Resonance Analysis Research Articles

Potent efficacy of an IgG-specific endoglycosidase against IgG-mediated pathologies.

Endo-β-N-acetylglucosaminidases (ENGases) that specifically hydrolyze the Asn297-linked glycan on immunoglobulin G (IgG) antibodies, the major molecular determinant of fragment crystallizable (Fc) γ receptor (FcγR) binding, are exceedingly rare. All previously characterized IgG-specific ENGases are multi-domain proteins secreted as an immune evasion strategy by Streptococcus pyogenes strains. Here, using in silico analysis and mass spectrometry techniques, we identified a family of single-domain ENGases secreted by pathogenic corynebacterial species that exhibit strict specificity for IgG antibodies. By X-ray crystallographic and surface plasmon resonance analyses, we found that the most catalytically efficient IgG-specific ENGase family member recognizes both protein and glycan components of IgG. Employing invivo models, we demonstrated the remarkable efficacy of this IgG-specific ENGase in mitigating numerous pathologies that rely on FcγR-mediated effector functions, including T and B lymphocyte depletion, autoimmune hemolytic anemia, and antibody-dependent enhancement of dengue disease, revealing its potential for treating and/or preventing a wide range of IgG-mediated diseases in humans.

Preparation and structural characteristics of polysaccharides from loquat peel waste, and their preliminary bioactivities.

Loquat peel, often as food waste, is a valuable source of bioactive polysaccharides. However, study of such polysaccharides is insufficient, leaving a significant gap in understanding their preparation, structure and bioactivities. In this study, three types of loquat peel polysaccharides (LPWP, LPHP and LPNP) were sequentially extracted using hot water, HCl and NaOH solutions, respectively. Among them, LPWP was the purest, with a yield of 3.4% and molecular weight of 470.6 kDa, and it differed from LPHP and LPNP in structure, as evidenced by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy, which demonstrated that LPWP consisted of more arabinose (Ara) but less galacturonic acid, rhamnose and galactose, with molar percentages of 71.3%, 23.3%, 3.5% and 1.9%, respectively. Besides, LPWP also exhibited superior antioxidant and antihyperglycemic activities in vitro, particularly in inhibiting α-amylase and α-glucosidase. Methylation and nuclear magnetic resonance analysis confirmed that LPWP was a methyl-esterified pectic polysaccharide rich in branched arabinan, as evidenced by the notable proportion of α-Ara residues, including T-α-Araf, 1,5-α-Araf and 1,2,3,5-α-Araf, with molar percentages of 27.1%, 23.1% and 10.2%, respectively. AFM imaging further revealed its branched-chain morphology and aggregation behavior. This study highlights the potential of loquat peel polysaccharides as a bioactive ingredient with significant antioxidant and antihyperglycemic properties, particularly LPWP, which was found as a methyl-esterified pectic polysaccharide with abundant-branched arabinan. Our work provides valuable insights into the application of loquat peel polysaccharides in functional foods. © 2024 Society of Chemical Industry.

Functional resonance analysis method for emerging risks in hydrogen handling: An analysis of an experimental test

Functional resonance analysis method for emerging risks in hydrogen handling: An analysis of an experimental test

Comparing Guidelines to Daily Practice When Screening Older Patients for the Risk of Functional Decline in Hospitals: Outcomes of a Functional Resonance Analysis Method (FRAM) Study.

Dutch hospitals are required to screen older patients for functional decline using 4 indicators: malnutrition, delirium, physical impairment, and falls, to recognize frail older patients promptly. The Functional Resonance Analysis Method was employed to deepen the understanding of work according to the protocols (work-as-imagined [WAI]) in contrast to the realities of daily practice (work-as-done [WAD]). Data have been collected from 3 hospitals (2 tertiary and 1 general) and 4 different wards: an internal medicine ward, surgical ward, neurology ward, and a trauma geriatric ward. WAI models were based on national guidelines and hospital protocols. Data on WAD were collected through semistructured interviews with involved nurses (n = 30). Hospital protocols were more extensive than national guidelines for all screening indicators. Additional activities mainly comprised specific preventive interventions or follow-up assessments after adequate measurements. Key barriers identified to work according to protocols included time constraints, ambiguity regarding task ownership, nurses' perceived limitations in applying their clinical expertise due to time constraints, insufficient understanding of freedom-restricted interventions, and the inadequacy of the Delirium Observation Scale Score in patients with neurological and cognitive problems. Performance variability stemmed from timing issues, frequently attributable to time constraints. The most common reasons for deviating from the protocol are related to time constraints, lack of knowledge, and/or patient-related factors. Also, collaboration among relevant disciplines appears important to ensure good health outcomes. Future research endeavors could shed a light on the follow-up procedures of the screening process and roles of other disciplines, such as physiotherapists.

Strong enhancement on diclofenac degradation in Cu(II)/H2O2 system by adding ascorbic acid: Efficiency, mechanism and influencing factors

Utilization of trace Cu(II) (at μM level) inherently existing in wastewater to activate hydrogen peroxide (H2O2) has exhibited significant potential to remove aqueous organic contaminants. Nevertheless, the Cu(II)/H2O2 system was only efficient under alkaline conditions. Herein, ascorbic acid (H2A), an environmentally benign and natural reductant, was introduced to broaden pH range of Cu(II)/H2O2 process by expediting the Cu(II)/Cu(I) cycle. The H2A/Cu(II)/H2O2 system performed well in degrading diclofenac across a wide pH range from 4.0 to 9.0, and its kinetic rate constant of diclofenac elimination was 247 times greater than its counterpart without H2A at the optimal pH of 6.0, outperforming the performance of most previously reported reductant-enhanced Cu(II)/H2O2 system. Electron paramagnetic resonance analysis, periodate colorimetric method, and in situ Raman spectroscopy tests indicated that hydroxyl radical (HO), rather than Cu(III), was the dominant reactive species of diclofenac degradation. Thirteen degradation products of diclofenac were identified by LC-Q-TOF-MS, and five different elimination pathways were proposed. Furthermore, the presence of SO42− exerted an insignificant influence on diclofenac degradation, while the addition of Cl−, HCO3− and humic acid slightly suppressed the abatement of diclofenac. H2A/Cu(II)/H2O2 system was still highly efficient in degrading diclofenac in actual water matrix (i.e., reservoir water and lake water). Overall, this study provided an eco-friendly approach to enhance the oxidation capacity of the Cu(II)/H2O2 system over a wide pH range, which might be a potential technology for degrading refractory organic pollutants in water treatment.

Bridged Ethylene Polyethylene Oxide Surfaces to Improve Packing Materials for Widepore Size Exclusion Chromatography.

Here, we describe the preparation of bridged ethylene polyethylene oxide (BE-PEO) surface-modified silica packing materials for size exclusion chromatography. BE-PEO surface-modified silica was hydrolyzed and subsequent 1H nuclear magnetic resonance analysis of hydrolysis products confirmed the successful formation of BE-PEO bonded surface. Silica particles exhibiting 3µm diameters and 1000 Å nominal pore diameters were selected as a base material for this work out of the critical need to improve analytical capabilities for the testing of cell and gene therapy drug products. Accelerated high pH aging study revealed significant enhancement in column stability. Multi-angle light scattering noise measurements showed inordinately lower baseline noise. Moreover, we evaluated the chromatographic performance of BE-PEO silica-packed columns through separations of a protein test mixture, DNA ladder, monoclonal antibody-based therapeutics, and adeno-associated viruses. BE-PEO silica columns demonstrated high resolution, high recovery separations that were confirmed to be reproducible and capable of extended column lifetimes and exhibited low ionic and hydrophobic secondary interactions. In summary, BE-PEO silica particles have yielded a new level of performance, improved base stability, and inherently lower baseline noise. These novel widepore particles will facilitate more sensitive size-based detection and characterization of large biologics in the form of advanced gene therapy products.

Reservoir and rock characterization for Mishrif Formation/ Zubair Field (Rafdiya and Safwan Domes) by nuclear magnetic resonance and cores analysis

The identification studies of rock and reservoir characteristics are essential for evaluating the efficiency of a reservoir by analyzing the types of rock and pores. In this study, Nuclear Magnetic Resonance (NMR) for six wells was utilized to identify the rock and reservoir characteristics of the Mishrif formation in the South of the Zubair Field, specifically the Rafdyia and Safwan domes, as well as the west flank. Specific correlations were utilized to describe the classification of rocks, estimate pore throat radius, and recognize possible flow intervals. The results revealed that the Mishrif Formation mainly consists of limestone, dolomite, and shale. The Safwan dome consists mainly of pack-wackestone, wackestone, and mudstone, while the Rafdyia dome is a mixture of packstone, grainstone, and wackestone with some shoal and rudist bioherm facies. The west flank is characterized by pack-wackestone, wackestone, and mudstone. These results were further supported by core analysis. Pore throat types in the Safwan dome range from Micropores to Nanopores, while the Rafdyia dome is dominated by Megapores, Macropores, and Mesopores. The back-shoal facies overwhelm the packstone microfacies. The west flank of the Mishrif Formation in the Zubair Field is mesoporous and micropores. Flow units were identified in the Safwan and Rafdyia domes, as well as the west flank. The Safwan dome has fifteen flow units in the north and seven in the south, while the Rafdyia dome has ten flow units in both the north and south regions, with five flow units on the west flank of the Zubair Field.

Peroxymonosulfate Activation by Fe@N Co-Doped Biochar for the Degradation of Sulfamethoxazole: The Key Role of Pyrrolic N

In this study, Fe, N co-doped biochar (Fe@N co-doped BC) was synthesized by the carbonization–pyrolysis method and used as a carbocatalyst to activate peroxymonosulfate (PMS) for sulfamethoxazole (SMX) removal. In the Fe@N co-doped BC/PMS system, the degradation efficiency of SMX (10.0 mg·L−1) was 90.2% within 40 min under optimal conditions. Radical quenching experiments and electron spin resonance (ESR) analysis suggested that sulfate radicals (SO4•−), hydroxyl radicals (•OH), and singlet oxygen (1O2) participated in the degradation process. After the reaction, the proportion of pyrrolic N decreased from 57.9% to 27.1%. Pyrrolic N served as an active site to break the inert carbon network structure and promote the generation of reactive oxygen species (ROS). In addition, pyrrolic N showed a stronger interaction with PMS and significantly reduced the activation energy required for the reaction (∆G = 23.54 kcal/mol). The utilization potentiality of Fe@N co-doped BC was systematically evaluated in terms of its reusability and selectivity to organics. Finally, the intermediates of SMX were also detected.

CO2-Induced In-Situ Targeted Precipitation of Asphaltene in Heavy Oil Reservoirs: Balancing Formation Gas Channeling Regulation and Wellbore Asphaltene Blockage Prevention

Summary To investigate the mechanisms of the asphaltene precipitation in oil caused by CO2, the sandstone core oil displacement experiments and asphaltene structure observation experiments are designed in this work. The oil displacement experiments create CO2 flooding conditions under different pressures in heavy oil reservoirs and analyze the produced oil components and precipitated asphaltene proportions. Meanwhile, nuclear magnetic resonance (NMR) analysis is conducted on the sandstone cores to discuss the precipitation characteristics of asphaltene in the reservoir pores. The observation experiments analyze the microstructure of precipitated asphaltene after interactions between oil and CO2. The results show that the increasing pressure promotes the precipitation of asphaltene from oil by enhancing the dissolution and component extraction of CO2 in oil, which reduces oil viscosity and promotes reservoir development efficiency. This process also leads to an increase in CO2 sequestration in the reservoir. However, the precipitated asphaltene reduces reservoir permeability, hindering the optimization of the oil recovery rate. During the process of increasing pressure, the rate of increase in oil recovery decreases. In reservoirs containing oil with high asphaltene proportion, the oil recovery rate even decreases under high pressure. Additionally, in-situ targeted precipitation and retention of asphaltenes in large pores can reduce the distribution differences of pores with different sizes in the reservoir, weakening the above negative effects and enhancing oil recovery by regulating gas channeling. Moreover, the ratio of resin in oil affects the asphaltene precipitation form, and CO2 can promote the association of asphaltenes by weakening the steric stabilization effect of resin on asphaltene in oil, which makes the microstructure of precipitated asphaltenes dense and regular and promotes asphaltene precipitation and oil recovery increasing. This work aims to verify the advantages of CO2-induced asphaltene precipitation in improving the efficient and environmentally friendly development of heavy oil reservoirs, while exploring the significance of CO2 flooding in promoting carbon sequestration.

Antibiofilm mechanism of 2R,3R-dihydromyricetin by targeting sortase A and its application against Staphylococcus aureus adhesion on eggshell

Biofilm formation of Staphylococcus aureus in food processing environments raises significant safety concerns, necessitating the development of new antibiofilm approaches for controlling S. aureus contamination. This study aimed to elucidate the antibiofilm mechanism of 2R,3R-dihydromyricetin (DMY), a natural flavonoid, against S. aureus and evaluate its efficacy in reducing bacterial adhesion to eggshell. The results revealed that DMY was a potent inhibitor of S. aureus sortase A (SrtA) with an IC50 of 73.43 μM, preventing bacterial adhesion to fibrinogen and subsequent biofilm formation. Fluorescence quenching assay and surface plasmon resonance analysis confirmed that DMY could directly bind to S. aureus SrtA. Notably, circular dichroism spectra demonstrated a conformational change in SrtA from α-helical to β-sheet structure upon DMY binding. Molecular dynamics simulation suggested that DMY bound to the catalytic pocket of S. aureus SrtA via hydrophobic interactions and hydrogen bonds. Furthermore, fluorescence microscopic observations further revealed that DMY attenuated the biofilm-related phenotype of SrtA by decreasing the anchoring of S. aureus protein A (SpA) onto cell wall. Importantly, pretreatment with 125 μg/mL DMY significantly reduced 1.14–1.75 log CFU/cm2 of S. aureus adhered on eggshells. Overall, these findings highlight how specific targeting of SrtA by DMY inhibits the attachment stages of biofilm development in S. aureus, making it a promising candidate for a novel disinfectant against this pathogen in the food industry.

Oxidation of Polycyclic Aromatic Hydrocarbons (PAHs) Triggered by a Photochemical Synergistic Effect between High- and Low-Molecular-Weight PAHs.

Photooxidation of polycyclic aromatic hydrocarbons (PAHs), which are widely observed in atmospheric particulate matter (PM), largely determines their atmospheric fate. In the environment, PAHs are highly complex in chemical composition, and a great variety of PAHs tend to co-occur. Despite extensive investigation on the photochemical behavior of individual PAH molecules, the photochemical interaction among these coexisting PAHs is still not well understood. Here, we show that during photooxidation, there is a strong photochemical synergistic effect among PAHs extracted from soot particles. We find that neither small PAHs with low molecular weights of 200-350 Da and 4-8 aromatic rings (named PAHsmall) nor large PAHs with high molecular weights of 350-600 Da and 8-14 aromatic rings (named PAHlarge) undergo photooxidation under red-light irradiation (λ = 648 nm), even though PAHlarge can absorb light with this wavelength. Interestingly, when PAHlarge is mixed with PAHsmall, substantial photooxidation is observed for both PAHlarge and PAHsmall. Comparisons of in situ infrared (IR), high-resolution mass spectrometry, and electron paramagnetic resonance analysis indicate that the presence of PAHsmall inhibits the light quenching effect arising from the π-π stacking of PAHlarge. This leads to the formation of singlet oxygen (1O2), which initiates the photooxidation. Our findings reveal a new mechanism for the photooxidation of PAHs and suggest that complex atmospheric PAHs exhibit distinct photoreactivity from simple systems.

Influence of metal-phenolic networks on the properties of soy protein isolates gels

In this study, epigallocatechin-3-gallate (EGCG) was preliminarily coordinated with three types of metal ions to form metal-phenolic networks (MPNs) solutions, which were introduced into soy protein isolate (SPI) solutions to prepare SPI-MPNs composite hydrogels. This study aims to compare the effects of different types and varying addition levels of MPNs on the structure and mechanical properties of SPI gels. Dynamic light scattering and XPS results show that MPNs increase particle sizes in the composite system, and hydrogen bonding between MPNs and SPI causes smaller SPI molecules to aggregate into larger protein clusters. Low-field nuclear magnetic resonance analysis indicates that SPI-MPNs composite gels retain more water, with the majority of the water being successfully immobilized within the gel network. Rheological and textural analysis results indicate that the presence of MPNs can form a more rigid structure, significantly enhancing the mechanical properties of the composite gels. The group of gels with the highest strength exhibited a G’ value that was 2.1 times higher than that of the SPI gels, indicating the formation of a more stable three-dimensional network structure. These findings have significant potential implications for the application of SPI-MPNs composite gels in the food industry.

Electrochemical activation of periodate with graphite electrodes for degradation of high concentrations of thiocyanogen (SCN−) in mineral processing tail liquid

Cyanide has been widely used in gold extraction due to its cost-effectiveness, high selectivity and recovery. Regrettably, its wide application also leads to the presence of a large amount of thiocyanogen (SCN−) in the tail liquid of mineral processing plants, which affects the quality of the effluent water, and thus poses a threat to the ecological environment and human health. This paper investigates the degradation of high concentration of SCN− in water using electrochemical oxidation/periodate (E-GP/PI) system. A degradation rate of 90.25 % of SCN− was achieved by optimising various operating parameters. The effects of organic matter and typical heavy metal ion concentrations on the degradation of SCN− were investigated, and it was found that Cu2+ was able to promote the degradation of SCN− through the formation of stable complexes with SCN−, which enhanced the degradation rate to 96.48 %. However, the presence of Octadecyltrimethylammonium bromide (OTAB) and butylxanthin hindered the degradation process, where 500 mg/L of OTAB reduced the degradation rate of SCN− to 80.88 %, while 100 mg/L of butylxanthin reduced the degradation rate to 78.66 %. On this basis, experiments were carried out using real wastewater samples and SCN− degradation efficiencies of about 90 % were obtained. Afterwards, through electron paramagnetic resonance analysis, free radical burst, ion chromatograph and other research techniques, IO3 and O2– were obtained as the main drivers of SCN− degradation and SCN− degradation pathways were elucidated. Finally, the E-GP/PI system was shown to be effective in reducing the ecotoxicity of SCN− by increasing the 24-h LC50 from 12.5 % to 48.5 % in a toxicity test with daphnia. This study provides a new idea for the green and efficient treatment of SCN− rich beneficiation tail liquid.

1H-NMR, HPSEC-RID, and HPAEC-PAD Characterization of Polysaccharides Extracted by Hydrodynamic Cavitation from Apple and Pomegranate By-Products for Their Valorization: A Focus on Pectin

Several chemical analytical methods were applied to characterize the chemical structure of polysaccharides extracted from discarded apples and pomegranate peels using hydrodynamic cavitation methods in a circular economy perspective. In particular, the purity of the polysaccharides and the degrees of acetylation and methylation were evaluated by proton Nuclear Magnetic Resonance (1H-NMR) analysis; simple sugars and galacturonic acid were analyzed simultaneously by High-Performance Anion Exchange Chromatography—Pulsed Amperometric Detector (HPAEC-PAD); the molecular weight of the extracted polysaccharides was determined by High-Performance Size Exclusion Chromatography-Refractive Index Detector (HPSEC-RID). The results showed a negligible presence of co-precipitated proteins/tannins, easily removed by dialysis, as well as other co-precipitated molecules such as monosaccharides and organic acids. Polysaccharides from apples consisted mainly of pectic material with a prevalence of homogalacturonans. Polysaccharides from pomegranate peels showed greater compositional variability with significant amounts of arabinose and galactose, a lower content of pectin, and the presence of rhamnogalacturonans I. Both polysaccharides were highly methylated and differed in the degree of acetylation, which could lead to different properties. Polysaccharides from apples presented two main molecular weights (>805 kDa and 348–805 kDa, respectively), while those from pomegranate peel showed a major fraction at 348 kDa and minor fractions < 23 kDa. In conclusion, the research tools proposed by this study have allowed defining the macrostructure of polysaccharides in a quick and efficient way to valorize these food by-products.

Theoretical and experimental investigation of mixed-ligand metal(II) Schiff base complexes using maleic acid as the auxiliary ligand

This work is focused on the synthesis of several transition metal complexes [ML(MA)], where M = Copper (II), Zinc (II), Cobalt (II) and Nickel (II), MA = maleic acid and L = Schiff base generated from benzene-1,2-diamine [o-phenylenediamine] and 4-chlorobenzaldehyde. The characterization using Fourier-Transform Infrared, Nuclear Magnetic Resonance spectroscopy, Ultraviolet-Visible spectra, Mass, Electro Paramagnetic Resonance and elemental analysis confirm the square planar geometry of the complexes. The in vitro antimicrobial potential of the complexes has been tested by the broth dilution method and the antioxidant method has been done by free radical scavenging analysis. The in vitro methods reveal the outstanding biological characteristics of the copper complexes. The molecular structure of the ligand and its metal (II) complexes has been optimized using Density Functional Theory studies performed by the Gaussian-09 software and their parameters have been discussed. Natural Bond Orbital and Frontier Molecular Orbital analyses have assessed the presence of a metal-ligand bond in complexes. In addition, molecular docking studies have also been performed on antiviral activity of all the complexes using a viral protein and their interacting amino acids.

Design, synthesis, and bioactivity investigation of novel cyclic lipopeptide antibiotics targeting top-priority multidrug-resistant gram-negative bacteria

ObjectivesPolymyxins are the last-line therapy for top-priority multidrug-resistant (MDR) gram-negative bacteria. However, polymyxin nephrotoxicity impedes its clinical application. This study aimed to design, synthesize, and identify a novel and promising polymyxin derivative with high efficacy and low toxicity. MethodsTo design polymyxin derivatives, we reduced the hydrophobicity of the two hydrophobic domains (fatty acyl chain and D-Phe6-L-Leu7) and modified the positive charged L-2,4-diaminobutyric acid (Dab) residues. Twenty-five derivatives were synthesized, and their antibacterial activities in vitro and renal cytotoxicities were determined. The nephrotoxicity and pharmacokinetic parameters of compound 12 were examined in rats. Antibacterial efficacy in vivo was evaluated using a mouse systemic infection model. Surface plasmon resonance analysis, compound 12-rifampicin combination therapy, and scanning electron microscopy were used to study the mechanism of action of compound 12. ResultsThis research found a new compound, identified as compound 12, which showed similar or increased antibacterial activity against all tested sensitive and carbapenem-resistant gram-negative bacteria. It exhibited reduced renal cytotoxicity and nephrotoxicity, a favorable pharmacokinetic profile, and maintained or improved antibacterial efficacy in vivo. Importantly, its anti-Pseudomonas aeruginosa activity significantly improved. Compound 12, when combined with rifampicin, enhanced the activity of rifampin against gram-negative bacteria. Compound 12 also showed a high affinity for lipopolysaccharide and disrupted cell membrane integrity. ConclusionReducing the hydrophobicity of the two domains reduced renal cytotoxicity and nephrotoxicity. Shortening the side chain of Dab3 by one carbon maintained or increased its antibacterial activity both in vitro and in vivo. Furthermore, only the length of the side chain of Dab9 could be shortened by one carbon among the Dab1,5 and Dab8,9 residues. The bactericidal effects of compound 12 were related to the disruption of cell membrane integrity. Compound 12 may be a promising candidate for combating sensitive and carbapenem-resistant gram-negative bacterial infections, especially Pseudomonas aeruginosa.

Hydrogen-bonded organic framework for fire-safe epoxy composite with photochromic properties and rapid de-icing capability

Multifunctionalized epoxy resin (EP) composites are essential for advancing technological innovation across various applications. One efficient method to achieve this is through the development of multifunctional EP fillers. In this work, 2,4,6-tri(pyridin-4-yl)pyridine (Tripp) as electron acceptor and phosphoric acid as electron donor are self-assembled to form a donor–acceptor (D-A) type hydrogen-bonded organic framework (HOF, named P-HOF) using a solvent volatilization method. P-HOF exhibits excellent photochromic and photothermal properties under 365 nm UV irradiation. Electron paramagnetic resonance (EPR) analysis confirms the generation of viologen radicals, and the internal electron transfer mechanism of P-HOF is further elucidated using X-ray photoelectron spectroscopy (XPS). Furthermore, incorporating 3 wt% P-HOF into EP as a filler results in an EP/P-HOF composite that not only retains excellent photochromic and photothermal properties but also demonstrates rapid de-icing and outstanding flame retardancy. The EP/P-HOF coating demonstrates a de-icing efficiency that is 3.83 times higher than that of pure EP coatings. Compared to pure EP, the EP/P-HOF significantly reduced the peak heat release rate (pHRR), total heat release (THR), and peak smoke production rate (pSPR) by 55.0 %, 19.6 %, and 29.6 %, respectively.

Design of a hybrid nanoscaled skin photoprotector by boosting the antioxidant properties of food waste-derived lignin through molecular combination with TiO2 nanoparticles

TiO2 nanoparticles loaded with pistachio shell lignin (8 % and 29 % w/w) were prepared by a hydrothermal wet chemistry approach. The efficient interaction at the molecular level of the biomacromolecule and inorganic component was demonstrated by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV–Visible (UV–Vis), Fourier transform infrared (FT-IR), dynamic light scattering (DLS), and electron paramagnetic resonance (EPR) analysis. The synergistic combination of lignin and TiO2 nanoparticles played a key role in the functional properties of the hybrid material, which exhibited boosted features compared to the separate organic and inorganic phase. In particular, the hybrid TiO2-lignin nanoparticles showed a broader UV–Vis protection range and remarkable antioxidant performance in aqueous media. They could also better protect human skin explants from the DNA damaging effect of UV radiations compared to TiO2 as indicated by lower levels of p-H2A.X, a marker of DNA damage, at 6 h from exposure. In addition, the samples could protect the skin against the structural damage occurring 24 h post UV radiations by preventing the loss of keratin 10. These results open new perspectives in the exploitation of food-waste derived phenolic polymers for the design of efficient antioxidant materials for skin photoprotection in a circular economy perspective.

Synergistic activation of peroxymonosulfate for tetracycline hydrochloride degradation with SrTiO3/Ti3C2Tx photocatalyst

Peroxymonosulfate (PMS) is a promising technology for increasing the oxidation capacity and promoting the production of active species in the photocatalytic system. SrTiO3, a material with a perovskite crystal structure in a cubic form, can activate PMS on its surface and generate non-radical 1O2. Herein, SrTiO3/Ti3C2Tx (ST) composites were successfully synthesized using a hydrothermal method based on SrTiO3 materials. The photocatalytic activation of PMS resulted in the degradation of tetracycline hydrochloride (TC-HCl), with the ST-10 (10 wt% SrTiO3/Ti3C2Tx) composite showing the highest efficiency in TC removal and rapid degradation kinetics, achieving complete TC removal within 10 min. The synergistic interaction between the two components in ST-10 significantly enhanced the activation of peroxymonosulfate (PMS), leading to an increased production of free radicals. The larger specific surface area and presence of –OH groups in the composite material facilitated the adsorption and chemical bonding of PMS molecules, thereby improving their overall performance. Quench experiments and electron paramagnetic resonance analysis identified •SO4−, •OH, •O2– and 1O2 as the primary active species responsible for the degradation of TC. Additionally, the degradation pathway of TC was elucidated through mass spectrometry analysis. This study provides valuable insights for the development of effective photocatalysts as promising PMS catalysts in environmental applications.

A highly efficient Co-based catalyst for peroxymonosulfate activation for rapid degradation of RhB over a wide pH range

Cobalt-based materials have been demonstrated to be effective heterogeneous catalysts for peroxymonosulfate activation in degrading many refractory organic pollutants. In this study, a new cobalt-based catalyst was prepared using cobalt chloride hexahydrate (CoCl2·6H2O) as the Co2+ source, 2,3-pyrazine dicarboxylic acid and 3,6-DI-4-pyridyl-1,2,4,5-tetrazine (4-PYTZ) as ligands. This catalyst was employed as a peroxymonosulfate activator for the degradation of Rhodamine B(RhB). The results indicated that the prepared Co-based catalyst can effectively degrade RhB dye in aqueous solution by activating peroxymonosulfate (PMS). Specifically, when the initial concentration of RhB was 20 mg/L, its degradation rate exceeded 98 % within merely 9 min. The factors influencing the activation of PMS by the Co-based catalyst were examined, including PMS concentration, reaction temperature, solution pH, and the concentration of organic pollutants. Stability and reusability tests demonstrated that the prepared catalyst exhibited good stability, with the degradation rate of RhB remaining above 97 % after four repetitive experiments. Free radical quenching experiments and electron paramagnetic resonance (EPR) analyses revealed that sulfate radicals (SO4−) and hydroxyl radicals (OH) are the primary reactive radicals accountable for the degradation process. Additionally, it displayed excellent adaptability over a wide pH range, particularly within the pH levels ranging from 5 to 9. This study demonstrates that the prepared Co-based catalyst can serve as a stable and effective option for degrading organic dyes in wastewater treatment applications.