Anionic Sulfonate Groups Research Articles

Understanding the influence of sodium chloride concentration on ion diffusion in charged polymers

Previous observations made on sulfonated polysulfones equilibrated with solutions of increasing salinity, where salt diffusion coefficients increase concurrently with reductions in water content driven by osmotic de-swelling, are currently unexplained. To further explain the molecular underpinnings of these observations, we characterized the influence of external salt solution concentration on the average salt and ion diffusion properties of two sulfonated polymers: a model cross-linked material (XLAMPS) and a series of sulfonated polysulfones (HQ:BP – XX). Analysis of the average salt and co- and counter-ion diffusion coefficients in these polymers suggest that the increase in charge screening (of electrostatic interactions between anionic sulfonate groups and co-ions) that occurs with increasing salinity affects the salt diffusion coefficients of sulfonated polysulfone in a manner that is different from what would be expected based on changes in water content alone and from what was observed for XLAMPS. Free volume theory describes the influence of these electrostatic effects on salt diffusion using a parameter related to the characteristic free volume element size necessary for diffusion. The results and analysis suggest that charge screening reduces the characteristic free volume element size necessary for diffusion in sulfonated polysulfone, which provides an explanation for the observed increase in average salt diffusion coefficients with increased salinity.

Achieving High-Performance Lithium-Sulfur Batteries by Modulating Li+ Desolvation Barrier with Liquid Crystal Polymers.

Lithium-sulfur (Li-S) batteries offer high theoretical capacity but are hindered by poor rate capability and cycling stability due to sluggish Li2S precipitation kinetics. Here a sulfonate-group-rich liquid crystal polymer (poly-2,2'-disulfonyl-4,4'-benzidine terephthalamide, PBDT) is designed and fabricated to accelerate Li2S precipitation by promoting the desolvation of Li+ from electrolyte. PBDT-modified separators are employed to assemble Li-S batteries, which deliver a remarkable rate capacity (761 mAh g-1 at 4 C) and cycling stability (500 cycles with an average decay rate of 0.088% per cycle at 0.5 C). A PBDT-based pouch cell even delivers an exceptional capacity of ≈1400 mAh g-1 and an areal capacity of ≈11 mAh cm-2 under lean-electrolyte and high-sulfur-loading condition, demonstrating promise for practical applications. Results of Raman spectra, molecular dynamic (MD) and density functional theory (DFT) calculations reveal that the abundant anionic sulfonate groups of PBDT aid in Li+ desolvation by attenuating Li+-solvent interactions and lowering the desolvation energy barrier. Plus, the polysulfide adsorption/catalysis is also excluded via electrostatic repulsion. This work elucidates the critical impact of Li+ desolvation on Li-S batteries and provides a new design direction for advanced Li-S batteries.

A synergistic polyelectrolytes-Zr-MOF hydrated construction graphene oxide nanofiltration with enhanced dye wastewater remediation

In recent years, developing an efficient nanofiltration membrane had been a thorny challenge for dye/salt wastewater purification. In this study, a novel graphene oxide-based nanofiltration membrane (GO/UiO@S-GO-8) was constructed by intercalating the synergistic polyelectrolytes-Zr-MOF hydrated construction (UiO@S-GO) into GO nanosheets. Here, combining the hydrophilic high-density anionic sulfonic groups (SO3-) with cationic amino groups (-NH2), GO-based nanofiltration membrane demonstrated outstanding separation ability, anti-pollution performance and structure stability. Compared to pure GO membrane, benefiting by effective expansion of graphene layer spacing from intercalation effect of UiO@S-GO, the water permeance of GO/UiO@S-GO-8 membrane increased to 8 times (about 66.3 ± 1.5 L m−2 h−1 bar−1). Importantly, the permeances of various dyes wastewater also reached up to 65.1 ± 1.8 L m−2 h−1 bar−1 at the high removal rate (exceeding 99.4%). Furthermore, strong hydratability of polyelectrolytes and hard porous crystal constructed the robust anti-fouling micro/nano rough structures onto the membrane surface, which made flux recovery rate (FRR) of GO/UiO@S-GO-8 enhanced to 96.7 ± 1.3%. Remarkably, the salt-resistant behavior of the polyelectrolytes and porous MOF could maintain the stability of the membrane filtration channels, the GO/UiO@S-GO-8 membrane could realize efficient removal rate of dyes (over 98%) faced the complex dye wastewater with different salt concentrations. Meanwhile, the GO/UiO@S-GO-8 membrane also could maintain the high permeance (46.7 ± 1.5 L m−2 h−1 bar−1) as well as excellent removal rate (97.2 ± 1.4%) after 10 cycle experiments. Hence, the GO/UiO@S-GO-8 nanofiltration membrane with Polyelectrolytes-Zr-MOF hydrated construction possessed a broad application inspiration in the purification of high-salt/dye wastewater.

Enhanced Adsorption of Methylene Blue Dye on Functionalized Multi-Walled Carbon Nanotubes.

Carbon nanomaterials are promising adsorbents for dye removal from wastewater also due to their possible surface functionalization that, in principle, can increase the adsorption rate and provide regeneration. To investigate the real advantages of functionalization, we synthesized and characterized through IR, TGA, TEM, XPS and DLS measurements a multi-walled carbon nanotube (MWCNT) derivative bearing benzenesulfonate groups (MWCNT-S). The obtained material demonstrated to have good dispersibility in water and better capability to adsorb methylene blue (MB) compared to the pristine MWCNT adsorbent. Adsorption kinetic studies showed a very fast process, with a constant significantly higher with respect not only to that of the unfunctionalized MWCNT adsorbent but also to those of widely used activated carbons. Moreover, the adsorption capacity of MWCNT-S is more than doubled with respect to that of the insoluble pristine MWCNT adsorbent, thanks to the dispersibility of the derivatives, providing a larger available surface, and to the possible electrostatic interactions between the cationic MB and the anionic sulfonate groups. Additionally, the reversibility of ionic interactions disclosed the possibility to release the adsorbed cationic pollutant through competition with salts, not only regenerating the adsorbent, but also recovering the dye. Indeed, by treating the adsorbed material for 1 h with 1 M NaCl, a regeneration capacity of 75% was obtained, demonstrating the validity of this strategy.

Ionic Strength-Dependent Structure of Complex Coacervate Core Micelles.

Salt concentration-dependent structure of complex coacervate core micelles (C3Ms), formed by polyether-based block copolyelectrolytes containing cationic ammonium (A) or anionic sulfonate (S) groups in aqueous media, is investigated by light scattering and small-angle X-ray/neutron scattering (SAX/NS). As the salt concentration increases, both a core radius (Rcore) and an aggregation number (Nagg) significantly decrease, but a corona thickness (Lcorona) is nearly unchanged. Larger salt concentrations can lower the interfacial tension between the coacervate cores and aqueous media, resulting in an increased interfacial area per chain and a more relaxed conformation of the core blocks. Based on the structure characterization, the scaling relationship between structure parameters (i.e., Rcore, Nagg, and Lcorona) and salt concentration is obtained and compared to the theoretical description estimated by the free energy balance between the entropic penalty of core stretching and the interfacial energy. We propose that the free energy contribution of the core block stretching is not negligible in C3Ms because of the highly swollen cores caused by water.

Formation of Polyion Complex Aggregate Formed from a Cationic Block Copolymer and Anionic Polysaccharide.

Block copolymers (PmMn; P20M101 and P100M98) comprising poly(2-(methacryloyloxy)ethylphosphorylcholine) (PMPC, P) containing biocompatible phosphorylcholin pendants and cationic poly((3-acryloylaminopropyl) trimethylammonium chloride) (PMAPTAC, M) were synthesized via a controlled radical polymerization method. The degrees of polymerization of the PMPC and PMAPTAC segments are denoted by subscripts (PmMn). The mixture of cationic PmMn and anionic sodium chondroitin sulfate C (CS) with the pendant anionic carboxylate and sulfonate groups formed polyion complex (PIC) aggregates in phosphate-buffered saline. A charge-neutralized mixture of P20M101 with CS formed P20M101/CS PIC vesicles with a hydrodynamic radius (Rh) of 97.2 nm, zeta potential of ca. 0 mV, and aggregation number (Nagg) of 23,044. PMPC shells covered the surface of the PIC vesicles. The mixture of P100M98 and CS formed PIC spherical micelles with the PIC core and hydrophilic PMPC shells. The Rh, zeta potential, and Nagg of the PIC micelles were 26.4 nm, ca. 0 mV, and 404, respectively. At pH < 4, the carboxylate anions in CS were protonated. Thus, the charge balance in the PIC micelles shifted to decrease the core density owing to the electrostatic repulsions of the excess cations in the core. The PIC micelles dissociated at a NaCl concentration ≥0.6 M owing to the charge screening effect. The positively charged PIC micelles with excess P100M98 can encapsulate anionic dyes owing to electrostatic interaction.

Highly lubricious SPMK-g-PEEK implant surfaces to facilitate rehydration of articular cartilage

To enable long lasting osteochondral defect repairs which preserve the native function of synovial joint counter-face, it is essential to develop surfaces which are optimised to support healthy cartilage function by providing a hydrated, low friction and compliant sliding interface. PEEK surfaces were modified using a biocompatible 3-sulfopropyl methacrylate potassium salt (SPMK) through UV photo-polymerisation, resulting in a ∼350 nm thick hydrophilic coating rich in hydrophilic anionic sulfonic acid groups. Characterisation was done through Fourier Transformed Infrared Spectroscopy, Focused Ion Beam Scanning Electron Microscopy, and Water Contact Angle measurements.Using a Bruker UMT TriboLab, bovine cartilage sliding tests were conducted with real-time strain and shear force measurements, comparing untreated PEEK, SPMK functionalised PEEK (SPMK-g-PEEK), and Cobalt Chrome Molybdenum alloy. Tribological tests over 2.5 h at physiological loads (0.75 MPa) revealed that SPMK-g-PEEK maintains low friction (μ< 0.024) and minimises equilibrium strain, significantly reducing forces on the cartilage interface. Post-test analysis showed no notable damage to the cartilage interfacing against the SPMK functionalised surfaces.The application of a constitutive biphasic cartilage model to the experimental strain data reveals that SPMK surfaces increase the interfacial permeability of cartilage in sliding, facilitating fluid and strain recovery. Unlike previous demonstrations of sliding-induced tribological rehydration requiring specific hydrodynamic conditions, the SPMK-g-PEEK introduces a novel mode of tribological rehydration operating at low speeds and in a stationary contact area. SPMK-g-PEEK surfaces provide an enhanced cartilage counter-surface, which provides a highly hydrated and lubricious boundary layer along with supporting biphasic lubrication.Soft polymer surface functionalisation of orthopaedic implant surfaces are a promising approach for minimally invasive synovial joint repair with an enhanced bioinspired polyelectrolyte interface for sliding against cartilage. These hydrophilic surface coatings offer an enabling technology for the next generation of focal cartilage repair and hemiarthroplasty implant surfaces.

Preparation of Water-Soluble Polyion Complex (PIC) Micelles with Random Copolymers Containing Pendant Quaternary Ammonium and Sulfonate Groups.

Cationic random copolymers (PCm) consisting of 2-(methacryloyloxy)ethyl phosphorylcholine (MPC; P) with methacroylcholine chloride (MCC; C) and anionic random copolymers (PSn) consisting of MPC and potassium 3-(methacryloyloxy)propanesulfonate (MPS; S) were prepared via a reversible addition-fragmentation chain transfer method. "m" and "n" represent the compositions (mol %) of the MCC and MPS units in the copolymers, respectively. The degrees of polymerization for the copolymers were 93-99. Water-soluble MPC unit contains a pendant zwitterionic phosphorylcholine group whose charges are neutralized in pendant groups. MCC and MPS units contain the cationic quaternary ammonium and anionic sulfonate groups, respectively. The stoichiometrically charge-neutralized mixture of a matched pair of PCm and PSn aqueous solutions resulted in the spontaneous formation of water-soluble PCm/PSn polyion complex (PIC) micelles. These PIC micelles have the MPC-rich surface and MCC/MPS core. These PIC micelles were characterized using 1H NMR, dynamic and static light scattering, and transmission electron microscopic measurements. The hydrodynamic radius of these PIC micelles depends on the mixing ratio of the oppositely charged random copolymers. The charge-neutralized mixture formed maximum-size PIC micelles.

Incorporating ionic carbon dots in polyamide nanofiltration membranes for high perm-selectivity and antifouling performance

Recent advances in nanotechnology have brought great opportunities to the developing next-generation nanofiltration membranes for addressing the concern of global water scarcity and energy crisis. Carbon dots have been deemed as a promising nanomaterial for enhancing the nanofiltration performance of polymeric membranes. Herein, carbon dots with cationic amine groups (PEI-CDs) and those with anionic sulfonate groups (PS-CDs) are incorporated into the polyamide selective layer of thin-film nanocomposite (TFN) membranes to create charged nanovoids (free volume) between the carbon dots and the surrounding polyamide network for high-efficiency nanofiltration. The positively charged amine group-based and negatively charged sulfonate group-based nanovoids in the resultant TFN-PEI-CDs and TFN-PS-CDs membranes, respectively, provide alternative pathways for efficient water permeation while effectively rejecting divalent ions via the Donnan and dielectric exclusion effects, thereby overcoming the recurring trade-off between permeability and selectivity encountered by dense polymeric membranes. In particular, the creation of negatively charged nanovoids enables the TFN-PS-CDs membrane to achieve one of the best performances among the recently reported nanofiltration membranes, by showing a nearly tripled pure water permeability of 30.9 L m−2 h−1 bar−1 as well as a higher Na2SO4 rejection rate of 99.4% than the membrane with a pristine polyamide selective layer. Moreover, the TFN membranes demonstrate greater resistance to foulants with charges of the same sign as the nanovoids. This work provides insights into the design of nanovoids with desired properties in other polymeric membranes for high-efficiency filtration processes.

Ion-Specific Antipolyelectrolyte Effect on the Swelling Behavior of Polyzwitterionic Layers

In this study, we systematically investigate the interactions between mobile ions generated from added salts and immobile charges within a sulfobetaine-based polyzwitterionic film in the presence of five salts (KCl, KBr, KSCN, LiCl, and CsCl). The sulfobetaine groups contain quaternary alkylammonium and sulfonate groups, giving the positive and negative charges. The swelling of the zwitterionic film in the presence of different salts is compared with the swelling behavior of a polycationic or polyanionic film containing the same charged groups. For such a comparative study, we design cross-linked terpolymer films with similar thicknesses, cross-link densities, and charge fractions, but with varying charged moieties. While the addition of salt in general leads to a collapse of both cationic and anionic films, the presence of specific types of mobile anions (Cl-, Br-, and SCN-) considerably influences the swelling behavior of polycationic films. We attribute this observation to a different degree of ion-pair formations between the different types of anionic counterions and the immobile cationic quaternary alkylammonium groups in the films where highly polarizable counterions such as SCN- lead to a high degree of ion pairing and less polarizable counterions, such as Cl-, cause a low degree of ion pairing. Conversely, we do not observe any substantial effect of varying the type of cationic counterions (K+, Li+, and Cs+), which we assign to the lack of ion pairing between the weakly polarizable cations and the immobile anionic sulfonate groups in the films. In addition, we observe that the zwitterionic films swell with increasing ionic strength and the degree of swelling is anion dependent, which is in agreement with previous reports on the "antipolyelectrolyte effect". Herein, we explain this ion-specific swelling behavior with the different cation and anion abilities to form ion pairs with quaternary alkylammonium and sulfonate in the sulfobetaine groups.

Effects of surfactant adsorption on the wettability and friction of biomimetic surfaces.

The properties of solid-liquid interfaces can be markedly altered by surfactant adsorption. Here, we use molecular dynamics (MD) simulations to study the adsorption of ionic surfactants at the interface between water and heterogeneous solid surfaces with randomly arranged hydrophilic and hydrophobic regions, which mimic the surface properties of human hair. We use the coarse-grained MARTINI model to describe both the hair surfaces and surfactant solutions. We consider negatively-charged virgin and bleached hair surface models with different grafting densities of neutral octadecyl and anionic sulfonate groups. The adsorption of cationic cetrimonium bromide (CTAB) and anionic sodium dodecyl sulfate (SDS) surfactants from water are studied above the critical micelle concentration. The simulated adsorption isotherms suggest that cationic surfactants adsorb to the surfaces via a two-stage process, initially forming monolayers and then bilayers at high concentrations, which is consistent with previous experiments. Anionic surfactants weakly adsorb via hydrophobic interactions, forming only monolayers on both virgin and medium bleached hair surfaces. We also conduct non-equilibrium molecular dynamics simulations, which show that applying cationic surfactant solutions to bleached hair successfully restores the low friction seen with virgin hair. Friction is controlled by the combined surface coverage of the grafted lipids and the adsorbed CTAB molecules. Treated surfaces containing monolayers and bilayers both show similar friction, since the latter are easily removed by compression and shear. Further wetting MD simulations show that bleached hair treated with CTAB increases the hydrophobicity to similar levels seen for virgin hair. Treated surfaces containing CTAB monolayers with the tailgroups pointing predominantly away from the surface are more hydrophobic than bilayers due to the electrostatic interactions between water molecules and the exposed cationic headgroups.

Diffusion of hydrophilic to hydrophobic forms of Nile red in aqueous C12EO10 gels by variable area fluorescence correlation spectroscopy.

Solute diffusion within lyotropic liquid crystal gels prepared from a series of water and decaethylene glycol monododecyl ether (C12EO10) mixtures was explored by variable area fluorescence correlation spectroscopy. Aqueous C12EO10 gels were prepared in concentrations ranging from 55 : 45 to 70 : 30 wt% of surfactant and water. Small angle X-ray scattering revealed that these gels comprise hexagonal mesophases of cylindrical micelles. Micelle spacing was found to decrease with increasing C12EO10 concentration. Three different Nile red (NR) dyes were employed as model solutes and were separately doped into the gels at nanomolar levels. These include a hydrophilic form of NR incorporating an anionic sulfonate group (NRSO3-), a hydrophobic form incorporating a fourteen-carbon alkane tail (NRC14), and commercial NR as an intermediate case. FCS data acquired from the gels revealed that NRSO3- diffused primarily in 3D. Its diffusion coefficient exhibited a monotonic decrease with increasing gel concentration and micelle packing density, consistent with confinement of its motions by its exclusion from the micelle cores. NRC14 exhibited the smallest diffusion coefficient, most likely due to its larger size and enhanced interactions with the micelle cores. NR yielded an intermediate diffusion coefficient and the most anomalous behavior of the three dyes, attributable to its facile partitioning between core and corona regions, and greater participation by 1D diffusion. The results of these studies afford an improved understanding of molecular mass transport through soft-matter nanomaterials like those being developed for use in drug delivery and membrane based chemical separations.

Functionalized Nanocomposite Gel Polymer Electrolyte with Strong Alkaline-Tolerance and High Zinc Anode Stability for Ultralong-Life Flexible Zinc-Air Batteries.

Increasing pursuit of next-generation wearable electronics has put forward the demand of reliable energy devices with high flexibility, durability, and enhanced electrochemical performances. Flexible aqueous zinc-air batteries (FAZABs) have attracted great interests owing to the high energy density, safety, and environmental benignity, for which quasi-solid-state gel polymer electrolytes (QSGPEs) are state-of-the-art electrolytes with high ionic conductivity, flexibility, and resistance to leakage problems of traditional liquid electrolytes. Compared to commonly used PVA-KOH electrolyte with poor electrolyte retention capability and cycling stability, a new type of sulfonate functionalized nanocomposite QSGPE is applied in FAZABs with high ionic conductivity, strong alkaline tolerance, and high zinc anode stability. Notably, the existence of (1) strong anionic sulfonate groups of QSGPEs, contributing to the exposure of preferred Zn (002) plane that is more resistant to zinc dendrite formation, and (2) nano-attapulgite electrolyte additives, beneficial for the enhancement of ionic conductivity, electrolyte uptake, and retention capability, endows a ultralong cycling life of 450h for the fabricated FAZAB. Furthermore, flexible energy belts and knittable energy wires fabricated with a series/parallel unit of several FAZABs can be used to power various wearable electronics.

QENS study on local segmental dynamics of polyelectrolytes in complex coacervates

The segmental dynamics of complex coacervates were investigated as a function of salt concentration and a charge type using quasi-elastic neutron scattering (QENS). The coacervates were prepared by mixing two oppositely charged polyether-based polyelectrolyte solutions functionalized for cationic ammonium and guanidinium groups or anionic sulfonate groups. For the QENS time scale, the intrinsic ion pairs were considered effective cross-links, and therefore the dynamics of chain segments between the intrinsic junctions were probed. We observed that as salt concentration increases, both the number of mobile chain segments and their segmental dynamics increase for ammonium-based coacervates where the electrostatic interaction primarily governs the phase behavior. However, the guanidinium-based coacervates show slow and nearly identical segmental relaxation independent of the salt concentration, which is potentially attributed to the non-electrostatic interactions. The combination of the chemical structure of ionic moieties, salt concentration, and temperature plays a significant role to determine polymer chain dynamics mainly affected by the strength of ionic bonding.

Graphene-Based Intrinsically Stretchable 2D-Contact Electrodes for Highly Efficient Organic Light-Emitting Diodes.

Intrinsically stretchable organic light-emitting diodes (ISOLEDs) are becoming essential components of wearable electronics. However, the efficiencies of ISOLEDs have been highly inferior compared with their rigid counterparts, which is due to the lack of ideal stretchable electrode materials that can overcome the poor charge injection at 1D metallic nanowire/organic interfaces. Herein, highly efficient ISOLEDs that use graphene-based 2D-contact stretchable electrodes (TCSEs) that incorporate a graphene layer on top of embedded metallic nanowires are demonstrated. The graphene layer modifies the work function, promotes charge spreading, and impedes inward diffusion of oxygen and moisture. The work function (WF) of 3.57eV is achieved by forming a strong interfacial dipole after deposition of a newly designed conjugated polyelectrolyte with crown ether and anionic sulfonate groups on TCSE; this is the lowest value ever reported among ISOLEDs, which overcomes the existing problem of very poor electron injection in ISOLEDs. Subsequent pressure-controlled lamination yields a highly efficient fluorescent ISOLED with an unprecedently high current efficiency of 20.3cd A-1 , which even exceeds that of an otherwise-identical rigid counterpart. Lastly, a 3 inch five-by-five passive matrix ISOLED is demonstrated using convex stretching. This work can provide a rational protocol for designing intrinsically stretchable high-efficiency optoelectronic devices with favorable interfacial electronic structures.

Functionalized resorcinarenes effectively disrupt the aggregation of αA66-80 crystallin peptide related to cataracts.

Cataracts, an eye lens clouding disease, are debilitating and while operable, remain without a cure. αA66-80 crystallin peptide abundant in cataracted eye lenses contributes to aggregation of αA-crystallin protein leading to cataracts. Inspired by the versatility of macrocycles and programmable guest selectivity through discrete functionalizations, we report on three water-soluble ionic resorcinarene receptors (A, B, and C) that disrupt the aggregation of αA66-80 crystallin peptide. A and B each possess four anionic sulfonate groups, while C includes four cationic ammonium groups with four flexible extended benzyl groups. Through multiple non-covalent attractions, these receptors successfully disrupt and reverse the aggregation of αA66-80 crystallin peptide, which was studied through spectroscopic, spectrometric, calorimetric, and imaging techniques. The αA66-80·receptor complexes were also explored using molecular dynamics simulation, and binding energies were calculated. Even though each of the three receptors can bind with the peptide, receptor C was characterized by the highest binding energy and affinity for three different domains of the peptide. In effect, the most efficient inhibitor was a cationic receptor C via extended aromatic interactions. These results highlight the potential of versatile and tunable functionalized resorcinarenes as potential therapeutics to reverse the aggregation of α-crystallin dominant in eye cataracts.

EfficientN-sulfopropylation of chitosan with 1,3-propane sultone in aqueous solutions: neutral pH as the key condition

Conjugation of strong anionic sulfonate groups to chitosan (CS) is typically used for converting the weak cationic CS to its polyampholyte derivatives, which are of interest to different areas benefiting from both cationic and anionic groups.

Modulating the Properties of Fe(III) Macrocyclic MRI Contrast Agents by Appending Sulfonate or Hydroxyl Groups.

Complexes of Fe(III) that contain a triazacyclononane (TACN) macrocycle, two pendant hydroxyl groups, and a third ancillary pendant show promise as MRI contrast agents. The ancillary group plays an important role in tuning the solution relaxivity of the Fe(III) complex and leads to large changes in MRI contrast enhancement in mice. Two new Fe(III) complexes, one with a third coordinating hydroxypropyl pendant, Fe(L2), and one with an anionic non-coordinating sulfonate group, Fe(L1)(OH2), are compared. Both complexes have a deprotonated hydroxyl group at neutral pH and electrode potentials representative of a stabilized trivalent iron center. The r1 relaxivity of the Fe(L1)(OH2) complex is double that of the saturated complex, Fe(L2), at 4.7 T, 37 °C in buffered solutions. However, variable-temperature 17O-NMR experiments show that the inner-sphere water of Fe(L1)(OH2) does not exchange rapidly with bulk water under these conditions. The pendant sulfonate group in Fe(L1)(OH2) confers high solubility to the complex in comparison to Fe(L2) or previously studied analogues with benzyl groups. Dynamic MRI studies of the two complexes showed major differences in their pharmacokinetics clearance rates compared to an analogue containing a benzyl ancillary group. Rapid blood clearance and poor binding to serum albumin identify Fe(L1)(OH2) for development as an extracellular fluid contrast agent.

Effects of zwitterionic molecules on ionic association in ethylene oxide-based electrolytes

This work investigates the effect of zwitterionic molecules on ionic association in ethylene oxide (EO)-based electrolytes using molecular dynamics simulations. Zwitterionic molecules can associate with cations and anions because they possess both positively and negatively charged groups. This unique feature can be leveraged to develop electrolytes with high ionic conductivity if we understand how zwitterionic molecules influence ionic associations. We investigate the ionic associations in the electrolytes composed of oligo(ethylene oxide) (EO) (EOx, x = 2, 3, 4, and 5), LiTFSI and zwitterionic molecules containing cationic imidazole group and anionic sulfonate group using molecular dynamics simulations. The analyzed properties include the radial distribution functions between Li+, [TFSI]-, EOx and zwitterionic molecules, the structures and dynamics of Li+-[TFSI]-, Li+- EOx and Li+-zwitterion associations, and the diffusion coefficients of Li+, [TFSI]-, EOx and zwitterionic molecules. The simulation results show two distinct effects of zwitterionic molecules on ionic associations in the electrolytes. First, they could release Li+ from the trapping effect of EOx chains and accelerate Li+ transport. Second, they can associate with Li+ themselves and slow down the Li+ transport. The competition between these two effects relates to the length of the EOx chains. Our simulations suggest that zwitterionic molecules could help manipulate the ionic conductivity of polyethylene oxide electrolytes.

Mechanistic insights on ultra-tough polylactide-based ionic nanocomposites

We report the synthesis and characterization of ultra-tough polylactide-based ionic nanocomposites via melt-blending of commercial polylactide (PLA), imidazolium-functionalized poly(ethylene glycol)-based polyurethane (im-PU) and surface-modified sulfonated silica nanoparticles (SiO2–SO3H) using extrusion techniques. The proximity of bulky pendant imidazolium cationic sites attached onto the highly functionalized polyurethane to the anionic sulfonate groups at the silica nanoparticle surface readily allow maximizing dynamic ionic interactions within the resulting PLA-based materials. This new design leads to a unique property profile that combines ultra-toughness (no break) and ductility (up to 150%), without critical loss of stiffness as well as improved thermal stability (up to 40 °C higher compared to neat PLA). In addition, we present a detailed mechanistic study aiming at elucidating the energy-dissipative toughening in these PLA/im-PU/SiO2–SO3H blends under quasi-static and high-speed loadings (ca. impact, tensile, 3-points bending). Relying on Small-Angle X-Ray Scattering (SAXS), creep and rheological measurements, a toughening mechanism is finally proposed to account for the impact behavior of the resulting ionic nanocomposites.