Anchorage-dependent Cells Research Articles

Biofunctionalization of Cellulose Microcarriers Using a Carbohydrate Binding Module Linked with Fibroblast Growth Factor for the Expansion of Human Umbilical Mesenchymal Stromal Cells in Stirred Suspension Bioreactors.

Mesenchymal stromal cells (MSCs) have the potential to be used as autologous or allogenic cell therapy in several diseases due to their beneficial secretome and capacity for immunomodulation and differentiation. However, clinical trials using MSCs require a large number of cells. As an alternative to traditional culture flasks, suspension bioreactors provide a scalable platform to produce clinically relevant quantities of cells. When cultured in bioreactors, anchorage-dependent cells like MSCs require the addition of microcarriers, which provide a surface for cell attachment while in suspension. The best performing microcarriers are typically coated in animal derived proteins, which increases cellular attachment and proliferation but present issues from a regulatory perspective. To overcome this issue, a recombinant fusion protein was generated linking basic fibroblast growth factor (bFGF) to a cellulose-specific carbohydrate binding module (CBM) and used to functionalize the surface of cellulose microcarriers for the expansion of human umbilical MSCs in suspension bioreactors. The fusion protein was shown to support the growth of MSCs when used as a soluble growth factor in the absence of cellulose, readily bound to cellulose microcarriers in a dose-dependent manner, and ultimately improved the expansion of MSCs when grown in bioreactors using cellulose microcarriers. The use of CBM fusion proteins offers a simple method for the surface immobilization of growth factors to animal component-free substrates such as cellulose, which can be used alongside bioreactors to increase growth factor lifespan, decrease culture medium cost, and increase cell production in the manufacturing of therapeutic cells.

Manufacturing mesenchymal stromal cells in a microcarrier-microbioreactor platform can enhance cell yield and quality attributes: case study for acute respiratory distress syndrome

Mesenchymal stem and stromal cells (MSCs) hold potential to treat a broad range of clinical indications, but clinical translation has been limited to date due in part to challenges with batch-to-batch reproducibility of potential critical quality attributes (pCQAs) that can predict potency/efficacy. Here, we designed and implemented a microcarrier-microbioreactor approach to cell therapy manufacturing, specific to anchorage-dependent cells such as MSCs. We sought to assess whether increased control of the biochemical and biophysical environment had the potential to create product with consistent presentation and elevated expression of pCQAs relative to established manufacturing approaches in tissue culture polystyrene (TCPS) flasks. First, we evaluated total cell yield harvested from dissolvable, gelatin microcarriers within a microbioreactor cassette (Mobius Breez) or a flask control with matched initial cell seeding density and culture duration. Next, we identified 24 genes implicated in a therapeutic role for a specific motivating indication, acute respiratory distress syndrome (ARDS); expression of these genes served as our pCQAs for initial in vitro evaluation of product potency. We evaluated mRNA expression for three distinct donors to assess inter-donor repeatability, as well as for one donor in three distinct batches to assess within-donor, inter-batch variability. Finally, we assessed gene expression at the protein level for a subset of the panel to confirm successful translation. Our results indicated that MSCs expanded with this microcarrier-microbioreactor approach exhibited reasonable donor-to-donor repeatability and reliable batch-to-batch reproducibility of pCQAs. Interestingly, the baseline conditions of this microcarrier-microbioreactor approach also significantly improved expression of several key pCQAs at the gene and protein expression levels and reduced total media consumption relative to TCPS culture. This proof-of-concept study illustrates key benefits of this approach to therapeutic cell process development for MSCs and other anchorage-dependent cells that are candidates for cell therapies.

A 3D-printable gelatin/alginate/ε-poly-l-lysine hydrogel scaffold to enable porcine muscle stem cells expansion and differentiation for cultured meat development

The mass proliferation of seed cells and imitation of meat structures remain challenging for cell-cultured meat production. With excellent biocompatibility, high water content and porosity, hydrogels are frequently-studied materials for anchorage-dependent cell scaffolds in biotechnology applications. Herein, a scaffold based on gelatin/alginate/ε-Poly-l-lysine (GAL) hydrogel is developed for skeletal muscle cells, which has a great prospect in cell-cultured meat production. In this work, the hydrogel GAL-4:1, composed of gelatin (5 %, w/v), alginate (5 %, w/v) and ε-Poly-l-lysine (molar ratio vs. alginate: 4:1) is selected as cell scaffold based on Young's modulus of 11.29 ± 1.94 kPa, satisfactory shear-thinning property and suitable porous organized structure. The commercially available C2C12 mouse skeletal myoblasts and porcine muscle stem cells (PMuSCs), are cultured in the 3D-printed scaffold. The cells show strong ability of attachment, proliferation and differentiation after induction, showing high biocompatibility. Furthermore, the cellular bioprinting is performed with GAL-4:1 hydrogel and freshly extracted PMuSCs. The extracted PMuSCs exhibit high viability and display early myogenesis (desmin) on the 3D scaffold, suggesting the great potential of GAL hydrogel as 3D cellular constructs scaffolds. Overall, we develop a novel GAL hydrogel as a 3D-printed bioactive platform for cultured meat research.

Prognositic value of anoikis and tumor immune microenvironment-related gene in the treatment of osteosarcoma.

Osteosarcoma is a highly aggressive primary malignant bone tumor commonly seen in children and adolescents, with a poor prognosis. Anchorage-dependent cell death (anoikis) has been proven to be indispensable in tumor metastasis, regulating the migration and adhesion of tumor cells at the primary site. However, as a type of programmed cell death, anoikis is rarely studied in osteosarcoma, especially in the tumor immune microenvironment. This study aims to clarify prognostic value of anoikis and tumor immune microenvironment-related gene in the treatment of osteosarcoma. Anoikis-related genes (ANRGs) were obtained from GeneCards. Clinical information and ANRGs expression profiles of osteosarcoma patients were sourced from the therapeutically applicable research to generate effective therapies and Gene Expression Omnibus (GEO) databases. ANRGs highly associated with tumor immune microenvironment were identified by the estimate package and the weighted gene coexpression network analysis (WGCNA) algorithm. Machine learning algorithms were performed to construct long-term survival predictive strategy, each sample was divided into high-risk and low-risk subgroups, which was further verified in the GEO cohort. Finally, based on single-cell RNA-seq from the GEO database, analysis was done on the function of signature genes in the osteosarcoma tumor microenvironment. A total of 51 hub ANRGs closely associated with the tumor microenvironment were identified, from which 3 genes (MERTK, BNIP3, S100A8) were selected to construct the prognostic model. Significant differences in immune cell activation and immune-related signaling pathways were observed between the high-risk and low-risk groups based on tumor microenvironment analysis (all P<0.05). Additionally, characteristic genes within the osteosarcoma microenvironment were identified in regulation of intercellular crosstalk through the GAS6-MERTK signaling pathway. The prognostic model based on ANRGs and tumor microenvironment demonstrate good predictive power and provide more personalized treatment options for patients with osteosarcoma.

Edible mycelium as proliferation and differentiation support for anchorage-dependent animal cells in cultivated meat production

Cultivated meat production requires bioprocess optimization to achieve cell densities that are multiple orders of magnitude higher compared to conventional cell culture techniques. These processes must maximize resource efficiency and cost-effectiveness by attaining high cell growth productivity per unit of medium. Microcarriers, or carriers, are compatible with large-scale bioreactor use, and offer a large surface-area-to-volume ratio for the adhesion and proliferation of anchorage-dependent animal cells. An ongoing challenge persists in the efficient retrieval of cells from the carriers, with conflicting reports on the effectiveness of trypsinization and the need for additional optimization measures such as carrier sieving. To surmount this issue, edible carriers have been proposed, offering the advantage of integration into the final food product while providing opportunities for texture, flavor, and nutritional incorporation. Recently, a proof of concept (POC) utilizing inactivated mycelium biomass derived from edible filamentous fungus demonstrated its potential as a support structure for myoblasts. However, this POC relied on a model mammalian cell line combination with a single mycelium species, limiting realistic applicability to cultivated meat production. This study aims to advance the POC. We found that the species of fungi composing the carriers impacts C2C12 myoblast cell attachment—with carriers derived from Aspergillus oryzae promoting the best proliferation. C2C12 myoblasts effectively differentiated on mycelium carriers when induced in myogenic differentiation media. Mycelium carriers also supported proliferation and differentiation of bovine satellite cells. These findings demonstrate the potential of edible mycelium carrier technology to be readily adapted in product development within the cultivated meat industry.

Seed Train Optimization in Microcarrier-Based Cell Culture Post In Situ Cell Detachment through Scale-Down Hybrid Modeling.

Microcarrier-based cell culture is a commonly used method to facilitate the growth of anchorage-dependent cells like MA 104 for antigen manufacturing. However, conventionally, static cell culture is employed for cell propagation before seeding the production bioreactor with microcarriers (MCs). This study demonstrates the effective replacement of the conventional method by serial subculturing on MCs with in situ cell detachment under optimal conditions in closed culture units. This study proves that MA 104 can be subcultured at least five times on Cytodex 1 MC without the need for separating cells and MC after cell harvest. Process parameters impacting cell growth were studied post in situ cell detachment in a scaled-down model. Optimization, using augmented Design of Experiments (DoE) combined with hybrid modeling, facilitated rapid screening of the design space for critical process parameters (CPPs). Optimized conditions included an inoculation density of >16 cells/bead, 3.5-4.5 g/L of Cytodex 1, and a controlled agitation speed, starting at Njs (minimum agitation speed) for the first day with a maximum increase of 25% thereafter. With these design spaces for CPPs, a cell density of 2.6 ± 0.5 × 106 cells/mL was achieved after five days. This refined bioprocess methodology offers a reliable and efficient approach for seed training in stirred tank reactors, which is particularly beneficial for viral vaccine production.

Downregulation of LAMB3 Altered the Carcinogenic Properties of Human Papillomavirus 16-Positive Cervical Cancer Cells.

Nearly all cervical cancer cases are caused by infection with high-risk human papillomavirus (HR-HPV) types. The mechanism of cervical cell transformation is related to the powerful action of viral oncoproteins and cellular gene alterations. Transcriptomic data from cervical cancer and normal cervical cells were utilized to identify upregulated genes and their associated pathways. The laminin subunit beta-3 (LAMB3) mRNAwas overexpressed in cervical cancer and was chosen for functional analysis. The LAMB3 was predominantly expressed in the extracellular region and the plasma membrane, which play a role in protein binding and cell adhesion molecule binding, leading to cell migration and tissue development. LAMB3 was found to be implicated in the pathway in cancer and the PI3K-AKT signaling pathway. LAMB3 knockdown decreased cell migration, invasion, anchorage-dependent and anchorage-independent cell growth and increased the number of apoptotic cells. These effects were linked to a decrease in protein levels involved in the PI3K-AKT signaling pathway and an increase in p53 protein. This study demonstrated that LAMB3 could promote cervical cancer cell migration, invasion and survival.

Phosphorylation of INF2 by AMPK promotes mitochondrial fission and oncogenic function in endometrial cancer

Mitochondria are highly dynamic organelles capable of altering their sizes and shapes to maintain metabolic balance through coordinated fission and fusion processes. In various cancer types, mitochondrial hyperfragmentation has been frequently observed, contributing to the progression of cancer toward metastasis. Inverted formin 2 (INF2), which resides in the endoplasmic reticulum (ER), has been found to accelerate actin polymerization and drive mitochondrial fission. In this study, we demonstrate that INF2 expression is significantly upregulated in endometrial cancer (EC) and is associated with a poor prognosis in EC patients. INF2 promotes anchorage-dependent and independent EC cell growth in part by facilitating mitochondrial fission. Furthermore, in conditions of energy stress, AMP-activated protein kinase (AMPK) phosphorylates INF2 at Ser1077, leading to increased localization of INF2 to the ER and enhanced recruitment of the dynamin-related protein 1 (DRP1) to mitochondria. This AMPK-mediated phosphorylation of INF2 at Ser1077 facilitates mitochondrial division and promotes EC cell growth. Pathological examination using immunohistochemical analyses revealed a positive correlation between AMPK activity and phosphorylated INF2 (Ser1077) in EC specimens. Collectively, our findings uncover novel molecular mechanisms involving the AMPK-INF2 axis, which regulates mitochondrial dynamics and malignant cell growth in EC.

Human mesenchymal stromal cell adhesion and expansion on fluoropolymer surfaces modified with oxygen and nitrogen-rich plasma polymers

Fluorinated ethylene propylene (FEP) vessels are of significant interest for therapeutic cell biomanufacturing applications due to their chemical inertness, hydrophobic surface, and high oxygen permeability. However, these properties also limit the adhesion and survival of anchorage-dependent cells. Here, we develop novel plasma polymer coatings to modify FEP surfaces, enhancing the adhesion and expansion of human mesenchymal stromal cells (hMSCs). Similar to commercially available tissue culture polystyrene vessels, oxygen-rich or nitrogen-rich surface chemistries can be achieved using this approach. While steam sterilization increased the roughness of the coatings and altered the surface chemistry, the overall wettability and oxygen or nitrogen-rich nature of the coatings were maintained. In the absence of proteins during initial cell attachment, cells adhered to surfaces even in the presence of chelators, whereas adhesion was abrogated with chelator in a protein-containing medium, suggesting that integrin-mediated adhesion predominates over physicochemical tethering in normal protein-containing cell seeding conditions. Albumin adsorption was more elevated on nitrogen-rich coatings compared to the oxygen-rich coatings, which was correlated with a higher extent of hMSC expansion after 3 days. Both the oxygen and nitrogen-rich coatings significantly improved hMSC adhesion and expansion compared to untreated FEP. FEP surfaces with nitrogen-rich coatings were practically equivalent to commercially available standard tissue culture-treated polystyrene surfaces in terms of hMSC yields. Plasma polymer coatings show significant promise in expanding the potential usage of FEP-based culture vessels for cell therapy applications.

Developing a Cell-Microcarrier Tissue-Engineered Product for Muscle Repair Using a Bioreactor System.

Fecal incontinence, although not life-threatening, has a high impact on the economy and patient quality of life. So far, available treatments are based on both surgical and nonsurgical approaches. These can range from changes in diet, to bowel training, or sacral nerve stimulation, but none of which provides a long-term solution. New regenerative medicine-based therapies are emerging, which aim at regenerating the sphincter muscle and restoring continence. Usually, these consist of the administration of a suspension of expanded skeletal-derived muscle cells (SkMDCs) to the damaged site. However, this strategy often results in a reduced cell viability due to the need for cell harvesting from the expansion platform, as well as the non-native use of a cell suspension to deliver the anchorage-dependent cells. In this study, we propose the proof-of-concept for the bioprocessing of a new cell delivery method for the treatment of fecal incontinence, obtained by a scalable two-step process. First, patient-isolated SkMDCs were expanded using planar static culture systems. Second, by using a single-use PBS-MINI Vertical-Wheel® bioreactor, the expanded SkMDCs were combined with biocompatible and biodegradable (i.e., directly implantable) poly(lactic-co-glycolic acid) microcarriers prepared by thermally induced phase separation. This process allowed for up to 80% efficiency of SkMDCs to attach to the microcarriers. Importantly, SkMDCs were viable during all the process and maintained their myogenic features (e.g., expression of the CD56 marker) after adhesion and culture on the microcarriers. When SkMDC-containing microcarriers were placed on a culture dish, cells were able to migrate from the microcarriers onto the culture surface and differentiate into multinucleated myotubes, which highlights their potential to regenerate the damaged sphincter muscle after administration into the patient. Overall, this study proposes an innovative method to attach SkMDCs to biodegradable microcarriers, which can provide a new treatment for fecal incontinence.

Integrated bulk and scRNA sequence identified anoikis-related diagnostic biomarkers and potential association with immune infiltration in type A aortic dissection.

Type-A aortic dissection (TAAD) is common life-threatening cardiovascular diseases with high-morbidity and mortality but the concrete etiology of disease remains unclear, which might disturb or delay the early diagnosis for TAAD. Anoikis is a special form of programmed cell-death (PCD) induced by detachment of anchorage-dependent cells from the extracellular matrix (ECM) or neighboring cells, and has been widely applied to identify anoikis-related biomarkers for the prediction and prognosis in oncological fields. However, the specific roles of anoikis-related genes (ARGs) in TAAD remain unclear. In this study, we first identified and validated eight diagnostic ARGs for TAAD based on multiple RNA-sequence datasets, including CHEK2, HIF1A, HK2, HMGA1, SERPINA1, PTPN1, SLC2A1 and VEGFA. The comprehensive functional annotation was evaluated by the integrated functional enrichments analysis. We identified the activation of inflammatory-related pathways, metabolic reprogramming and angiogenesis, and the inhibition of cardiovascular development pathways in TAAD. Immune cell infiltration (ICI) analysis further demonstrated that innate immune-cells were more dominant than adaptive immune-cells in TAAD tissues, especially in macrophages, monocytes, activated-DC, NKT cells and CD56+dim NK cells. The cellular landscape was further validated by single-cell RNA sequence technology with significant associations with anoikis in TAAD patients. Four vital ARGs (HIF1A, HMGA1, SERPINA1 and VEGFA) were ultimately identified along with the changes of differentiation trajectory, and major expressions were conformably concentrated on Macro1-3, Mono1-2 and Mono4 subtypes. These findings provide a promising diagnostic biomarker for the accurately diagnosing the disease and would be helpful to further explore the potential pathogenesis with anoikis process for TAAD.

Preparation of thermosensitive PNIPAm- based copolymers with tertiary amino and hydroxyl monomer for cell attachment and detachment study

Thermo-responsive microcarriers are essential for large-scale expansion of anchorage-dependent cells in a suspension culture. In this study, the authors prepared four different N-isopropylacrylamide (NIPAm)-based thermosensitive copolymers by copolymerizing with N-hydroxyethyl acrylamide (HEAA), 2-Hydroxyethyl methacrylate (HEMA), 2-(Diethylamino) ethylmethacrylate (DEAEMA), and 2-(Dimethylamino) ethylmethacylate (DMAEMA) through free radical polymerization (FRP) and used them for surface modification of Cytodex-3 microcarrier. The thermosensitive characteristic of the copolymers enabled microcarriers to attach and detach cells in response to temperature changes. Herein, NIH 3T3 cells were used as a model cell line and it was found that the cells' adhesion rate on Cytodex-3 microcarriers modified with different formulations of thermosensitive copolymers was greater than unmodified microcarriers. The microcarriers coated with 5 wt% of the copolymer showed better cell attachment than 3 wt% and 10 wt% copolymer coated microcarriers. Particularly, 5 wt% P(NIPAm-5% HEMA) copolymer coated microcarriers showed excellent cell attachment than other formulations. More importantly, as the temperature was reduced to 4 °C, the cells cultured on copolymer modified microcarriers were completely detached as a cell sheet from it withoutproteolytic enzymetreatment. Besides preserving the functionality and integrity of cellular structures, the thermal-induced detachment of cells from modified microcarriers was much higher (∼9.9 x 104 cells/mL) than cells detached from the original Cytodex-3 (∼7.5x103 cells/mL) in 1 h at 4 °C. Therefore, this study verified that microcarriers modified with thermosensitive copolymers exhibited enhanced cell attachment and detachment with temperature change, while maintaining cell functionality, thereby providing adequate number of viable cells for large scale production.

Solid Lipid Nanoparticles Hydroquinone-Based for the Treatment of Melanoma: Efficacy and Safety Studies.

Classical melanoma therapy has several side effects that are responsible for a decrease in the final therapeutic efficacy. It is possible that the drug is degraded before reaching the target site and is metabolized by the body itself, resulting in repeated doses being administered throughout the day and a decrease in patient compliance. Drug delivery systems avoid degradation of the active ingredient, improve release kinetics, prevent the drug from being metabolized before reaching the site of action, and improve the safety and efficacy profiles of adjuvant cancer therapy. The solid lipid nanoparticles (SLNs) based on hydroquinone esterified with stearic acid realized in this work represent a chemotherapeutic drug delivery system that is useful in the treatment of melanoma. The starting materials were characterized by FT-IR and 1H-NMR, while the SLNs were characterized by dynamic light scattering. In efficacy studies, their ability to influence anchorage-dependent cell proliferation was tested on COLO-38 human melanoma cells. Furthermore, the expression levels of proteins belonging to apoptotic mechanisms were determined by analyzing the role of SLNs in modulating the expression of p53 and p21WAF1/Cip1. Safety tests were conducted to determine not only the pro-sensitizing potential but also the cytotoxicity of SLNs, and studies were conducted to assess the antioxidant and anti-inflammatory activity of these drug delivery.

448 Establishing the efficacy of naturally occurring endocannabinoid-like substance in an in vitro model of Fragile X Tremor/Ataxia Syndrome (FXT/AS)

OBJECTIVES/GOALS: FXT/AS is a devastating, rare neurological syndrome that negatively impacts movement and cognition and is suspected to induce mitochondria dysfunction. Currently, no effective pharmacological treatments for FXTAS exist. The goal is to restore mitochondrial viability using endocannabinoid-like compounds in a cell culture model of FXTAS. METHODS/STUDY POPULATION: To establish a cell model of mitochondrial dysfunction, fibroblast baby hamster kidney (BHK-21) cell lines were treated with glucose oxidase (GluOx) at varying concentrations and times. Mitochondrial viability was assessed by the colorimetric Janus B Green Assay, which stains the mitochondria and enables assessment of cell numbers and the presence of oxygen in anchorage-dependent cell culture. Upon establishing this model of mitochondrial dysfunction, we next investigated the ability of three novel mitochondrial antioxidants (e.g., macamides) to protect mitochondrial viability. RESULTS/ANTICIPATED RESULTS: GluOx treatment of BHK-21 cells caused a dose- and time-dependent increase in oxidative stress. The data demonstrated significant disruption in the morphology of BHK-21 cells at a high glucose concentration, i.e., 40 nM, between 2 and 24 hours post-exposure. The morphology data were confirmed by the Janus B Green colorimetric assay. In examining the effects of glucose on mitochondrial viability, we demonstrated that at 15, 30, 35, and 40 nM, glucose significantly decreased mitochondria viability compared to the untreated, with 40 nM having the greatest effect. Under these conditions of mitochondrial dysfunction, co-incubation of the cells with the 0.5 uM MAM69 macamide attenuated the GluOx-induced increase in oxidative stress, with 0.5 uM MAM69 alone showing no effect on mitochondria viability. DISCUSSION/SIGNIFICANCE: This study illustrates the efficacy of macamides, natural occurring endocannabinoid like-compound, as novel prognostic and therapeutic candidates in the treatment of mitochondrial dysfunction that is associated with FXTAS. The use of BHK-21 fibroblast cells provides a rapid screening model to test for pharmacological therapeutic efficacy.

Biomanufacturing Recombinantly Expressed Cripto-1 Protein in Anchorage-Dependent Mammalian Cells Growing in Suspension Bioreactors within a Three-Dimensional Hydrogel Microcarrier.

Biotherapeutic soluble proteins that are recombinantly expressed in mammalian cells can pose a challenge when biomanufacturing in three-dimensional (3D) suspension culture systems. Herein, we tested a 3D hydrogel microcarrier for a suspension culture of HEK293 cells overexpressing recombinant Cripto-1 protein. Cripto-1 is an extracellular protein that is involved in developmental processes and has recently been reported to have therapeutic effects in alleviating muscle injury and diseases by regulating muscle regeneration through satellite cell progression toward the myogenic lineage. Cripto-overexpressing HEK293 cell lines were cultured in microcarriers made from poly (ethylene glycol)-fibrinogen (PF) hydrogels, which provided the 3D substrate for cell growth and protein production in stirred bioreactors. The PF microcarriers were designed with sufficient strength to resist hydrodynamic deterioration and biodegradation associated with suspension culture in stirred bioreactors for up to 21 days. The yield of purified Cripto-1 obtained using the 3D PF microcarriers was significantly higher than that obtained with a two-dimensional (2D) culture system. The bioactivity of the 3D-produced Cripto-1 was equivalent to commercially available Cripto-1 in terms of an ELISA binding assay, a muscle cell proliferation assay, and a myogenic differentiation assay. Taken together, these data indicate that 3D microcarriers made from PF can be combined with mammalian cell expression systems to improve the biomanufacturing of protein-based therapeutics for muscle injuries.

Transfection Efficacy and Cellular Uptake of Lipid-Modified Polyethyleneimine Derivatives for Anionic Nanoparticles as Gene Delivery Vectors.

Cationic polyethylenimine (PEI)-based nonviral gene carriers have been desirable to overcome the limitations of viral vectors in gene therapy. A range of PEI derivatives were designed, synthesized, and evaluated for nonviral delivery applications of plasmid DNA (pDNA). Linolenic acid, lauric acid, and oleic acid were covalently conjugated with low-molecular-weight PEI (Mw ∼ 1200 Da) via two different linkers, gallic acid (GA) and p-hydroxybenzoic acid (PHPA), that allows a differential loading of lipids per modified amine (3 vs 1, respectively). 1H NMR spectrum confirmed the expected structure of the conjugates as well as the level of lipid substitution. SYBR Green binding assay performed to investigate the 50% binding concentration (BC50) of lipophilic polymers to pDNA revealed increased BC50 with an increased level of lipid substitution. The particle analysis determined that GA- and PHPA-modified lipopolymers gave pDNA complexes with ∼300 and ∼100 nm in size, respectively. At the polymer/pDNA ratio of 5.0, the ζ-potentials of the complexes were negative (-6.55 to -10.6 mV) unlike the complexes with the native PEI (+11.2 mV). The transfection experiments indicated that the prepared lipopolymers showed higher transfection in attachment-dependent cells than in suspension cells based on the expression of the reporter green fluorescent protein (GFP) gene. When loaded with Cy3-labeled pDNA, the lipopolymers exhibited effective cellular uptake in attachment-dependent cells while the cellular uptake was limited in suspension cells. These results demonstrate the potential of lipid-conjugated PEI via GA and PHPA linkers, which are promising for the modification of anchorage-dependent cells.

Cytophilic Agarose-Epoxide-Amine Cryogels Engineered with Granulated Microstructures.

Inherent cytophobicity of agarose limits its direct use for the growth of anchorage-dependent cells. Here, we report a simple strategy allowing the development of agarose-based hydrogels entailed with both cytophilicity and microstructured morphology. Through the reaction of water-soluble 1,4-butanediol diglycidyl ether (BDDE) with trifunctional polyetheramine Jeffamine T403 in agarose solution followed by cryogelation of the mixtures, a series of macroporous agarose-epoxide-amine cryogels were prepared readily. Results from fluorescent labeling and energy-dispersive X-ray elemental mapping showed the formation of granulated microstructures in the cryogels. Such features closely correlated to the phase separation of BDDE-T403 polymers within the agarose matrix. Cytophilicity of the microstructured cryogels due to the integrated amine moieties was demonstrated through the adhesion of fibroblasts. Functional enrichment of the cryogels was further highlighted by leveraging the granulates as micro-reservoirs for polyphenol proanthocyanidin to enable antioxidation and protection of fibroblasts from H2O2-induced cytotoxic effect in vitro.

Conoidin A Abrogates Growth of Anchorage-Dependent and Anchorage-Independent SKOV3 Ovarian Cancer Cells

Ovarian cancer is one of the leading causes of cancer death in the United States with only 49% of women surviving 5 years after initial diagnosis. Poor screening methods, chemoresistance, and its high metastatic capacity make this disease difficult to treat. Thus, improved treatment methodologies are necessary to improve survival rates and quality of life for ovarian cancer patients. Conoidin A is a water-soluble covalent inhibitor of peroxiredoxin 1 (PRDX1) and peroxiredoxin 2 (PRDX2). While its effects have been primarily studied on parasites, recent studies also begin to elucidate the impacts of conoidin A in other human health conditions, including anticancer effects. However, the anticancer effects and potential utility of conoidin A as a therapeutic, specifically in ovarian cancer, has yet to be investigated. Here, we report that conoidin A eliminates growth of anchorage-dependent and anchorage-independent SKOV3 cells. Furthermore, analyses of clinical samples show increased expression of PRDX1 and PRDX2 in ovarian cancerous tissue, which are the targets of conoidin A. These data identify conoidin A as a potential therapeutic for early and late-stage ovarian cancer and warrants further investigation. (First Online: December 31, 2022)

Improve Wettability of Polycaprolactone (PCL) /Chitosan of Wound Dressings by Plasma Jet

Surface wettability plays a significant role in determining the function of the wound dressing. They should have hydrophobic surfaces for the adsorption of bacteria and a hydrophilic surface necessary to improve cell attachment for most anchorage-dependent cell types. Furthermore, the Hydrophobicity / Hydrophilicity of the surface can be used to direct cellular processes such as cell initial correlation, adhesion, and migration during wound healing, as a result such surface can change its surface wettability which increases the dressing's usefulness. In this research, nanomembres were prepared from polycaprolactone and chitosan solution (with different amounts of CS (0.05, 0.1, 0.2, and 0.4) % (w/w)) by the electrospinning method. These membranes were characterized by Fourier-transform infrared FTIR spectroscopy and their wettability, contact angle, porosity and swelling values were determined. These were improved by plasma treating the electrospun nanomebranes. Best results were obtained for the plasma treated electrospum nanomembranes at 4% chitosan. It resulted in a surface with a combination of hydrophobic and hydrophilic patterns, which has a lot of promise in the realm of tissue engineering for things like cell patterning and guiding.

The strategic uses of collagen in adherent cell cultures.

The culture of adherent mammalian cells involves adhesion to the tissue culture vessel. This requires attachment factors from serum and/or a suitable substrate on the vessel surface. Some cells require collagen or other substrates to promote neurite outgrowth, differentiation or growth. However, laboratories often lack guidance on the selection and/or optimisation of collagen. We model such selection/optimisation work in the PC12 neuronal cell line. PC12 (NS-1 variant) cells require a substrate for adherence. Comparing cell attachment against a series of substrates, we found collagen IV to be optimal. We show by comparison of morphology against a range of concentrations that 10 µg/ml is sufficient for supporting cell attachment, and also differentiation. PC12 cells from Riken Cell Bank do not require a substrate for routine culturing but only for differentiation. As all substrates supported attachment equally well, we used a novel serum-free approach and identified collagen IV as its preferred substrate. For these cells, Dulbecco's modified eagle's medium but not Roswell Park Memorial Institute (RPMI)media supports normal cell attachment. However, coating with collagen IV enabled the cells to grow equally well in RPMI. Hence the strategic use of collagen is essential in laboratories working with anchorage-dependent cell lines.