Analysis Of Microbial Community Structure Research Articles

Cobalt-modified digestate-derived biochar enhances kitchen waste anaerobic dry digestion: Performance, microbial mechanisms, and metabolic pathways

To achieve simultaneous in-situ high-value utilization of digestate and efficient resource recovery of kitchen waste (KW). In this work, Co-modified digestate-derived biochar (DDB-Co) was prepared for the first time, the effects of DDB-Co on KW mesophilic dry anaerobic digestion were investigated, and the underlying mechanisms were elucidated. The results showed that the specific surface area of DDB-Co increased to 98.7 m2/g, which was 37.4 % higher than that of the unmodified group (DDB). DDB-Co exhibited a dose-dependent effect on biogas production from the KW dry digestion, with the optimal dose of 4.0 g/L (calculated on a solid content) DDB-Co yielding 205.3 mL/(g·VS) of biogas, representing an 80.9 % increase compared to the CK group. However, higher doses, such as 8.0 g/L DDB-Co, reduced the cumulative biogas production. Mechanistic analysis indicated that 4.0 g/L DDB-Co facilitated the dissolution of particulate organic matter and accelerates the conversion process of volatile fatty acids (VFA) in KW, thereby preventing excessive acidification. Microbial community structure analysis revealed that DDB-Co reduced microbial richness and diversity but selectively enriched microorganisms such as Lactobacillus and Methanothrix, accelerating the direct interspecific electron transfer (DIET) reaction rate and increasing biogas production. Metagenomic analysis demonstrated that DDB-Co primarily upregulated the relative abundances of key enzymes in the acetate decarboxylation methanogenesis pathway, such as acetate kinase (ackA), phosphate acetyltransferase (pta), and acetyl-CoA synthetase (acs), enhancing biogas yield and maintaining system stability. The findings of this work expand the high-value utilization pathways for digestate and provide an alternative solution for the efficient resource recovery of KW.

Experimental Study on the Removal of Pollutants from Domestic Wastewater in a Strongly Constructed Wetland with an Applied Electric Magnetic Field

The addition of physical field enhancement measures to improve the purification effect of vertical flow artificial wetlands has gradually become popular. In this study, a vertical flow artificial wetland system reinforced by electric and magnetic fields was constructed. These fields were first optimized using finite element 3D simulation software to obtain the optimal electric and magnetic field parameters. Then, the pollutant removal effects and changes in microbial community structure were comparatively analyzed. The optimal electromagnetic field parameters (applied voltage of 15 V and applied magnetic field of 20 mT) resulted in significantly enhanced removal rates of chemical oxygen demand (COD), nitrate nitrogen (NH4+-N), total phosphorus (TP), and orthophosphorus (PO43−-P) in wastewater, with rates of 74.47%, 45.44%, 89.85%, and 90.04%, respectively. These rates were notably higher than those observed in the vertical flow artificial wetland system. The microbial community structure analysis revealed that the vertical flow constructed wetland with enhanced electric and magnetic fields exhibited (EM-VFCW) a more diverse and complex microbial community structure. Notably, the abundance of bacteria capable of removing NH4+-N and COD, including Aspergillus, Fusarium, and Actinobacteria, was significantly elevated.

Unraveling the Role of Contaminants Reshaping the Microflora in Zea mays Seeds from Heavy Metal–Contaminated and Pristine Environment

Heavy metal (HM) contaminants are the emerging driving force for reshaping the microflora of plants by eradicating the non-tolerance and non-resistant microbes via their lethal effects. Seeds served as a prime source of ancestral microbial diversity hereditary transfer from generation to generation. However, the problem arises when they got exposed to metal contamination, does metal pollutant disrupt the delicate balance of microbial communities within seeds and lead to shifts in their microflora across generations. In this study, the endophytic community within Zea mays seeds was compared across three distinct regions in Yunnan province, China: a HM-contaminated site Ayika (AK), less-contaminated site Sanduoduo (SD), and a non-contaminated Site Dali (DL). High-throughput sequencing techniques were employed to analyze the microbial communities. A total of 492,177 high-quality reads for bacterial communities and 1,001,229 optimized sequences for fungal communities were obtained. These sequences were assigned to 502 and 239 operational taxonomic units (OTUs) for bacteria and fungi, respectively. A higher diversity was recorded in AK samples than in SD and DL. Microbial community structure analysis showed higher diversity and significant fluctuation in specific taxa abundance in the metal-polluted samples exhibiting higher response of microbial flora to HM. In AK samples, bacterial genera such as Gordonia and Burkholderia-Caballeronia-Paraburkholderia were dominant, while in SD Pseudomonas and Streptomyces were dominant. Among the fungal taxa, Fusarium, Saccharomycopsis, and Lecanicillium were prevalent in HM-contaminated sites. Our finding revealed the influential effect of HM contaminants on reshaping the seed microbiome of the Zea mays, showing both the resilience of certain important microbial taxa as well the shifts in the diversity in the contaminated and pristine conditions. The knowledge will benefit to develop effective soil remediation, reclamation, and crop management techniques, and eventually assisting in the extenuation of metal pollution's adverse effects on plant health and agricultural productivity.

Characteristics of Water Environment and Intestinal Microbial Community of Largemouth Bass (Micropterus salmoides) Cultured Under Biofloc Model

To investigate the effects of biofloc mode on the water environment and intestinal microbial community structure of largemouth bass, a 60-day culture experiment was conducted without water replacement in 300-L glass tanks. The experiment included a control group and a biofloc group, each with three replicates. The results showed the following: (i) the richness and diversity of the water environment and fish intestinal microbial community increased under the biofloc model; (ii) Proteobacteria, Patescibacteria, and Bacteroidota were the dominant phyla in the water environment of largemouth bass, while Proteobacteria, Firmicutes, Bacteroidota, Patescibacteria, and Actinobacteriota were the dominant phyla in the gut of largemouth bass. However, differences in the relative abundance and community structure of microorganisms were observed between the two groups, suggesting that the biofloc system impacts both the water environment and intestinal microbial community structure in largemouth bass culture. (iii) A correlation analysis between water quality indices and enzyme activity with microbial abundance revealed that microbial community composition could effectively reflect water quality and fish physiological health. Based on the analysis of microbial community structure, this study offers a theoretical foundation for integrating largemouth bass culture with the biofloc system, and provides valuable data for future health management and water quality control in largemouth bass production.

Effects of Different Dietary Combinations on Blood Biochemical Indicators and Rumen Microbial Ecology in Wenshan Cattle

With the continuous optimization of feed ingredients in livestock production, barley has garnered significant attention as a potential substitute for corn in feed. This study aims to investigate the effects of replacing part of the corn and soybean meal with barley, wheat bran, and rapeseed meal on Wenshan cattle, focusing on the rumen microbial community, blood physiological and biochemical indicators, and growth traits. Through an intensive feeding experiment with two different dietary ratios, we found that adding barley to the diet significantly reduced the host’s blood lipid concentration and significantly increased the height, body length, heart girth, and average daily weight gain of Wenshan cattle. Analysis of the rumen microbial community structure showed that the addition of barley significantly affected the relative abundance of Firmicutes, Proteobacteria, and Bacteroidetes, with the relative abundance of Spirochaetes being significantly lower than that of the control group (p < 0.05). The dominant bacterial groups mainly included Acinetobacter, Solibacillus, and Lysinibacillus. In summary, this study reveals the potential of different feed ingredient ratios involving barley, wheat bran, and rapeseed meal in the production performance of Wenshan cattle. By regulating blood physiology and improving the rumen micro-ecological structure, it provides new scientific evidence for optimizing livestock and poultry feeding management strategies. Future research will further explore the optimal application ratio of barley under different feeding conditions and its long-term impact on animal health and production performance.

Analyses of Rhizosphere Soil Physicochemical Properties and Microbial Community Structure in Cerasus humilis Orchards with Different Planting Years

Analyses of Rhizosphere Soil Physicochemical Properties and Microbial Community Structure in Cerasus humilis Orchards with Different Planting Years

Weathering of Buried Standard Pieces of Serpentine under Varied Soil Treatments and Relevant Analysis of Microbial Community Structure

Carbon sink processes related to the weathering of silicate minerals are often accompanied by physical, chemical, and biological effects. In particular, plant-microbe synergistic effects are important for soil mineral weathering, but relevant correlation analyses and quantitative studies remain sparse. In this research, a standard serpentine test specimens (STSs) with specific specifications were used to study serpentine weathering under different environmental conditions (abiotic or biotic) and correlated it with the microbial community structure under the growth of Setaria viridis. The results showed that the environment with growing S. viridis had the strongest weathering capacity for STSs, which was 35 times higher than that of the abiotic environment group, and a significant increase in soil inorganic and organic carbon contents compared with the abiotic environment and the environment without plant growth. The bacteria with strong weathering ability were enriched in the soil of around STSs, such as Pseudomonas spp. and Sphingomonas spp. In addition, the fungal community of Ascomycetes is also heavily enriched, accelerating STSs weathering. The addition of bacterial agent (Bacillus subtilis) further promoted the STSs weathering under the growth conditions of S. viridis. The soil surrounding the buried STSs was also enriched with heavy metal tolerant Massilia spp. and disease suppressing Lysobacter spp., while the abundance of fungi functionally associated with pathotypes was reduced, thereby benefiting plant growth. This study provides basic information for the serpentine bio-weathering coupled with carbon sequestration by using plant-microbe synergistic effects.

Potential for synergism of sequential UV-NaClO disinfection on ARGs removal in municipal sewage: effectiveness, kinetics, and mechanisms

Conventional disinfection technologies have limitations in effectively addressing the challenges posed by the emerging pollutant of antibiotic resistance genes (ARGs). To reduce the risk of antibiotic resistance in wastewater treatment plant (WWTP) effluent, this study investigated the effectiveness of UV irradiation followed by NaClO (sequential UV-NaClO) disinfection in removing six classes and 18 subtypes of ARGs in the secondary effluent of a municipal WWTP. The study showed that ultraviolet (UV) disinfection could reduce tetracycline ARGs (TCs-ARGs) subtype tetQ by 0.98log, while it was ineffective in removing sulfonamide ARGs (SAs-ARGs). Sodium hypochlorite (NaClO) disinfection was very effective in removing ARGs. Increasing the disinfectant dosage is more effective than extending the disinfection time. The highest removal was observed for the SAs-ARGs subtype sul1 with 4.15log and the β-lactams-ARGs(β-LACs-ARGs) subtype blaCTX-M1 with 3.87log. Sequential UV-NaClO disinfection has the potential for synergistic effects in disinfection. Sequential UV-NaClO disinfection with a UV dosage of 15 mJ/cm2 and a NaClO dosage of 10mg/L can effectively remove 1.46log of the total 18 subtypes of ARGs, which is 0.73log higher than the removal achieved by standalone UV irradiation at a fluence of 100 mJ/cm2, and equivalent to the results obtained with NaClO disinfection alone at a dose of 30mg/L. Additionally, sequential UV-NaClO disinfection can reduce the repair efficiency of ARGs. The proposed modified Hom model can be used to analyze the kinetics of sequential UV-NaClO disinfection synergy. Analysis of microbial community structure and co-occurrence of ARGs showed synchronized and consistent removal of ARGs and their potential bacterial hosts. Sequential UV-NaClO disinfection could achieve 99% removal of more than half of the genera. Overall, our results indicate that sequential disinfection is a promising disinfection technology for disinfecting municipal wastewater and reducing the spread and transfer of ARGs.

Overload of dissolved organic matter (DOM) in riparian infiltration zone increasing the pollution risk of naphthalene, insight from the competitive inhibition of naphthalene biodegradation by DOM.

Riparian infiltration zones are crucial for maintaining water quality by reducing the aqueous concentrations of polycyclic aromatic hydrocarbons (PAHs) through adsorption and biodegradation within the aquatic ecosystem. Dissolved organic matter (DOM) are ubiquitous in riparian infiltration zones where they extensively engage in the adsorption and biodegradation of PAHs, thereby influencing PAHs natural attenuation potential within riparian infiltration zones. Few studies have explored the natural attenuation mechanisms of PAHs influenced by DOM in riparian infiltration zones. In this study, the natural attenuation mechanisms of naphthalene (a typical PAHs component), under the influence of DOM, were explored, based on a case riverside source area. Analysis of microbial community structures, and the electron acceptor (e.g., Fe(III), DO/NO3-, SO42-)/electron donor (naphthalene and DOM) concentration changes within the riparian infiltration zone revealed a competitive inhibition relationship between DOM and naphthalene during microbial metabolism. Biodegradation experiments showed that when the concentration of DOM is higher than 4.0 mg·L-1, it inhibits the biodegradation of naphthalene. DOM competitively inhibits the biodegradation of naphthalene through the following mechanisms: (i) triggering microbial antioxidative defense mechanisms, diminishing the available resources for microbial participation in naphthalene degradation; (ii) altering microbial community structure; (iii) modulating microbial EPS composition, reducing the efficiency of microorganisms in utilizing carbon sources; and (iv) inhibiting the expression levels of downstream genes involved in naphthalene degradation. The competitive inhibition constants of DOM with concentrations of 1.0, 2.0, 4.0, 8.0, and 16.0 mg·L-1 on naphthalene biodegradation are -2.0 × 10-3, -5.0 × 10-3,1.0 × 10-3, 4.0 × 10-4, and 1.0 × 10-4, respectively. These findings enhance understanding of PAHs attenuation in riparian infiltration zone, providing a basis for assessing and managing PAHs pollution risks during riparian extraction.

Synergy between Nitrogen Removal and Fermentation Bacteria Ensured Efficient Nitrogen Removal of a Mainstream Anammox System at Low Temperatures.

Simultaneous partial nitrification, anammox, denitrification, and fermentation (SNADF) is a novel process achieving simultaneous advanced sludge reduction and nitrogen removal. The influence of low temperatures on the SNADF reactor was explored to facilitate the application of mainstream anammox. When temperature decreased from 32 to 16 °C, efficient nitrogen removal was achieved, with a nitrogen removal efficiency of 81.9-94.9%. Microbial community structure analysis indicated that the abundance of Candidatus Brocadia (dominant anaerobic ammonia oxidizing bacteria (AnAOB) in the system) increased from 0.03% to 0.18%. The abundances of Nitrospira and Nitrosomonas increased from 1.6% and 0.16% to 2.5% and 1.63%, respectively, resulting in an increase in the ammonia-oxidizing bacteria (AOB) to nitrite-oxidizing bacteria (NOB) abundance ratio from 0.1 to 0.64. This ensured sufficient nitrite for AnAOB, promoting nitrogen removal. In addition, Candidatus Competibacter, which plays a role in partial denitrification, was the dominant denitrification bacteria (DNB) and provided more nitrite for AnAOB, facilitating AnAOB enrichment. Based on the findings from microbial correlation network analysis, Nitrosomonas (AOB), Thauera, and Haliangium (DNB), and A4b and Saprospiraceae (fermentation bacteria), were center nodes in the networks and therefore essential for the stability of the SNADF system. Moreover, fermentation bacteria, DNB, and AOB had close connections in substrate cooperation and resistance to adverse environments; therefore, they also played important roles in maintaining stable nitrogen removal at low temperatures. This study provided new suggestions for mainstream anammox application.

Long-chain fatty acids facilitate acidogenic fermentation of food waste: Attention to the microbial response and the change of core metabolic pathway under saturated and unsaturated fatty acids loading

Long-chain fatty acids (LCFAs) are recognized as a significant inhibitory factor in anaerobic digestion of food waste (FW), yet they are inevitably present in FW due to lipid hydrolysis. Given their distinct synthesis mechanism from traditional anaerobic digestion, little is known about the effect of LCFAs on FW acidogenic fermentation. This study reveals that total volatile fatty acids (VFAs) production increased by 9.98 % and 4.03 % under stearic acid and oleic acid loading, respectively. Acetic acid production increased by 20.66 % under stearic acid loading compared to the control group (CK). However, the LCFA stress restricted the degradation of solid organic matter, particularly under oleic acid stress. Analysis of microbial community structure and quorum sensing (QS) indicates that LCFA stress enhanced the relative abundance of Lactobacillus and Klebsiella. In QS system, the relative abundance of luxS declined from 0.157 % to 0.116 % and 0.125 % under oleic acid and stearic acid stress, respectively. LCFA stress limited the Autoinducer-2 (AI-2) biosynthesis, suggesting that microorganisms cannot use QS to resist the LCFA stress. Metagenomic sequencing showed that LCFA stress promoted acetic acid production via the conversion of pyruvate and acetyl-CoA to acetate. Direct conversion of pyruvate to acetic acid increased by 47.23 % compared to the CK group, accounting for the enhanced acetic acid production under stearic acid loading. The abundance of β-oxidation pathway under stearic acid loading was lower than under oleic acid loading. Overall, the stimulating direct conversion of pyruvate plays a pivotal role in enhancing acetic acid biosynthesis under stearic acid loading, providing insights into the effect of LCFA on mechanism of FW acidogenic fermentation.

Impacts of eutrophication on microbial community structure in sediment, seawater, and phyllosphere of seagrass ecosystems.

Seagrass-associated microbial communities play a crucial role in the growth and health of seagrasses. However, like seagrass meadows, seagrass-associated microbial communities are often affected by eutrophication. It remains unclear how eutrophication influences the composition and function of microbial communities associated with different parts of seagrass. We employed prokaryotic 16S rRNA gene high-throughput sequencing combining microbial community structure analysis and co-occurrence network analysis to investigate variances in microbial community compositions, potential functions and complexities across sediment, seagrass leaves, and seawater within different eutrophic areas of two adjacent seagrass meadows on Hainan Island, China. Our results indicated that microbial diversity on seagrass leaves was significantly lower than in sediment but significantly higher than in seawater. Both sediment and phyllosphere microbial diversity showed no significant difference between the highly eutrophic and less eutrophic sites in each lagoon. However, sediment microbial diversity was higher in the more eutrophic lagoon, while phyllosphere microbial diversity was higher in the less eutrophic lagoon. Heavy eutrophication increased the relative abundance of phyllosphere microorganisms potentially involved in anaerobic metabolic processes, while reducing those responsible for beneficial functions like denitrification. The main factor affecting microbial diversity was organic carbon in seawater and sediment, with high organic carbon levels leading to decreased microbial diversity. The co-occurrence network analysis revealed that heavy eutrophication notably reduced the complexity and internal connections of the phyllosphere microbial community in comparison to the sediment and seawater microbial communities. Furthermore, ternary analysis demonstrated that heavy eutrophication diminished the external connections of the phyllosphere microbial community with the sediment and seawater microbial communities. The pronounced decrease in biodiversity and complexity of the phyllosphere microbial community under eutrophic conditions can lead to greater microbial functional loss, exacerbating seagrass decline. This study emphasizes the significance of phyllosphere microbial communities compared to sediment microbial communities in the conservation and restoration of seagrass meadows under eutrophic conditions.

Performance of pharmaceutical products removal in a bioelectrochemical system at low temperatures and changes in microbial communities and antibiotic resistance genes.

Biological methods do not effectively remove pharmaceutical products (PPs) and antibiotic resistance genes (ARGs) from wastewater at low temperatures, leading to environmental pollution. Therefore, anaerobic-aerobic-coupled upflow bioelectrochemical reactors (AO-UBERs) were designed to improve the removal of PPs at low temperatures (10 ± 2 °C). The result shows that diclofenac (DIC) and ibuprofen (IBU) removals in the system with aerobic anodic and anaerobic cathodic chambers were 91.7% and 94.7%, higher than that in the control system (12.2 ± 1.5%, 36.5 ± 5.9%), and aerobic zone favors DIC and IBU removal; fluoroquinolone antibiotics (FQs) removals in the system with aerobic cathodic and anaerobic anodic chambers were 17.5-22.4% higher than that in the control system (9.1-22.4%), and anaerobic zone favors FQs removal. Analysis of microbial community structure and ARGs showed that different electrotrophic microbes (Flavobacterium, Acinetobacter, and Delftia) with cold-resistant ability to degrade PPs were enriched in different electrode combinations, and the aerobic cathodic chambers could remove certain ARGs. These results showed that AO-UBERs under intermittent electrical stimulation mode are an alternative method for the effective removal of PPs and ARGs at low temperatures.

Effects of engineering injection and supplement mode of in-situ biogeochemical transformation enhancement EVO-FeSO4 on the remediation of tetrachloroethylene contaminated aquifer

Traditional in situ biogeochemical transformation suffers from competition among crucial microorganisms and inadequate formation of reactive minerals, thus leading to the accumulation of toxic intermediates. In this study, three regulation schemes were proposed to solve these problems from the perspective of engineering mode. Results showed intermittent injection mode effectively reduced the accumulation of toxic intermediates but the reduction rate of tetrachloroethylene was decreased. And periodical supplementation of carbon and sulfur sources accelerated the removal of tetrachloroethylene but failed to reduce the accumulation of toxic products. While, regular supplementation of sulfate effectively weakened the competition of methanogens and increased the iron sulfide proportion on the surface of the minerals, thus reducing the accumulation of toxicity. Based on the results, this study obtained an effective engineering approach for practical site application. In addition, the main forms of active minerals capable of β-eliminating contaminants during biogeochemical transformation were identified in this study, including FeS, FeS2, and Fe3S4. Furthermore, the engineered regulatory mechanism of this study was summarized through the analysis of microbial community structure and mineral morphology. The amendment promotes the production of minerals and thus controls the transformation pathway of contaminants by altering the abundance of sulfate-reducing bacteria and dissimilatory iron reducing bacteria. This mechanism can provide a basis for subsequent theoretical studies.

Effects of AMF on Maize Yield and Soil Microbial Community in Sandy and Saline Soils.

This study aimed to investigate the effects of applying arbuscular mycorrhizal fungi (AMF) on maize root growth and yield formation under different soil conditions. This study was conducted under sandy soil (S) and saline-alkali soil (Y), with treatments of AMF application (AM) and no AMF application (CK). The root characteristics, yield, and quality of maize were measured. High-throughput sequencing technology was employed to assess the impact of AMF on the soil microbial community structure, and the correlation between soil microbes and soil physicochemical properties was elucidated. The results show that under both sandy and saline-alkali soil conditions, AMF application significantly enhanced maize root growth, yield, grain quality, and soil available nitrogen (AN), available phosphorus (AP), and available potassium (AK) contents compared to the CK treatment. Soil microbial Alpha diversity analysis indicated that AMF application effectively increased soil microbial diversity and richness. Principal coordinate analysis (PCoA) and microbial community structure analysis revealed significant differences in bacterial communities between AM treatment in sandy soil (SAM) and CK in sandy soil (SCK), and significant differences in both bacterial and fungal communities between AM treatment in saline-alkali soil (YAM) and CK in saline-alkali soil (YCK). Furthermore, significant correlations between microbial communities and soil physicochemical properties were found, such as AN, AP, AK, soil salinity (SS), and organic matter (OM) content. AMF application had a greater impact on bacterial communities than on fungal communities. This study demonstrated that the use of AMF as a bio-fungal fertilizer was effective in improving spring maize yields, especially in terms of yield increase and quality stability in sandy and saline soils, thereby contributing to safe and sustainable cropping practices.

Aerobic Granular Sludge Treatment of Piggery Wastewater: Solution to the Problem of Non-Filamentous Bulking and Analysis of Microbial Community Structure in Practical Application

Aerobic Granular Sludge Treatment of Piggery Wastewater: Solution to the Problem of Non-Filamentous Bulking and Analysis of Microbial Community Structure in Practical Application

Unveiling microbial community structure and metabolic pathway over carbon cloth-titanium nitride-polyaniline biocathode for effective dichloromethane transformation

Chlorinated volatile organic compounds (Cl–VOCs) have dramatically biotoxicity and environmental persistence due to the presence of chlorine atoms, seriously jeopardizing ecological security and human health. Dichloromethane (DCM) as a model pollutant, is widely applied in solvents, extractants and cleaning agents in the pharmaceutical, chemical and food industries. In this study, highly biocompatible and conductive carbon cloth-titanium nitride-polyaniline (CC–TiN-PANI) bioelectrodes were obtained for DCM degradation in microbial electrolysis cell (MEC). The good adhesion of TiN and PANI on the electrode surface was demonstrated. The degradation kinetics were fitted by the Haldane model, compared to the CC bioelectrode (0.8 h−1), the proportion of maximum degradation rates to half-saturation concentration (Vmax/Km) of CC-TiN (1.4 h−1) and CC-TiN-PANI (2.2 h−1) bioelectrodes were enhanced by 1.8 and 2.8 times, respectively. Microbial community structure analysis illuminated that the dominant genera on the biofilm were Alicycliphilus and Hyphomicrobium, and the abundance was enhanced significantly with the modification of TiN and PANI. The dechlorination of DCM to formaldehyde could be catalyzed by DCM dehalogenase (DcmA) or by haloalkane dehalogenase (DhlA). And further oxidized to formate: 1) direct catalyzed by formaldehyde dehydrogenase (FdhA); 2) conjugated with glutathione by S-(hydroxymethyl)-glutathione synthase (Gfa), S-(hydroxymethyl)-glutathione dehydrogenase (FrmA) and S-formyl-glutathione hydrolase (FrmB); 3) conjugation with tetrahydrofolate (H4F) and/or tetrahydromethanopterin.

Effects of reduced graphene oxide nanomaterials on transformation of 14C-triclosan in soils

Increasing use and release of graphene nanomaterials and pharmaceutical and personal care products (PPCPs) in soil environment have polluted the environment and posed high ecological risks. However, little is understood about the interactive effects and mechanism of graphene on the behaviors of PPCPs in soil. In the present study, the effects of reduced graphene oxide nanomaterials (RGO) on the fate of triclosan in two typical soils (S1: silty loam; S2: silty clay loam) were investigated with 14C-triclosan, high-resolution mass spectrometry, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), density functional theory (DFT) calculations, and microbial community structure analysis. The results showed that RGO prolonged the half-life of triclosan by 23.6–51.3 %, but delayed the formation of transformed products such as methyl triclosan and dechlorinated dimer of triclosan in the two typical soils. Mineralization of triclosan to 14CO2 was inhibited by 48.2–79.3 % in 500 mg kg−1 RGO in comparison with that in the control, whereas the bound residue was 54.2–56.4 % greater than the control. RGO also reduced the relative abundances of triclosan-degrading bacteria (Pseudomonas and Sphingomonas) in soils. Compared to silty loam, RGO more effectively inhibited triclosan degradation in silty clay loam. Furthermore, the DFT calculations suggested a strong association of the adsorption of triclosan on RGO with the van der Waals forces and π-π interactions. These results revealed that RGO inhibited the transformation of 14C-triclosan in soil through strong adsorption and triclosan-degrading bacteria inhibition in soils. Therefore, the presence of RGO may potentially enhance persistence of triclosan in soil. Overall, our study provides valuable insights into the risk assessment of triclosan in the presence of GNs in soil environment.

Microbial community changes and metabolic pathways analysis during waste activated sludge and meat processing waste anaerobic co-digestion

Waste activated sludge (WAS) and meat processing waste (MPW) were acted as co-substrates in anaerobic co-digestion (AcD), and biochemical methane potential (BMP) test was carried out to investigate the methane production performances. Microbial community structure and metabolic pathways analyses were conducted by 16S rRNA high-throughput sequencing and functional prediction analysis. BMP test results indicated that AcD of 70% WAS+30% MPW and 50% WAS+50% MPW (VS/VS) could significantly improve methane yield to 371.05 mL/g VS and 599.61 mL/g VS, respectively, compared with WAS acting as sole substrate (191.87 mL/g VS). The results of microbial community analysis showed that Syntrophomonas and Petrimonas became the dominant bacteria genera, and Methanomassiliicoccus and Methanobacterium became the dominant archaea genera after MPW addition. 16S functional prediction analysis results indicated that genes expression of key enzymes involved in syntrophic acetate oxidation (SAO), hydrogenotrophic and methylotrophic methanogenesis were up-regulated, and acetoclastic methanogenesis was inhibited after MPW addition. Based on these analyses, it could be inferred that SAO combined with hydrogenotrophic and methylotrophic methanogenesis was the dominant pathway for organics degradation and methane production during AcD. These findings provided systematic insights into the microbial community changes and metabolic pathways during AcD of WAS and MPW.

Sulfur autotrophic electrodialysis ion exchange membrane bioreactor (SEDIMB) for nitrate removal in water: Synergism and adaptability of electrodialysis and sulfur autotrophy

In this study, the novel sulfur autotrophic electrodialysis ion-exchange membrane bioreactor (SEDIMB) with high denitrification performance was developed without the addition of carbon source. Sulfur autotrophic denitrification occurs at the same time of nitrate enrichment by electric field to achieve harmless nitrate transformation in water. The final nitrate concentration in water chamber was 2.16 mg-N/L (removal efficiency of 94.49 %) at an initial nitrate concentration of 40 mg-N/L, with the maximum nitrate concentration in biological chamber of 4.09 mg-N/L. Nitrate removal in water chamber of the SEDIMB conformed to the first-order kinetic model (R2 = 0.98) and reaction rate constant K1 = 0.0030 (1/min). The effect of environmental variables (i.e., voltage, initial nitrate concentration and water body) on the SEDIMB denitrification performance was investigated. Increasing voltage could promote nitrate migration in water chamber, and when the voltage was 7 V, initial nitrate concentrations of 20 ∼ 60 mg-N/L was effectively removed (all > 93.54 %). Moreover, the change of water body (i.e., tap water, lake water and deionized water) did not affect denitrification performance of SEDIMB. Microbial community structure analysis indicated that Betaproteobacteria were dominant in the SEDIMB. Membrane characterizations (ATR-IR, SEM and CLSM) confirmed that the bacteria in biological chamber tended to accumulate and grow on one side of the anion exchange membrane (AEM), while could not affect the selective permeability of AEM.