Anatomical Details Research Articles

Value of magnetic resonance angiography before prostatic artery embolization for intervention planning

Knowledge about anatomical details seems to facilitate the procedure and planning of prostatic artery embolization (PAE) in patients with symptomatic benign prostatic hyperplasia (BPS). The aim of our study was the pre-interventional visualization of the prostatic artery (PA) with MRA and the correlation of iliac elongation and bifurcation angles with technical success of PAE and technical parameters. MRA data of patients with PAE were analysed retrospectively regarding PA visibility, PA type, vessel elongation, and defined angles were correlated with intervention time, fluoroscopy time, dose area product (DAP), cumulative air kerma (CAK), contrast media (CM) dose and technical success of embolization. T-test, ANOVA, Pearson correlation, and Kruskal–Wallis test was applied for statistical analysis. Between April 2018 and March 2021, a total of 78 patients were included. MRA identified the PA origin in 126 of 147 cases (accuracy 86%). Vessel elongation affected time for catheterization of right PA (p = 0.02), fluoroscopy time (p = 0.05), and CM dose (p = 0.02) significantly. Moderate correlation was observed for iliac bifurcation angles with DAP (r = 0.30 left; r = 0.34 right; p = 0.01) and CAK (r = 0.32 left; r = 0.36 right; p = 0.01) on both sides. Comparing the first half and second half of patients, median intervention time (125 vs. 105 min.) and number of iliac CBCT could be reduced (p < 0.001). We conclude that MRA could depict exact pelvic artery configuration, identify PA origin, and might obviate iliac CBCT. Vessel elongation of pelvic arteries increased intervention time and contrast media dose while the PA origin had no significant influence on intervention time and/or technical success.

Advancements In Multi-Modality Medical Image Fusion: A Comprehensive Review

Multimodality medical image fusion involves the amalgamation of multiple images acquired through single or multiple imaging modalities. The purpose of medical image fusion methods is to enhance the quality of medical images by effectively capturing the key features within the fused output. This consequently enhances the practicality of medical images for diagnostic assessment and issue identification. Medical imaging modalities like magnetic resonance imaging (MRI), computed tomography (CT), and positron emission tomography (PET) have been developed and are extensively utilized for clinical diagnoses. These multimodality images harbor vital information crucial for precise and efficient diagnosis of brain ailments. As a result, amalgamating diverse image modalities in the medical domain to create a distinct image brimming with intricate anatomical details and heightened spectral information has become exceedingly valuable in clinical diagnosis. This manuscript offers an exhaustive examination of existing literature on image fusion, elucidating the fundamental concepts and materials essential for a comprehensive grasp of diverse medical fusion techniques.

Assessment of Mental Foramen Characteristics in Syrian Population Using Cone Beam Computed Tomography: A Pilot Study.

Background Knowledge of the mental foramen (MF) characteristics is crucial for avoiding iatrogenic injuries during dental implant placement, root canal treatment, orthognathic surgery, and other dental and surgical interventions. Cone beam computed tomography (CBCT) offers a valuable tool for evaluating the MF characteristics with its precise anatomical details. The current study investigates the horizontal and vertical position variations in addition to the exit angle of MF within the Syrian adult population. Materials and methods The sample included CBCT scans of 42 subjects with an equal number of males and females (21 males, 21 females), with no underlying pathology in the investigated region, mean age was 24.7 years (SD: 7.2 years). CBCT scans were retrospectively analyzed in terms of the vertical, horizontal, and exit angle direction of MF. The chi-square test was conducted to investigate statistical differences in terms of MF horizontal and vertical positions. A T-test was conducted to investigate statistical differences in terms of exit angle direction. Comparisons were conducted between males and females groups, and between the left and right sides in the total sample group. Results The most frequent horizontal position was position 3 (MF between the first and second premolars) on the right side (n=20, 47.61%), and on the left side (n=21, 50%). The most frequent vertical position was position 3 (MF below the apices of the premolars) on the right side (n=29, 69.04%), and on the left side (n=27, 64.28%).The exit angle of the MF was in a backward direction, with a mean value of 118.42° (SD: 6.45 degrees), and 115.97° (SD: 7.29 degrees) on the right and left side, respectively. Statistically significant differences were found in terms of the right vertical position between males and females (P value < 0.05). Conclusion Variations in MF characteristics exist in the Syrian population. Statistically significant differences were found in the right vertical position of MF. The current study findings necessitate precise preoperative three-dimensional imaging for dental interventions among this population. By establishing normative values for the Syrian population, the results can contribute to improved surgical planning and patient care, and can be used for comparative studies for more understanding of the human anatomical variations.

Guided and Prosthetically Driven Bone Augmentation Using the Shell Technique and Allogeneic Cortical Plate: A Prospective Case Series.

To describe the use of digital technology to surgically guide the shell technique using allogenic cortical plates for a fully guided bone augmentation procedure. A total of 10 patients who required bone augmentation for implant placement were included in this study. Allogenic cortical plates were planned using CAD/CAM to have identical thickness to the original cortical plates, then were digitally positioned and shaped to outline the bone defect according to the existing anatomical details. A cutting pattern and a surgical template were manufactured according to the digitally preplanned bone graft and the intraoral setting. A total of 12 horizontal bone grafting procedures were performed using the shell technique with allogenic cortical plates. All grafting procedures were deemed successful and allowed for ideal 3D implant positioning. Of the 12 bone grafting procedures, which used a surgical template to position the cortical plate, 3 required an adjustment to reposition the plate to a more ideal position. Digital technology was used to create a surgical template to guide the shell bone grafting technique with allogenic cortical plates. All surgical templates offered a fixed support to hold the cortical allogenic plate in the preplanned position, offering a predictable, simplified, and accurate guided bone grafting procedure. Further studies on a larger population of patients are necessary to assess those results and to verify the treatment approach described in this study.

Anatomic, Image-based Classification of Diseased Lumbar Spinal Motion-Segment-Preliminary Clinical Report

Background: Multiple minimally invasive spine approaches and techniques have been developed in recent years. While the disease processes affecting the spinal motion-segment (SMS) have remained largely the same, surgical treatment options have changed radically and not necessarily in an organized fashion. This is inevitable given the rapid evolution of the technology. The current image-based diagnostic techniques, also evolving, have helped us appreciate the disease Patho anatomy in minute detail. A comprehensive classification method accounting for all anatomical participants in the spinal motion-segment pathology, tailored to treatment options, is necessary. Out of the many valid options, a spine surgeon should be able to choose a single surgical approach that is most appropriate for the Patho anatomy of his/her patient’s disease. We feel that our classification system will help the spine surgeon make that important decision consistently, with minimal risk of leaving behind a significant lesion, or disrupting a structure which is not a participant in the disease process. Furthermore, universal acceptance of this classification system will make it easier for spine surgeons to communicate with each other and meaningfully compare the results of the various surgical approaches. Purpose of the Study: To develop a comprehensive, treatment-orientated classification of lumbar spinal motion-segment disease. Materials and Methods: Contributors to spinal motion-segment disease - intervertebral disc, facet joint, ligamentum flavum and mal-alignment were identified. The degrees of abnormalities in each of these entities were coded, and the codes were entered in a table from which the possible combinations of pathologic processes were generated. Study of 57 lumbar MRI images (217 spinal motion-segments) was carried out to determine the prevalence of various combinations of the motion-segment disease. Pre- and post-operative MRI-based spinal motion-segment classifications were performed to evaluate the clinical application of this classification system in 15 patients. Results: This classification presents 494 possible combinations of the spinal motion-segment disease. Many of the combinations are only theoretical possibilities without clinical significance. Normal motion-segments, D0 A0 L0 F0 , represented 33.3% of the total motion-segments; D1 A0 L0 F0 was 8.8%, representing bulging disc, normal alignment, ligamentum flavum and facet joint. D2 A0 L0 F2 was 6.9% representing intraannular disc herniation, normal alignment, mildly thickened ligamentum flavum, and hypertrophied superior articular process of the facet joint. 6.4% was D1 A0 L1 F3 representing bulging disc, mildly hypertrophic ligamentum and hypertrophied facet joint. Clinical application of the classification revealed: Accurate anatomic classification; immediate post-operative classification changes which correlate with patient’s symptoms; pre-operative, immediate post-operative and late post-operative classifications which correlate with patient’s symptoms and accurately demonstrate post-operative remodeling of the motion-segment, especially after disc surgery, and accurate; and anatomic documentation of pre- and post op classifications of interlaminar endoscopic decompression. Conclusion: A treatment-orientated, standardized classification of spinal motion-segment disease is necessary considering current multiple treatment options and availability of sophisticated pre-operative imaging techniques. Such a classification will allow standardization of treatment options for various combinations of the pathological processes. With the emergence of new technologies surgical options can be upgraded based on a standardized classification. This in turn will help minimize confusion for those who want to learn and facilitate growth in the minimally invasive technology. The preliminary results of clinical application of the classification showed it to be a very accurate patho-anatomic representation; immediate post-operative classification change reflected clinical improvement post-operatively; and precise representation of post-operative remodeling of the motion-segment one to two years post-operatively. The precision of this classification allows accurate communication regarding the pathology, between providers across the globe, and more accurate comparison of results of different surgical interventions.

갑상선 CT에서 스캔 파라메터 변화에 따른 선속 경화 현상 저감에 관한 연구

The beam hardening artifact arising from complex shoulder structures in thyroid CT makes it difficult to capture anatomical fine details. Thus, the purpose of our study was to know appropriate scan parameters to reduce artifacts without significantly increasing the radiation dose. We utilized the GE Revolution APEX equipment for this study. We conducted the thyroid CT examinations by varying the thickness to 0.625 mm, 1.25 mm, and 2.5 mm, and adjusting the maximum mA to 300 mA, 600 mA, and 900 mA while applying auto exposure control system. The radiation dose was measured using a glass dosimeter placed at the thyroid location of the RANDO phantom. We measured signal to noise ratio (SNR) and contrast to noise ratio (CNR) of the experimental images to analyze the image quality of the thyroid area. As the slice thickness increases, the experimental dose also increases. The same pattern was observed for the maximum tube current. In terms of SNR, there is no difference between a slice thickness of 0.625 mm and 1.25 mm. However, there is a difference between measurements of 0.625 mm and 2.5 mm, and the same for 1.25 mm and 2.5 mm. No difference was observed in terms of tube current variations. The analysis of CNR reveals that there is not a significant difference as slice thickness and maximum tube current change. To improve quality of the images in complex shoulder structures, adjusting the scan parameters of thyroid CT affects not only SNR but also patient's radiation dose. Analyzing image quality through SNR showed that increasing the slice thickness improved the image quality. However, We should carefully use changes in parameters because the increase in slice thickness also involves an increase in radiation dose.

Radiologic Evaluation of Uncinate Processes of the Cervical Spine and the Relationship Between the Uncinate Process and Vertebral Artery: Implication in Anterior Cervical Spine Surgery

To determine the relationship between the uncinate process (UP) and vertebral artery (VA) from a radiologic view and to confirm the surgical safety margin to minimize the risk of VA injury during anterior cervical approaches. We retrospectively reviewed computed tomography angiography of 205 patients by using a contrast-enhanced computed tomography angiography protocol of the VA. Four kinds of images were simultaneously reconstructed to measure all the parameters associated with VA and UP of cervical spine. The shortest distance from the UP's tip to the VA's medial border (P < 0.001) was at the C-6 level (2.9 ± 0.9 mm on the left and 3.2 ± 1.3 mm on the right), and the longest distance (P < 0.001) was at the C-3 level on both sides. The distance between UP's tip and the medial border of the ipsilateral VA was statistically significantly different at each cervical level, and the right distance was larger than the left (P < 0.05). We found the height of UP gradually increased from C-3 to C5-level and then decreased from C-5 to C-7 level for both sides. The mean distance between the medial borders of left UP and left VA was on average 7.5 ± 1.4 mm. The diameter of VA was on average 3.4 ± 0.6 mm on the left side and 3.2 ± 0.7 mm on the right. The diameter of the VA was statistically significantly different on both sides, and the left side was larger than the right (P < 0.05). Detailed radiologic anatomy of VA and UP was reviewed in this study. A deep understanding of the correlation between the UP and VA is essential to perform anterior cervical spine surgery safely and ensure adequate spinal canal decompression.

Summary of a decade of research at the Owadów–Brzezinki Lagerstätte (Tithonian, central Poland): A review and perspectives for the future

For over ten years, the Lower to Upper Tithonian boundary beds cropping out in the Owadów–Brzezinki quarry have yielded numerous fossils of ammonites, bivalves, brachiopods, xiphosurans, decapods, insects, and vertebrates – including actinopterygian fishes and various reptiles and others, all of which exhibit fine preservation of their anatomical details due to special environmental conditions during their fossilization. The Owadów–Brzezinki section is also important for stratigraphical correlations because it contains ammonite faunas indicative of the NE European and NW European Subboreal zonal schemes, as well as Tethyan calpionellids. The whole faunal as-semblage, which represents taxa of many iconic groups of Mesozoic animals, has created the opportunity to establish the ‘Owadów–Brzezinki geopark’, a geoeducation area where the public, and especially the young, can learn about the beauty of the natural history of the region.

Exploring the Influence of Arbuscular Mycorrhizal Symbology on the Antioxidant Potential of Liverwort Asterella multiflora: A Comprehensive Study on Rhizoid and Thallus Anatomy

Arbuscular mycorrhizal (AM) symbiosis is a vital ecological interaction between plants and fungi that enhances nutrient uptake and plant resilience. While extensively studied in vascular plants, AM symbiosis in liverworts remains relatively unexplored. Six populations of Asterella multiflora were collected throughout the year to scan for arbuscular mycorrhizal colonization and enzymatic antioxidant activity. Percent mycorrhizal colonization was measured in smooth as well as tuberculated rhizoids. Anatomical detail of the thallus was also observed. Arbuscules were observed in the cells of the storage zone of the thallus. Enzymatic antioxidant activities, i.e., superoxide dismutase (SOD), guaiacol peroxidase (GPOX), catalase (CAT), ascorbate peroxidase activity (APOX) and glutathione reductase activity (GR) were calculated. Maximum enzyme activity was observed in ascorbate peroxidase, which calculated 1.92-2.09 UA/mg protein, while catalase showed minimum activity of 0.01 UA/mg protein. A positive correlation was observed between enzyme activities and percent mycorrhizal colonization. This study delves into AM symbiosis in liverworts, focusing on Asterella multiflora and investigates the impact of AM colonization on enzymatic antioxidant activities, i.e., superoxide dismutase (SOD), guaiacol peroxidase (GPOX), catalase (CAT) ascorbate peroxidase activity (APOX) and glutathione reductase activity (GR). Antioxidants play a crucial role in stress tolerance and plant health, making them central to understanding the implications of symbiotic relationships.

PharmaMemory: an interactive, animated web application for learning autonomic physiology and pharmacology.

Medical students face challenging but important topics they must learn in short periods of time, such as autonomic pharmacology. Autonomic pharmacology is difficult in that it requires students to synthesize detailed anatomy, physiology, clinical reasoning, and pharmacology. The subject poses a challenge to learn as it is often introduced early in medical school curricula. To ease the difficulty of learning autonomic pharmacology, we created a free web application, PharmaMemory (www.pharmamemory.com), that interactively depicts the effects of high-yield autonomic drugs on the human body. PharmaMemory provides users with the opportunity to read and quiz themselves on the mechanisms, side effects, indications, and contraindications of these drugs while interacting with the application. We provided PharmaMemory to first-year medical students for three consecutive years of quality improvement and assessed the application's perceived effects on learning via user surveys. Survey feedback showed that users viewed PharmaMemory favorably and self-reported increased knowledge and confidence in the subject of autonomic pharmacology. Comments revealed that users liked the website's visuals, opportunity for challenged recall, and conciseness. PharmaMemory utilizes challenged recall, visual stimulation, and interactive learning to provide users with a multifaceted learning tool. Preliminary data suggest that students find this method of learning beneficial. Further studies are needed to assess PharmaMemory compared with more traditional learning methods such as PowerPoint or text-based learning. Additionally, further research is needed to quantitatively assess reduction in cognitive load.NEW & NOTEWORTHY PharmaMemory (www.pharmamemory.com) is a free web application that interactively depicts the effects of high-yield autonomic drugs on the human body.

An MR-based brain template and atlas for optical projection tomography and light sheet fluorescence microscopy in neuroscience.

Optical Projection Tomography (OPT) and light sheet fluorescence microscopy (LSFM) are high resolution optical imaging techniques, ideally suited for ex vivo 3D whole mouse brain imaging. Although they exhibit high specificity for their targets, the anatomical detail provided by tissue autofluorescence remains limited. T1-weighted images were acquired from 19 BABB or DBE cleared brains to create an MR template using serial longitudinal registration. Afterwards, fluorescent OPT and LSFM images were coregistered/normalized to the MR template to create fusion images. Volumetric calculations revealed a significant difference between BABB and DBE cleared brains, leading to develop two optimized templates, with associated tissue priors and brain atlas, for BABB (OCUM) and DBE (iOCUM). By creating fusion images, we identified virus infected brain regions, mapped dopamine transporter and translocator protein expression, and traced innervation from the eye along the optic tract to the thalamus and superior colliculus using cholera toxin B. Fusion images allowed for precise anatomical identification of fluorescent signal in the detailed anatomical context provided by MR. The possibility to anatomically map fluorescent signals on magnetic resonance (MR) images, widely used in clinical and preclinical neuroscience, would greatly benefit applications of optical imaging of mouse brain. These specific MR templates for cleared brains enable a broad range of neuroscientific applications integrating 3D optical brain imaging.

PETformer network enables ultra-low-dose total-body PET imaging without structural prior

Objective. Positron emission tomography (PET) is essential for non-invasive imaging of metabolic processes in healthcare applications. However, the use of radiolabeled tracers exposes patients to ionizing radiation, raising concerns about carcinogenic potential, and warranting efforts to minimize doses without sacrificing diagnostic quality. Approach. In this work, we present a novel neural network architecture, PETformer, designed for denoising ultra-low-dose PET images without requiring structural priors such as computed tomography (CT) or magnetic resonance imaging. The architecture utilizes a U-net backbone, synergistically combining multi-headed transposed attention blocks with kernel-basis attention and channel attention mechanisms for both short- and long-range dependencies and enhanced feature extraction. PETformer is trained and validated on a dataset of 317 patients imaged on a total-body uEXPLORER PET/CT scanner. Main results. Quantitative evaluations using structural similarity index measure and liver signal-to-noise ratio showed PETformer’s significant superiority over other established denoising algorithms across different dose-reduction factors. Significance. Its ability to identify and recover intrinsic anatomical details from background noise with dose reductions as low as 2% and its capacity in maintaining high target-to-background ratios while preserving the integrity of uptake values of small lesions enables PET-only fast and accurate disease diagnosis. Furthermore, PETformer exhibits computational efficiency with only 37 M trainable parameters, making it well-suited for commercial integration.

A splinter of charred oleaceous wood from late early Eocene volcanoclastic deposits of Germany

Summary A splinter of charred wood was recovered from late Early Eocene volcanoclastic deposits underlying the lacustrine succession of the Messel-pit near Darmstadt (Hesse, Germany). Well-preserved anatomical details due to charring allow for an attribution of the splinter to the Oleaceae family. Within Oleaceae, the wood shows good agreement with the anatomical structure of recent members of the genera Olea, Chionanthus and Noronhia. However, due to the high variability of structural features within this group of genera, a reliable taxonomic placement is restricted to the monophyletic drupaceous subtribe Oleinae. The Splinter was cut loose from a tree of the local vegetation and charred by effects of the respective phreatomagmatic eruption, even under a low-fire regime. The specimen represents a rare example of a Pre-Quarternary wood that can be related directly to a radiometric age of 48.27–48.11 Ma (±0.22 Ma).

The Detailed Anatomy of the Deep Plane of the Face and Neck with Current Nomenclature.

The fundamental goal of modern face and neck lifting is to enhance and restore a more youthful facial appearance by addressing soft tissue descent. There are variations in described facelift technique including superficial musculoaponeurotic system (SMAS) flaps, composite flaps, deep plane, skin flaps, and subperiosteal facelifts, among others. The term "deep plane rhytidectomy" was originally described by Hamra. This term has since been linked with facelift surgery with recent advances including incision placement, treatments of SMAS-platysma complex, and mastoid crevasse among others. In the lead authors' experience, using deep plane techniques have demonstrated superior facial surgical rejuvenation results with less dependence on ancillary measures such as fat grafting or implantation for midface volumization. In order to successfully perform any face or neck lift, it is key to understand the relationship of the skin, the fat compartments, and the ligamentous attachments. This chapter details the anatomy of the deep plane of the face and neck and explains some nuances as it relates to surgical lifting. We also describe recent anatomical revelations of the mandibular ligament and its management in deep plane face lifting. In this chapter, given this opportunity to share personal experiences and preferences, the authors hope to describe relevant anatomy for the deep plane and provide some clarity on the merits of deep plane face and neck lift technique.

Visualizing features with wide-field volumetric OCT angiography.

Optical coherence tomography (OCT) and its extension OCT angiography (OCTA) have become essential clinical imaging modalities due to their ability to provide depth-resolved angiographic and tissue structural information non-invasively and at high resolution. Within a field of view, the anatomic detail available is sufficient to identify several structural and vascular pathologies that are clinically relevant for multiple prevalent blinding diseases, including age-related macular degeneration (AMD), diabetic retinopathy (DR), and vein occlusions. The main limitation in contemporary OCT devices is that this field of view is limited due to a fundamental trade-off between system resolution/sensitivity, sampling density, and imaging window dimensions. Here, we describe a swept-source OCT device that can capture up to a 12 × 23-mm field of view in a single shot and show that it can identify conventional pathologic features such as non-perfusion areas outside of conventional fields of view. We also show that our approach maintains sensitivity sufficient to visualize novel features, including choriocapillaris morphology beneath the macula and macrophage-like cells at the inner limiting membrane, both of which may have implications for disease.

Ventricular tachycardia ablation after myocardial infarction guided by cardiac magnetic resonance/multidetector computed tomography image integration

Abstract INTRODUCTION The persistent challenge of ventricular tachycardia (VT) ablation lies in the elevated morbidity and mortality due to the underlying disease progression and the complexity of the arrhythmogenic substrate. As imaging methods are evolving, substrate-based VT ablation is moving closer to the realm of precision medicine. CASE PRESENTATION A 52-year-old patient with a history of hypertension, type II diabetes mellitus, hyperlipidemia, and stage IIIB chronic kidney disease was referred to our hospital for sustained monomorphic VT. Upon admission, the patient was hemodynamically stable. Laboratory results indicated mild anemia, moderate renal dysfunction, and normal myocardial enzymes. ECG during sinus rhythm showed widespread repolarization abnormalities in the apical and postero-lateral leads. Echocardiography revealed mild left ventricular dysfunction and coronary angiography confirmed significant lesions in multiple coronary arteries that were treated with drug-eluting stents (DES). Cardiac MRI showed relatively limited areas of old myocardial infarctions in the left circumflex artery and left anterior descending artery territories, therefore we decided to perform VT ablation. We used a Carto 3 Biosense Webster electro-anatomical mapping system (EAM) guided by fusion imaging (cardiac MRI and multidetector computed tomography - MDCT) with the aid of ADAS 3D software. The voltage map created during sinus rhythm, was concordant with the lesions identified on LGE-CMR. Radiofrequency (RF) catheter ablation targeted abnormal signals from the EAM, which were identified based on conduction channels (CCs) from the fusion imaging. There was complete VT non-inducibility at programmed ventricular stimulation (PVS). At the 3-month follow-up, echocardiography showed a slight improvement in LVEF and repeated PVS proved persistent ventricular arrhythmia non-inducibility. CONCLUSION Substrate-based VT ablation in structural heart disease has greatly improved by high-resolution substrate imaging with detailed anatomy, allowing successful personalized treatment. There is room for further improvement in the near future with the contribution of artificial intelligence, possibly with a more targeted and automated VT ablation.

Universal Fetal Echocardiography for Pregestational Diabetes Mellitus: A Cost-Effectiveness Analysis.

To evaluate the cost effectiveness of universal fetal echocardiogram for patients with pregestational diabetes mellitus by first-trimester hemoglobin A 1c (Hb A 1c ) level. We developed a cost-effectiveness model comparing two strategies of screening for critical fetal congenital heart disease among patients with diabetes: universal fetal echocardiogram and fetal echocardiogram only after abnormal findings on detailed anatomy ultrasonogram. We excluded ventricular septal defect, atrial septal defects, and bicuspid aortic valve from the definition of critical fetal congenital heart disease. Probabilities and costs were derived from the literature. We used individual models to evaluate different scenarios: first-trimester Hb A 1c lower than 6.5%, Hb A 1c 6.5-9.0%, and Hb A 1c higher than 9.0%. Primary outcomes included fetal death, neonatal death, and false-positive and false-negative results. A cost-effectiveness threshold was set at $100,000 per quality-adjusted life-year. Univariable sensitivity analyses were performed to investigate the drivers of the model. Universal fetal echocardiogram is not cost effective except for when first-trimester Hb A 1c level is higher than 9.0% (incremental cost-effectiveness ratio $638,100, $223,693, and $67,697 for Hb A 1c lower than 6.5%, 6.5-9.0%, and higher than 9.0%, respectively). The models are sensitive to changes in the probability of congenital heart disease at a given Hb A 1c level, as well as the cost of neonatal transfer to a higher level of care. Universal fetal echocardiogram became both cost saving and more effective when the probability of congenital heart disease reached 14.48% (15.4 times the baseline risk). In the Monte Carlo simulation, universal fetal echocardiogram is cost effective in 22.7%, 48.6%, and 62.3% of scenarios for each of the three models, respectively. For pregnant patients with first-trimester Hb A 1c levels lower than 6.5%, universal fetal echocardiogram was not cost effective, whereas, for those with first-trimester Hb A 1c levels higher than 9.0%, universal fetal echocardiogram was cost effective. For those with intermediate Hb A 1c levels, universal fetal echocardiogram was cost effective in about 50% of cases; therefore, clinical judgment based on individual patient values, willingness to pay to detect congenital heart disease, and resource availability needs to be considered.

Days alive and out of hospital for children born with single-ventricle heart disease.

This study describes the illness burden in the first year of life for children with single-ventricle heart disease, using the metric of days alive and out of hospital to characterize morbidity and mortality. This is a retrospective single-centre study of single-ventricle patients born between 2005 and 2021 who had their initial operation performed at our institution. Patient demographics, anatomical details, and hospitalizations were extracted from our institutional single-ventricle database. Days alive and out of hospital were calculated by subtracting the number of days hospitalized from number of days alive during the first year of life. A multivariable linear regression with stepwise variable selection was used to determine independent risk factors associated with fewer days alive and out of hospital. In total, 437 patients were included. Overall median number of days alive and out of hospital in the first year of life for single-ventricle patients was 278 days (interquartile range 157-319 days). In a multivariable analysis, low birth weight (<2.5kg) (b = -37.55, p = 0.01), presence of a dominant right ventricle (b = -31.05, p = 0.01), moderate-severe dominant atrioventricular valve regurgitation at birth (b = -37.65, p <0.05), index hybrid Norwood operation (b = -138.73, p < 0.01), or index heart transplant (b = -158.41, p < 0.01) were all independently associated with fewer days alive and out of hospital. Children with single-ventricle heart defects have significant illness burden in the first year of life. Identifying risk factors associated with fewer days alive and out of hospital may aid in counselling families regarding expectations and patient prognosis.

Evolutionary novelties underlie sound production in baleen whales.

Baleen whales (mysticetes) use vocalizations to mediate their complex social and reproductive behaviours in vast, opaque marine environments1. Adapting to an obligate aquatic lifestyle demanded fundamental physiological changes to efficiently produce sound, including laryngeal specializations2-4. Whereas toothed whales (odontocetes) evolved a nasal vocal organ5, mysticetes have been thought to use the larynx for sound production1,6-8. However, there has been no direct demonstration that the mysticete larynx can phonate, or if it does, how it produces the great diversity of mysticete sounds9. Here we combine experiments on the excised larynx of three mysticete species with detailed anatomy and computational models to show that mysticetes evolved unique laryngeal structures for sound production. These structures allow some of the largest animals that ever lived to efficiently produce frequency-modulated, low-frequency calls. Furthermore, we show that this phonation mechanism is likely to be ancestral to all mysticetes and shares its fundamental physical basis with most terrestrial mammals, including humans10, birds11, and their closest relatives, odontocetes5. However, these laryngeal structures set insurmountable physiological limits to the frequency range and depth of their vocalizations, preventing them from escaping anthropogenic vessel noise12,13 and communicating at great depths14, thereby greatly reducing their active communication range.

Subject-Specific Geometry of FE Lumbar Spine Models for the Replication of Fracture Locations Using Dynamic Drop Tests.

For traumatic lumbar spine injuries, the mechanisms and influence of anthropometrical variation are not yet fully understood under dynamic loading. Our objective was to evaluate whether geometrically subject-specific explicit finite element (FE) lumbar spine models based on state-of-the-art clinical CT data combined with general material properties from the literature could replicate the experimental responses and the fracture locations via a dynamic drop tower-test setup. The experimental CT datasets from a dynamic drop tower-test setup were used to create anatomical details of four lumbar spine models (T12 to L5). The soft tissues from THUMS v4.1 were integrated by morphing. Each model was simulated with the corresponding loading and boundary conditions from the dynamic lumbar spine tests that produced differing injuries and injury locations. The simulations resulted in force, moment, and kinematic responses that effectively matched the experimental data. The pressure distribution within the models was used to compare the fracture occurrence and location. The spinal levels that sustained vertebral body fracture in the experiment showed higher simulation pressure values in the anterior elements than those in the levels that did not fracture in the reference experiments. Similarly, the spinal levels that sustained posterior element fracture in the experiments showed higher simulation pressure values in the vertebral posterior structures compared to those in the levels that did not sustain fracture. Our study showed that the incorporation of the spinal geometry and orientation could be used to replicate the fracture type and location under dynamic loading. Our results provided an understanding of the lumbar injury mechanisms and knowledge on the load thresholds that could be used for injury prediction with explicit FE lumbar spine models.