Analysis Of Ultra-wideband Antenna Research Articles

Design and analysis of UWB antenna with quintuple band-notched and wide-band rejection characteristics

AbstractIn this study, a compact ultra-wideband (UWB) antenna with quintuple band-notched and wide-band rejection characteristics is studied. The proposed antenna mainly consists of a rectangular radiating patch, a microstrip feeding line, and a modified rectangular ground plane. The quintuple band-notched functions with narrow stop bands are achieved at WiMAX (3.3–3.7 GHz), WLAN (5.15–5.35 GHz and 5.725–5.825 GHz), C-band IEEE INSAT/super-extended (6.7–7.1 GHz) by using three modified inverted U-shaped slots and two symmetrical rectangular slots on the radiating path. Each stop band formed in the UWB antenna can be adjusted independently, and deep reflection zeros are formed between the adjacent stop bands. The formation of reflection zeros improves the band-edge selectivity of the stop band, and the notch characteristics are more prominent. To further study the wide stop band (C-band and X-band) with good selectivity characteristics, a pair of L-shaped open slot is added to the edges of two rectangular slots. Additionally, a pair of modified Rho-shaped resonators is located near the feeding line to realize band-notched characteristic at ITU service bands (8.025–8.4 GHz), thus a quintuple band-notched UWB antenna is achieved. The shape factor (ratio of the −3 dB bandwidth to the −10 dB bandwidth) of the wide stop band is 0.56, which indicates that the antenna has excellent band-edge selectivity. To verify the performance of the proposed design, both the time-domain and the frequency-domain characteristics of the antenna have been studied and analyzed. The simulated and measured results verify the design as a good candidate for various portable UWB applications.

Design and analysis of ultra-wideband antennas for transient field excitations

Abstract. This work addresses the design of two ultra-wideband antennas for the application of transient field measurements that are characterized by frequency spectra that typically range from a few MHz to several GHz. The motivation for their design is the excitation of high power transient pulses, such as double exponential or damped sinusoidal pulses, within highly resonant metallic enclosures. The antenna design is based on two independent numerical full-wave solvers and it is aimed to achieve a low return loss over a wide range of frequencies together with a high pulse fidelity. It turns out that antennas of the conical and discone type do achieve satisfactory broadband characteristics while limitations towards low frequencies persist. Also the concept of fidelity factor turns out as advantageous to determine whether the proposed antennas allow transmitting certain broadband pulse forms.

Design and Analysis of Ultra-Wideband Antenna with Triple Band-Notched Characteristic

A compact coplanar waveguide fed UWB (ultra-wideband) antenna with triple band-notched characteristics is presented. The rectangle radiation patch is used in the new design, and the bandwidth of the UWB antenna is extended by using circle corner for the rectangle cut from the ground. A parasitic element is added, whereas an inverted U-shaped slot is cut on the top of the CPW ground plane and a U-shaped slot is cut on the rectangle radiation patch. As a result, a triple band-notched characteristic is obtained, by which the potential interference between UWB and WLAN (Wireless Local Area Networks), C-band and X-band systems can be effectively reduced.