Antimicrobial Action Research Articles

BOPHY Derivatives as Phototherapeutic Agents for the Photodynamic Inactivation of Microorganisms

AbstractThe improvement of photodynamic inactivation (PDI) significantly depends on the development of new families of photosensitizers (PSs). In this sense, three BOPHY derivatives (BP, BP‐Br and BP‐I) were synthetized, studied, and compared to assess their antimicrobial photodynamic properties. BP is an interesting fluorescent probe for cell imaging, while the halogenated analogs (BP‐Br and BP‐I) are excellent oxygen photosensitizing agents. BP compound presented a fluorescence quantum yield close unity and showed no reactive oxygen species (ROS) production. In contrast, BP‐I did not show emission properties but exhibited a high production of ROS through both photodynamic mechanisms, generating singlet oxygen (type II) and superoxide radical anion (type I) under aerobic light irradiation. BP‐Br presented an adequate balance between ROS production and emission properties. The photokilling action and the binding to bacterial cells of these macrocycles were evaluated in vitro against methicillin‐resistant Staphylococcus aureus (MRSA) and Escherichia coli bacteria. Our results demonstrated that the halogenated BOPHY derivatives were effective PSs in inactivating MRSA using shorter irradiation periods. In addition, the antimicrobial action sensitized by these BOPHYs was potentiated by adding KI. The combination of halogenated BOPHY and KI led to a complete elimination of both Gram‐positive and Gram‐negative bacteria. Hence, BP‐Br and BP‐I prove to be potent broad‐spectrum antimicrobial PSs. To the best of our knowledge, this is the first time that BOPHY derivatives have been applied to photokill pathogenic microorganisms.

Optimizing the Synthesis of Titanium Carbide-Bismuth Oxide for Enhanced Antimicrobial Properties.

Background The two-dimensional MXene, known as titanium carbide (Ti₃C₂), is characterized by its substantial interlayer spacing, extensive surface area, hydrophilic nature, exceptional thermal stability, and outstanding electrical conductivity. These distinctive attributes render Ti₃C₂ an ideal candidate for detecting target analytes and immobilizing biomolecules. Bismuth oxide (Bi₂O₃), an essential compound of bismuth, frequently acts as a foundational element in bismuth chemistry. Its applications are diverse, from fireworks to oxygen gas sensors and solid oxide fuel cells, with particular emphasis on its behaviour under elevated temperatures and pressures. Notably, phase transitions to various polymorphs, which remain metastable at room temperature, have been documented under these conditions, indicating potential for numerous applications. Integrating MXene with Bi₂O₃ composites holds significant promise for advancements in energy-related electronics, sensing technologies, and photocatalytic processes. Objective To optimize the synthesis of titanium carbide-bismuth oxide (Ti₃C₂-Bi₂O₃) nanoparticles to enhance their antimicrobial activity by identifying the best synthesis conditions and assessing their effectiveness against various microbial pathogens. Materials and methods The preparation of Ti₃C₂ MXene involves dissolving lithium fluoride in hydrochloric acid, followed by Ti₃AlC₂ and stirring at 40°C for 48 hours. The resulting pellet is then dispersed in ultrapure water and centrifuged to obtain the MXene dispersion. Bi₂O₃ nanoparticles are prepared by preparing bismuth nitrate pentahydrate in nitric acid and adding sodium hydroxide to adjust the pH. The resulting white precipitate is filtered, washed, and dried before being calcined at 400°C for two hours to produce Bi₂O₃ nanoparticles. The Ti₃C₂-Bi₂O₃ composite is synthesized by adding Bi(NO₃)₃ solution to a 5 mg/mL Ti₃C₂Tx MXene solution. The reaction solution is heated to 160°C, and the resulting black powder is labelled as x% Bi₂O₃/MXene. The antimicrobial efficacy of the nanoparticles is assessed using the disk diffusion method. The zones of inhibition are measured and analyzed as indicators of antimicrobial activity. Results The scanning electron microscopy (SEM) analysis revealed the presence of Bi₂O₃ particles alongside Ti₃C₂​​​​​​​ nanosheets, while the X-ray diffraction (XRD) analysis and energy-dispersive X-ray spectroscopy (EDS) confirmed the high crystallinity of the compound. Furthermore, the compound was determined to be impurity-free and demonstrated antimicrobial properties. Conclusion The XRDanalysis confirms the effective integration of various materials and the existence of crystalline phases. SEMprovides insights into the morphology and organization of particles within sheets, whereas EDSassesses the elemental composition and its uniform distribution. These studies demonstrate the synthesis of Ti₃C₂-Bi₂O₃​​​​​​​ composites, suggesting their potential for usage in applications involving antimicrobial action.

Abietane diterpenoid salvipisone: Structure elucidation, conformational analysis, and antimicrobial activity

Salvipisone, an abietane diterpenoid, was isolated from the roots of Salvia aethiopis L. using a combination of chromatographic separation techniques. Its structure was elucidated employing a variety of spectroscopic methods, including ultraviolet (UV), infrared (IR), 1D and 2D nuclear magnetic resonance (NMR), and mass spectrometry. A comprehensive analysis of experimental 1D and 2D NMR data, incorporating 1H iterative full spin analysis and higher-order multiplet simulation, revealed discrepancies with previously reported NMR data for this compound. Detailed examination of the 1H NMR spectrum's spin-spin coupling structure provided insights into the relative populations of the three staggered conformers around the C12–C13 bond at room temperature. The conformer populations were determined using the relationship between the experimental values for vicinal coupling constants and the estimated ones for the preferred staggered conformers, yielding a ratio of approx. 80:4:16 for anti, gauche, and gauche′-conformers, respectively. Possible reasons for the observed unevenly populated staggered conformers were also discussed. The antimicrobial activity of salvipisone was evaluated using in vitro and in silico methods. In vitro antimicrobial assays demonstrated that salvipisone exhibited the highest inhibitory effect against Staphylococcus aureus ATCC and Enterococcus faecalis ATCC (MIC = 3.125 μg/mL), followed by Bacillus subtilis ATCC (MIC = 6.25 μg/mL). In contrast, concentrations above 100 μg/mL were necessary to inhibit Escherichia coli ATCC and Klebsiella pneumoniae ATCC. In silico studies suggested that salvipisone, particularly its keto form, has significant potential for inhibiting the enzyme gyrase, highlighting its mechanism of antimicrobial action. Our findings highlight the promising antimicrobial and inhibitory properties of salvipisone, particularly against Gram-positive bacteria such as S. aureus.

Toxic Effects of Biogenic and Synthesized Silver Nanoparticles on Sea Urchin Echinometra lucunter Embryos.

Due to their broad-spectrum antimicrobial action and ease of synthesis, silver nanoparticles (AgNP) are one of the most widely used nanomaterials in different industrial and ecological areas. AgNP are released into marine ecosystems, nevertheless, their ecotoxicological effects have been overlooked. In this study, we evaluated the toxic effects of biogenic and synthesized AgNP (AgNPIBCLP11 and AgNPSINT) on sea urchin Echinometra lucunter embryos and compared them with the metal precursor silver nitrate (AgNO3). Fertilized eggs were exposed to five concentrations of the test compounds and a negative control for 48h under controlled conditions. The IC50-48h of AgNPIBCLP11, AgNPSINT and AgNO3 were 0.31, 4.095, and 0.01µg L-1, evidencing that both AgNP are less toxic than AgNO3, and that AgNPSINT is less toxic than the AgNPIBCLP11. Toxicity to E. lucunter embryos could be explained by the fact that Ag affects DNA replication and induces the formation of pores in the cellular wall, leading to apoptosis.

Fabrication, Preparation, Physicochemical Characterization, and Theoretical Studies of Some Novel Schiff Base Ciprofloxacin Metal Complexes: DNA Interaction and Biomedical Applications

ABSTRACTNovel compounds with pharmacological activity were synthesized from Pd(II), Fe(III), Cr(III), Ni(II), and Cu(II) ions with 1‐cyclopropyl‐6‐fluoro‐4‐(2‐hydroxy‐phenylimino)‐7‐piperazin‐1‐yl‐1,4‐dihydro‐quinoline‐3‐carboxylic acid (CFAP). The ligand's NH and OH groups allowed it to interact with the metals as a neutral tridentate. The investigated novel compounds were described using 1H and 13C NMR spectra, FT‐IR spectrums, TGA and UV–Vis (conductance of molecules), and CHN‐analysis. Additionally, the pH profile of the CFAP complexes indicated great stability, and the complexes' stability constant was discovered in the solution. To extract important properties for CFAP and its complexes, computational research was used, CFAPCu, CFAPCr, CFAPNi, and CFAPFe have octahedral geometry, while CFAPPd has square planar geometry. To investigate the molecular geometry, density functional theory calculations (DFT) were carried out. The molar ratio and continuous fluctuation data confirmed that the (M:L) ratio was (1:1). In vitro tests were conducted to evaluate Schiff base's antimicrobial action ligand and its metal chelates against fungal and bacterial infections. The findings showed that the antimicrobial efficacy is as follows: When CFAPPd is compared to fluconazol and ofloxacin as reference medications, it is the highly inhibitor complex. The novel CFAP ligand and its complexes were investigated for In vitro carcinogenic potential against Hep‐G2, MCF‐7, and HCT‐116 cell lines. As compared to the medication vinblastine, the results once again demonstrated that CFAPPd is the most active agent. Moreover, the complexes demnstrated strong reactivity in capturing free radicals when their antioxidant activity was investigated. Viscosity, spectral investigations, and gel electrophoreses were used to identify the interaction between metal chelates and DNA. Every examined compound is shown to be an enthusiastic DNA binder by viscosity and spectrophotometric titration investigations. The heightened hydrophobic and electrostatic interactions between aromatic rings could be the cause of this. Ultimately, these compounds could be regarded as promising bioactive substances.

Perinatal Exposure to Phenols and Poly- and Perfluoroalkyl Substances and Gut Microbiota in One-Year-Old Children.

The role of the gut microbiota in human health calls for a better understanding of its determinants. In particular, the possible effects of chemicals with widespread exposure other than pharmaceuticals are little known. Our aim was to characterize the sensitivity of the early-life gut microbiota to specific chemicals with possible antimicrobial action. Within the SEPAGES French couple-child cohort, we assessed 12 phenols in repeated urine samples from 356 pregnant women and their offspring and 19 poly- and perfluoroalkyl substances (PFASs) in serum from the pregnant women. We collected stool samples from the children at one year of age, in which the V3-V4 region of the 16S rRNA gene was sequenced, allowing for gut bacterial profiling. Associations of each chemical with α- and β-diversity indices of the gut microbiota and with the relative abundance of the most abundant taxa were assessed using single-pollutant and mixture (BKMR) models. Perinatal exposure to certain parabens was associated with gut microbiota α- and β-diversity and with Firmicutes and Proteobacteria. Suggestive associations of certain phenols with genera of the Lachnospiraceae and Enterobacteriaceae families were observed, but these were not maintained after correction for multiple testing. Parabens, which have known antimicrobial properties, might disrupt the child gut microbiota, but larger studies are required to confirm these findings.

Impact on the incorporation of metals in physicochemical and antimicrobial properties in films based on arrowroot starcha

New biodegradable packaging has been developed from renewable sources, mainly of vegetable origin. Arrowroot starch has been recently used to produce high-quality biodegradable films capable of behaving well when incorporating oils, extracts, metal, and metal nanocomposites. The study aimed to verify the impact of incorporating metals in the sulfate and chloride forms in a biopolymeric matrix from arrowroot starch in terms of biodegradability, physicochemical and microbiological parameters. Different arrowroot films were produced to incorporate solutions with a concentration of 1 Mol L-1 of sulfate and chloride metals. The action of biodegradability in soil, UV transmittance, and visible light were observed in UV-Vis spectrophotometry and antimicrobial action on Escherichia coli, Staphylococcus aureus, Salmonella serovar Typhimurium, and Salmonella serovar Enteritidis. Good results were obtained, such as biodegradability time between 81.70 to 100 % (30 days), a low transmission rate of UV radiation and visible light between 250 to 890 nm, high capacity for bacterial inhibition between 22.08 to 10.05 mm for E. coli, among 25.59 to 11.10 mm for S. aureus, between 22.14 to 11.66 mm for S. serovar Typhimurium and between 21.11 to 8.26 mm for S. serovar Enteritidis. It is concluded that the biodegradable films of arrowroot starch incorporated with metals showed potential in all the evaluated tests, thus characterizing possible new products for different uses, such as low time available in the environment, preservation of the characteristics of special products, and antimicrobial capacity.

Interplay between Bile Acids and Intestinal Microbiota: Regulatory Mechanisms and Therapeutic Potential for Infections.

Bile acids (BAs) play a crucial role in the human body's defense against infections caused by bacteria, fungi, and viruses. BAs counteract infections not only through interactions with intestinal bacteria exhibiting bile salt hydrolase (BSH) activity but they also directly combat infections. Building upon our research group's previous discoveries highlighting the role of BAs in combating infections, we have initiated an in-depth investigation into the interactions between BAs and intestinal microbiota. Leveraging the existing literature, we offer a comprehensive analysis of the relationships between BAs and 16 key microbiota. This investigation encompasses bacteria (e.g., Clostridioides difficile (C. difficile), Staphylococcus aureus (S. aureus), Escherichia coli, Enterococcus, Pseudomonas aeruginosa, Mycobacterium tuberculosis (M. tuberculosis), Bacteroides, Clostridium scindens (C. scindens), Streptococcus thermophilus, Clostridium butyricum (C. butyricum), and lactic acid bacteria), fungi (e.g., Candida albicans (C. albicans) and Saccharomyces boulardii), and viruses (e.g., coronavirus SARS-CoV-2, influenza virus, and norovirus). Our research found that Bacteroides, C. scindens, Streptococcus thermophilus, Saccharomyces boulardii, C. butyricum, and lactic acid bacteria can regulate the metabolism and function of BSHs and 7α-dehydroxylase. BSHs and 7α-dehydroxylase play crucial roles in the conversion of primary bile acid (PBA) to secondary bile acid (SBA). It is important to note that PBAs generally promote infections, while SBAs often exhibit distinct anti-infection roles. In the antimicrobial action of BAs, SBAs demonstrate antagonistic properties against a wide range of microbiota, with the exception of norovirus. Given the intricate interplay between BAs and intestinal microbiota, and their regulatory effects on infections, we assert that BAs hold significant potential as a novel approach for preventing and treating microbial infections.

Green Synthesis of Silver Nanoparticle from Anadenanthera colubrina Extract and Its Antimicrobial Action against ESKAPEE Group Bacteria.

Given the urgent need for novel methods to control the spread of multidrug-resistant microorganisms, this study presents a green synthesis approach to produce silver nanoparticles (AgNPs) using the bark extract from Anadenanthera colubrina (Vell.) Brenan var. colubrina. The methodology included obtaining the extract and characterizing the AgNPs, which revealed antimicrobial activity against MDR bacteria. A. colubrina species is valued in indigenous and traditional medicine for its medicinal properties. Herein, it was employed to synthesize AgNPs with effective antibacterial activity (MIC = 19.53-78.12 μM) against clinical isolates from the ESKAPEE group, known for causing high hospitalization costs and mortality rates. Despite its complexity, AgNP synthesis is an affordable method with minimal environmental impacts and risks. Plant-synthesized AgNPs possess unique characteristics that affect their biological activity and cytotoxicity. In this work, A. colubrina bark extract resulted in the synthesis of nanoparticles measuring 75.62 nm in diameter, with a polydispersity index of 0.17 and an average zeta potential of -29 mV, as well as low toxicity for human erythrocytes, with a CC50 value in the range of 961 μM. This synthesis underscores its innovative potential owing to its low toxicity, suggesting applicability across several areas and paving the way for future research.

Antimicrobial and cytotoxic activities of flavonoid and phenolics extracted from Sepia pharaonis ink (Mollusca: Cephalopoda)

BackgroundSeveral studies have been reported previously on the bioactivities of different extracts of marine molluscs. Therefore, we decided to evaluate the cytotoxic and antimicrobial activities of S. pharaonis ink as a highly populated species in the Red Sea. We extracted the flavonoids from the ink and analyzed their composition. Then we evaluated systematically the cytotoxic and antimicrobial properties of this extract. A pharmacokinetic study was also conducted using SwissADME to assess the potential of the identified flavonoids and phenolic compounds from the ink extract to be orally active drug candidates.ResultsCytotoxic activity was evaluated against 5 cell lines (MCF7, Hep G2, A549, and Caco2) at different concentrations (0.4 µg/mL, 1.6 µg/mL, 6.3 µg/mL, 25 µg/mL, 100 µg/mL). The viability of examined cells was reduced by the extract in a concentration-dependent manner. The highest cytotoxic effect of the extract was recorded against A549 and Hep G2 cancer cell lines cells with IC50 = 2.873 and 7.1 µg/mL respectively. The mechanistic analysis by flow cytometry of this extract on cell cycle progression and apoptosis induction indicated that the extract arrests the cell cycle at the S phase in Hep G2 and MCF7, while in A549 cell arrest was recorded at G1 phase. However, it causes G1 and S phase arrest in Caco2 cancer cell line. Our data showed that the extract has significant antimicrobial activity against all tested human microbial pathogens. However, the best inhibitory effect was observed against Candida albicans ATCC 10,221 with a minimum inhibitory concentration (MIC) of 1.95 µg/mL. Pharmacokinetic analysis using SwissADME showed that most flavonoids and phenolics compounds have high drug similarity as they satisfy Lipinski’s criteria and have WLOGP values below 5.88 and TPSA below 131.6 Å2.ConclusionS. pharaonis ink ethanolic extract showed a promising cytotoxic potency against various cell lines and a remarkable antimicrobial action against different pathogenic microbial strains. S. pharaonis ink is a novel source of important flavonoids that could be used in the future in different applications as a naturally safe and feasible alternative of synthetic drugs.

A one-stop integrated natural antimicrobial microneedles with anti-inflammatory, pro-angiogenic and long-term moisturizing properties to accelerate diabetic wound healing

Diabetic ulcers present a formidable obstacle in diabetes management, typically leading to high mortality and amputation rates. To overcome traditional monotherapy drawbacks, We developed a novel microneedle strategy for combined antimicrobial action: ingeniously integrating quercetin with Platelet-derived Growth Factor-BB(PDGF-BB) and Sucrose Octasulfate(SOS) into the microneedle system(QPS MN). This method allows to penetrate through biofilms, administering quercetin nanocrystals and PDGF-BB deep into the tissue to combat microbial infection, mitigate inflammation, and promote angiogenesis. The accompanying backing material contains SOS, which absorbs wound exudate and forms a dressing that provides a moist environment for wound healing In an in vitro wound-scratch assay demonstrated that co-cultivating Human Umbilical Vein Endothelial Cells(HUVEC) with QPS MN for 48 h (90.3 ± 2.51 %) significantly enhanced cell migration compared to the control group (20.2 ± 1.41 %). Moreover, treatment of streptozotocin-induced diabetic wounds in rats with QPS MN for 14 days resulted in a wound healing rate of 96.56 ± 3.44 %, far surpassing the healing rate of only 40.34 ± 7.26 % observed in the untreated control group. Furthermore, the QPS MN treated wounds exhibited a notable increase in skin appendages and neovascularisation, indicating promising potential for achieving complete wound healing. These results suggest that QPS MN may offer substantial therapeutic benefits for addressing diabetic wounds.

Sustainable Solution to Antibiotic Resistance: Pavetta indica-Based Nanomedicine

The escalating global health crisis, characterized by the emergence of antimicrobial-resistant pathogens, necessitates innovative strategies. This study explores the potential of Pavetta indica, a previously underutilized plant, as a multifaceted resource for addressing this critical challenge. A comprehensive phytochemical investigation unveiled a rich repertoire of bioactive compounds within P. indica, including essential metabolites Moisture (9.14%), Crude Protein (10.93%), and Crude Fiber (15.46%). Additionally, significant levels of Calcium, Phosphorus, and Ether Extract were identified, suggesting its potential contribution to a balanced diet and a diverse array of secondary metabolites identified through GC-MS analysis identified diverse bioactive compounds including Dodecanoic acid, Lupeol, and β-D-Glucopyranose among others, highlighting its potential health benefits and paving the way for further research on specific bioactivities. P. indica extract exhibited concentration-dependent ABTS and DPPH scavenging activities, comparable to ascorbic acid. This underscores its potential as a natural antioxidant source to combat oxidative stress-related diseases. Leveraging the bio-reducing capabilities of P. indica extract, we embarked on the green synthesis of silver nanoparticles. P. indica extract successfully synthesized silver nanoparticles, confirmed by UV-Vis spectroscopy (SPR band at 420 nm) and TEM (spherical particles, 25-50 nm). These nanoparticles showed potent antimicrobial activity against Bacillus subtilis, E. coli, and Pseudomonas aeruginosa, comparable to Gentamicin. The synthesized silver nanoparticles demonstrated concentration-dependent antifungal activity against Candida albicans, Aspergillus fumigatus, and Sporothrix schenckii, suggesting their potential as effective antifungal agents. Our findings underscore the significance of exploring underutilized plant resources for developing innovative solutions to pressing global health challenges. By integrating phytochemistry, nanotechnology, and microbiology, this research offers a promising approach to combating antimicrobial resistance. The study's outcomes lay the groundwork for future investigations into the underlying mechanisms of antimicrobial action, optimization of nanoparticle properties, and preclinical evaluation of their therapeutic efficacy.

Comparative evaluation of the effect of 2% graphene oxide and 5% hydroxyapatite nanoparticles in isolation and in combination on micro tensile bond strength of 5th generation adhesive

Background Graphene is the thinnest, strongest, and stiffest imaginable material. The biocompatible property of graphene oxide can initiate and facilitate cell adhesion, proliferation, and differentiation of periodontal ligament, osteogenic, and oral epithelial cells. Furthermore, the antibiofilm and anti-adhesion properties of graphene oxide in the prevention of dental biofilm infections, dental caries, and dental erosion as well as for implant surface modification and as an anti-quorum sensing agent. Composites are the most often utilized materials for restoration in the field of dentistry due to adhesive resins' improved mechanical and cosmetic properties. To safeguard the dentin and prevent dental cavities, dentin adhesives are utilized to affix hydrophobic resin composites to hydrophilic dentin tissue. Materials and Method Dental adhesives have a harder time adhering to dentin because it contains more water and is less mineralized than enamel. This makes the method more sensitive. Result As a result, it was chosen to assess and contrast the impact of 5% Hydroxyapatite nanoparticles and 2% Graphene oxide nanoparticles, both separately and together, on the Micro tensile bond strength of 5th generation adhesive. Conclusion Graphene oxide is the most versatile form of Graphite in structural and functional configuration. Graphene oxide possesses extraordinary physical, chemical, optical, electrical and mechanical properties. Among the graphene family nanomaterials, the reduced form of Graphite adding the oxygenated functional group to the structure increases the surface area and therefore exhibits enviable excellent interaction ability with metal and ions as well as organic species. Graphene oxide in dentistry has provided outstanding results in antimicrobial action, regenerative dentistry, bone tissue engineering, drug delivery, physicochemical properties, enhancement of dental biomaterials and oral cancer treatment.

Microbial Contamination of Food: Probiotics and Postbiotics as Potential Biopreservatives.

Microbial contamination of food and alimentary toxoinfection/intoxication in humans are commonly caused by bacteria such as Salmonella spp., Escherichia coli, Yersinia spp., Campylobacter spp., Listeria monocytogenes, and fungi (Aspergillus, Fusarium). The addition of probiotic cultures (bacterial strains Lactobacillus and Bifidobacterium and the yeast Saccharomyces cerevisiae var. boulardii) to food contributes primarily to food enrichment and obtaining a functional product, but also to food preservation. Reducing the number of viable pathogenic microorganisms and eliminating or neutralizing their toxins in food is achieved by probiotic-produced antimicrobial substances such as organic acids (lactic acid, acetic acid, propionic acid, phenylacetic acid, and phenyllactic acid), fatty acids (linoleic acid, butyric acid, caproic acid, and caprylic acid), aromatic compounds (diacetyl, acetaldehyde, reuterin), hydrogen peroxide, cyclic dipeptides, bacteriocins, and salivabactin. This review summarizes the basic facts on microbial contamination and preservation of food and the potential of different probiotic strains and their metabolites (postbiotics), including the mechanisms of their antimicrobial action against various foodborne pathogens. Literature data on this topic over the last three decades was searched in the PubMed, Scopus, and Google Scholar databases, systematically presented, and critically discussed, with particular attention to the advantages and disadvantages of using probiotics and postbiotics as food biopreservatives.

Formulation and Evaluation of Herbal Hand Sanitizer

Hands are the to begin with mode of transmission of organisms and diseases. Hand cleanliness is a key guideline and work out in the anticipation, control and lessening of contaminations. Due to COVID widespread the require of hand sanitizer has expanded which causes less dryness to hand. Considering the require, we arranged a polyherbal sanitizer utilizing seven plant extricates with other fixings counting isopropyl liquor, camphor, hydrogen peroxide, glycerol and water. The fixings were chosen on the premise of their antimicrobial property. The fixings and sanitizer were assessed for antimicrobial property and appeared strong action against gram positive microbes S. aureus, though blend of extricates appeared strong action against all the bacterial strains utilized but B. cereus. The sanitizer moreover appeared strong action against all the strains utilized in the climbing arrange of Klebsiella spp. > B. cereus > S. aureus > S. pyogenes > P. aeruginosa > Dermatophyte > E. coli and gave zone of hindrance of 18±0.05, 12±0.03, 11±0.01, 10±0.01, 9±0.5, 9±0.01 and 7±0.001 mm separately. The antimicrobial action was compared with other commercial hand sanitizer and greatest movement was appeared against Klebsiella spp. and least against E. coli and P. aeruginosa by all the sanitizer utilized. The adequacy of hand sanitizer was checked on hands of 38 volunteers of research facility specialists, patients and their relatives with composed and verbal assent. The sanitizer decreased or disposed of the development of pathogens confined from hands. Time interim impact was moreover checked at a time crevice of two hours too appeared the impact of hand sanitizer for longer time with diminishment in bacterial development. The sanitizer pH was soluble with great rack, surface and odor. No turbidity was seen when kept at higher temperature for 3 months and appeared no skin dryness with relieving impact after utilizing sanitizer on diverse volunteers.

A promising eco-friendly and cost-effective photocatalytic rolled graphene oxide/poly(m-methylaniline) core-shell nanocomposite for antimicrobial action.

A new and innovative rolled graphene oxide (roll-GO)/poly-m-methylaniline (PmMA) core-shell nanocomposite has been successfully synthesized using an in situ polymerization technique. This eco-friendly and cost-effective material shows great promise due to its antimicrobial properties. The characterization of the nanocomposite involved X-ray diffraction and Fourier transform infrared spectroscopy to analyze its structure and functional groups, whereas scanning electron microscopy and transmission electron microscopy (TEM) were utilized to examine its morphology. TEM analysis revealed the formation of roll-GO, forming multi-walled tubes with inner and outer diameters of 50 and 70nm, respectively. Optical analysis demonstrated an enhanced bandgap in the nanocomposite, with bandgap values of 2.38eV for PmMA, 2.67eV for roll-GO, and 1.65eV for roll-GO/PmMA. The antibacterial efficacy of the nanocomposite was tested against Gram-positive bacteria, including Bacillus subtilis and Staphylococcus aureus, as well as Gram-negative bacteria such as Escherichia coli and Salmonella sp. The well diffusion method was used to determine the inhibition zones, revealing that the nanocomposite demonstrated broad-spectrum antibacterial activity against all the pathogens tested. The largest inhibition zones were observed for B. subtilis, followed by S. aureus, E. coli, and Salmonella sp. Notably, the inhibition zones increased when the samples were exposed to light compared to dark conditions, with increases of 33 and 18mm noted for B. subtilis. This enhanced activity under light exposure is attributed to the photocatalytic properties of the nanocomposite. The antibacterial mechanism is based on both adsorption and degradation processes. Moreover, antibacterial activity was found to increase with increasing concentrations of nanoparticles, ranging from 100 to 500ppm. This suggests that the nanocomposite has potential as an alternative to antibiotics, especially considering the growing issue of bacterial resistance. The promising results obtained from the inhibition zones make these nanocomposites suitable for various applications. Currently, the research team is working on the development of a prototype utilizing these antimicrobial particles within commercial bottles for sterilization purposes in factories and companies.

Exploring probiotic potential and antimicrobial properties of lactic acid bacteria from cow's milk

One of the most important foods in the world is milk, due to its nutrients and composition. Milk also contains lactic acid bacteria (LABs), which can produce antimicrobial compounds and organic acids; an essential factor in developing different methods to control other bacteria. Another critical factor is that several species of LABs are considered potential probiotics, offering several health benefits. This study aimed to isolate, identify LABs, characterize the antimicrobial susceptibility profile, and evaluate the inhibition potential against Staphylococcus aureus (ATCC 25923), Listeria monocytogenes (ATCC 7644), Escherichia coli (ATCC 25922) and Salmonella Typhimurium (ATCC 14028); as well as verifying the acidification capacity, survival of simulated in vitro gastrointestinal conditions and identification of virulence genes and bacteriocin-producing genes. The study was carried out with LABs previously isolated from milk of cows with clinical mastitis, low and high (Somatic Cells Count) in herds from all regions of Brazil (South, Southeast, Central-West, North, and Northeast). One hundred and ten strains were selected for identification using the MALDI-TOF technique. The genera with the most significant spectrum of action were Lactococcus, Lactobacillus, and Pediococcus in the antimicrobial action test against pathogens, concluding that Lactobacillus showed resistance to several antibiotics. The analysis of antimicrobial action made it possible to verify the potential production of antimicrobial compounds by LABs against the primary pathogens of food origin. The most significant reduction in pH could be observed from 24 h to 48 h, ranging from 6.8 (0 h) to 4.74 (48 h) for Lactobacillus and Lactococcus. All isolates survived tolerance tests at pH=3.0 and bile salts (0.5 %), with survival rates ranging from 34.2 to 69.9 % at pH = 3.0 and above 82 % at 0.5 % bile salts. Lacotococcus and Lactobacillus isolates presented the plnEF and plnNC8 genes. This study contributes to the search for alternatives in the treatment of bacterial infections with a reduction in the use of antibiotics, which, due to the increase in bacterial resistance, is causing difficulties in treating diseases caused by these microorganisms. pH is an important parameter when it comes to food safety and conservation. Tolerance to acid stress and bile salts are important properties in evaluating probiotic potential and the ability to maintain high counts under these conditions. The presence of the plnEF and plnNC8 genes suggests bacteriocin production.

Optimizing the fucoidan extraction using Box-Behnken Design and its potential bioactivity

Fucoidan is a sulfated polysaccharide that occurs naturally in the cell wall of brown seaweeds and has substantial biological efficacy. Optimizing the extraction of fucoidan from different brown seaweeds was the primary goal of this research. The optimization of fucoidan extraction was applied on the brown macroalga Turbinaria turbinata using a Box-Behnken Design (BBD) to inspect the impacts of different pH (3, 5, 7), temperature (70, 80, 90 °C) and extraction duration (60, 120, 180 min) on both the yield and sulfate content of fucoidan. The optimized parameters recorded to maximize the fucoidan yield and its sulfate content were a pH of 3.44 and a temperature of 82.26 °C for 60 min. The optimal conditions obtained from BBD were used for fucoidan extraction from T. turbinata, Sargassum cinereum, Padina pavonica, and Dictyota dichotoma. The highest average of fucoidan yield was derived from P. pavonica (40.76 ± 4.04 % DW). FTIR, 1H NMR, and HPLC were used to characterize extracted fucoidan. The extracted fucoidan's Physical characteristics, biochemical composition, antioxidant potential, antitumor effect against breast cancer cells (MCF-7), and antimicrobial and anticoagulant activity were assessed. The extracted fucoidan from D. dichotoma, followed by that extracted from S. cinereum, which had the highest sulphate content, depicted the highest antioxidant, anticancer, and anticoagulant activities. Fucoidan has demonstrated a strong antimicrobial action against some pathogenic microorganisms; Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Klebsiella pneumonia, and Candida albicans. The anticoagulant properties of fucoidan from D. dichotoma were stronger than those of fucoidan from S. cinereum, T. turbinata, and P. pavonica due to its higher sulphate content. These findings could be used for various biomedical applications to improve the pharmaceutical industry.

Glucosinolate derivatives as antifungals: A review.

Fungal infections are becoming a severe threat to the security of global public health due to the extensive use of antibiotic medications and the rise in immune-deficient patients globally. Additionally, there is an increase in the development of fungus resistance to available antifungal medications. It is necessary to focus on the development of new antifungal medications in order to address these problems. The wide range of chemical structures, low cost, high availability, high antimicrobial action, and lack of adverse effects are the characteristics of plant secondary metabolites. In order to find and develop new antifungal medications, plant secondary metabolites like glucosinolate (GSL) derivatives are crucial sources of information. These natural compounds are enzymatically transformed into isothiocyanates (ITCs), nitriles, epithionitriles, oxazolidin-2-thion, and thiocyanate when they get mechanically damaged. The current review offers a thorough understanding of how isothiocyanates affect fungi with detailed mechanism. Along with this antifungal activity of nitriles, epithionitriles, oxazolidin-2-thion, and thiocyanate are mentioned. The review summarizes our present understanding of the following subjects: role of isothiocyanate by inhibiting aflatoxin biosynthesis, effect of isothiocyanate on transcriptomes, isothiocyanate targets cell membrane, role of isothiocyanate in efflux, and the role of isothiocyanate in synergistic activity. Antifungal activity of nitrile, epithionitrile, oxazolidine-2-thion, and thiocyanate is mentioned. Cytotoxicity study and clinical trials data were also added. More extensive studies will be needed in this field to assess safety concerns and clinical efficacies of GSL derivatives.

Phytochemical Composition and Antimicrobial and Antibiofilm Effect of Myrciaria cauliflora Hydroethanolic Extract against Staphylococcus aureus and Acinetobacter baumannii.

Staphylococcus aureus and Acinetobacter baumannii are opportunistic pathogens, and both are involved in different oral infections. This work aimed to analyze the phytochemical composition of Myrciaria cauliflora hydroethanolic extract and to evaluate its antimicrobial and antibiofilm action against Staphylococcus aureus (ATCC 6538) and Acinetobacter baumannii (ATCC 19606; multi-resistant clinical strains 58004, 50098, 566006, and H557). Myrciaria cauliflora hydroethanolic extract was prepared, and the content of soluble solids, flavonoids, and phenols was quantified. High-performance liquid chromatography (HPLC) was performed later. The minimum inhibitory concentration was determined using the broth microdilution method according to the Clinical and Laboratory Standards Institute, standard M7-A6, and subsequently, its minimum bactericidal concentration was determined. Then, the most effective concentrations were analyzed against biofilms. Statistical analysis was performed using the ANOVA method with Tukey's test. The soluble solids content in the prepared hydroethanolic extract of M. cauliflora was 2.22%. Additionally, the total flavonoid content, measured using the quercetin standard curve, was 0.040 mg/mL. Furthermore, the total phenol content, determined using the gallic acid standard curve, was 0.729 mg/mL. HPLC analysis presented peaks of gallic acid (11.80 m), p-coumaric acid (12.09 m), cinnamic acid derivative (19.02 m), and ellagic acid (29.83 m). The extract demonstrated antimicrobial and antibiofilm action against all tested strains. However, the most effective antibacterial concentration against all the tested bacteria was 5.55 mg/mL. Therefore, these chemical components justify that M. cauliflora hydroethanolic extract is effective in reducing biofilm formation in S. aureus (standard strain) and A. baumannii (standard and clinical strains).