Antibody Purification Process Research Articles

Resolution of heterogeneous charged antibody aggregates via multimodal chromatography: A comparison to conventional approaches

Clearance of aggregates during protein purification is increasingly paramount as protein aggregates represent one of the major impurities in biopharmaceutical products. Aggregates, especially dimer species, represent a significant challenge for purification processing since aggregate separation coupled with high purity protein recovery can be difficult to accomplish. Biochemical characterization of the aggregate species from the hydrophobic interaction and cation exchange chromatography elution peaks revealed two different charged populations, i.e. heterogeneous charged aggregates, which led to further challenges for chromatographic removal. This paper compares multimodal versus conventional cation exchange or hydrophobic chromatography methodologies to remove heterogeneous aggregates. A full, mixed level factorial design of experiment strategy together with high throughput experimentation was employed to rapidly evaluate chromatographic parameters such as pH, conductivity, and loading. A variety of operating conditions were identified for the multimodal chromatography step, which lead to effective removal of two different charged populations of aggregate species. This multimodal chromatography step was incorporated into a monoclonal antibody purification process and successfully implemented at commercial manufacturing scale.

Evaluation of high‐capacity cation exchange chromatography for direct capture of monoclonal antibodies from high‐titer cell culture processes

Advances in molecular biology and cell culture technology have led to monoclonal antibody titers in excess of 10 g/L. Such an increase can pose concern to traditional antibody purification processes due to limitations in column hardware and binding capacity of Protein A resins. Recent development of high capacity cation exchangers can make cation exchange chromatography (CEX) a promising and economic alternative to Protein A capture. This work investigates the feasibility of using CEX for direct capture of monoclonal antibodies from high titer cell culture fluids. Two resin candidates were selected from seven newer generation cation exchangers for their higher binding capacity and selectivity. Two monoclonal antibodies with widely differing pI values were used to evaluate the capability of CEX as a platform capture step. Screening of loading pH and conductivity showed both resins to be capable of directly capturing both antibodies from undiluted cell culture fluid. At appropriate acidic pH range, product loading of over 65 g/L resin was achieved for both antibodies. A systematic design of experiment (DOE) approach was used to optimize the elution conditions for the CEX step. Elution pH showed the most significant impact on clearance of host cell proteins (HCPs). Under optimal conditions, HCP reduction factors in the range of 9-44 were achieved on the CEX step based on the pI of the antibody. Apart from comparing CEX directly to Protein A as the capture method, material from either modality was also processed through the subsequent polishing steps to compare product quality at the drug substance level. Process performance and product quality was found to be acceptable using the non-affinity based process scheme. The results shown here present a cheaper and higher capacity generic capture method for high-titer antibody processes.

Online integrity monitoring in the Protein A step of mAb Production Processes—increasing reliability and process robustness

The purification of recombinant proteins and antibodies using large packed-bed columns is a key component in most biotechnology purification processes. Because of its efficiency and established practice in the industry, column chromatography is a state of the art technology with a proven capability for removal of impurities, viral clearance, and process efficiency. In general, the validation and monitoring of chromatographic operations-especially of critical process parameters-is required to ensure robust product quality and compliance with health authority expectations. One key aspect of chromatography that needs to be monitored is the integrity of the packed bed, since this is often critical to achieving sufficient separation of protein species. Identification of potential column integrity issues before they occur is important for both product quality and economic efficiency. In this article, we examine how transition analysis techniques can be utilized to monitor column integrity. A case study on the application of this method during a large scale Protein A capture step in an antibody purification process shows how it can assist with improving process knowledge and increasing the efficiency of manufacturing operations.

Enveloped virus inactivation using neutral arginine solutions and applications in therapeutic protein purification processes

For the manufacturing of recombinant protein therapeutics produced from mammalian cell culture, demonstrating the capacity of the purification process to effectively clear infectious viruses is a regulatory requirement. At least two process steps, using different mechanisms of virus removal and/or inactivation, should be validated in support of the regulatory approval process. For example, exposure of the product stream to low pH, detergents or solvent/detergent combinations is commonly incorporated in protein purification processes for the inactivation of lipid-enveloped viruses. However, some proteins have limited stability at low pH or in the presence of the detergents, and alternative techniques for achieving the inactivation of enveloped viruses would be beneficial. We present here an alternative and novel approach for the rapid inactivation of enveloped viruses using pH-neutral buffer solutions containing arginine. The implementation of this approach in a monoclonal antibody or Fc-fusion protein purification process is described and illustrated with several different therapeutic proteins. The use of the neutral pH arginine solution was able to effectively inactivate two enveloped model viruses, with no measurable effect on the product quality of the investigated proteins. Thus, the use of pH-neutral arginine containing buffer solutions provides an alternative means of virus inactivation where other forms of virus inactivation, such as low pH and/or solvent/detergent treatments are not possible or undesirable due to protein stability limitations.

Customization of copolymers to optimize selectivity and yield in polymer‐driven antibody purification processes

This manuscript describes customization of copolymers to be used for polymer-driven protein purification in bioprocessing. To understand how copolymer customization can be used for fine-tuning, precipitation behavior was analyzed for five target antibodies (mAbs) and BSA as model impurity protein, at ionic strength similar to undiluted cell culture fluid. In contrast to the use of standardized homopolymers, customized copolymers, composed of 2-acrylamido-2-methylpropane sulfonic acid (AMPS) and 4-(acryloylamino)benzoic acid (ABZ), exhibited antibody precipitation yields exceeding 90%. Additionally, copolymer average molecular weight (Mw ) was varied and its influence on precipitation yield and contaminant coprecipitation was investigated. Results revealed copolymer composition as the major driving force for precipitation selectivity, which was also dependent on protein hydrophobicity. By adjusting ABZ content and Mw of the precipitant for each of the mAbs, conditions were found that allowed for high precipitation yield and selectivity. These findings may open up new avenues for using polymers in antibody purification processes.

Designing cost‐effective biopharmaceutical facilities using mixed‐integer optimization

Chromatography operations are identified as critical steps in a monoclonal antibody (mAb) purification process and can represent a significant proportion of the purification material costs. This becomes even more critical with increasing product titers that result in higher mass loads onto chromatography columns, potentially causing capacity bottlenecks. In this work, a mixed-integer nonlinear programming (MINLP) model was created and applied to an industrially relevant case study to optimize the design of a facility by determining the most cost-effective chromatography equipment sizing strategies for the production of mAbs. Furthermore, the model was extended to evaluate the ability of a fixed facility to cope with higher product titers up to 15 g/L. Examination of the characteristics of the optimal chromatography sizing strategies across different titer values enabled the identification of the maximum titer that the facility could handle using a sequence of single column chromatography steps as well as multi-column steps. The critical titer levels for different ratios of upstream to dowstream trains where multiple parallel columns per step resulted in the removal of facility bottlenecks were identified. Different facility configurations in terms of number of upstream trains were considered and the trade-off between their cost and ability to handle higher titers was analyzed. The case study insights demonstrate that the proposed modeling approach, combining MINLP models with visualization tools, is a valuable decision-support tool for the design of cost-effective facility configurations and to aid facility fit decisions. 2013.

Purification of monoclonal antibodies by hydrophobic interaction chromatography under no-salt conditions

Hydrophobic interaction chromatography (HIC) is commonly used as a polishing step in monoclonal antibody purification processes. HIC offers an orthogonal selectivity to ion exchange chromatography and can be an effective step for aggregate clearance and host cell protein reduction. HIC, however, suffers from the limitation of use of high concentrations of kosmotropic salts to achieve the desired separation. These salts often pose a disposal concern in manufacturing facilities and at times can cause precipitation of the product. Here, we report an unconventional way of operating HIC in the flowthrough (FT) mode with no kosmotropic salt in the mobile phase. A very hydrophobic resin is selected as the stationary phase and the pH of the mobile phase is modulated to achieve the required selectivity. Under the pH conditions tested (pH 6.0 and below), antibodies typically become positively charged, which has an effect on its polarity and overall surface hydrophobicity. Optimum pH conditions were chosen under which the antibody product of interest flowed through while impurities such as aggregates and host cell proteins bound to the column. This strategy was tested with a panel of antibodies with varying pI and surface hydrophobicity. Performance was comparable to that observed using conventional HIC conditions with high salt.

Quality by design approach for viral clearance by protein a chromatography.

Protein A chromatography is widely used as a capture step in monoclonal antibody (mAb) purification processes. Antibodies and Fc fusion proteins can be efficiently purified from the majority of other complex components in harvested cell culture fluid (HCCF). Protein A chromatography is also capable of removing modest levels of viruses and is often validated for viral clearance. Historical data mining of Genentech and FDA/CDER databases systematically evaluated the removal of model viruses by Protein A chromatography. First, we found that for each model virus, removal by Protein A chromatography varies significantly across mAbs, while remains consistent within a specific mAb product, even across the acceptable ranges of the process parameters. In addition, our analysis revealed a correlation between retrovirus and parvovirus removal, with retrovirus data generally possessing a greater clearance factor. Finally, we describe a multivariate approach used to evaluate process parameter impacts on viral clearance, based on the levels of retrovirus-like particles (RVLP) present among process characterization study samples. It was shown that RVLP removal by Protein A is robust, that is, parameter effects were not observed across the ranges tested. Robustness of RVLP removal by Protein A also correlates with that for other model viruses such as X-MuLV, MMV, and SV40. The data supports that evaluating RVLP removal using process characterization study samples can establish multivariate acceptable ranges for virus removal by the protein A step for QbD. By measuring RVLP instead of a model retrovirus, it may alleviate some of the technical and economic challenges associated with performing large, design-of-experiment (DoE)—type virus spiking studies. This approach could also serve to provide useful insight when designing strategies to ensure viral safety in the manufacturing of a biopharmaceutical product.

Development of a novel and efficient cell culture flocculation process using a stimulus responsive polymer to streamline antibody purification processes.

Recent advances in mammalian cell culture processes have significantly increased product titers, but have also resulted in substantial increases in cell density and cellular debris as well as process and product related impurities. As such, with improvements in titer, corresponding improvements in downstream processing are essential. In this study we have developed an alternative antibody harvest process that incorporates flocculation using a novel stimulus responsive polymer, benzylated poly(allylamine), followed by depth filtration. As tested on multiple antibodies, this process demonstrates high process yield, improved clearance of cells and cell debris, and efficient reduction of aggregates, host cell proteins (HCP) and DNA. A wide operating window was established for this novel flocculation process through design of experiments condition screening and optimization. Residual levels of impurities in the Protein A eluate were achieved that potentially meet requirements of drug substance and thus alleviate the burden for further impurities removal in subsequent chromatography steps. In addition, efficient clearance of residual polymer was demonstrated using a fluorescence tagged polymer in the presence of a stimulus reagent. The mechanism of HCP and aggregates removal during flocculation was also explored. This novel and efficient process can be easily integrated into current mAb purification platforms, and may overcome downstream processing challenges. Biotechnol. Bioeng. 2013;110: 2928–2937. © 2013 Wiley Periodicals, Inc.

Mid‐infrared spectroscopy‐based antibody aggregate quantification in cell culture fluids

Therapeutic antibody purification involves several steps which potentially induce antibody aggregation. Currently, aggregate monitoring mainly employs chromatographic, SDS-PAGE and light scattering techniques. In this study, the feasibility of mid-infrared spectroscopy (MIR) for the quantification of soluble antibody aggregates was investigated. Several multivariate models were evaluated to quantify antibody aggregation in chromatography elution streams and in clarified CHO cell culture supernatants (a surrogate for bioreactor output). A general model was established that is applicable for aggregate quantification directly from different cell culture solutions. Real-process samples and process-sample mimics were used to verify the general aggregate quantification model using two different antibodies. Results showed good prediction ability down to 1% aggregate content. Together with recently published results using MIR for host cell protein and target protein quantification, the results presented here indicate that MIR could provide multi-parameter process information from a single, fast, cost-effective and straightforward measurement. In conclusion, our study demonstrates that MIR is suitable for aggregate quantification in therapeutic antibody purification processes.

Fast and scalable purification of a therapeutic full‐length antibody based on process crystallization

The potential of process crystallization for purification of a therapeutic monoclonal IgG1 antibody was studied. The purified antibody was crystallized in non-agitated micro-batch experiments for the first time. A direct crystallization from clarified CHO cell culture harvest was inhibited by high salt concentrations. The salt concentration of the harvest was reduced by a simple pretreatment step. The crystallization process from pretreated harvest was successfully transferred to stirred tanks and scaled-up from the mL-scale to the 1 L-scale for the first time. The crystallization yield after 24 h was 88-90%. A high purity of 98.5% was reached after a single recrystallization step. A 17-fold host cell protein reduction was achieved and DNA content was reduced below the detection limit. High biological activity of the therapeutic antibody was maintained during the crystallization, dissolving, and recrystallization steps. Crystallization was also performed with impure solutions from intermediate steps of a standard monoclonal antibody purification process. It was shown that process crystallization has a strong potential to replace Protein A chromatography. Fast dissolution of the crystals was possible. Furthermore, it was shown that crystallization can be used as a concentrating step and can replace several ultra-/diafiltration steps. Molecular modeling suggested that a negative electrostatic region with interspersed exposed hydrophobic residues on the Fv domain of this antibody is responsible for the high crystallization propensity. As a result, process crystallization, following the identification of highly crystallizable antibodies using molecular modeling tools, can be recognized as an efficient, scalable, fast, and inexpensive alternative to key steps of a standard purification process for therapeutic antibodies.

Structure and protein adsorption mechanisms of clean and fouled tentacle-type anion exchangers used in a monoclonal antibody polishing step

The properties of Fractogel® EMD TMAE HiCap (M), a tentacle-type anion exchange resin used for a polishing step in a monoclonal antibody (mAb) purification process, were investigated for both virgin and used samples to determine the influence of process related fouling. Inverse size exclusion chromatography indicated a bimodal distribution of pore sizes consisting mostly of small pores, 4–5nm in radius and likely associated with the grafted tentacles. Similar results were obtained for resin samples fouled by process use, indicating that the core structure of these particles is unchanged. Transmission electron micrographs showed that the resin backbone matrix has a microgranular structure. However, a dense skin layer, 0.2–0.5μm thick, was also seen at the exterior surface of the fouled particles. The binding capacity attained for BSA after 90min of contact was 165±4mg/mL for both virgin and fouled samples, close to the equilibrium capacity of 178±2mg/mL attained after 24h. On the other hand, the capacities attained at 90min for the much larger thyroglobulin were only 90±4 and 25±2mg/mL, respectively, for virgin and fouled samples. The BSA adsorption kinetics was also slower for the fouled resin, but much larger kinetic differences between virgin and fouled resin were seen for thyroglobulin. Based on the shape of intraparticle protein concentration profiles determined by confocal laser scanning microscopy (CLSM), the protein transport mechanism is consistent with solid diffusion for both virgin and fouled resin samples and proteins. However, transport is hindered by the foulant layer to a much greater extent for thyroglobulin as a result of its larger size. Additional measurements indicated that the foulant layer is consistent with mAb aggregates irreversibly bound at the particle exterior surface.

A multi-level meta-heuristic algorithm for the optimisation of antibody purification processes

Multi-product biopharmaceutical facilities need flexible process configurations that can adapt to products with diverse characteristics and impurity loads so as to avoid bottlenecks and delays, whilst meeting final product specifications and cost targets. In order to aid the design of such facilities, this work presents a meta-heuristic optimisation approach using genetic algorithms where different levels of decision are addressed (facility, product sequence and unit operation) and multiple process and business criteria are used to evaluate each alternative generated. This is applied to a case study on the production of therapeutic monoclonal antibodies (mAbs), with a focus on the optimal purification sequences and chromatography column sizing strategies to cope with different facility configurations of upstream and downstream trains and different product impurity loads. The industrial case study provides novel insights that allow the identification of the most cost-effective purification sequences and column sizing strategies that meet demand and purity targets for each product in the facility. Emphasis is placed also on providing methods to visualise the trade-offs in the set of optimal solutions with similar cost values so as to enhance the decision making process.

The dynamics of the CHO host cell protein profile during clarification and protein A capture in a platform antibody purification process

Recombinant protein products such as monoclonal antibodies (mAbs) for use in the clinic must be clear of host cell impurities such as host cell protein (HCP), DNA/RNA, and high molecular weight immunogenic aggregates. Despite the need to remove and monitor HCPs, the nature, and fate of these during downstream processing (DSP) remains poorly characterized. We have applied a proteomic approach to investigate the dynamics and fate of HCPs in the supernatant of a mAb producing cell line during early DSP including centrifugation, depth filtration, and protein A capture chromatography. The primary clarification technique selected was shown to influence the HCP profile that entered subsequent downstream steps. MabSelect protein A chromatography removed the majority of contaminating proteins, however using 2D-PAGE we could visualize not only the antibody species in the eluate (heavy and light chain) but also contaminant HCPs. These data showed that the choice of secondary clarification impacts upon the HCP profile post-protein A chromatography as differences arose in both the presence and abundance of specific HCPs when depth filters were compared. A number of intracellularly located HCPs were identified in protein A elution fractions from a Null cell line culture supernatant including the chaperone Bip/GRP78, heat shock proteins, and the enzyme enolase. We demonstrate that the selection of early DSP steps influences the resulting HCP profile and that 2D-PAGE can be used for monitoring and identification of HCPs post-protein A chromatography. This approach could be used to screen cell lines or hosts to select those with reduced HCP profiles, or to identify HCPs that are problematic and difficult to remove so that cell-engineering approaches can be applied to reduced, or eliminate, such HCPs.

Decisional tool to assess current and future process robustness in an antibody purification facility

Increases in cell culture titers in existing facilities have prompted efforts to identify strategies that alleviate purification bottlenecks while controlling costs. This article describes the application of a database-driven dynamic simulation tool to identify optimal purification sizing strategies and visualize their robustness to future titer increases. The tool harnessed the benefits of MySQL to capture the process, business, and risk features of multiple purification options and better manage the large datasets required for uncertainty analysis and optimization. The database was linked to a discrete-event simulation engine so as to model the dynamic features of biopharmaceutical manufacture and impact of resource constraints. For a given titer, the tool performed brute force optimization so as to identify optimal purification sizing strategies that minimized the batch material cost while maintaining the schedule. The tool was applied to industrial case studies based on a platform monoclonal antibody purification process in a multisuite clinical scale manufacturing facility. The case studies assessed the robustness of optimal strategies to batch-to-batch titer variability and extended this to assess the long-term fit of the platform process as titers increase from 1 to 10 g/L, given a range of equipment sizes available to enable scale intensification efforts. Novel visualization plots consisting of multiple Pareto frontiers with tie-lines connecting the position of optimal configurations over a given titer range were constructed. These enabled rapid identification of robust purification configurations given titer fluctuations and the facility limit that the purification suites could handle in terms of the maximum titer and hence harvest load.

High‐throughput methods for miniaturization and automation of monoclonal antibody purification processes

In the last decade, high-throughput downstream process development techniques have entered the biopharmaceutical industry. As chromatography is the standard downstream purification method, several high-throughput chromatographic methods have been developed and applied including miniaturized chromatographic columns for utilization on liquid handling stations. These columns were used to setup a complete downstream process on a liquid handling station for the first time. In this article, a monoclonal antibody process was established in lab-scale and miniaturized afterwards. The scale-down methodology is presented and discussed. Liquid handling in miniaturized single and multicolumn processes was improved and applicability was demonstrated by volume balances. The challenges of absorption measurement are discussed and strategies were shown to improve volume balances and mass balances in 96-well microtiter plates. The feasibility of miniaturizing a complete downstream process was shown. In the future, analytical bottlenecks should be addressed to gain the full benefit from miniaturized complete process development.

Effects of resin ligand density on yield and impurity clearance in preparative cation exchange chromatography. I. Mechanistic evaluation

The effects of resin ligand density on cation exchange chromatography performance in preparative monoclonal antibody purification processes were evaluated. A set of agarose-based cation exchange resins spanning a relatively wide range of ligand densities was tested using three different monoclonal antibodies with unique impurity profiles. Experiments were performed in bind-and-elute mode using gradient elution at both intermediate protein loadings and near saturation capacity. Ligand density did not affect clearance of high molecular weight variants under any of the conditions tested; however, ligand density did affect resolution of a basic charge variant in one case and changed host cell protein clearance in another instance. In general, the results indicate that the relationships between ligand density, retention, and resolution are affected by both characteristic charge and protein surface charge distribution.

Single pass tangential flow filtration to debottleneck downstream processing for therapeutic antibody production

As the therapeutic monoclonal antibody (mAb) market continues to grow, optimizing production processes is becoming more critical in improving efficiencies and reducing cost-of-goods in large-scale production. With the recent trends of increasing cell culture titers from upstream process improvements, downstream capacity has become the bottleneck in many existing manufacturing facilities. Single Pass Tangential Flow Filtration (SPTFF) is an emerging technology, which is potentially useful in debottlenecking downstream capacity, especially when the pool tank size is a limiting factor. It can be integrated as part of an existing purification process, after a column chromatography step or a filtration step, without introducing a new unit operation. In this study, SPTFF technology was systematically evaluated for reducing process intermediate volumes from 2× to 10× with multiple mAbs and the impact of SPTFF on product quality, and process yield was analyzed. Finally, the potential fit into the typical 3-column industry platform antibody purification process and its implementation in a commercial scale manufacturing facility were also evaluated. Our data indicate that using SPTFF to concentrate protein pools is a simple, flexible, and robust operation, which can be implemented at various scales to improve antibody purification process capacity.

Exploring variation in binding of Protein A and Protein G to immunoglobulin type G by isothermal titration calorimetry

Bacterial Protein A (PrtA) and Protein G (PrtG) are widely used for affinity purification of antibodies. An understanding of how PrtA and PrtG bind to different isotypes of immunoglobulin type G (IgG) and to their corresponding Fc fragments is essential for the development of PrtA and PrtG mimetic ligands and for the establishment of generic processes for the purification of various antibodies. In this paper, the interactions between the two IgG-binding proteins and IgG of two different subclasses, IgG1 and IgG4, as well as their analogous Fc fragments have been studied by isothermal titration calorimetry. The results indicate that both protein ligands bind IgG and Fc fragments strongly with Ka values in the range of 10(7) -10(8) M(-1) and for both ligands, the interaction with both IgG isotypes is enthalpically driven though entropically unfavorable. Moreover, variation in the standard entropic and standard enthalpic contribution to binding between the two isotypes as well as between IgG and Fc fragment implies that the specific interaction with PrtA varies according to IgG isotype. In contrast to PrtA, PrtG bound to F(ab')(2) fragment with a Ka value of 5.1 × 10(5) M(-1) ; thus underscoring the usefulness of PrtA as a preferred ligand for generic antibody purification processes.

Cation exchange chromatography provides effective retrovirus clearance for antibody purification processes

One measure taken to ensure safety of biotherapeutics produced in mammalian cells is to demonstrate the clearance of potential viral contaminants by downstream purification processes. This paper provides evidence that cation exchange chromatography (CEX), a widely used polishing step for monoclonal antibody (mAb) production, can effectively and reproducibly remove xMuLV, a retrovirus used as a model of non-infectious retrovirus-like particles found in Chinese hamster ovary cells. The dominant mechanism for xMuLV clearance by the strong cation exchanger, Fractogel SO ₃⁻, is by retention of the virus via adsorption instead of inactivation. Experimental data defining the design space for effective xMuLV removal by Fractogel SO ₃⁻ with respect to operational pH, elution ionic strength, loading, and load/equilibration buffer ionic strength are provided. Additionally, xMuLV is able to bind to other CEX resins, such as Fractogel COO⁻ and SP Sepharose Fast Flow, suggesting that this phenomenon is not restricted to one type of CEX resin. Taken together, the data indicate that CEX chromatography can be a robust and reproducible removal step for the model retrovirus xMuLV.