Amount Of Bone Ingrowth Research Articles

Histological characteristics of bone in-growth of proximal humeral implants with different spatial structures.

This study compares the longitudinal histological characteristics of proximal humeral implants with different spatial structures in rabbits. Thirty skeletally-mature male rabbits were divided into a trabecular structure group and regular hexahedron structure group according to the different spatial structures of a biological titanium alloy screw inserted into the greater tuberosity of the proximal humerus. Samples were collected 3, 6, and 12 weeks after the implantation surgery. Histological results showed that the amount of bone in-growth in the porous cavity of the screw implant increased over time. Quantitative analysis showed there was significantly more bone in-growth in the trabecular structure group than the classic structure group 3 weeks (25.4% ± 6.9% vs 19.6% ± 3.7%, P < 0.05) and 6 weeks (31.2% ± 1.7% vs 26.9% ± 5.3, P < 0.05) after the implantation surgery. No significant difference was detected between the two groups 12 weeks after the surgery (41.7% ± 2.5% vs 39% ± 4.1%, P > 0.05). Our data found that bone in-growth significantly differed among the three time points (P < 0.05) in both groups, but not between the implants with different spatial structures 12 weeks after the surgery.

Characterization of bone ingrowth and interface mechanics of a new porous 3D printed biomaterial

The purpose of this study was to evaluate the biological fixation of a 3D printed porous implant, with and without different hydroxyapatite (HA) coatings, in a canine model. A canine transcortical model was used to evaluate the characteristics of bone ingrowth of Ti6Al4V cylindrical implants fabricated using laser rapid manufacturing (LRM). At four and 12 weeks post-implantation, we performed histological analysis and mechanical push-out testing on three groups of implants: a HA-free control (LRM), LRM with precipitated HA (LRM-PA), and LRM with plasma-sprayed HA (LRM-PSHA). Substantial bone ingrowth was observed in all LRM implants, with and without HA, at both time periods. Bone ingrowth increased from 42% to 52% at four weeks, to 60% to 65% at 12 weeks. Mechanical tests indicated a minimum shear fixation strength of 20 MPa to 24 MPa at four weeks, and 34 MPa to 40 MPa at 12 weeks. There was no significant difference in the amount of bone ingrowth or in the shear strength between the three implant types at either time period. At four and 12 weeks, the 3D printed porous implants exhibited consistent bone ingrowth and high mechanical shear strength. Based on the results of this study, we confirmed the suitability of this novel new additive manufacturing porous material for biological fixation by bone ingrowth. Cite this article: Bone Joint J 2019;101-B(6 Supple B):62-67.

Influence of Implant Surface Texture Design on Peri-Acetabular Bone Ingrowth: A Mechanobiology Based Finite Element Analysis.

The fixation of uncemented acetabular components largely depends on the amount of bone ingrowth, which is influenced by the design of the implant surface texture. The objective of this numerical study is to evaluate the effect of these implant texture design factors on bone ingrowth around an acetabular component. The novelty of this study lies in comparative finite element (FE) analysis of 3D microscale models of the implant-bone interface, considering patient-specific mechanical environment, host bone material property and implant-bone relative displacement, in combination with sequential mechanoregulatory algorithm and design of experiment (DOE) based statistical framework. Results indicated that the bone ingrowth process was inhibited due to an increase in interbead spacing from 200 μm to 600 μm and bead diameter from 1000 μm to 1500 μm and a reduction in bead height from 900 μm to 600 μm. Bead height, a main effect, was found to have a predominant influence on bone ingrowth. Among the interaction effects, the combination of bead height and bead diameter was found to have a pronounced influence on bone ingrowth process. A combination of low interbead spacing (P = 200 μm), low bead diameter (D = 1000 μm), and high bead height (H = 900 μm) facilitated peri-acetabular bone ingrowth and an increase in average Young's modulus of newly formed tissue layer. Hence, such a surface texture design seemed to provide improved fixation of the acetabular component.

Vertical bone augmentation with 3D‐synthetic monetite blocks in the rabbit calvaria

Long-term success of osteointegrated dental implants requires sufficient volume of healthy bone at the recipient sites. However, this is frequently lacking as a result of trauma, tooth loss, or infection. Onlay autografting is amongst the most predictable techniques for craniofacial vertical bone augmentation, however, complications related to donor site morbidity are common and alternatives to onlay autografts are desirable. To develop and evaluate a new synthetic onlay block for vertical bone augmentation. Sixteen synthetic monetite monolithic discs-shaped blocks were prepared using a 3D-printing technique. The blocks were computer-designed, and had a diameter of 9.0mm, a thickness of either 4.0mm (n=8) or 3.0mm (n=8) and one 0.5-mm wide central hole that enabled their surgical fixation with osteosynthesis screws. The blocks were randomly allocated to each side of the calvaria (right or left) of eight New Zealand rabbits and fixed with screws to achieve vertical bone augmentation. Eight weeks after the surgical intervention, the animals were sacrificed and the calvaria were retrieved for histological analysis. The following parameters were analysed: the interaction between the graft and the original bone surface, the amount of bone ingrowth within the graft and the gain in bone height achieved by the procedure. Wilcoxon t-test was used to evaluate significant differences between the two types of monetite bone block grafts. The blocks were easy to handle and no damage or fracture was registered while being screw-fixated to the calvarial bone. As a result, the surgical procedure was easy and quick. After a healing of 8weeks, the synthetic blocks were strongly fused to the calvarial bone surface. Upon histological observation, the monetite blocks appeared to be infiltrated by newly formed bone, without histological signs of necrosis, osteolysis or foreign body reaction. Histomorphometry revealed that bone augmentation occurred within and over the monetite block. The 4.0- and 3.0-mm high blocks were filled with newly formed bone with 35% and 41% of their respective volumes. These observations indicated that craniofacial bone augmentations of at least 4mm could be achieved with synthetic monetite blocks. Within the limits of our study, this novel material may be able to eliminate the need for autologous bone transplantation for the augmentation of large vertical bone defects.

Evaluation of bone ingrowth into porous titanium implant: histomorphometric analysis in rabbits

A porous material for bone ingrowth with adequate pore structure and appropriate mechanical properties has long been sought as the ideal bone-implant interface. This study aimed to assess in vivo the influence of three types of porous titanium implant on the new bone ingrowth. The implants were produced by means of a powder metallurgy technique with different porosities and pore sizes: Group 1 = 30 % and 180 µm; Group 2 = 30% and 300 µm; and Group 3 = 40% and 180 µm;. Six rabbits received one implant of each type in the right and left tibiae and were sacrificed 8 weeks after surgery for histological and histomorphometric analyses. Histological analysis confirmed new bone in contact with the implant, formed in direction of pores. Histomorphometric evaluation demonstrated that the new bone formation was statistically significantly lower in the group G1 than in group G3, (P = 0.023). Based on these results, increased porosity and pore size were concluded to have a positive effect on the amount of bone ingrowth.

Cancellous Bone Osseointegration Is Enhanced byIn VivoLoading

Biophysical stimuli may be an effective therapy to counteract age-related changes in bone structure that affect the primary stability of implants used in joint replacement or fracture fixation. The influence of controlled mechanical loading on osseointegration was investigated using an in vivo device implanted in the distal lateral femur of 12 male rabbits. Compressive loads (1 MPa, 1 Hz, 50 cycles/day, 4 weeks) were applied to a porous titanium foam implant and the underlying cancellous bone. The contralateral limbs served as nonloaded controls. Backscattered electron imaging indicated that the amount of bone ingrowth was significantly greater in the loaded limb than in the nonloaded control limb, whereas the amount of underlying cancellous periprosthetic bone was similar. No significant difference in the mineral apposition rate of the bone ingrowth or periprosthetic bone was measured in the loaded compared to the control limb. Histological analysis demonstrated newly formed woven bone in direct apposition to the implant coating, with a lack of fibrous tissue at the implant-periprosthetic bone interface in both loaded and nonloaded implants. The lack of fibrous tissue demonstrates that mechanical stimulation using this model significantly enhanced cancellous bone ingrowth without the detrimental effects of micromotion. These results suggest that biophysical therapy should be further investigated to augment current treatments to enhance long-term fixation of orthopedic devices. Additionally, this novel in vivo loading model can be used to further investigate the influence of biophysical stimulation on other tissue engineering approaches requiring bone ingrowth into both metallic and nonmetallic cell-seeded scaffolds.

Osseointegration into a novel titanium foam implant in the distal femur of a rabbit

A novel porous titanium foam implant has recently been developed to enhance biological fixation of orthopaedic implants to bone. The aim of this study was to examine the mechanical and histological characteristics of bone apposition into two different pore sizes of this titanium foam (565 and 464 micron mean void intercept length) and to compare these characteristics to those obtained with a fully porous conventionally sintered titanium bead implant. Cylindrical implants were studied in a rabbit distal femoral intramedullary osseointegration model at time zero and at 3, 6, and 12 weeks. The amount of bone ingrowth, amount of periprosthetic bone, and mineral apposition rate of periprosthetic bone measured did not differ among the three implant designs at 3, 6, or 12 weeks. By 12 weeks, the interface stiffness and maximum load of the beaded implant was significantly greater than either foam implant. No significant difference was found in the interface stiffness or maximum load between the two foam implant designs at 3, 6, or 12 weeks. The lower compressive modulus of the foam compared to the more dense sintered beaded implants likely contributed to the difference in failure mode. However, the foam implants have a similar compressive modulus to other clinically successful coatings, suggesting they are nonetheless clinically adequate. Additional studies are required to confirm this in weight-bearing models. Histological data suggest that these novel titanium foam implants are a promising alternative to current porous coatings and should be further investigated for clinical application in cementless joint replacement.

No effect of ketoprofen and meloxicam on bone graft ingrowth: A bone chamber study in goats

Background and purpose There is increasing awareness that non‐steroidal anti‐inflammatory drugs (NSAIDs), and especially the cyclooxygenase‐2 (COX‐2) selective ones, may retard bone healing. We have used NSAIDs (indomethacin for at least 7 days) to prevent heterotopic ossification after acetabular reconstructions using impacted bone grafts. The long‐term clinical results have been satisfying, making it difficult to believe that there is an important negative effect of NSAIDs on graft incorporation. We studied the effect of two different NSAIDs on bone and tissue ingrowth in a bone chamber model in goats, using autograft, rinsed allograft, and allograft that had been rinsed and subsequently irradiated.Methods 9 goats received no NSAIDs, 9 received ketoprofen, and 9 received meloxicam—all for 6 weeks. In each goat 6 bone chambers were implanted: 2 filled with autograft, 2 with rinsed allograft, and 2 with allograft that had been rinsed and irradiated. The amount of bone ingrowth and total tissue ingrowth was compared between the groups.Results There were no statistically significant differences in bone ingrowth between the different groups. Also, no differences in bone ingrowth were found with respect to the type of graft used. Furthermore, there was no statistically significant difference in the total amount of ingrowth of fibrous tissue between the treatment groups.Interpretation No differences in bone ingrowth in titanium bone chambers could be detected with both ketoprofen and meloxicam compared to untreated control animals. This confirms our hypothesis that the effect of NSAIDs on the incorporation and ingrowth of bone graft is limited.

Novel Micro-CT Based 3-Dimentional Structural Analyses of Porous Biomaterials

A porous structure comprises pores and pore throats with a complex three-dimensional network structure, and many investigators have described the relationship between average pore size and the amount of bone ingrowth. However, the influence of network structure or pore throats for tissue ingrowth has rarely been discussed. Bioactive porous titanium implants with 48% porosity were analyzed using specific algorithms for three-dimensional analysis of interconnectivity based on a micro focus X-ray computed tomography system. In vivo histological analysis was performed using the very same implants implanted into the femoral condyles of male rabbits for 6 weeks. This matching study revealed that more poorly differentiated pores tended to have narrow pore throats, especially in their shorter routes to the outside. Data obtained suggest that this sort of novel analysis is useful for evaluating bone and tissue ingrowth into porous biomaterials.

Pore throat size and connectivity determine bone and tissue ingrowth into porous implants: Three-dimensional micro-CT based structural analyses of porous bioactive titanium implants

A porous structure comprises pores and pore throats with a complex three-dimensional (3D) network structure, and many investigators have described the relationship between average pore size and the amount of bone ingrowth. However, the influence of network structure or pore throats for tissue ingrowth has rarely been discussed. Four types of bioactive porous titanium implants with different pore sizes and porosities (6mm in diameter and 15 mm long) were analyzed using specific algorithms for 3D analysis of interconnectivity based on a micro focus X-ray computed tomography system. In vivo histomorphometric analysis was performed using the very same implants implanted into the femoral condyles of male rabbits for 6 and 12 weeks. This matching study revealed that more poorly differentiated pores tended to have narrow pore throats, especially in their shorter routes to the outside. In addition, for assessment of the entire implant, we proposed new two indices that represent the degree of bone and tissue ingrowth into an implant by considering the effect of narrow pore throats. Data obtained suggest that this sort of novel analysis is useful for evaluating bone and tissue ingrowth into porous biomaterials.

TGF‐β1‐enhanced TCP‐coated sensate scaffolds can detect bone bonding

Porous polybutylene terephthalate (PBT) scaffold systems were tested as orthopedic implants to determine whether these scaffolds could be used to detect strain transfer following bone growth into the scaffold. Three types of scaffold systems were tested: porous PBT scaffolds, porous PBT scaffolds with a thin beta-tricalcium phosphate coating (LC-PBT), and porous PBT scaffolds with the TCP coating vacuum packed into the scaffold pores (VI-PBT). In addition, the effect of applying TGF-beta1 to scaffolds as an enhancement was examined. The scaffolds were placed onto the femora of rats and left in vivo for 4 months. The amount of bone ingrowth and the strain transfer through various scaffolds was evaluated by using scanning electron microscopy, histology, histomorphometry, and cantilever bend testing. The VI-PBT scaffold showed the highest and most consistent degree of mechanical interaction between bone and scaffold, providing strain transfers of 68.5% (+/-20.6) and 79.2% (+/-8.7) of control scaffolds in tension and compression, respectively. The strain transfer through the VI-PBT scaffold decreased to 29.1% (+/-24.3) and 30.4% (+/-25.8) in tension and compression when used with TGF-beta1. TGF-beta1 enhancement increased the strain transfer through LC-PBT scaffolds in compression from 9.4% (+/-8.7) to 49.7% (+/-31.0). The significant changes in mechanical strain transfer through LC-PBT and VI-PBT scaffolds correlated with changes in bone ingrowth fraction, which was increased by 39.6% in LC-PBT scaffolds and was decreased 21.3% in VI-PBT scaffolds after TGF-beta1 enhancement. Overall, the results indicate that strain transfer through TCP-coated PBT scaffolds correlate with bone ingrowth after implantation, making these instrumented scaffolds useful for monitoring bone growth by monitoring strain transfer.

The effects of sex and estrogen therapy on bone ingrowth into porous coated implant

Amounts of bone ingrowth into porous cobalt–chromium plugs were compared between male and female dogs, and among sham-operated and ovariectomized female dogs, with or without estrogen treatment, to investigate the effect of gender and estrogen therapy on biologic fixation. Each group consisted of eight skeletally mature dogs. Plugs were implanted bilaterally in the distal femur at 6 months after ovariectomy or sham operation. Estrogen treatment group received estradiol 20 μg/kg/day subcutaneous injection. Three months after implantation, histological examination showed significantly more bone ingrowth in areas with cortical bone contact than in areas with cancellous bone contact ( P<0.001 for all groups). Bone ingrowth was essentially the same in male and female control dogs. Ovariectomized dogs showed less overall bone ingrowth than male and female controls ( P=0.007). Bone ingrowth in areas with cortical bone contact did not decrease significantly, whereas bone ingrowth in areas with cancellous bone contact was significantly impaired ( P<0.001) in ovariectomized dogs compared with female controls. Short-term, high-dose estradiol treatment did not increase bone ingrowth volume fraction. Mechanical tests did not show any statistical differences among groups. Conclusion: Type of bone contact is the key factor affecting the amount and pattern of bone ingrowth into the porous surface. Ovariectomy results in decreased bone ingrowth in areas with cancellous bone contact, but does not compromise bone ingrowth in areas with cortical bone contact. Short-term, high-dose estradiol treatment does not enhance bone ingrowth into the porous surface. Extensively coated or full-coated porous prostheses are recommended to achieve enough cortical bone contact and ingrowth for post-menopausal patients.

Engineered cellular response to scaffold architecture in a rabbit trephine defect.

Tight control of pore architecture in porous scaffolds for bone repair is critical for a fully elucidated tissue response. Solid freeform fabrication (SFF) enables construction of scaffolds with tightly controlled pore architecture. Four types of porous scaffolds were constructed using SFF and evaluated in an 8-mm rabbit trephine defect at 8 and 16 weeks (n = 6): a lactide/glycolide (50:50) copolymer scaffold with 20% w/w tri-calcium phosphate and random porous architecture (Group 1); another identical design made from poly(desaminotyrosyl-tyrosine ethyl ester carbonate) [poly(DTE carbonate)], a tyrosine-derived pseudo-polyamino acid (Group 2); and two poly(DTE carbonate) scaffolds containing 500 microm pores separated by 500-microm thick walls, one type with solid walls (Group 3), and one type with microporous walls (Group 4). A commercially available coralline scaffold (Interpore) with a 486-microm average pore size and empty defects were used as controls. There was no significant difference in the overall amount of bone ingrowth in any of the devices, as found by radiographic analysis, but patterns of bone formation matched the morphology of the scaffold. These results suggest that controlled scaffold architecture can be superimposed on biomaterial composition to design and construct scaffolds with improved fill time.

Pore diameter of more than 100 microm is not requisite for bone ingrowth in rabbits.

The optimal pore size for bone ingrowth is claimed to be 100-400 microm. With the use of a highly standardized experimental model, the present study reevaluated whether a pore size of 100 microm is the threshold value for bone ingrowth into porous structures under non-load-bearing conditions. Titanium triangle-shaped plates 250 or 500 microm thick were perforated with the use of a laser in order to create standard-sized holes ( 50, 75, 100, and 125 microm) in multiple rows. The amount of bone ingrowth through the implant holes was studied in the cancellous bone of the distal rabbit femur. Twelve weeks after implantation, detailed analysis of bone ingrowth was performed with computerized image analysis of backscattered electron imaging techniques of scanning electron microscopy. The results showed that the amount of ingrown new bone was independent of the pore size and implant thickness. The median value for bone ingrowth varied between 64 and 78%. A striking feature was the formation of secondary osteonal structures even in the smallest holes. Based on these results, there is no threshold value for new bone ingrowth in pore sizes ranging from 50 to 125 microm under non-load-bearing conditions.

Bone healing in porous implants: a histological and histometrical comparative study on sheep.

Tissue integration in four types of porous implant materials (Interpore 200 or Corallin hydroxyapatite, hydroxyapatite blocks, hydroxyapatite granules and polymethylmethacrylate) was evaluated in vivo. Porous blocks measuring 20 mm x 10 mm x 8 mm were implanted in mandibles and iliac crests of sheep. Bone healing in porous blocks was studied at 2 and 6 months after implantation. The behavior of the material itself was also analyzed. Histological and histomorphometrical analysis revealed bone healing depending upon healing time and material. On the basis of analysis of variance, differences in amounts of bone ingrowth at 2 and 6 months were statistically significant (p=0.0039 in mandible; p=0.0351 in iliac crest). The longer the time span, the more mineralized tissues were observed in the specimen. Our data confirmed that hydroxyapatite has osteoconductive capacities. Porous PMMA was found to be biocompatible, but it showed less bonegrowth within the pores. Interpore 200, which had the highest surface to volume ratio was found to display the highest level of osseointegration and biodegradation.

High-resolution morphometric analysis of human osteoblastic cell adhesion on clinically relevant orthopedic alloys

Understanding the cellular basis of osteoblastic cell-biomaterial interaction is crucial to the analysis of the mechanism of osseointegration, a requirement of long-term orthopedic implant stability. Clinically, the amount of bone ingrowth is variable, and cellular parameters that influence ingrowth have yet to be clearly determined. In this study, two clinically relevant orthopedic alloys, titanium Ti6A14V (Ti) and cobalt-chrome-molybdenum (CC), were used for a comparative analysis of primary human osteoblastic cell adhesion and spreading, where cell adhesion represents the initial interaction between cellular elements and the biomaterial surface. The kinetic profile of adhesion revealed enhanced cell attachment upon rough Ti surfaces relative to rough CC. Using confocal laser scanning microscopy (CLSM), we observed that, during the first 12 h of contact with the substratum, osteoblastic cells were relatively less spread on rough Ti, whereas cells appeared elongated with multiple cellular extensions on rough CC. Focal adhesion contacts, as indicated by vinculin immunostaining, were distributed throughout the cells adhering to Ti, but were relatively sparse and localized to cellular processes on CC. Furthermore, three-dimensional CLSM reconstruction analysis indicated the presence of vinculin at all membrane-to-surface contact points on both Ti and CC. On Ti, these contact points closely followed the surface contour, whereas, on CC, they were restricted to relative topographic peaks only. Actin cytoskeletal reorganization was prominent in cells cultured on Ti, with stress fibers arranged throughout the cell body, whereas, on CC, actin filaments were sparse and localized primarily to cellular extensions. Because cell attachment mechanisms are likely to influence signal transduction and regulation of gene expression, these early differential responses of osteoblastic cells on Ti and CC may have functional implications on subsequent extracellular matrix mineralization and bone ingrowth at the cell-biomaterial interface.

Effect of nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks

The present study addresses two aspects of the use of nitinol in cranial bone defect repair. The first is to verify that there is substantial bone ingrowth into the implant after 6 weeks; the second is to determine the effect of pore size on the ability of bone to grow into the implant during the early (6-week) postoperative period. Porous equiatomic (equal atomic masses of titanium and nickel) nickel–titanium (nitinol) implants with three different morphologies (differing in pore size and percent porosity) were implanted for 6 weeks in the parietal bones of New Zealand White rabbits. Ingrowth of bone into the implants and apposition of bone along the exterior and interior implant surfaces were calculated. The mean pore size (MPS) of implant type #1 (353 ± 74 μm) differed considerably from implant types #2 (218 ± 28 μm) and #3 (178 ± 31 μm). There was no significant difference among implant types in the percentages of bone and void/soft tissue composition of the aggregate implants. The amount of bone ingrowth also was not significantly different among the implant types. Implant #1 was significantly higher in pore volume and thus had a significantly higher volume of ingrown bone (2.59 ± 0.60 mm3) than implant #3 (1.52 ± 0.66 mm3) and a greater amount, but not significantly greater, than implant #2 (1.76 ± 0.47 mm3). Pore size does not appear to affect bone ingrowth during the cartilaginous period of bone growth in the implant. This implies that within the commonly accepted range of implant porosities (150–400 μm), at 6 weeks bone ingrowth near the interface of nitinol implants is similar. © 1999 John Wiley & Sons, Inc. J Biomed Mater Res, 45, 42–47, 1999.

Effect of nitinol implant porosity on cranial bone ingrowth and apposition after 6 weeks.

The present study addresses two aspects of the use of nitinol in cranial bone defect repair. The first is to verify that there is substantial bone ingrowth into the implant after 6 weeks; the second is to determine the effect of pore size on the ability of bone to grow into the implant during the early (6-week) postoperative period. Porous equiatomic (equal atomic masses of titanium and nickel) nickel-titanium (nitinol) implants with three different morphologies (differing in pore size and percent porosity) were implanted for 6 weeks in the parietal bones of New Zealand White rabbits. Ingrowth of bone into the implants and apposition of bone along the exterior and interior implant surfaces were calculated. The mean pore size (MPS) of implant type #1 (353 +/- 74 microm) differed considerably from implant types #2 (218 +/- 28 microm) and #3 (178 +/- 31 microm). There was no significant difference among implant types in the percentages of bone and void/soft tissue composition of the aggregate implants. The amount of bone ingrowth also was not significantly different among the implant types. Implant #1 was significantly higher in pore volume and thus had a significantly higher volume of ingrown bone (2.59 +/- 0.60 mm3) than implant #3 (1. 52 +/- 0.66 mm3) and a greater amount, but not significantly greater, than implant #2 (1.76 +/- 0.47 mm3). Pore size does not appear to affect bone ingrowth during the cartilaginous period of bone growth in the implant. This implies that within the commonly accepted range of implant porosities (150-400 microm), at 6 weeks bone ingrowth near the interface of nitinol implants is similar.

Integration properties of bone substitute materials. Experimental studies on animals

In order to avoid the potential risks of disease transmission in allograft surgery, numerous substitute materials have been described. As the biological response to implant materials is different, we undertook the following study to assess type and amount of bone ingrowth in CaP-ceramics. 105 cylindrical bone defects with a diameter of 5.4 mm were created surgically in the femoral condyles of 53 skeletal mature NZW rabbits. The defects were filled with crushed coralline hydroxyapatite (HA) implants (n = 21), synthetically produced hydroxyapatite (n = 21) and surface-modified alpha-Tricalciumphosphate (TCP) grains (n = 21). 21 defects were left empty and other drill holes were filled with rabbit cancellous bone cylinders (n = 21) after 3 months of cryopreservation at -78 degrees C without sterilization. Following observation periods of 2, 4, 6, 8, 12, 26 and 52 weeks the femoral condyles were harvested for histological evaluation and quantitative analysis of bone ingrowth. Woven bone formation at implant periphery can be observed in all substances as early as 2 weeks postoperatively. At 4-week-intervals cryopreserved allografts show new bone apposition on surfaces of necrotic trabeculae and graft-host junctions by a predominantly osteoblastic reaction at the periphery of all cylinders, while in HA- and TCP-grains early bone formation in the center of drill holes is detectable as well. There is a direct contact between HA-/TCP-particles and newly formed bone without fibrous tissue formation at the implant surfaces. Central new bone formation in rabbit allografts can be observed after 6 to 8 weeks together with a secondary osteoclastic resorption of necrotic transplant trabeculae. The result of this remodeling process is a complete degradation of transplant cylinders with reorganization of vital trabeculae oriented in a mature pattern after 12 to 26 weeks. In contrast the HA- and TCP-implants did not show any signs of resorption.

Postmortem Analysis of Bone Growth into Porous-Coated Acetabular Components*

Microradiography, backscattered electron microscopy, and histological analysis were used to conduct a quantitative postmortem study of seven consecutively retrieved anatomical porous replacement acetabular components that had been inserted during total hip arthroplasties. Screws had been used for the initial fixation of six components. The microradiographic analysis of all seven components showed that an average (and standard deviation) of 84 +/- 9 per cent (range, 72 to 93 per cent) of the porous coating was in direct apposition to the periprosthetic bone. The backscattered electron images demonstrated that an average of 12 +/- 6 per cent (range, 4 to 21 per cent) of the space available in the porous coating was occupied by ingrown bone. The amount of bone ingrowth was not significantly different among the three zones delineated by DeLee and Charnley. Uniformity of bone growth into the porous coating suggests that the preferential loading that occurs in the superior region did not differentially affect the bone ingrowth. The present study showed that consistent bone growth into anatomical porous replacement acetabular components can be achieved.