Amphiphilic Polymer Conetworks Research Articles

Optical biochemical sensor for determining hydroperoxides in nonpolar organic liquids as archetype for sensors consisting of amphiphilic conetworks as immobilisation matrices

This paper reports the successful design of a prototype of an optical biochemical sensor for the determination of hydroperoxides in nonpolar organic liquids. The sensor consists of a matrix of an amphiphilic polymer conetwork (APCN), a novel class of very promising polymeric materials for easy preparation of biochemical sensor matrices. APCNs are characterised by nanoscopic phase separation between the hydrophilic and the hydrophobic phases. For medium ratios of conetwork composition, the domains of both phases are interconnected both on the surface of the conetworks and throughout the bulk. The APCNs have peculiar swelling properties-the hydrophilic phase swells in hydrophilic media and the hydrophobic phase swells in hydrophobic media. In both types of media dissolved reagents can diffuse from the solution into the swollen phase of the polymeric conetwork. This enables loading of the hydrophilic phase of the APCNs with enzymes and indicator reagents by simple impregnation. Hydrophobic analytes can diffuse into the polymeric conetwork via its hydrophobic phase and react with indicator reagents immobilised in the hydrophilic phase at the huge internal interface between the two opposite phases.To prepare the described hydroperoxide-sensitive biosensors, we used APCN films consisting of 58% (w/w) poly(2-hydroxyethyl acrylate) (PHEA) as hydrophilic chains and 42% (w/w) polydimethylsiloxane (PDMS) as hydrophobic linkers. Horseradish peroxidase (HRP) and diammonium 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (ABTS) as indicator reagent were co-immobilised in this optically clear and transparent matrix. In this feasibility study the conditions investigated were principally those relevant to characterisation of the innovative matrix material and the disposable biosensor produced from it; the biosensor was not optimised. Sensitivity toward tert-butylhydroperoxide (tBuOOH) dissolved in n-heptane was acceptable, between approximately 1 and at least 50 mmol L(-1), even in the dry state. The response time was 1.7 to 5.0 min. No leaching of immobilised reagents was observed during a period of at least one hour. Pre-swelling the sensors with water increased the reaction rate and the total turnover number of the enzyme. In a dry atmosphere at 4 degrees C the sensors were found to be stable for at least two weeks.

Amphiphilic Polymethacrylate Model Co-Networks: Synthesis by RAFT Radical Polymerization and Characterization of the Swelling Behavior

Reversible addition−fragmentation chain transfer (RAFT) controlled radical polymerization was employed, for the first time, to prepare well-defined (model) amphiphilic polymer co-networks based on n-butyl methacrylate (BuMA, hydrophobic monomer) and 2-(dimethylamino)ethyl methacrylate (DMAEMA, hydrophilic ionizable monomer) cross-linked with ethylene glycol dimethacrylate (EGDMA) and bearing elastic chains having the following comonomer distributions: BuMA-b-DMAEMA-b-BuMA and DMAEMA-b-BuMA-b-DMAEMA triblock and BuMA-co-DMAEMA statistical copolymers. Two randomly cross-linked (not model) amphiphilic co-networks were also synthesized, the one by RAFT and the other by conventional free radical polymerization. The amphiphilic triblock copolymer-based model co-networks were obtained by stepwise synthesis in three stages: (1) the synthesis of linear homopolymers bearing two active ends by using a bifunctional chain transfer agent (CTA), (2) the sequential addition of the second monomer on the macro-CTAs (homopolymers) to yield linear ABA or BAB triblock copolymers, and (3) the inter-linking of the linear copolymer chains at both ends using EGDMA cross-linker to form the final model co-networks. The homopolymer and copolymer precursors to the networks were characterized using gel permeation chromatography and 1H NMR spectroscopy. The swelling behavior of the networks was investigated in tetrahydrofuran and water. The co-networks swelled more in acidic than in neutral water due to the ionization of their DMAEMA units. The low pH aqueous swelling of the statistical co-network was higher than those of its triblock counterparts due to the lack of microphase separation with the statistical copolymer chains.