Anode For Lithium-ion Batteries Research Articles

Formation of nanosized copper silicides in a high-speed electric discharge plasma jet

Relevance. The search for suitable materials for creating a new generation of anodes in lithium-ion batteries that have not only high capacity, but also high electrical conductivity. For this purpose, the attempts have been made to use silicon Si, which has a high specific capacitance, instead of graphite C, but this material does not have high electrical conductivity. Copper silicides, in addition to high specific capacity, have high electrical conductivity values, since they do not react with lithium during operation, and therefore can be used to solve problems in the development of the above-mentioned lithium-ion anodes. Aim. To obtain dispersed materials in a high-speed jet of electric discharge plasma in the Cu-Si-C system. Objects. Dispersed materials obtained in the Cu-Si-C system. Methods. Plasma dynamic synthesis, X-ray diffractometry (X-ray phase analysis), scanning electron microscopy, transmission electron microscopy. Results. The authors have carried out the experimental studies to obtain dispersed materials of the Cu-Si-C system in a high-speed electric-discharge plasma jet and studied the microstructure and composition of the synthesized materials. It was revealed that the product consists of nanodispersed particles, which is confirmed by the results of scanning and electron microscopy. According to the results of X-ray diffractometry, crystalline phases of copper of the cubic system and copper silicides Cu3Si and Cu7Si of the hexagonal system are identified in the composition of the synthesized material.

Novel Three-Dimensional Skeleton Structure Li-B Alloys as Anode for Solid-State Lithium Batteries

Novel Three-Dimensional Skeleton Structure Li-B Alloys as Anode for Solid-State Lithium Batteries

Dual carbon protected ultrafine SnO2 nanoparticles with Sn–C interface for robust lithium storage

Stannic oxide (SnO2)-based lithium-ion batteries (LIBs) have garnered tremendous attention due to their high theoretical capacity and suitable lithium ion insertion potential. However, their widespread applications have been hindered by severe electrode degradation caused by substantial volume expansion of SnO2. In this study, we embedded amorphous carbon encapsulated ultrafine SnO2 nanoparticles on hollow macroporous carbon (AC@SnO2/HMC) as a superior anode material for LIBs. The unique Sn–C interface and dual carbon protection layers effectively mitigated SnO2 nanoparticle agglomeration and volume expansion, reinforcing the cycling stability. Additionally, the capacitive contribution from amorphous carbon significantly improved the reversible capacity and rate capability. As such, the resulting AC@SnO2/HMC electrode exhibited high capacity (1828 mAh g−1 after 200 cycles at 0.1 A g−1), excellent rate capability (1017.6 mAh g−1 at 1 A g−1), and outstanding cycling performance (792.1 mAh g−1 after 880 cycles at 2 A g−1), surpassing previously reported SnO2-based anodes. Furthermore, the AC@SnO2/HMC-based Li-ion full cell demonstrated a remarkable capacity of 566.3 mAh g−1 at 0.2 A g−1 after 200 cycles. This study offers valuable insights into the development of advanced SnO2-based anodes for LIBs and beyond, highlighting their potential for future advancements in battery technology.

Deciphering the structural and kinetic factors in lithium titanate for enhanced performance in Li+/Na+ dual-cation electrolyte

The widespread application of Li4Ti5O12 (LTO) anode in lithium-ion batteries has been hindered by its relatively low energy density. In this study, we investigated the capacity enhancement mechanism of LTO anode through the incorporation of Na+ cations in an Li+-based electrolyte (dual-cation electrolyte). LTO thin film electrodes were prepared as conductive additive-free and binder-free model electrodes. Electrochemical performance assessments revealed that the dual-cation electrolyte boosts the reversible capacity of the LTO thin film electrode, attributable to the additional pseudocapacitance and intercalation of Na+ into the LTO lattice. Operando Raman spectroscopy validated the insertion of Li+/Na+ cations into the LTO thin film electrode, and the cation migration kinetics were confirmed by ab initio molecular dynamic (AIMD) simulation and electrochemical impedance spectroscopy, which revealed that the incorporation of Na+ reduces the activation energy of cation diffusion within the LTO lattice and improves the rate performance of LTO thin film electrodes in the dual-cation electrolyte. Furthermore, the interfacial charge transfer resistance in the dual-cation electrolyte, associated with ion de-solvation processes and traversal of the cations in the solid-electrolyte interphase (SEI) layer, are evaluated using the distribution of relaxation time, Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. Our approach of performance enhancement using dual-cation electrolytes can be extrapolated to other battery electrodes with sodium/lithium storage capabilities, presenting a novel avenue for the performance enhancement of lithium/sodium-ion batteries.

A Novel Spinel High-Entropy Oxide (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 as Anode Material for Lithium-Ion Batteries

In this study, we synthesized spinel high-entropy oxide (HEO) (Cr0.2Mn0.2Co0.2Ni0.2Zn0.2)3O4 nanoparticles by a simple solution combustion method. These particles were investigated for their performance as anodes in lithium-ion batteries. The reversible capacity is 132 mAh·g−1 after 100 cycles at a current density of 100 mA·g−1, 107 mAh·g−1 after 1000 cycles at a current density of 1 A g−1, and 96 mAh·g−1 rate capacity at a high current density of 2 A g−1. The outstanding cycle stability under high current densities and remarkable rate performance can be attributed to the stable structure originating from the high entropy of the material.

Tailored synthesis of a unique two-dimensional pretzel-like core-shell SnO2/C composite for improved lithium storage performance

In this research, a unique two-dimensional (2D) core-shell SnO2/C composite with a distinctive pretzel-like morphology was successfully synthesized using the tin-citrate complex as the tin source, and glucose as the carbon source through a hydrothermal synthesis, and followed by a high-temperature carbonization process. When assessed as an anode for lithium-ion batteries (LIBs), the composite demonstrated a significant specific capacity of 529 mAh g−1 at a current density of 200 mA g−1 after 100 cycles. Furthermore, it maintained ca. 200 mAh g−1 at a high current density of 1.6 A g−1, indicating excellent cycling stability and rate capability. The remarkable electrochemical performance can be ascribed to the well-dispersed nanoscale SnO2 particles within the amorphous carbon matrix, the distinctive core-shell structure and 2D pretzel-like conductive network. The prepared SnO2/C composite can be a promising alternative anode for future LIBs, offering higher energy density, prolonged cycle life, and faster charging capability compared to traditional graphite-based anodes.

The role of carbon component on the electrochemical performances of Ti0.95Nb0.95O4/C composites as anode of lithium-ion batteries

The role of carbon component on the electrochemical performances of Ti0.95Nb0.95O4/C composites as anode of lithium-ion batteries

A Novel Gelatin Binder with Helical Crosslinked Network for High-Performance Si Anodes in Lithium-Ion Batteries.

Silicon(Si) is a promising anode material for lithium-ion batteries, but its large volume expansion during cycling poses a challenge for the binder design. In this study, a novel gelatin binder is designed and prepared with a helical crosslinked network structure. This gelatin binder is prepared by enzymatic crosslinking and immersion in Hofmeister salt solution, which induces the formation of network and helical secondary structures. The helical crosslinked network structure can be analogous to a spring group system to effectively dissipate the stress and strain caused by the Si expansion. The gelatin binder is further partially carbonized by low-temperature pyrolysis, which improves its conductivity and stability. The Sianode with the optimized gelatin binder exhibits high initial coulombic efficiency, excellent rate performance, and long-term cycling stability. This study provides an innovative approach for the preparation of high-performance Si anodes, namely by controlling the molecular configuration of the binder to significantly improve the cycle stability, which can also be applied to other high-capacity anode materials that suffer from large volume changes during cycling.

A Triple Crosslinked Binder with Hierarchical Stress Dissipation and High Ionic Conductivity for Advanced Silicon Anodes in Lithium-ion Batteries.

Silicon (Si) is a promising anode material for high-energy-density lithium-ion batteries, but the significant volume change of Si particles during alloying/dealloying with lithium (Li) undermines the mechanical integrity of Si anode, causing electrode fracture, delamination and rapid capacity decay. Herein, a robust triple crosslinked network (TCN) binder with high ionic conductivity and hierarchical stress dissipation is reported for Si anodes, which is prepared by in situ chemical crosslinking polyacrylic acid (PAA) and melamine (MA). The triple interactions of hydrogen bonds, electrostatic interactions, and covalent amide bonds enhance the adhesion of binder to Si and synergistically promote stress dissipation within Si anodes, thus strengthening the dynamic structural stability of Si anodes during cycling. Moreover, the rapid coupling/decoupling of Li+ with the TCN binder enables an impressive Li+ transference number of 0.63 and high ionic conductivity of 1.2 × 10-4 Scm-1. Consequently, the Si-TCN anode delivers specific capacity of 2268 mAhg-1 with a high mass loading of 2mgcm-2, high-rate performance of 1673 mAhg-1 at 5 Ag-1, and stable cycling for 250 cycles at 1 Ag-1, thus showing great prospects for high-energy-density Si-based batteries.

Hierarchical Nanoporous N-Doped Carbon for Enhanced Rate Performance of Lithium-Ion Battery Anodes

Hierarchical Nanoporous N-Doped Carbon for Enhanced Rate Performance of Lithium-Ion Battery Anodes

Coaxial electrospinning synthesis free-standing Sn/TiO2 flexible carbon fibers with sheath/core structure for advanced flexible lithium/potassium-ion batteries

Flexible Sn/TiO2 carbon nanofiber (ST-NCF) composites were constructed by doping TiO2 into tin-based carbon nanofibers via coaxial electrospinning. Sn/TiO2 carbon nanofiber was directly used as an anode for Lithium-ion Batteries (LIBs) and Potassium-ion Batteries (PIBs), which show exceptional electrochemical performances. The layered sheath/core structure of the material lead to its good electrochemical properties, where the core Sn carbon nanofiber was encapsulated by the sheath layer of TiO2 nanoparticles. In addition to enhancing its electrical conductivity, the outer TiO2 and N-doped carbon fiber matrix also provide a buffer zone for volumetric strain during charging and discharging. The fiber core Sn and sheath TiO2 form a heterojunction interface on the two-dimensional tube surface, which increases the diffusion rate of ions and electrons. After 100 cycles, TiO2-NCF and ST-NCF-40%TBT (40% TBT indicates the percentage of TiO2 in shell solution to the total composition of shell spinning solution) show capacities of 386.6 mAh g−1 and 1336 mAh g-1, respectively, at 0.5A g-1. After 2000 cycles, ST-NCF-40%TBT in LIBs displayed a high capacity of 299 mAh g-1 at 10 A g-1. After 350 cycles at 1A g-1, the capacity of ST-NCF-40%TBT in PIBs is reserved at 307 mA h g-1. Due to the superior mechanical flexibility of ST-NCF-40%TBT films, it will be a promising anode candidate for flexible LIBs and PIBs.

The timescale identification and quantification of complicated kinetic processes in lithium-ion batteries based on micro-reference electrodes

The lack of reliable methods for acquiring accurate and stable electrochemical impedance spectroscopy (EIS) data at both the cathode and anode makes overlapping kinetic processes in commercial lithium-ion batteries (LIBs) with enhanced capacity and size indistinguishable. Micro-reference electrodes offer an elegant solution for obtaining accurate and stable EIS data for both the cathode and anode. The proposed selection model ensures that the mean absolute percentage error between the EIS of the combined cathode and anode and the battery remains below 3.5 % under varying temperatures and states of charge (SOCs). Different SOCs, temperatures, and pressures are utilized on the timescale to identify and quantify the kinetic processes of the cathode and anode. The results indicate that under varying temperature conditions, the process of Li+ traversing the solid electrolyte interphase dominates the total impedance of the battery, contributing over 75 %. At −10 °C, polarization resistance from this process exceeds a 2500 % increase compared to 20 °C. Moreover, the variations in the kinetic processes of LIB cathodes and anodes with temperature are revealed on the timescale, with potential reasons for the overlap of kinetic processes provided. This study offers new insights into LIB electrode kinetics and lays a theoretical groundwork for enhancing battery design and performance.

Dual-Function Alloying Nitrate Additives Stabilize Fast-Charging Lithium Metal Batteries.

Lithium metal is regarded as the "holy grail" of lithium-ion battery anodes due to its exceptionally high theoretical capacity (3800 mAh g-1) and lowest possible electrochemical potential (-3.04 V vs Li/Li+); however, lithium suffers from the dendritic formation that leads to parasitic reactions and cell failure. In this work, we stabilize fast-charging lithium metal plating/stripping with dual-function alloying M-nitrate additives (M: Ag, Bi, Ga, In, and Zn). First, lithium metal reduces M, forming lithiophilic alloys for dense Li nucleation. Additionally, nitrates form ionically conductive and mechanically stable Li3N and LiNxOy, enhancing Li-ion diffusion through the passivation layer. Notably, Zn-protected cells demonstrate electrochemically stable Li||Li cycling for 750+ cycles (2.0 mA cm-2) and 140 cycles (10.0 mA cm-2). Moreover, Zn-protected Li||Lithium Iron Phosphate full-cells achieve 134 mAh g-1 (89.2% capacity retention) after 400 cycles (C/2). This work investigates a promising solution to stabilize lithium metal plating/stripping for fast-charging lithium metal batteries.

Recycled micro-sized silicon anode for high-voltage lithium-ion batteries

Recycled micro-sized silicon anode for high-voltage lithium-ion batteries

Ultrahigh rate and cycling properties of Li2CuTi3O8 anode derived from HKUST-1 copper source for high-performance lithium-ion batteries

Rational design and preparation of titanium-based anode materials with superior fast charge and discharge are a key focuses of the lithium-ion batteries research. Herein, a novel and facile synthesis of uniformly carbon-coated Li2CuTi3O8 (LCuTO) nanoparticles with excellent high-rate lithium storage properties is presented using HKUST-1 with pore structure and active metal sites as a copper source. The well-designed LCuTO@HKUST with carbon bridges between the particles and the carbon layer on the outer surface offers high electronic conductivity for fast charge and discharge. The LCuTO@HKUST exhibits extraordinary lithium storage performance: high capacity (251.8 mAh/g after 1000 cycles at a current density of 1.0 A/g), a superior high-rate capability (160.3 mAh/g after 500 cycles at 3.0 A/g and 138.1 mAh/g after 500 cycles at 5.0 A/g), and excellent cycle reversibility and cycle stability under various current densities. In addition, the lower Li+ migration barrier in LCuTO@HKUST demonstrated by density functional theory (DFT) calculations is beneficial to the long-cycle stability and high-rate performance. The proposed preparation method and the strategy of using the MOF as a metal source for lithium-ion battery anode materials provide a new approach for advanced fast charge–discharge energy storage applications.

Promising AlN-modified VS2 heterostructure for Li-ion battery anode with high specific capacity

Degradation of the interior structure and the formation of uncontrolled Li dendrites at the negative electrode during the process of detaching and embedding Li atoms in lithium-ion batteries (LIBs) can negatively impact the cycling operation of the battery. To address these shortcomings, we constructed AlN/VS2 heterostructure with the expectation that it can be deployed as anodes in LIBs. Our results show that the AlN/VS2 heterostructure is characterized by strong stability, enhanced electrical conductivity and mechanical properties compared to monolayer AlN and VS2. Small Li clusters and cross-layer adsorption models are not thermodynamically prone to form, implying that the anode material plays a positive role in inhibiting the formation of dendrites. Moreover, the specific capacity of the AlN/VS2 heterostructure is 816.2 mAh/g, which is higher than that of monolayer VS2 (466 mAh/g) and graphene (372 mAh/g). The results of ab-initio molecular dynamics (AIMD) and biaxial stretching further demonstrate the structural and electrochemical stability of the electrode material during the embedding of Li atoms. To sum up, the AlN/VS2 heterostructure show potential as a high-performance anode for utilization in LIBs.

Theoretical prediction on Irida-graphene monolayer as promising anode material for lithium-ion batteries

With the growing interest in energy storage technologies, the demand for alternative rechargeable batteries has become increasingly urgent. We evaluate the feasibility of a two-dimensional (2D) material, Irida-graphene (IG) monolayer, as an anode for lithium-ion batteries (LIBs) through first-principles calculations. IG monolayer, after Li adsorption, exhibits metallic property, suggesting the good electrical conductivity. Additionally, in comparison with IG bilayer, IG monolayer possesses low diffusion barriers (0.19–0.24 eV), high theoretical capacity (1115.8mA h/g), and low average open circuit voltage (0.317 V). Furthermore, under the influence of solvent effects, the adsorption performance becomes even more stable, and the theoretical capacity increases. These intriguing findings make IG monolayer great potentials for the anode of LIBs.

Lithiation Depth Regulation of Silicon Anodes toward Excellent Stability.

Silicon (Si) is an appealing choice of anode for next-generation lithium ion batteries with high energy density, but its dramatic volume expansion makes it a tremendous challenge to achieve acceptable stability. Herein, we demonstrate that no capacity decay is observed during the testing period when the lithiation depth of Si nanoparticles is regulated at 2000 mAh g-1 or below, the fracture of Si anode films is well mitigated under suitable regulation of lithiation depth, and the cycled Si remains particulate without turning flocculent as under full lithiation. In addition, the solid electrolyte interphase (SEI) with a LiF-dominated outer region produced under lithiation regulation could better passivate the Si anodes and prevent further electrolyte decomposition than the mosaic-type SEI formed under full lithiation. Regulating lithiation depth proved to be a feasible solution to the pressing volume issues, and optimization of capacity utilization should be considered as much as materials-level optimization.

PVA-assisted spray deposited porous Li4Ti5O12 thin film as high-rate and long-cycle anode for lithium-ion thin-film batteries

Spinel Li4Ti5O12 (LTO), a zero-strain material, is a promising anode material for solid-state thin-film lithium-ion batteries (TFB). However, the preparation of high-performance Li4Ti5O12 thin-film electrodes through facile methods remains a significant challenge. Herein, we present a novel approach to prepare a binder- and conductor-free porous Li4Ti5O12 (P-LTO) thin-film. This approach polyvinyl alcohol (PVA)-assisted spray deposition and does not require the use of complex or expensive methods. Adding PVA to the precursor solution effectively prevents thin-film cracking during high-temperature annealing, enhances adhesion, and forms a highly interconnected porous structure. This unique structure shortens the lithium-ion diffusion pathways and facilitates electron transport. Therefore, P-LTO thin film electrodes demonstrate exceptional rate capacity of 104.1 mAh/g at a current density of 100C. In addition, the electrodes exhibit ultra-long cycle stability, retaining 80.9 % capacity after 10,000 cycles at 10C. This work offers a novel approach for the preparation of high-performance thin-film electrodes for TFBs.

Metal alkoxides: A new type of reversible anode materials for stable and high-rate lithium-ion batteries

Metal-organic compounds have attracted significant attention for lithium-ion battery (LIB) anodes. However, their practical application is severely hindered by the poor structural stability and sluggish Li+ reaction kinetics. Herein, we proposed a new type of metal–organic compound, metal alkoxides, for high-performance LIBs. A series of metal-alkoxide/graphene composites with different transition metal centers and alkoxide anions are prepared to investigate the structural stability, Li-storage ability, and Li+ diffusion kinetics. The results reveal that the metal centers and alkoxide anions have significant influence on the structural stability, molar mass, and electronic structures, which are highly related to the Li-storage performance. Among them, Co-EG/rGO (EG represents the ethylene glycol anion) delivers the best performance involving high specific capacity (975 mAh g−1 at 0.2 A g−1), excellent rate capability (400.8 mAh g−1 at 10 A g−1), and stable cycling performance (86.8 % capacity retention after 600 cycles) due to its stable structure, smaller molar mass, and favorable electronic structure. Moreover, the Li-storage mechanism and solid electrolyte interphase (SEI) evolution of the Co-EG/rGO electrode are studied in detail through multiple ex-situ/in-situ characterizations. This work provides a new type of metal alkoxide anode material for high-rate and long-life LIBs toward practical energy applications.