Visualization Of Anatomy Research Articles

Added value of zoomed-echo-planar imaging diffusion-weighted imaging for evaluation of periampullary carcinomas.

To assess the image quality feasibility and diagnostic value of zoomed diffusion-weighted imaging (z-EPI DWI) using echo-planar imaging (EPI) compared with conventional DWI (c-EPI DWI) in patients with periampullary disease. Thirty-six patients with periampullary carcinomas and fifteen with benign periampullary disease were included in this study. All the subjects underwent MR cholangiopancreatography (MRCP), c-EPI DWI, and z-EPI DWI. Two radiologists independently assessed image quality of the two image sets, including overall image quality and lesion conspicuity. In addition, signal intensity and ADC measurements of DWIs in the periampullary lesions were conducted. Diagnostic accuracies of the combined image sets of MRCP and z-EPI DWI were compared with those of a combined set of MRCP and c-EPI DWI. z-EPI DWI showed significantly better image quality scores (anatomic structure visualization, 2.94 ± 0.24; overall image quality, 2.96 ± 0.17) compared to that with c-EPI DWI (anatomic structure visualization, 2.02 ± 0.22; overall image quality, 2.04 ± 0.24) (both P < 0.01). For all the periampullary malignant lesions and small lesions (≤20 mm), there was better delineation of lesion conspicuity and the lesion margin, as well as diagnostic confidence with z-EPI DWI (all P<0.05). The rate of periampullary malignancy's hyperintense signal on z-EPI DWI was increased to 91.7% (33/36) compared to c-EPI DWI (69.4% (25/36)) (P = 0.023). For all malignant lesions and small lesions, the diagnostic accuracy scores were increased using the MRCP and z-EPI DWI combined set, compared to the MRCP and c-EPI DWI combined set (P<0.05). Diagnostic accuracy for detection and differentiation of malignant lesions from benign lesions significantly improved for the MRCP and z-EPI DWI combined set compared with MRCP and c-EPI DWI combined set (P<0.05). There were no significant differences between c-EPI DWI and z-EPI DWI in the ADC values of periampullary malignant and benign lesions (P>0.05). z-EPI DWI has an advantage that could lead to remarkable image quality improvements and enhanced lesion visualization of periampullary carcinomas. z-EPI DWI was superior to c-EPI DWI for detecting, delineating, and diagnosing the lesions, particularly for small challenging lesions.

Three-dimensional Printing and Modeling in Interventional Cardiology: A Comprehensive Review

Abstract Cardiovascular disease (CVD) is one of the leading causes of death, with an increasing incidence of coronary heart disease, heart failure, and arrhythmias. The significance of surgical interventions across cardiovascular conditions requires modern imaging modalities that better visualize the anatomy of the heart across different patient demographics, aiding in preprocedural planning and intraoperative procedures. We conducted a literature search in databases such as PubMed/Medline and ScienceDirect and included a comprehensive analysis of findings from articles in English related to three-dimensional (3D) printing in the anatomical visualization, preprocedural surgical planning, and therapeutic use for various cardiovascular conditions. With the incorporation of cardiac imaging techniques, 3D models can recapitulate the coronary vasculature to understand the pathophysiology of atherosclerosis and thromboembolisms, as well as diving into its clinical applications in preoperative surgical planning and assisting in interventional procedures for congenital heart defects, valvular disorders, tachyarrhythmias, aneurysms, and cardiomyopathy. We also identified that the integration of scaffolds and biomaterial could assist in regenerative medicine alongside 3D printing and its applications in the treatment of coronary artery disease and ischemic heart conditions. Our review concludes that the literature surrounding 3D-printed models is promising but requires further investigations on its large-scale translational impact on patient care.

Multislice computed tomography angiography in assessment of pulmonary vascular abnormalities

Abstract Background Multidetector computed tomography (CT) angiography with maximum intensity projection, multiplanar reformations and 3D reconstructions, and volume rendering technique provide visualization of normal vascular anatomy and variants. Aim The aim of this work was to evaluate the role of multislice CT angiography in the evaluation of pulmonary vascular diseases, classification of diseases, and to be familiar with technique and finding. Patients and methods This observational trial was carried out on 30 cases suspected of or diagnosed with acute chest pain, suspected pulmonary embolism, and pulmonary arterial or pulmonary venous abnormalities. Patients were classified equally into two groups. All patients underwent pulmonary angiography using CT, which involved the following steps: preparation of the patient, examination procedure, data collection, reconstruction and postprocessing of the images, and image explanation. Results In group 1, 60% of cases had normal pulmonary vein whereas 20% of them had venous drainage anomaly. The majority of cases (86.7%) had confluent pulmonary artery findings. The highest percent of cases had dilatation of main pulmonary artery, left pulmonary artery (46.7%), and right pulmonary artery. Overall, 26.7% had either atretic or hypoplastic main pulmonary artery, 40% had normal right pulmonary artery, and 26.7% had normal left pulmonary artery. In group 2, 80% of cases had normal pulmonary vein, whereas 20% had abnormal findings. The majority of cases (80.0%) had pulmonary embolism, and 33.3% had pulmonary hypertension (one case had both embolism and hypertension). Conclusions CT angiography is a very effective and beneficial method in the evaluation of pulmonary vascular abnormalities with or without congenital cardiac and/or extracardiac anomalies.

Utility of the continuous intraoperative neuromonitoring in the prevention of the recurrent laryngeal nerve paralysis during thyroid surgery. A prospective observational study

BackgroundThe continuous intraoperative neuromonitoring (C-IONM) of the recurrent laryngeal nerve (RLN) could help reducing the incidence of nerve paralysis after thyroid surgery, in comparison with the mere anatomical visualization of the RLN. The objective is to assess the efficacy and utility of C-IONM as a predictive test for recurrent laryngeal nerve paralysis after thyroidectomy. MethodsA prospective observational study was performed in 248 patients who underwent thyroid surgery where C-IONM was applied, between September 2018 and December 2019, in a high-volume center. A previous and later laryngoscopy was performed, which allowed to evaluate the reliability of the C-IONM as a predictive test for recurrent paralysis. Sensitivity (SE), specificity (SP), positive predictive value (PPV), negative predictive value (NPV) were studied. ResultsA total number of 171 thyroidectomies, 62 hemithyroidectomies, 15 totalization thyroidectomies and 27 thyroidectomy with cervical dissections were performed. Postoperative laryngoscopy was altered in 40 patients (16.12%). The SE, SP, PPV and NPV values ​​were 65%, 94.7%, 70.2% and 93.4% respectively. ConclusionsC-IONM is a safe technique that provides real-time information about anatomical and functional integrity of the RLN and can improve the results of thyroid surgery.

IVUS-guided versus OCT-guided PCI among patients presenting with acute coronary syndrome

BackgroundIntravascular imaging modalities such as intravascular ultrasound (IVUS) and, more recently, optical coherence tomography (OCT) improved the visualization of coronary anatomy and plaque pathology. We aimed to compare the procedural and short-term outcomes between IVUS-guided and OCT-guided percutaneous coronary interventions (PCIs) in patients with acute coronary syndrome (ACS).MethodsIn the present retrospective study, we reviewed the data of 50 patients who had IVUS-guided PCI and 50 patients who had OCT-guided PCI for ACS between January 2020 and June 2021. Intravascular imaging was done before and after stenting. Both groups were compared in terms of minimal luminal area (MLA), stent dimensions, final minimal stent area (MSA) and stent expansion as well as negative angiographic outcomes. Patients were followed for six months to record major adverse cardiac events (MACE).ResultsThe patients’ mean age was 57 ± 13 years with male predominance (78%). The radiation time and dose were significantly higher among IVUS group. Pre-stenting MLA was significantly higher in IVUS group (2.63 mm vs. 2.22 mm in OCT, P = 0.013). Stent expansion was significantly higher among OCT group (97% vs. 93% in IVUS group, P = 0.001) with no significant difference between both groups regarding MSA [mm2] (8.88 ± 2.87 in IVUS vs. 8.1 ± 2.76 in OCT, P = 0.169). No significant difference between both groups was noted regarding contrast volume, edge dissection, tissue prolapse, and no reflow. The rates of six-month MACE were significantly higher in the IVUS group.ConclusionsOCT-guided PCI in ACS is safe and is associated with similar MSA to that of IVUS-guided PCI. Future randomized trials are needed to confirm these findings.Graphical

3D assessment of graft malposition after ACL reconstruction: Comparison of native and 11o'clock ligament orientations

BackgroundFemoral tunnel malposition makes up the majority of technical failures for ACL reconstructive surgery. The goal of this study was to develop adolescent knee models that accurately predict anterior tibial translation when undergoing a Lachman and pivot shift test with the ACL in the 11o’clock femoral malposition (Level of Evidence: IV). MethodsFEBio was used to build 22 subject-specific tibiofemoral joint finite element representations. To simulate the two clinical tests, the models were subject to loading and boundary conditions established in the literature. Clinical, historical control data were used to validate the predicted anterior tibial translations. ResultsA 95% confidence interval showed that with the ACL in the 11o’clock malposition, the simulated Lachman and pivot shift tests produced anterior tibial translations that were not statistically different from the in vivo data. The 11o’clock finite element knee models resulted in greater anterior displacement than those with the native (approximately 10o’clock) ACL position. The difference in anterior tibial translation between the native and 11o’clock ACL orientations was statistically significant. ConclusionClinically, by understanding the impact that ACL orientation has in anterior tibial displacement biomechanics, surgical interventions can be improved to prevent technical errors from occurring. The integration of this methodology into surgical practice not only allows for anatomical visualization prior to surgery, but also creates the opportunity to optimize graft placement, thus improving post-surgical outcomes.

MRI enhances the understanding of critical anatomy during primary laparoscopic port placement.

Despite the majority of laparoscopic visceral injuries occurring with primary entry, high-fidelity training models are lacking. Three healthy volunteers underwent non-contrast 3T MRI at Edinburgh Imaging. A direct entry 12mm trocar was filled with water to improve MR visibility, placed on the skin at entry points, then images were acquired in the supine position. Composite images were created, and distances from the trocar tip to the viscera were measured, demonstrating anatomical relationships during laparoscopic entry. With a BMI of 21 kg/m2, gentle downward pressure during skin incision or trocar entry reduced the distance to the aorta to less than the length of a No. 11 Scalpel blade (22mm). The need for counter-traction and stabilisation of the abdominal wall during incision and entry is demonstrated. With a BMI of 38 kg/m2, deviating from the vertical angle for trocar insertion can result in the entire trocar shaft being placed within the abdominal wall without entering the peritoneum, creating a 'failed entry.' At Palmer's point distance between the skin and bowel is only 20mm. Ensuring the stomach is not distended will minimise gastric injury risk. The use of MRI to provide visualisation of the critical anatomy during primary port entry allows the surgeon to gain better understanding of textually described best practice techniques.

Coronary sinus cannulation as real time anatomical landmark to facilitate left bundle branch area pacing

Abstract Funding Acknowledgements Type of funding sources: None. Background/Introduction Left bundle branch area pacing (LBBAP) is an established form of conduction system pacing. Innovative fluoroscopic imaging technique with use of radio-opaque contrast in the right ventricle or using pre-mapped His potential has been advocated as an acquired road map to assist in implantation of LBBAP(1) lead. Purpose We aim to explore a different technique by cannulating the coronary sinus (CS) with a sheath and wire to provide real-time anatomical guidance of location of the base of the heart to facilitate more effective LBBAP in a consistent fashion. Methods Prior to LBBAP, the body of the CS is cannulated using an AL2 diagnostic angiographic catheter and a 0.035-inch glidewire. The wire is fixated externally, and fluoroscopic image is acquired before proceeding with deployment of the pacing lead onto an optimal ventricular septal position via standard right (RAO 30) and left anterior oblique (LAO 30) views. From August 2021 to October 2022, we enrolled 12 consecutive patients requiring pacemaker for standard indications and explored the CS cannulation method in delivering LBBAP with either steerable catheters or fixed shape sheaths. Thereafter, we analysed and described the success rates, immediate electrical and device parameters, procedural durations, and clinical events. Results 12 patients were studied. The mean age was 75 ± 13.07 years and 6 (50%) patients were male. 1 (8.3%) was for sinus nodal dysfunction, 10 (83.3%) for atrioventricular block and 1 (8.3%) for atrial fibrillation (AF) control with atrioventricular node ablation. Mean left ventricular ejection fraction was 54.17 ± 8.21 % and baseline QRS was 108.08 ± 23.20ms. LBBAP was successful in all 12 patients based on published criteria with a mean paced QRS duration of 115.25 ± 9.28 ms. The mean total procedure duration was 130.75 +/- 29.84 minutes and mean fluoroscopic duration was 23.17 ± 9.11 minutes. After 1st week post implant, the pacing threshold, sensing, and impedances were stable and acceptable in all the patients. There were no acute complications (e.g. pneumothorax, lead complications, lead dislodgements / perforations) during the periprocedural period. Conclusion(s) The CS cannulation method is a feasible, safe, and effective method to to provide real-time anatomical visualisation of the base of the heart. This facilitates the achievement for optimal LBBAP and can be adopted especially in difficult cardiac anatomies or rotated cardiac silhouettes identified on fluoroscopy.

Human Middle Ear Anatomy Based on Micro-Computed Tomography and Reconstruction: An Immersive Virtual Reality Development

Background: For almost a decade, virtual reality (VR) has been employed in otology simulation. The realism and accuracy of traditional three-dimensional (3D) mesh models of the middle ear from clinical CT have suffered because of their low resolution. Although micro-computed tomography (micro-CT) imaging overcomes resolution issues, its usage in virtual reality platforms has been limited due to the high computational requirements. The aim of this study was to optimize a high-resolution 3D human middle ear mesh model suitable for viewing and manipulation in an immersive VR environment using an HTC VIVE VR headset (HTC and Valve Corporation, USA) to enable a seamless middle ear anatomical visualisation viewing experience in VR while preserving anatomical accuracy. Methods: A high-resolution 3D mesh model of the human middle ear was reconstructed using micro-CT data with 28 μm voxel resolution. The models were optimised by tailoring the surface model polygon counts, file size, loading time, and frame rate. Results: The optimized middle ear model and its surrounding structures (polygon counts reduced from 21 million polygons to 2.5 million) could be uploaded and visualised in immersive VR at 82 frames per second with no VR-related motion sickness reported. Conclusion: High-resolution micro-CT data can be visualized in an immersive VR environment after optimisation. To our knowledge, this is the first report on overcoming the translational hurdle in middle ear applications of VR.

Dissection, digitization, and three-dimensional modelling: a high-fidelity anatomical visualization and imaging technology.

Technological advances have enabled the development of a novel technique of dissection, digitization and three-dimensional modelling of skeletal muscle and other tissues including neurovascular structures as in situ over the last 25years. Meticulous serial dissection followed by digitization is used to collect Cartesian coordinate data of the contractile and connective tissue elements throughout the entire muscle volume. The Cartesian coordinate can then be used to construct high-fidelity three-dimensional models that capture the spatial arrangement of the contractile and connective tissue elements as in situ enabling detailed studies of the arrangement of the fiber bundles and their attachment sites to aponeuroses, tendon, and bone. In the laboratory, we have concurrently developed a computational methodology to quantify architectural parameters, including fiber bundle length, pennation angle, volume, physiological cross-sectional area in three-dimensional space. In this paper, a flexor digitorum superficialis specimen will be used to demonstrate the high-fidelity outcomes of dissection, digitization, and three-dimensional modelling. This three-step methodology provides a unique opportunity to study muscle architecture in three dimensions, as in situ. Knowledge translation from the anatomy laboratory to the clinical setting has been highly successful.

The radiation dose, clinical and anatomical implications of erect lumbar spine radiography: A single centre pre-post implementation evaluation

IntroductionLumbar radiographs remain a common imaging examination despite strategies to reduce their use. Many authors have demonstrated benefits in changing from traditional supine and recumbent lateral projections to a prone and/or erect orientation. Despite evidence of clinical and radiation dose optimisation, widespread adoption of these strategies has stalled. This article describes the single-centre implementation and evaluation of erect PA and lateral projections. MethodThis was an observational study pre- and post-implementation of an erect imaging protocol. Patient BMI, image field size, source image and source object distances and DAP were collected together with assessment of radiographic spinal alignment and disc space demonstration. Effective dose was calculated with organ specific doses. Results76 (53.5%) patients were imaged in the supine AP and recumbent lateral position, 66 (46.5%) had erect PA and lateral radiographs. Despite the larger BMI of the erect cohort and similar field sizes, effective dose was lower in the PA position by an average of 20% (p < 0.05), however, no significant difference in lateral dose. Anatomical improvements were evident with greater visualisation of intervertebral disc spaces in the PA erect (t = −9.03; p < .001) and lateral (t = −10.298; p < .001) orientations. Erect PA radiographs demonstrated a leg length discrepancy in 47.0% (0.3–4.7 cm) and a scoliosis in 21.2% of cases, with a significant link between these findings (r (64) = 0.44; p < .001). ConclusionErect lumbar spine radiography provides information on clinical outcomes not available with recumbent projections. The improvements in anatomical visualisation and radiation dose reduction supports the local change in practice. Implications for practice- Erect imaging can reduce effective dose with an optimised acquisition protocol- additional pathological information can be revealed by the erect posture.- postural awareness is critical to interpret images accurately.

Residents' Perceptions of a Novel Virtual Livestream Cadaveric Teaching Series for Musculoskeletal Anatomy Education.

Musculoskeletal anatomy education is essential to many healthcare providers but has consistently been considered difficult for various reasons. Traditional methods have focused on in-person cadaveric teaching, which became inaccessible during the COVID-19 pandemic; therefore, new teaching methods were developed to address this gap in education. This project implemented novel virtual livestream musculoskeletal anatomy teaching methodology with cadaveric prosections and evaluated the efficacy of this modality compared with traditional in-person cadaveric teaching. A targeted musculoskeletal anatomy curriculum was developed and delivered via livestream to 12 Canadian physiatry residents. Upon completing the virtual curriculum, residents completed an anonymous survey assessing this new virtual livestream cadaveric methodology compared with previous experiences with traditional in-person anatomy teaching. The survey response rate was 92%. Most participants (73%) rated the virtual livestream sessions as better than traditional in-person teaching. Reasons included better visualization of cadaveric anatomy and easy discussion among the group. T test analysis comparing both methods demonstrated the livestream method was equivalent or better across several domains. Virtual livestream teaching is a viable method for teaching the important subject of musculoskeletal anatomy. Educators should consider how to best integrate this approach into future anatomy curricula.

Complementary role of Indocyanine green video angiography, dual-image video angiography and flow-800

Background Visualization of cerebral vessels, their branches and the surrounding structures are essential during cerebrovascular surgery. Indocyanine green dye-based video angiography is a commonly used technique in cerebrovascular surgery. This paper aims to analyze the real-time imaging of ICG-AG, DIVA, and the use of ICG-VA with Flow 800 to compare their usefulness in surgery. Methods Intraoperative real-time identification of vascular and surrounding structures in twenty nine anterior circulation aneurysms and three posterior circulation aneurysm clipping, one STA-MCA bypass, and two carotid endarterectomies were performed in patients using ICG-VA alone, DIVA, ICG-VA with Flow 800 to analyze and compare each of these methods in details. Results ICG-VA and DIVA couldn’t visualize perforators in twenty-three cases of cerebral aneurysms clipping when used alone. Compared to that by adding Flow 800 perforators were easily visualized. In three cases, occlusion of perforators after clip application was visualized by DIVA and solved by repositioning surgical clips. In one STA-MCA bypass surgery, adequate blood flow to cortical branches of MCA (M4) from STA branches was assessed with ICG-VA, DIVA, and the use of ICG-VA with Flow 800 color mapping. ICG-VA, DIVA, and Flow 800 observed the lack of blood flow and fluttering atherosclerotic plaques in carotid endarterectomy. In one case of basilar tip aneurysm, we used ICG-VA with Flow 800; the intensity diagram drawn after determining regions of interest showed that there was no flow within the aneurysm sac after clipping. Conclusion In real-time surgery, a multimodal approach using ICG-VA, DIVA, and ICG-VA with Flow 800 colour mapping can serve as useful tools for better visualization of vascular and surrounding structures. The benefits of flow 800 color mapping, such as determining regions of interest, intensity diagrams, and color-coded images, outweigh the advantages over the ICG-VA and DIVA in the visualization of critical vascular anatomy in humans during surgical procedures.

Extrinsic and intrinsic musculature of the raptorial forelegs in Mantodea (Insecta) in the light of functionality and sexual dimorphism.

Prehensile raptorial forelegs are prey capturing and grasping devices, best known for praying mantises (Mantodea) within insects. They show strong morphological and behavioral adaptations towarda lifestyle as generalist arthropod predators. In the past, few species of Mantodea were investigated, concerning morphological variability of the raptorial forelegs. Especially the knowledge of foreleg anatomy in the light of functional and comparative morphology is scarce. Our comparative approach is based on the, for arthropods very common, "female-biased sexual size dimorphism"(SSD) that occurs in almost every Mantodea species. Within Mantodea, this SSD is likely leading to a shift of the exploited ecological niche between male and female individuals due to changes in, for example, the possible prey size; which might be reflected in the chosen ecomorphs. In this context, we analyzed the musculature of the raptorial forelegs of female and male specimens in five different species with varying SSD, using high-resolution microcomputed tomography and dissection. We were able to confirm the presence of 15 extrinsic and 15 intrinsic muscles-including one previously undescribed muscle present in all species. Thus, presenting a detailed description and illustrative three-dimensional anatomical visualization of the musculature in Mantodea. Interestingly, almost no observable differences were found, neither between species, nor between the sexes. Furthermore, we homologized all described muscles, due to their attachment points, to the comprehensive nomenclature established by Friedrich and Beutel (2008), discussed potential functionality of the muscles and possible homologies to the neuropteran Mantispa styriaca (Büsse et al., 2021) and the newly introduced leg nomenclature by Aibekova et al. (2022). By elucidating the anatomy, particularly in the context of functionality and SSD, our results complement previous knowledge of the raptorial forelegs, and facilitate a better understanding of the underlying biomechanical system of the predatory strike, and ultimately, a future comparison to other insect taxa.

Three-Dimensional Modeling and Extended Reality Simulations of the Cross-Sectional Anatomy of the Cerebrum, Cerebellum, and Brainstem.

Understanding the anatomy of the human cerebrum, cerebellum, and brainstem and their 3-dimensional (3D) relationships is critical for neurosurgery. Although 3D photogrammetric models of cadaver brains and 2-dimensional images of postmortem brain slices are available, neurosurgeons lack free access to 3D models of cross-sectional anatomy of the cerebrum, cerebellum, and brainstem that can be simulated in both augmented reality (AR) and virtual reality (VR). To create 3D models and AR/VR simulations from 2-dimensional images of cross-sectionally dissected cadaveric specimens of the cerebrum, cerebellum, and brainstem. The Klingler method was used to prepare 3 cadaveric specimens for dissection in the axial, sagittal, and coronal planes. A series of 3D models and AR/VR simulations were then created using 360° photogrammetry. High-resolution 3D models of cross-sectional anatomy of the cerebrum, cerebellum, and brainstem were obtained and used in creating AR/VR simulations. Eleven axial, 9 sagittal, and 7 coronal 3D models were created. The sections were planned to show important deep anatomic structures. These models can be freely rotated, projected onto any surface, viewed from all angles, and examined at various magnifications. To our knowledge, this detailed study is the first to combine up-to-date technologies (photogrammetry, AR, and VR) for high-resolution 3D visualization of the cross-sectional anatomy of the entire human cerebrum, cerebellum, and brainstem. The resulting 3D images are freely available for use by medical professionals and students for better comprehension of the 3D relationship of the deep and superficial brain anatomy.

2nd and 3rd generation full endoscopic lumbar spine surgery: clinical safety and learning curve.

2nd and 3rd generation endoscopic spine surgery techniques offer visualisation of familiar inter-laminar anatomy to spinal surgeons. We have prospectively evaluated the clinical outcome, complications and learning curve associated with these techniques in patients with lumbar spine radiculopathy. This is a prospective study of 50 consecutive patients with radicular pain from disc herniation and/or lateral recess stenosis. In 6 patients, endoscopy couldn't be done. Operating times, PROM's (VAS, ODI and EQ-5D scores) and complication rates of 44 patients were evaluated after mean FU of 52months (range 39-65). MRI was used to divide these into protrusions (n = 19), extrusions (n = 17) and lateral recess stenosis (n = 8). Evidence about the learning curve was gathered by curvilinear regression analyses. Using a composite clinical success criterion, 95% patients had a successful outcome, with no major complications. ODI, VAS and EQ-5D scores had a statistically significant improvement and achieved MCID. Revision discectomy rate was only 4.5% (n = 2). MRI based grouping, case sequence and degree of difficulty influenced the duration of surgery and a learning curve was found for protrusions and lateral recess decompressions, but not for extrusions. A learning curve effect was also observed with respect to the ODI. Although anatomy visualised in 2nd and 3rd generation endoscopy is familiar to spinal surgeons, our learning curve experience suggests a careful and MRI pathology based take up of this technique in clinical practice, despite its clinical safety in our series. Level 3, prospective cohort study.

A four-wall virtual reality visualization of patient-specific anatomy: Creating full user immersive experience from computed tomography scans

Virtual reality is the future of medical imaging diagnosis. Previous studies have introduced virtual reality rendering of anatomical models while others have mentioned processes to extract 3D models from Computed Tomography (CT) images. In this study, we provide a detailed workflow to transforming patient-specific two-dimensional (2D) CT dicom format imaging files to three-dimensional (3D) immersive, dynamic and interactive anatomical assembly models while incorporating them into a four-wall virtual reality environment system. Our study implemented 3D CAD and virtual reality capacities through software and engineering design tools to transform 2D medical images into interactive 3D models in our system. In doing so, the user was able to gain a sense of depth, scale, and dimensionality while immersed in the environment and while implementing interactive tools to investigate patient- specific hip-femur dynamics. At the same time, users were able to identify key anatomical landmarks in the patients’ hip joints. Applications of the VR system to the medical field and orthopedics, in particular, were discussed.

Does Utilizing IRIS, a Segmented Three-dimensional Model, Increase Surgical Precision During Robotic Partial Nephrectomy?

Preservation of renal parenchyma is a major goal when performing a partial nephrectomy. IRIS anatomical visualization software generates a segmented 3D model, allowing improved visualization of the tumor and surrounding structures. We hypothesize that using IRIS intraoperatively during partial nephrectomy on complex tumors increases the precision of surgical procedures and therefore may result in more tissue preservation. We identified 74 non-IRIS and 19 IRIS patients who underwent partial nephrectomy, with nephrometry scores of 9, 10, and 11. Propensity scores were used to match 18 pairs of patients on nephrometry score, age, and tumor volume. Pre- and postoperative imaging (MRI/CT) was obtained. Volumes of the preoperative tumor and preoperative whole kidney were obtained to calculate predicted postoperative whole kidney volume and then compared to actual postoperative whole kidney volume. Mean differences between predicted and actual postoperative whole kidney volumes were 19.2 cm3 (SD=20.2) and 32 cm3 (SD=16.1, P = .0074) for IRIS and non-IRIS groups, respectively. The mean improvement in precision for the IRIS procedure was 12.8 cm3 (95% confidence interval, 2.5 to Inf; P = .02). There was no significant change in mean glomerular filtration rate from baseline to 6 months postoperatively between IRIS and non-IRIS groups (-6.39, SD=15.8 vs -9.54, SD=13.3; P = .5). No significant differences in complication rates (0 vs 1, P = .2), worsening glomerular filtration rate staging (5 vs 4, P = 1), and >25% decrease in glomerular filtration rate (3 vs 4, P = 1) were found between IRIS and non-IRIS groups. We demonstrated that using IRIS intraoperatively when performing partial nephrectomy on complex tumors is associated with improved surgical precision.

Visualization of the complex double-outlet right ventricle anatomy using real-time three-dimensional computer graphics

Visualization of the complex double-outlet right ventricle anatomy using real-time three-dimensional computer graphics

The current landscape of pediatric living donor liver transplantation in the United States: Benefits, challenges, and future directions.

The current landscape of pediatric living donor liver transplantation in the United States: Benefits, challenges, and future directions.