVA composite film could inhibit about 100% of Escherichia coli and Staphylococcus aureus. Compared to BQTA/PVA bioplastics with pure PVA, the experiment findings demonstrate that BQTA/PVA bioplastics show strong antioxidant and UV protection action and the performance of fruit preservation. It also revealed a small improvement in thermal stability and tensile strength. The small water contact angle, even at low BQTA concentrations, gave BQTA/PVA bioplastics good anti-fog performance. Based on the findings, bioplastics of BQTA/PVA have the potential to be used to create packaging, and they can be applied as the second (inner) layer of the primary packaging to protect food freshness and nutrition due to their antioxidant activity and biocompatibility.

Photothermal and Antibacterial PDA@Ag/SerMA Microneedles for Promoting Diabetic Wound Repair.

Diabetic foot ulcer (DFU) is a common and severe complication of diabetes characterized by wound neuropathy, ischemia, and susceptibility to infection, making its treatment difficult. Dressings are commonly used in treating diabetic wounds; however, they have disadvantages, including lack of flexibility and mechanical strength, lack of coagulation activity, resistance to biodegradation, and low drug delivery efficiency. Developing more effective strategies for diabetic wound treatment has become a new focus. Microneedles (MN) can be used as a drug delivery platform for DFU wounds, allowing safe, effective, painless and minimally invasive medication administration through the skin. Herein, PDA@Ag/SerMA microneedles were prepared by combining the photothermal properties of polydopamine (PDA), the antimicrobial properties of argentum (Ag), and the ability of sericin methacryloyl (SerMA) to promote cell mitosis to accelerate wound healing and treat diabetic ulcer wounds. The results revealed that PDA@Ag/SerMA microneedles exhibited approximately 100% antimicrobial efficacy against Staphylococcus aureus and Escherichia coli under 808 nm near-infrared (NIR) irradiation. Furthermore, the wound healing rate of mice reached 95% within 12 days, which demonstrated the excellent antibacterial properties and wound healing efficacy of PDA@Ag/SerMA microneedles at cellular and animal levels, providing a potential solution for treating DFU.

Evaluation of the antimicrobial properties of natural extracts of Ganoderma lucidum

There is a growing importance of alternative anticancer and anti-inflammatory treatments. Current interest lies in natural medicine and secondary metabolites present in plants, particularly focusing on triterpenes. Ganoderma lucidum is a fungal species of significant commercial interest due to its therapeutic and medicinal properties resulting from secondary metabolites such as polysaccharides and triterpenes. These compounds exhibit antitumor activity and bolster the immune system. The study aimed to assess the antimicrobial activity of G. lucidumextracts, both commercial and wild. The content of ganoderic acids in all extracts showed a slight difference in concentration between commercial and wild extracts. However, no bacterial inhibition halos were observed in any of the strains used. The presence of varying concentrations of ganoderic acids among treatments underscores the importance of optimizing and standardizing a comprehensive strategy for extracting secondary metabolites, focusing on producing high-quality supplements and pharmaceutical products. Furthermore, preserving the stability of the obtained triterpenes is necessary due to their importance in the medicinal properties of the fungus.

A novel antimicrobial peptide MP-4: Insights into its antimicrobial properties and intestinal regulation on E. coli-infected mice

The quest for novel, potent antimicrobial agents with low resistance potential poses a significant challenge for the advancement of the food and medical sectors. This study aimed to elucidate the antibacterial potency of antimicrobial peptides derived from koumiss in a murine model. Leveraging an antimicrobial peptide database, six peptides (MP-1 to MP-6) were meticulously predicted and screened for their antibacterial properties. These peptides were subsequently synthesized using chemical solid-phase methods and their antibacterial activities were rigorously validated. Remarkably, among the six peptides, MP-4 demonstrated a profound antibacterial effect against E. coli, achieving rapid bacterial eradication within 240 min. Flow cytometry analysis further corroborated its significant bactericidal activity. In vivo experiments conducted on mice infected with E. coli revealed that oral administration of MP-4 significantly ameliorated symptoms such as lethargy, anorexia, and weight loss. Additionally, it effectively reduced the colonic E. coli burden, attenuated inflammatory responses, and favorably modulated the intestinal microbiota composition. This study not only validates the robust antibacterial activity of the koumiss-derived antimicrobial peptide MP-4, but also underscores its potential therapeutic application in mitigating E. coli infections and promoting intestinal health.

In Situ Antimicrobial Properties of Sabinene Hydrate, a Secondary Plant Metabolite.

The objective of this research was to investigate natural products for their potential against pathogenic microorganisms. Sabinene hydrate (SH), a monoterpenoid, is synthesised by numerous different plants as a secondary metabolite. At present, there is a lack of definite investigations regarding the antimicrobial activity of SH itself and its different isomers. The antimicrobial effects of commercially available SH (composed mainly of trans-isomer) were evaluated within a range of concentrations in three types of contact tests: solid and vapor diffusion and the macro-broth dilution method. Moreover, the effects of SH on the rate of linear growth and spore germination were also examined. Ethanolic SH solutions were tested against an array of microorganisms, including blue-stain fungi (Ceratocystis polonica, Ophiostoma bicolor, O. penicillatum), frequently originating from bark beetle galleries; three fungal strains (Musicillium theobromae, Plectosphaerella cucumerina, and Trichoderma sp.) isolated from a sapwood underneath bark beetle galleries (Ips typographus) on spruce (Picea abies) stems; Verticillium fungicola, isolated from diseased I. typographus larvae; two Gram-positive bacteria (Bacillus subtilis and Staphylococcus aureus), two Gram-negative bacteria (Escherichia coli and Pseudomonas aeruginosa); five yeasts (Candida albicans, C. krusei, C. parapsilosis, Saccharomyces cerevisiae, and Rhodotorula muscilaginosa), and two saprophytic fungi (Aspergillus niger and Penicillium notatum). In solid agar disc diffusion tests, Gram-positive bacteria exhibited greater susceptibility to SH than Gram-negative bacteria, followed by yeasts and fungi. The most resistant to SH in both the disc diffusion and broth macro-dilution methods were P. aeruginosa, A. niger, and Trichoderma sp. strains. Blue-stain fungi and fungi isolated from the Picea sapwood were the most resistant among the fungal strains tested. The minimum inhibition concentrations (MICs) generated by SH and determined using a disc volatilization method were dependent on the fungal species and played an important role in the development of microorganism inhibition. The two Gram-positive bacteria, B. subtilis and S. aureus (whose MICs were 0.0312 and 0.0625 mg/mL, respectively), were the organisms most susceptible to SH, followed by the Gram-negative bacterium, E. coli (MIC = 0.125 mg/mL) and two yeasts, C. albicans and C. kruei (MIC was 0.125 mg/mL and 0.25 mg/mL, respectively). C. parapsilosis (MIC = 0.75 mg/mL) was the yeast most resistant to SH. The investigation of antimicrobial properties of plant secondary metabolites is important for the development of a new generation of fungicides.

Enhanced antimicrobial activity of Cu-decorated graphene nanoplatelets and carbon nanotubes

New materials with antimicrobial properties are necessary to combat the proliferation and transmission of pathogenic microorganisms. In this work, graphene nanoplatelets (GPN) and multi-walled carbon nanotubes (CNT) decorated with Cu nanoparticles (Cu NPs) were synthetized by microwave-assisted hydrothermal method, varying the Cu content from 1 to 10 wt.%. These materials were characterized by X-ray diffraction (XRD), Raman spectroscopy, and scanning and transmission electron microscopy (SEM and TEM) and their antimicrobial activity against Gram-positive Staphylococcus aureus (S. aureus) and Gram-negative Escherichia coli (E. coli) were evaluated. The sample with 10 wt.% Cu at CNTs is more effective compared to GPNs. Then, brass coatings with pure and Cu-decorated (10 wt.%) CNTs and GPNs were prepared by spin coating to evaluate the antimicrobial activity of these surfaces. It was observed that coatings with the carbon matrices reduced microbial growth by 2 logs, whereas decoration with Cu NPs amplified this value, especially for the Cu/CNT coating, achieving up to a 6-log reduction after 24 h of contact. The stability of the antimicrobial activity of these coatings was evaluated over 5 successive 24-h cycles, demonstrating high stability. DFT calculations on a simplified model, based on a Cu atom adsorbed on GPN and CNT, reveal a thermodynamically favorable pathway to explain the antibacterial activity. The results show a mechanism that could promote the formation of the precursors of hydroxyl (⦁OH), superoxide (⦁O2−), and hydroperoxyl (⦁OOH) radicals, which are adsorbed strongly on GPN and CNT surfaces. This study highlighted the critical role of Cu NPs-loaded on carbon materials, GPN and CNT, in enhancing the antibacterial activity.

Study of the Reinforcing Effect and Antibacterial Activity of Edible Films Based on a Mixture of Chitosan/Cassava Starch Filled with Bentonite Particles with Intercalated Ginger Essential Oil.

Edible films based on biopolymers are used to protect food from adverse environmental factors. However, their ample use may be hindered by some challenges to their mechanical and antimicrobial properties. Despite this, in most cases, increasing their mechanical properties and antibacterial activity remains a relevant challenge. To solve this problem, a possible option is to fill the biopolymer matrix of films with a functional filler that combines high reinforcing and antibacterial properties. In this work, biocomposite films based on a mixture of chitosan and cassava starch were filled with a hybrid filler in the form of bentonite clay particles loaded with ginger essential oil (GEO) in their structure with varied concentrations. For this purpose, GEO components were intercalated into bentonite clay interlayer space using a mechanical capture approach without using surface-active and toxic agents. The structure and loading efficiency of the essential oil in the obtained hybrid filler were analyzed by lyophilization and laser analysis of dispersions, ATR-FTIR spectroscopy, thermogravimetry, and X-ray diffraction analysis. The filled biocomposite films were analyzed using ATR-FTIR spectroscopy, optical and scanning electron spectroscopy, energy dispersive spectroscopy, mechanical analysis under tension, and the disk diffusion method for antibacterial activity. The results demonstrated that the tensile strength, Young's modulus, elongation at the break, and the antibacterial effect of the films increased by 40%, 19%, 44%, and 23%, respectively, compared to unfilled film when the filler concentration was 0.5-1 wt.%.

A Brief Review on the Emerging Role of Bacterial Pigments: From Industrial Uses to Novel Therapeutic Applications

Pigments produced by microorganisms are in high demand due to their safe, non-toxic, and biodegradable characteristics in both industrial and pharmaceutical fields. Using bacteria for pigment production offers several advantages, such as a short life cycle and ease of genetic modification. Numerous studies have highlighted that soil bacteria significantly contribute to the production of coloured pigments as secondary metabolites. Bacterial pigments are well-known for their antimicrobial, antioxidant, and anticancer properties, offering new therapeutic opportunities for the development of novel drugs. However, compared to fungal pigments, most bacterial pigments are still in the research and development stage. Hence, efforts to intensify bacterial pigment production are essential to make them readily available on the market at a low cost for various applications. This review article sheds light on bacterial pigments and their various applications based on the data available in the literature.

Salivary Oxidative-Antioxidant Profile Following Adjunctive Gaseous Ozone Administration in Non-Surgical Periodontal Treatment: A Randomized Controlled Trial.

Background: Periodontitis is associated with increased oxidative stress, which may impair treatment outcomes. Ozone therapy has shown promise in reducing oxidative stress and improving periodontal health. This study examined the impact of adjunctive gaseous ozone administration on salivary oxidative stress markers in patients with periodontitis stages II-IV and grades A-C undergoing non-surgical periodontal treatment (NSPT). Methods: Ninety patients with periodontitis were randomly allocated to either the test group (NSPT with gaseous ozone administration) or the control group (NSPT alone) using computer-generated randomization. The OzoneDTA system was used to deliver ozone at 2100 ppm for 60 s per site once weekly for 4 weeks. Clinical periodontal parameters (probing depth [PD], clinical attachment level [CAL], plaque index [PI], gingival index [GI]) and salivary oxidative stress markers (malondialdehyde [MDA], total antioxidant capacity [TAC], superoxide dismutase [SOD]) were assessed by blinded examiners at baseline, 3, and 6 months post-treatment. Results: Mixed ANOVA revealed significant three-way interactions between time, treatment, and stage or grade for clinical and biochemical measures (p < 0.001). The test group exhibited significant improvements in TAC (mean difference: 0.45 ± 0.12 mmol/L, p = 0.002), MDA (-0.38 ± 0.09 nmol/mL, p = 0.001), and SOD (65 ± 18 U/mL, p < 0.001) compared with the control group, with more pronounced effects in stages III and IV. Large effect sizes (Cohen's d > 0.8) were observed for the test group between baseline and 6 months for all markers. Conclusions: Gaseous ozone administration as an adjunct to NSPT can effectively improve clinical periodontal parameters and salivary oxidative stress markers, particularly in stages III and IV periodontitis. The enhanced outcomes may be attributed to ozone's antimicrobial and immunomodulatory properties, which synergistically reduce oxidative stress and promote periodontal healing.

Toward the Production of Hydroxyapatite/Poly(Ether-Ether-Ketone) (PEEK) Biocomposites: Exploring the Physicochemical, Mechanical, Cytotoxic and Antimicrobial Properties.

The development of hydroxyapatite (HAp) and polyether ether ketone (PEEK) biocomposites has been extensively studied for bone repair applications due to the synergistic properties of the involved materials. In this study, we aimed to develop HAp/PEEK biocomposites using high-energy ball milling, with HAp concentrations (20%, 40%, and 60% w/v) in PEEK, to evaluate their physicochemical, mechanical, cytotoxicity, and antimicrobial properties for potential applications in Tissue Engineering (TE). The biocomposites were characterized by structure, morphology, apparent porosity, diametral compression strength, cytotoxicity, and antimicrobial activity. The study results demonstrated that the HAp/PEEK biocomposites were successfully synthesized. The C2 biocomposite, containing 40% HAp, stood out due to the optimal distribution of HAp particles in the PEEK matrix, resulting in higher compression strength (246 MPa) and a homogeneous microstructure. It exhibited antimicrobial activity against Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, with no cytotoxicity observed. These properties make the C2 biocomposite promising for regenerative medicine applications, combining mechanical strength, bioactivity, and biocompatibility.