Shape Anisotropy Research Articles

Shape Anisotropy of Grains Formed by Laser Melting of (CoCuFeZr)17Sm2

For permanent magnetic materials, anisotropic microstructures are crucial for maximizing remanence Jr and maximum energy product (BH)max. This also applies to additive manufacturing processes such as laser powder bed fusion (PBF-LB). In PBF-LB processing, the solidification behavior is determined by the crystal structure of the material, the substrate, and the melt-pool morphology, resulting from the laser power PL and scanning speed vs. To study the impact of these parameters on the textured growth of grains in the melt-pool, experiments were conducted using single laser tracks on (CoCuFeZr)17Sm2 sintered magnets. A method was developed to quantify this grain shape anisotropy from electron backscatter diffraction (EBSD) analysis. For all grains in the melt-pool, the grain shape aspect ratio (GSAR) is calculated to distinguish columnar (GSAR < 0.5) and equiaxed (GSAR > 0.5) grains. For columnar grains, the grain shape orientation (GSO) is determined. The GSO represents the preferred growth direction of each grain. This method can also be used to reconstruct the temperature gradients present during solidification in the melt-pool. A dependence of the melt-pool aspect ratio (depth/width) on energy input was observed, where increasing energy input (increasing PL, decreasing vs) led to higher aspect ratios. For aspect ratios around 0.3, an optimum for directional columnar growth (93% area fraction) with predominantly vertical growth direction (mean angular deviation of 23.1° from vertical) was observed. The resulting crystallographic orientation is beyond the scope of this publication and will be investigated in future work.

Refining Alnico 8 magnets with composition optimization of matrix phase, directional solidification and magnetic field annealing

Optimized shape anisotropy of the Fe-Co rich ferromagnetic (α1) phase and the effective separation of the α1 and α2 phases with maximum magnetization difference—where α2 represents a paramagnetic magnetic phase—are the key parameters for maximizing the magnetic properties of Alnico magnets. In this manuscript, efforts have been undertaken to optimize the shape anisotropy of the α1 phase and increase the difference in magnetization and separation between α1 and α2 phases by fine tuning Al and Ni contents, directional solidification and magnetic field annealing methods. At first, Alnico magnets were fabricated by adjusting the content of α2 phase followed by homogenization, magnetic field annealing at high temperature, and low-temperature tempering. Intrinsic coercivity (Hcj) of ⁓146.0 kA/m, remanence (Br) of ⁓0.90 T and maximum energy density ((BH)max) of 46.02 kJ/m3 are achieved in the magnet with 8.2 wt% Al and 12.8 wt% Ni treated in field of 1.5 T for 10 minutes. At the second stage, the magnet with optimal magnetic properties is directionally solidified to develop columnar grains, and then the α1 phase is grown in the direction of the columnar grains by magnetic field annealing to enhance the (BH)max to 79.8 kJ/m3. The axial ratio of the α1 phase increased significantly with the increase of the grain size, particularly in the directionally solidified magnets. The Curie temperature of the α1 phase is noted near 1150 K, while the Curie temperature of the α2 phase is below 400 K. The magnets demonstrated excellent temperature stability, with magnetic properties decreasing by only 10–12 % at 800 K. These results may pave the way for further development of Alnico magnets specifically for high temperature applications.

Soil pore dynamics and infiltration characteristics as affected by cultivation duration for Mollisol in northeast China

Elucidating the effects of long-term cultivation on pore structure and infiltration characteristics is essential for understanding soil degradation mechanism and improving cropland sustainability. In this study, we evaluated a number of indicators regarding soil properties, pore structure, and water infiltration during long-term cultivation and the relationship of basic properties and pore structure with soil infiltration in northeast Mollisol region of China. The studied cropland involved four cultivation durations (20, 40, 60, and 100 years) and one forest (FR) as the control. X-ray computed tomography (CT) and mini disk infiltrometer were applied to assess the effects of long-term cultivation on soil pore structure and infiltration characteristics at soil depths of 0–100 cm. The pore properties including soil porosity (TP), pore number (PN), pore size distribution, mean shape factor (MSF), fractal dimension (FA), anisotropy (DA), and Euler number (EN), and infiltration properties including mean (IR), initial (IIR), stable infiltration rate (SIR), and saturated hydraulic conductivity (Ks) were planned to be measured in this study. The results showed that soil organic carbon (SOC) in cropland was significantly lower than that in FR, while bulk density (BD) and mean weight diameter (MWD) exhibited an opposite trend. Long-term cultivation altered the soil pore size and shape distribution, and decreased the macroporosity (>500 μm) and elongated porosity, which suggested that long-term cultivation results in a simpler pore network. FR took a longer time to reach a stable state in infiltration curve over time, while cropland had lower IR, IIR, SIR and Ks, indicating negative effects of cultivation on water infiltration. > 500 μm porosity and elongated porosity were positively correlated with infiltration characteristics (P<0.01). The infiltration parameters were mainly affected by soil pore properties (MSF, PN, and DA) and basic properties (SOC, MWD, and BD), highlighting the importance of pore morphology in the infiltration process. Our results provide new insights into the evolution of soil structure and properties and explanations for water infiltration dynamics under long-term cultivation from the microscale.

Meso-scale investigation on the permeability of frozen soils with the lattice Boltzmann method

Complex composition and intricate pore-scale structure of frozen soils poses significant challenges in reliably and efficiently obtaining their permeability. In this study, we propose a modified quartet structure generation set (QSGS) numerical tool for generating frozen soils and present the development of a computational simulation code based on the multiple-relaxation-time lattice Boltzmann method (LBM). In the modified QSGS, the arc-shaped water-ice interface is depicted, and the influence of pore-scale geometry on freezing temperature is considered. The validity of combining the proposed QSGS model and the LBM code is proved by comparing calculated results to analytical and experimental results of porous media. Our objective was to investigate the effects of soil features, including porosity, grain diameter, shape anisotropy of soil particles, and ice content on the intrinsic permeability of frozen soil. Additionally, we examined the relationship between these features and the specific surface area and tortuosity. Numerical results show that the intrinsic permeability of frozen soils increases with increasing porosity, larger granular diameter, and anisotropy, which is identical with the pressure gradient. The presence of ice led to clogging flow pathways and drastically decreased the intrinsic permeability, which is significantly less than unfrozen soil with same effective porosity. This study provides a useful tool to investigate the intricate interplay between the pore-scale structure and the intrinsic permeability of frozen soils.

Anisotropy of the magnetocaloric effect in MnAs single crystal

The magnetic and magnetocaloric properties of a MnAs single crystal have been studied along different crystallographic directions in the temperature range of the first-order magnetic phase transition. The constants of magnetocrystalline anisotropy, K1 and K2, were determined below the transition temperature by the Sucksmith-Thompson method. It was found that the energy of magnetocrystalline anisotropy decreases with increasing temperature. The results highlighted the impact of shape anisotropy and the magnetic prehistory of the sample on the maximum value of −ΔSm. The anisotropy of the −ΔSm value was observed for different crystallographic directions; the −ΔSm value reaches its maximum of 35 J∙kg−1∙K−1 in the [001] direction, while 29 J∙kg−1∙K−1 in the [110] direction. The probability of overestimating the ΔSm(T) values when using Maxwell’s equation instead of the Clausius-Clapeyron formula is shown.

Polyethylene glycol-assisted hydro-solvothermal growth of anisotropic magnetic iron oxides: The role of mixed environment conditions

In this study, an alternative mixed hydro-solvothermal route has been investigated for the synthesis of magnetic iron oxide nanoparticles with anisotropic shape. The synthesis was performed at mild conditions (150 °C) in a water/2-propanol environment, using poly(ethylene glycol) (PEG400) as structure directing agent, sodium thiosulfate as reducing agent, and NaOH as precipitating agent. The resulting systems were characterized by combining morphological, structural, and magnetic techniques. Experimental results clearly demonstrate that magnetite/maghemite nanorods are preferentially obtained in water/PEG400 environment, whereas 2-propanol/PEG400 environment promotes the growth of magnetite/maghemite polyhedral systems. Interestingly, synthesis performed in a mixed hydro-solvothermal (i.e., water/2-propanol) environment favors the preferential growth of hematite phase.

The electric-field-induced birefringence of hexagonal Cu1.81S flakes influenced by hole carriers

In this work, regular hexagonal copper sulfide (Cu1.81S) flakes are fabricated in two sizes by controlling the dosage of octadecene (ODE). Significant electric-field-induced birefringence of their dispersions is observed, benefitting from the anisotropic shape and the mobility of the hole carriers. The sudden increase and the relative inversion of the electric-field-induced birefringence Δn for the two sizes can be explained by both the constraint of polarized carriers and an increasing electric field. The dominance of the hole carriers in the electric-field-induced birefringence of Cu1.81S flakes is proved by decoration with silver nanoparticles and the corresponding conductivity changes.

Liquid-Crystalline Photonic Sandwich: Electroresponsive Colloids of Clay Nanosheets Loading Photofunctional Dyes.

Colloidal clay nanosheets obtained by the delamination of layered crystals of smectite-type clay minerals in water form liquid crystals because of their shape anisotropy. Loading of organic dyes onto the liquid crystalline clay nanosheets will enable novel photonic materials, where photofunctions of the loaded dye are controlled by the liquid crystallinity of the clay nanosheets. However, adsorption of organic dyes onto the nanosheets renders the nanosheet surfaces hydrophobic, and consequently, colloidal stability of the nanosheets is lost. In this study, this drawback is overcome by sandwiching cationic stilbazolium dyes between a pair of synthetic fluorohectorite nanosheets. This is realized by the preparation of stilbazolium-clay second-stage intercalation compounds characterized by intercalation of dye cations into every other interlayer space of the hectorite clay, where nonintercalated interlayer spaces are occupied by Na+ ions. The second-stage intercalation compounds are obtained by partial ion exchange of mother clay mineral incorporating Na+ ions in all of the interlayer spaces and delaminated from the Na+-containing interlayer spaces to form clay nanosheets sandwiching the dye molecules. Aqueous colloids of the dye-sandwiching clay nanosheets form colloidal liquid crystals, and the dye-sandwiching liquid crystalline clay nanosheets respond to an applied AC electric field to be aligned parallel to the electric field. The assembled structure of the dye-sandwiching clay nanosheets under the electric field is characterized by aligned discrete clay platelets, which is somewhat different from that of a colloidal liquid crystal of clay nanosheets without dye loading characterized by macroscopic liquid crystalline domains up to submillimeters. The electric alignment of the clay nanosheets induces alteration of light absorption of the sandwiched stilbazolium molecules, which verifies a strategy of constructing stimuli-responsive photonic materials of clay-organic hybrids.

Mass insulation enhancement of cork stoppers through heat treatment: experimental measurements, modeling, and optimization

Natural cork stoppers, used as bottle sealers for high-end products such as ingredients and flavorings, belong to the highest class in terms of cork quality. Various studies have been carried out to examine the solute diffusion in cork using conventional methods. However, the investigations were limited to natural cork stoppers that had been boiled and cut in a single direction. In this study, the anisotropic cylindrical shape of cork samples was modeled, considering various cutting directions. Additionally, we subjected the stoppers to boiling then to an optimal THT cycle to improve the cork's mechanical qualities. The optimal thermal cycle is determined using TGA analysis. IR and SEM tests are employed to verify the enhancements in the cork. The apparent mass diffusion coefficient (Dapp) is determined by the calibration of the model with the experimental data acquired via the conductometric method. The coefficient values are optimized using the Bat algorithm with a relative error of 10–5. The Dapp was found to be better for the treated cork grown in the Jijel region than for the cork Medea, which is better than of Skikda cork. Regarding the impact of the cutting direction on the Jijel's cork, the results indicate that the mass insulation is higher when the treated stoppers are cut in the tangential-longitudinal direction (DJTLt=4,12.10-13m2s-1) compared to the tangential-radial direction (DJTRt=7,75.10-13m2s-1) and the longitudinal-radial direction (DJLRt=8,53.10-13m2s-1). The treatment, which serves as a solution for the cork industry, showed an improvement in mass insulation 13-fold greater than the natural cork.

Facile preparation and study of supramolecular architecture of an efficient nanocomposite LB film AHSM/SA based on azo-functionalized hockey stick-shaped mesogen at air-water and air-solid interface

Hockey stick-shaped mesogens are fascinating thermotropic liquid crystal systems owing to their exceptional supramolecular assembly properties and shape anisotropy compared to conventional rod-and bent-shaped mesogens. In this article, we present an investigation of the supramolecular organization of a new azo-functionalized hockey stick-shaped mesogen with stearic acid at the air-water interface and air-solid interfaces by applying the Langmuir-Blodgett film deposition method. The incorporation of stearic acid can change the molecular organization of azo-functionalized hockey stick-shaped mesogen at an aqueous interface through hydrophobic-hydrophobic interactions and form a supramolecular nanostructure at the solid interface. The interfacial nature of the Langmuir monolayer was studied by recording the isotherm (surface pressure area, π–A), which was further analyzed by using Brewster angle microscopy. The significant reduction in molecular area, increased surface pressure, and lower isotherm slope of the AHSM/SA composite mixture indicate the hybrid AHSM/SA monolayer's greater stability compared to pure AHSM. BAM images of the AHSM/SA composite signify nanostructure aggregates formed by the interaction of AHSM and SA molecules at the air-water interface. Field emission scanning electron microscopic analysis of composite films revealed the formation of supramolecular domains. The impact of changing the surface pressure and the number of depositions on the morphology of the composite film surface was monitored using field emission scanning electron microscopy. The supramolecular H-type aggregation of azo-functionalized hockey stick-shaped mesogen and stearic acid molecules in the composite LB film was characterized using UV–visible absorption and steady-state fluorescence spectroscopy. The adsorption of stearic acid onto azo-functionalized hockey stick-shaped mesogen via hydrophobic interactions was confirmed by Fourier transform infrared spectroscopy of the composite Langmuir Blodgett film. Further, Raman spectroscopy of the LB films of the AHSM/SA composites is distinct from the pristine film components due to the merging of signals at similar wave numbers for both SA and AHSM with a lack of typical packing pattern further supported by PXRD studies of the films.

Palmitic acid-mediated modulation of crystallization dynamics in amylose microparticle formation: From spherical to macaron and disc shapes

Here, we investigated the complexation of short chain amylose (SCAs) and palmitic acid (PA), serving as polymeric building blocks that alter the selectivity and directionality of particle growth. This alteration affects the shape anisotropy of the particles, broadening their applications due to the increased surface area. By modifying the concentration of PA, we were able to make spherical, macaron, and disc-shaped particles, demonstrating that PA acts as a structure-directing agent. We further illustrated the lateral and longitudinal stacking kinetics between PA-SCA inclusion complexes during self-assembly, leading to anisotropy. Transmission electron microscope (TEM) and scanning electron microscope (SEM) revealed the structural difference between the initial and final morphologies of palmitic acid-short chain amylose particles (PA-SCAPs) compared to those of short-chain amylose particle (SCAPs). The presence of PA-SCA inclusion complex in the anisotropic particles was confirmed using nuclear magnetic resonance (NMR) and powder x-ray diffraction (XRD) analysis.

Pore connectivity and anisotropy affect carbon mineralization via extracellular enzymes in > 2 mm aggregates under conservation tillage of Mollisols

Soil aggregates, which are the basic units of soil structure, play an important role in the carbon cycle of ecosystems. The pore characteristics of aggregates influence soil organic carbon sequestration. However, studies on SOC mechanisms in aggregates have been limited to Mollisols. This study was conducted as a long-term experiment established in 2004 with a corn-soybean rotation in Mollisols. There are three treatments, including rotary tillage without straw return (conventional tillage, CT), subsoiling without straw return (reduced tillage, RT), and no tillage with straw return (NT). The soil pore size distribution, shape parameters, extracellular enzymes activity, and carbon mineralization were measured. The results showed that 15-year no tillage and reduced tillage increased the total porosity and proportion of larger pores, but significantly decreased the proportion of smaller pores in situ soil columns. Conventional tillage exhibited the most complex pores because of the highest pore fractal dimension (2.75–2.90), anisotropy (0.366–0.516), and the lowest sphericity (5.1–28.7). As for the soil columns filled with > 2 mm aggregates, reduced tillage significantly increased the pore connectivity by 3.02–3.62 %, whereas no tillage had no effect. The structural equation modelling indicated that in soil columns filled with > 2 mm aggregates, pore shape parameters, particularly connectivity and anisotropy, positively influenced the activities of β-glucosidase and β-xylosidase directly, and positively affected soil carbon mineralization by influencing extracellular enzymes activity indirectly. The findings emphasize the importance of pore shape parameters effect on soil carbon sequestration, and will be helpful in comprehending the microscopic mechanisms of soil carbon sequestration in > 2 mm aggregates.

Well-Defined Homopolymer Nanoparticles with Uniaxial Molecular Orientation by Synchronized Polymerization and Self-Assembly.

Synthesizing anisotropic polymeric nanoparticles (NPs) with well-defined shapes, dimensions, and molecular orientations is a very challenging task. Herein, we report the synthesis of surprisingly highly uniform shape-anisotropic polymer NPs with uniaxial internal molecular orientation. Keys to our method are synchronized polymerization and self-assembly (SPSA), which can even be realized by regular dispersion polymerization. This is demonstrated using a monomer containing a rigid 4-nitroazobenzene (NAB) side group. The short nucleation period, the completion of microphase separation before molecular motion is frozen, and sufficient low particle/solvent interfacial tension are shown to be the origins of the highly uniform dimensions, single liquid crystal domains, and well-defined anisotropic shape of particles. The liquid crystallization ability of the polymers, control of molecular weight distribution, and the polymerization kinetics are identified as three key factors controlling the NP formation. The uniformity of these NPs facilitates their SA formation into colloidal crystals. The particles exhibit optically anisotropic properties depending on orientations and, in particular, show intriguing photoswitchable LC-glass (order-disorder) transition, which can be used for the detection of ultraviolet (UV) light and allows the fabrication of photoreversible colloidal films.

Scattering properties of protoplanetary dust analogs with microwave analogy: Rough compact grains

Context. Scattering simulations of perfect spheres are not sufficient to explain the observations of scattered light from protoplanetary and debris disks, especially when the dust sizes are on the same order of magnitude as the wavelength used to perform the observations. Moreover, examples of grains collected from the Solar System have proved that the morphology of interstellar dust is irregular. These pieces of evidence lead us to consider that the morphologies of the dust that participates in these circumstellar disks are more complex than those of spheres. Aims. We aim to measure and simulate the scattering properties of six rough compact grains to identify how their morphology affects their scattering properties. These grains are intended to be dust analogs of protoplanetary and debris disks. Their convexity ranges from 75% to 99%. Methods. Grains were 3D printed using stereolithography, and their shape and refractive index were controlled. These analogs were measured with our microwave-scattering experiment (microwave analogy) at wavelengths ranging from 16.7 mm to 100 mm, leading to size parameters from X = 1.07 to X = 7.73. In parallel, their scattering properties were simulated with our finite-element method (FEM), which contained the same geometric file as the 3D printed grains. Results. We retrieved five scattering properties of these grains, that is, the phase function, the degree of linear polarization (DLP), and three other Mueller matrix elements 〈Sij〉. Two types of studies were performed. First, a study of the scattering properties averaged over several orientations of grains at different wavelengths. Second, a study of the same scattering properties, for which a power-law size distribution effect was applied. Conclusions. The very good correspondence between the measured and simulated Mueller matrix elements demonstrated the accuracy of our measurement setup and the efficiency of our FEM simulations. For the first study, DLP proved to be a good indicator of the grain morphology in terms of convexity and shape anisotropy. For the second study, backscattering enhancements of the phase function were related to the grain convexity. The maximum DLP and its negative polarization branches as well as the 〈S22〉/〈S11〉 levels were related to the shape anisotropy of our grains.

Surface enhanced raman spectroscopy based sensitive and onsite detection of microplastics in water utilizing silver nanoparticles and nanodendrites.

Plastics, of the order of microns in size, being not visible to the naked eye, are one of the significant contributors to pollution in the environment. Thus, the detection of micron-sized plastics (microplastics (MPs)) is crucial because of its hazardous toxic effects on our surroundings. In this work, we have proposed a quick and on-site detection of MPs, such as, polyvinyl chloride (PVC), polyvinyl alcohol (PVA) and polystyrene (PS) at ultra trace level using surface-enhanced Raman spectroscopy (SERS). To detect and analyse the spectra, two different nanostructures, such as, spherical shaped Ag nanoparticles (NPs), and shape anisotropic Ag nano-dendrites (NDs) were utilised to acquire the SERS spectra. A comprehensive analysis was further performed to check and investigate the amount of enhancements due to the mentioned nanostructures. We observed the Ag NDs exhibited amplified signal intensity compared to the Ag NPs due to the shape anisotropy leading to the surface charge confinement effect to create highly dense hotspots. However, the spherical shaped polystyrene beads of micron size exhibited better enhancement in Raman signal intensity when mixed with Ag NPs due to increased surface adsorption with the NPs. Therefore, the comparative study emphasizes the ability of using solution-based nanostructure as SERS for the onsite detection of microplastics having diverge size range at low concentration.

Adjusting microwave sensing frequency through aspect ratio variation and bending repetitions in Permalloy ellipses

The Ferromagnetic Resonance (FMR) phenomenon, marked by the selective absorption of microwave radiation by magnetic materials in the presence of a magnetic field, plays a pivotal role in the development of radar absorbing materials, high speed magnetic storage, and magnetic sensors. This process is integral for technologies requiring precise control over microwave absorption frequencies. We explored how variations in resonance fields can be effectively modulated by adjusting both the shape and stress anisotropies of magnetic materials on a flexible substrate. Utilizing polyethylene-naphthalate (PEN) as the substrate and Permalloy (Ni79Fe21, noted for its positive magnetostriction coefficient) as the magnetic component, we demonstrated that modifications in the aspect ratio and bending repetitions can significantly alter the resonance field. The results, consistent with Kittel’s equation and the predictions of a uniaxial magnetic anisotropy model, underscore the potential for flexible substrates in enhancing the sensitivity and versatility of RF-based magnetic devices.

Interacting Trimagnetic Ensembles for Enhanced Magnetic Resonance Transverse Relaxivity.

An ensemble of nanosystems can be considered to improve magnetic resonance imaging (MRI) transverse relaxivity. Herein, an interacting superparamagnetic competing structure of an isotropic-anisotropic trimagnetic hybrid nanosystem, γ-Fe2O3@δ-MnO2@NiFe2O4, is considered for MRI relaxivity exploration. The interacting superparamagnetic system reveals fascinating dynamic magnetic behavior, where flower-shaped two-dimensional flakes are decorated over nanoparticles. The hybrid nanosystem exhibits modulated shape anisotropy with spin blocking and energy barrier broadening, which help in achieving faster MR transverse relaxivity. The hierarchical architecture ensemble of the trimagnetic landscape shows effective MR transverse relaxivity with a transverse (r2)/longitudinal (r1) relaxivity of 61.5 and potential cell viability. The competing trimagnetic system with regulated activation energy is found to be the underlying reason for such signal enhancement in MRI contrast efficiency. Hence, this study displays a novel pathway correlating MR transverse relaxivity with dynamic magnetic behavior and competing landscape of hierarchical trimagnetic ensembles.

Structural analysis, relaxor-ferroelectric behavior and optical properties of Mn3+-doped CaBi3NdTi4O15 synthesized via hydrothermal technique

In this study, the synthesis of the Aurivillius Ca1-xBi3+xNdTi4-xMnxO15 (CBNTMx), where x is 0, 0.2, and 0.4, was carried out using the hydrothermal technique. The X-ray diffraction (XRD) data showed that the polar orthorhombic structure in space group of A21am was adopted by all powder samples. All samples possessed anisotropic plate-like particle shapes, and the particle size increased with increase in x value. The phase transition temperature (Tm) is decreased by the ionic substitution owing to the decrease in orthorhombic distortion reflected by the reduction of orthorhombicity. Relaxor-ferroelectric behavior was observed for CBNTM0.4 because of its strong frequency dispersion, while CBNTM0 and CBNTM0.2 only showed a diffused-phase transition (DPT) indicated by the broad dielectric constant at the transition temperature (Tm). The electrical conductivity exhibited an enhancement at higher x value since the ionic substitution with acceptor Mn3+ ions introduced the charge carrier in the lattice. Similarly, the reduction of optical band gap energy from 3.43 eV for the parent CBNTM0 to 2.75 eV and 2.71 eV for CBNTM0.2 and CBNTM0.4, respectively, was described as the contribution of the lower energy level of Mn 3d orbital than that of Ti 3d in the conduction band and also the less distorted structure.

GaAs Cone-Shell Quantum Dots in a Lateral Electric Field: Exciton Stark-Shift, Lifetime, and Fine-Structure Splitting.

Strain-free GaAs cone-shell quantum dots have a unique shape, which allows a wide tunability of the charge-carrier probability densities by external electric and magnetic fields. Here, the influence of a lateral electric field on the optical emission is studied experimentally using simulations. The simulations predict that the electron and hole form a lateral dipole when subjected to a lateral electric field. To evaluate this prediction experimentally, we integrate the dots in a lateral gate geometry and measure the Stark-shift of the exciton energy, the exciton intensity, the radiative lifetime, and the fine-structure splitting (FSS) using single-dot photoluminescence spectroscopy. The respective gate voltage dependencies show nontrivial trends with three pronounced regimes. We assume that the respective dominant processes are charge-carrier deformation at a low gate voltage U, a vertical charge-carrier shift at medium U, and a lateral charge-carrier polarization at high U. The lateral polarization forms a dipole, which can either enhance or compensate the intrinsic FSS induced by the QD shape anisotropy, dependent on the in-plane orientation of the electric field. Furthermore, the data show that the biexciton peak can be suppressed by a lateral gate voltage, and we assume the presence of an additional vertical electric field induced by surface charges.

Designing highly efficient interlocking interactions in anisotropic active particles

Cluster formation of microscopic swimmers is key to the formation of biofilms and colonies, efficient motion and nutrient uptake, but, in the absence of other interactions, requires high swimmer concentrations to occur. Here we experimentally and numerically show that cluster formation can be dramatically enhanced by an anisotropic swimmer shape. We analyze a class of model microswimmers with a shape that can be continuously tuned from spherical to bent and straight rods. In all cases, clustering can be described by Michaelis-Menten kinetics governed by a single scaling parameter that depends on particle density and shape only. We rationalize these shape-dependent dynamics from the interplay between interlocking probability and cluster stability. The bent rod shape promotes assembly in an interlocking fashion even at vanishingly low particle densities and we identify the most efficient shape to be a semicircle. Our work provides key insights into how shape can be used to rationally design out-of-equilibrium self-organization, key to creating active functional materials and processes that require two-component assembly with high fidelity.