Release Of Anticancer Drugs Research Articles

Injectable hyaluronic acid–cyclodextrin-based hydrogels for localized and sustained release of anticancer drugs

Injectable hyaluronic acid–cyclodextrin-based hydrogels for localized and sustained release of anticancer drugs

Nanofibers Embedded with Nanoparticles as Carriers for the Controlled Release of Anticancer Drug: Promoting the Apoptosis of Breast Cancer Cell Line and Growth Inhibition of Microbial Strains.

The polymeric nanofiber mats were produced from polylactic acid, methylcellulose, and polyethylene glycol with 5-fluorouracil (5Fu) drug and iron oxide (Fe3O4) nanoparticles. Spectral and crystallographic studies clearly elucidated the ionic interactions, structure and nature of the mats. Fe3O4 nanoparticles <10 nm in size, along with methyl cellulose and polyethylene glycol, have significantly reduced the size of nanofiber mats. The mechanical properties for the mats was found to be challenging; however, surface wettability, swelling capacity, and drug encapsulation efficiency results were promising. A controlled drug release pattern was observed from in vitro drug release study, zero-order kinetics, and a Higuchi model. Nanofiber mats showed higher anticancer activity (78%) against MDA-MB 231 cancer cells, which reveals that a small amount of 5Fu drug (15.86%) with high levels of O2••, H2O2, and OH• radicals generated from Fe3O4 have catalyzed the Fenton's reaction to eradicate the cancer cells, in a shorter span of 24 h, itself. In addition, the apoptosis assay by dual AO/PI staining method clearly exhibited the apoptotic cancer cells by fluorescence microscopy. Incorporation of Fe3O4 nanoparticles enhanced the anticancer activity of the mats, compared to the commercially available standard 5Fu drug. Nanofiber mats significantly controlled the growth of selected pathogenic microbial strains by the action of the 5Fu drug and Fe3+ ions. The degradation of mats was investigated by an in vitro mass loss study for a period of 360 days. In a nutshell, promising nanofiber mats were produced as targeted drug delivery devices for chemotherapy.

Preparation of melamine-functionalized mesoporous silica nanoparticles for delivery of anticancer drugs

The surface-grafted mesoporous silica nanoparticles attract interest in drug delivery, owing to their high drug loading and controlled release potential to the target sites. In this paper, we propose the synthesis of mesoporous silica nanoparticles and their surface grafting using melamine groups for pH-responsive release of anticancer drugs. A model anticancer drug, 5-fluorouracil (5-Fu) was used to encapsulate into the melamine-grafted mesoporous silica nanoparticles (M−MS/5-Fu NPs) using the solvent immersion method. pH and temperature-responsive release behavior of the M−MS/5-Fu NPs were verified at different pH (pH 7.4, 6.5, and 4.0). Further, the in vitro cytotoxicity of the prepared samples was also evaluated on the MCF-7 cell line.

Self-Immolative Domino Dendrimers as Anticancer-Drug Delivery Systems: A Review.

Worldwide cancer statistics have indicated about 20 million new cancer cases and over 10 million deaths in 2022 (according to data from the International Agency for Research on Cancer). One of the leading cancer treatment strategies is chemotherapy, using innovative drug delivery systems (DDSs). Self-immolative domino dendrimers (SIDendr) for triggered anti-cancer drugs appear to be a promising type of DDSs. The present review provides an up-to-date survey on the contemporary advancements in the field of SIDendr-based anti-cancer drug delivery systems (SIDendr-ac-DDSs) through an exhaustive analysis of the discovery and application of these materials in improving the pharmacological effectiveness of both novel and old drugs. In addition, this article discusses the designing, chemical structure, and targeting techniques, as well as the properties, of several SIDendr-based DDSs. Approaches for this type of targeted DDSs for anti-cancer drug release under a range of stimuli are also explored.

Metal organic framework-based polymeric hydrogel: A promising drug delivery vehicle for the treatment of breast cancer

The constraints associated with current cancer therapies have inspired scientists to develop advanced, precise, and safe drug delivery methods. These delivery systems boost treatment effectiveness, minimize harm to healthy cells, and combat cancer recurrence. To design advanced drug delivery vehicle with these character, in the present manuscript, we have designed a self-healing and injectable hybrid hydrogel through synergistically interacting metal organic framework, CuBTC with the poly(vinyl alcohol) (PVA). This hybrid hydrogel acts as a localized drug delivery system and was used to encapsulate and release the anticancer drug 5-Fluorouracil selectively at the targeted site in response to the physiological pH. The hydrogel was formed through transforming the gaussian coil like matrix of PVA-CuBTC into a three-dimensional network of hydrogel upon the addition of crosslinker; borax. The biocompatible character of the hydrogel was confirmed through cell viability test. The biocompatible hybrid hydrogel then was used to encapsulate and studied for the pH responsive release behavior of the anti-cancer drug, 5-FU. The in vitro cytotoxicity of the drug-loaded hydrogel was evaluated against MCF-7 and HeLa cells. The study confirms that the hybrid hydrogel is effective for targeted and sustained release of anticancer drugs at cancer sites.

Osteosarcoma cell death induced by innovative scaffolds doped with chemotherapeutics.

Osteosarcoma (OS) cancer treatments include systemic chemotherapy and surgical resection. In the last years, novel treatment approaches have been proposed, which employ a drug-delivery system to prevent offside effects and improves treatment efficacy. Locally delivering anticancer compounds improves on high local concentrations with more efficient tumour-killing effect, reduced drugs resistance and confined systemic effects. Here, the synthesis of injectable strontium-doped calcium phosphate (SrCPC) scaffold was proposed as drug delivery system to combine bone tissue regeneration and anticancer treatment by controlled release of methotrexate (MTX) and doxorubicin (DOX), coded as SrCPC-MTX and SrCPC-DOX, respectively. The drug-loaded cements were tested in an in vitro model of human OS cell line SAOS-2, engineered OS cell line (SAOS-2-eGFP) and U2-OS. The ability of doped scaffolds to induce OS cell death and apoptosis was assessed analysing cell proliferation and Caspase-3/7 activities, respectively. To determine if OS cells grown on doped-scaffolds change their migratory ability and invasiveness, a wound-healing assay was performed. In addition, the osteogenic potential of SrCPC material was evaluated using human adipose derived-mesenchymal stem cells. Osteogenic markers such as (i) the mineral matrix deposition was analysed by alizarin red staining; (ii) the osteocalcin (OCN) protein expression was investigated by enzyme-linked immunosorbent assay test, and (iii) the osteogenic process was studied by real-time polymerase chain reaction array. The delivery system induced cell-killing cytotoxic effects and apoptosis in OS cell lines up to Day 7. SrCPC demonstrates a good cytocompatibility and it induced upregulation of osteogenic genes involved in the skeletal development pathway, together with OCN protein expression and mineral matrix deposition. The proposed approach, based on the local, sustained release of anticancer drugs from nanostructured biomimetic drug-loaded cements is promising for future therapies aiming to combine bone regeneration and anticancer local therapy.

Design of a prodrug photocage for cancer cells detection and anticancer drug release

Developing probes for simultaneous diagnosis and killing of cancer cells is crucial, yet challenging. This article presents the design and synthesis of a novel Rhodamine B fluorescence probe. The design strategy involves utilizing an anticancer drug (Melphalan) to bind with a fluorescent group (HRhod-OH), forming HRhod-MeL, which is non-fluorescent. However, when exposed to the high levels of reactive oxygen species (ROS) of cancer cells, HRhod-MeL transforms into a red-emitting Photocage (Rhod-MeL), and selectively accumulates in the mitochondria of cancer cells, where, when activated with green light (556 nm), anti-cancer drugs released. The Photocage improve the efficacy of anti-cancer drugs and enables the precise diagnosis and killing of cancer cells. Therefore, the prepared Photocage can detect cancer cells and release anticancer drugs in situ, which provides a new method for the development of prodrugs.

Wireless electrostimulation for cancer treatment: An integrated nanoparticle/coaxial fiber mesh platform

Cancer, namely breast and prostate cancers, is the leading cause of death in many developed countries. Controlled drug delivery systems are key for the development of new cancer treatment strategies, to improve the effectiveness of chemotherapy and tackle off-target effects. In here, we developed a biomaterials-based wireless electrostimulation system with the potential for controlled and on-demand release of anti-cancer drugs. The system is composed of curcumin-loaded poly(3,4-ethylenedioxythiophene) nanoparticles (CUR/PEDOT NPs), encapsulated inside coaxial poly(glycerol sebacate)/poly(caprolactone) (PGS/PCL) electrospun fibers. First, we show that the PGS/PCL nanofibers are biodegradable, which allows the delivery of NPs closer to the tumoral region, and have good mechanical properties, allowing the prolonged storage of the PEDOT NPs before their gradual release. Next, we demonstrate PEDOT/CUR nanoparticles can release CUR on-demand (65 % of release after applying a potential of −1.5 V for 180 s). Finally, a wireless electrostimulation platform using this NP/fiber system was set up to promote in vitro human prostate cancer cell death. We found a decrease of 67 % decrease in cancer cell viability. Overall, our results show the developed NP/fiber system has the potential to effectively deliver CUR in a highly controlled way to breast and prostate cancer in vitro models. We also show the potential of using wireless electrostimulation of drug-loaded NPs for cancer treatment, while using safe voltages for the human body. We believe our work is a stepping stone for the design and development of biomaterial-based future smarter and more effective delivery systems for anti-cancer therapy.

Revolutionizing Cancer Treatment: Biopolymer-Based Aerogels as Smart Platforms for Targeted Drug Delivery.

Cancer stands as a leading cause of global mortality, with chemotherapy being a pivotal treatment approach, either alone or in conjunction with other therapies. The primary goal of these therapies is to inhibit the growth of cancer cells specifically, while minimizing harm to healthy dividing cells. Conventional treatments, often causing patient discomfort due to side effects, have led researchers to explore innovative, targeted cancer cell therapies. Thus, biopolymer-based aerogels emerge as innovative platforms, showcasing unique properties that respond intelligently to diverse stimuli. This responsiveness enables precise control over the release of anticancer drugs, enhancing therapeutic outcomes. The significance of these aerogels lies in their ability to offer targeted drug delivery with increased efficacy, biocompatibility, and a high drug payload. In this comprehensive review, the author discuss the role of biopolymer-based aerogels as an emerging functionalized platforms in anticancer drug delivery. The review addresses the unique properties of biopolymer-based aerogels showing their smart behavior in responding to different stimuli including temperature, pH, magnetic and redox potential to control anticancer drug release. Finally, the review discusses the application of different biopolymer-based aerogel in delivering different anticancer drugs and also discusses the potential of these platforms in gene delivery applications.

A Novel Carrier Based on DNA and Exosome to Sustained Release of 5‐Fluorouracil Anticancer Drug

AbstractThe development of effective drug delivery systems is crucial for improving cancer treatment outcomes. A promising carrier using a combination of DNA and exosomes (EXO) was synthesized to sustain the release of the powerful anticancer drug 5‐fluorouracil (5‐FU). The carrier was prepared by encapsulating 5‐FU‐loaded exosomes (5‐FU.EXO) in the heated DNA carriers (5‐FU.EXO@DNA). Alteration of the DNA structure was studied using molecular dynamics. The physicochemical properties of the carriers were characterized using fourier‐transform infrared spectroscopy (FTIR), field‐emission scanning electron microscopy (FESEM), and dynamic light scattering (DLS). The 5‐FU.EXO@DNA carrier exhibited good stability and biocompatibility, with a uniform size distribution (709±269 nm) and a zeta potential of +312 mV. The interaction between 5‐FU and DNA was confirmed using molecular docking. In vitro release studies showed that both 5‐FU@DNA and 5‐FU.EXO@DNA carriers achieved sustained release of 5‐FU for 576 h, with cumulative releases of approximately 83 % and 89 %, respectively. The 5‐FU release profile showed 40 % release over 86 h. The release rate and other kinetic parameters were also determined. Furthermore, the release kinetics followed by the Korsmeyer‐Peppas model and the diffusion mechanism plays a significant role in controlling the release process.

A Synoptic Update on Smart Lipid Nanocarrier: Cubosomes, and their Design Development, and Recent Challenges.

Cubosomes are a kind of nanoparticle that is distinct from solid particles in that they are liquid crystalline particles formed by self-assembly of a certain surfactant with a current water ratio. Their unique properties as a result of their microstructure are useful in practical applications. Cubosomes, specifically lyotropic nonlamellar liquid crystalline nanoparticles (LCNs) have gained acceptance as a medication delivery strategy for cancer and other disorders. Cubosomes are produced by the fragmentation of a solid-like phase into smaller particles. Because of its particular microstructure, which is physiologically safe and capable of allowing for the controlled release of solubilized compounds, cubic phase particles are garnering considerable attention. These cubosomes are highly adaptable carriers with promising theranostic efficacy because they can be given orally, topically, or intravenously. Throughout its operation, the drug delivery system regulates the loaded anticancer bioactive's target selectivity and drug release characteristics. This compilation examines recent advances and obstacles in the development and application of cubosomes to treat various cancers, as well as the challenges of turning it into a potential nanotechnological invasion.

Lauric acid-based thermosensitive delivery system for the treatment of head and neck squamous cell carcinoma

Traditional treatments for head and neck squamous cell carcinoma (HNSCC) such as surgery, radiation therapy, and chemotherapy, often have severe side effects. Local delivery of chemotherapeutic agents can be a promising approach to minimise systemic toxicity and improve efficacy. Lauric acid (LA), was explored as a novel injectable thermosensitive drug reservoir as a depot for sustained release of anticancer drugs to treat HNSCC. LA was characterised in terms of melting temperature and gelation time. The efficacy of LA-based drug formulations was tested in vitro in a HNSCC cell line and in vivo in a mouse model of HNSCC. LA was modified to have a melting point of 38.5 °C and a gelation time of 40 s at 37.5 °C, rendering it suitable for injection at body temperature. LA- based doxorubicin (DOXO) formulation showed slow release with a maximum of 18% release after 3 days. The in vitro study showed that LA enhanced the cytotoxic effect of DOXO. LA combined with DOXO prevented tumour progression and LA alone significantly reduced the original tumour volume compared to the untreated control group. These findings confirmed that LA can function as practical carrier for the local delivery of chemotherapeutics and provides a safe and simple strategy for the delivery of hydrophobic anticancer drugs and warrant further testing in clinical trials.

Preparation of trivalent rare-earth element-substituted bioactive glass robocast scaffolds for osteosarcoma treatment: structural, morphological, mechanical, drug delivery, and biological properties

In this study, trivalent rare-earth ion (Eu3+, Gd3+, and Yb3+)-substituted silicate-based bioactive glass scaffolds were prepared by robocasting method using sol–gel-derived bioactive glass powders for tissue engineering applications and cancer therapy. The structural, morphological, and mechanical properties of the prepared scaffolds as well as their in vitro bioactivity in simulated body fluid (SBF) were investigated in detail. In addition, an anticancer drug (5-FU) adsorption and release behavior of the scaffolds was studied as a function of time. In vitro, cytotoxicity and alkaline phosphatase activity were investigated using human skin fibroblast BJ and osteosarcoma SaOS-2 cells. Results showed that using lanthanide ion-containing (0.5, 1, 3, and 5 wt%) sol–gel-derived bioactive glass powders it was possible to successfully fabricate periodic, mesh-like patterned robocast glass scaffolds. All of the scaffolds prepared in the study sintered at 675 °C showed an amorphous structure. The compressive strength of scaffolds was in the range of 8.8 MPa to 13.6 MPa and the highest strength values were obtained in the Yb3+-containing scaffolds. Hydroxyapatite formation was obtained for the scaffolds immersed in SBF for 28 days. The fluorouracil adsorption amount was calculated to be ~ 25% for all types of scaffolds and the cumulative drug release was in the range of 20–25% depending on the dopant concentration. Results of the in vitro cell culture experiments revealed that all of the scaffolds fabricated in the study were not cytotoxic to fibroblast and osteosarcoma cells for up to 7 days under in vitro conditions. An increase was obtained for the ALP activities for both types of cells as the incubation time was increased.

Fabrication of a Nanomagnetic Smart Polymer Carrier as a Potential Candidate for a Drug Delivery System

We developed an intelligent device capable of controlled release of anti-cancer drugs. The nano-carrier consists of two key components: firstly, magnetic nanoparticles were synthesized through co-precipitation and then functionalized for attaching anti-cancer drugs; secondly, a polymer (poly(N-isopropylacrylamide-co-acrylic acid)) sensitive to pH and temperature was synthesized and employed to encapsulate the drug-loaded magnetic nanoparticles. This responsive polymer exhibits a lower critical solution temperature (LCST) of 38.5 °C, indicating a phase transition behavior. Numerous techniques and analyses, including Fourier transform infrared spectroscopy, thermogravimetric analysis, zeta potentials, scanning electron microscope, and transmission electron microscopy, were employed to confirm the successful execution of the aforementioned process. In vitro release assessments of the anti-cancer drug, doxorubicin, were conducted across various media (pH 5–8 and temperatures ranging from 20 to 40 °C). The outcomes revealed higher drug releases at temperatures exceeding the LCST (40 °C) and at slightly acidic pH levels (5–5.3). Notably, compared to the effectiveness of the unloaded drug, the magnetic smart polymer loaded with DOX exhibited a more potent cytotoxic effect. Considering these results, this nano-carrier emerges as a promising candidate for targeted therapeutic delivery to cancerous tissues.

Dual-microRNA triggered and DNA-programmed nanomachine for subtype-based detection and tailored treatment of breast cancer cells

Discriminative detection and precise therapy targeting specific subtypes of breast cancers are critical for improving the treatment efficacy and thereby improving the survival rates of patients. Herein, we developed a dual-microRNA triggered DNA-programmed nanomachine for effective discrimination and modulated chemotherapy based on the subtypes of breast cancer cells. Two microRNA stimuli (miR-21 and miR-10b) can trigger the conformation change of the DNA nanomachine assembled on gold nanoparticles (AuNPs) through the toehold-mediated strand displacement reactions (TSDR), during which the fluorescence resonance energy transfer (FRET) signal is generated for microRNA imaging and the loaded doxorubicin (DOX) molecules are released for chemotherapy. The nanomachine can detect miR-10b as low as 0.047 nmol/L (S/N = 3) at a fixed concentration of miR-21 with high selectivity. Moreover, it allows effective discrimination of highly metastatic MDA-MB-231 breast cancer cells from non-metastatic MCF-7 breast cancer cells based on the dual microRNA expression patterns, and adjusts the DOX dosage according to the metastatic activity of cancer. This intelligent nanomachine with controlled release of anti-cancer drug in specific cancer cell subtypes can reduce the side effect to normal cells and facilitate the targeted therapy, which is promising as a theranostics nanoplatform in precise medicine.

Green synthesis of anti-cancer drug-loaded gold nanoparticles for low-intensity pulsed ultrasound targeted drug release.

In the present work, we have designed a one-pot green protocol in which anti-cancer drugs (curcumin and doxorubicin) can be directly loaded on the surface of gold nanoparticles during their formation. We have further demonstrated that low-intensity pulsed ultrasound (LIPUS) can be used to effectively induce the release of anti-cancer drugs from the surface of gold nanoparticles in an ex vivo tissue model. With this protocol, gold nanoparticles can be easily loaded with different types of anticancer drugs, irrespective of their affinity towards water, and even hydrophobic molecules, like curcumin, can be attached onto the gold nanoparticles in an aqueous medium. The method is very simple and straightforward and does not require stirring or mechanical shaking. The drug molecules interact with the gold seeds formed during the reduction and growth process and modulate the final morphology into a spherical shape. A black-colored colloidal solution of gold nanowire networks is formed in the absence of these anti-cancer drug molecules in the reaction mixture. We used hyperspectral-enhanced dark field microscopy to examine the uptake of gold nanoparticles by breast cancer cells. Upon exposure to LIPUS, the release of the anti-cancer drug from the particle surface can be quantified by fluorescence measurements. This release of drug molecules along with trisodium citrate from the surface of gold nanoparticles by ultrasound resulted in their destabilization and subsequent aggregation, which could be visually observed through the change in the color of colloidal sol. Cancer cell viability was studied by MTT assay to examine the efficacy of this nanoparticle-based drug delivery system. Ultraviolet-visible spectroscopy, dynamic light scattering (DLS), and transmission electron microscope (TEM) analysis were used to characterize the nanoparticles and quantify anti-cancer drug release.

Synthesis of cationic gel-coated hydroxyapatite composites for pH- and thermo-responsive drug delivery in tumor microenvironments

Nanomedicine has gained a significant attention in biomedical science and engineering. It involves design and applications of engineered composites for targeted delivery, diagnostics, imaging, and therapeutic efficacy assessment. Herein, multi-stimuli responsive doxorubicin (DOX) loaded composites were prepared and used for controlled anticancer drug release for antitumor efficacy. In this study, we synthesized the HAp@PP composites by coating Pluronic® P123 and branched polyethylenimine (PP nanogel) on hydroxyapatite (HAp) particles. In-vitro cytotoxicity tests emphasized that HAp@PP composites presented a cell viability of more than 80 % before DOX loading. The fabricated HAp@PP–DOX composites indicated a pH-/thermo-reliant DOX release under tumor microenvironment conditions. Furthermore, the Korsmeyer-Peppas kinetic model yielded the best fit for the release of DOX under the conditions studied. The in-vitro assessment revealed that HAp@PP–DOX had a higher effect that free DOX, with a cell viability less than 25 % and 15 %, respectively, at a DOX concentration of 50 μg/mL. In the context of cancer treatment, the composites have the potential to be more effective than traditional chemotherapy by delivering drugs efficiently.

Kinetic Study of Natural Anticancer Drug (Zerumbone) Release from Zeolite Y-Gelatin Hybrid for Oral Controlled Delivery

A hybrid of zeolite Y-gelatin film as an oral dosage form for the natural anticancer drug was achieved by homogenously incorporating the drug-loaded zeolite Y into the gelatin solution. Drug ability was analyzed using computational and experimental approaches, drug encapsulation efficiency via the BET method, and possible interactions by FTIR analyses. Zerumbone released was done in both pH 1.2 and pH 7.4 mimicking the human gastrointestinal tract conditions for 24 hrs and subjected to kinetics study via suitable mathematical models to determine what governs the drug release with the results indicating that a sustained delivery of once-daily oral dosage form could be achieved.

Photoresponsive prodrug-based liposomes for controllable release of the anticancer drug chlorambucil.

The on-demand delivery and release of chemotherapeutic drugs have attracted great attention, among which photoresponsive prodrug systems have shown specific advantages for effective cancer treatment due to their spatiotemporal control, non-invasive nature and easy operation. Unlike the traditional strategy of physical encapsulation of drugs in liposomes, we herein report a biomimetic and photoresponsive drug delivery system (DDS) based on a lipid prodrug liposomal formulation (LNC), which combines the features of the prodrug and nanomedicines, and can realize photocontrollable release of anticancer drugs. The lipid prodrug comprises three functional moieties: a single-arm phospholipid (Lyso PC), an o-nitrobenzyl alcohol (NB) and chlorambucil (CBL). Before irradiation, LNC formed liposomal assemblies in water with an average size of about 200 nm, and upon light irradiation, the efficient photocleavage reaction of NB facilitated the disintegration of liposomal assemblies and the release of drug CBL. Photolysis analysis showed that LNC exhibited accurate and controllable drug release in response to UV 365 nm irradiation. Cell viability assays showed that LNC liposomes demonstrated very low cytotoxicity in the dark and high cellular toxicity upon light irradiation, with toxicity even higher than free CBL. Our results suggest that our photoresponsive lipid prodrug represents a promising strategy to construct controlled DDS for cancer therapy.

A biocompatible double network hydrogel based on poly (acrylic acid) grafted onto sodium alginate for doxorubicin hydrochloride anticancer drug release

This study involved the synthesis of a new biocompatible slow-release hydrogel named poly (acrylic acid) grafted onto sodium alginate (poly (AA-g-SA)) double network hydrogel (DNH). The hydrogel was created by polymerization of acrylic acid grafted onto sodium alginate polysaccharide using crosslinkers N,N′-methylenebisacrylamide and calcium chloride via free radical polymerization. The water absorbency of the poly (AA-g-SA) double network hydrogel was improved by optimizing the quantities of ammonium persulfate initiator, pH-sensitive monomer of acrylic acid, and crosslinkers. Various analytical techniques including attenuated total reflection Fourier-transformed infrared (ATR-FTIR), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), thermal gravimetric analysis (TGA), field emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), atomic force microscopy (AFM), and Brunauer-Emmett-Teller specific surface area analysis (BET) were used to characterize the synthesized hydrogels. The swelling and on-off switching behaviors of the hydrogels were investigated in deionized (DI) water at different temperatures and pH values. The optimum poly (AA-g-SA) DNH was tested for in vitro release of a hydrophilic chemotherapeutic drug, doxorubicin hydrochloride (DOX). The eco-friendly hydrogel favorably optimized the DOX slow release owing to its swelling rate, high absorption and regeneration capabilities. The findings of this study may have significant implications for medical and scientific research.