Enantioselective Research Articles

Cavity Catalysis of an Enantioselective Reaction under Vibrational Strong Coupling.

Strong light-matter interaction is emerging as an exciting tool for controlling chemical reactions. Here, we demonstrate an L-proline-catalyzed direct asymmetric Aldol reaction under vibrational strong coupling. Both the reactants (4-nitrobenzaldehyde and acetone) carbonyl bands are coupled to an infrared photon and react in the presence of L-proline. The reaction mixture is eluted from the cavity, and the conversion yields and enantiomeric excess are quantified using NMR and chiral HPLC. The conversion yields increase by up to 90 % in ON-resonance conditions. Interestingly, a large increase in the conversion yield does not affect the enantiomeric excess. Further control experiments were carried out by varying the temperature, and we propose that the rate-limiting step may not be the deciding factor in enantioselectivity. Whereas the formation of the enamine intermediate is modified by cavity coupling experiments. For this class of enantioselective reactions, strong coupling does not change the enantiomeric excess, possibly due to the large energy difference in chiral transition states. Strong coupling can boost the formation of enamine intermediate, thereby favouring the product yield. This gives more hope to test polaritonic chemistry based on enantioselective reactions in which the branching ratios can be controlled.

Synthesis of Enantiopure (S)-Atenolol by Utilization of Lipase-Catalyzed Kinetic Resolution of a Key Intermediate.

(S)-Atenolol ((S)-2-(4-(2-Hydroxy-3-(isopropylamino)propoxy)phenyl)acetamide) has been synthesized in >99% enantiomeric excess (ee) with the use of Candida antarctica lipase B from Syncozymes (Shanghai, China), in a kinetic resolution of the corresponding racemic chlorohydrin. A catalytic amount of base was used in deprotonation of the phenol building block. The enantiopurity of the chlorohydrin building block remained unchanged upon subsequent amination to yield the final drug. All four steps in the synthesis protocol have been optimized compared to previously reported methods, which makes this new protocol more sustainable and in accordance with green chemistry principles. The overall yield of (S)-atenolol was 9.9%, which will be further optimized.

Chiral Recognition of Chiral (Hetero)Cyclic Derivatives Probed by Tetraaza Macrocyclic Chiral Solvating Agents via 1H NMR Spectroscopy.

In the field of chiral recognition, chiral cyclic organic compounds, especially heterocyclic organic compounds, have attracted little attention and have been rarely studied as chiral substrates by means of 1H NMR spectroscopy. In this paper, enantiomers of thiohydantoin derivatives, representing typical five-membered N,N-heterocycles, have been synthesized and utilized for assignment of absolute configuration and analysis of enantiomeric excess. All enantiomers have been successfully differentiated with the assistance of novel tetraaza macrocyclic chiral solvating agents (TAMCSAs) by 1H NMR spectroscopy. Surprisingly, unprecedented nonequivalent chemical shift values (up to 2.052 ppm) of the NH proton of substrates have been observed, a new milestone in the evaluation of enantiomers. To better understand the intermolecular interactions between host and guest, Job plots and theoretical calculations of (S)-G1 and (R)-G1 with TAMCSA 1a were investigated and revealed significant geometric differentiation between the diastereomers. In order to evaluate practical applications of the present systems in analyzing optical purity of chiral substrates, enantiomeric excesses of a typical substrate (G1) with different optical compositions in the presence of a representative TAMCSA (1a) can be accurately calculated based on the integration of the NH proton's signal peaks. Importantly, this work provides a significant breakthrough in exploring and developing the chiral recognition of chiral heterocyclic organic compounds by 1H NMR spectroscopy.

Perovskite-Supramolecular Co-Assembly for Chiral Optoelectronics.

Hybrid inorganic-organic perovskites with chiral response and outstanding optoelectronic characteristics are promising materials for next-generation spin-optoelectronics. In particular, two-dimensional (2D) perovskites are promising chiroptical candidates due to their unique ability to incorporate chiral organic cations into their crystal structure, which imparts chirality. To enable their practical applications in chiral optoelectronic devices, it is essential to achieve an anisotropy factor (gCD ∼ 2) in chiral 2D perovskites. Currently, chiral 2D perovskites exhibit a relatively low gCD of 3.1 × 10-3. Several approaches have been explored to improve the chiral response of chiral 2D perovskites, including tailoring the molecular structure of chiral cations and increasing the degree of octahedral tilting in the perovskite lattice. However, current methods for chiral amplification have only achieved a moderate enhancement of gCD by 2-fold and are often accompanied by undesirable shifts or inversion in the circular dichroism spectra. There is a need for a more efficient approach to enhancing the chirality in 2D perovskites. Here, we report an innovative coassembly process that allows us to seamlessly grow chiral 2D perovskites on supramolecular helical structures. We discover that the interactions between perovskites and chiral supramolecular structures promote crystal lattice distortion in perovskites, which improves the chirality of 2D perovskites. Additionally, the obtained hierarchical coassembly can effectively harness the structural chirality of the supramolecular helices. The multilevel chiral enhancement leads to an enhancement in gCD by 2.7-fold without compromising the circular dichroism spectra of 2D perovskites.

Asymmetric Synthesis of 3,4‐Dihydroquinolin‐2‐ones via Organocatalytic [4+2]‐Cyclization of 2‐Amino‐β‐nitrostyrenes with Azlactones

AbstractDihydroquinolin‐2‐ones, recognized for their bioactive properties, feature a six‐membered structure with nitrogen‐containing heterocycles. A method has been developed for synthesizing enantioenriched 3,4‐dihydroquinoline‐2‐one derivatives. This approach utilizes an asymmetric [4+2]‐cyclization process, combining 2‐amino‐β‐nitrostyrenes with azlactones, and is facilitated by a bifunctional squaramide‐based organocatalyst. This process has enabled the creation of chiral 3,4‐dihydroquinoline‐2‐ones with complex structures, including chiral tetrasubstituted carbon stereocenters, delivering corresponding products in 26–95% yield with a diastereomeric ratio of 1.2:1–19:1 and 52–97 ee.

Enantioselective Ring-Closing Aminomethylamination of Allylic Aminodienes with Aminals Triggered by C-N Bond Metathesis.

A conceptually novel strategy utilizing a cyclopalladated complex as an electrophile to activate the C-N bond for the C-N bond metathesis between allylamines and aminals is developed, which enables an efficient ring-closing aminomethylamination of allylic aminodienes and aminals. The reaction proceeds under mild reaction conditions and displays a remarkable scope. Utilizing a modified Trost-type diphosphine as the ligand, this method enables the efficient synthesis of 5-10-membered aminoallylated chiral N-heterocycles in good yields with high enantiomeric excess values.

Bifunctional iminophosphorane organocatalyst with additional hydrogen bonding: Calculations predict enhanced catalytic performance in a michael addition reaction

A new iminophosphorane-thiourea superbase was rationally designed and investigated as an organocatalyst for the enantioselective Michael addition reaction of nitromethane to 4-phenylbut-3-en-2-one. Starting from an iminophosphorane-thiourea organocatalyst structure already known, we have used theoretical calculations to determine the structures of transition states involved in the carbon-carbon bond formation step and carried out structural modifications to accelerate the reaction rate and to increase the enantioselectivity. The effective structural modification was adding a rigid hydroxyl group able to make an additional hydrogen bond to the transition state, producing a substantial decrease of the ΔG‡ by 7 kcal mol−1. The enantiomeric excess is predicted to be above of 97% using the reliable M06-2X and ωB97M − V functionals. The determination of the complete reaction mechanism and free energy profile was followed by a detailed microkinetic analysis. The present study points out a new direction for structural modifications on this kind of organocatalyst.

Optical Activity and Excitonic Characteristics of Chiral CdSe Quantum Dots.

Introduction of chirality to colloidal semiconductor quantum dots (QDs) triggers a chiroptical effect. However, there remains a knowledge gap in the mechanism of chirality transfer and amplification from molecules to QDs. By time-dependent density functional theory calculations combined with a correlated electron-hole picture, we explored the chiroptical activity of CdSe QDs decorated with different chiral monocarboxylic acids from an excitonic perspective. Our calculations showed strong circular dichroism (CD) signals in the visible region for the chiral CdSe QDs. The excitonic states with large CD originate from QDs, while the chiral molecules break the orthogonality between electric and magnetic transition dipoles, which synergistically facilitates the prominent dissymmetric effect. The considered monocarboxylic acid chiral molecules all favor the bidentate adsorption configuration of the carboxyl group on the CdSe surface, endowing an identical CD signature but distinct excitonic characteristics. These findings are crucial for the regulation of chirality and excitons in semiconductor QDs to develop excitonic devices.

Isohexide-Based Tunable Chiral Platforms as Amide- and Thiourea-Chiral Solvating Agents for the NMR Enantiodiscrimination of Derivatized Amino Acids.

New arylamide- and arylthiourea-based chiral solvating agents (CSAs) were synthesized starting from commercially available isomannide and isosorbide. The two natural isohexides were transformed into the three amino derivatives, having isomannide, isosorbide, and isoidide stereochemistry, then the amino groups were derivatized with 3,5-dimethoxybenzoyl chloride or 3,5-bis(trifluoromethyl)phenyl isothiocyanate to obtain the CSAs. Bis-thiourea derivative containing the 3,5-bis(trifluoromethyl)phenyl moiety with exo-exo stereochemistry was remarkably efficient in the differentiation of NMR signals (NH and acetyl) of enantiomers of N-acetyl (N-Ac) amino acids in the presence of 1,4-diazabicyclo[2,2,2]octane (DABCO). Nonequivalences in the ranges of 0.104-0.343 ppm and 0.042-0.107 ppm for NH and acetyl groups, respectively, allowed for very accurate enantiomeric excess determination, and a reliable correlation was found between the relative positions of signals of enantiomers and their absolute configuration. Therefore, a complete stereochemical characterization could be performed. Dipolar interactions detected in the ternary mixture CSA/N-Ac-valine/DABCO led to the identification of a different interaction model for the two enantiomers, involving the formation of a one-to-one substrate/CSA complex for (S)-N-Ac-valine and a one-to-two complex for (R)-N-Ac-valine, as suggested by the complexation stoichiometry.

Three-Dimensional Homochiral Covalent Organic Frameworks with Intrinsic Chiral qzd Topology.

Although a variety of chiral porous framework materials have been reported, there are few examples known to combine molecular chirality, helicity, and three-dimensional (3D) intrinsically chiral topology in one structure, which is beneficial for chirality transfer and amplification. Here, we report the synthesis of the first two 3D covalent organic frameworks (COFs) with an intrinsic chiral qzd topology, which exhibit unusual integration of various homochiral and homohelical features. By imine condensation of 4-connected porphyrin tetraamines and 2-connected enantiopure diene dialdehyde, we prepared two isostructural COFs with a noninterpenetrated qzd topology. The specific geometry and conformation flexibility of the V-shaped diene linker control the alignment of square-planar porphyrin units with rotational linkages and facilitate the creation of homochiral extended porous structures that feature a helical arrangement of porphyrins. Post-synthetic metalation of CCOF 23 with Rh(I) affords a heterogeneous catalyst for the asymmetric Michael addition reaction of aryl boronic acids to 2-cyclohexenone, which shows higher enantioselectivities compared to their homogeneous counterparts, presumably due to the confined effect of helical channels. This finding will provide an impetus to explore multichirality materials, offering new insights into the generation and control of helicity, homochirality, and enantioselectivity in the solid state.

A chiral zeolite material with improved enantioselective catalytic properties prepared from readily accessible ephedrine alkaloids

Substituted-benzyl-containing N-methyl-ephedrinium derivatives (BMEP), prepared from the highly-accessible (1R,2S)- or (1S,2R)-ephedrine alkaloids, have been found to act as efficient structure-directing agents for the synthesis of chiral zeolite GTM-4 with –ITV framework structure, promoting the enantio-enrichment in one of the chiral crystalline polymorphs as a function of the organic handedness. Results of a systematic variation of substituents in the benzyl ring attached to the ephedrine core (with methyl-, fluoro- or chloro-groups in the different positions of the aromatic ring) revealed that F-containing SDAs brought about an improvement in the structure-directing ability toward the –ITV framework, giving asymmetric zeolite acid-catalysts that yielded notable enantiomeric excesses in the range of 40–45 % for the trans-stilbene oxide ring-opening with 1-butanol. Interestingly, the incorporation of a methyl group in ortho-position (oMBMEP) had a double positive effect: on the one hand, this SDA prevented the crystallization of the competing BEC phase, allowing the crystallization of the -ITV structure at higher temperature and with higher crystallinity, and on the other, it drove to GTM-4 asymmetric catalysts that yielded enantiomeric excesses up to 60 %, resulting in the chiral GTM catalysts with the best enantioselective properties found so far. Remarkably, our catalytic results show the same chiral activity (in terms of zeolite handedness) for GTM-4 materials prepared from benzyl-containing (1S,2S)-N-methyl-pseudoephedrinium (BMPS) and (1S,2R)-N-methyl-ephedrinium (BMEP) derivatives, thus suggesting that the host-guest transfer of chirality during crystallization with these chiral organic aromatic agents is imposed by the absolute configuration of the C1 atom to which the OH group is attached. The relatively high enantiomeric excess of 60 % achieved, combined with the high accessibility of the ephedrine chiral precursors used for the synthesis that enables the production of both crystalline handedness of the –ITV framework, bring these materials closer to a potential application as heterogeneous asymmetric catalysts for the synthesis of chiral compounds of interest.

New Strategy for the Synthesis of Some Valuable Chiral 1,3-Diols with High Enantiomeric Purity: New Organocatalyst, Asymmetric Aldol Reaction, and Reduction.

Chiral 1,3-diols are highly valuable molecules used in industries such as pharmaceuticals, cosmetics, and agriculture. Therefore, in this study, a new strategy was developed to synthesize enantiomerically pure (>99% ee) 1,3-diols. New chiral 1,3-diols (5a-5q) with high enantiomeric purity were synthesized from aldol products chiral 1,3-keto alcohols (4a-4q), which are aldol products with different structures. Chiral 1,3-keto alcohols (4a-4q) were synthesized by a new asymmetric aldol method in the first step. This method was developed using a new proline-derived organocatalyst (3g) and Cu(OTf)2 as an additive in DMSO-H2O for the first time. Almost >99% ee was obtained using our developed aldol procedure. In the second step, original chiral diols (5a-5q) of high enantiomeric purity were obtained by asymmetric reduction of chiral keto alcohols with chiral oxazaborolidine reagents. In this way, a two-step asymmetric reaction was developed for chiral 1,3-diol enantiomers with high enantiomeric purity. The structures of all the original chiral compounds obtained were elucidated by infrared and nuclear magnetic resonance spectroscopy, mass spectrometry, and elemental analysis methods. Their enantiomeric excesses were determined by the chiral high-performance liquid chromatography method. Both keto alcohols and their corresponding chiral diols synthesized can be used as chiral starting materials and chiral source materials or intermediates in the synthesis of many biologically active molecules, or they can be used as chiral ligands in asymmetric synthesis, serving as organocatalysts.

Asymmetric Diels–Alder reaction of chalcone and isoprene mediated by titanium-based complexes

The asymmetric Diels–Alder reaction of chalcone and isoprene has been accomplished by use of chiral titanium complexes. Notably, an enantiomeric excess as high as 61% and a regioselectivity of 95% have been achieved. The preparation of the chiral titanium complexes is simple and does not require the pre-installation of a chiral auxiliary. This study represents the first example of asymmetric Diels–Alder reaction between chalcone and isoprene.

Click-imprinted furan-modified poly(acrylonitrile-co-divinylbenzene for S-naproxen recognition

Naproxen (NX) drug exists in two R- and S-enantiomers, requiring enantioseparation for effective pharmacological effects. Herein, a new S-NX enantioselective poly(acrylonitrile-co-divinylbenzene) (CPAN)-based polymeric sorbent was successfully synthesized and used to separate the NX racemate. First, low crosslinked CPAN was prepared in microparticles via suspension polymerization. Furan-2-ylmethylhydrazine (Fu-Hyd) was then interacted with the abundant nitrile units. The resulting cationic furan-hydrazidine-functionalized polymeric particles (FUH-P) were loaded with the anionic S-NX, which was then imprinted via post-crosslinking upon treatment with bis-maleimidoethane (BME) dienophile crosslinker that interacted with the conjugate diene system of the already inserted furan units via Diels-Alder cycloaddition reaction. Using acidic elution, the S-NX enantiomers were then freed from the polymer particle and left their enantio-selective receptor-like active sites in the structure of the imprinted polymeric particles (S-NX-P). FTIR, 13C NMR, and XRD techniques were utilized for investigating the obtained polymers. Also, the surface morphologies of the sorbent materials were visualized using SEM. The best conditions for enantio-selective uptake showed that 235 mg/g of S-NX could be adsorbed at pH 7. The enantiomeric separation of the NX racemic mixture was effectively achieved with an enantiomeric excess (ee) of 99% for R-NX upon the initial solution run and 93% for S-NX upon the elution step.

Optically Pure Calixarenyl Phosphine via Stereospecific Alkylation on Evans' Oxazolidinone Moiety.

A convenient protocol for the synthesis of 25,26,27-tribenzoyl-28-[((S)-1-diphenylphos- phanyl-propan-2-yl)oxy]-calix[4]arene via stereospecific methylation on Evans' oxazolidinone moiety was reported. According to the 13C NMR analysis of this phosphine, the calix[4]arene skeleton adopted a 1,3-alternate conformation. The latter conformation of the macrocycle and the (S)-chirality of the carbon atom bearing the methyl substituent were confirmed by a single-crystal X-ray diffraction study. After coordination of the phosphinated ligand to the dimeric [RuCl2(p-cymene)]2 organometallic precursor, the resulting arene-ruthenium complex was tested in the asymmetric reduction of acetophenone and alcohol was obtained with modest enantiomeric excess.

An innovative temperature control strategy to improve optically pure L-lactic acid production from food waste

Fermentation of food waste to lactic acid (LA) is a strategy for resource recovery. However, the poor yield and optical activity (OA) of L-lactic acid (L-LA) are major bottlenecks for such efforts. This study focuses on enhancing L-LA yield and optical purity from the food waste without sterilization and inoculation at pilot-scale. First, the effects of temperature on LA production were explored. A higher LA yield but lower purity was obtained under mesophilic conditions, whereas the opposite results were represented at high temperature. On the basis of these findings, a novel two-stage temperature regulation strategy was developed that combined the benefits of both temperature conditions. This strategy not only ensured a L-LA yield of 0.371 g/g volatile solid, but also achieved a high optical purity of 98.0%. The underlying mechanism is that high temperature could enrich L-lactic acid bacteria (LAB) and inhibit LAB producing both L- and D-LA. Overall, this innovative strategy may be well-suited for generating optically pure L-LA from food waste fermentation.

Simultaneous identification and enantioseparation of ofloxacin and duloxetine without the single standard and computational calculation of their inclusion complexes.

Given the markedly different pharmacological activities between enantiomeric isomers, it is crucial to encourage the stereoselective determination of chiral drugs in the biological and pharmaceutical fields, and the combination of drugs makes this analysis more complicated and challenging. Herein, a capillary electrophoresis (CE) method for the enantioseparation of ofloxacin and duloxetine was established, enabling the simultaneous identification of four isomers in nonracemic mixtures with enantiomeric excess (ee%) values exceeding 5%. This was achieved through the integration of theoretical simulation and electron circular dichroism (ECD), all without reliance on individual standards. Molecular modeling explained and verified the migration time differences of these isomers in electrophoretic separation. Moreover, the correlation coefficients (R2 ) between the enantiomeric peak area differentials and ee% were both above 0.99. Recovery rates were quantified using bovine serum as the matrix, with results ranging from 93.32% to 101.03% (RSD = 0.030) and 92.69% to 100.52% (RSD = 0.028) for these two chiral drugs at an ee value of 23.1%, respectively.

Symmetry breaking and chiral amplification in prebiotic ligation reactions.

The single chirality of biological molecules is a signature of life. Yet, rationalizing how single chirality emerged remains a challenging goal1. Research has commonly focused on initial symmetry breaking and subsequent enantioenrichment of monomer building blocks-sugars and amino acids-that compose the genetic polymers RNAand DNA as well as peptides. If these building blocks are only partially enantioenriched, however, stalling of chain growth may occur, whimsically termed in the case of nucleic acids as "the problem of original syn"2. Here, in studying a new prebiotically plausible route to proteinogenic peptides3-5, we discovered that the reaction favours heterochiral ligation (that is, the ligation of L monomers with D monomers). Although this finding seems problematic for the prebiotic emergence of homochiral L-peptides, we demonstrate, paradoxically, that this heterochiral preference provides a mechanism for enantioenrichment in homochiral chains. Symmetry breaking, chiral amplification and chirality transfer processes occur for all reactants and products in multicomponent competitive reactions even when only one of the molecules in the complex mixture exhibits an imbalance in enantiomer concentrations (non-racemic). Solubility considerations rationalizefurther chemical purification and enhanced chiral amplification. Experimental data and kinetic modelling support this prebiotically plausible mechanism for the emergence of homochiral biological polymers.

Covalent Organic Frameworks with Tunable Chirality for Chiral-Induced Spin Selectivity.

Chiral covalent organic frameworks (CCOFs) have attracted extensive interest for their potential applications in various enantioselective processes. However, the exploitation of chirality-induced spin selectivity (CISS) that enables a new technology for the injection of spin polarized current without the need for a permanent magnetic layer within CCOFs remains a largely untapped area of research. Here, we demonstrate that, for the first time, COFs can be an attractive platform to develop spin filter materials with efficient CISS. This facilitates the design and synthesis of a new family of Zn(salen)-based 2D CCOFs, namely, CCOFs-9-12, by imine condensation of chiral 1,2-diaminocyclohexane and tri- or tetra(salicylaldehyde) derivatives. CCOF-9, distinguished by its unique C2 symmetric "armchair" tetrasubstituted pyrene conformation, exhibits the most pronounced chirality among these materials and serves as a solid-state host, enabling the enantioselective adsorption of racemic drugs with an enantiomeric excess (ee) of up to 97%. After substituting diamagnetic zinc(II) ions for paramagnetic cobalt(II), the resulting CCOF-9-Co not only retains its high crystallinity, porosity, and exceptional chirality but also exhibits enhanced conductivity, a crucial factor for the effective observation of CISS. Magnetic conductive atomic force microscopy showed that CCOF-9-Co exhibited a remarkable CISS effect with up to an 88-94% spin polarization ratio. This phenomenon is further confirmed by the increased intensity in the magnetic circular dichroism (MCD) when CCOF-9-Co is under an external magnetic field. This work therefore shows the tremendous potential of CCOFs for controlling spin selectivity and will stimulate the creation of new types of crystalline polymers with strong CISS effects for spin filters.

A Multi-response Nonlinear Programming Model with an Inscribed Design to Optimize Bioreduction Conditions of (S)-phenyl (pyridin-2-yl)methanol by Leuconostoc pseudomesenteroides N13

AbstractAsymmetric bioreductions have the potential to synthesize chiral alcohols when catalyzed by biocatalysts. Nevertheless, the (S)-phenyl (pyridin-2-yl)methanol ((S)-2) analgesic synthesis poses significant challenges concerning unsatisfactory substrate amount and production method. Thus, this study proposes an inscribed design-focused multi-response nonlinear optimization model for the asymmetric reduction of the phenyl(pyridin-2-yl)methanone (1) with Leuconostoc pseudomesenteroides N13 biocatalyst. From the novel inscribed design-focused multi-response nonlinear optimization model, optimization conditions of the reaction, such as pH = 6, temperature = 29 °C, incubation time = 53 h, and agitation speed = 153 rpm, were found. Also, the reaction conversion was predicted to be 99%, and the product of the enantiomeric excess (ee) was 98.4% under the obtained optimization conditions. (S)-2 was obtained with 99% ee, 99% conversion, and 98% yield while performing a validation experiment using the determined optimized conditions. In addition, 1 with the amount of 11.9 g was converted entirely to (S)-2 (11.79 g, 98% isolated yield) on a high gram scale. Also, this study is noted as the first example of the gram-scale production of (S)-2 using an optimization strategy and biocatalyst. Further, the applicability of the inscribed design-focused optimization model in biocatalytic reactions has been demonstrated and provides an effective process for the analgesic synthesis of (S)-2, which is a green, cost-effective method of producing chiral aryl heteroaryl methanol.