Layout Analysis Research Articles

360 Layout Estimation via Orthogonal Planes Disentanglement and Multi-View Geometric Consistency Perception.

Existing panoramic layout estimation solutions tend to recover room boundaries from a vertically compressed sequence, yielding imprecise results as the compression process often muddles the semantics between various planes. Besides, these data-driven approaches impose an urgent demand for massive data annotations, which are laborious and time-consuming. For the first problem, we propose an orthogonal plane disentanglement network (termed DOPNet) to distinguish ambiguous semantics. DOPNet consists of three modules that are integrated to deliver distortion-free, semantics-clean, and detail-sharp disentangled representations, which benefit the subsequent layout recovery. For the second problem, we present an unsupervised adaptation technique tailored for horizon-depth and ratio representations. Concretely, we introduce an optimization strategy for decision-level layout analysis and a 1D cost volume construction method for feature-level multi-view aggregation, both of which are designed to fully exploit the geometric consistency across multiple perspectives. The optimizer provides a reliable set of pseudo-labels for network training, while the 1D cost volume enriches each view with comprehensive scene information derived from other perspectives. Extensive experiments demonstrate that our solution outperforms other SoTA models on both monocular layout estimation and multi-view layout estimation tasks.

Методы детектирования и локализации пленочных резистивных элементов для лазерной подгонки их параметров: обзор

Laser trimming (normalization) of film resistive elements (REs) by making adjustments to their configuration is one of the most frequently used and promising methods for tuning electrical parameters of circuits in microelectronics. Given that the geometric sizes of REs and the diameter of the laser beam are crucial initial data for resistor modeling, the necessity for analysis of the actual layout of the board is evident. The key aspect in the adjustment of film REs is precise detection and accurate determination of the RE’s position and defects within the coordinate system of the laser trimming machine using information from the video feed. The paper presents a systematic review of modern methods for detecting and localizing elements in images of microcircuit boards and hybrid integrated circuits. Literature analysis revealed that there are very few publications directly related to the task of precision detection of film resistors, except for a small number of studies. Therefore, the review also includes research on detecting and recognizing surface-mounted components, as well as defect localization on printed circuit boards.

Improvement of the functional layouts of multifunctional soil-cultivating sowing units

BACKGROUND: With the technology evolution, the use of combined machines and units has become more in demand. From the numerous studies that were carried out during the operation of machines of this type, it can be seen that the cost of raw materials and financial costs have been significantly reduced, and the number of other advantages has been identified as well. AIM: Improvement of the functional layouts of multifunctional tillage sowing units for a more optimal combination of structural layouts and parameters of its use. METHODS: Engineers use the method of changing working bodies designed as layouts aiming to turn the machines into the modules capable of performing various types of operations based on working conditions. Thanks to this method, sets of individual working bodies and combinations are prepared for any kind of conditions (soil, climate, etc.). In addition to the advantages, this system has a number of disadvantages. One of these is that at the factory-built modules that are part of the original basis of the unit cannot be fully adapted to environmental conditions and economic factors of production. In this regard, combination of structural layouts and selection of the necessary parameters become problem causing. It is difficult to choose necessary parameters that are capable of ensuring minimal losses and adjusting the unit to the necessary operating mode. The objects of study are the devices and production processes, the main task of which is performing tillage and sowing operations. The practical value of this study presented in the form of: building the algorithm capable of structuring the analysis and synthesis of the structural layout of the tillage-sowing unit to find the working links for various types of unit functions; finding the methods and improved combinations of working bodies, comparison of similar mechanical analogues with the original properties of systems. RESULTS: When studying the studies of Wilde, who gave a description of the combined units, as well as the studies of Runchev, who determined the generalization of the combined machines, the relevant typology of agricultural machinery was developed. In this typology, one of the most important characteristics is multifunctionality, which has developed from the need for the versatility of units and the compilation of combinations of several units. The developed technology contains a number of characteristics that are fundamental for the choice of agricultural machinery. CONCLUSION: As a result of the study, it was determined at which velocity of the unit the system is balanced.

Multi-criteria optimization next to a comparative analysis of a polygeneration layout based on a double-stage gas turbine cycle fueled by biomass and hydrogen

The significance and advantages of utilizing renewable energy sources are widely recognized. Upon examining past studies, it was revealed that there has been a lack of research on harnessing the waste energy from double-stage gas turbines powered by biomass-hydrogen hybrid fuel for polygeneration applications. Thus, a new configuration is proposed in the study for the multi-production of electricity, cooling, heating, and potable water. In the current research, a high-pressure turbine is driven by a combustion chamber fed by a biomass gasifier. Meanwhile, a low-pressure turbine is driven by a post-combustion chamber fed by hydrogen as fuel. The heat loss of the topping gas turbine cycle is recuperated by a supercritical Brayton cycle (SBC), a steam Rankine cycle (SRC), and a water heater. The waste heat of the supercritical Brayton cycle and steam Rankine cycle is recovered through an absorption refrigeration cycle and a thermoelectric generator, respectively. Thus, the heat loss of the topping system is completely recovered. The net power output of the gas turbine cycle is considered the electricity production of the system while the output power of the SBC and SRC is utilized in a reverse osmosis desalination system to produce potable water. The investigations conducted on the system are thermodynamic and exergy-economic assessments and three-objective optimization utilizing 5 gases (i.e., CO2, CO, Nitrogen, Air, and Helium) in the SBC. The final results reveal the superiority of Helium as the supercritical gas, bringing about an exergy efficiency (ηex) of 32.11 %, a total cost rate (C˙tot) of 103 $h−1, a payback period (PP) of 0.159 years, and a specific cost of polygeneration (cpoly) of 22.03 $GJ−1 for the system. Although the levelized cost of products of the configuration is high due to the freshwater production, ηex of the proposed system is higher than the previous systems based on a double-stage gas turbine cycle driven by biomass and hydrogen.

Towards Hydraulic Design Optimization of Shaft Hydropower Plants: A 3D-CFD Application Based on Physical Models

The shaft hydropower plant (SHPP) is a novel hydraulic concept for low-head hydropower sites with several environmental and operational advantages over conventional layouts. However, the first two projects implementing this concept have shown comparatively high construction costs and project risks. Therefore, further optimization is required to increase economic attractiveness and enable broader market adoption. Initial model tests recommend a square-shaped shaft inlet with a three-sided approach flow for low-loss and fish-friendly inflow conditions. Yet, this design requires significant space for structural implementation and may be unsuitable for use with multiple shafts or as an extension of non-powered dams and weirs. This research paper presents the application of a computational fluid dynamics simulation setup to evaluate the hydraulic performance of various design configurations, especially alternative design layouts with a one-sided approach flow without further physical model tests. The simulation setup is calibrated against observations including head loss and velocity measurements from the physical model tests, and its satisfactory performance enables the analysis of alternative design layouts. This study aims to derive the most significant design parameters for achieving the desired hydraulic conditions at the intake. Increasing the flow depth before the intake and enlarging the inlet area have the most significant impact, while increasing the overflow of the front gate has the least significant effect. The chosen CFD application is deemed suitable for hydraulic design optimization and provides guidance on the key parameters to focus on for tailored site-specific design development.

Potential assessment and development obstacle analysis of CCUS layout in China: A combined interpretive model based on GIS-DEMATEL-ISM

Although carbon capture, utilization, and storage (CCUS) has enormous emission reduction potential and application prospects, it still faces many obstacles and challenges in the actual deployment and promotion process. This study aims to evaluate the spatial suitability of the CCUS layout comprehensively and deeply analyze key development obstacles to provide a scientific basis for the promotion and layout of CCUS. Therefore, this article constructs a combination of Geographic Information Systems (GIS), Decision-making trial and evaluation laboratory (DEMATEL) method, and Interpretive structure model (ISM). Firstly, a comprehensive evaluation is conducted on the suitability of the CCUS layout in China based on GIS technology, identifying high-potential areas. The results indicate that when the threshold is 80 % of the highest score for suitability, a total area of 1.46 million square kilometers is suitable for the CCUS project layout. When it dropped to 60 %, this data increased to 2.04 million square kilometers. These areas are mainly distributed in large basin areas with abundant resources. Secondly, the DEMATEL-ISM analysis framework is improved to systematically identify and analyze the key obstacles that constrain the promotion of CCUS in China. The results indicate that there is a very complex relationship between the obstacles that constrain the development of CCUS, with the fundamental reasons being the lagging technological level and imperfect policies and regulations. Finally, goal-oriented suggestions and response measures were proposed, and targeted analysis was conducted on high-suitability areas. This study constructed an interdisciplinary methodology interpretive model to provide decision support for the CCUS layout and targeted strategies to break through current development barriers and promote the rapid development of CCUS.

Ergonomic optimization in forestry harvesting: analysis of indicators and workstation layout for machine operators

The planted tree sector in Brazil plays a significant role in the national economy, driven by technological advancements in forestry machines, especially in harvesting. The interaction between operators and machines has become essential for improving performance and ensuring occupational health. This study analyzed forest harvesting machine operators, focusing on anthropometric surveys and proposing indicators for ergonomic satisfaction and cabin layout. Conducted between May 2022 and July 2023 in a northeastern Brazilian forestry company, data were collected during mechanized harvesting of a six-year-old Eucalyptus spp. stand using the cut-to-length system. A questionnaire was applied to 111 employees to assess their ergonomic satisfaction and health. Two indices were created: the Ergonomic Satisfaction Coefficient and the Occupational Health Coefficient. The anthropometric analysis evaluated operators’ percentiles and BMI, revealing that 77.77% were overweight, highlighting the need for health protection measures. The ergonomic indices proved effective in assessing operator satisfaction. The study also determined an adequate workstation layout for the sample group. From the Ergonomic Work Analysis perspective, FW2 and HV3 machines received a good rating based on the adopted parameters.

Impact analysis of core layout and crosstalk on the coexistence of quantum key distribution and classical communications in heterogeneous multicore fiber.

Heterogeneous multicore fibers (Hetero-MCFs) offer relatively lower inter-core crosstalk (XT) and improved bend resistance, making them feasible for the coexistence of quantum key distribution (QKD) and classical communications. However, detailed analyses of their impact on QKD performance remain limited. This study comprehensively investigates the significant effects of core layouts and XT on QKD performance in Hetero-MCFs under varying QKD service demands in theory. When allocating classical and quantum cores based on the maximum XT levels, hexagonal Hetero-MCFs perform the worst under low QKD service demand (LD), but comparably and superior to circular layouts under high QKD service demand (HD). The challenge of determining optimal parameters for the central core in hexagonal Hetero-MCFs critically influences overall QKD performance in both HD and LD scenarios. To address this, we propose a novel trench-assisted Hetero-MCF structure featuring an interleaved hexagonal core layout. This structure achieves at least 29-fold improvement in transmission distance for LD and 32-fold for HD scenarios compared to the benchmark, by utilizing two types of heterogeneous cores and providing greater flexibility. Our results also show that deploying homogeneous cores as quantum channels in Hetero-MCFs enhances QKD performance. Even with strict fabrication tolerances, the proposed structure maintains stable QKD performance with a maximum fluctuation of only 12%. These innovations provide valuable insights for analyzing the performance of Hetero-MCFs under varying QKD demands and further developing their co-fiber transmission applications.

A multi-sectional analysis of building height, layout, and urban density on seasonal energy consumption: A case study

This study aims to investigate the influence of building height and layout on energy consumption. It also analyzes methods for reducing energy consumption in these buildings. The EnergyPlus software performs simulations under local climatic conditions for all seasons. The city is divided into several sections based on cardinal directions, and energy consumption is calculated for each section, considering the city's distinct seasonal variations. Buildings in suburban areas with more sunlight exhibited higher overall energy consumption due to the reliance on heating and cooling systems, compared to the city center where denser urban areas moderated temperature extremes. Additionally, building design and insulation played significant roles. The analysis also revealed a west-to-east trend; higher consumption at the edges compared to the center. This is attributed to factors such as building density and shade from taller structures. The study further examined the impact of varying building heights. While most buildings were 20 meters tall, specific rows ranged from 21 to 25 meters. Changing these heights resulted in decreased cooling and increased heating demands in the north-south analysis, and reduced demands for both heating and cooling in the west-east analysis. This highlights the complex interplay between building layout, height, and energy consumption.

In-domain versus out-of-domain transfer learning for document layout analysis

AbstractData availability is a big concern in the field of document analysis, especially when working on tasks that require a high degree of precision when it comes to the definition of the ground truths on which to train deep learning models. A notable example is represented by the task of document layout analysis in handwritten documents, which requires pixel-precise segmentation maps to highlight the different layout components of each document page. These segmentation maps are typically very time-consuming and require a high degree of domain knowledge to be defined, as they are intrinsically characterized by the content of the text. For this reason in the present work, we explore the effects of different initialization strategies for deep learning models employed for this type of task by relying on both in-domain and cross-domain datasets for their pre-training. To test the employed models we use two publicly available datasets with heterogeneous characteristics both regarding their structure as well as the languages of the contained documents. We show how a combination of cross-domain and in-domain transfer learning approaches leads to the best overall performance of the models, as well as speeding up their convergence process.

Multi-Objective Sensitivity Analysis of a Wind Turbine Equipped with a Pumped Hydro Storage System Using a Reversible Hydraulic Machine

A typical wind system captures wind energy and converts it into electricity, which is then converted to DC for battery storage using an AC/DC converter; an inverter then supplies AC electricity at the grid frequency. However, this solution involves losses in electronic components and incurs costs and environmental impacts associated with battery storage. To address these issues, a different wind system layout configuration is considered, where the energy storage duties are assumed by a hydro storage system employing a reversible hydraulic pump (referred to as a Pump as Turbine). This solution utilises an elevated reservoir connected to the Pump as Turbine to compensate for fluctuations in wind and load; this approach offers lower costs, a longer lifespan, reduced maintenance, and a smaller waste management cost. This study focuses on a comprehensive sensitivity analysis of the new wind system power layout, considering multiple objectives. Specifically, the analysis targets the net change in the mass of water (potential energy) stored in the pumped hydro system, the captured wind energy, and the torque provided in hydraulic turbine mode. On the other hand, the design variables are represented by the Pump as Turbine-specific speed, the hydraulic system gearbox ratio, and the pump head. To assess how solutions are affected by random changes in wind speed and external load, the sensitivity analysis considers the multi-objective optimisation problem showing for both the wind speed and the external load a stochastic contribution.

Sistem Informasi Penjualan dan Stok dilengkapi dengan Mapping Rak pada Toserba

In the digital era, the advancement of information technology is crucial for enhancing operational efficiency in retail businesses. This study aims to design and develop a sales and inventory information system with a shelf mapping feature for Toserba Decky, which faces challenges in managing stock and manual transactions. The methodology employed is the Waterfall approach, encompassing requirements analysis, design, implementation, and system testing. Data was collected through direct observation, literature review, and analysis of the store's shelf layout. The findings indicate that the developed system can improve data accuracy, reduce recording errors, and expedite product searching. The implications of this research suggest that an effective information system in managing transactions and inventory can enhance operational efficiency and customer satisfaction. This study recommends regular system updates and technical support to ensure optimal system performance and security.

Study of the Crowbar's Functioning in Doubly Fed Induction Wind Generators: Towards Achieving Fault Ride Through Capability

This work examines the analysis of temporary behaviors and crowbar hardware layout for enhancing the fault ride-through capability (FRTC) in doubly fed induction wind generators (DFIWGs) A crowbar that is linked in parallel to the rotor side converter (RSC) is a feature found on the majority of DFIWGs these days to safeguard the RSC and DC-bus capacitor (DCBC). Previous studies demonstrated that the crowbar resistance has an impact on the DFIWG transient response's oscillations and peak values. In order to satisfy the FRTC criterion, the article initially methodically examines the DFIWG dynamics with and without a crowbar during a 100% voltage dip and studies the effects of two resistance values on the DCBC. It has been demonstrated that choosing a crowbar resistance greater than the permitted range may cause the DFIG FRT performance to decline. By actively addressing grid faults and improving performance, stability, and dependability, this integrated crowbar shows the potential of state-of-the-art control approaches for the dependable and efficient use of DFIWGs. MATLAB/Simulink is used to run robust simulations, and the results unambiguously show that the proposed model may significantly improve the FRTC of DFIWGs.

Multi-objective optimization analysis of construction management site layout based on improved genetic algorithm

In construction management, the rationality of on-site layout is crucial for project progress, cost, and safety. In order to improve the rationality of on-site layout, a multi-objective optimization model combining ant colony algorithm and Pareto optimal solution was constructed based on genetic algorithm, and this model was applied to practical engineering cases. The results show that in terms of computational time, the genetic algorithm takes an average of 1702.0 s, while the improved algorithm takes an average of 421.0 s, which is 1281s less and 85.9% more than before the improvement. The performance of the improved algorithm is the best, and the optimal solution can be obtained through multiple iterations. The improved algorithm has improved the efficiency of on-site layout optimization, and possesses practical application value for the layout of construction management sites. It offers a certain reference for the reasonable setting of construction management sites.

On the selection of humidification dehumidification desalination system cycle for high productivity, low energy consumption and low capital cost

Humidification Dehumidification (HDH) desalination is a convenient process to produce drinking water from low temperature saline water in waterfront areas. High energy consumption of the system remains as a limiting factor, besides many enhancements done in improving the system performance. Though HDH system cycles are classified on the basis of air and water cycles, detailed performance analysis of different HDH cycles is absent till date. The present study aims at carrying out parametric analysis of possible HDH layouts and finally proposing a layout with high Gain Output Ratio (GOR) and Recovery Ratio (RR) at the low equipment volumes. Simulations are carried out using the Scilab® software. Simulation results are validated using the experimental data obtained from a pilot plant of open-air open-water single stage system. Variation of system parameters like humidifier volume, dehumidifier volume, GOR and RR were analysed in detail for each individual layouts. Out of the eight different layouts investigated, Layout 8 is found to be the best based on GOR, RR, equipment volume and specific energy consumption. Hence it is recommended to use Layout 8 with an inlet temperature of 74 °C and MFR of 2.4 for productivity of 90 LPH.

Approximate ground truth generation for semantic labeling of historical documents with minimal human effort

Deep learning approaches have shown high performance for layout analysis of historical documents, provided that enough labeled data is available. This is not an issue for generic tasks such as image binarization, text graphics separation, or text line and text block detection but can become an impediment for more specialized tasks specific to one or a few books only. This paper addresses layout analysis of medieval books with rich and complex layouts, for which no labeled data is initially available. The proposed strategy consists of training an initial model with artificial data created to reflect the rules a deep neural network should learn. Then, the model is iteratively fine-tuned by mixing the artificial data with real data obtained by previous predictions, post-processed, and manually selected by an expert user. Such a strategy needs less human effort than manual ground truthing. The approach is qualitatively and quantitatively assessed and shows that the system converges to an accurate model that finally produces approximate ground truth stable and good enough to train a final model to solve the targeted task with high accuracy.

Material optimization of reinforced concrete structures in multiple limit states

AbstractA common limitation in current material optimization methods for reinforced concrete structures is that they often concentrate solely on either the serviceability limit state (SLS) or the ultimate limit state (ULS). In response, this paper introduces a novel approach to optimize the material layout in planar reinforced concrete structures in plane stress, accounting for both limit states simultaneously. The proposed method employs an iterative strategy, integrating criteria for serviceability and ultimate limit states while approximating the elastoplastic behavior of cracked reinforced concrete. Here, the criteria for the limit states are incorporated as limits on the strains. The methodology initiates with a finite element limit analysis for the preliminary layout. The minimum potential energy principle is utilized to determine the strains for the nonlinear material response, and subsequently, an iterative linearized method is applied for material optimization. The research showcases the successful application of this approach to simple examples and presents improved and optimized solutions that adhere to the limit criteria for more complex structural scenarios.

4E Study and Best Performance Analysis of a Hydrogen Multi-Generation Layout by Waste Energy Recovery of Combined SOFC-GT-ORC

4E Study and Best Performance Analysis of a Hydrogen Multi-Generation Layout by Waste Energy Recovery of Combined SOFC-GT-ORC

SemiDocSeg: harnessing semi-supervised learning for document layout analysis

SemiDocSeg: harnessing semi-supervised learning for document layout analysis

Optimizing the production process of biscuit industry as an approach to strengthening the local agricultural sector which reduce vulnerability of the global food crisis case study: analysis of waste in coconut biscuit industry with the DMAIC method

Abstract The local biscuit industry as a potential partner in the agricultural sector continues to grow rapidly. The development of local industries, including the coconut biscuit industry, must be continuouslyoptimized as an approach to empowering local agricultural sector that indirectly play a role in reduce vulnerability of the global food crisis. This makes the industry continue to try to find and adopt efficient and effective ways to increase product value and expand market share, one of the ways is the application of lean manufacturing. In this article, a case study is used in the coconut biscuit industry using the DMAIC analysis method and several tools such as VALSAT, fishbone diagrams and FMEA. Based on the analysis conducted, it is known that in the coconut industry there are several wastes such as unnecessary motion, defects and rework, and waiting with non-value added (NVA) activities for 784s. Therefore, further analysis is carried out regarding the proposed improvements that might be implemented. Some of the suggestions for improvement that can be given are the preparation of a buffer tank that is integrated with aload cell and transfer using a piping system, determine standardization of temperature and treatment of ovens as well as stipulation of work instructions and briefings during the initial process of the production line, analysis and evaluation of capacity, line layout, and lifetime on sugar water silo pumps and adjustments size and maintenance of dough tubs so as to reduce waste and NVA in the production process area.