Antifouling Interface Research Articles

Polydopamine-PEG-Folic Acid Conjugate Film Engineered TiO2 Nanotube Arrays for Photoelectrochemical Sensing of Folate Binding Protein.

Serum-soluble folate binding protein (FBP) is an important tumor marker, and the development of a simple biosensing method is highly needed. In this work, a photoelectrochemical (PEC) biosensor for the detection of FBP was proposed based on the construction of an antifouling interface and the unique ligand-protein recognition. The PEC sensing platform was prepared by the biomimetic polydopamine (PDA) coating on TiO2 nanotubes arrays (NTAs). A significant PEC enhancement effect was obtained due to the macroporous structures. Excellent antifouling performance was achieved by conjugation of amino-group-terminated 8-arm poly(ethylene glycol) (PEG). The incorporation of folic acid (FA) retains the antifouling property and shows recognition abilities toward FBP. The fabricated PEC biosensor shows good analytical performance. The combination of ligand-protein recognition and a PEC antifouling interface provides a good consideration for the development of FBP biosensors.

Increasing the Lifetime of Insulin Cannula with Antifouling and Nitric Oxide Releasing Properties.

Many Type 1 diabetes patients utilize insulin pumps, which rely on a small subcutaneous insulin infusion cannula. However, insulin cannulas still suffer from infection and inflammation, which impacts the wear time of the insulin cannula, reduces the efficiency of insulin infusion, and requires frequent rotation of the insulin infusion site. Infection and inflammation of continuous insulin infusion pump therapy are growing issues and are estimated to cost billions of dollars globally each year. This study aims to develop a potent antibacterial and antifouling insulin cannula with a synergistic effect of bioinspired polymers, integrating antifouling slippery, liquid-infused porous surface technology with an active nitric oxide (NO) releasing polymer. The cannulas were developed by impregnating the NO donor molecule S-nitroso-N-acetylpenicillamine (SNAP) and silicone oil (Si) in commercial medical-grade silicone rubber (SR) tubing (SR-SNAP-Si) via a solvent-impregnation process. The efficiency of the SR-SNAP-Si to reduce protein adsorption and provide antibacterial properties against Staphylococcus aureus and Staphylococcus epidermidis were studied using in vitro bioassays. The SR-SNAP-Si cannula released NO for more than 14 d at physiological levels and were stable during storage for 30 d at room temperature. Scanning electron microscopy images revealed no observable changes to the material surface after the solvent impregnation process. The infusion of silicone oil significantly reduced the protein adsorption on the cannula by 66.40%, and the NO release reduced the viable bacterial cell adhesion of S. epidermidis and S. aureus after 24 h by 94.89% and 99.77%, respectively, as compared to SR controls. This insulin cannula provided continuous NO release and an antifouling interface for more than 14 d and exhibited significant reduction in protein and bacterial adhesion. This method of developing dual-function nitric oxide releasing and antifouling surface for subcutaneous insulin infusion cannulas holds great potential to reduce infection and inflammation associated with insulin pump delivery systems.

Electrochemical Aptasensor for Ultralow Fouling Cancer Cell Quantification in Complex Biological Media Based on Designed Branched Peptides.

The rapid, convenient, and selective assaying of clinical targets directly in complex biological media brings with it the potential to revolutionize diagnostics. One major hurdle to impact is retention of selectivity and a tight control of nonspecific surface interactions or biofouling. We report herein, the construction of an antifouling interface through the covalent attachment of designed branched zwitterionic peptides onto electrodeposited polyaniline film. The antifouling capability of the designed branched peptide significantly outperforms that of the commonly used PEG and linear peptides. The interfaces modified with branched peptides are exceptionally effective in reducing a nonspecific protein and cell adsorption, as verified by electrochemical and fluorescent characterization. The derived sensors with mucin1 protein (MUC1) aptamer as the recognition element detect MUC1-positive MCF-7 breast cancer cells in human serum with high sensitivity and selectivity. The linear response range of the cytosensor for the MCF-7 cell is from 50 to 106 cells/mL, with a limit of detection as low as 20 cells/mL. More importantly, the assaying performances remain unchanged in human serum owing to the presence of branched antifouling peptide, indicating feasibility of the cytosensor for practical cancer cell quantification in complex samples.

Superhydrophobic polypropylene membrane with fabricated antifouling interface for vacuum membrane distillation treating high concentration sodium/magnesium saline water

Vacuum membrane distillation (VMD) is a promising technology for high salinity wastewater treatment. One of the key issues in VMD research is improving the antifouling performance of the hydrophobic porous membrane under proper interface modification theory and approach. In this work, the polypropylene (PP) composite membrane coated with SiO2 nanoparticles and fluorinated modification was fabricated to simultaneously enhance the interface roughness and superhydrophobicity. The fabricated superhydrophobic PP membrane was then applied to treat highly concentrated NaCl (15 wt%)/MgCl2 (from 3 to 9 wt %) saline solution in VMD process under various flow conditions. The model concerning the surface roughness and surface nucleation free energy was constructed to predict the influence of membrane surface structure on potential anti-fouling and anti-wetting properties. Classical heterogeneous nucleation theory was introduced to illuminate the improved performance of developed membrane with targeted surface morphology on inhibiting the initial interfacial nucleation process. The experimental results illustrated the fabricated superhydrophobic PP membrane exhibited unique anti-fouling and anti-wetting abilities, as well as extremely stable permeating flux even under low feed rate and highly concentrated salt solution system during the continuous operation. In addition, it was also indicated that sodium ion and magnesium ion with distinct features in the structure of water-ion solution system had the potential impact on the permeate flux decline and concentration polarization effect, which was helpful for further improving the stability and durability of this series modified membrane when treating the high concentrated multiple solution system.

An antifouling interface integrated with HRP-based amplification to achieve a highly sensitive electrochemical aptasensor for lysozyme detection

We report here a highly sensitive sandwich type electrochemical aptasensor for lysozyme (lys) detection by the integration of an antifouling interface with HRP-based signal amplification. The biosensing interface with antifouling ability is designed, consisting of a lys-binding aptamer (LBA), dithiothreitol (DTT) and mercaptohexanol (MCH). When lys is captured by the immobilized LBA due to the specific recognition of the aptamer, gold nanoparticles (AuNPs) functionalized with HRP and LBA (HRP-AuNP-LBA) are further conjugated to the surface-bound lys, forming a sandwich assay format. HRP catalyzes the chemical oxidation of hydroquinone (HQ) by hydrogen peroxide (H2O2) to produce benzoquinone (BQ) which results in a large electrochemical reduction signal of BQ. Therefore, this reduction signal measured by differential pulse voltammetry (DPV) is used to detect lys. The catalytic behavior of HRP toward the reaction between HQ and H2O2, together with the high loading of HRP on AuNPs, remarkably amplifies the signal. A linear relationship between the DPV response and the logarithm of lys concentration from 0.01 pg mL-1 to 105 pg mL-1 with a detection limit of 0.003 pg mL-1 (S/N = 3) is obtained. The proposed biosensing platform combines antifouling ability and signal amplification, resulting in high sensitivity, providing an effective way for ultrasensitive assay of protein biomarkers in complex media.

Label-free femtomolar cancer biomarker detection in human serum using graphene-coated surface plasmon resonance chips

Sensitive and selective detection of cancer biomarkers is vital for the successful diagnosis of early stage cancer and follow-up treatment. Surface Plasmon Resonance (SPR) in combination with different amplification strategies is one of the analytical approaches allowing the screening of protein biomarkers in serum. Here we describe the development of a point-of-care sensor for the detection of folic acid protein (FAP) using graphene-based SPR chips. The exceptional properties of CVD graphene were exploited to construct a highly sensitive and selective SPR chip for folate biomarker sensing in serum. The specific recognition of FAP is based on the interaction between folic acid receptors integrated through π-stacking on the graphene coated SPR chip and the FAP analyte in serum. A simple post-adsorption of human serum:bovine serum albumin (HS:BSA) mixtures onto the folic acid modified sensor resulted in a highly anti-fouling interface, while keeping the sensing capabilities for folate biomarkers. This sensor allowed femtomolar (fM) detection of FAP, a detection limit well adapted and promising for quantitative clinical analysis.

Cell‐repellant Dextran Coatings of Porous Titania Using Mussel Adhesion Chemistry

The resistance of bioceramics against non-specific adsorption of serum proteins is critical for a wide range of biomedical applications. Some polysaccharides serve as natural protein-resistant molecules in extracellular matrices; however, the stable adhesion of polysaccharides to ceramic biomaterials in an aqueous solution is very challenging because chemical linkages at organic/inorganic interfaces are susceptible to hydrolytic degradation. Here, a catechol-grafted dextran, which strongly binds to titania (TiO2 ) in an aqueous milieu to effectively suppress cell adhesion through anti-fouling activity against non-specific protein adsorption, is introduced. Catechol is conjugated approximately to 6.7 mol% of glucose units of dextran via a carbamate ester linkage, corresponding to roughly three catechols per dextran chain having an average molecular weight of 6 kDa. Multivalent interactions of catechols with a titanium atom, enabled by the graft-type structure, provide a very stable coating of dextran on this inorganic surface. The adhesion of HeLa cells on the dextran-coated titania surface is reduced by 2.4-fold compared to that on a pristine titania surface. These results suggest that the graft-type incorporation of a small number of catechol moieties along a dextran backbone is an effective means of producing a stable anti-fouling interface on inorganic biomaterials in an aqueous environment.

Dendritic Saccharide Surfactant Polymers as Antifouling Interface Materials to Reduce Platelet Adhesion

Here, we report on the synthesis of dendritic saccharide surfactant polymers as antifouling interface materials to reduce platelet adhesion. An acetal-protected poly(amidoamine) (PAMAM) dendron (5, G = 2) was first synthesized by using aminoacetaldehyde dimethyl acetal (1) as the starting material to provide a monovalent focal structure with dimethyl acetal-protected aldehyde functionality. Maltose dendron (M4, 6) was obtained by reacting the peripheral amine groups of acetal-dendron (5) with maltonolactone. The dendritic surfactant polymers (9) were then synthesized via a two-step method by sequential addition of maltose dendron and hexanal to react with the amine groups on the poly(vinylamine) (PVAm) backbone. Surface activity of the amphiphilic glycopolymers at the air/water interface was demonstrated by reduction in water surface tension. Adsorption of the amphiphilic glycopolymers at the solid/water interface was examined on octadecyltrichlorosilane (OTS)-coated coverslips by water contact angle measurements. A nanoscale understanding of surface-induced self-assembly of the dendritic surfactant polymer on highly oriented pyrolytic graphite (HOPG) was gained using AFM operated in fluid tapping mode. A lateral ordering of adsorbing surfactant polymer was visualized with a pattern in strands 60 degrees out of alignment. The static platelet adhesion tests show that the hexyl side chains can facilitate adsorption of the surfactant polymers onto hydrophobic substrates, while the maltose dendron side chains can provide a dense canopy of protective glycocalyx-like layer as an antifouling interface to reduce platelet adhesion.